The Rigid Industries 360-Series 4-inch round LED spot beam lights (pair) produce a focused, long-range pattern ideal for off-road driving visibility. Each housing combines a high-grade aluminum alloy construction with optimized forward-projecting optics and a pressure-equalizing vent to resist moisture and condensation. An integrated RGBW backlight adds customizable styling, offering eight independently controlled color options via a dedicated circuit.

• Output: up to 8,600 raw lumens
• Beam pattern: Spot beam for maximum distance
• Backlight: RGBW with 8 color choices — red, green, blue, light blue, purple, amber, white, demo mode
• Independently controlled backlight with dedicated wire
• Housing: High-grade aluminum alloy with heat sink
• Optics: Patented reflector design for optimized forward projection
• PCB: Black exposed printed circuit board
• Vent: Pressure-equalizing vent
• Lifespan: 50,000-hour LED life
• Operating voltage: 9–36 VDC
• Installation: Flying leads for universal connection; off-road use only
• Warranty: Limited lifetime warranty

Package includes two 4-inch lights and installation instructions.

Pair of 4-inch round LED off-road lights from the 360-Series, delivering a focused drive beam pattern with independently controlled RGBW backlighting. Projects up to 8,600 raw lumens through patented optics, housed in a high-grade aluminum alloy body with integrated heatsink and pressure-equalizing vent. Flying leads enable universal installation on vehicles or equipment operating on 9-36V DC. The black exposed circuit board is purpose-built for demanding off-road use.

• 8,600 raw lumens, drive beam pattern
• RGBW backlight – 8 selectable colors: red, green, blue, light blue, purple, amber, white, and demo mode
• Backlighting independently controlled; dedicated wire for backlight operation without primary LEDs
• Aluminum alloy housing with heatsink and pressure-equalizing vent
• Patented forward-projecting optics
• 50,000-hour LED lifespan
• 9-36V DC operating voltage
• Universal installation with flying leads
• Off-road use only
• Limited lifetime warranty
• Includes two lights

The Rigid Industries 360-Series 4-inch round LED off-road light delivers a smooth diffused beam pattern with a fully controllable RGBW backlight. Built around a high-grade aluminum alloy housing and heat sink, this pair of lights puts out up to 8,600 raw lumens while maintaining reliable thermal management through a pressure-equalizing vent and a 50,000-hour LED lifespan.

Each light features a black exposed circuit board and patented forward-projecting optics. The independent backlight circuit lets you switch between eight colors—red, green, blue, light blue, purple, amber, white, and a demo mode—without powering the primary LEDs. Universal flying leads allow for custom installation, and the integrated driver handles 9–36 VDC input.

• 4-inch round housing with diffused lens
• RGBW backlight – 8 selectable colors plus demo mode
• Up to 8,600 raw lumens per pair
• Patented optics for optimized diffused beam
• High-grade aluminum alloy housing and heat sink
• Pressure equalizing vent resists moisture and fogging
• 9–36 VDC operating range
• 50,000-hour LED lifespan
• Limited lifetime warranty
• Off-road use only
• Includes two lights and universal flying leads

Protect your Rigid 360-Series 4-inch LED light with these black polycarbonate covers. They snap directly onto the light housing, providing an extra layer of defense against debris and road hazards while meeting legal requirements in areas that mandate accessory light covers.

Made from durable polycarbonate plastic, the covers shield the lens without tools—simply snap on for protection and remove when full light output is needed. Each kit includes two covers and features prominent RIGID branding. Also available in yellow, clear, and smoke.

• Fits Rigid 360-Series 4-inch LED lights
• Durable polycarbonate construction
• Tool-free snap-on, snap-off installation
• Shields lens from rocks, road debris, and UV exposure
• Prominent RIGID branding
• Pair (2 covers)
• Black finish

Protect your Rigid 360-Series LED light lenses and add a custom look with these yellow snap-on covers. Molded from durable polycarbonate, they shield against rock strikes, road debris, and UV exposure while allowing the light's output to pass through with a yellow tint.

Designed specifically for the 4-inch Rigid 360-Series round lights, these covers snap securely into place and can be removed or swapped in seconds—no tools required. This pair includes two covers, so you can outfit a single light or a pair.

• Fits Rigid 360-Series 4-inch round LED lights
• Yellow tinted polycarbonate construction
• Snap-on design for quick installation and removal
• Provides additional lens protection from impacts and abrasion
• Includes 2 light covers
• Features prominent RIGID branding

These Rigid Industries 360-Series light covers are purpose-built to shield the lens of your 6-inch LED light. Molded from durable polycarbonate plastic, they provide an extra layer of protection against rock strikes, trail debris, and daily hazards without sacrificing style. The black finish offers a clean, understated look while maintaining your light's output.

Key Details:

• Fits Rigid 360-Series 6-inch LED lights
• Snap-on design for fast installation and removal
• Durable polycarbonate construction
• Prominent RIGID branding embossed on the cover
• Ideal for areas requiring accessory light covers
• Sold as a pair (2 covers)
• Manufacturer Part Number: 363665

Rigid Industries light covers add both style and protection to your 360-Series LED lights. Molded from durable polycarbonate, these snap-on covers shield the lens from debris, while the transparent Amber PRO tint helps cut through dust, smoke, and low-visibility conditions. They are ideal for areas that require accessory light covers, allowing quick on/off changes without tools. Sold as a pair for one 6-inch light.

• Transparent Amber PRO color enhances visibility in adverse weather
• Polycarbonate plastic construction adds an extra layer of lens protection
• Easy snap-on, snap-off design for fast installation or removal
• Compatible with Rigid Industries 360-Series 6-inch LED lights
• Perfect for regions with mandatory light cover regulations

These Rigid Industries light covers are crafted from durable polycarbonate plastic, offering an extra layer of protection for the lens of your 360-Series 6-inch LED light. The yellow finish not only guards against debris and UV exposure but also provides a distinctive appearance. Covers snap on and off in seconds for quick changes or legal compliance in areas requiring covered auxiliary lights.

• Fits Rigid Industries 360-Series 6-inch LED lights
• Sold as a pair (two covers included)
• Made from impact-resistant polycarbonate plastic
• Snap-on/snap-off installation — no tools required
• Yellow translucent tint for a custom look
• Prominent Rigid branding molded into the cover
• Also available in clear, smoke, and black (sold separately)

Fits 2014-2023 Toyota 4Runner, Tacoma, and Tundra models. This Rigid Industries 360-Series fog light kit replaces your factory fog lights with a pair of SAE J583-compliant, 4-inch round LED lights that produce up to 3,100 raw lumens. The optimized beam pattern provides focused illumination for adverse weather, while the black anodized aluminum housing and blacked-out circuit board deliver a clean, durable appearance.

Key Features:

• SAE J583 certified for street-legal fog light use
• 4-inch round LED lights with up to 3,100 raw lumens
• Optimized beam pattern for wide, low-glare illumination
• Aluminum housing with black anodized finish
• UV-resistant black powder-coated steel mounting brackets
• Injection-molded polycarbonate lens
• Uses OEM mounting points and hardware for seamless fitment
• Fully adjustable aim
• Available in white or selective yellow output (select at purchase)
• Includes a pair of 360-Series fog lights and all necessary installation hardware
• Backed by Rigid's limited lifetime warranty

Note: 360-Series light covers are not compatible with this fog light kit. Professional installation recommended. Rigid part number 36364.

Designed exclusively for Rigid Industries 360-Series SAE street-legal LED fog lights, this 2-wire harness provides a complete plug-and-play 12V connection for a single pair of lights.

• 12-foot (3.66 m) length with flying leads for custom routing and universal fitment
• Pre-terminated battery ring terminal connector
• 2-position on/off rocker switch
• Inline ATO/ATC fuse holder with 15-amp fuse installed
• For SAE-compliant fog lights only—not compatible with other 360-Series beam patterns

This Rigid Industries 360-Series 3-wire harness provides a complete 12V wiring solution for one pair of 4-inch or 6-inch 360-Series round LED lights with backlight functionality. The 10-foot (3-meter) lead uses flying leads for universal installation, terminating in battery terminal connectors. A 3-position switch allows you to toggle between on, off, and backlight-only operation. The kit includes a 20-amp fuse and a 60-amp 14V DC relay, all pre-wired to save setup time.

Designed exclusively for backlight-equipped 360-Series lights; not compatible with SAE versions.

• Connects one pair of Rigid 360-Series 4” or 6” round LEDs
• 10 ft (3 m) harness length with flying leads for universal fitment
• 3-position switch: on, off, backlight-only
• 20-amp fuse and 60-amp 14V DC relay included
• Battery terminal connectors for direct 12V connection
• Backlight-specific circuit; do not use with SAE lights

The Rigid Industries 360 Connect 50-inch light bar assembly delivers versatile off-road lighting with a modular pod design and dynamic RGBW backlighting. This preassembled bar combines multiple LED pods to provide a blend of long-range Drive and wide-coverage Spot beam patterns, ideal for trails, dunes, and after-dark driving. The adjustable curve allows you to fine-tune the bar’s geometry to your vehicle’s mounting surface, while the RGBW backlight adds customizable accent lighting in a range of colors. Rigid part number 36310.

• Drive and Spot optics
• Adjustable curve
• RGBW backlighting
• Preassembled 50″ bar – modular pod design

The 40-inch Rigid Industries 360-Series Connect light bar delivers a modular, preassembled off-road lighting solution with combined Drive and Spot optics—long-range punch paired with broad, immediate coverage. The dynamic RGBW backlighting lets you customize color to match your vehicle or mood, while the integrated adjustable curve makes aiming straightforward after mounting.

• Preassembled 40-inch pod bar simplifies installation
• Drive & Spot optic combination – 24,480 raw lumens
• Adjustable mounting curve for precise beam angle
• RGBW backlighting with customizable color options
• Modular design fits a wide range of vehicles and mounting positions
• Rigid Industries part number: 36308

The Rigid Industries 360-Series Laser Edition 6-inch pod light delivers extreme long-range illumination for high-speed off-road driving. It combines a patented Hybrid Optic system with Osram LEDs and a Kyocera SMD 1000 laser diode to produce over 1 million candela of peak beam intensity and 4,200 raw lumens. The result is a focused, distance-oriented beam pattern that prevents outdriving your lights at speed. The robust aluminum alloy housing features the iconic 6-inch 360-Series form factor and an amber backlight for a distinctive look.

• Peak beam intensity: over 1,000,000 candela
• Raw output: 4,200 lumens
• Patented Hybrid Optic design (reflector + focusing lens)
• Osram LED emitters paired with a Kyocera SMD 1000 laser diode
• Amber backlight (Amber PRO option)
• 6-inch 360-Series housing, aluminum alloy construction
• Developed and tested for off-road racing use
• Also available in standard white light version

Part number: 36211

This pair of Rigid Industries 360-Series 6-inch SAE fog lights combines an Amber PRO Lens with a spot optic to deliver up to 8,600 raw lumens of selective-yellow light. The amber output enhances contrast and cuts through dust, smoke, and other low-visibility conditions, while an independently switchable amber backlight adds a customisable accent.

• Spot optic projects up to 8,600 raw lumens
• Amber PRO Lens for superior performance in adverse conditions
• Independently togglable amber backlight — flying leads included for universal wiring
• IP68 dust-tight and waterproof
• Alloy housing with integrated heatsink and blacked-out circuit board
• 9–36 VDC operation with over/under voltage and reverse polarity protection
• Pressure equalizing vent prevents internal condensation
• 50,000-hour LED lifespan
• Patented optics — off-road use only
• Wiring harness sold separately
• Backed by Rigid’s limited lifetime warranty

This pair of Rigid Industries 360-Series 4-inch LED fog lights features amber PRO lenses and a spot beam pattern, producing up to 3,060 raw lumens for superior visibility in dust, smoke, and low-contrast conditions. The amber output reduces glare, enhances definition, and improves contrast compared to traditional white light. An independently togglable amber backlight adds a distinctive accent.

Key Features:

• 4-inch round LED fog lights (pair) with spot optic and amber PRO lens
• 3,060 raw lumens
• 9-36V DC operation
• IP68 compliant – dust-tight and waterproof
• Pressure equalizing vent
• Over/under voltage protection and reverse polarity protection
• Blacked-out circuit board with prominent RIGID branding
• Alloy housing and integrated heatsink
• 50,000-hour LED lifespan
• Flying leads for universal installation; independently togglable amber backlight
• Patented optics – for off-road use only
• Wiring harness sold separately
• Backed by Rigid's limited lifetime warranty

These lights deliver robust, long-lasting performance in harsh environments. Note: Wiring harness is not included.

Rigid Industries 360-Series SAE fog lights are built for dust, fog, and other low-visibility conditions, with the added versatility of switchable Selective Yellow and White output. The SAE J583 compliance means they're legal for on-road use, while their durable construction handles off-road punishment.

• Toggle between Selective Yellow and White lighting for optimal visibility
• SAE J583 compliant – street legal fog light
• High-grade alloy housing and heatsink
• Integrated thermal management system
• Impact-resistant polycarbonate lens
• IP68 rated – dust-tight and protected against water ingress
• 9–36 VDC operation with over/under voltage and reverse polarity protection
• Pressure equalizing vent combats condensation
• Limited lifetime warranty

Note: Wiring harness sold separately.

Rigid Industries 360-Series 4-inch Selective Yellow LED fog lights are engineered for dust, fog, rain, and snow. The Selective Yellow output leverages the human eye's natural sensitivity to longer wavelengths, reducing glare and improving contrast compared to white or amber light, so you see farther in low-visibility conditions.

Each light features a high-grade alloy housing with integrated heatsink, an IP68 dust/waterproof rating, and a pressure-equalizing vent to combat condensation. Over/under-voltage and reverse polarity protection are built in for reliable 9–36V DC operation. SAE J583 compliance means these lights are street legal as fog lights.

Highlights

• Selective Yellow LED output optimized for fog, dust, snow, and rain
• SAE J583 compliant – legal for on-road use as a fog light
• IP68 rated – fully sealed against dust and water immersion
• 9–36V DC operating range
• High-grade alloy housing and heatsink
• Pressure equalizing vent prevents moisture buildup
• Over/under-voltage and reverse polarity protection
• Removable bezel and side fairings for OEM-style installation
• Flying leads for universal wiring
• Long-life LED rated for up to 50,000 hours
• Limited lifetime warranty
• Wiring harness sold separately

Sold as a pair (two lights). Backed by Rigid’s limited lifetime warranty.

These Rigid Industries 360-Series 4-inch LED fog lights are SAE J583 compliant, making them legal for on-road use in low-visibility conditions like fog and dust. They produce a long-range, high-intensity beam while drawing minimal power and delivering up to 50,000 hours of useful life.

The lights feature a high-grade alloy housing with integrated heatsink and a pressure-equalizing vent. A removable white bezel and side fairings allow color matching for OEM appearances, and flying leads enable universal installation.

• SAE J583 compliant for street-legal fog light use
• IP68 rated – dust-tight and protected against continuous water immersion
• 9-36V DC operation with over/under voltage and reverse polarity protection
• 50,000-hour lifespan
• High-grade alloy housing and heatsink
• Removable white bezel and side fairings (can be painted to match)
• Flying leads for universal wiring
• Pressure equalizing vent
• Limited lifetime warranty
• Wiring harness sold separately

Part number: 36120.

The Rigid Radiance+ Curved 40-inch RGBW Light Bar combines advanced Spot Drive optics with a fully independent RGBW backlight system, giving you powerful forward illumination and eight selectable accent colors to match your vehicle's style.

• 8 backlight modes: red, green, blue, light blue, purple, amber, white, and demo mode
• Backlight independently controlled via switch logic
• Optimized Spot Drive optics blend spot and drive beam patterns
• High-grade aluminum alloy housing with durable black powder coat finish
• High-impact polycarbonate lens
• IP68 rated — dust-tight and protected against water immersion
• Integrated over/under voltage protection
• Pressure equalizing vent prevents moisture buildup
• Black exposed printed circuit board
• Operates on 9-15V DC electrical systems
• Compatible with all Rigid RDS-Series light covers and mounts
• 10-year limited warranty
• RoHS compliant

Rigid part number 340053.

The Rigid Industries Radiance+ Curved 30-Inch RGBW Light Bar combines robust off-road performance with a color-changing backlight, giving you eight selectable colors—red, green, blue, light blue, purple, amber, white, or a scrolling demo mode. The backlight operates independently from the main beam via switch logic, so you can toggle colors without a dedicated controller. The main optics use Rigid’s Spot Drive technology, blending a spot and driving beam pattern into a single array of forward-projecting LEDs for broad, long-distance visibility. Built around a high-grade aluminum alloy housing and heat sink like the proven RDS-Series, this bar also accepts all RDS-series light covers and mounts.

• 30-inch curved form factor
• Eight RGBW backlight colors plus demo mode, independently controlled by switch
• High-grade aluminum alloy housing with black powder coat finish and integrated heat sink
• Spot Drive optics for combined spot/driving beam pattern
• Black exposed printed circuit board
• IP68 rated—dust-tight and protected against continuous water immersion
• High-impact polycarbonate lens
• Over/under voltage protection
• Pressure equalizing vent
• 9–15 V DC operating voltage
• Fits all Rigid RDS-Series light covers and mounts
• RoHS compliant
• Backed by Rigid Industries’ 10-year warranty
• Rigid Industries part number: 330053

Rigid Industries D-XL PRO Specter Diffused LED pods deliver intense, efficient lighting in a compact 4x4-inch housing. This set includes two pods, each equipped with a diffused lens that spreads light evenly across the trail, job site, or rescue scene. Built with unbreakable polycarbonate lenses, UV-resistant polyester powder coating, and high-grade aluminum alloy, the D-XL PRO is engineered for harsh environments and sustained performance.

Key specifications:

• Beam pattern: Specter Diffused
• Housing size: 4 x 4 inches
• Lens material: Impact-resistant polycarbonate
• Finish: UV-resistant polyester powder coat
• Hardware: Stainless steel with vibration isolator
• Water/dust ingress protection: IP68 compliant
• Shock/vibration compliance: SAE J575
• Voltage range: 9-36 V DC
• Protection circuits: Over/under voltage, reverse polarity, RFI/EMI
• Thermal management: Integrated system
• Lifespan: 50,000+ hours
• Compliance: RoHS compliant
• Connector: Waterproof (exclusions apply)

Each light is backed by Rigid Industries' commitment to durability and includes advanced electronics for consistent output in a variety of operating voltages. The Specter Diffused optics provide a smooth, wide beam ideal for area illumination without harsh hotspots.

The Rigid Industries D2 XL Drive LED pod pair delivers exceptional output in a compact 4x4-inch housing. Part of the D-XL PRO series, each light features a driving beam pattern optimized for high-speed visibility and an integrated thermal management system that keeps output consistent.

Built with an impact-resistant polycarbonate lens, UV-stabilized powder coat, and stainless steel hardware, these pods meet SAE J575 shock/vibration standards and carry an IP68 dust and water ingress rating. Internal electronics include over/under voltage and reverse polarity protection for safe operation on 9-36V DC systems.

• Waterproof connector (exclusions apply)
• Integrated thermal management system
• SAE J575 compliant – shock and vibration
• Impact-resistant polycarbonate lens
• IP68 compliant – dust and water ingress
• Durable UV-resistant powder coat
• Over/under voltage protection
• Reverse polarity protection
• High-grade aluminum alloy housing
• 50,000+ hour lifespan
• RFI/EMI protection
• RoHS compliant
• 9-36 V DC operating range

Each set includes two D2 XL Drive LED pod lights.

The Rigid Industries D2 XL Hyperspot LED lights step up from the original D-Series with a larger 4x4-inch footprint and up to 170% more raw lumens, all while maintaining the efficiency Rigid is known for. Sold as a set of two, these pod lights combine extreme intensity with rugged construction for demanding off-road, powersports, agricultural, and industrial use.

• Up to 170% more raw lumens vs. previous D-Series
• Hyperspot beam pattern for maximum distance
• Impact-resistant polycarbonate lens
• UV-resistant polyester powder coat finish
• High-grade aluminum alloy housing
• Stainless steel hardware and vibration isolator
• Integrated thermal management system
• IP68 rated – dust-tight and protected against water immersion
• SAE J575 compliant for shock and vibration
• Over/under voltage protection
• Reverse polarity protection
• 9-36V DC input with waterproof connector (exclusions apply)
• RFI/EMI protection
• RoHS compliant
• 50,000+ hour LED lifespan
• Blacked-out circuit boards and updated RIGID branding

Rigid Industries Dually XL LED light pods deliver powerful hybrid illumination that fuses a broad diffused flood beam with a penetrating spot pattern—ideal for off-road, powersports, and work trucks where both situational awareness and long-distance reach are critical. This set includes two lights, each built around an impact-resistant polycarbonate lens, a vibration-isolating mount, and a rugged aluminum housing finished in UV-resistant polyester powder coat for long-term corrosion resistance.

Engineered to handle extremes, the Dually XL is IP68-rated for dust and water submersion, SAE J575 compliant for shock and vibration, and operates on a wide 9–36V DC input with integrated over/under voltage and reverse polarity protection. An integrated thermal management system keeps output consistent during extended use, while the waterproof connector and stainless steel hardware ensure reliable connections in harsh environments.

• Waterproof Connector (Exclusions Apply)
• Integrated Thermal Management System
• SAE J575 Compliant - Shock/Vibration
• Impact Resistant Polycarbonate Lens
• IP68 Compliant - Dust/Water Ingress
• Durable UV Resistant Powder Coat
• Over/Under Voltage Protection
• Reverse Polarity Protection
• High-Grade Aluminum Alloy
• RFI/EMI Protection
• RoHS Compliant
• 9-36 V DC

Sold as a matched pair.

Rigid Industries Dually XL Spot LED pod lights (set of two) deliver focused spot beam illumination in a rugged 4x4-inch package. Building on the popular D-Series, the Dually XL produces up to 170% more raw lumens while maintaining the same efficient thermal management. The updated design features prominent Rigid branding and blacked-out circuit boards for a clean look.

Each light is built with an IP68 dust- and waterproof rating, SAE J575 shock/vibration compliance, and a durable UV-resistant powder coat. An integrated thermal management system, reverse polarity protection, and over/under voltage protection ensure long service life. The unbreakable polycarbonate lens and high-grade aluminum alloy housing stand up to harsh environments, while an included vibration isolator and stainless steel hardware provide a secure mount.

• Set of two Dually XL Spot LED pods
• 4 x 4 inch housing
• Spot beam pattern
• Up to 170% more lumens than earlier D-Series models
• IP68 dust/water ingress protection
• SAE J575 compliant for shock and vibration
• Impact-resistant polycarbonate lens
• UV-resistant polyester powder coat finish
• High-grade aluminum alloy construction
• Stainless steel hardware and vibration isolator included
• Integrated thermal management system
• Reverse polarity protection
• Over/under voltage protection (9-36V DC)
• 50,000+ hour lifespan
• RFI/EMI protection
• RoHS compliant

The Rigid Industries Dually XL LED light pod (set of two) delivers a substantial upgrade over the original D-Series, packing up to 170% more raw lumens in a compact 4x4-inch housing. The flood beam pattern spreads light wide for trail riding, scene lighting, and work applications, while advanced LED technology maintains the efficiency Rigid is known for.

Built to withstand extreme environments, the Dually XL features a virtually unbreakable polycarbonate lens, a durable UV-resistant powder-coated aluminum housing, and stainless steel hardware. A vibration isolator protects the internals, and every unit undergoes rigorous testing to meet SAE J575 shock and vibration standards.

• Set of 2 flood beam LED pods
• Up to 170% more lumens than previous D-Series models
• 4x4-inch high-grade aluminum alloy housing
• Impact-resistant polycarbonate lens
• IP68-rated dust and water ingress protection
• 9-36V DC operating range with over/under voltage and reverse polarity protection
• Integrated thermal management system
• RFI/EMI protection; RoHS compliant
• Waterproof connector (exclusions apply)
• 50,000+ hour LED lifespan
• Stainless steel hardware and vibration isolator
• Recent updates include prominent Rigid branding and blacked-out circuit boards

The Rigid Industries Radiance+ RGBW Pod XL pair delivers powerful off-road lighting with customizable RGBW backlighting, separate from the main beam. These pod lights share the rugged form factor of the D-XL PRO series and add a multicolor backlight that lets you switch between eight static colors or a demo cycle via a dedicated switch.

• Eight backlight colors: red, green, blue, light blue, purple, amber, white, and demo mode
• Independent backlight control using switch logic — no additional controllers needed
• High-grade aluminum alloy housing with integrated heatsink for thermal management
• Durable black powder coat finish
• High-impact polycarbonate lens resists cracking and damage
• IP68 dust- and water-ingress protection for all-weather use
• Pressure equalizing vent prevents moisture buildup
• Over/under voltage protection
• Compatible with all D-XL series light covers and mounts for easy integration
• Operates on 9–15V DC electrical systems
• RoHS compliant
• Backed by a 10-year warranty
• Includes two pod lights

Manufacturer part number: 322053

The Rigid Industries Amber PRO Light Cover is a direct-fit snap-on accessory for D-XL Series LED lighting pods. Molded from impact-resistant polycarbonate, it adds a durable shield over the light lens, guarding against rock chips, road debris, and trail scratches. The transparent Amber PRO tint cuts through dust, smoke, and fog, improving contrast and reducing glare in low-visibility conditions. Swapping covers takes seconds—just snap on or off without tools—making it easy to switch between clear output and amber on demand. These covers also meet legal requirements in many states where auxiliary lighting must be covered while on-road.

• Fits Rigid Industries D-XL Series LED Lights
• Amber PRO transparent tint enhances visibility in dust, smoke, and fog
• Polycarbonate construction for impact and scratch resistance
• Snap-on, snap-off design—no tools required
• Provides essential lens protection from trail and road debris

Protect your Rigid Industries D-XL Series or Radiance XL light with this snap-on polycarbonate cover. Designed to fit directly over the lens, the yellow finish adds a custom look while shielding against rock chips, dirt, and minor trail damage.

• Compatible with Rigid Industries D-XL Series and Radiance XL light pods
• Durable polycarbonate construction resists cracking, fading, and impact
• Tool-free snap-on installation—quick to fit or remove for cleaning
• Yellow tint provides a styled appearance and an extra layer of protection