Fits 2014-2021 Toyota Tundra 1794 Edition, Limited, Nightshade, Platinum, SR, SR5, Trail, and TRD Pro models (V8-4.6L / 5.7L / 4.6L).

The MagnaFlow Street Series Cat-Back Performance Exhaust System 15306 is engineered to provide a resonant, powerful exterior engine tone with moderate interior sound levels. This system features a direct-fit design, developed through extensive 3D scanning to ensure it bolts directly to factory mounting points. It replaces all stock exhaust components from the catalytic converter back for a complete performance upgrade.

Built from durable, corrosion-resistant stainless steel using CNC precision robotic manufacturing, the kit utilizes 2.5-inch mandrel-bent piping to maintain high flow rates and optimize performance. The straight-through muffler design leads to a dual same-side exit behind the passenger rear tire, capped with 3.5-inch polished, welded-on single-wall angle-cut tips for a clean, aggressive look.

• Part Type: Cat-Back Performance Exhaust System
• Series: Street Series
• Main Piping Diameter: 2.5in.
• Exit Style: Dual Same Side Behind Passenger Rear Tire
• Inlet Connection Type: Bolt-On
• Muffler Quantity: 1 (Straight-Through)
• Tip Diameter: 3.5in.
• Tip Finish: Polished Stainless Steel
• Material: Stainless Steel
• Manufacturer Part Number: 15306
• Warranty: Limited Lifetime Construction; 1-Year Finish

Fits 2014-2018 Mazda 3 models (2.0L).

The MagnaFlow Street Series Cat-Back Performance Exhaust System 15294 is engineered to deliver a resonant, powerful engine tone and dyno-proven performance for your 2014-2018 Mazda 3. This system provides a moderate exterior sound and a mild interior note, offering a more aggressive personality without compromising daily drivability. Built from durable, corrosion-resistant stainless steel, the kit uses CNC precision robotic manufacturing for a perfect direct-fit installation to factory mounting points.

• 2.5-inch mandrel-bent main piping for maximum exhaust flow
• Two straight-through mufflers with a dual split rear exit
• 4-inch polished welded-on double wall angle cut rolled edge tips
• Cat-back layout replaces factory components from the catalytic converter back
• Extensive 3D scanning ensures a direct-fit, bolt-on design
• Manufacturer Part Number: 15294
• Includes MagnaFlow's limited lifetime construction warranty and 1-year limited finish warranty

This Part Fits:

Fits 2014-2019 Chevrolet Silverado 1500/1500 LD and GMC Sierra 1500/1500 Limited (V8-5.3L).

The MagnaFlow Street Series Cat-Back Performance Exhaust System 15267 is engineered to deliver a signature resonant, powerful engine tone while maintaining dyno-proven performance. Specifically designed for Crew Cab and Extended Cab configurations, this system replaces restrictive factory exhaust components from the catalytic converter back with high-flow, 3-inch mandrel-bent stainless steel piping.

This kit features a straight-through performance muffler and a single passenger-side rear exit finished with a 4-inch polished welded-on double-wall angle-cut rolled edge tip. The system is tuned to provide a moderate exterior sound and a mild interior tone, making it ideal for daily-driven trucks. Developed using extensive 3D scanning for a precise direct-fit installation, the 15267 is manufactured with CNC precision robotic techniques for long-term durability and corrosion resistance.

• Durable stainless steel construction for corrosion resistance
• Fast-flowing 3-inch mandrel-bent main piping
• Straight-through performance muffler for a powerful exhaust note
• 4-inch polished double-wall angle-cut rolled edge tip
• Moderate exterior and mild interior sound levels
• Direct-fit bolt-on design for straightforward installation
• Includes all required hardware for installation
• MPN: 15267

Fits 2013-2016 Scion FR-S, 2013-2025 Subaru BRZ, 2017-2020 Toyota 86, and 2022-2026 Toyota GR86.

The MagnaFlow Street Series Cat-Back Performance Exhaust System 15157 is engineered to provide a resonant, powerful engine tone and dyno-proven flow improvements. Designed as a direct-fit replacement for the restrictive factory exhaust, this system bolts on behind the catalytic converter to enhance both the sound profile and aesthetic of the FT86/ZN6/ZN8 platform.

This kit is constructed from durable, corrosion-resistant stainless steel using CNC precision robotic manufacturing. It features 2.5-inch mandrel-bent main piping to ensure consistent exhaust velocity and dual straight-through mufflers for a deep signature sound. The system terminates in a dual split rear exit featuring 4-inch polished, double-wall, angle-cut folded edge tips that fill out the factory bumper cutouts perfectly.

• Direct-fit cat-back layout replaces OEM components from the catalytic converter back
• 2.5-inch mandrel-bent stainless steel tubing for optimized flow
• Dual 4-inch polished double-wall angle-cut tips
• Moderate exterior and mild interior sound levels
• Developed using 3D scanning for precise fitment
• Manufacturer Part Number: 15157
• Limited Lifetime Construction Warranty and 1-year finish warranty

Fits 2010-2013 Mazda 3 S (L4-2.5L). This MagnaFlow Street Series Cat-Back Performance Exhaust System (15146) is engineered to provide a resonant, powerful engine tone while maintaining comfortable interior sound levels. The system replaces your factory exhaust components from the catalytic converter back, utilizing a direct-fit design developed through extensive 3D scanning for a straightforward installation.

Constructed from 2.5-inch mandrel-bent stainless steel piping, this kit features a straight-through muffler design that optimizes exhaust flow. The system terminates in a dual split rear exit featuring 4-inch polished, double-wall, angle-cut rolled-edge tips for a premium aesthetic. Each unit is produced using CNC precision robotic manufacturing to ensure consistent fitment and long-term durability.

• Main Piping Diameter: 2.5 in.
• Tip Diameter: 4.0 in.
• Exit Style: Dual Split Rear
• Material: Stainless Steel
• Muffler Type: Straight-Through
• Finish: Polished Tips
• Manufacturer Part Number: 15146

Fits 2007-2015 Audi Q7 (V8-4.2L / 3.0L / 4.2L).

The MagnaFlow Touring Series Cat-Back Performance Exhaust System 15085 is engineered to provide a resonant, powerful exhaust note while maintaining a mild interior sound profile, ideal for daily driving and long-distance cruising. This direct-fit system utilizes a cat-back layout to replace OEM components from the catalytic converter to the rear exit. Developed through extensive 3D scanning, the 15085 ensures a precise fit to factory mounting points.

Constructed from corrosion-resistant 409 stainless steel, the system features 2.5-inch mandrel-bent main piping for unrestricted exhaust flow. The dual straight-through mufflers lead to a dual split rear exit, finished with 4-inch polished, double-wall, angle-cut folded edge tips. Every kit is produced using CNC precision robotic manufacturing and is backed by a limited lifetime construction warranty.

• Manufacturer Part Number: 15085
• Series: Touring
• Material: 409 Stainless Steel
• Tubing Diameter: 2.5 in.
• Exit Style: Dual Split Rear
• Tip Size: 4 in.
• Tip Type: Double Wall Angle Cut Folded Edge
• Sound Level: Moderate Exterior, Mild Interior
• Inlet Connection: Bolt-On

Fits 2012-2021 Jeep Grand Cherokee SRT, SRT8, and Trackhawk (V8-6.4L / 6.2L / 6.4L).

The MagnaFlow Street Series Cat-Back Performance Exhaust System (15064) is engineered to deliver a signature resonant, powerful engine tone while improving exhaust flow for your V8-equipped Grand Cherokee. This system features 3-inch mandrel-bent main piping that routes through four straight-through mufflers, culminating in a dual split rear exit. This configuration provides a moderate exterior sound and a mild interior cabin volume, perfect for daily-driven performance SUVs.

Constructed from durable, corrosion-resistant stainless steel, this exhaust is built using CNC precision robotic manufacturing techniques. During development, MagnaFlow utilized extensive 3D scanning to ensure a precise, direct-fit design that replaces the factory components from the catalytic converter back to the rear bumper. This kit includes all necessary hardware and retains factory-style mounting points for a straightforward installation.

• 3-inch mandrel-bent stainless steel tubing
• Four straight-through performance mufflers
• Dual split rear exit configuration
• Moderate exterior and mild interior sound profile
• Direct-fit installation using 3D-scanned blueprints
• CNC robotic manufacturing for precise tolerances
• Manufacturer Part Number: 15064
• MagnaFlow limited lifetime construction warranty; 1-year limited finish warranty

Fits select 2006-2011 Chevrolet Impala and 2006-2007 Chevrolet Monte Carlo (3.5L). This BRExhaust Direct-Fit Replacement Exhaust Kit (MPN 116-0015) is designed as a comprehensive solution for replacing worn factory components from behind the last catalytic converter. Built from durable stainless steel, this kit provides a high-quality alternative to OE systems, maintaining emissions compliance without requiring custom fabrication.

The system features precision mandrel-bent piping to ensure consistent flow and reduced backpressure compared to standard crush-bent alternatives. Its multi-piece, bolt-on design allows for a straightforward installation using existing factory mounting points, eliminating the need for bending or welding. This kit includes all necessary hardware to complete the job right the first time.

• Direct-fit replacement for factory exhaust systems
• Durable stainless steel construction for corrosion resistance
• Mandrel-bent pipes for optimized exhaust flow
• Bolt-on installation with no welding or bending required
• Includes (1) 2-bolt gasket, (2) nuts, (2) bolts, and (3) 2.25in band clamps
• Interchanges with OE part numbers: 10333573, 15813759, 15849114, 20881329, 20963869, 25794072
• Covered by a limited lifetime, unlimited mileage warranty

Fits 2009-2012 Buick Enclave (3.6L). The BRExhaust Direct-Fit Replacement Exhaust Kit 106-0829 is a comprehensive solution designed to replace your worn factory exhaust components with a reliable, bolt-on system. This kit is engineered to provide a perfect fit for the Buick Enclave, restoring exhaust integrity and flow without the need for custom fabrication, bending, or welding.

Constructed from durable aluminized steel, this kit features precision mandrel-bent piping. Unlike standard crush-bent pipes, mandrel-bent tubing maintains a constant diameter through every turn, significantly improving exhaust flow. The multi-piece, bolt-on design is optimized for DIY installation, including all necessary gaskets and clamps to get your vehicle back on the road quickly while keeping all emissions equipment intact.

• Direct-fit replacement for OE part numbers 22756999 and 25776344
• Durable aluminized steel construction for corrosion resistance and longevity
• Mandrel-bent tubing ensures superior exhaust flow over factory-style crush bends
• Complete installation hardware included: (2) 2.5in U-bolt clamps, (2) 2in U-bolt clamps, (1) 2-bolt gasket, and nuts/bolts
• Installation replaces components from behind the catalytic converter to maintain emissions compliance
• Manufacturer Part Number: 106-0829
• Covered by a 2-year unlimited mileage warranty

Fits select 2012-2018 Volkswagen Jetta models including GLI, SE, SEL, and Sport trims (1.8L / 2.0L).

The BREexhaust Direct-Fit Replacement Exhaust Kit 106-0791 is designed as a complete, bolt-on solution to replace your worn factory exhaust system. This kit provides a precision-engineered alternative to OE components, utilizing mandrel-bent piping to maintain consistent diameter and optimal exhaust flow. Constructed from durable aluminized steel, this system offers excellent corrosion resistance and long-term reliability for daily driving.

This multi-piece system is designed for a straightforward DIY installation, mounting directly to the factory points without the need for specialized bending or welding. It is engineered to leave all emissions equipment intact, ensuring the vehicle remains compliant while restoring quiet operation and performance. Every kit includes the necessary gaskets and hardware for a complete out-of-the-box installation.

• Construction: Durable aluminized steel tubing
• Tubing Style: Precision mandrel-bent pipes for superior flow
• Installation: Bolt-on, multi-piece design; no welding or fabrication required
• Included Hardware: (1) 2.5in. U-Bolt clamp, gaskets, and all required hardware
• OE Interchange: 1K0 253 141 A, 1K0 253 141 L, 5C6 253 209 AJ, 5C6 253 609 AG
• Warranty: 2-year unlimited mileage warranty
• Part Number: 106-0791

The BREhxaust Direct-Fit Replacement Exhaust Kit (MPN 106-0742) provides a precise, bolt-on solution for restoring the exhaust system on select 2004-2015 Infiniti QX56 and Nissan Armada and Titan (5.6L) models. Designed to replace components from behind or near the final catalytic converter, this kit maintains emissions compliance while improving flow efficiency compared to standard crush-bent alternatives.

Constructed from durable aluminized steel, the system features precision mandrel-bent piping to ensure consistent diameter throughout every curve, minimizing backpressure. The multi-piece, bolt-on design allows for a straightforward installation that bypasses vehicle obstructions without the need for specialized welding or custom fabrication. This kit is engineered to match factory mounting points for a secure, OE-style fit.

• Material: Durable Aluminized Steel
• Tubing: Precision Mandrel-Bent for optimized exhaust flow
• Installation: Multi-piece, bolt-on design; no welding or bending required
• Included Hardware: (2) 2-Bolt Gaskets, (1) Ring Gasket, (1) 2.5in U-Bolt Clamp, (5) 2.25in U-Bolt Clamps, (6) Nuts, and (6) Bolts
• OE Interchange: 20030-7S000, 20030-ZE00B, 20050-7S000, 20050-7S010, 20050-7S200, 20050-9FF0A, 20050-9GH0A, 20050-9GH0B, 20050-ZE00A, 20050-ZE10B, 20100-7S200, 20100-9FF0B, 20100-ZJ00B
• Warranty: 2-Year Unlimited Mileage Warranty

Fits 2006-2012 Toyota RAV4 (Base, Limited, and Sport models).

The BRExhaust Direct-Fit Replacement Exhaust Kit 106-0717 is engineered to restore exhaust system performance with a precision-fit, multi-piece bolt-on design. Constructed from durable aluminized steel, this kit utilizes mandrel-bent piping to maintain a consistent internal diameter through every curve, providing superior exhaust flow compared to standard crush-bent tubing.

This system replaces the exhaust components from behind the final catalytic converter, leaving all factory emissions equipment intact and compliant. The kit is designed for a straightforward DIY installation without the need for specialized bending or welding equipment. All necessary mounting hardware is included in a single package to ensure a perfect fit to factory mounting points.

• Material: Aluminized steel construction for corrosion resistance
• Design: Precision mandrel-bent tubing for optimal flow
• Hardware Included: (2) 2.75in U-Bolt Clamps, (1) 2.25in U-Bolt Clamp, (1) Donut Gasket, and (1) Spring Bolt Kit
• Installation: Direct-fit, bolt-on multi-piece system (no welding required)
• Part Number: 106-0717
• Warranty: 2-year, unlimited mileage warranty

Interchanges with factory OE part numbers: 17404-0P020, 17404-0P021, 17404-0P022, 17404-31020, 17404-31021, 17410-0V020, 17410-0V021, 17410-36120, 17410-36121, 17410-36122, 17420-0V070, 17420-0V071, 17420-0V072, 17420-28620, 17420-28710, 17420-28711, 17420-28712, 17420-36060, 17420-36061, 17420-36062, 17430-0P190, 17430-0P191, 17430-28770, 17430-28771, 17430-28773, 17430-28774, 17430-28775, 17430-31510, 17430-31511, 17430-31512, 17430-31513, 17430-31514.

Fits select 1999-2007 Chevrolet Silverado 1500 and GMC Sierra 1500 (including 2007 Classic models).

The BREhxaust Direct-Fit Replacement Exhaust Kit 106-0714 provides a reliable, high-quality alternative to your vehicle's OEM exhaust system. This kit is designed for a straightforward bolt-on installation, featuring a multi-piece design that clears obstructions without the need for custom fabrication, bending, or welding. Each pipe is precision mandrel-bent from durable aluminized steel to ensure superior exhaust flow compared to standard crush-bent aftermarket systems.

Replacing everything from behind the catalytic converter, this kit maintains full emissions compliance while offering long-lasting corrosion resistance. Every component, gasket, and piece of hardware required for a professional-grade installation is included in a single protective box to get you back on the road faster.

• Construction: Durable Aluminized Steel
• Flow Type: Precision Mandrel Bent tubing for maximum exhaust flow
• Installation: Bolt-on, multi-piece design; no welding or fabrication required
• Included Hardware: (3) 2.5in U-Bolt Clamps, (2) 2.5in U-Bolt Clamp Hangers, (2) Bolts, (2) Nuts
• Emissions Status: Maintains emissions compliance by leaving factory equipment intact
• Warranty: Two-year unlimited mileage warranty
• MPN: 106-0714
• Replaces OE Parts: 10376413, 10376414, 10376415, 15040396, 15040398, 15040399, 15061816, 15062594, 15062595, 15091101, 15091102, 15128251, 15128252, 15128253, 15149600, 15187874, 15187878, 15189626, 15756778, 15756779

Fits 1994-1995 Chevrolet and GMC C1500, C2500, K1500, and K2500 trucks including Silverado and Sierra trims.

The BRExhaust Direct-Fit Replacement Exhaust Kit 106-0710 provides a complete exhaust solution from the catalytic converter back, designed to restore factory performance without the need for custom fabrication. Unlike standard replacement systems that use restrictive crush-bent tubing, this kit features precision mandrel-bent pipes that maintain a consistent diameter throughout every bend to optimize exhaust flow and reduce backpressure.

Engineered as a multi-piece, bolt-on system, the 106-0710 installs directly to factory mounting points using the included hardware. The aluminized steel construction offers reliable corrosion resistance and durability for daily driving. This kit is emissions-compliant, leaving all factory emissions equipment intact while providing a perfect fit for GMT400-platform trucks.

• Material: Durable Aluminized Steel
• Construction: Mandrel-bent tubing for superior flow
• Installation: Direct-fit, bolt-on design; no welding or bending required
• Included Hardware: (4) 3.125in U-Bolt Clamps, (2) Nuts, (2) Bolts
• Interchange Numbers: 12471951, 12471965, 12471967, 12471968, 15659507, 15973803
• Warranty: 2-year manufacturer warranty

Fits 2004-2008 Ford F-150 (all trims) and 2006-2008 Lincoln Mark LT Base.

The BRExhaust Direct-Fit Replacement Exhaust Kit 106-0697 provides a complete solution for restoring your vehicle's exhaust performance. This kit is engineered to replace all components from behind the final catalytic converter, utilizing precision mandrel-bent aluminized steel tubing. Unlike standard crush-bent pipes, mandrel bending maintains a consistent diameter throughout every curve to facilitate superior exhaust flow and reduced backpressure.

Designed as a bolt-on, multi-piece system, this kit allows for a straightforward DIY installation around chassis obstructions without the need for specialized bending or welding. The construction ensures high corrosion resistance and long-term durability, maintaining full emissions compliance by leaving all factory equipment intact.

• Construction: Durable Aluminized Steel
• Bending: Precision Mandrel-Bent Tubing
• Installation: Direct-Fit, Bolt-On (No welding or fabrication required)
• Inclusions: (5) 2.5in U-Bolt Clamps, all necessary gaskets, hardware, and instructions
• MPN: 106-0697
• Warranty: 2-Year Unlimited Mileage

Interchanges with multiple OE part numbers including 4L3Z-5230-A, 5L3Z-5230-BA, 6L3Z-5A212-EA, 7L3Z-5230-AA, and 8L3Z-5230-D.

Fits 1989-1995 Toyota Pickup Base, DLX, and SR5 models equipped with the 3.0L engine.

The BRExhaust 106-0686 Direct-Fit Replacement Exhaust Kit provides a reliable, bolt-on solution to replace worn or rusted factory components from the catalytic converter back. Engineered for durability and ease of installation, this system uses precision mandrel-bent tubing to ensure superior exhaust flow compared to standard crush-bent alternatives. The multi-piece design allows for straightforward DIY installation around vehicle obstructions without the need for specialized bending or welding.

Constructed from aluminized steel for long-lasting corrosion resistance, this kit includes all necessary gaskets and hardware to get your Toyota Pickup back on the road. It maintains full emissions compliance by leaving all factory equipment intact.

• Material: Durable Aluminized Steel
• Construction: Mandrel-bent tubing for optimal flow
• Installation: Direct-fit, bolt-on (no welding or fabrication required)
• Inclusions: (1) Ring Gasket, (2) 2.125-inch U-Bolt Clamps, and installation instructions
• OE Interchanges: 17430-3D330, 17430-3D331, 17430-3D332, 17430-3D333
• Warranty: 2-Year Unlimited Mileage
• MPN: 106-0686

Fits select 1983-1991 Chevrolet S10 Blazer and GMC S15 Jimmy models.

The BRExhaust 106-0682 Direct-Fit Replacement Exhaust Kit is engineered to eliminate the guesswork from exhaust repairs. This aluminized steel system provides a reliable alternative to OEM components, featuring precision mandrel-bent piping to ensure superior exhaust flow compared to standard crush-bent alternatives. Designed as a bolt-on solution for the DIY mechanic, this multi-piece kit installs behind or near the last catalytic converter without the need for specialized bending or welding equipment.

• Direct-Fit Design: Replaces factory components from the catalytic converter back for a perfect fit to existing mounting points.
• Mandrel-Bent Tubing: Maximizes flow efficiency and performance by maintaining a constant diameter through every bend.
• Durable Construction: Fabricated from aluminized steel for high corrosion resistance and long-term service life.
• Complete Hardware Kit: Includes 2.25-inch U-bolt clamps and all necessary mounting hardware to complete the installation in your garage.
• Emissions Compliant: Leaves all factory emissions equipment intact, maintaining full compliance.

Technical Specifications:

• Manufacturer Part Number: 106-0682
• Material: Aluminized Steel
• Hardware Included: (2) Bolts, (3) 2.25in U-Bolt Clamps, (2) Washers, (2) Nuts
• OE Interchange: 15577579, 15577581, 15577583, 15577586, 15577841, 15577868
• Warranty: 2-Year Unlimited Mileage Warranty

Fits 1986-1988 Toyota Pickup (2.4L) including Base, DLX, and SR5 models.

The BRExhaust 106-0674 Direct-Fit Replacement Exhaust Kit provides a high-quality alternative to the factory exhaust system, engineered for a precise fit without the need for welding or specialized fabrication. Constructed from durable aluminized steel, this kit features precision mandrel-bent piping. Unlike standard crush-bending, mandrel bending maintains a consistent internal diameter throughout every curve to ensure optimal exhaust flow and reduced backpressure.

The multi-piece, bolt-on design is specifically engineered for DIY installation, routing around chassis obstructions just like the original equipment. This kit replaces components from the last catalytic converter back, keeping all emissions equipment intact. Each kit comes complete with the necessary gaskets and hardware to get your truck back on the road with a leak-free seal.

• Manufacturer Part Number: 106-0674
• Material: Aluminized Steel
• Construction: Precision Mandrel-Bent
• Included Hardware: (2) 1.75in U-Bolt Clamps, (1) Ring Gasket
• Interchange Parts: 17430-YZZC9, 17430-YZZD1, 17430-YZZN4, 17430-YZZN6
• Warranty: 2-Year Unlimited Mileage

Fits select 2003-2013 Toyota Corolla (1.8L).

The BRExhaust Direct-Fit Replacement Exhaust Kit (106-0626) is engineered to replace your worn or failing factory exhaust with a reliable, bolt-on solution. Constructed from durable aluminized steel, this kit features precision mandrel-bent piping to ensure superior exhaust flow and efficiency compared to standard crush-bent aftermarket alternatives. The multi-piece design allows for a straightforward DIY installation around vehicle obstructions without the need for specialized bending, fabrication, or welding.

This comprehensive kit includes everything required for a professional-grade repair, including a donut gasket and a spring bolt kit. It is designed to maintain emissions compliance by leaving factory emissions equipment intact. This system serves as a direct interchange for OE part numbers 17430-0T050 and 17430-37280.

• Durable aluminized steel construction for long-lasting corrosion resistance
• Precision mandrel bending maximizes exhaust flow and performance
• No-weld, bolt-on design for easy DIY installation
• Includes (1) donut gasket and (1) spring bolt kit
• Interchanges with OE parts: 17430-0T050, 17430-37280
• Manufacturer Part Number: 106-0626
• 2-year unlimited mileage warranty

Fits 2003-2007 Honda Accord EX, EX-L, LX, and SE models (2.4L).

The MagnaFlow BRExhaust Direct-Fit Replacement Exhaust Kit (106-0585) provides a comprehensive solution for restoring your vehicle's exhaust system performance. Engineered as a bolt-on alternative to factory components, this kit replaces everything from behind the catalytic converter back. Each pipe is precision mandrel-bent from durable aluminized steel to ensure superior exhaust flow and backpressure reduction compared to standard crush-bent alternatives. The multi-piece design allows for straightforward DIY installation around vehicle obstructions without the need for specialized bending or welding.

• Material: Durable aluminized steel for corrosion resistance
• Construction: Precision mandrel-bent tubing for optimized flow
• Installation: Direct-fit, bolt-on design; no welding required
• Emissions: Retains factory emissions equipment and compliance
• Hardware Included: (1) Ring Gasket, (2) 1.75in. U-Bolt Clamps, (3) Bolts, (3) Nuts, and instructions
• OE Interchange: 18030-SDN-A00, 18030-SDN-A01, 18030-SDN-A10
• Warranty: 2-year, unlimited mileage warranty
• MPN: 106-0585

Fits 2003-2011 Ford Crown Victoria and Mercury Grand Marquis models equipped with the 4.6L engine.

The MagnaFlow BRExhaust Direct-Fit Replacement Exhaust Kit (106-0532) provides a reliable, bolt-on alternative to original equipment. This kit utilizes precision mandrel-bent aluminized steel tubing to facilitate superior exhaust flow compared to standard crush-bent aftermarket pipes. Designed as a complete multi-piece system, it installs directly to factory mounting points without the need for welding or specialized fabrication tools, keeping all emissions equipment intact and functional.

• Construction: Durable aluminized steel for high corrosion resistance.
• Flow Design: Mandrel-bent pipes ensure smooth exhaust gas velocity and reduced backpressure.
• Installation: Bolt-on, multi-piece design for easy DIY installation without welding.
• Warranty: Covered by a 2-year, unlimited mileage warranty.
• Includes: (6) 2.125-inch U-bolt clamps, (2) 2-bolt gaskets, (4) bolts, (4) nuts, and installation instructions.
• MPN: 106-0532
• OE Interchange: 3W7Z-5230-BA, 3W7Z-5230-CC, 3W7Z-5246-AA, 3W7Z-5246-CA, 4W7Z-5246-AA, 4W7Z-5246-CA, 5W7Z-5230-BB, 6W7Z-5230-BB.

Fits 2006-2009 Dodge Ram 1500, 2500, and 3500 (5.7L).

The BRExhaust 106-0525 Direct-Fit Replacement Exhaust Kit is designed to eliminate the guesswork of exhaust repairs, providing a high-quality alternative to OEM systems. Constructed from durable aluminized steel, this kit features precision mandrel-bent piping to ensure superior exhaust flow compared to standard crush-bent alternatives. The multi-piece, bolt-on design allows for a straightforward installation that requires no welding or bending, mounting directly to factory points to get your vehicle back on the road efficiently.

• Durable Construction: High-quality aluminized steel offers excellent corrosion resistance and longevity.
• Mandrel-Bent Tubing: Maintains consistent pipe diameter through bends for optimized exhaust flow.
• Complete Installation Kit: Includes (1) 3-inch U-bolt clamp hanger, (4) 3.125-inch U-bolt clamps, and all necessary gaskets.
• Emissions Compliant: Replaces components behind the catalytic converter, keeping all emissions equipment intact.
• OE Interchange: Replaces part numbers 52103510AC-AI, 52103525AC-AE, 52121124AA-AC, 52121280AA, and 52122110AA.
• Manufacturer Warranty: Covered by a 2-year, unlimited mileage warranty.

Manufacturer Part Number: 106-0525

Fits 2011-2016 Ford F-250 and F-350 Super Duty (6.2L).

The BRExhaust Direct-Fit Replacement Exhaust Kit (106-0522) is designed for a precise, bolt-on installation that restores your truck's performance and sound. Built from durable aluminized steel, this kit eliminates the need for custom fabrication or specialized shop tools. Unlike many aftermarket replacements that use restrictive crush-bent tubing, this system features precision mandrel-bent pipes to maintain a consistent internal diameter throughout the bends, facilitating superior exhaust flow and reduced backpressure.

This multi-piece system installs behind the last catalytic converter, keeping your vehicle emissions-compliant while replacing worn OE components. The kit is packaged with all necessary gaskets and clamps, ensuring you have everything required for a successful DIY installation without welding or bending.

• Material: Corrosion-resistant aluminized steel construction
• Installation: Direct-fit, bolt-on design; no welding or bending required
• Exhaust Path: Replaces components from behind the catalytic converter
• Hardware Included: (2) Nuts, (1) 2.75in Sleeve Clamp, (1) Donut Gasket, (2) Washers, (3) 3in U-Bolt Clamps, (2) Bolts
• Manufacturer Part Number: 106-0522
• Warranty: 2-year / unlimited mileage coverage
• OE Interchange: Replaces 7C3Z-5A212-AA, 7C3Z-5A212-CA, 7C3Z-5A212-EB, 8C3Z-5A212-B, BC3Z-5201-A, BC3Z-5230-A, BC3Z-5230-K, BC3Z-5A212-A, BC3Z-5A212-AA, BC3Z-5A212-AF, BC3Z-5A212-AG, BC3Z-5A212-AJ, BC3Z-5A212-AL, BC3Z-5A212-AQ, BC3Z-5A212-AR, BC3Z-5A212-D, BC3Z-5A212-F, BC3Z-5A212-W, BC3Z-5A212-X, BC3Z-5A212-Y, CC3Z-5202-A

Fits select 1999-2007 Chevrolet Silverado 1500 and GMC Sierra 1500 models (including Classic series). This BREhxaust Direct-Fit Exhaust Kit (MPN 106-0509) provides a precision-engineered solution for replacing a worn or damaged factory exhaust system without the need for custom fabrication, welding, or bending.

Constructed from durable aluminized steel, this kit replaces all components from behind the catalytic converter. Unlike many aftermarket replacements that use crush-bent tubing, BREhxaust utilizes mandrel-bent pipes to maintain a consistent inner diameter throughout every curve, facilitating superior exhaust flow and reducing backpressure. The multi-piece, bolt-on design is engineered to clear factory chassis obstructions for a straightforward DIY installation that preserves all original emissions equipment.

• Material: Durable aluminized steel for corrosion resistance
• Construction: Precision mandrel-bent tubing for optimized exhaust flow
• Installation: Direct-fit, bolt-on design; no welding or bending required
• Compliance: Maintains all factory emissions equipment and standards
• Included Hardware: (3) 2.5in U-Bolt Clamps, (2) Bolts, (2) Nuts, and gaskets
• Warranty: 2-year unlimited mileage warranty
• Interchange: Replaces OE part numbers 10376411, 15040396, 15091097, 25862736, and more

Fits select 1994-1995 Chevrolet and GMC C1500, C2500, K1500, and K2500 trucks (Base, Cheyenne, Silverado, WT, Sierra SL, SLE, SLT, and Special).

The BRExhaust Direct-Fit Replacement Exhaust Kit 106-0495 is a comprehensive, bolt-on solution designed to replace the factory system from the catalytic converter back. Engineered to match OE geometry, this kit utilizes durable aluminized steel and precision mandrel-bent piping to maintain optimal exhaust flow, avoiding the restrictions common in crush-bent alternatives. The multi-piece design facilitates a straightforward DIY installation around chassis obstructions without requiring specialized fabrication, bending, or welding.

• Direct-fit replacement for factory exhaust components behind the last catalytic converter
• Precision mandrel-bent aluminized steel construction for superior flow and corrosion resistance
• Complete bolt-on kit includes (5) 3.125in U-bolt clamps, (2) bolts, and (2) nuts
• Maintains emissions compliance by keeping all factory equipment intact
• Manufacturer Part Number: 106-0495
• Interchanges with OE parts: 12471952, 12471965, 12471967, 12471968, 12471969, 15659510, 15973804, 15973805, 15973806, 15973811, 15973812
• Two-year unlimited mileage warranty

Fits select 1988-1993 Chevrolet and GMC C1500, K1500, C2500, and K2500 pickups. This BRExhaust Direct-Fit Replacement Exhaust Kit provides a complete solution for refreshing your truck's exhaust system from the catalytic converter back.

Constructed from durable aluminized steel, this kit utilizes precision mandrel-bent tubing to maintain consistent diameter through every turn, significantly improving exhaust flow over traditional crush-bent pipes. The multi-piece, bolt-on design is engineered for straightforward installation using factory mounting points, requiring no specialized welding or pipe bending. This kit is designed to leave all factory emissions equipment intact for full compliance.

• Material: Aluminized Steel
• Tubing: Precision Mandrel-Bent
• Fitment Type: Direct-Fit Bolt-On
• Clamps Included: (5) 2.5-inch U-Bolt Clamps, (2) 2.25-inch U-Bolt Clamps
• OE Interchange Numbers: 1554877, 15576677, 15576680
• Manufacturer Part Number: 106-0474
• Warranty: 2-Year Unlimited Mileage

Each kit includes all necessary gaskets, clamps, and hardware required to complete the installation in a single package.

Fits 2004-2009 Ford Ranger and Mazda B2300 models (2.3L).

The BRExhaust 106-0462 Direct-Fit Replacement Exhaust Kit is engineered to eliminate the complexity of exhaust repairs by providing a precise, bolt-on solution. This kit features mandrel-bent aluminized steel piping, which maintains a consistent internal diameter through every curve to ensure superior exhaust flow compared to restrictive, crush-bent factory alternatives. Designed as a complete replacement from behind the last catalytic converter, this system preserves all factory emissions equipment while restoring OE-level performance and sound.

• Precision Engineering: Mandrel-bent pipes optimize exhaust scavenging and flow for efficient operation.
• Durable Construction: Built from corrosion-resistant aluminized steel for long-term durability in various driving conditions.
• Complete Installation Kit: Includes (1) donut gasket, (3) 2.125-inch U-bolt clamps, (2) bolts, and (2) nuts for a professional installation.
• No Fabrication Required: Multi-piece, bolt-on design allows for a straightforward DIY install with no welding or specialized bending needed.
• OE Compatibility: Interchanges with factory part numbers 4L5Z-5230-AA, 5L5Z-5230-A, and 7L5Z-5230-A.
• Warranty: Backed by a 2-year, unlimited mileage warranty.

The BRExhaust Direct-Fit Replacement Exhaust Kit (106-0441) offers a precision-engineered solution to restore exhaust performance on the 1999-2004 Toyota Tacoma (2.4L). This kit replaces all components from behind the last catalytic converter, providing a reliable alternative to OEM parts with a focus on durability and easy installation.

Constructed from aluminized steel, this system features mandrel-bent tubing to ensure consistent diameter throughout the exhaust path. Unlike traditional crush-bent pipes that can restrict flow, these mandrel bends facilitate superior exhaust scavenging. The multi-piece, bolt-on design allows for a straightforward DIY installation without the need for welding, cutting, or specialized fabrication, fitting perfectly around factory chassis obstructions.

• Vehicle Fitment: Fits 1999-2004 Toyota Tacoma Base and 1999-2000 SR5 models (2.4L).
• Construction: High-corrosion resistance aluminized steel for long-term service life.
• Performance: Precision mandrel-bent pipes optimize exhaust flow over OE-style crush bends.
• Installation: Bolt-on design; includes all necessary gaskets, clamps, and hardware.
• OE Interchange: Replaces factory part numbers 17405-0C040 and 17405-0C060.
• Included Hardware: (1) Ring Gasket, (1) 2-Bolt Gasket, (2) 2.125in U-Bolt Clamps, (4) Nuts, and (2) Bolts.
• Warranty: Two-year unlimited mileage manufacturer warranty.

Fits 2006-2010 Hyundai Sonata (2.4L).

The BRExhaust Direct-Fit Replacement Exhaust Kit (MPN 106-0424) is a comprehensive solution designed to replace your worn factory exhaust system with precision and durability. Unlike standard aftermarket options that use restrictive crush-bent pipes, this kit features mandrel-bent aluminized steel tubing to maintain a consistent internal diameter, ensuring superior exhaust flow and long-term corrosion resistance.

Engineering for a straightforward installation, this multi-piece, bolt-on system is designed to install behind the rear-most catalytic converter. It requires no welding or specialized fabrication, making it an ideal choice for DIY repairs. Each kit comes complete with all necessary gaskets and hardware to ensure a professional, leak-free seal and factory-style fitment.

• Construction: High-quality aluminized steel for enhanced durability and corrosion protection.
• Design: Mandrel-bent piping for optimal exhaust flow and performance.
• Installation: Direct-fit, bolt-on multi-piece design; no welding or bending required.
• Included Hardware: (2) 2-bolt gaskets, (1) 2.125-inch U-bolt clamp, (4) nuts, and (4) bolts.
• OE Interchange: Replaces 28650-3K160, 28650-3K570, 28700-3K160, and 28700-3K520.
• Warranty: Manufacturer-backed 2-year unlimited mileage warranty.

Fits 2008-2012 Honda Accord EX, EX-L, LX, LX-P, and SE models (2.4L).

The BRExhaust 106-0362 Direct-Fit Replacement Exhaust Kit is engineered to eliminate the complexity of exhaust repairs. This multi-piece, bolt-on system serves as a reliable alternative to factory components, utilizing precision mandrel-bent aluminized steel tubing. Unlike standard crush-bent pipes, mandrel bending maintains a consistent internal diameter throughout every curve, ensuring optimal exhaust flow and reducing backpressure. Designed to install behind the last catalytic converter, this kit keeps all emissions equipment intact while providing high corrosion resistance.

• Precision Construction: Durable aluminized steel with mandrel-bent tubing for superior flow and longevity.
• Direct-Fit Design: Engineered for a perfect fit to factory mounting points without the need for specialized bending or welding.
• Complete Hardware Kit: Includes (3) 2.125-inch U-bolt clamps, (1) ring gasket, (3) bolts, and (3) nuts for a comprehensive DIY installation.
• OE Interchange: Replaces original equipment parts 18307-TA0-A01 and 18307-TA5-A01.
• Warranty: Backed by a 2-year unlimited mileage warranty.