Fits 2014-2025 Ram 2500 4WD models with 4-6 inches of rear lift, including Power Wagon, Rebel, Tradesman, and Laramie trims.

The Fox 2.5 Performance Elite Series shock is engineered to provide superior damping and heat management for heavy-duty trucks operating in demanding environments. Featuring a 2.5-inch impact-extruded aluminum body, this shock increases oil capacity to dissipate heat more effectively than standard 2.0-inch shocks. The external reservoir system further enhances cooling by separating the nitrogen charge from the oil, ensuring consistent performance during extended off-road use or heavy towing.

This shock is equipped with the Dual Speed Compression (DSC) adjuster, allowing for precise, tool-free tuning of both high-speed and low-speed compression. Whether adjusting for varying payloads or specific terrain types, the DSC system provides the flexibility to maintain chassis control without sacrificing ride quality. The 7/8-inch hard chromed heat-treated alloy steel shaft and redundant sealing system are designed to withstand debris and harsh conditions for long-term durability.

• Manufacturer Part Number: 883-26-067
• Shock Body: 2.5" Smooth bore zinc-plated seamless alloy
• Shaft: 7/8" Hard chromed heat-treated alloy steel
• Travel: 11.100 inches
• Adjuster: Dual Speed Compression (DSC)
• Reservoir: External aluminum reservoir
• Components: Black anodized, CNC-machined 6061-T6 aluminum
• Fitment: Specific to 2014-2025 Ram 2500 with 4-6" lift

Fits 2014-2025 Ram 2500 4WD models across all trims, including Power Wagon, Rebel, Laramie, and Tradesman (0-1.5" lift).

The Fox Performance Elite Series 2.5 reservoir shocks are engineered to provide superior damping and heat management for heavy-duty Ram 2500 applications. Built with a 2.5-inch smooth bore aluminum body, these shocks dissipate heat significantly faster than conventional steel bodies, preventing fade during extended off-road use or heavy towing. The external reservoir system increases oil capacity to maintain consistent performance under high-thermal loads.

These shocks feature Fox’s widest range of external adjustability, allowing you to fine-tune the damping based on vehicle load, terrain, and speed. The 7/8-inch hard chromed heat-treated steel shaft and redundant seal pack ensure durability in harsh environments. These units are fully serviceable, designed for long-term reliability and rebuildability.

• Manufacturer Part Number: 883-26-065
• 2.5" impact-extruded 6061-T6 aluminum body for superior heat dissipation
• External reservoir for increased oil and nitrogen capacity
• 7/8" hard chrome plated heat-treated alloy steel shaft
• Black-anodized, CNC-machined 6061-T6 aluminum components
• Application-specific valving and high-flow racing pistons
• Redundant seal pack system: main seal, wiper seal, and scraper seal

Fits select 2014-2025 Ram 2500 and 3500 models equipped with a 6-inch front lift. These Fox Performance Elite Series 2.5 reservoir shocks provide a significant upgrade in damping capacity and thermal management for heavy-duty trucks.

Engineered for extreme environments, these shocks feature a 2.5-inch diameter zinc-plated seamless alloy body paired with an external reservoir to increase oil volume and surface area for heat dissipation. The larger aluminum body sheds heat more efficiently than traditional steel, while the 7/8-inch hard-chromed shaft and redundant seal pack ensure long-term durability in harsh conditions. With Fox's race-developed high-flow pistons and extensive adjustability, you can fine-tune the suspension for specific loads, terrain, and speeds.

• Manufacturer Part Number: 883-26-064
• Application: Front (Select 2014-2025 Ram 2500/3500)
• Compatible Lift Height: 6 inches
• Shock Diameter: 2.5 inches
• Shaft Diameter: 7/8 inch hard-chromed alloy
• Body Material: Zinc-plated seamless alloy with aluminum reservoir
• Components: Black-anodized CNC-machined 6061-T6 aluminum
• Piston: Race-developed high-flow design
• Fully serviceable for extended service life

Fits select 2013-2025 Ram 2500 and 3500 4WD models equipped with a 2-to-3.5-inch front lift.

The Fox Performance Elite Series 2.5 reservoir shocks provide the ultimate level of control and heat management for heavy-duty trucks. Featuring a massive 2.5-inch zinc-plated alloy body, these shocks offer significantly more oil volume than standard dampers, allowing the race-developed high-flow pistons to remain consistent during high-speed use or while navigating technical terrain. The external reservoir system maximizes cooling by moving oil away from the main shock body, effectively dissipating heat under load.

Built for longevity in harsh environments, these shocks utilize a 7/8-inch hard chromed shaft and a redundant seal pack to prevent contamination. They are fully serviceable, ensuring a lifetime of performance. With the widest range of external adjustability in the Fox lineup, you can quickly tune the compression to compensate for varying payloads, trailer weights, and road conditions.

• Manufacturer Part Number: 883-26-063
• 2.5-inch durable zinc-plated seamless alloy body
• 7/8-inch hard chromed heat-treated alloy steel shaft
• External reservoir system for superior heat dissipation
• Black anodized CNC-machined 6061-T6 aluminum components
• Race-developed high-flow piston design
• Redundant sealing system: main seal, wiper seal, and scraper seal
• Fully rebuildable and re-valvable

Fits 2019-2026 Chevrolet Silverado 1500 and GMC Sierra 1500 models, including Trail Boss, AT4, and ZR2 trims (0-2" Rear Lift).

The FOX Performance Elite Series 2.5 shocks are engineered to provide maximum control and heat dissipation for late-model GM 1500 trucks. These shocks feature a 2.5-inch smooth bore aluminum body that resists corrosion and sheds heat significantly faster than traditional steel bodies. Equipped with FOX's Dual Speed Compression (DSC) adjusters, you can independently fine-tune high-speed and low-speed compression with a simple turn of the dials, allowing for precise setup changes based on cargo load, terrain, or driving style.

Internally, these shocks utilize race-developed high-flow pistons and a 7/8-inch hard-chromed, heat-treated alloy steel shaft for ultimate durability. The external reservoir system increases oil capacity to prevent damping fade during sustained use in harsh environments. These shocks are fully serviceable and designed for a lifetime of performance.

• 2.5-inch impact-extruded and CNC-machined 6061-T6 aluminum body
• Dual Speed Compression (DSC) adjusters for precise tuning
• 7/8-inch hard-chromed, heat-treated alloy steel shock shaft
• External reservoir design for superior heat dissipation and oil volume
• Redundant seal pack system: main seal, wiper seal, and scraper seal
• Black-anodized CNC-machined aluminum components
• Direct bolt-on replacement for factory rear shocks
• Manufacturer Part Number: 883-26-060

Fits 2021-2023 Ford F-150 models including Raptor, Tremor, King Ranch, Lariat, Limited, Platinum, Police Responder, SSV, XL, and XLT.

The Fox Factory Race Series 3.2 Live Valve front coilover represents the pinnacle of off-road suspension technology for the 2021-2023 Ford F-150. Designed to integrate seamlessly with the truck's onboard electronics, the Live Valve system monitors terrain and driver input up to 400 times per second. This active adjustment ensures the perfect damping profile for any environment, from high-speed desert runs to technical rock crawling and daily pavement driving.

Constructed with a massive 3.2-inch diameter zinc-plated seamless alloy body, these coilovers provide superior fluid capacity and structural rigidity. The external reservoir system is engineered to dissipate heat rapidly, preventing fade during sustained hard use. Every component is built to exacting tolerances, utilizing black anodized CNC-machined aluminum for maximum durability and corrosion resistance.

• Provides 2-2.5 inches of front suspension lift
• Active Live Valve technology for real-time damping adjustments
• 3.2-inch diameter zinc-plated seamless alloy body
• External reservoir system for enhanced cooling and heat dissipation
• Black anodized CNC-machined aluminum components
• Performance tuned for vehicle-specific applications
• Manufacturer Part Number: 883-06-262

Fits 2024-2025 Ford F-150 (King Ranch, Lariat, Platinum, Police Responder, Raptor, SSV, STX, Tremor, XL, and XLT models).

The Fox Factory Race Series 3.2 Live Valve front coilovers provide the ultimate suspension upgrade for the 2024+ Ford F-150. Engineered to handle everything from high-speed desert runs to highway cruising, these coilovers utilize Fox Live Valve technology to monitor terrain and driver input 400 times per second. This active damping system adjusts the suspension in real-time, ensuring optimal stability, control, and comfort regardless of the environment.

Constructed with a 3.2-inch seamless alloy body and finished with durable zinc plating, these coilovers are built for longevity in harsh conditions. The external reservoir system significantly increases oil capacity, allowing for faster heat dissipation during aggressive off-road use. Every component is precision-engineered, featuring black anodized CNC-machined aluminum hardware for maximum strength and corrosion resistance.

• Provides 2.0 to 2.5 inches of front lift height
• Live Valve technology for real-time damping adjustments
• 3.2-inch smooth bore zinc-plated seamless alloy body
• External reservoir dissipates heat for consistent performance
• Black anodized CNC-machined 6061-T6 aluminum components
• Vehicle-specific tuning for optimized ride quality
• Manufacturer Part Number: 883-06-257

Fits 2016-2019 Toyota Hilux models with 2-3 inches of front lift.

The FOX 2.5 Performance Elite Series front coilovers are engineered to provide increased wheel travel and damping control for demanding off-road environments. These shocks feature a large 2.5-inch seamless alloy body with a durable zinc-plated finish for superior corrosion resistance and heat dissipation. The external remote reservoir system increases internal oil capacity, allowing the race-developed high-flow pistons to maintain consistent performance and avoid fade during prolonged use.

Built for extreme durability, each coilover utilizes a 7/8-inch hard chromed shock shaft and a redundant seal pack to protect against harsh contaminants in extreme conditions. The CNC-machined 6061-T6 aluminum components are black anodized for long-term protection. These coilovers are fully adjustable, allowing you to tune the damping for various loads, speeds, and terrain types. Rebuildable and serviceable for a lifetime of use, this pair comes ready to install with all necessary hardware for a vehicle-specific fit.

• Part Number: 883-06-235
• 2.5-inch zinc-plated seamless alloy body
• External remote reservoir for efficient heat dissipation
• 7/8-inch hard chromed heat-treated alloy steel shaft
• Black-anodized CNC-machined 6061-T6 aluminum components
• Redundant sealing system including main seal, wiper seal, and scraper seal
• Adjustable 2-3 inch lift height
• Sold as a pair (front left and front right)

Fits 2010-2014 Ford F-150 SVT Raptor models.

The FOX Factory Race Series 3.0 Internal Bypass front coilover assembly provides professional-grade damping performance and a 2-inch lift for the first-generation Raptor. Engineered to handle extreme off-road terrain, these coilovers utilize FOX’s patented internal bypass technology, which allows oil to bypass the piston through ports in the cylinder wall during the ride zone for a plush feel, while providing high damping force at the end of the stroke to prevent bottoming out.

This system features Dual Speed Compression (DSC) adjusters, allowing you to fine-tune high-speed and low-speed compression damping with a simple turn of a dial. The external "Cactus Cooler" reservoir significantly increases oil capacity and surface area to dissipate heat quickly during high-speed desert runs, ensuring consistent performance without fade.

• MPN: 883-06-233
• Lift Height: 2 inches
• Body: 3.0-inch durable zinc-plated seamless alloy body with CNC-machined 6061-T6 aluminum components
• Shaft: 7/8-inch hard chrome plated heat-treated alloy steel with redundant sealing
• Adjustment: Dual Speed Compression (DSC) for terrain-specific tuning
• Reservoir: External reservoir system for maximum heat dissipation
• Technology: Patented internal bypass design for position-sensitive damping

Fits 2024-2026 Toyota Tacoma (SR, SR5, TRD Sport, TRD Off-Road, TRD PreRunner, TRD Pro, Trailhunter, and Limited).

The Fox Factory Race Series 3.0 IBP DSC EVO front shocks provide uncompromised performance for the fourth-generation Tacoma. Utilizing patented internal bypass (IBP) technology, these shocks create a ride zone that allows oil to bypass the piston at specific points in the stroke for a plush ride, while ramping up pressure at the ends of the stroke to prevent bottoming out. The Dual Speed Compression (DSC) adjuster allows for precise high-speed and low-speed compression tuning to match your vehicle's weight and terrain.

Engineered for extreme durability, these shocks feature 3.0-inch impact-extruded aluminum bodies for superior heat dissipation compared to traditional steel. The external Cactus Cooler reservoir system further manages temperatures during high-speed desert runs, while 7/8-inch shafts with redundant seals ensure long-term reliability in harsh environments. All components are CNC-machined from 6061-T6 aluminum and black anodized for corrosion resistance.

• Manufacturer Part Number: 883-06-232
• Supports 2-3 inches of front lift height
• 3.0-inch smooth bore zinc-plated seamless steel and aluminum bodies
• Internal Bypass technology for position-sensitive damping
• DSC (Dual Speed Compression) adjustment for independent high/low speed tuning
• 7/8-inch hard chrome-plated heat-treated alloy steel shafts
• External reservoir with Cactus Cooler technology for maximum cooling
• Vehicle-specific valving for optimized handling and control

Fits 2024-2026 Toyota Tacoma (SR, SR5, Limited, TRD Off-Road, TRD Sport, TRD PreRunner, TRD Pro, and Trailhunter).

The Fox 2.5 Performance Elite Series front reservoir shocks are engineered to provide superior damping control and extended wheel travel for the redesigned Tacoma platform. Featuring a 2.5-inch impact-extruded 6061-T6 aluminum body, these shocks dissipate heat significantly faster than conventional steel-bodied shocks. The external reservoir system increases oil capacity, working alongside Fox's race-developed high-flow pistons to maintain consistent performance during high-speed cycling and technical off-road maneuvers.

Equipped with the DSC (Dual Speed Compression) EVO adjuster, these shocks allow for precise tuning of high-speed and low-speed compression to accommodate varying loads, terrain, and driving styles. The 7/8-inch hard-chromed heat-treated alloy steel shaft and redundant seal pack ensure long-term durability in harsh environments. These shocks are fully rebuildable and re-valvable, offering a lifetime of serviceability.

• Fits 1-3 inch lift heights
• 2.5-inch 6061-T6 hard-anodized aluminum body
• DSC EVO adjusters for high and low-speed compression tuning
• 7/8-inch hard chromed shock shaft
• Black-anodized, CNC-machined 6061-T6 aluminum components
• External reservoir for increased thermal capacity
• Manufacturer Part Number: 883-06-224

Fits select 2022-2026 Toyota Tundra models including SR, SR5, Limited, Platinum, 1794 Edition, Capstone, and TRD Pro.

The Fox 3.0 Factory Race Series Internal Bypass front shocks deliver professional-grade suspension performance for the third-generation Tundra. Featuring Fox's patented internal bypass technology, these shocks allow oil to flow around the piston through specific ride zones, providing a plush, compliant feel during normal driving while generating massive damping force at the ends of the stroke to prevent bottoming out during high-speed off-road use.

Constructed with 3.0-inch zinc-plated or hard-anodized aluminum bodies, these shocks dissipate heat significantly faster than traditional steel alternatives. The external "Cactus Cooler" reservoirs further enhance cooling efficiency, while the Dual Speed Compression (DSC) adjusters allow for precise fine-tuning of high-speed and low-speed compression to match your vehicle's load and the specific terrain.

• Bore Size: 3.0-inch aluminum body for superior heat management
• Shaft Diameter: 7/8-inch hard-chromed, heat-treated alloy steel
• Adjustment: Dual Speed Compression (DSC) for high and low-speed damping
• Reservoir: External finned "Cactus Cooler" reservoir for maximum cooling
• Lift Height: Engineered for 2.0-2.25 inches of front lift
• Components: Black anodized 6061-T6 CNC-machined aluminum
• Installation: Direct bolt-on replacement for factory front shocks
• Manufacturer Part Number: 883-06-219

Fits 2022-2026 Toyota Tundra models including SR, SR5, Limited, Platinum, 1794 Edition, TRD Pro, and Capstone.

The Fox 2.5 Factory Series R/R (Remote Reservoir) Coilover Set is engineered to transform the 2022-2026 Toyota Tundra’s suspension performance, offering a height-adjustable 0-3 inch lift. These shocks feature an external reservoir to increase oil capacity and enhance heat dissipation, ensuring consistent damping under aggressive use. The integrated Dual Speed Compression (DSC) adjusters provide professional-level tuning, allowing for 12 low-speed and 10 high-speed compression levels to match your specific vehicle load and terrain requirements.

• 2.5-Inch Aluminum Body: Impact-extruded 6061-T6 aluminum body dissipates heat faster than traditional steel and provides superior corrosion resistance.
• DSC Adjustability: Tool-free Dual Speed Compression (DSC) adjusters allow for immediate fine-tuning for terrain and cargo weight.
• Heavy-Duty Shaft: 7/8-inch hard chromed heat-treated alloy steel shock shaft designed for high-stress off-road environments.
• Redundant Seal Pack: Features a main seal, wiper seal, and scraper seal to protect internals from debris and extend service life.
• Precision Components: CNC-machined 6061-T6 black-anodized aluminum components and application-specific high-flow race pistons.

This coilover set is fully serviceable and designed to provide a lifetime of performance. Manufacturer Part Number: 883-06-218.

Fits 2021-2026 Ford Bronco models including Badlands, Base, Big Bend, Black Diamond, Everglades, Heritage, Outer Banks, Raptor, and Wildtrak.

The FOX 2.5 Performance Elite Series rear coil-over shocks are engineered to enhance your vehicle's off-road capability by providing increased wheel travel and superior damping control. The 2.5-inch impact-extruded aluminum bodies dissipate heat significantly faster than conventional steel, while the external reservoir system increases internal oil volume to prevent fading during aggressive use. Equipped with FOX’s race-developed high-flow pistons, these shocks deliver consistent performance across diverse terrain.

Built to withstand extreme environments, these shocks feature a 7/8-inch hard chromed heat-treated steel shaft and a redundant seal pack system. The Performance Elite series offers a wide range of external adjustability, allowing drivers to fine-tune the suspension for specific vehicle loads, speeds, and trail conditions. These units are fully serviceable, ensuring a lifetime of performance for your Bronco.

• 2.5-inch impact-extruded and CNC-machined 6061-T6 aluminum body
• External reservoir design for maximum heat dissipation and oil capacity
• 7/8-inch hard chromed heat-treated steel shock shaft
• Black-anodized CNC-machined aluminum components
• Redundant seal pack system with main seal, wiper seal, and scraper seal
• Vehicle-specific tuning for optimized performance
• Fully serviceable design for long-term durability
• Manufacturer Part Number: 883-06-213

Fits 2021-2026 Ford Bronco (Badlands, Base, Big Bend, Black Diamond, Everglades, First Edition, Heritage, Outer Banks, Raptor, Stroppe Edition, and Wildtrak).

Enhance your Ford Bronco’s off-road capability with the Fox Performance Elite 2.5 Reservoir Coil-Over and Upper Control Arm (UCA) kit. This system is engineered to provide increased wheel travel and structural strength, solving the performance limitations of factory suspension. The 2.5-inch impact-extruded 6061-T6 aluminum bodies dissipate heat significantly faster than conventional steel shocks, while the external reservoir increases oil volume for consistent damping during high-speed desert runs or technical crawling.

These adjustable shocks feature race-developed high-flow pistons and a 7/8-inch hard-chromed heat-treated alloy steel shaft. The included UCAs are designed to work in tandem with the extended travel of the coil-overs, maintaining proper alignment geometry. Built for harsh environments, the assembly uses a redundant seal pack and black-anodized CNC-machined aluminum components for long-term durability and corrosion resistance.

• 2.5-inch 6061-T6 impact-extruded aluminum body resists rust and heat
• External reservoir system for increased oil capacity and cooling
• Includes Upper Control Arms (UCAs) for optimized suspension geometry
• 7/8-inch hard chromed heat-treated alloy steel shock shaft
• Fully adjustable for terrain, load, and speed
• Race-developed high-flow piston design for precise control
• Fully serviceable for an extended product lifespan
• Manufacturer Part Number: 883-06-212

Fits 2021-2025 Ford F-150 4WD models, including Raptor, Tremor, Lariat, and XLT. These Fox Performance Elite Series 2.5 shocks are engineered to increase wheel travel and provide superior damping control for late-model F-150s. Designed for harsh off-road environments, these front shocks feature a massive 2.5-inch aluminum body that dissipates heat more effectively than traditional steel, ensuring consistent performance during high-speed desert runs or heavy trail use.

Equipped with an external reservoir system, these shocks increase internal oil volume to prevent cavitation and fade. The 7/8-inch hard chromed shock shafts and redundant seal packs are built to withstand extreme debris and mechanical stress. As part of the Performance Elite series, these units offer Fox's widest range of external adjustability, allowing you to fine-tune your suspension for specific loads, terrain types, and driving styles.

• Part Number: 883-06-199
• Body Material: 6061-T6 hard-anodized aluminum
• Shaft: 7/8-inch hard chrome plated heat-treated alloy steel
• Piston: Race-developed high-flow design
• Adjustability: Wide-range compression adjustment
• Finish: Black anodized CNC-machined aluminum components
• Installation: Vehicle-specific tuning for direct fitment

Fits 2007-2021 Toyota Tundra models (including SR, SR5, Limited, Platinum, 1794 Edition, Nightshade, Trail, and TRD Pro).

FOX Performance Elite Series 2.5 coilover shocks are engineered to level the front of your Toyota Tundra, providing 0 to 2 inches of lift to eliminate factory forward rake without sacrificing droop travel. These shocks feature 2.5-inch 6061-T6 aluminum bodies with Type III hard-anodization for superior corrosion resistance and heat dissipation. The external reservoirs significantly increase oil capacity and utilize Dual Speed Compression (DSC) adjusters, allowing you to fine-tune high- and low-speed compression to accommodate varying loads and terrain.

• Manufacturer Part Number: 883-06-186
• 2.5-inch impact-extruded 6061-T6 aluminum bodies
• Type III hard-anodized finish for extreme durability and wear resistance
• External reservoir system increases oil volume for cooler operation
• Dual Speed Compression (DSC) adjusters for precise damping control
• High-flow velocity-sensitive piston provides consistent stability
• Black anodized CNC-machined 6061-T6 aluminum components
• Application-specific tuning for 2007-2021 Tundra suspension geometry
• Reservoirs strategically mounted to prevent interference with oversized tires at full lock

Fits 2003-2023 Toyota 4Runner, 2007-2014 Toyota FJ Cruiser, and 2003-2009 Lexus GX470.

The FOX Performance Elite Series 2.5 front coilover kit is engineered to provide a 2-3 inch lift, effectively leveling your vehicle's stance by eliminating factory forward rake. This system increases suspension articulation and provides the damping support necessary for rigs equipped with heavy aftermarket accessories. The included Upper Control Arms (UCAs) ensure proper suspension geometry and maximize droop travel for improved off-road performance.

Equipped with Dual Speed Compression (DSC) adjusters, these shocks allow you to fine-tune high- and low-speed compression to match your driving style, cargo load, and terrain. The 2.5-inch Type III hard-anodized aluminum bodies and external reservoirs work together to dissipate heat rapidly, maintaining consistent damping performance during extended off-grid adventures.

• 2.5-inch Type III hard-anodized aluminum bodies for superior corrosion resistance and thermal management
• External reservoir system increases oil capacity to prevent shock fade
• Dual Speed Compression (DSC) adjusters for precise damping control
• High-flow pistons designed for vehicle-specific performance tuning
• Black anodized CNC-machined aluminum components
• Includes heavy-duty Upper Control Arms (UCAs)
• Manufacturer Part Number: 883-06-185

Fits 2021-2026 Ford F-150 Raptor models equipped with Live Valve suspension technology.

Engineered for professional-level off-road performance, the Fox Factory Race Series 3.2 Internal Bypass coil-overs deliver position-sensitive damping that adapts to any terrain. These shocks utilize Fox’s patented internal bypass technology, allowing oil to pass around the piston through specific ports during the “ride zone” for a plush feel, while drastically increasing pressure near the end of the stroke to prevent harsh bottoming during high-velocity impacts.

Integrated with Ford's Live Valve terrain-adaptive system, these coil-overs provide real-time electronic damping adjustments. The addition of the finned “Cactus Cooler” external reservoirs significantly increases oil capacity and surface area for superior heat dissipation during sustained high-speed desert running. The 7/8-inch hard chrome plated heat-treated alloy steel shafts and redundant sealing system ensure long-term durability in the most punishing environments.

• 3.2-inch internal bypass design for position-sensitive damping
• Seamlessly integrates with factory Live Valve electronic control systems
• Finned external reservoirs dissipate heat faster for consistent performance
• CNC-machined 6061-T6 black anodized aluminum components
• 7/8-inch hard chrome plated heat-treated alloy steel shafts
• Dual Speed Compression (DSC) adjusters for fine-tuning
• Manufacturer Part Number: 883-06-183

Fits 2021-2026 Ford F-150 Raptor models.

The Fox Factory Race Series 3.2 Live Valve Internal Bypass coil-overs are designed to deliver uncompromised off-road performance for the Ford Raptor. Utilizing patented internal bypass technology, these shocks allow oil to bypass the piston through specific zones of the stroke, providing a plush ride during normal travel while generating massive damping force to prevent bottoming out during high-speed impacts. This pair integrates seamlessly with the factory Live Valve terrain-adaptive technology, ensuring the suspension reacts in real-time to driver input and terrain changes.

Built for the most demanding environments, these coil-overs feature 3-inch and 2.5-inch aluminum bodies for superior heat management and durability. The finned external "Cactus Cooler" reservoir system maximizes surface area to dissipate heat quickly, maintaining consistent damping performance during long desert runs. Hard-anodized CNC-machined aluminum components and 7/8-inch shafts with redundant seals ensure long-term reliability and brute strength.

• Fits 2021-2026 Ford F-150 Raptor
• 3.2-inch Live Valve Internal Bypass technology
• Dual Speed Compression (DSC) adjustment for fine-tuning
• Finned external reservoir (Cactus Cooler) for rapid heat dissipation
• 3-inch and 2.5-inch aluminum bodies with 7/8-inch shafts
• Black anodized CNC-machined aluminum components
• Performance tuned specifically for the Raptor platform
• Manufacturer Part Number: 883-06-182

Fits select 2019-2025 Ram 1500 4WD models (DT Chassis). These Fox 2.5 Performance Elite Series front coilovers are engineered to provide a 2-3 inch lift while significantly increasing wheel travel and damping control for your vehicle. Featuring a 2.5-inch impact-extruded aluminum body, these shocks dissipate heat more efficiently than standard steel bodies to maintain consistent performance during aggressive off-road use.

The integrated Dual Speed Compression (DSC) adjusters allow you to fine-tune both high-speed and low-speed compression with the turn of a knob, adapting the suspension to specific loads, speeds, and terrain. The external remote reservoir system increases oil and nitrogen capacity for enhanced cooling, while the 7/8-inch hard-chromed shaft and redundant seal pack provide the durability required for extreme environments. These coilovers are fully serviceable and designed for a lifetime of use.

• 2.5-inch smooth bore impact-extruded aluminum body
• Dual Speed Compression (DSC) adjusters for precise high/low speed damping control
• 6.25-inch travel with external remote reservoir for maximum heat dissipation
• 7/8-inch hard-chromed heat-treated alloy steel shaft
• Black-anodized CNC-machined 6061-T6 billet aluminum components
• Race-developed high-flow internal pistons for improved control
• Provides 2-3 inches of front lift height
• Manufacturer Part Number: 883-06-166

Fits 2019-2025 Ram 1500 (including Big Horn, Rebel, TRX, Laramie, and Tradesman models).

Engineered to improve vehicle control and strength, the Fox Performance Elite Series 2.5 front coilover system provides a 2-inch lift height while significantly increasing wheel travel. These coilovers feature an oversized 2.5-inch aluminum body that dissipates heat more efficiently than conventional steel, paired with an external remote reservoir to increase oil volume for fade-free performance in harsh environments.

The integrated Dual Speed Compression (DSC) adjuster allows for precise fine-tuning of your suspension. With a simple turn of the dials, you can adjust high-speed and low-speed compression to account for varied terrain, vehicle loads, and speeds. Built for longevity, the assembly utilizes a 7/8-inch hard-chromed shock shaft and a redundant seal pack for maximum durability in extreme conditions.

• Manufacturer Part Number: 883-06-165
• Lift Height: 2 inches
• Body Material: 2.5-inch impact extruded 6061-T6 aluminum
• Adjustability: DSC (Dual Speed Compression) adjuster
• Reservoir: External remote reservoir for enhanced cooling
• Shaft: 7/8-inch hard chromed, heat-treated alloy steel
• Components: Black-anodized, CNC-machined 6061-T6 aluminum
• Serviceable: Fully rebuildable for a lifetime of use

Fits 2019-2026 Chevrolet Silverado 1500 and GMC Sierra 1500 trucks (including Trail Boss, AT4, and ZR2 trims). Designed for use with 6-inch suspension lift systems to provide 3.5 inches of additional front lift on standard models or 1.5 inches on factory-lifted Trail Boss and AT4 models.

The FOX Performance Elite Series 2.5 remote reservoir coilover is engineered to provide superior damping control and heat management for lifted GM 1500 applications. Featuring a massive 2.5-inch aluminum body, this shock provides significantly higher internal oil volume than factory units, allowing for more consistent performance during high-speed off-road use or when navigating rough terrain. The remote reservoir system further increases oil capacity and cooling surface area, ensuring the race-developed high-flow pistons remain effective even under extreme thermal stress.

Built for durability in harsh environments, these coilovers utilize a 7/8-inch hard chrome-plated shock shaft and a redundant seal pack system to prevent leaks and contamination. The CNC-machined 6061-T6 aluminum components are finished in black anodizing for corrosion resistance and long-term reliability. These shocks are fully serviceable, allowing for a lifetime of use through professional rebuilding and re-valving.

• Body: 2.5-inch impact extruded and CNC machined 6061-T6 clear-anodized aluminum
• Shaft: 7/8-inch hard chrome-plated, heat-treated alloy steel
• Piston: Race-developed high-flow design
• Reservoir: External remote reservoir system for maximum heat dissipation
• Adjustment: Specifically tuned for vehicle-specific performance and load management
• Manufacturer Part Number: 883-06-162

Fits select 2019-2026 Chevrolet Silverado 1500 and GMC Sierra 1500 trucks (including Limited/LTD). Note: Provides 0-2" lift on standard models; maintains factory ride height (0" lift) on Trail Boss, AT4, ZR2, and AT4X models.

The Fox 2.5 Series Performance Elite remote reservoir coilover system is engineered to significantly increase wheel travel and damping control for late-model GM 1500 trucks. Built with a 2.5-inch smooth bore aluminum body, these shocks dissipate heat faster than traditional steel alternatives, ensuring consistent performance during high-speed off-road use. The external reservoir increases oil capacity to further manage thermal loads, while the race-developed high-flow pistons provide a plush ride on the street and firm control through the rough.

Built for durability in harsh environments, these coilovers feature 7/8-inch hard chromed heat-treated alloy steel shafts and a redundant seal pack system to prevent contamination. The CNC-machined 6061-T6 aluminum components are finished in black anodizing for superior corrosion resistance. These units are fully serviceable, allowing for custom tuning and a lifetime of reliable performance.

• 2.5-inch impact extruded and CNC-machined 6061-T6 aluminum body
• External reservoir design for increased oil volume and heat dissipation
• 7/8-inch hard chromed heat-treated alloy steel shock shaft
• Race-developed high-flow piston design
• Black-anodized CNC-machined aluminum components
• Application-specific valving for maximum performance
• Manufacturer Part Number: 883-06-157

Fits 2019-2023 Ford Ranger XL, XLT, and Lariat.

Fox 2.5 Factory Series Coilover Reservoir shocks provide the damping control and heat dissipation required for aggressive off-road use. Engineered for a 2-3" lift, these coilovers increase wheel travel and durability compared to factory struts. The external reservoir system significantly increases internal oil capacity, allowing the high-flow race pistons to maintain consistent performance by dissipating heat more efficiently during high-speed runs or technical trails.

Constructed with a 2.5-inch smooth bore zinc-plated alloy body and a 7/8-inch hard chromed heat-treated shaft, these coilovers are built to withstand harsh environments. The redundant seal pack system ensures long-term reliability, while the black-anodized CNC-machined aluminum components provide a corrosion-resistant finish. These units are fully serviceable, allowing for custom valving or rebuilding over the life of the vehicle.

• MPN: 883-06-156
• Lift Height: 2-3 inches
• Bore Diameter: 2.5 inches
• Shaft Diameter: 7/8-inch hard chrome plated alloy steel
• Body Material: Zinc-plated seamless alloy
• Components: Black-anodized 6061-T6 CNC-machined aluminum
• Reservoir: External system for increased cooling
• Adjustable damping for varied terrain and loads

Fits 2019-2020 Ford F-150 Raptor. This front coilover system utilizes FOX’s patented internal bypass technology to provide position-sensitive damping, delivering a smooth ride in the comfort zone while generating massive bottom-out resistance at the end of the stroke.

Integrated with Ford's Live Valve Terrain Adaptive Technology, these shocks adjust damping in real-time based on sensor inputs to optimize control across varying terrain. The system features a 3.0-inch zinc-plated seamless alloy body and a finned external reservoir to rapidly dissipate heat during high-speed desert runs, maintaining consistent performance under extreme conditions.

• Manufacturer Part Number: 883-06-153
• Internal bypass technology for position-sensitive damping
• 7/8-inch 17-4 H900 stainless steel shafts with redundant sealing system
• Black anodized CNC-machined 6061-T6 aluminum components
• Finned external reservoir system for maximum heat dissipation
• ORB O-ring port fittings for a superior, leak-free seal
• Teflon-lined, heat-treated spherical bearings
• 100% serviceable and tunable for long-term use

Fits 2017-2018 Ford F-150 Raptor models.

The Fox Factory Series 3.0 Internal Bypass Front Coilover Set delivers race-proven damping technology to the 2017-2018 Ford Raptor. These shocks utilize a patented internal bypass design, allowing for position-sensitive damping that provides a plush ride in the central "ride zone" while ramping up force at the end of the stroke to prevent harsh bottoming. The 3.0-inch diameter zinc-plated seamless alloy bodies offer increased oil capacity for superior heat management during aggressive off-road use.

Equipped with Dual Speed Compression (DSC) adjusters, these coilovers allow you to fine-tune high-speed and low-speed compression independently to account for vehicle load, terrain, and driving style. The remote reservoirs are connected via ORB O-ring port fittings for a reliable seal and efficient heat dissipation.

• Bore Size: 3.0-inch diameter bodies with 7.9-inch travel
• Shaft Material: 17-4 H900 stainless steel, 7/8-inch diameter with redundant sealing system
• Adjustability: Dual Speed Compression (DSC) high and low-speed external adjusters
• Construction: Black anodized CNC-machined 6061-T6 aluminum components
• Bearings: Teflon-lined heat-treated spherical bearings
• Finish: Durable zinc-plated seamless alloy body
• Manufacturer Part Number: 883-06-140

Fits select 2015-2022 Chevrolet Colorado and GMC Canyon models (4WD). This Fox 2.5 Factory Series Coilover Set delivers race-proven performance with the versatility of an adjustable lift height and Dual Speed Compression (DSC) tuning. Engineered for off-road dominance, these coilovers utilize Fox’s patented internal bypass technology, which allows oil to bypass the piston at specific points in the stroke for a smooth ride during normal travel, while building significant pressure to prevent bottoming out during high-impact events.

The external remote reservoir system increases oil capacity to dissipate heat faster during aggressive driving. With the integrated DSC adjusters, you can manually fine-tune your suspension for varying weight loads, terrain, and speeds without tools. Constructed with 2.5-inch zinc-plated alloy bodies and 7/8-inch hard chrome-plated shafts, these coilovers are fully serviceable and designed for a lifetime of hard use.

• Provides 0-2 inches of front suspension lift
• 2.5" Smooth bore zinc-plated seamless alloy body
• External reservoir design for superior heat dissipation
• DSC (Dual Speed Compression) adjusters for high- and low-speed compression tuning
• 7/8" Hard chrome-plated heat-treated alloy steel shaft
• Redundant sealing pack system (main seal, wiper seal, scraper seal)
• Teflon-lined, heat-treated spherical bearings
• Black-anodized, CNC-machined 6061-T6 billet aluminum components
• Manufacturer Part Number: 883-06-133

Fits select 2014-2020 Ford F-150 4WD models. These FOX 2.5 Factory Series coilovers provide significant damping improvements for both on-road stability and aggressive off-road use, offering an adjustable lift height of 0-2 inches.

Built with race-proven internal bypass technology, these shocks utilize a 2.5-inch seamless alloy body to increase oil capacity and cooling. The external remote reservoir further enhances heat dissipation to prevent fade during sustained high-speed use. This set features the Dual Speed Compression (DSC) adjuster, allowing you to independently fine-tune high-speed and low-speed compression to account for vehicle weight, terrain, and driving style.

• Part Number: 883-06-132
• Travel: 5.35 inches
• Body: 2.5-inch zinc-plated seamless alloy
• Shafts: 7/8-inch hard chrome plated heat-treated alloy steel
• Reservoir: External aluminum remote reservoir
• Adjustment: DSC (Dual Speed Compression) adjusters
• Bearings: PTFE-lined, heat-treated spherical bearings
• Components: Black anodized 6061-T6 CNC-machined aluminum
• Valving: Application-specific, tunable, and fully serviceable

Fits select 2007-2019 Chevrolet Silverado 1500, Suburban, Tahoe, and GMC Sierra 1500, Yukon, and Yukon XL (refer to fitment chart for specific submodel compatibility).

The FOX 2.5 Factory Series Internal Bypass coilover set delivers race-developed technology in a bolt-on package designed for the harshest environments. Utilizing patented internal bypass technology, these shocks feature a dedicated ride zone that allows oil to bypass the piston for a compliant ride during standard travel, while ramping up pressure at the end of the stroke to maintain control and prevent bottoming out. The external remote reservoir system significantly increases oil and nitrogen capacity for superior heat dissipation during aggressive off-road use.

Equipped with Dual Speed Compression (DSC) adjusters, these coilovers offer 12 levels of low-speed and 10 levels of high-speed compression tuning. This allows you to fine-tune your suspension for varying weight loads, terrain, and speed without the need for specialized tools.

• MPN: 883-06-121
• Lift Height: Adjustable 0-2 inches
• Travel: 4.4-inch stroke
• Shock Body: 2.5-inch zinc-plated seamless alloy with internal bypass tech
• Shaft: 7/8-inch hard chrome plated heat-treated alloy steel
• Components: Black-anodized CNC machined 6061-T6 aluminum
• Bearings: Teflon-lined, heat-treated spherical bearings
• Adjustment: Tool-free high and low-speed compression adjustment via DSC
• Serviceability: 100% serviceable and tunable for long-term performance