ARB bumpers are engineered and manufactured for durability, functionality and aesthetic. The Summit Bar continues this tradition with fitment for the Toyota 4Runner. The ARB Summit Bar accommodates the 4Runner's Adaptive Cruise Control system and original equipment (OE) fog lights. These two Toyota Safety Sense features are preserved by relocating the Adaptive Cruise Control sensors within the split pan of the Summit bar, and an ARB-developed fog light surround. Full OE adjustment is retained. The ARB Summit bar features press form cover straps, fog light surround to accommodate OE fog lights, three piece split pan grill with access door for winch clutch operation and a recessed winch control box mount for a sleek, integrated appearance. The dynamic nature of the 4Runner chassis requires clearance for the ARB bar and the fenders and grill of the 4Runner. To achieve this necessary clearance, the wings of the bar have been designed and developed to both follow the OE bumper and to sit beneath the bumper on the outer edges.

• Hawse fairlead spacer kit part 3500600 required when fitting a hawse fairlead (synthetic winch)
• Compatible with most electic low mount winches, up to 10,000 lb
• Multi-fold, tapered wings for optimal strength, approach angle
• Durable steel construction for maximum protection
• Twin jack points located beneath each buffer
• Air bag compatible chassis mounting system
• Compatible with OE Adaptive Cruise Control
• Suits Toyota Safety Sense (TSS)
• Compatible with OE Fog Lights
• Provision for Driving Lights
• Durable, two-piece buffers
• Durable Two-Piece Buffers

This Part Fits:

Unlike most brush guards and bumpers, ARB Bumpers incorporate a fully engineered mounting system which completely replaces the factory bumper. ARBs Deluxe Bumper selection is the most extensive. Loaded with features aimed at making remote area travel safe, no other bumper offers the same degree of vehicle integration, protection or functionality.

• Loom required when installing fog light kit part 3500440 (halogen) or 3500520 (LED)
• Hawse fairlead spacer kit part 3500600 required when fitting a hawse fairlead
• Compatible with most electic low mount winches, up to 10,000 lb capacity
• Optional ARB fog light kit part 6821201 (halogen) or 3500890 (LED)
• Multi Fold Upswept And Tapered Wing Design
• Extensive Under Protection Panels
• Provision for Driving Lights
• Twin Hi-Lift Jacking Points
• Durable Steel Construction
• Durable Urethane Buffers
• Black Powder Coat
• Split Pan Design

This Part Fits:

Unlike most brush guards and bumpers, ARB Bumpers incorporate a fully engineered mounting system which completely replaces the factory bumper. ARBs Deluxe Bumper selection is the most extensive. Loaded with features aimed at making remote area travel safe, no other bumper offers the same degree of vehicle integration, protection or functionality.

• Loom required when installing fog light kit part 3500440 (halogen) or 3500520 (LED)
• Hawse fairlead spacer kit part 3500600 required when fitting a hawse fairlead
• Compatible with most electic low mount winches, up to 10,000 lb capacity
• Optional ARB fog light kit part 6821201 (halogen) or 3500890 (LED)
• Multi Fold Upswept And Tapered Wing Design
• Front Deluxe Bull Bar Winch Mount Bumper
• Extensive Under Protection Panels
• Provision for Driving Lights
• Twin Hi-Lift Jacking Points
• Durable Steel Construction
• Durable Urethane Buffers
• Black Powder Coat
• Split Pan Design

This Part Fits:

Unlike most brush guards and bumpers, ARB Bumpers incorporate a fully engineered mounting system which completely replaces the factory bumper. ARBs Deluxe Bumper selection is the most extensive. Loaded with features aimed at making remote area travel safe, no other bumper offers the same degree of vehicle integration, protection or functionality.

• Loom required when installing fog light kit part 3500440 (halogen) or 3500520 (LED)
• Hawse fairlead spacer kit part 3500600 required when fitting a hawse fairlead
• Compatible with most electic low mount winches, up to 10,000 lb capacity
• Optional ARB fog light kit part 6821201 (halogen) or 3500890 (LED)
• Multi Fold Upswept And Tapered Wing Design
• Extensive Under Protection Panels
• Provision for Driving Lights
• Twin Hi-Lift Jacking Points
• Durable Steel Construction
• Durable Urethane Buffers
• Black Powder Coat
• Split Pan Design

This Part Fits:

Unlike most brush guards and bumpers, ARB Bumpers incorporate a fully engineered mounting system which completely replaces the factory bumper. ARBs Deluxe Bumper selection is the most extensive. Loaded with features aimed at making remote area travel safe, no other bumper offers the same degree of vehicle integration, protection or functionality.

• Loom required when installing fog light kit part 3500440 (halogen) or 3500520 (LED)
• Hawse fairlead spacer kit part 3500600 required when fitting a hawse fairlead
• Compatible with most electic low mount winches, up to 10,000 lb capacity
• Optional ARB fog light kit part 6821201 (halogen) or 3500890 (LED)
• Multi Fold Upswept And Tapered Wing Design
• Front Deluxe Bull Bar Winch Mount Bumper
• Extensive Under Protection Panels
• Provision for Driving Lights
• Twin Hi-Lift Jacking Points
• Durable Steel Construction
• Durable Urethane Buffers
• Black Powder Coat
• Split Pan Design

This Part Fits:

Unlike most brush guards and bumpers, ARB Bumpers incorporate a fully engineered mounting system which completely replaces the factory bumper. ARBs Deluxe Bumper selection is the most extensive. Loaded with features aimed at making remote area travel safe, no other bumper offers the same degree of vehicle integration, protection or functionality.

• Loom required when installing fog light kit part 3500440 (halogen) or 3500520 (LED)
• Hawse fairlead spacer kit part 3500600 required when fitting a hawse fairlead
• Compatible with most electic low mount winches, up to 10,000 lb capacity
• Optional ARB fog light kit part 6821201 (halogen) or 3500890 (LED)
• Multi Fold Upswept And Tapered Wing Design
• Extensive Under Protection Panels
• Provision for Driving Lights
• Twin Hi-Lift Jacking Points
• Durable Steel Construction
• Durable Urethane Buffers
• Black Powder Coat
• Split Pan Design

This Part Fits:

Unlike most brush guards and bumpers, ARB Bumpers incorporate a fully engineered mounting system which completely replaces the factory bumper. ARBs Deluxe Bumper selection is the most extensive. Loaded with features aimed at making remote area travel safe, no other bumper offers the same degree of vehicle integration, protection or functionality.

• Loom required when installing fog light kit part 3500440 (halogen) or 3500520 (LED)
• Hawse fairlead spacer kit part 3500600 required when fitting a hawse fairlead
• Compatible with most electic low mount winches, up to 10,000 lb capacity
• Optional ARB fog light kit part 6821201 (halogen) or 3500890 (LED)
• Multi Fold Upswept And Tapered Wing Design
• Extensive Under Protection Panels
• Provision for Driving Lights
• 250 Heavy Grade Wall Tubing
• Twin Hi-Lift Jacking Points
• Durable Steel Construction
• Durable Urethane Buffers
• Black Powder Coat
• Split Pan Design

This Part Fits:

Unlike most brush guards and bumpers, ARB Bumpers incorporate a fully engineered mounting system which completely replaces the factory bumper. ARBs Deluxe Bumper selection is the most extensive. Loaded with features aimed at making remote area travel safe, no other bumper offers the same degree of vehicle integration, protection or functionality.

• REQUIRED fit kit needed model years 2007-2009 part 3520010 and 2010-2014 part 3520020
• Loom required when installing fog light kit part 3500440 (halogen) or 3500520 (LED)
• Hawse fairlead spacer kit part 3500600 required when fitting a hawse fairlead
• Compatible with most electic low mount winches, up to 10,000 lb capacity
• Optional ARB fog light kit part 6821201 (halogen) or 3500890 (LED)
• Multi Fold Upswept And Tapered Wing Design
• Extensive Under Protection Panels
• Twin Hi-Lift Jacking Points
• Durable Steel Construction
• Durable Urethane Buffers
• Black Powder Coat
• Split Pan Design

This Part Fits:

Unlike most brush guards and bumpers, ARB Bumpers incorporate a fully engineered mounting system which completely replaces the factory bumper. ARBs Deluxe Bumper selection is the most extensive. Loaded with features aimed at making remote area travel safe, no other bumper offers the same degree of vehicle integration, protection or functionality.

• REQUIRED fit kit needed model years 2007-2009 part 3520010 and 2010-2014 part 3520020
• Loom required when installing fog light kit part 3500440 (halogen) or 3500520 (LED)
• Hawse fairlead spacer kit part 3500600 required when fitting a hawse fairlead
• Compatible with most electic low mount winches, up to 10,000 lb capacity
• Optional ARB fog light kit part 6821201 (halogen) or 3500890 (LED)
• Multi Fold Upswept And Tapered Wing Design
• Extensive Under Protection Panels
• 250 Heavy Grade Wall Tubing
• Twin Hi-Lift Jacking Points
• Durable Steel Construction
• Durable Urethane Buffers
• Black Powder Coat
• Split Pan Design

This Part Fits:

Unlike most brush guards and bumpers, ARB Bumpers incorporate a fully engineered mounting system which completely replaces the factory bumper. ARBs Deluxe Bumper selection is the most extensive. Loaded with features aimed at making remote area travel safe, no other bumper offers the same degree of vehicle integration, protection or functionality.

• Multi Fold Upswept And Tapered Wing Design
• Provision for Driving Lights
• 250 Heavy Grade Wall Tubing
• Twin Hi-Lift Jacking Points
• Durable Steel Construction
• Durable Urethane Buffers
• Black Powder Coat
• Split Pan Design
• OEM Tow Points

This Part Fits:

The Summit Bumper continues the ARB tradition of pioneering innovation and our relentless pursuit on quality. Summit is a modern interpretation of the renowned ARB Deluxe Bumper, styled to complement modern dual cab and SUV vehicles through a fresh, contemporary design language. Building upon our proven air bag compatible bumper mounting architecture, the Summit Bumper incorporates unique design features such as a 30mm edge radius on the wings and center pan, wider press formed cover straps, 60.3mm top tubing, two-piece polyethylene buffers and redesigned fog light surrounds. This results in the most visually impressive frontal protection system on the market.

• Compatible with OE parking sensors, headlight washers and radar cruise control
• Hawse fairlead spacer kit part 3500600 required when fitting a hawse fairlead
• Compatible with most electic low mount winches, up to 12,000 lb capacity
• Required camera kit part 3515090 for models with forward facing camera
• Multi Fold Upswept And Tapered Wing Design
• Extensive Under Protection Panels
• Twin Hi-Lift Jacking Points
• Durable Steel Construction
• Durable Urethane Buffers
• Suits OE Fog Lights
• Black Powder Coat
• Split Pan Design

This Part Fits:

The all new Summit Bumper continues the ARB tradition of pioneering innovation and our relentless pursuit on quality. Summit is a modern interpretation of the renowned ARB Deluxe Bumper, styled to complement modern dual cab and SUV vehicles through a fresh, contemporary design language. Building upon our proven air bag compatible bumper mounting architecture, the Summit Bumper incorporates unique design features such as a 30mm edge radius on the wings and center pan, wider press formed cover straps, 60.3mm top tubing, two-piece polyethylene buffers and redesigned fog light surrounds. This results in the most visually impressive frontal protection system on the market.

• Compatible with OE parking sensors, headlight washers and radar cruise control
• Hawse fairlead spacer kit part 3500600 required when fitting a hawse fairlead
• Compatible with most electic low mount winches, up to 12,000 lb capacity
• Required camera kit part 3515090 for models with forward facing camera
• Durable Steel Construction For Maximum Protection
• Multi Fold Upswept And Tapered Wing Design
• Extensive Under Protection Panels
• Twin Hi-Lift Jacking Points
• Durable Steel Construction
• Durable Urethane Buffers
• Suits OE Fog Lights
• Black Powder Coat
• Split Pan Design

This Part Fits:

The Summit Bumper continues the ARB tradition of pioneering innovation and our relentless pursuit on quality. Summit is a modern interpretation of the renowned ARB Deluxe Bumper, styled to complement modern dual cab and SUV vehicles through a fresh, contemporary design language. Building upon our proven air bag compatible bumper mounting architecture, the Summit Bumper incorporates unique design features such as a 30mm edge radius on the wings and center pan, wider press formed cover straps, 60.3mm top tubing, two-piece polyethylene buffers and redesigned fog light surrounds. This results in the most visually impressive frontal protection system on the market.

• Hawse fairlead spacer kit part 3500600 required when fitting a hawse fairlead
• Optional LED fog light kit part 3500910 and harness part 3500520 available
• Compatible with most electic low mount winches, up to 12,000 lb capacity
• 60.3mm top tubing for increased frontal protection
• 30mm edge radius on the wings and center pan
• Wider press formed cover straps
• Two-piece polyethylene buffers
• Provision for Driving Lights
• Twin Hi-Lift Jacking Points
• Air bag compatible

This Part Fits:

The all new Summit Bumper continues the ARB tradition of pioneering innovation and our relentless pursuit on quality. Summit is a modern interpretation of the renowned ARB Deluxe Bumper, styled to complement modern dual cab and SUV vehicles through a fresh, contemporary design language. Building upon our proven air bag compatible bumper mounting architecture, the Summit Bumper incorporates unique design features such as a 30mm edge radius on the wings and center pan, wider press formed cover straps, 60.3mm top tubing, two-piece polyethylene buffers and redesigned fog light surrounds. This results in the most visually impressive frontal protection system on the market.

• Hawse fairlead spacer kit part 3500600 required when fitting a hawse fairlead
• Optional LED fog light kit part 3500910 and harness part 3500520 available
• Compatible with most electic low mount winches, up to 12,000 lb capacity
• 60.3mm top tubing for increased frontal protection
• 30mm edge radius on the wings and center pan
• Wider press formed cover straps
• Two-piece polyethylene buffers
• Provision for Driving Lights
• Twin Hi-Lift Jacking Points
• Summit Bull Bar Kit
• Air bag compatible

This Part Fits:

Unlike most brush guards and bumpers, ARB Bumpers incorporate a fully engineered mounting system which completely replaces the factory bumper. ARBs Deluxe Bumper selection is the most extensive. Loaded with features aimed at making remote area travel safe, no other bumper offers the same degree of vehicle integration, protection or functionality.

• Note: 2010+ models with Milennium or Limited grills may require additional modification to fit
• Hawse fairlead spacer kit part 3500600 required when fitting a hawse fairlead
• Compatible with most electric low mount winches, up to 16,500 lb capacity
• Multi Fold Upswept And Tapered Wing Design
• Extensive Under Protection Panels
• Does not fit rock warrior edition
• Provision For IPF Driving Lights
• Provisions For ARB Fog Lights
• Provision for driving lights
• Twin Hi-Lift Jacking Points
• 250 Heavy Grade Wall Tubing
• Durable Steel Construction
• Durable Urethane Buffers
• Black Powder Coat
• Split Pan Design
• OEM Tow Points

This Part Fits:

Unlike most brush guards and bumpers, ARB Bumpers incorporate a fully engineered mounting system which completely replaces the factory bumper. ARBs Deluxe Bumper selection is the most extensive. Loaded with features aimed at making remote area travel safe, no other bumper offers the same degree of vehicle integration, protection or functionality.

• Loom required when installing fog light kit part 3500440 (halogen) or 3500520 (LED)
• Compatible with most electic low mount winches, up to 10,000 lb capacity
• Optional ARB fog light kit part 6821201 (halogen) or 3500890 (LED)
• Multi Fold Upswept And Tapered Wing Design
• Extensive Under Protection Panels
• Provision for driving lights
• Twin Hi-Lift Jacking Points
• 250 Heavy Grade Wall Tubing
• Durable Steel Construction
• Durable Urethane Buffers
• Black Powder Coat
• Split Pan Design
• OEM Tow Points

This Part Fits:

Unlike most brush guards and bumpers, ARB Bumpers incorporate a fully engineered mounting system which completely replaces the factory bumper. ARBs Deluxe Bumper selection is the most extensive. Loaded with features aimed at making remote area travel safe, no other bumper offers the same degree of vehicle integration, protection or functionality.

• Loom required when installing fog light kit part 3500440 (halogen) or 3500520 (LED) Not required with factory fogs
• Hawse fairlead spacer kit part 3500600 required when fitting a hawse fairlead
• Compatible with most electic low mount winches, up to 12,000 lb capacity
• Optional ARB fog light kit part 6821201 (halogen) or 3500890 (LED)
• Multi Fold Upswept And Tapered Wing Design
• Extensive Under Protection Panels
• Twin Hi-Lift Jacking Points
• Durable Steel Construction
• Durable Urethane Buffers
• For use with IFS models
• Black Powder Coat
• Split Pan Design

This Part Fits:

Unlike most brush guards and bumpers, ARB Bumpers incorporate a fully engineered mounting system which completely replaces the factory bumper. ARBs Deluxe Bumper selection is the most extensive. Loaded with features aimed at making remote area travel safe, no other bumper offers the same degree of vehicle integration, protection or functionality.

• Loom required when installing fog light kit part 3500440 (halogen) or 3500520 (LED) Not required with factory fogs
• Hawse fairlead spacer kit part 3500600 required when fitting a hawse fairlead
• Compatible with most electic low mount winches, up to 12,000 lb capacity
• Optional ARB fog light kit part 6821201 (halogen) or 3500890 (LED)
• Multi Fold Upswept And Tapered Wing Design
• Extensive Under Protection Panels
• 250 Heavy Grade Wall Tubing
• Twin Hi-Lift Jacking Points
• Durable Steel Construction
• Durable Urethane Buffers
• For use with IFS models
• Black Powder Coat
• Split Pan Design

This Part Fits:

Unlike most brush guards and bumpers, ARB Bumpers incorporate a fully engineered mounting system which completely replaces the factory bumper. ARBs Deluxe Bumper selection is the most extensive. Loaded with features aimed at making remote area travel safe, no other bumper offers the same degree of vehicle integration, protection or functionality.

• Hawse fairlead spacer kit part 3500600 required when fitting a hawse fairlead
• Compatible with most electic low mount winches, up to 12,000 lb capacity
• Multi Fold Upswept And Tapered Wing Design
• Extensive Under Protection Panels
• Twin Hi-Lift Jacking Points
• Durable Steel Construction
• Durable Urethane Buffers
• For use with IFS models
• Black Powder Coat
• Split Pan Design

This Part Fits:

Unlike most brush guards and bumpers, ARB Bumpers incorporate a fully engineered mounting system which completely replaces the factory bumper. ARBs Deluxe Bumper selection is the most extensive. Loaded with features aimed at making remote area travel safe, no other bumper offers the same degree of vehicle integration, protection or functionality.

• Hawse fairlead spacer kit part 3500600 required when fitting a hawse fairlead
• Compatible with most electic low mount winches, up to 12,000 lb capacity
• Multi Fold Upswept And Tapered Wing Design
• Extensive Under Protection Panels
• 250 Heavy Grade Wall Tubing
• Twin Hi-Lift Jacking Points
• Durable Steel Construction
• Durable Urethane Buffers
• For use with IFS models
• Black Powder Coat
• Split Pan Design

This Part Fits:

Unlike most brush guards and bumpers, ARB Bumpers incorporate a fully engineered mounting system which completely replaces the factory bumper. ARBs Deluxe Bumper selection is the most extensive. Loaded with features aimed at making remote area travel safe, no other bumper offers the same degree of vehicle integration, protection or functionality.

• Hawse fairlead spacer kit part 3500600 required when fitting a hawse fairlead
• Suits most low mount electric winches, up to 12,000 lb capacity
• Spacer kit part 3500050 may be required to install some winches
• Multi Fold Upswept And Tapered Wing Design
• Extensive Under Protection Panels
• Provisions For ARB Fog Lights
• Provision for driving lights
• Twin Hi-Lift Jacking Points
• 250 Heavy Grade Wall Tubing
• Durable Steel Construction
• Durable Urethane Buffers
• Not airbag compatible
• Black Powder Coat
• Split Pan Design
• Winch compatible
• OEM Tow Points

This Part Fits:

Unlike most brush guards and bumpers, ARB Bumpers incorporate a fully engineered mounting system which completely replaces the factory bumper. ARBs Deluxe Bumper selection is the most extensive. Loaded with features aimed at making remote area travel safe, no other bumper offers the same degree of vehicle integration, protection or functionality.

• Multi Fold Upswept And Tapered Wing Design
• Extensive Under Protection Panels
• Provision for Driving Lights
• Twin Hi-Lift Jacking Points
• Durable Steel Construction
• Durable Urethane Buffers
• Black Powder Coat
• Split Pan Design

This Part Fits:

Unlike most brush guards and bumpers, ARB Bumpers incorporate a fully engineered mounting system which completely replaces the factory bumper. ARBs Deluxe Bumper selection is the most extensive. Loaded with features aimed at making remote area travel safe, no other bumper offers the same degree of vehicle integration, protection or functionality.

• Multi Fold Upswept And Tapered Wing Design
• Extensive Under Protection Panels
• Provision for driving lights
• 250 Heavy Grade Wall Tubing
• Twin Hi-Lift Jacking Points
• Durable Steel Construction
• Durable Urethane Buffers
• Black Powder Coat
• Split Pan Design

This Part Fits:

Unlike most brush guards and bumpers, ARB Bumpers incorporate a fully engineered mounting system which completely replaces the factory bumper. ARBs Deluxe Bumper selection is the most extensive. Loaded with features aimed at making remote area travel safe, no other bumper offers the same degree of vehicle integration, protection or functionality.

• Multi Fold Upswept And Tapered Wing Design
• Extensive Under Protection Panels
• Provisions For ARB Fog Lights
• Twin Hi-Lift Jacking Points
• Durable Steel Construction
• Durable Urethane Buffers
• Not airbag compatible
• Not winch compatible
• Black Powder Coat
• Split Pan Design
• OEM Tow Points
• Bull Bar

This Part Fits:

Constructed from rugged 1/4” and 3/8” steel plate and 2” diameter steel tubing, Terra Guard’s bull bar is built to withstand the toughest conditions. Integrated recovery shackle mounts for 3/4" shackles offer convenient, secure recovery solutions.  Light tabs support multiple 4-inch, 6-inch or 9-inch diameter lights, making it ideal for nighttime adventures. Finished in a fine-textured black powder coat, it delivers a clean look with exceptional durability—all with no-drill, direct bolt-on installation. Built from robust 1/4” and 3/8” steel plate and 2” diameter steel tubing, providing unmatched strength and durability.  Integrated recovery shackle mounts are engineered to accommodate standard 3/4” D-ring shackles, providing secure and reliable recovery points for off-road and utility applications. Convenient light tabs accommodate multiple 4”, 6”, or 9” diameter lights, or custom light configurations to ensure exceptional visibility on nighttime adventures (lights not included). Coated in a fine-textured black powder for a rugged, finished look that stands up to the elements.

• Allows Mounting for Multiple 4”, 6” or 9” Light Pods
• Installation requires no drilling or cutting
• Textured Black Powder Coated Finish
• Heavy-gauge steel construction
• Accepts 3/4" D-Ring Shackles
• Proudly Made in the USA

This Part Fits:

Constructed from rugged 3/16” and 1/4” steel plate and Ø2”x .059” steel tubing, Terra Guard’s bull bar is built to withstand the toughest conditions. Integrated recovery shackle mounts offer convenient, secure recovery solutions, while light tabs support up to four 6-inch diameter lights and a 20” light bar, making it ideal for nighttime adventures. Finished in a fine-textured black powder coat, it delivers a clean look with exceptional durability—all with no-drill, direct bolt-on installation. Built from robust 3/16” and 1/4” steel plate and Ø2”x .059” steel tubing, providing unmatched strength and durability. Designed for easy connection, these mounts allow for quick and secure recoveries (shackles not included). Convenient light tabs accommodate up to four 6-inch diameter lights, a 20” light bar, or custom light configurations to ensure exceptional visibility on nighttime adventures (lights not included). Coated in a fine-textured black powder for a rugged, finished look that stands up to the elements.

• Allows Mounting for Multiple 6” Light Pods and 20” Light Bar
• Installation requires no drilling or cutting
• Textured Black Powder Coated Finish
• Integrated Recovery Shackle Mounts
• Heavy-gauge steel construction
• Proudly Made in the USA

This Part Fits:

Enhance your Subaru Outback's capabilities with the Terra Guard Trail Bumper! Crafted from robust tubular steel, this heavy-duty front bumper guard ensures maximum protection and off-road utility. Integrated recovery shackle mounts offer added safety for any off-road adventure. Illuminate your path with up to six 6-inch diameter lights. No need for complicated installations; this bumper fits seamlessly without drilling or cutting. Embrace the outdoors with Terra Guard! Crafted from heavy-gauge tubular steel, 1-1/2 inch diameter x 1/8 inch wall this robust bumper is built to withstand the toughest challenges on and off the road. Features integrated recovery shackle mounts, allowing you to easily connect shackles for quick and secure recoveries (shackles not included). Equipped with convenient light tabs, the Terra Guard Bumper can hold up to four 6-inch diameter lights, ensuring exceptional visibility during nighttime adventures (lights not included). Finished in a sleek black powder coating, the Terra Guard Bumper not only ensures long-lasting durability but also adds a rugged look to your vehicle's appearance.

• Light tabs for up to six 6-inch diameter lights
• Installation requires no drilling or cutting
• Black powder coated finish for durability
• Integrated recovery shackle mounts
• Heavy-Gauge tubular steel bumper
• Proudly Made in the USA

This Part Fits: