Fits 2014-2017 Chevrolet Silverado 1500 and GMC Sierra 1500 (5.3L / 6.2L). Designed specifically for 2WD and 4WD models in Double Cab with Standard Box, or Crew Cab with Short or Standard Box configurations.

Improve exhaust scavenge and engine efficiency with this Stainless Works header system. Engineered for the 5.3L and 6.2L EcoTec3 engines, these headers feature high-flow catalytic converters to maintain flow while meeting performance needs. This system is built using the Performance Connect configuration, designed to bolt directly to Stainless Works true-dual exhaust systems for a seamless, high-performance exhaust path.

• Manufactured from high-grade stainless steel for maximum durability
• Includes high-flow catalytic converters
• Performance Connect design for Stainless Works true-dual exhausts
• Proudly made in the USA
• Backed by a limited lifetime guarantee on material and workmanship
• Manufacturer Part Number: CT14HCAT

Fits select 2007-2018 Chevrolet Silverado 1500 and GMC Sierra 1500 (5.3L / 6.2L).

Maximize the performance and acoustic profile of your truck with the Stainless Works CT14CB exhaust system. This Performance Connect series system is engineered to mate directly to Stainless Works Performance Connect headers, facilitating a true-dual configuration for optimized exhaust flow and horsepower gains. Designed specifically for 1500 2WD/4WD models, this system accommodates Double Cab configurations with a Standard Box, as well as Crew Cab models with either a Short or Standard Box.

• Exit Location: Exits behind the passenger-side rear tire.
• System Type: Performance Connect (requires Stainless Works headers).
• Durability: Built to withstand high-heat environments and harsh driving conditions.
• Warranty: Backed by a Limited Lifetime Guarantee on materials and workmanship.
• MPN: CT14CB

Fits 2007-2013 Chevrolet Silverado 1500 and GMC Sierra 1500 (5.3L) models, specifically 2WD/4WD Double Cab with Standard Box, or Crew Cab with Short or Standard Box.

The Stainless Works Factory Connect system (MPN: CT07HCATY) is engineered to replace restrictive factory manifolds with 1-7/8" diameter primary tubes and high-flow catalytic converters. Designed for a seamless installation, these headers bolt directly to the factory connection point behind the original catalytic converter location using the included Y-pipe and 3" diameter lead pipes. Each system is TIG welded for maximum durability and features 3/8" thick flanges to ensure a leak-free seal against the cylinder head.

• 304 stainless steel construction for superior corrosion resistance
• 1-7/8" primary tubes with 3" slip-fit collectors and integrated merge spikes
• Includes high-flow catalytic converters and Y-pipe
• Heavy-duty 3/8" thick flanges
• Factory Connect design compatible with OEM connection points
• Proudly made in the USA
• Manufacturer Part Number: CT07HCATY

Fits select 2003-2011 Ford Crown Victoria and Mercury Grand Marquis models (4.6L).

Improve exhaust scavenge and flow on your modular 4.6L 2V engine with this Stainless Works header system. These performance headers are engineered with 1-5/8 inch primaries and 3 inch slip-fit collectors, feeding into 2.5 inch diameter lead pipes equipped with high-flow catalytic converters. This design significantly reduces backpressure compared to the restrictive factory manifolds while maintaining a direct-fit connection to the flanged factory exhaust points.

Built for durability and long-term performance, these headers are manufactured in the USA from high-grade stainless steel and are fully TIG welded. This comprehensive kit (MPN: CRVIC03HCAT) includes essential installation components to ensure a professional result without the need for custom fabrication.

• 1-5/8 inch primary tube diameter
• 3 inch slip-fit collectors
• 2.5 inch diameter catted lead pipes
• High-flow catalytic converters included
• Full stainless steel construction, TIG welded
• Direct-fit to factory flanged connection points
• Includes necessary O2 sensor extensions and clamps
• Made in the USA
• Manufacturer Part Number: CRVIC03HCAT

Fits select 2003-2011 Ford Crown Victoria and Mercury Grand Marquis models equipped with the 4.6L engine.

This Stainless Works catback exhaust system is engineered to improve the sound and flow of your Panther platform vehicle. Constructed from 2.5-inch diameter tubing, this kit features dual chambered turbo mufflers that provide a classic, aggressive exhaust note without the drone of straight-through designs. The system is finished with dual 3.5-inch polished factory-style tips for a clean, integrated look.

Designed for a straightforward installation, this kit fits flanged factory connection points and is compatible with either the stock manifolds or Stainless Works headers with leads. Whether you are maintaining a Police Interceptor or upgrading a Grand Marquis, this stainless steel system offers the durability and fitment expected from a premium exhaust specialist.

• Manufacturer Part Number: CRVIC03CB
• Tubing Diameter: 2.5 inches
• Muffler Type: Dual chambered turbo mufflers
• Exit Style: Dual 3.5-inch diameter polished tips
• Material: High-quality stainless steel
• Installation: Bolts to factory flanged connection points

Fits 2016-2020 Chevrolet Camaro SS and 2017-2020 Chevrolet Camaro ZL1 (6.2L).

The Stainless Works Redline Series Axle-Back exhaust system is engineered to provide the most aggressive sound profile available for the sixth-generation Camaro. This 3-inch system is constructed from premium 304 stainless steel and features dual Turbo Custom mufflers designed specifically for high-output applications. As a Factory Connect system, it bolts directly to the OEM connection points for a straightforward installation.

This kit includes integrated NPP-style valves within the mufflers, allowing you to maintain functionality of the factory dual-mode exhaust settings. The system is finished with quad 4-inch polished tips for a refined, muscular aesthetic.

• Manufacturer Part Number: CA16RVMKSFCR
• Material: 304 Stainless Steel
• Tubing Diameter: 3-inch mandrel-bent
• Tip Size: 4-inch Quad Polished
• Muffler Type: Dual Turbo Custom
• Valve Type: NPP valve in muffler
• Connection Type: Factory Connect (Bolts to OEM housing)

Fits 2016-2021 Chevrolet Camaro SS (V8-6.2L).

The Stainless Works Redline Series axle-back exhaust is engineered for the 6th Gen Camaro owner seeking the most aggressive sound profile available. This system replaces the restrictive factory mufflers with 3-inch mandrel-bent T304 stainless steel tubing to maximize flow and enhance the V8 exhaust note. The "Factory Connect" design ensures this kit bolts directly to the original equipment connection points for a straightforward installation.

This system maintains the functionality of your vehicle's Dual Mode Exhaust with integrated valves, allowing you to control the sound volume through the factory drive modes. The exit is finished with aggressive 4-inch quad tips in a sleek black finish for a custom aesthetic.

• Series: Redline (Aggressive Sound)
• Tubing Diameter: 3-inch
• Material: 304 Stainless Steel
• Tip Diameter: 4-inch Quad Tips
• Tip Finish: Black
• Connection: Factory Connect
• Features: Integrated Valves (NPP Compatible)
• Manufacturer Part Number: CA16RVMKFRBC

Fits 2016-2020 Chevrolet Camaro SS and ZL1 (6.2L).

Maximize the exhaust flow and acoustic profile of your LT1 or LT4 engine with this Stainless Works header-back system. Engineered specifically for high-output and supercharged applications, these headers feature large 2-inch primary tubes and a 3-inch X-pipe assembly. The CNC mandrel-bent 304 stainless steel construction ensures consistent internal diameters, while the port-matched flanges provide a seamless transition from the cylinder heads to the primaries.

This system includes 200-cell high-flow catalytic converters designed to reduce backpressure without sacrificing emissions efficiency. To prevent dashboard error codes after installation, Stainless Works includes specialized AFM (Active Fuel Management) valve delete plates. These plates allow you to mount the factory valve motors securely, maintaining electronic integrity while optimizing exhaust flow. Each system is TIG-welded at the Stainless Works facility in Streetsboro, Ohio, and is backed by a lifetime warranty on materials and craftsmanship.

• Manufacturer Part Number: CA16HCAT
• Primary Tube Diameter: 2.0 inches
• System Diameter: 3.0 inches with X-pipe
• Material: 304 Stainless Steel
• Catalytic Converters: 200-cell high-flow
• Includes AFM valve delete plates for stock motor mounting
• TIG-welded construction
• Lifetime warranty on materials and workmanship
• Made in the USA

Enhance the exhaust scavenging and performance of your C8 Stingray with the Stainless Works High-Flow Catted Midpipe Kit. Engineered for the 2020-2021 Chevrolet Corvette C8 (6.2L), this kit utilizes 3-inch mandrel-bent tubing to significantly reduce exhaust backpressure compared to the stock mid-section. By incorporating high-flow catalytic converters, it provides a performance-oriented exhaust note and improved flow while maintaining a catted configuration.

• Fits 2020-2021 Chevrolet Corvette C8 (6.2L)
• 3-inch diameter tubing for increased exhaust volume and flow
• Integrated high-flow catalytic converters for reduced restriction
• Constructed from durable stainless steel to resist corrosion and heat
• Engineered as a direct-fit replacement for factory mid-pipes
• Manufacturer Part Number: C8CATLDS

Fits 2014-2019 Chevrolet Corvette Stingray, Grand Sport, Z06, and ZR1 models (6.2L).

Maximize the performance of your C7 Corvette with this Stainless Works long tube header system. Engineered for high-output 6.2L engines, these headers feature large 2-inch diameter primaries measuring 31 inches in length, feeding into 3-inch slip-fit collectors. This design significantly reduces backpressure compared to factory manifolds, allowing for superior exhaust scavenging and increased power.

The kit includes a 3-inch high-flow catted center section equipped with an integrated X-pipe to balance exhaust pulses and deliver a refined, aggressive tone. Built for longevity and precision, the entire system is CNC mandrel bent and TIG welded with a mill finish. It is designed to bolt directly to the factory axle-back connection points for a straightforward installation.

• Manufacturer Part Number: C72CAT
• Primaries: 2-inch diameter, 31-inch length
• Collectors: 3-inch slip-fit
• Center Section: 3-inch with high-flow catalytic converters and X-pipe
• Construction: TIG welded, CNC mandrel bent
• Finish: Mill finish
• Fitment: Connects to factory axle-back
• Origin: Made in the USA
• Warranty: Manufacturer lifetime warranty

Fits 2014-2019 Chevrolet Corvette C7 Stingray, Grand Sport, Z06, and ZR1 models.

Maximize the exhaust flow and acoustic profile of your C7 Corvette with these Stainless Works long-tube headers. Engineered for significant scavenging gains, these headers feature 1-7/8 inch diameter primary tubes with a precise 31-inch total primary length. The system transitions into 3-inch diameter slip-fit collectors and includes a matching 3-inch catted center section with an integrated X-pipe to balance exhaust pulses and eliminate drone.

Built from high-grade stainless steel, this kit is designed to bolt directly to your factory axle-back connection point, simplifying installation while maintaining high-flow performance through the included catalytic converters.

• Manufacturer Part Number: C7188CAT
• Primary Tube Diameter: 1-7/8 in.
• Primary Tube Length: 31 in.
• Collector Diameter: 3 in.
• System Type: Long tube headers with X-pipe and high-flow cats
• Connection: Fits factory axle-back connection point
• Fits: 2014-2019 Chevrolet Corvette (Stingray/Z06/ZR1/Grand Sport)

Fits 2000-2003 Chevrolet Silverado and GMC Sierra 2500/3500 3/4 ton trucks (8.1L).

Improve exhaust flow and engine efficiency on your heavy-duty GM truck with Stainless Works Long Tube Headers (81TRK). Engineered specifically for the 8.1L big block, these headers feature 2" primary tubes and 3" collectors designed to bolt directly to your factory head pipe and catalytic converters. Each set is constructed from CNC mandrel-bent 304 stainless steel to provide maximum corrosion resistance and consistent exhaust scavenging.

• CNC mandrel-bent 304 stainless steel tubing
• 2" primary tubes with 3" collectors
• Fully TIG welded and back purged for superior joint strength and durability
• Direct-fit connection to factory head pipe and catalytic converters
• Manufacturer Part Number: 81TRK
• Proudly made in the USA
• Lifetime warranty included

The Stainless Works Boxxter Exhaust Tip (801250-WG) is a specialized, low-profile solution designed for custom exhaust exits through valance panels or running boards. Featuring a unique 90-degree inlet-to-outlet configuration, this tip solves clearance issues in tight spaces while providing a clean, high-end aesthetic. Each tip is laser-cut from premium 304 stainless steel to ensure maximum corrosion resistance and durability in harsh conditions.

Built to handle the rigors of performance driving, these tips are TIG-welded for superior joint strength and finished with a hand-mirror polish. The rolled edge and integrated internal grate provide a refined look that hides raw exhaust piping. This American-made component is ideal for fabricators and enthusiasts looking for a durable, show-quality finish on a custom exhaust system.

• Inlet Diameter: 2.5-inch (2 1/2") ID
• Outlet Dimensions: 1.5-inch x 8.5-inch
• Material: 304 Stainless Steel
• Finish: Hand-Mirror Polished
• Configuration: 90-Degree bend with rolled edge and grate
• Construction: Laser-cut and TIG-welded
• Manufacturer Part Number: 801250-WG
• Warranty: Lifetime
• Made in the USA

Fits 2006-2010 Jeep Grand Cherokee SRT8 (6.1L).

Improve the exhaust flow and performance of your SRT8 with these Stainless Works long tube headers. Engineered with 1.875-inch D-shaped primary tubes to match the cylinder head ports, these headers transition into a 3-inch slip-fit collector for maximum scavenging. This system includes 3-inch lead pipes and high-flow catalytic converters, featuring flared flanged ends designed to bolt directly to your factory exhaust or a Stainless Works 3-inch exhaust system.

Constructed entirely from 304 stainless steel, these headers feature 3/8-inch thick CNC laser-cut flanges for a warp-free seal at the cylinder head. The package comes complete with everything needed for installation, including O2 sensor extensions, stainless steel clamps, hangers, and hardware.

• 1-7/8 inch (1.875") D-shaped primary tubes for optimized port matching
• 3-inch slip-fit collectors and lead pipes
• 3-inch high-flow catalytic converters included
• CNC laser-cut 3/8-inch thick 304 stainless steel flanges
• Full 304 stainless steel construction for corrosion resistance
• Includes all necessary O2 extensions, SS clamps, and hardware
• Manufacturer Part Number: 60753372BT

Improve exhaust scavenge and flow with the Stainless Works 3-inch parallel X-pipe. This universal component is engineered for custom exhaust builds, featuring a 4.125-inch center-to-center spacing and inlets expanded to a 3-inch inside diameter (ID) for easy slip-fit integration. Each unit is constructed from premium 304 stainless steel, providing superior corrosion resistance compared to 400-series or aluminized alternatives.

• Precision Manufacturing: CNC mandrel bent for consistent diameter through all bends to eliminate flow restrictions.
• Durable Construction: TIG welded for maximum joint strength and longevity in high-heat environments.
• Specifications: 3-inch tubing diameter with a length range of 18 to 36 inches.
• Quality Assured: Proudly manufactured in the USA and backed by a lifetime warranty.
• MPN: 3XP413SS

This 2-foot section of Stainless Works straight tubing is engineered for high-performance exhaust fabrication, header construction, and custom intake plumbing. Manufactured from premium 304 stainless steel, it provides exceptional corrosion resistance and durability under high-heat conditions.

With a 1-7/8 inch outer diameter and a .065-inch (16-gauge) wall thickness, this tubing is ideal for TIG welding and provides a consistent foundation for custom automotive projects. Every piece is proudly made in the USA to ensure tight tolerances and reliable material quality for professional fabricators and DIY builders alike.

• Material: 304 Stainless Steel
• Outside Diameter: 1-7/8 in
• Wall Thickness: .065 in (16-Gauge)
• Length: 2 ft
• Finish: Natural
• Country of Origin: USA
• Manufacturer Part Number: 1.8SS-2