Fits select 2003-2018 Audi Q7, Porsche Cayenne, and Volkswagen Touareg (3.2L / 4.2L) equipped with 18-inch wheels.

This SHW Smooth MB brake rotor is a precision-engineered replacement for the right front position. Engineered to exceed factory thermal requirements, this rotor provides up to 50% better cooling compared to standard vented rotors. This significant improvement in heat dissipation helps prevent brake fade and ensures consistent pedal feel during aggressive driving or heavy load conditions.

• Direct replacement for right front factory rotor
• Smooth MB finish ensures consistent friction and pad engagement
• Advanced design provides up to 50% improved cooling efficiency
• Specifically compatible with vehicles equipped with 18-inch wheels
• Manufacturer Part Number: VFR37814
• Interchange Part Number: 7L8615302

This SHW Smooth MB Series brake rotor is a precision-engineered replacement for the right front position on select 2003-2017 Porsche Cayenne and Volkswagen Touareg models (3.2L / 4.2L) equipped with 330mm braking systems. Designed for drivers who demand consistent stopping power, this rotor replaces worn OE components with a focus on thermal stability and longevity.

Featuring an advanced monoblock design, this rotor provides up to 50% better cooling efficiency compared to standard alternatives. The optimized internal vane structure helps dissipate heat rapidly, effectively preventing brake fade during heavy towing, mountain descents, or spirited driving. The smooth surface finish ensures maximum pad-to-rotor contact for a consistent, reliable pedal feel.

• Position: Right Front
• Diameter: 330mm
• Surface Style: Smooth
• Series: Smooth MB
• Manufacturer Part Number: VFR37812
• Interchange Part Number: 7L6615302P
• Construction: High-performance monoblock design for superior heat dissipation

Fits select 2011-2015 Volkswagen Touareg models (3.0L) including Hybrid, TDI, V6, and VR6 trims equipped with 360mm front rotors.

Restore factory-level braking performance with this SHW Smooth MB Brake Rotor. Designed for the left front position, this rotor is a precision-engineered replacement for worn original equipment. It features a smooth friction surface to provide consistent pad contact and reliable stopping power for daily driving without the noise or accelerated wear associated with more aggressive rotor patterns.

Built to meet exacting tolerances, this SHW rotor ensures a proper fit and balanced rotation to eliminate pedal pulsation. The 360mm diameter and casting design optimize heat dissipation, maintaining braking integrity under various load conditions.

• Position: Left Front
• Rotor Style: Smooth MB
• Diameter: 360mm
• Direct replacement for OEM 7P6615301B
• Manufacturer Part Number: VFL37831

Fits select 2003-2017 Porsche Cayenne and Volkswagen Touareg (3.2L / 4.2L).

This SHW Smooth MB brake rotor is a direct-fit replacement for the left front position, engineered to provide consistent stopping power and superior thermal management. Built to match OE specifications for 330mm braking systems, this rotor utilizes advanced metallurgy to offer up to 50% better cooling capacity than standard designs, effectively preventing brake fade during high-demand driving or heavy-duty use.

• Manufacturer Part Number: VFL37811
• Interchange Part Number: 7L6615301P
• Position: Left Front
• Rotor Diameter: 330mm
• Series: Smooth MB
• Surface Type: Smooth
• Engine Compatibility: 3.2L / 4.2L

Fits select 2006-2014 Mercedes-Benz CL63 AMG, CL65 AMG, S63 AMG, and S65 AMG (Base).

This SHW Rear Dimpled Lightweight Brake Rotor is engineered to meet the high thermal and mechanical demands of AMG performance luxury coupes and sedans. Utilizing a lightweight construction, this rotor reduces unsprung weight for improved suspension response and handling dynamics. The dimpled friction surface facilitates gas venting and heat dissipation without the structural risks associated with through-drilled rotors, maintaining consistent pedal feel during spirited driving.

• Precision engineered for rear-axle fitment on CL and S-Class AMG models
• Dimpled surface provides superior degassing and heat management
• Lightweight design reduces rotational mass for enhanced performance
• Direct replacement for OE-style brake rotors
• Manufacturer Part Number: TRX42212
• Replaces Reference Number: 2214230812-28

Fits 2006-2014 Mercedes-Benz CL63, CL65, S63, and S65 AMG models.

This SHW Performance front dimpled lightweight brake rotor is a precision-engineered upgrade for high-performance Mercedes-Benz braking systems. Designed to replace the factory unit, this rotor utilizes a specialized dimpled surface to effectively dissipate heat and vent gasses without the structural vulnerability sometimes found in fully cross-drilled rotors. The lightweight design helps reduce unsprung mass, contributing to more responsive handling and improved suspension dynamics under demanding driving conditions.

• Manufacturer Part Number: TFX42311
• Reference/OE Number: 2214211312-64
• Position: Front
• Rotor Type: Dimpled, Lightweight
• Finish: Cast and machined

Authorized Vehicle Fitment:

• 2008-2014 Mercedes-Benz CL63 AMG Base
• 2008-2014 Mercedes-Benz CL65 AMG Base
• 2008-2013 Mercedes-Benz S63 AMG Base
• 2006-2013 Mercedes-Benz S65 AMG Base

Fits select 1998-2002 Mercedes-Benz C43 AMG, CLK55 AMG, and E55 AMG (4.3L).

This SHW right front brake rotor (MPN: TFR42104) is a direct replacement for the original equipment, designed to restore factory-level braking performance while managing heat and weight. Featuring a smooth surface finish for consistent pad contact and linear braking response, this lightweight rotor reduces unsprung mass at the wheel hub to improve suspension reaction and handling. Manufactured to precise tolerances, it bolts directly to the factory right-front mounting points without modification.

• Position: Front Right (Passenger Side)
• Brake Surface: Smooth
• Construction: Lightweight
• Direct replacement for OE part number: 2104211912
• Manufacturer Part Number: TFR42104

Fits select 1998-2002 Mercedes-Benz C43 AMG, CLK55 AMG, and E55 AMG (4.3L).

This SHW Left Front Smooth Lightweight Brake Rotor is engineered to meet the high-performance demands of classic AMG chassis. By utilizing a lightweight design, this rotor reduces unsprung weight at the wheel hub, which improves suspension articulation and enhances steering response. The smooth surface ensures maximum pad-to-rotor contact for consistent friction levels and reduced brake noise during daily operation.

• Position: Front Left
• Rotor Style: Smooth
• Design: Lightweight Performance Replacement
• Precision machined to exact OE tolerances
• Manufacturer Part Number: TFL42103
• Replaces OE Part Number: 2104211812

Fits select 2005-2025 Porsche Boxster and Cayman models, including 718 variants (2.0L).

This SHW Rear Drilled MB Brake Rotor is engineered for high-performance European vehicles requiring consistent thermal management and stopping power. Featuring a precision cross-drilled surface, this rotor facilitates efficient heat dissipation and gas venting to maintain friction levels and reduce brake fade during spirited driving. This rotor is specifically designed as a direct replacement for vehicles equipped with standard steel/iron braking systems and is not compatible with ceramic brake options.

• Manufacturer Part Number: PRX39873
• Rotor Type: Cross-Drilled MB
• Position: Rear
• Fitment: For models without Ceramic Brakes
• Design: Drilled for superior cooling and wet-weather performance

Fits 2010-2016 Porsche Panamera Turbo, Turbo S, GTS, and Exclusive models (4.8L) equipped with standard steel brakes.

This SHW Right Rear Slotted Monobloc Brake Rotor is an high-performance replacement engineered to maintain the braking integrity of your Porsche Panamera. As a monobloc design, it provides consistent pedal feel and structural rigidity. The rotor face is precision-slotted to effectively evacuate brake dust, gases, and water, ensuring a clean contact patch between the pad and the rotor surface under demanding driving conditions.

• Manufacturer Part Number: PRR39728
• Position: Right Rear
• Design: Slotted Monobloc construction
• Cooling Efficiency: Features Original Equipment (OE) vane configuration to ensure proper airflow and maximum heat dissipation
• Compatibility: For models without Carbon Ceramic brake systems

By utilizing the factory-specified vane configuration, this rotor prevents thermal soak and reduces the risk of brake fade, making it an ideal choice for maintaining the factory performance characteristics of your 4.8L Panamera.

Fits select 2017-2024 Porsche 911 models (3.0L) including Carrera, Turbo, GT3, and Targa trims equipped with factory steel braking systems.

This SHW MB series brake rotor is a high-performance replacement designed specifically for the right rear position. Engineered to meet the demanding thermal requirements of the Porsche 911 platform, the cross-drilled surface pattern effectively clears gas and debris from the pad interface while significantly improving heat dissipation. This ensures consistent pedal feel and reduced brake fade during high-load operating conditions.

• Position: Right Rear
• Rotor Style: Cross-Drilled MB
• Brake System: For vehicles without Ceramic Brakes
• Engine Compatibility: 3.0L
• Manufacturer Part Number: PRR31624
• OE Reference Number: 9P1615602

Fits select 2001-2016 Porsche 911 models (3.8L) including Carrera, Turbo, Targa, and GT series. This rotor is specifically designed for vehicles equipped with standard iron brake systems and is not compatible with Carbon Ceramic (PCCB) options.

This SHW MB series brake rotor provides a direct-replacement performance upgrade for the rear right corner of your Porsche. The drilled and dimpled surface pattern is engineered to maximize heat dissipation, vent out-gassing during aggressive braking, and maintain a consistent friction surface by shedding water and debris. Built to exacting tolerances, this rotor ensures smooth operation and reliable stopping power for both daily driving and spirited performance applications.

• Position: Rear Right
• Surface Finish: Drilled and Dimpled
• System Compatibility: For models without Ceramic Brakes (Iron Discs only)
• Series: MB
• Manufacturer Part Number: PRR31224
• OE Interchange: 99635240602

Fits select 2016-2025 Porsche 718 Boxster, 718 Cayman, Boxster, and Cayman models without ceramic brakes.

The SHW Left Rear Drilled MB Brake Rotor (PRL39823) is a high-performance braking solution engineered to meet the exact tolerances required for Porsche GT and Spyder variants. Designed specifically for vehicles equipped with factory iron rotors rather than Porsche Ceramic Composite Brakes (PCCB), this rotor features a precision-drilled surface that maximizes heat dissipation and maintains a clean pad contact surface for consistent stopping power during spirited use.

• Precision Performance: Cross-drilled design effectively vents gases and heat to minimize brake fade.
• OEM Integration: Engineered to replace OE part number 98135240300, ensuring a direct bolt-on fit without modification.
• Position: Left Rear.
• Quality Tested: Rigorously manufactured to provide long-lasting service life and predictable pedal feel.

Note: Only for use on vehicles without ceramic brakes.

Fits select 2010-2016 Porsche Panamera models (4.8L) including GTS, Turbo, Turbo S, and Exclusive editions without Ceramic Brakes.

Engineered to restore factory braking performance and heat management, this SHW Performance left rear brake rotor features a slotted monobloc design. The precision-machined slots help evacuate brake dust, water, and gases from the pad surface, ensuring consistent bite and reducing the risk of glazing during spirited driving. As a direct replacement for your worn factory component, this rotor is designed to work with the Panamera's heavy-duty iron brake system, providing the thermal stability required for the 4.8L's power output.

• Position: Left Rear (Driver Side)
• Design: Slotted Monobloc
• Compatibility: For vehicles without Ceramic Composite Brakes
• Bore/Fitment: Direct OE-replacement fit
• Manufacturer Part Number: PRL39727
• Reference Number: 298615601B

Upgrade your Porsche's braking performance with this SHW Drilled & Dimpled Brake Rotor. Designed for the left rear position, this rotor is a direct replacement for 2001-2016 Porsche 911 models equipped with standard cast-iron braking systems. It is engineered to provide consistent heat dissipation and bite for high-performance street or track use.

Fits select 2001-2016 Porsche 911 models including Carrera, Turbo, Targa, GT2, and GT3 (3.8L) without Ceramic brakes.

• Position: Left Rear
• Design: Drilled and Dimpled for superior cooling and gas evacuation
• Compatibility: Only for vehicles without Ceramic Composite Brakes (PCCB)
• Material: High-carbon cast iron for maximum thermal stability
• Manufacturer Part Number: PRL31124
• OE Cross-Reference: 99635240502

This rotor replaces worn factory units, restoring the braking torque and heat management required by the Porsche 911 platform. The drilled and dimpled surface prevents brake fade by venting gases and maintaining a clean contact patch between the pad and rotor.

Fits select 2011-2018 Porsche Cayenne models (Base, Diesel, GTS, S, Turbo, and Turbo S) equipped with 19-inch wheels and standard braking systems without ceramic rotors.

This SHW lightweight (LW) brake rotor is engineered as a precision direct-fit replacement for the front right position. Utilizing a smooth friction surface, this rotor provides consistent pad contact and predictable bite. The internal OEM-style vane configuration is specifically designed to pull heat from the inner part of the wheel and draw it away from the caliper, helping to prevent brake fade during spirited driving or heavy vehicle loads.

• Position: Front Right
• Rotor Style: Smooth surface for maximum pad contact
• Vane Style: OEM directional cooling vanes
• Fitment Note: For vehicles with 19-inch wheels only; not for use with Ceramic Brake systems
• Manufacturer Part Number: PFR47524
• OE Reference Number: 95835140450

Fits select 2012-2016 Porsche 911, Boxster Spyder, and Cayman GT4 models without ceramic brakes. This SHW MB series brake rotor is engineered as a high-performance replacement for your factory braking system, specifically designed for vehicles equipped with cast-iron rotors rather than PCCB (Porsche Ceramic Composite Brake) systems.

This right front rotor features a drilled and dimpled surface pattern, designed to optimize gas venting, improve initial bite, and maintain consistent performance under high thermal loads. SHW’s precision casting and machining ensure OE-level balance and fitment, making it an ideal choice for enthusiasts looking to maintain or enhance their vehicle's stopping power during spirited driving or track sessions.

• Position: Right Front
• Design: Drilled and Dimpled (MB Series)
• MPN: PFR39912
• OE Reference: 99135140401
• Fitment Note: For models without ceramic brakes only

Authoritative Vehicle Fitment

Fits select 2005-2008 Porsche Boxster and Cayman models (2.7L).

This SHW Monobloc brake rotor is engineered to meet the high-performance demands of your Porsche braking system. Featuring a precision cross-drilled design, this right-front rotor provides superior heat dissipation and gas venting, ensuring consistent stopping power and reduced brake fade during spirited driving. As a direct replacement for the factory component, it maintains the strict tolerances and balance required for the 987 chassis.

• Position: Right Front
• Type: Cross-Drilled Monobloc
• Manufacturer Part Number: PFR39872
• OEM Reference Number: 98735140201
• Engine Compatibility: 2.7L Flat-6

Each rotor is manufactured with high-carbon metallurgy for improved thermal stability and resistance to warping. The cross-drilled pattern not only enhances wet-weather performance by clearing water from the pad surface but also reduces unsprung weight for better suspension response.

Fits select 2013-2016 Porsche Boxster and Cayman models (2.7L) equipped without ceramic brakes.

This SHW Performance brake rotor is a high-performance replacement for the right front position, engineered to provide consistent stopping power and thermal management. Featuring a precision drilled and dimpled surface pattern, this rotor effectively vents gases and clears brake dust to maintain a clean contact patch between the pad and rotor. The MB-series design ensures a direct OE fitment while offering the durability required for spirited driving and heat cycles.

• Position: Front Right
• Surface Style: Drilled and Dimpled
• Manufacturer Part Number: PFR39812
• Construction: MB High-Carbon Design
• Compatibility: For models without Ceramic Composite Brakes (PCCB)

Fits 2017-2025 Porsche Panamera (including Base, 4, 4S, GTS, and Turbo models) equipped with factory black calipers and without ceramic composite brakes.

This SHW MB Series right front brake rotor is a direct-replacement performance component engineered to restore original braking feel and heat dissipation. As an original equipment manufacturer, SHW produces this rotor with a smooth surface finish to ensure consistent pad contact and reliable stopping power across all driving conditions. This rotor is designed specifically for vehicles with iron brake systems, offering a precise fit that bolts directly to factory hubs.

• Position: Right Front
• Series: MB Rotor (Smooth)
• Surface Finish: Smooth
• Manufacturer Part Number: PFR39736
• Compatibility: For models with Black Calipers and without Ceramic Brakes (PCCB)
• High-carbon metallurgy for improved thermal stability and reduced brake fade

Fits select 2019-2025 Porsche Macan Base, GTS, S, and Turbo models (2.9L).

Restore original equipment braking performance and thermal consistency with this SHW Right Front Smooth Monobloc Brake Rotor. Engineered to meet the rigorous demands of the Macan chassis, this rotor utilizes a high-carbon monobloc casting to ensure maximum structural integrity and heat dissipation. The smooth surface finish provides a consistent friction coefficient and quiet operation, making it an ideal replacement for worn or warped factory rotors.

• Position: Right Front
• Rotor Construction: Monobloc
• Surface Style: Smooth
• Manufacturer Part Number: PFR39528
• OE Interchange: 95B615302AA
• Fitment Type: Direct replacement for factory mounting points

Fits 2021-2025 Porsche Macan Base, GTS, S, and T models (2.0L).

This SHW Smooth Monobloc front right brake rotor is engineered to meet the exact tolerances required for the Porsche Macan braking system. As an established manufacturer of high-performance braking components, SHW utilizes advanced casting and machining processes to ensure consistent thermal stability and vibration-free operation. This monobloc rotor replaces worn factory units, restoring the firm pedal feel and reliable stopping power expected from a Porsche-spec component.

• Position: Front Right
• Construction: Monobloc cast iron for superior structural integrity
• Surface Finish: Smooth face for consistent pad contact and reduced noise
• Manufacturer Part Number: PFR39526
• OE Reference: 95B615302AB
• Quality tested for long-lasting performance and heat dissipation

Vehicle Fitment:

• 2021-2025 Porsche Macan Base
• 2022-2024 Porsche Macan GTS
• 2022-2024 Porsche Macan S
• 2023-2025 Porsche Macan T

Fits select 2015-2018 Porsche Macan Base, GTS, S, and Turbo models equipped with the 3.0L engine.

Maintain factory-level braking performance with this SHW Right Front Smooth Monobloc Brake Rotor. Specifically engineered as a direct replacement for vehicles without carbon-ceramic braking systems, this monobloc rotor is manufactured to strict tolerances to ensure consistent thermal stability and reliable stopping power. The smooth friction surface provides optimal pad-to-rotor contact and quiet operation during daily driving or spirited use.

• Manufacturer Part Number: PFR39522
• Position: Right Front
• Rotor Style: Smooth Monobloc
• Fitment Note: For vehicles without Ceramic Brakes
• Engine: 3.0L

Fits select 2001-2012 Porsche 911 Carrera S, Carrera 4S, GTS, Targa 4S, and Turbo models (3.8L).

This high-performance brake rotor from SHW is engineered specifically for the right-front position of the Porsche 911 chassis. Featuring a drilled and dimpled MB design, this rotor provides improved heat dissipation and consistent braking performance under demanding conditions. Designed as a direct-fit replacement for vehicles without ceramic brakes, it ensures factory-level fitment and reliable stopping power.

• Position: Right Front
• Design: Drilled-Dimpled MB
• Material: High-quality casting for heat resistance and durability
• Fitment Note: Specifically for vehicles without Ceramic Brakes
• Manufacturer Part Number: PFR31022
• Cross Reference Part Number: 99635141004

Fits select 2015-2018 Porsche Macan (Base, GTS, S, and Turbo) equipped with 19-inch wheels or the Factory Performance Package.

Replace your worn or warped front left rotor with this premium Slotted Lightweight (LW) replacement from SHW Performance. Engineered to meet or exceed original equipment standards, this rotor features a slotted friction surface designed to vent gases and clear debris from the brake pad interface. This maintains a consistent bite and helps prevent brake fade during spirited driving or high-load situations.

The lightweight design reduces unsprung mass, which improves suspension articulation and steering response. As a direct-fit replacement, this rotor installs without modification on Macan models specified for larger 19-inch wheel configurations or Performance Package braking systems.

• Position: Front Left (Driver Side)
• Type: Slotted Lightweight (LW)
• Manufacturer Part Number: PFL49531
• OE Reference Number: 95B615301P
• Application: Specific to 19in Wheel / Performance Package models

Fits select 2011-2018 Porsche Cayenne models (Base, Diesel, GTS, S, and Turbo) equipped with 19-inch wheels and standard braking systems; does not fit vehicles with Carbon Ceramic brakes.

This SHW lightweight (LW) brake rotor is engineered to provide consistent stopping power while reducing unsprung weight for improved suspension response. Featuring a smooth surface finish, this rotor ensures optimal pad-to-rotor contact and quiet operation. It is a direct replacement for the left front position, designed to match the precise tolerances required for Porsche braking systems.

• Position: Left Front
• Surface Style: Smooth
• Wheel Compatibility: Fits models with 19-inch factory wheels
• Construction: Lightweight (LW) design to reduce rotational mass
• Brake System: For models without Ceramic Composite Brakes (PCCB)
• Manufacturer Part Number: PFL47523
• OE Reference: 95835140350

Fits select 2012-2016 Porsche 911, Boxster Spyder, and Cayman GT4 (3.8L) models without ceramic brakes.

This SHW high-performance front left brake rotor (PFL39911) is engineered to meet the thermal demands of spirited driving and track applications. Featuring a drilled and dimpled surface, this MB-series rotor optimizes heat dissipation and gas evacuation, providing up to 50% better cooling compared to standard designs to prevent brake fade. It is designed as a direct-fit replacement for the factory component, ensuring precise installation and consistent stopping performance.

• Position: Front Left
• Surface Style: Drilled and Dimpled
• Brake System: Optimized for vehicles without Ceramic Brakes
• Engine Compatibility: 3.8L
• Series: MB Monoblock High-Performance
• Manufacturer Part Number: PFL39911
• Reference OE Number: 99135140301

Fits 2005-2008 Porsche Boxster and 2007-2008 Porsche Cayman (2.7L).

This SHW monobloc brake rotor is engineered to provide reliable stopping power and improved heat management for your Porsche. The cross-drilled design effectively vents gases and brake dust, ensuring a clean pad contact surface for consistent braking performance. As a direct replacement for the factory unit, this rotor is machined to tight tolerances for a precise fit and balanced rotation.

• Position: Left Front
• Design: Monobloc, cross-drilled
• Optimized thermal dissipation for reduced brake fade
• Engineered for direct OE replacement compatibility
• Manufacturer Part Number: PFL39871
• Cross-reference OE Number: 98735140101

Fits 2013-2016 Porsche Boxster and Cayman (2.7L) models without ceramic brakes.

This SHW Performance brake rotor is engineered as a direct-fit replacement for the factory left front unit on Porsche 981 chassis vehicles. Featuring a specialized Drilled and Dimpled MB design, this rotor provides superior thermal management and consistent friction levels by effectively venting gases and clearing brake dust from the pad surface. This design ensures reliable stopping power and reduced brake fade during performance driving conditions.

• Manufacturer Part Number: PFL39811
• OE Cross-Reference: 98135140101
• Position: Left Front
• Rotor Pattern: Drilled and Dimpled MB
• Fitment: Specific to models with the 2.7L engine and standard iron brakes
• Compatibility: Replaces original equipment on vehicles without Porsche Ceramic Composite Brakes (PCCB)

Fits select 2017-2025 Porsche Panamera models (including Base, 4, 4S, GTS, and Turbo) equipped with black calipers and standard steel brakes (w/o Ceramics).

The SHW Smooth MB series brake rotor provides a precision-engineered direct replacement for the front left position, specifically designed to handle the high thermal loads of the Panamera platform. This rotor is manufactured to rigorous standards, offering up to 50% better cooling efficiency to mitigate brake fade and maintain consistent pedal feel under demanding conditions. As a specialist component for vehicles with factory black calipers, it ensures exact fitment and OE-level integration without the need for modifications.

• Brand: SHW
• Series: Smooth MB
• Position: Front Left
• MPN: PFL39735
• OE Reference: 971615301
• Brake System: For vehicles without Ceramic Brakes
• Caliper Note: For vehicles with Black Calipers
• Surface Style: Smooth