Fits 1987-1995 Jeep Wrangler YJ models including Base, Sahara, Renegade, and Sport. This Energy Suspension Hyper-Flex polyurethane front sway bar bushing set (MPN 2.5107R) is designed to replace soft, worn-out factory rubber to restore and enhance your Jeep's handling stability.

OEM rubber bushings are prone to cracking and distortion, which leads to slop in the steering and reduced sway bar effectiveness. These 1-1/8 inch red polyurethane bushings provide a more rigid connection, allowing the sway bar system to operate at 100% efficiency for flatter cornering and improved driver feedback. The Hyper-Flex material is resistant to undercar contaminants like oil and road salt, ensuring a significantly longer service life than rubber.

• Material: Performance-grade Hyper-Flex Polyurethane
• Color: Red
• Sway Bar Diameter: 1-1/8 inch (28.5mm)
• Components Included: Front sway bar bushings and end link bushings
• MPN: 2.5107R

Fits 1976-1986 Jeep CJ5 and CJ7.

Replace soft, degraded factory rubber with Energy Suspension Hyper-Flex polyurethane stabilizer bar bushings to restore steering precision and reduce body roll. These performance bushings are designed to keep the sway bar system operating at peak efficiency, preventing the deflection common with OEM rubber components. The polyurethane construction offers superior resistance to road salt, oils, and grease, ensuring a significantly longer service life than standard replacements.

• Manufactured from proprietary Hyper-Flex polyurethane for maximum durability and response.
• Improves handling characteristics by maintaining better control over the sway bar.
• Resistant to atmospheric conditions and automotive chemicals that rot traditional rubber.
• Includes high-quality replacement bushings for a direct-fit installation.
• Color: Red
• Manufacturer Part Number: 2.5101R

Fits 1976-1986 Jeep CJ5 and CJ7 across all trims including Base, Renegade, Laredo, Limited, and Golden Eagle.

Energy Suspension Hyper-Flex polyurethane stabilizer bar bushings provide a significant handling upgrade for your Jeep CJ. Unlike factory rubber bushings that crack, rot, and distort under load, these high-density polyurethane components maintain their shape. This ensures your sway bar operates at peak efficiency, reducing body roll and improving steering response during both street driving and off-road use.

• Manufactured from proprietary Hyper-Flex polyurethane for maximum durability and performance
• Highly resistant to vehicle fluids, road salt, and ozone degradation that destroys rubber
• Direct replacement for soft, worn-out OEM stabilizer bushings
• Maintains alignment and reduces deflection for more predictable handling
• Manufacturer Part Number: 2.5101G

Vehicle Fitment

Fits 1997-2006 Jeep Wrangler and Wrangler Unlimited models including SE, Sport, Sahara, Rubicon, X, and 65th Anniversary Edition.

The Energy Suspension Hyper-Flex 1in Body Lift Kit (MPN: 2.4108R) is engineered to address the common failures of factory rubber mounts. Original rubber mounts are prone to cracking, crushing, and distorting over time, which compromises the alignment between the car body and the chassis. While aluminum mounts are an alternative, they often prove too harsh for street use. These red Hyper-Flex polyurethane mounts provide a superior middle ground, offering the ruggedness required for demanding off-road conditions while maintaining a smooth, comfortable ride.

• Precision Lift: Provides a 1-inch body lift to increase clearance for larger tires and off-road obstacles.
• Hyper-Flex Polyurethane: Formulated for maximum durability and resistance to road contaminants, salt, and weathering.
• Reinforced Construction: Includes strong zinc-plated steel rings molded into the polyurethane for added structural integrity where the application requires it.
• Restores Alignment: Replaces worn or missing original mounts to restore factory ride height and body alignment.

This kit is a complete solution for Jeep TJ and LJ owners seeking to improve their vehicle's durability and stance without the harshness of solid metal mounts.

Fits 1997-2006 Jeep Wrangler (Sahara, Sport, SE, Rubicon, Unlimited, X).

The Energy Suspension 1-inch body lift kit replaces original, distorted rubber mounts to restore proper body-to-frame alignment. While factory rubber mounts often crack and crush over time, and solid aluminum mounts are typically too harsh for street use, Energy Suspension uses their proprietary Hyper-Flex polyurethane. This material provides the necessary durability for demanding trails while maintaining a smooth ride for daily driving.

Many components in this kit feature a strong, zinc-plated steel ring molded into the polyurethane for maximum durability and structural integrity. This kit is designed to provide additional tire clearance and restore ride height lost to sagging factory bushings.

• Gain 1 inch of body lift for increased tire clearance
• Manufactured from Hyper-Flex polyurethane for long-term durability
• Resistant to road salt, oils, and automotive fluids
• Zinc-plated steel rings molded into mounts for added strength
• Includes all necessary hardware for installation
• Manufacturer Part Number: 2.4108G

Fits 1997-2006 Jeep Wrangler models including SE, Sport, Sahara, Rubicon, Unlimited, and X.

Replace worn, distorted, or crushed factory rubber mounts with the Energy Suspension Hyper-Flex body mount set to restore proper body-to-frame alignment and ride height. Original equipment rubber mounts are prone to cracking and compression over time, leading to panel misalignment and increased cabin noise. Unlike solid aluminum mounts which can be too harsh for street use, these polyurethane mounts offer a balance of durability and ride quality.

Engineered from proprietary Hyper-Flex polyurethane, this set is designed to withstand the demands of off-road use while remaining soft enough for a comfortable daily drive. Most bushings in this set feature zinc-plated steel rings molded directly into the polyurethane for increased structural integrity and a secure fit against factory mounting points.

• Manufacturer Part Number: 2.4107R
• Material: Hyper-Flex Polyurethane
• Finish: Red
• Restores original ride height and cab-to-bed alignment
• Includes zinc-plated steel rings for maximum durability
• Resistant to vehicle fluids, road salt, and environmental degradation

Fits 1997-2006 Jeep Wrangler (SE, Sport, Sahara, Rubicon, Unlimited, X, and 65th Anniversary Edition).

Over time, factory rubber body mounts become soft, distorted, and prone to cracking, which leads to poor body-to-chassis alignment and a degraded ride. The Energy Suspension Hyper-Flex polyurethane body mount set is engineered to solve these issues. These mounts provide the necessary rigidity to maintain proper alignment between the cab and chassis while remaining compliant enough for a comfortable street ride—offering a superior alternative to both failing rubber and harsh solid aluminum mounts.

Constructed from a proprietary polyurethane formula, these bushings are resistant to road grime, oils, and environmental breakdown. Many applications in this set feature a zinc-plated steel ring molded directly into the bushing for enhanced durability and structural integrity under heavy loads. This kit is a direct replacement for OE mounts, designed to restore ride height and gain long-term durability for both daily driving and off-road use.

• Replaces worn, distorted original rubber mounts to restore body alignment
• Made from proprietary Hyper-Flex polyurethane for maximum durability
• Includes zinc-plated steel rings where required for added strength
• Resistant to automotive fluids and road salt
• Manufacturer Part Number: 2.4107G
• Finish: Black

Fits 1976-1979 Jeep CJ5 and CJ7 models including Base, Golden Eagle, and Renegade trims.

Restore proper body-to-frame alignment and factory ride height with the Energy Suspension Hyper-Flex Body Mount Set. Original rubber mounts are prone to cracking, distorting, and crushing over time, which leads to body misalignment and increased cabin noise. While solid aluminum mounts provide durability, they are often too harsh for street use. These polyurethane mounts offer the ideal middle ground: they are rugged enough for demanding off-road trails while remaining soft enough to maintain a smooth ride.

• Manufactured from proprietary Hyper-Flex polyurethane for superior longevity compared to OE rubber
• Resistant to road grime, oils, and environmental degredation
• Restores cab-to-bed and body-to-frame alignment
• Includes zinc-plated steel rings molded into the mounts for reinforced durability where required
• Engineered to provide the strength of metal with the vibration-dampening of rubber
• Manufacturer Part Number: 2.4103G

Fits 1980-1986 Jeep CJ5 and CJ7 models. These Energy Suspension Hyper-Flex body mounts are designed to replace distorted, worn-out factory rubber mounts to restore and maintain proper body-to-frame alignment.

Original rubber mounts are susceptible to cracking, crushing, and even falling off over time due to exposure and load. While solid aluminum mounts provide rigidity, they are often too harsh for street use and can lead to chassis fatigue. Energy’s Hyper-Flex™ polyurethane construction offers the ideal balance: rugged enough for demanding trails and tracks, yet compliant enough to provide a smooth ride for daily driving. Many kits include zinc-plated steel rings molded into the bushings for maximum durability and structural integrity.

• Replaces soft, crushed factory rubber to restore correct ride height
• Maintains critical cab-to-bed and body-to-frame alignment
• Constructed from proprietary Hyper-Flex™ polyurethane for long-term durability
• Resistant to road oils, salt, and environmental degradation
• Includes zinc-plated steel hardware where application specific
• Manufacturer Part Number: 2.4102G

Fits 1955-1973 Jeep and Willys CJ-5 models. This Energy Suspension Hyper-Flex body mount set is engineered to replace worn, distorted factory rubber mounts that lead to body-to-frame misalignment. Unlike soft OEM rubber that eventually cracks and crushes or rigid aluminum mounts that transmit excessive vibration to the cabin, these polyurethane mounts provide the ideal balance of durability and ride quality.

Constructed from Energy Suspension's proprietary Hyper-Flex polyurethane, these mounts are resistant to vehicle fluids and road grime that typically degrade rubber. They are designed to restore proper ride height and ensure lasting alignment between the body and chassis, whether on the street or the trail. Many applications in this set include molded-in zinc-plated steel rings for increased structural integrity and durability.

• Replaces factory rubber mounts to restore body and cab alignment
• Manufactured from durable Hyper-Flex polyurethane
• Provides a smooth ride without the harshness of aluminum mounts
• Resistant to oils, grease, and environmental contaminants
• Includes zinc-plated steel rings where required for added strength
• Manufacturer Part Number: 2.4101R

Fits 1955-1973 Jeep CJ5 and Willys CJ-5.

Over time, factory rubber body mounts deteriorate, crack, and compress, leading to poor body-to-frame alignment and increased cabin noise. This Energy Suspension Hyper-Flex body mount set replaces those soft original equipment (OE) bushings with high-performance polyurethane components designed to withstand the rigors of off-road use and daily driving.

Energy’s Hyper-Flex polyurethane formula provides the necessary rigidity to maintain proper ride height and alignment while absorbing enough vibration to keep the ride comfortable. These mounts are significantly more durable than rubber and won't corrode like aluminum alternatives. This kit is an essential upgrade when restoring your classic Jeep or preparing it for demanding terrain, ensuring your cab remains properly aligned with the frame.

• Material: Specially formulated Hyper-Flex polyurethane
• Finish: Black
• Primary function: Restores and maintains proper body-to-frame alignment
• Durability: Zinc-plated steel rings molded into mounts where application requires
• Replaces soft, distorted, or crushed factory rubber mounts
• Manufacturer Part Number: 2.4101G

Fits all 2007-2017 Jeep Wrangler JK and Wrangler Unlimited models (Rubicon, Sahara, Sport, X, and special editions).

Replace soft, high-deflection factory rubber with Energy Suspension's Hyper-Flex polyurethane bushings to regain steering precision and maintain consistent suspension geometry. These axle-side bushings are specifically engineered for the front control arms, providing a full-floating, non-binding design that allows the suspension to cycle smoothly without the resistance found in bonded rubber units. This ensures better alignment retention under the stress of off-road articulation or street driving.

Constructed from a proprietary polyurethane formula, these bushings are resistant to oil, road salt, and ozone, meaning they will not rot or crack like original equipment. This kit is designed to fit directly into the remaining stock control arm housings, making it a targeted solution for common front-end wandering and axle wrap issues.

• Position: Front Control Arm (Axle Only Position)
• Material: Hyper-Flex Polyurethane
• Color: Red
• Design: Full-floating and non-binding
• Manufacturer Part Number: 2.3113R
• Compatibility: Fits factory control arm housings

Fits 2007-2017 Jeep Wrangler and Wrangler Unlimited JK (2-Door and 4-Door models).

Standard rubber bushings are designed for general comfort but often fail under the stress of off-road articulation or oversized tires, leading to sloppy handling and alignment shifts. Energy Suspension Front Control Arm Bushings (Axle Position Only) are engineered from proprietary Hyper-Flex polyurethane to provide a much more stable pivot point. These bushings maintain consistent suspension geometry under extreme conditions, whether you are navigating technical trails or highway driving.

This kit features a full-floating design for smooth, non-binding operation, ensuring your suspension moves freely without the resistance found in worn OE components. The polyurethane material is resistant to oils, road salt, and ozone, significantly outlasting factory rubber.

• Material: Hyper-Flex Performance Polyurethane
• Position: Front Control Arm (Axle Mount Side)
• Color: Black
• Part Number: 2.3113G
• Design: Full Floating and Non-Binding
• Function: Maintains proper caster and camber alignment while improving steering response

Fits 1987-1995 Jeep Wrangler (Base, Islander, Laredo, Renegade, Rio Grande, S, Sahara, SE, and Sport).

Replace worn-out rubber bushings with the Energy Suspension Hyper-Flex polyurethane frame shackle bushing set. Standard rubber bushings often deteriorate over time due to road salt, oil, and ozone, leading to excessive suspension deflection and poor handling. These polyurethane replacements are engineered to withstand the elements and maintain proper suspension alignment, providing a significant increase in durability and control for your Jeep.

The proprietary Hyper-Flex material is specifically formulated to provide the right balance of firmness and flexibility, ensuring your leaf spring shackles can move correctly without the slop associated with degraded factory components. This kit is an essential upgrade for any YJ restoration or for drivers looking to restore steering response and suspension stability.

• Replaces soft or rotted OE rubber shackle bushings
• Constructed from premium Hyper-Flex polyurethane for long-term durability
• Reduces suspension deflection and improves vehicle control
• Resistant to road contaminants and oils
• Manufacturer Part Number: 2.2120R

Fits 1987-1995 Jeep Wrangler (Base, Islander, Laredo, Renegade, Rio Grande, S, Sahara, SE, and Sport).

Replace worn, soft factory rubber bushings with the Energy Suspension Hyper-Flex polyurethane frame shackle bushing set. Over time, original equipment rubber bushings degrade from exposure to the elements and road chemicals, leading to excessive suspension play, steering wander, and poor handling. This set provides a more durable and stable pivot point for your Jeep's leaf spring shackles, ensuring the suspension functions properly under load.

• Manufactured from proprietary Hyper-Flex polyurethane for maximum durability and performance
• Resistant to oils, road salt, and ozone for a longer service life than OEM rubber
• Helps maintain proper suspension alignment and improves chassis feedback
• Direct replacement for factory frame-side shackle bushings
• Finished in black for a clean, understated appearance
• Manufacturer Part Number: 2.2120G

Fits 1987-1995 Jeep Wrangler models including Base, Islander, Laredo, Renegade, Rio Grande, S, Sahara, SE, and Sport.

Restore steering precision and suspension stability to your YJ with the Energy Suspension 2.2119G Hyper-Flex spring bushing set. Over time, factory rubber bushings dry out, crack, and lose their shape, resulting in excessive deflection that compromises alignment and handling. These performance polyurethane bushings are engineered to provide the necessary rigidity to keep your leaf springs aligned while remaining resilient enough for trail articulation.

The proprietary Hyper-Flex polyurethane material is significantly more durable than OE rubber, designed to last 5 to 10 times longer while resisting degradation from oil, road salt, and environmental contaminants. By maintaining consistent suspension geometry, these bushings provide better control during hard braking, cornering, and acceleration, effectively eliminating the "sloppy" feeling of a worn suspension.

• Replaces soft, worn factory rubber bushings with high-performance polyurethane
• Maintains proper leaf spring alignment for predictable handling and control
• Hyper-Flex material resists chemical breakdown and environmental rot
• Engineered for a direct fit on 1987-1995 Jeep Wrangler (YJ) models
• Manufacturer Part Number: 2.2119G

Fits 1976-1986 Jeep CJ5, CJ7, and Scrambler.

Upgrade your vehicle's leaf spring suspension with the Energy Suspension Hyper-Flex Aftermarket Shackle Set. Factory rubber bushings are prone to deterioration from road contaminants, UV exposure, and mechanical stress, which leads to suspension play and unpredictable handling. This set replaces soft OE components with high-performance polyurethane for increased durability and more precise chassis response.

Formulated from Energy Suspension's proprietary Hyper-Flex polyurethane, these components are engineered to maintain their physical properties under the demands of off-road articulation and heavy use. This kit (MPN 2.2118G) provides the necessary structural rigidity to keep your shackles properly aligned, ensuring consistent spring performance and a more stable ride.

• Material: Hyper-Flex Polyurethane
• Color: Black
• Direct replacement for worn or rotted factory shackle bushings
• Resistant to oil, grease, road grime, and ozone
• Maintains proper suspension geometry and spring control
• Manufacturer Part Number: 2.2118G

Fits 1987-1995 Jeep Wrangler (Base, Islander, Laredo, Renegade, Rio Grande, S, Sahara, SE, and Sport).

Replace worn or deteriorated factory leaf spring bushings with Energy Suspension Hyper-Flex polyurethane frame shackle bushings. Original equipment rubber bushings are susceptible to rot and compression set, leading to sloppy handling and poor suspension geometry. These polyurethane replacements are engineered to maintain their shape and provide more consistent suspension articulation, whether you are on the trail or the highway.

• Manufactured from proprietary Hyper-Flex polyurethane for maximum durability
• Resistant to vehicle fluids, road salt, and environmental contaminants
• Improves suspension stability and shackle movement control
• Direct replacement for factory frame-side shackle bushings
• Manufacturer Part Number: 2.2110G
• Color: Black finish

Fits select 1984-1998 Jeep Cherokee, Comanche, Wagoneer, and Grand Wagoneer models. These Energy Suspension leaf spring bushings are designed to replace factory rubber components that often soften and perish under heavy use or environmental exposure.

Constructed from Energy Suspension’s proprietary Hyper-Flex polyurethane, these bushings provide a more stable platform for the suspension to operate. By reducing deflection, they help maintain consistent alignment and suspension geometry during cornering, braking, and acceleration. This upgrade results in improved handling, better control over uneven terrain, and significantly increased service life compared to standard OE rubber.

• Manufacturer Part Number: 2.2109G
• Material: Hyper-Flex Polyurethane
• Color: Black
• Increased durability; lasts 5 to 10 times longer than conventional rubber
• Maintains proper suspension alignment under load
• Resistant to road oils, salts, and chemicals

Fits 1987-1995 Jeep Wrangler models including Base, Islander, Laredo, Renegade, Rio Grande, S, Sahara, SE, and Sport.

Upgrade your vehicle's handling and suspension stability with Energy Suspension Hyper-Flex spring and shackle bushings. Factory rubber bushings are prone to rot and excessive deflection, leading to vague steering and suspension bind. These red polyurethane replacements are engineered to maintain proper alignment and control during hard cornering, standing starts, and heavy braking, offering a significant performance improvement over stock components.

• Manufactured from proprietary Hyper-Flex polyurethane for maximum durability
• Designed to outlast conventional rubber components by 5 to 10 times
• Improves chassis control and suspension geometry under load
• High resistance to oils, road salt, and environmental contaminants
• Complete set for spring and shackle mounting points
• Manufacturer Part Number: 2.2107R
• Finish: Red

Vehicle Fitment

Fits 1987-1995 Jeep Wrangler (YJ) including Base, Sahara, Sport, and Renegade models.

Restore the handling and suspension stability of your leaf-spring Jeep with the Energy Suspension Hyper-Flex Front and Rear Spring and Shackle Bushing Set. Over time, factory rubber bushings dry rot and crack, leading to "death wobble," sloppy steering, and imprecise axle tracking. This kit replaces those soft, worn-out components with high-durometer polyurethane for increased durability and more consistent suspension geometry during cornering, braking, and off-road articulation.

The Hyper-Flex polyurethane construction is engineered to withstand oil, road salt, and ozone, lasting significantly longer than standard OE rubber. Designed for a direct fit on the 1987-1995 Wrangler YJ chassis, these bushings provide a firmer ride and improved feedback by minimizing unwanted leaf spring deflection under load.

• Material: Proprietary Hyper-Flex Polyurethane
• Color: Black
• Placement: Front and rear leaf spring eyes and shackle mounts
• Manufacturer Part Number: 2.2107G
• Performance: Maintains alignment and resists chemical degradation better than rubber

Energy Suspension continues to be the World leader in performance polyurethane suspension technology. Dedication to manufacturing and developing superior products has established Energy Suspension as the most asked-for name in performance polyurethane components today. The complex and diverse nature of Energy's proprietary Hyper-Flex(TM) material requires constant attention to developing the optimum polyurethane formulas. This devotion has produced the quality components that our customers continue to demand. Providing problem-solving solutions with applications for the most popular vehicles, paired with our Limited warranty and superb customer support, Energy Suspension is your first quality choice in performance polyurethane suspension components.

• Adds Dramatic Amount Of Performance/Durability
• Allows The Suspension To Function Properly
• Made Of Superior Hyper-Flex Material
• Made From HYPER-Flex Polyurethane
• Helps Vehicle Be In Control

This Part Fits:

Fits 1976-1986 Jeep CJ5, CJ7, and Scrambler.

Restore steering precision and suspension stability with the Energy Suspension Hyper-Flex Front Leaf Spring Bushing Set. Factory rubber bushings are susceptible to rot, road salt, and oils, which often leads to excessive deflection and front axle "walk." These high-performance polyurethane replacements provide the necessary firmness to maintain proper spring alignment and suspension geometry under load.

Constructed from Energy Suspension’s proprietary Hyper-Flex polyurethane, these bushings are engineered to outperform and outlast standard rubber. Unlike rubber, they do not compress or distort over time, ensuring your Jeep handles predictably whether on the highway or technical trails. This kit is essential for correcting the vague steering feel often found in classic CJ-series vehicles.

• Direct replacement for soft, worn-out factory rubber front leaf spring bushings
• Manufactured from high-grade Hyper-Flex polyurethane for maximum durability
• Resistant to vehicle fluids, road grime, and ozone degradation
• Improves handling and maintains alignment accuracy
• Color: Black
• Manufacturer Part Number: 2.2105G

Fits 1976-1986 Jeep CJ5 and CJ7 across all trim levels including Base, Golden Eagle, Golden Hawk, Laredo, Limited, and Renegade.

Restore handling precision and eliminate the sloppy feel of worn factory leaf spring bushings with the Energy Suspension Hyper-Flex rear spring bushing set. Original equipment rubber bushings are prone to drying out and cracking, leading to excessive spring deflection and compromised alignment. These performance polyurethane replacements are engineered to maintain suspension geometry under load, providing better control during cornering, hard braking, and off-road articulation.

• Proprietary Hyper-Flex polyurethane construction lasts 5-10 times longer than conventional rubber.
• Improves vehicle control and stability by reducing unwanted movement in the leaf spring mounting points.
• Resistant to road salt, oils, and environmental contaminants that cause standard rubber to rot.
• Direct fitment for factory rear leaf spring positions.
• Manufacturer Part Number: 2.2103G

Fits 1976-1986 Jeep CJ5 and CJ7 models.

Replace worn, soft OE rubber components with Energy Suspension's Hyper-Flex polyurethane front spring bushings to restore handling precision and increase suspension longevity. Unlike factory rubber that degrades under UV exposure, road chemicals, and extreme articulation, these polyurethane bushings maintain their structural integrity to keep your leaf springs properly aligned. This results in more predictable control during hard braking, standing-start acceleration, and technical off-road maneuvering.

• Material: Proprietary Hyper-Flex polyurethane for 5-10x the lifespan of standard rubber
• Performance: Reduces suspension deflection to maintain alignment and improve cornering stability
• Finish: Black
• Installation: Engineered for a precise fit within factory mounting points
• Part Number: 2.2102G

Vehicle Fitment:

• 1976-1983 Jeep CJ5 (Base, Golden Eagle, Laredo, Limited, Renegade)
• 1976-1986 Jeep CJ7 (Base, Golden Eagle, Golden Hawk, Laredo, Limited, Renegade)

Fits 1955-1975 Jeep CJ5 and Willys CJ-5 models. This Energy Suspension Hyper-Flex Master Bushing Set (2.18104R) is a comprehensive solution for restoring suspension precision and off-road handling. By replacing soft, degraded factory rubber with high-performance polyurethane, this kit maintains alignment settings and provides a significant increase in vehicle control under demanding conditions.

• Material: Energy Suspension Hyper-Flex performance polyurethane in Red finish
• Durability: Resistant to undercar chemicals, oils, coolants, and UV exposure
• Alignment: Helps maintain proper caster and camber settings during suspension travel
• Handling: Reduces wheel hop during acceleration and improves braking stability
• Construction: Outlasts OEM rubber bushings for long-term service life
• Origin: Proudly Made in the USA
• Part Number: 2.18104R

Fits select 1971-1988 American Motors and Jeep models, including Cherokee, CJ5, CJ7, Eagle, and J10.

Upgrade your vehicle's drivetrain stability with the Energy Suspension Hyper-Flex motor mount. This red polyurethane mount is engineered to solve the common failure points of factory rubber mounts, which often degrade quickly under heat and stress. Designed for both street and competition use, these mounts provide the ruggedness needed for high-torque applications while remaining compliant enough to absorb excessive vibrations during daily driving.

Built using Energy Suspension’s proprietary Hyper-Flex polyurethane, these mounts are chemically resistant to common under-vehicle contaminants like oil, coolant, and road grime. For added security, this mount features a torque-resistant safety interlock design, providing strength comparable to solid metal mounts without the harshness.

• Replaces soft or worn-out factory rubber motor mounts
• Hyper-Flex polyurethane construction for maximum durability
• Internal safety interlock design for high-torque loads
• Resistant to oils, coolants, and road chemicals
• Color: Red
• Manufacturer Part Number: 2.1102R

Fits select 1971-1988 Jeep and American Motors vehicles, including CJ5, CJ7, Cherokee, Scrambler, J10, and AMC Eagle.

Upgrade your vehicle's drivetrain stability with the Energy Suspension Hyper-Flex polyurethane motor mount. Factory rubber mounts are notorious for dry-rotting and softening over time, especially when exposed to under-vehicle fluids and high operating temperatures. These performance mounts are constructed from high-grade polyurethane that resists oil and coolant while providing the rigidity needed to manage engine torque during aggressive driving or off-road use.

Designed with a torque-resistant safety interlock, these mounts offer strength comparable to solid metal mounts without the harsh vibration transfer common in race-only applications. This makes them an ideal solution for both daily-driven street vehicles and dedicated competition rigs where longevity and performance are required.

• Manufacturer Part Number: 2.1102G
• Material: Hyper-Flex performance polyurethane
• Color: Black
• Design: Integrated safety interlock for high-torque applications
• Resistance: Impervious to oils, coolants, and road contaminants
• Application: Replaces soft, short-lived factory rubber mounts

Fits select 1973-1995 Jeep CJ5, CJ7, Scrambler, and Wrangler. These Energy Suspension transmission torque arm grommets are designed to replace soft, original equipment rubber bushings that degrade over time when exposed to road grime, oils, and torque stress. By upgrading to proprietary Hyper-Flex polyurethane, these grommets provide a more stable mounting point for the torque arm, ensuring better drivetrain alignment and lasting durability.

• Manufactured from Hyper-Flex polyurethane for superior longevity compared to rubber
• Resistant to under-car fluids and oils that cause OEM bushings to rot
• Maintains consistent firmness under high torque loads
• Material: Polyurethane
• Color: Black
• Manufacturer Part Number: 2.1101G

Fits select 2005-2014 Subaru Forester, Impreza WRX, Legacy, and Outback.

Replace soft, compliant factory rubber with Energy Suspension’s Hyper-Flex polyurethane front sway bar bushings to restore and sharpen your vehicle’s handling response. While OE rubber bushings frequently distort and crack over time—leading to excessive body roll and vague steering—this 21mm set maintains its structural integrity under heavy cornering loads. This allows your front sway bar system to work at 100% efficiency, providing the performance of a larger sway bar without the added weight.

• Constructed from premium Hyper-Flex polyurethane for maximum durability and lifespan
• Engineered specifically for 21mm diameter front sway bars
• Highly resistant to under-car fluids, oils, and road grime that deteriorate rubber
• Improves steering precision and reduces chassis roll during cornering
• Includes two black polyurethane bushings for the front sway bar
• Manufacturer Part Number: 19.5105G