Give your Rigid Industries Dually or D2 LED lights an extra layer of defense with this black snap-on polycarbonate cover. Made from impact-resistant polycarbonate, it shields the lens from road debris, rocks, and grime without altering light output when removed. The tool-free design simply snaps on and off in seconds, making it ideal for areas that require covered auxiliary lighting or for occasional protection during trail runs and weather events.

• Direct-fit protective cover for Rigid Industries Dually and D2 lights
• Durable polycarbonate construction absorbs minor impacts
• Snap-on, snap-off installation—no tools needed
• Maintains a clean, low-profile appearance when installed
• Available in black, clear, amber, or smoked (this cover is black)
• Helps satisfy light-cover regulations in certain jurisdictions

The Rigid Industries E2 Series 10-inch Drive Beam LED light bar delivers rugged, high-output illumination for off-road, powersports, marine, automotive, and first responder use. This double-row light bar features an efficient Drive beam pattern that balances long-range projection with wide visibility for high-speed or trail driving.

Leveraging upgraded LED technology, the E2 Series produces up to 111% more raw lumens than previous E-Series models. Blacked-out circuit boards, refined RIGID branding, and an integrated thermal management system improve both appearance and reliability. The slim aluminum housing is protected by a UV-resistant powder coat, while the impact-resistant polycarbonate lens withstands harsh environments.

Key Features and Specifications:

• 10-inch double-row LED light bar with Drive beam pattern
• Up to 111% more lumens than earlier E-Series generations
• High-grade aluminum alloy housing with durable UV-resistant powder coat
• Impact-resistant polycarbonate lens
• IP68 dust/water ingress protection
• SAE J575 compliant — shock and vibration tested
• Integrated thermal management system
• Reverse polarity and over/under voltage protection
• RFI/EMI protection
• Waterproof connector (exclusions apply)
• 50,000+ hour LED lifespan
• Operating voltage: 9-36V DC
• RoHS compliant

The Rigid Industries Phoenix XL 7-inch LED light pod delivers over 14,000 lumens with five selectable color modes—Cool White, Natural, Full Power, Warm, and Amber—switchable at the push of a button without leaving the cab. Built for UTVs, overland rigs, and trail-ready vehicles, it features three power modes to optimize your vehicle’s electrical system and three interchangeable lens options (Spot, Drive, Combo) for precise beam customization. Rugged construction includes a cast aluminum housing and bezel, a Deutsch connector, and IP68 dust/water ingress protection.

• Over 14,000 lumens output
• 5 selectable color modes: Cool White, Natural, Full Power, Warm, Amber
• 3 power modes to manage current draw
• 3 interchangeable lenses: Spot, Drive, Combo
• IP68-rated dust and water resistance
• Cast aluminum housing and bezel
• Deutsch connector
• Swappable lens for beam customization

The Rigid Industries Phoenix 5-inch LED light pod delivers over 10,000 raw lumens and instant color switching. Five color modes—Cool White, Natural, Full Power, Warm, and Amber—are selectable at the push of a button, no cab exit required. Three power modes optimize output for your vehicle’s electrical system, while interchangeable Spot, Drive, and Combo lenses let you dial in the beam pattern for any terrain.

• 10,000+ lumens
• 5 color modes: Cool White, Natural, Full Power, Warm, Amber
• 3 power modes
• Interchangeable lens system (Spot, Drive, Combo)
• IP68 dust/water ingress rating
• Cast aluminum housing and bezel
• Deutsch connector
• Single pod — MPN 168240

The Rigid Industries 50-inch E-Series combo LED light bar features Drive and Hyperspot optics to deliver a precise blend of long-range reach and wide driving coverage. With recent LED advancements, it produces up to 111% more raw lumens than previous E-Series models. The dual-row design integrates a thermal management system for consistent output in demanding conditions.

Constructed from high-grade aluminum alloy with a durable UV-resistant powder coat, the housing stands up to harsh environments. The impact-resistant polycarbonate lens meets IP68 standards for dust and water ingress, while SAE J575 compliance ensures shock and vibration resistance. Internal protection includes over/under voltage, reverse polarity, and RFI/EMI shielding. The LEDs are rated for over 50,000 hours and operate on 9-36V DC. A waterproof connector is included (exclusions apply).

• 50-inch length, dual-row LED configuration
• Combo beam: Drive/Hyperspot optics
• IP68 dust/water ingress protection
• SAE J575 shock/vibration compliant
• High-grade aluminum alloy with UV powder coat
• Impact-resistant polycarbonate lens
• Integrated thermal management
• Over/under voltage and reverse polarity protection
• RFI/EMI protection; RoHS compliant
• 50,000+ hour LED lifespan
• 9-36V DC operating range
• Includes waterproof connector (exclusions apply)

The Rigid Industries E-Series PRO 50-inch Spot/Flood Combo LED light bar delivers a versatile lighting solution for off-road, marine, and automotive use. This double-row bar combines long-range spot and wide flood beams in one unit, with PRO-series LEDs producing up to 111% more lumens than the prior generation. A robust aluminum housing with UV-resistant powder coat and a tough polycarbonate lens protect the advanced internals, while an integrated thermal management system ensures consistent output and reliability over its 50,000+ hour lifespan. Fully sealed to IP68 standards and backed by built-in circuit protections, the E-Series PRO thrives in harsh environments.

• Spot/Flood combo beam pattern
• 50-inch double-row design
• Up to 111% more raw lumens (vs. previous E-Series)
• High-grade aluminum alloy housing with UV-resistant powder coat
• Impact-resistant polycarbonate lens
• IP68 rated — dust-tight and protected against water ingress
• SAE J575 compliant for shock and vibration resistance
• Integrated thermal management system
• Waterproof connector (exclusions apply)
• Over/under voltage protection
• Reverse polarity protection
• RFI/EMI protection
• RoHS compliant
• 9-36V DC operating range
• 50,000+ hour LED lifespan

Rigid Industries 50-inch E-Series Spot light bar in Midnight Edition combines a subtle daytime presence with high-output LED performance for off-road, marine, and general automotive use. The Midnight Edition features a transparent black enamel coating over Rigid's patented hybrid spot optics and all-black hardware, delivering a cohesive, low-profile look while increasing raw light output compared to earlier E-Series models.

• Translucent black enamel on patented hybrid spot optics
• Special black polymer-coated circuit board
• Integrated thermal management system
• Impact-resistant polycarbonate lens
• Durable UV-resistant powder coat finish
• High-grade aluminum alloy housing
• Over/under voltage and reverse polarity protection
• RFI/EMI protection
• 9-36V DC input
• 50,000+ hour LED lifespan
• All black oxide assembly hardware

The Rigid Industries 40-inch E-Series dual-row LED light bar provides a versatile Spot/Flood combo beam pattern, combining a focused spot for long-range visibility with a wide flood for peripheral lighting. The housing is constructed from high-grade aluminum alloy with a UV-resistant powder coat finish, while the lens is impact-resistant polycarbonate. The light bar is sealed to IP68 standards for dust and water ingress protection, and it includes an integrated thermal management system for reliable operation. Its 9–36V DC input range and built-in reverse polarity and over/under voltage protection allow it to be used in a variety of 12V and 24V electrical systems. Common applications include off-road vehicles, marine craft, powersports, general automotive auxiliary lighting, and first responder vehicles.

• Spot/Flood combo beam pattern
• High-grade aluminum alloy housing
• UV-resistant powder coat finish
• Impact-resistant polycarbonate lens
• IP68 dust and water ingress protection
• SAE J575 compliant for shock and vibration resistance
• Integrated thermal management
• Over/under voltage and reverse polarity protection
• RFI/EMI shielding
• RoHS compliant
• Waterproof connector (exclusions apply)
• 9–36V DC input
• LED lifespan: 50,000+ hours

Rigid Industries’ 40-inch E-Series Spot Midnight Edition LED light bar delivers intense long-range illumination with a stealth blacked-out appearance. The Midnight Edition features a transparent black enamel coating on patented hybrid spot optics, a black polymer-coated circuit board, and black oxide hardware for a low-profile look that disappears during the day. Enhanced LED technology produces up to 111% more lumens than previous E-Series lights, making it ideal for off-road, powersports, marine, and automotive applications where powerful, focused light is critical.

• Patented hybrid spot optics with translucent black enamel coating (Midnight Optics)
• Black polymer-coated circuit board and black oxide assembly hardware
• Integrated thermal management system
• Impact-resistant polycarbonate lens
• Durable UV-resistant powder coat finish
• High-grade aluminum alloy housing
• Over/under voltage and reverse polarity protection
• RFI/EMI protection
• Wide 9-36V DC operating range
• 50,000+ hour lifespan

This 40-inch E-Series light bar is engineered for reliability in harsh environments and includes all necessary black hardware for installation.

The Rigid Industries 30-inch E2 Series LED light bar delivers a versatile double-row lighting solution with a combination Drive and Hyperspot beam pattern. Designed to perform in demanding conditions, this light bar is equally at home on off-road trails, marine vessels, powersports rigs, and work trucks.

Key features:

• Combo optic: Drive beam for distance and Hyperspot for a focused long-range hot spot
• Integrated thermal management system
• Durable UV-resistant powder coat finish
• Impact-resistant polycarbonate lens
• High-grade aluminum alloy housing
• IP68 rated — dust-tight and waterproof
• SAE J575 compliant for shock and vibration
• Over/under voltage protection
• Reverse polarity protection
• RFI/EMI protection
• RoHS compliant
• Operating voltage: 9-36 V DC
• 50,000+ hour LED lifespan
• Includes waterproof connector (exclusions apply)

Protect your Rigid Industries RDS SR-Series Pro LED light bar with this 11-inch snap-on polycarbonate light cover. Sold as a single 11-inch section, it pairs with 10-inch covers (available separately) for complete lens coverage on 20", 30", 40", and 50" light bars. The durable polycarbonate shields the lens from road debris, trail hazards, and UV exposure without sacrificing your custom look.

Key Features:

• Snap-on installation – attaches and removes in seconds without tools
• Made from impact-resistant polycarbonate plastic for added lens protection
• Available in black (this option), also offered in amber, clear, and smoke
• Helps satisfy trail or state requirements for covered off-road lights
• Coverage guide for full light bar protection (10" covers sold separately):
  20" bar: 1x10" + 1x11"
  30" bar: 2x10" + 1x11"
  40" bar: 3x10" + 1x11"
  50" bar: 4x10" + 1x11"
• Includes: (1) 11-inch light cover – Rigid Industries part number 131794

Protect your Rigid SR-Series Pro LED light bar and add a customized look with this yellow polycarbonate light cover. It snaps securely onto the 10-inch sections of your bar, shielding the lens from debris, trail damage, and weather while meeting requirements for road-legal accessory light covers in many areas. The durable polycarbonate construction offers an extra layer of defense without sacrificing light output.

• Fits 10-inch segments of RDS SR-Series PRO LED light bars (sold individually)
• Snap-on design makes installation and removal tool-free
• Durable, lightweight polycarbonate plastic resists impact and UV exposure
• Adds a yellow accent for a distinctive off-road appearance
• Also available in clear, smoke, and black (sold separately)

For complete bar coverage, combine with the 11-inch cover: a 20" bar requires one 10" and one 11" cover; a 30" bar requires two 10" and one 11" cover; a 40" bar requires three 10" and one 11" cover; a 50" bar requires four 10" and one 11" cover.

The Rigid Industries 30-inch E-Series PRO Spot/Flood Combo LED light bar is a high-output double-row lighting solution built for off-road, marine, powersports, and utility use. Its hybrid spot/flood beam delivers both long-range illumination and wide spread, while recent LED advancements push raw lumen output up to 111% higher than previous E-Series generations. An integrated thermal management system, rugged aluminum housing, and impact-resistant polycarbonate lens ensure reliable performance in harsh conditions.

• Spot/Flood combo beam pattern
• 30-inch double-row LED array
• Up to 111% more lumens than earlier E-Series
• IP68 dust/water ingress protection
• Impact-resistant polycarbonate lens
• High-grade aluminum alloy housing with UV-resistant powder coat
• Integrated thermal management
• 9-36V DC input range with over/under voltage and reverse polarity protection
• SAE J575 compliant for shock/vibration
• RFI/EMI shielding
• RoHS compliant
• 50,000+ hour LED lifespan
• Waterproof connector (exclusions apply)
• Prominent RIGID branding and blacked-out circuit boards
• Includes installation instructions

The Rigid Industries 30-inch E-Series Spot LED light bar in Midnight Edition delivers a concentrated long-range beam with stealth black-on-black styling. Updated E-Series LED technology produces up to 111% more raw lumens than earlier versions, while the patented hybrid spot optics with translucent black enamel coating maintain a low-profile appearance during the day without sacrificing nighttime output.

Every component reflects the Midnight theme: black oxide assembly hardware, a special black polymer-coated circuit board, and a durable UV-resistant black powder coat over the high-grade aluminum alloy housing. Integrated thermal management and advanced circuit protections (over/under voltage, reverse polarity, RFI/EMI) ensure reliable operation across 9-36V DC systems, and the impact-resistant polycarbonate lens seals out moisture and debris.

• Translucent black enamel on patented hybrid spot optics
• Black polymer-coated circuit board
• Black oxide hardware
• High-grade aluminum alloy with UV-resistant black powder coat
• Impact-resistant polycarbonate lens
• Integrated thermal management
• Over/under voltage protection
• Reverse polarity protection
• RFI/EMI protection
• 9-36V DC input
• 50,000+ hour LED lifespan

Ideal for off-road trucks, SUVs, UTVs, marine vessels, and any application demanding powerful, reliable auxiliary lighting with a subtle daytime appearance.

The Rigid Industries 20-inch E2 Series combo light bar pairs a wide, long-reaching Drive beam with a focal Hyperspot beam for maximum versatility. Built on a high-grade aluminum frame with a durable UV-resistant powder coat, it withstands shock, vibration, dust, and water immersion. The impact-resistant polycarbonate lens protects advanced LEDs rated for over 50,000 hours. Integrated thermal management, reverse polarity protection, and 9-36V DC input ensure reliable operation across off-road, marine, powersports, and automotive applications.

• Beam pattern: Combo (Drive/Hyperspot)
• IP68 dust and water ingress protection
• SAE J575 shock/vibration compliant
• Impact-resistant polycarbonate lens
• High-grade aluminum alloy housing
• UV-resistant powder coat finish
• Integrated thermal management
• Over/under voltage protection
• Reverse polarity protection
• RFI/EMI protection
• RoHS compliant
• Operating voltage: 9-36V DC
• 50,000+ hour LED lifespan
• Waterproof connector (exclusions apply)
• Part number: 122313

The Rigid Industries E-Series Pro 20-inch double-row LED light bar brings a refined look and upgraded output for demanding off-road, marine, powersports, and first-responder applications. This driving beam pattern provides exceptional long-distance visibility while maintaining a wide peripheral spread.

• Up to 111% more raw lumens than previous generations
• High-grade aluminum alloy housing with durable UV-resistant powder coat
• Impact-resistant polycarbonate lens
• IP68 rated – dust‑tight and protected against water immersion
• SAE J575 compliant for shock and vibration resistance
• Integrated thermal management system prevents overheating
• 9–36V DC operation with over/under voltage and reverse polarity protection
• RFI/EMI protection and RoHS compliant
• 50,000+ hour LED lifespan
• Includes waterproof connector (exclusions apply)

The E-Series is one of RIGIDs most versatile, all-around lighting solutions, and recent enhancements in LED technology delivering up to 111 percent more raw lumens than ever before with the E-Series PRO. Among RIGIDs most popular product lines, the E-Series PRO has recently benefited from several upgrades to improve both looks and performance. Plus, prominent RIGID branding and blacked-out circuit boards give the E-Series PRO a refined look. Available with your choice of optics, the E-Series features a host of beam options, including Spot, Flood, Driving, Hyperspot, Diffused, Driving/Spot combo, Spot/Flood combo, Spot/Hyperspot combo, and Midnight Edition. These and other innovations make it one of the brightest and most efficient LED light bars on the market. The E-Series was born in off-road, but its versatility makes it well suited for use with power sports, marine, general automotive and even first responder applications. Own The Night with RIGIDs E-Series double row LED light bar.

• Waterproof Connector (Exclusions Apply)
• Integrated Thermal Management System
• SAE J575 Compliant - Shock/Vibration
• Impact Resistant Polycarbonate Lens
• IP68 Compliant - Dust/Water Ingress
• Durable UV Resistant Powder Coat
• Over/Under Voltage Protection
• Reverse Polarity Protection
• High-Grade Aluminum Alloy
• 50000 Plus Hour Lifespan
• RFI/EMI Protection
• RoHS Compliant
• 9-36 V DC

Rigid Industries E-Series 20-inch Midnight Edition Spot LED Light Bar delivers a stealthy blacked-out appearance without sacrificing performance. The exclusive Midnight Optics feature a transparent black enamel coating on Rigid's patented hybrid spot optics, paired with black oxide hardware and a black polymer-coated circuit board to disappear during the day. When darkness falls, advanced LED technology provides intense, focused spot beam illumination for off-road, marine, powersports, and general automotive use.

• Translucent black enamel on patented hybrid spot optics
• Black polymer-coated circuit board
• Integrated thermal management system
• Impact-resistant polycarbonate lens
• Durable UV-resistant powder coat
• High-grade aluminum alloy housing
• All black assembly hardware
• Over/under voltage protection
• Reverse polarity protection
• RFI/EMI protection
• 9-36V DC input range
• 50,000+ hour LED lifespan

The Rigid Industries E-Series 20-inch Spot LED light bar delivers focused, long-distance illumination from a durable double-row design. Engineered for off-road use and equally suited to powersports, marine, and utility applications, this light bar combines rugged construction with advanced protection circuitry.

Key features:

• Spot beam pattern for maximum distance
• 20-inch length, double-row LED configuration
• Impact-resistant polycarbonate lens
• Durable UV-resistant powder coat finish
• High-grade aluminum alloy housing
• Integrated thermal management system
• IP68 rated – dust and water ingress protection
• SAE J575 compliant for shock and vibration
• Over/under voltage and reverse polarity protection
• RFI/EMI protection and RoHS compliant
• Waterproof connector (exclusions apply)
• 50,000+ hour LED lifespan
• Operating voltage: 9-36 V DC

Included hardware and wiring ensure straightforward installation, while the blacked-out circuit boards and prominent Rigid branding provide a refined, rugged appearance.

This 20-inch Rigid Industries E-Series PRO LED light bar delivers a wide flood beam pattern, now with up to 111% more raw lumens than earlier E-Series models. Engineered for demanding off-road, powersports, marine, and first-responder applications, it combines robust construction with advanced electronic safeguards to perform reliably in harsh environments.

• Flood beam pattern for broad, even illumination
• Up to 111% more raw lumens vs. previous E-Series
• High-grade aluminum alloy housing with UV-resistant powder coat
• Impact-resistant polycarbonate lens
• IP68 rated — fully sealed against dust and water ingress
• Integrated thermal management system
• SAE J575 compliant for shock and vibration resistance
• Over/under voltage and reverse polarity protection
• Waterproof connector (exclusions apply)
• RFI/EMI protection, RoHS compliant
• 9-36V DC operating range, 50,000+ hour LED lifespan

Protect your Rigid Industries E/RDS Series 10-inch LED light while adding a functional Amber PRO color that cuts through dust, smoke, and low-visibility conditions. This snap-on light cover is crafted from durable polycarbonate plastic, providing an extra shield against rocks, debris, and UV exposure. Its tool-free design allows for quick installation, removal, and interchangeable looks. Ideal for off-road use, on-road compliance in areas requiring covered auxiliary lights, or simply giving your vehicle a custom appearance.

• Transparent Amber PRO color improves visibility in haze, dust, and fog
• Polycarbonate plastic construction guards the lens from impact and abrasion
• Snaps securely onto the light housing—no tools needed
• Compatible with 10-inch Rigid Industries E/RDS Series LED lights
• Perfect for areas that mandate covered accessory lights

This yellow Rigid Industries light cover snaps directly onto 10" E-Series LED light bars and can be trimmed to fit 4" and 6" E-Series lights.

Molded from durable polycarbonate plastic, the cover shields your light bar from road debris, branches, and other hazards while adding a custom color accent. It installs in seconds with a tool-free snap-on design and removes just as easily.

Key Features:

• Fits 10" Rigid E-Series light bars; trims to 4" and 6" E-Series lights
• Yellow translucent finish for a distinct look
• Durable polycarbonate construction
• Snaps on and off without tools
• Extra layer of protection against scratches and chips
• Combine multiple covers for longer bars: 2 for 20", 3 for 30", 4 for 40", 5 for 50" (also compatible with Adapt E-Series, RDS-Series, Radiance Plus, and Radiance Plus Curved light bars)

Whether you need a color accent for off-road style or want to protect your light bar when covers are required on public roads, this trim-to-fit yellow cover delivers.

The Rigid Industries E-Series PRO 10-inch LED light bar delivers a Spot/Flood combo beam pattern, combining a focused long-range spot with a wide flood for versatile illumination. This dual-row light bar features upgraded LED technology that produces up to 111% more raw lumens than previous E-Series models.

Built for durability, the E-Series PRO uses a high-grade aluminum alloy housing, impact-resistant polycarbonate lens, and a UV-resistant powder coat finish. An integrated thermal management system and waterproof connector ensure reliable performance in harsh conditions. The refined design includes blacked-out circuit boards and prominent Rigid branding.

• Spot/Flood combo beam pattern
• High-grade aluminum alloy housing
• Impact-resistant polycarbonate lens
• Durable UV-resistant powder coat finish
• Integrated thermal management system
• Waterproof connector (exclusions apply)
• IP68-rated dust and water ingress protection
• SAE J575 compliant for shock and vibration
• Over/under voltage protection
• Reverse polarity protection
• RFI/EMI protection
• RoHS compliant
• Operating voltage: 9-36V DC
• 50,000+ hour lifespan
• Includes installation instructions

Designed for off-road but equally at home in powersports, marine, and general automotive applications, the RIGID E-Series 10-inch Spot light bar with Amber PRO lens provides superior visibility in dusty, smoky, and low-contrast environments. Amber lighting reduces glare and enhances definition, helping you see farther than traditional white light in adverse conditions.

• IP68 compliant – dust-tight and protected against water immersion
• Over/under voltage protection
• Reverse polarity protection
• Alloy housing and integrated heatsink for thermal management
• Pressure equalizing vent prevents moisture buildup
• 50,000-hour LED lifespan
• Wide 9-36 VDC operating range
• Patented optics for precise beam pattern
• Amber PRO lens included
• Backed by a limited lifetime warranty

RIGID Industries MPN: 110223.

The Rigid Industries 10-inch E-Series Spot light bar in Midnight Edition delivers high-output illumination with a stealthy all-black appearance. Combining Rigid's patented spot optic with a translucent black enamel coating and black-oxide hardware, this light bar blends in by day and projects a focused long-range beam at night. Its rugged construction includes a high-grade aluminum alloy housing, impact-resistant polycarbonate lens, and UV-resistant powder coat, backed by integrated thermal management and comprehensive circuit protection for reliable operation from 9-36V DC.

• Exclusive Midnight Edition: translucent black enamel on patented hybrid spot optics
• Special black polymer-coated circuit board for a refined look
• High-grade aluminum alloy housing with durable UV-resistant powder coat
• Impact-resistant polycarbonate lens
• Integrated thermal management system
• Over/under voltage protection and reverse polarity protection
• RFI/EMI protection
• 9-36V DC operating range
• 50,000+ hour LED lifespan
• All-black assembly hardware

Rigid Industries part number 110213BLK. Ideal for off-road, powersports, marine, automotive, and first responder applications.

Built for demanding off-road, marine, and powersports applications, the Rigid Industries 10-inch E-Series PRO Spot LED light bar delivers a high-intensity, long-range beam. Recent LED advancements provide up to 111% more raw lumens, while the spot optic focuses light into a tight pencil beam for exceptional down-range visibility.

The light bar features a rugged aluminum housing with a UV-resistant black powder coat and an impact-resistant polycarbonate lens. Integrated thermal management, waterproof DT connectors (exclusions apply), and sealed electronics meet IP68 standards for dust and water ingress. Advanced circuitry includes reverse polarity, over/under voltage, and RFI/EMI protection, ensuring reliable operation from 9–36V DC.

• Beam pattern: Spot
• Length: 10 inches
• IP68 dust/water ingress protection
• SAE J575 shock and vibration compliant
• Built-in reverse polarity and over/under voltage protection
• RFI/EMI shielding
• RoHS compliant
• 50,000+ hour LED lifespan
• Operates on 9–36V DC systems

The Rigid Industries 10-inch E-Series LED light bar pairs a compact double-row design with flood beam optics for broad, even illumination. Upgraded LEDs deliver up to 111 percent more raw lumens than previous E-Series models, while the heavy-duty aluminum housing and impact-resistant polycarbonate lens are built for demanding off-road, marine, and powersports environments.

Key features:

• Flood beam pattern – wide horizontal spread for area lighting and work scenes
• Up to 111% more raw lumens (enhanced E-Series PRO LED technology)
• Integrated thermal management system
• Impact-resistant polycarbonate lens
• High-grade aluminum alloy housing with UV-resistant powder coat
• IP68 rated – dust-tight and protected against water immersion
• SAE J575 compliant – shock and vibration resistance
• RFI/EMI protection and reverse polarity protection
• Over/under voltage protection (9–36V DC input)
• RoHS compliant, 50,000+ hour LED lifespan
• Waterproof connector (exclusions apply)

This snap-on light cover is designed for Rigid Industries 10-inch Adapt LED light bars. Constructed from impact-resistant polycarbonate, it provides a durable shield for your light's lens against rocks, road debris, and weather. The transparent Amber PRO tint improves contrast in dusty, smoky, or foggy conditions, making it a practical choice for off-road use.

Key features:

• Transparent Amber PRO color enhances visibility in low-visibility environments
• Durable polycarbonate construction protects the light lens from damage
• Snap-on design allows quick, tool-free installation and removal
• Fits Rigid Industries 10-inch Adapt LED light bars
• Helps comply with regulations requiring covered auxiliary lights in certain areas

The Rigid Industries Adapt Lens Cover provides a snap-on protective layer for your 10-inch Adapt LED light bar. Crafted from impact-resistant polycarbonate, this yellow cover shields the factory lens from rocks, branches, and road debris while delivering a distinct custom look. It installs and removes in seconds with no tools required, making it a practical addition for occasional off-road use or when driving in areas that mandate covered auxiliary lighting.

• Yellow tinted polycarbonate construction for durability and style
• Snap-on design – installs or removes without hardware in seconds
• Protects the light’s primary lens from impact, scratches, and UV exposure
• Useful in jurisdictions requiring lens covers on off-road lighting
• Compatible with Rigid Adapt 10-inch LED lights (cover only, light sold separately)

Protect the lens on your Rigid Industries 10-inch light bar with this black polycarbonate cover from the Adapt series. The snap-on design allows tool-free installation and removal, while the durable construction shields against rocks, trail debris and road spray. When local regulations require accessory light covers, this cover provides a clean, functional solution.

• Snaps securely onto compatible Rigid Industries 10-inch lights
• Made from impact-resistant polycarbonate plastic
• Easy to install and remove – no tools needed
• Sold individually (other colors available: clear, amber, smoked)
• Rigid Industries part number 11001