The HoneyBadger front bumper is known for its sharp angles and rugged style. This bumper is available with, or without a top hoop. The top of the bumper has a light mount for a 30- in. radius LED light bar, which is partially protected by the top hoop. An additional 20- in. LED light bar can be mounted behind the central panel. Single 10 in. SR lights can be mounted behind each of the side panels. The HoneyBadger Raptor front bumper was designed to follow the body lines of the truck perfectly, while bringing a more aggressive edge to its stance. The steel is finished in a hammer black powder coat, while the aluminum panels are finished in a satin black powder coat. There are sensor holes to retain the OEM parking sensors, and sensor hole plugs are supplied if your Raptor does not have front sensors. The OEM tow hooks fit perfectly underneath the bumper.

• Mount For 30 Inch Radius Light Bar In Top Hoop
• Mounts For 10 in. Single Row Lights On Sides
• Mount For 20 Inch Light Bar In Center
• Satin Black Powder Coat Panel Finish
• Hammer Black Powder Coat Finish
• Parking Sensor Cutouts

This Part Fits:

The HoneyBadger front bumper is known for its sharp angles and rugged style. This bumper is available with, or without a top hoop. The top of the bumper has a light mount for a 30- in. radius LED light bar. An additional 20- in. LED light bar can be mounted behind the central panel. Single 10 in. SR lights can be mounted behind each of the side panels.The HoneyBadger Raptor front bumper was designed to follow the body lines of the truck perfectly, while bringing a more aggressive edge to its stance. The steel is finished in a hammer black powder coat, while the aluminum panels are finished in a satin black powder coat. There are sensor holes to retain the OEM parking sensors, and sensor hole plugs are supplied if your Raptor does not have front sensors. The OEM tow hooks fit perfectly underneath the bumper.

• Mount For 30 Inch Radius Light Bar In Top Hoop
• Mounts For 10 in. Single Row Lights On Sides
• Mount For 20 Inch Light Bar In Center
• Satin Black Powder Coat Panel Finish
• Hammer Black Powder Coat Finish
• Parking Sensor Cutouts

This Part Fits:

The Rock Fighter Front Bumper features a low-profile fitment, steel construction, and satin black accent panels. Our bumper includes a 3/16-inch aluminum skid plate with integrated air vents on the plate to ensure there's proper airflow to the intercooler. Our design retains the OEM parking sensors and intercooler. Add-on our Adaptive Cruise Control Relocation Bracket to maintain full use of your ACC capabilities. Additionally, the Shutter Motor Relocation Kit is necessary on 2024+ model years to ensure there are no check engine lights when removing lower grille shutters for bumper installation. The integrated light mount gives you the option of attaching a 20-inch dual row radius LED light bar or six cube lights in the center of the bumper. Finished in a two stage hammer black powder coat your front bumper will be protected from scratches. Made in America.

• Optional Adaptive Cruise Control Relocation Bracket To Retain ACC Functions
• Optional Shutter Motor Relocation Kit Required For 2024 - 2025 Model Years
• Center Mount For 20 in. Dual Row Radius Led Light Bar Or Six Cube Lights
• Features 3/16 in. Aluminum Skid Plate With Air Vents
• Durable 2-Stage Hammer Black Powder Coat Finish
• Satin Black Powder Coat Aluminum Accent Panels
• Constructed From High-Quality Steel
• Retains OEM Parking Sensors
• Fully Bolt-On Installation
• Retains OEM Intercooler
• Low-Profile Fitment
• Made In The USA

This Part Fits:

The Stealth Fighter has been our most popular line of bumpers, and for good reason. It is one of our tightest fitting bumpers and is synonymous with the Raptor in the off-road community. This was designed to closely follow the Raptor's body lines, and provides better ground clearance and approach angle than the OEM bumper. The front of the bumper sticks out only 1/2-inch further than the OEM bumper in order to fit LED lights within. The center light mount can accommodate either a 40-inch radius LED light bar, or up to 10 LED cube lights. There are 2 side mounts for Rigid 10-inch SR LED light bars on either side of the bumper for additional lighting. These mounts sit behind satin black aluminum panels with vented slots, so if you decide to not mount any side lights there are no empty holes in the bumper.

• Universal Plate/10 Dually
• Panel Color: Satin Black
• Bumper Color
• Hammer Black
• Satin Black
• 10 in. Led

This Part Fits:

The ADD Offroad Bomber Front Bumper for the Ford Raptor & Raptor R has been the king of aftermarket Raptor bumpers for years. We've brought the Bomber to the 3rd-gen Raptor, keeping it true to it's low-profile, aggressive styling. Constructed from plate steel and lightweight aluminum panels, the Bomber provides protection to your truck's front end without compromising clearance. The 3/16-inch aluminum skid plate helps to ensure that the Bomber is lighter than the OEM bumper. The Bomber Raptor Front Bumper is offered with three lighting options: 4 Rigid 360 6-inch light mounts, 3 Baja Designs LP6 light mounts, or two 20-inch light bar mounts. Additionally, there are cube light mounts on each wing of the bumper to provide supplemental lighting options. The Bomber retains both the OEM tow hooks as well as the OEM parking sensors. As always, this bumper is fully bolt-on and Made in America.

• Mounts For 4 Rigid 360 6 in. Round Lights
• Mounts for 4 RIGID 360 6" round lights
• Satin Black Powder Coat Panel Finish
• Hammer Black Powder Coat Finish
• Mounts For Cube Lights On Sides
• Parking Sensor Cutouts

This Part Fits:

The ADD Offroad Bomber Front Bumper for the Ford Raptor & Raptor R has been the king of aftermarket Raptor bumpers for years. We've brought the Bomber to the 3rd-gen Raptor, keeping it true to it's low-profile, aggressive styling. Constructed from plate steel and lightweight aluminum panels, the Bomber provides protection to your truck's front end without compromising clearance. The 3/16-inch aluminum skid plate helps to ensure that the Bomber is lighter than the OEM bumper. The Bomber Raptor Front Bumper is offered with three lighting options: 4 Rigid 360 6-inch light mounts, 3 Baja Designs LP6 light mounts, or two 20-inch light bar mounts. Additionally, there are cube light mounts on each wing of the bumper to provide supplemental lighting options. The Bomber retains both the OEM tow hooks as well as the OEM parking sensors. As always, this bumper is fully bolt-on and Made in America.

• Mounts For 3 Baja Designs Lp6 Round Lights
• Satin Black Powder Coat Panel Finish
• Hammer Black Powder Coat Finish
• Mounts For Cube Lights On Sides
• Parking Sensor Cutouts

This Part Fits:

The Stealth Fighter front bumper for the Ford F-150 is one of our tightest fitting and most aggressive looking bumpers on the market. A modern radius plate design allows the Stealth Fighter to keep a tight fit around the front of your truck to match the factory design, while giving you the added protection of a steel plated bumper. The center of the bumper has a universal light mount system that allows you to mount up to 10 cube lights or a 40" radius or straight LED, or anything in between to give your F-150 the additional lighting setup that you need. Additional mounts for RIGID 10" SR LEDs behind the side panels give your truck even more lighting options.

• Direct Fit/No Cutting Or Welding Required
• Laser Cut Skid Plates/Tabs And Plates
• .120 in. Wall Steel Tube Construction
• Hammer Black powder coat finish
• Stainless Steel Hardware
• Fully Boxed Frame Horns

This Part Fits:

Our Black Label Front Bumper was designed to complement the factory style, and features unrivaled fitment and an easy installation. The Black Label line is the most affordable series we've ever released. At the center of the bumper is a mount for a 20-inch LED light bar for supplemental lighting on the trail or the worksite. The OEM parking sensors retain full functionality with integrated mounting points. The design retains full functionality of the adaptive cruise control feature without the need for a relocation bracket. The Black Label Front Bumper is finished in a hammer black powder coat, while the accent panels are finished in satin black. As always, this is fully bolt-on and Made in America.

• Durable 2-Stage Hammer Black Powder Coat
• Retains Adaptive Cruise Control
• Mount For 20 in. LED Light Bar
• Compatible With Super Cruise
• Retains OEM Parking Sensors
• Modern Plate Steel Design
• Satin Black Accent Panels
• Made In The USA
• 3 Piece Design

This Part Fits:

Combining aesthetics with functionality, the ADD PRO Bolt-On Ford Raptor front bumper doesnt sacrifice the look of your truck for approach angle. Our ADD PRO bumper gives your truck maximum approach angle for your off-road adventures without relocating your intercooler or cutting your frame. The ADD PRO front bumper truly contours the body lines of the Raptor without the need of a plastic valence. Built with .120 in. wall steel tubing for strength and durability and an aluminum skid plate for protection. Mounting options for lights underneath the main tube to keep them tucked away allow for up to 6 cube lights or a 20 in. radius LED bar.

• Universal Mounts Up To 6 Cube Lights Or 20 in. Radius Light Bar
• Satin Black Powder Coat Panel Finish
• Hammer Black Powder Coat Finish
• Hammer black powder coat

This Part Fits:

The Phantom front bumper boasts a low-profile and takes inspiration from prerunner bumpers. It features a lightweight 3/16-inch aluminum skid plate that delivers comprehensive protection without unnecessary bulk. The skid plate incorporates vented cutouts to ensure proper intercooler airflow, catering to both style and functionality. The Phantom provides lighting options, including a central 20-inch radius light bar mount and 10-inch SR light mounts positioned behind each side panel. The bumper includes sensor mounts to maintain the full functionality of your parking sensors. Installation requires an Adaptive Cruise Control relocation bracket. As always, this is fully bolt-on and Made in America.

• Retains Adaptive Cruise Control Function With Optional Acc Relocation Bracket
• Satin Black Powder Coat Aluminum Accent Panels
• Full-Size Aluminum Skid Plate With Air Vents
• Fits A 20 in. Radius LED Light Bar
• Fits Two 10 in. Sr LED Light Bars
• Hammer Black Powder Coat Steel
• Retains OEM Parking Sensors
• Plate Steel Construction
• Retains OEM Intercooler
• Low-Profile Fitment
• Knifes Edge Design
• Made In The USA

This Part Fits:

Combining aesthetics with functionality, the ADD PRO V2 frame cut Ford Raptor front bumper doesn't sacrifice the look of your truck for approach angle. Our ADD PRO V2 bumper is the a true high quality frame cut bumper for the Ford Raptor giving your truck maximum approach angle for your off-road adventures. The ADD PRO V2 front bumper truly contours the body lines of the Raptor without the need of a plastic valence. Built with .120 in. wall steel tubing for strength and durability and an aluminum skid plate for protection.

• Satin Black Powder Coat Panel Finish
• Hammer Black Powder Coat Finish

This Part Fits:

Combining aesthetics with functionality, the ADD PRO frame cut Ford Raptor front bumper doesn't sacrifice the look of your truck for approach angle. The ADD PRO front bumper contours the body lines of the Raptor. Built with .120 in." wall steel tubing for strength and durability and an aluminum skid plate for protection. Mounting options for lights underneath the main tube to keep them tucked away allow for up to 6 cube lights or a 20 in. radius LED bar.

• Universal Mount That Fits Up To 20 in. Light or 6 Cubes
• Hammer Black Powder Coat Finish
• Satin Black Powder Coat Panels

This Part Fits:

The aggressive styling of the ADD HoneyBadger bumper truly transforms the front of your truck. Multiple lighting options include a radius 40" curved LED bar up top, straight 20" LED bar in the center, and one cube light mount behind each side panel. Added utility comes in the form of standard clevis mounts that accept 3/4" D-Rings as well as an optional winch mount. As always, this product is made in America.

• Made To Mold The Front Of Your Truck
• 3/16 in. Mild Steel Construction
• Top Mount: 40" RDS Light Bar
• Multiple Lighting Options
• Side Panel Inserts
• Winch Options
• D Ring Mounts

This Part Fits: