Injen Technology has done it once again with this new short ram air intake for the 2018-2021 Subaru WRX STI Equipped with the H4-2.5L Turbo Engine. The Injen Technology SP1208 performance air intake system is the result of countless hours invested in research and development to provide a proven intake system designed to add power and performance to your STI. The Injen Technology SP1208 intake system is a direct replacement for that restrictive factory airbox and provides a engineered solution that allows that turbo to breathe deeply and produce it's full power potential with a simple drop-in install. To top it all off, no tune is required to get the power numbers noted!

• Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Injen's MR Technology provides massive power gains while maintaining A/F ratios
• Includes custom heat shield specifically designed for this application
• Smooth intake piping eliminates restrictions and improves airflow
• Dyno Proven gains of up to 26 hp and 24 lb-ft. of torque
• No additional tuning required and no check engine lights
• Huge 3.250in mandrel-bent 6061-T6 aluminum intake tubing
• Fully serviceable Injen SuperNano-Web dry air filter
• Features Injen's patented MegaRam (MR) Technology
• Replacement air filter part number X-1059-BB
• Aggressive engine tone under full throttle
• Injen Technology Limited Lifetime Warranty
• Optional Hydroshield part number 1040BLK
• Made in Pomona California, USA
• Available in multiple finishes
• Short Ram Air Intake Design
• SP1208WB (Wrinkle Black)
• SP1208WR (Wrinkle Red)
• SP1208P (Polished)

This Part Fits:

Is your engine choking for air and in need of some additional horsepower? If so, Injen has exciting news for you! The SP series of cold air intakes from Injen Technology will allow your engine to breathe deeper and enhance the performance that you've been craving. The SP series of cold air intakes is Injen's flagship system in their lines of traditional aluminum cold air intake systems. Injen Technology is the world's first tuned air intake system and holds four (4) patents on the tuning process of an intake system ? something no other manufacturer can claim. The SP series of cold air intakes feature many of Injen Technology's patented tuning process, including MegaRam (MR) Technology (Patents 7,359,795 and 7,669,571), Air Fusion (Patents 7,757,548 and 7,721,699), and many other innovations that keep Injen Technology at the forefront in the performance aftermarket. , , The soul of this intake is found within 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Our engineers have painstakingly designed the intake to provide the highest levels of safe power, along with clean aesthetics that will impress every time you open your hood. In addition to the impressive power increase, the Injen team has ensured that a safe Air fuel (A/F) ratio has been maintained throughout the power band. , , Additionally, this SP intake includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area allowing for greater airflow and unbeatable filtration. If that's not enough, the Injen SP performance intake provides power you can hear and feel! This intake provides an aggressive and throaty tone that is unmatched in the aftermarket. Want to add that personalized touch to your intake? You're in luck, as Injen also offers this intake system in multiple finishes. To top it all off, this SP CAI kit includes the unbeatable Injen Technology limited Lifetime Warranty!

• This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Includes custom heat shield specifically designed for this application
• Smooth intake piping eliminates restrictions and improves airflow
• Dyno Proven gains of up to 24 hp and 24 lb-ft. of torque
• Fully serviceable Injen SuperNano-Web dry air filter
• Provides power gains while maintaining A/F ratios
• Features Injen's patented Air Fusion Technology
• Replacement air filter part number X-1059-BB
• Aggressive engine tone under full throttle
• Injen Technology Limited Lifetime Warranty
• Increased Torque Up To 24 ft./lbs.
• 6061-T6 aluminum intake tubing
• Available in multiple finishes
• Made in Pomona, California USA
• No additional tuning required
• Cold Air Intake Design

This Part Fits:

Is your engine choking for air and in need of some additional horsepower? If so, Injen has exciting news for you! The SP series of cold air intakes from Injen Technology will allow your engine to breathe deeper and enhance the performance that you've been craving. The SP series of cold air intakes is Injen's flagship system in their lines of traditional aluminum cold air intake systems. Injen Technology is the world's first tuned air intake system and holds four (4) patents on the tuning process of an intake system ? something no other manufacturer can claim. The SP series of cold air intakes feature many of Injen Technology's patented tuning process, including MegaRam (MR) Technology (Patents 7,359,795 and 7,669,571), Air Fusion (Patents 7,757,548 and 7,721,699), and many other innovations that keep Injen Technology at the forefront in the performance aftermarket. , , The soul of this intake is found within 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Our engineers have painstakingly designed the intake to provide the highest levels of safe power, along with clean aesthetics that will impress every time you open your hood. In addition to the impressive power increase, the Injen team has ensured that a safe Air fuel (A/F) ratio has been maintained throughout the power band. , , Additionally, this SP intake includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area allowing for greater airflow and unbeatable filtration. If that's not enough, the Injen SP performance intake provides power you can hear and feel! This intake provides an aggressive and throaty tone that is unmatched in the aftermarket. Want to add that personalized touch to your intake? You're in luck, as Injen also offers this intake system in multiple finishes. To top it all off, this SP CAI kit includes the unbeatable Injen Technology limited Lifetime Warranty!

• Includes custom heat shield specifically designed for this application
• Smooth intake piping eliminates restrictions and improves airflow
• Dyno Proven gains of up to 33 hp and 32 lb-ft. of torque
• Fully serviceable Injen SuperNano-Web dry air filter
• Optional hydroshield part number 1033BLK or 1033RED
• Provides power gains while maintaining A/F ratios
• Features Injen's patented Air Fusion Technology
• Replacement air filter part number X-1013-BB
• Aggressive engine tone under full throttle
• Injen Technology Limited Lifetime Warranty
• Increased Torque Up To 32.2 ft./lbs.
• 6061-T6 aluminum intake tubing
• Available in multiple finishes
• Made in Pomona, California USA
• No additional tuning required
• Cold Air Intake Design
• CARB EO #: D-476-8

This Part Fits:

Is your engine choking for air and in need of some additional horsepower? If so, Injen has exciting news for you! The SP series of cold air intakes from Injen Technology will allow your engine to breathe deeper and enhance the performance that you've been craving. The SP series of cold air intakes is Injen's flagship system in their lines of traditional aluminum cold air intake systems. Injen Technology is the world's first tuned air intake system and holds four (4) patents on the tuning process of an intake system ? something no other manufacturer can claim. The SP series of cold air intakes feature many of Injen Technology's patented tuning process, including MegaRam (MR) Technology (Patents 7,359,795 and 7,669,571), Air Fusion (Patents 7,757,548 and 7,721,699), and many other innovations that keep Injen Technology at the forefront in the performance aftermarket. , , The soul of this intake is found within 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Our engineers have painstakingly designed the intake to provide the highest levels of safe power, along with clean aesthetics that will impress every time you open your hood. In addition to the impressive power increase, the Injen team has ensured that a safe Air fuel (A/F) ratio has been maintained throughout the power band. , , Additionally, this SP intake includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area allowing for greater airflow and unbeatable filtration. If that's not enough, the Injen SP performance intake provides power you can hear and feel! This intake provides an aggressive and throaty tone that is unmatched in the aftermarket. Want to add that personalized touch to your intake? You're in luck, as Injen also offers this intake system in multiple finishes. To top it all off, this SP CAI kit includes the unbeatable Injen Technology limited Lifetime Warranty!

• Includes custom heat shield specifically designed for this application
• Smooth intake piping eliminates restrictions and improves airflow
• Dyno Proven gains of up to 33 hp and 32 lb-ft. of torque
• Fully serviceable Injen SuperNano-Web dry air filter
• Optional hydroshield part number 1033BLK or 1033RED
• Provides power gains while maintaining A/F ratios
• Features Injen's patented Air Fusion Technology
• Replacement air filter part number X-1013-BB
• Aggressive engine tone under full throttle
• Injen Technology Limited Lifetime Warranty
• Increased Torque Up To 32.2 ft./lbs.
• 6061-T6 aluminum intake tubing
• Available in multiple finishes
• Made in Pomona, California USA
• No additional tuning required
• Cold Air Intake Design
• CARB EO #: D-476-8

This Part Fits:

The Injen Technology engineers spent abundant amounts of time designing, testing, and perfecting this performance Cold Air Intake system to develop some serious bolt-on power. The soul of this Cold Air Intake system is with our smooth, mandrel-bent, over-sized 4.00" O.D. T6-6061 aluminum tube that provides a smooth, uninterrupted path for highly efficient airflow and a look that will impress every time you open your hood! Not only that, but this performance intake system put down an additional 19hp and 18 lb-ft of torque on the chassis dyno! That's performance that you can feel and hear!!

• Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Available in Polished (SP1140P), Wrinkle Black (SP1140WB), and Wrinkle Red (SP1140WR)
• Manufactured from massive 4.00" O.D. 6061-T6 Mandrel-Bent Aluminum Tubing
• Includes custom heat shield specifically designed for this application
• Replacement air filter # X-1026-BB (Dry) or X-1026-BR (Oiled Cotton)
• Smooth intake piping eliminates restrictions and improves airflow
• Aggressive under hood appearance while maintaining an OE fit
• Dyno Proven gains of up to 19 hp and 18 lb-ft. of torque
• Fully serviceable Injen SuperNano-Web dry air filter
• Work with stock tune. No additional tuning required
• Optional Hydroshield part number 1037BLK or 1037RED
• Provides power gains while maintaining A/F ratios
• Hand-TIG welded for precious and beautiful welds
• Made in Pomona California, USA headquarters
• Injen Technology Limited Lifetime Warranty
• Aggressive engine tone under full throttle

This Part Fits:

The Injen Technology engineers spent abundant amounts of time designing, testing, and perfecting this performance Cold Air Intake system to develop some serious bolt-on power. The soul of this Cold Air Intake system is with our smooth, mandrel-bent, over-sized 4.00" O.D. T6-6061 aluminum tube that provides a smooth, uninterrupted path for highly efficient airflow and a look that will impress every time you open your hood! Not only that, but this performance intake system put down an additional 19hp and 18 lb-ft of torque on the chassis dyno! That's performance that you can feel and hear!!

• Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Available in Polished (SP1140P), Wrinkle Black (SP1140WB), and Wrinkle Red (SP1140WR)
• Manufactured from massive 4.00" O.D. 6061-T6 Mandrel-Bent Aluminum Tubing
• Includes custom heat shield specifically designed for this application
• Replacement air filter # X-1026-BB (Dry) or X-1026-BR (Oiled Cotton)
• Smooth intake piping eliminates restrictions and improves airflow
• Aggressive under hood appearance while maintaining an OE fit
• Dyno Proven gains of up to 19 hp and 18 lb-ft. of torque
• Work with stock tune. No additional tuning required
• Fully serviceable Injen SuperNano-Web dry air filter
• Optional Hydroshield part number 1037BLK or 1037RED
• Provides power gains while maintaining A/F ratios
• Hand-TIG welded for precious and beautiful welds
• Made in Pomona California, USA headquarters
• Aggressive engine tone under full throttle
• Injen Technology Limited Lifetime Warranty

This Part Fits:

Is your engine choking for air and in need of some additional horsepower? If so, Injen has exciting news for you! The SP series of cold air intakes from Injen Technology will allow your engine to breathe deeper and enhance the performance that you've been craving. The SP series of cold air intakes is Injen's flagship system in their lines of traditional aluminum cold air intake systems. Injen Technology is the world's first tuned air intake system and holds four (4) patents on the tuning process of an intake system ? something no other manufacturer can claim. The SP series of cold air intakes feature many of Injen Technology's patented tuning process, including MegaRam (MR) Technology (Patents 7,359,795 and 7,669,571), Air Fusion (Patents 7,757,548 and 7,721,699), and many other innovations that keep Injen Technology at the forefront in the performance aftermarket. , , The soul of this intake is found within 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Our engineers have painstakingly designed the intake to provide the highest levels of safe power, along with clean aesthetics that will impress every time you open your hood. In addition to the impressive power increase, the Injen team has ensured that a safe Air fuel (A/F) ratio has been maintained throughout the power band. , , Additionally, this SP intake includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area allowing for greater airflow and unbeatable filtration. If that's not enough, the Injen SP performance intake provides power you can hear and feel! This intake provides an aggressive and throaty tone that is unmatched in the aftermarket. Want to add that personalized touch to your intake? You're in luck, as Injen also offers this intake system in multiple finishes. To top it all off, this SP CAI kit includes the unbeatable Injen Technology limited Lifetime Warranty!

• This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Includes custom heat shield specifically designed for this application
• Smooth intake piping eliminates restrictions and improves airflow
• Dyno Proven gains of up to 14 hp and 13 lb-ft. of torque
• Fully serviceable Injen SuperNano-Web dry air filter
• Features Injen's patented MegaRam (MR) Technology
• Provides power gains while maintaining A/F ratios
• Replacement air filter part number X-1059-BB
• Aggressive engine tone under full throttle
• Injen Technology Limited Lifetime Warranty
• Increased Torque Up To 13 ft./lbs.
• 6061-T6 aluminum intake tubing
• Available in multiple finishes
• Made in Pomona California, USA
• No additional tuning required
• Short Ram Air Intake Design

This Part Fits:

Is your engine choking for air and in need of some additional horsepower? If so, Injen has exciting news for you! The SP series of cold air intakes from Injen Technology will allow your engine to breathe deeper and enhance the performance that you've been craving. The SP series of cold air intakes is Injen's flagship system in their lines of traditional aluminum cold air intake systems. Injen Technology is the world's first tuned air intake system and holds four (4) patents on the tuning process of an intake system ? something no other manufacturer can claim. The SP series of cold air intakes feature many of Injen Technology's patented tuning process, including MegaRam (MR) Technology (Patents 7,359,795 and 7,669,571), Air Fusion (Patents 7,757,548 and 7,721,699), and many other innovations that keep Injen Technology at the forefront in the performance aftermarket. , , The soul of this intake is found within 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Our engineers have painstakingly designed the intake to provide the highest levels of safe power, along with clean aesthetics that will impress every time you open your hood. In addition to the impressive power increase, the Injen team has ensured that a safe Air fuel (A/F) ratio has been maintained throughout the power band. , , Additionally, this SP intake includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area allowing for greater airflow and unbeatable filtration. If that's not enough, the Injen SP performance intake provides power you can hear and feel! This intake provides an aggressive and throaty tone that is unmatched in the aftermarket. Want to add that personalized touch to your intake? You're in luck, as Injen also offers this intake system in multiple finishes. To top it all off, this SP CAI kit includes the unbeatable Injen Technology limited Lifetime Warranty!

• This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Includes custom heat shield w/cover specifically designed for this application
• Smooth intake piping eliminates restrictions and improves airflow
• Dyno Proven gains of up to 13 hp and 11 lb-ft. of torque
• Fully serviceable Injen SuperNano-Web dry air filter
• Optional hydroshield part number 1037BLK or 1037RED
• Provides power gains while maintaining A/F ratios
• Replacement air filter part number X-1021-BB
• Aggressive engine tone under full throttle
• Injen Technology Limited Lifetime Warranty
• Does NOT fit the 2013 M135i E82 chassis.
• Increased Torque Up To 11 ft./lbs.
• 6061-T6 aluminum intake tubing
• Available in multiple finishes
• Made in Pomona, California USA
• No additional tuning required
• Short Ram Air Intake Design

This Part Fits:

Is your engine choking for air and in need of some additional horsepower? If so, Injen has exciting news for you! The SP series of cold air intakes from Injen Technology will allow your engine to breathe deeper and enhance the performance that you've been craving. The SP series of cold air intakes is Injen's flagship system in their lines of traditional aluminum cold air intake systems. Injen Technology is the world's first tuned air intake system and holds four (4) patents on the tuning process of an intake system ? something no other manufacturer can claim. The SP series of cold air intakes feature many of Injen Technology's patented tuning process, including MegaRam (MR) Technology (Patents 7,359,795 and 7,669,571), Air Fusion (Patents 7,757,548 and 7,721,699), and many other innovations that keep Injen Technology at the forefront in the performance aftermarket. , , The soul of this intake is found within 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Our engineers have painstakingly designed the intake to provide the highest levels of safe power, along with clean aesthetics that will impress every time you open your hood. In addition to the impressive power increase, the Injen team has ensured that a safe Air fuel (A/F) ratio has been maintained throughout the power band. , , Additionally, this SP intake includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area allowing for greater airflow and unbeatable filtration. If that's not enough, the Injen SP performance intake provides power you can hear and feel! This intake provides an aggressive and throaty tone that is unmatched in the aftermarket. Want to add that personalized touch to your intake? You're in luck, as Injen also offers this intake system in multiple finishes. To top it all off, this SP CAI kit includes the unbeatable Injen Technology limited Lifetime Warranty!

• This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Includes custom heat shield w/cover specifically designed for this application
• Smooth intake piping eliminates restrictions and improves airflow
• Dyno Proven gains of up to 13 hp and 11 lb-ft. of torque
• Fully serviceable Injen SuperNano-Web dry air filter
• Optional hydroshield part number 1037BLK or 1037RED
• Provides power gains while maintaining A/F ratios
• Replacement air filter part number X-1021-BB
• Aggressive engine tone under full throttle
• Injen Technology Limited Lifetime Warranty
• Does NOT fit the 2013 M135i E82 chassis.
• Increased Torque Up To 11 ft./lbs.
• 6061-T6 aluminum intake tubing
• Available in multiple finishes
• Made in Pomona, California USA
• No additional tuning required
• Short Ram Air Intake Design

This Part Fits:

Is your engine choking for air and in need of some additional horsepower? If so, Injen has exciting news for you! The SP series of cold air intakes from Injen Technology will allow your engine to breathe deeper and enhance the performance that you've been craving. The SP series of cold air intakes is Injen's flagship system in their lines of traditional aluminum cold air intake systems. Injen Technology is the world's first tuned air intake system and holds four (4) patents on the tuning process of an intake system ? something no other manufacturer can claim. The SP series of cold air intakes feature many of Injen Technology's patented tuning process, including MegaRam (MR) Technology (Patents 7,359,795 and 7,669,571), Air Fusion (Patents 7,757,548 and 7,721,699), and many other innovations that keep Injen Technology at the forefront in the performance aftermarket. , , The soul of this intake is found within 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Our engineers have painstakingly designed the intake to provide the highest levels of safe power, along with clean aesthetics that will impress every time you open your hood. In addition to the impressive power increase, the Injen team has ensured that a safe Air fuel (A/F) ratio has been maintained throughout the power band. , , Additionally, this SP intake includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area allowing for greater airflow and unbeatable filtration. If that's not enough, the Injen SP performance intake provides power you can hear and feel! This intake provides an aggressive and throaty tone that is unmatched in the aftermarket. Want to add that personalized touch to your intake? You're in luck, as Injen also offers this intake system in multiple finishes. To top it all off, this SP CAI kit includes the unbeatable Injen Technology limited Lifetime Warranty!

• Fully functional ram air scoop directs cool air into the air filter
• Smooth intake piping eliminates restrictions and improves airflow
• Dyno Proven gains of up to 15 hp and 18 lb-ft. of torque
• Fully serviceable Injen SuperNano-Web dry air filter
• Optional hydroshield part number 1037BLK or 1037RED
• Provides power gains while maintaining A/F ratios
• Features Injen's patented Air Fusion Technology
• CARB EO # applies to 2011-2012 model years only
• Replacement air filter part number X-1021-BB
• Aggressive engine tone under full throttle
• Injen Technology Limited Lifetime Warranty
• Increased Torque Up To 18 ft./lbs.
• 6061-T6 aluminum intake tubing
• Available in multiple finishes
• Made in Pomona, California USA
• No additional tuning required
• Short Ram Air Intake Design
• CARB EO #: D-476-8

This Part Fits:

Is your engine choking for air and in need of some additional horsepower? If so, Injen has exciting news for you! The SP series of cold air intakes from Injen Technology will allow your engine to breathe deeper and enhance the performance that you've been craving. The SP series of cold air intakes is Injen's flagship system in their lines of traditional aluminum cold air intake systems. Injen Technology is the world's first tuned air intake system and holds four (4) patents on the tuning process of an intake system ? something no other manufacturer can claim. The SP series of cold air intakes feature many of Injen Technology's patented tuning process, including MegaRam (MR) Technology (Patents 7,359,795 and 7,669,571), Air Fusion (Patents 7,757,548 and 7,721,699), and many other innovations that keep Injen Technology at the forefront in the performance aftermarket. , , The soul of this intake is found within 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Our engineers have painstakingly designed the intake to provide the highest levels of safe power, along with clean aesthetics that will impress every time you open your hood. In addition to the impressive power increase, the Injen team has ensured that a safe Air fuel (A/F) ratio has been maintained throughout the power band. , , Additionally, this SP intake includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area allowing for greater airflow and unbeatable filtration. If that's not enough, the Injen SP performance intake provides power you can hear and feel! This intake provides an aggressive and throaty tone that is unmatched in the aftermarket. Want to add that personalized touch to your intake? You're in luck, as Injen also offers this intake system in multiple finishes. To top it all off, this SP CAI kit includes the unbeatable Injen Technology limited Lifetime Warranty!

• Fully functional ram air scoop directs cool air into the air filter
• Smooth intake piping eliminates restrictions and improves airflow
• Dyno Proven gains of up to 15 hp and 18 lb-ft. of torque
• Fully serviceable Injen SuperNano-Web dry air filter
• Optional hydroshield part number 1037BLK or 1037RED
• Provides power gains while maintaining A/F ratios
• Features Injen's patented Air Fusion Technology
• CARB EO # applies to 2011-2012 model years only
• Replacement air filter part number X-1021-BB
• Aggressive engine tone under full throttle
• Injen Technology Limited Lifetime Warranty
• Increased Torque Up To 18 ft./lbs.
• 6061-T6 aluminum intake tubing
• Available in multiple finishes
• Made in Pomona, California USA
• No additional tuning required
• Short Ram Air Intake Design
• CARB EO #: D-476-8

This Part Fits:

Is your engine choking for air and in need of some additional horsepower? If so, Injen has exciting news for you! The SP series of cold air intakes from Injen Technology will allow your engine to breathe deeper and enhance the performance that you've been craving. The SP series of cold air intakes is Injen's flagship system in their lines of traditional aluminum cold air intake systems. Injen Technology is the world's first tuned air intake system and holds four (4) patents on the tuning process of an intake system ? something no other manufacturer can claim. The SP series of cold air intakes feature many of Injen Technology's patented tuning process, including MegaRam (MR) Technology (Patents 7,359,795 and 7,669,571), Air Fusion (Patents 7,757,548 and 7,721,699), and many other innovations that keep Injen Technology at the forefront in the performance aftermarket. , , The soul of this intake is found within 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Our engineers have painstakingly designed the intake to provide the highest levels of safe power, along with clean aesthetics that will impress every time you open your hood. In addition to the impressive power increase, the Injen team has ensured that a safe Air fuel (A/F) ratio has been maintained throughout the power band. , , Additionally, this SP intake includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area allowing for greater airflow and unbeatable filtration. If that's not enough, the Injen SP performance intake provides power you can hear and feel! This intake provides an aggressive and throaty tone that is unmatched in the aftermarket. Want to add that personalized touch to your intake? You're in luck, as Injen also offers this intake system in multiple finishes. To top it all off, this SP CAI kit includes the unbeatable Injen Technology limited Lifetime Warranty!

• CARB EO # Excludes SULEV Vehicles with test group numbeer 7BMXV03.0N51 & 8BMXV03.0N51
• Fully functional ram air scoop directs cool air into the air filter
• Smooth intake piping eliminates restrictions and improves airflow
• Dyno Proven gains of up to 13 hp and 12 lb-ft. of torque
• Fully serviceable Injen SuperNano-Web dry air filter
• Optional hydroshield part number 1035BLK or 1035RED
• Features Injen's patented MegaRam (MR) Technology
• Provides power gains while maintaining A/F ratios
• Replacement air filter part number X-1017-BB
• Aggressive engine tone under full throttle
• Injen Technology Limited Lifetime Warranty
• Excludes vehicles with active steering
• Increased Torque Up To 12.2 ft./lbs.
• 6061-T6 aluminum intake tubing
• Available in multiple finishes
• Made in Pomona, California USA
• No additional tuning required
• Short Ram Air Intake Design
• CARB EO #: D-476-8

This Part Fits:

Is your engine choking for air and in need of some additional horsepower? If so, Injen has exciting news for you! The SP series of cold air intakes from Injen Technology will allow your engine to breathe deeper and enhance the performance that you've been craving. The SP series of cold air intakes is Injen's flagship system in their lines of traditional aluminum cold air intake systems. Injen Technology is the world's first tuned air intake system and holds four (4) patents on the tuning process of an intake system ? something no other manufacturer can claim. The SP series of cold air intakes feature many of Injen Technology's patented tuning process, including MegaRam (MR) Technology (Patents 7,359,795 and 7,669,571), Air Fusion (Patents 7,757,548 and 7,721,699), and many other innovations that keep Injen Technology at the forefront in the performance aftermarket. , , The soul of this intake is found within 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Our engineers have painstakingly designed the intake to provide the highest levels of safe power, along with clean aesthetics that will impress every time you open your hood. In addition to the impressive power increase, the Injen team has ensured that a safe Air fuel (A/F) ratio has been maintained throughout the power band. , , Additionally, this SP intake includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area allowing for greater airflow and unbeatable filtration. If that's not enough, the Injen SP performance intake provides power you can hear and feel! This intake provides an aggressive and throaty tone that is unmatched in the aftermarket. Want to add that personalized touch to your intake? You're in luck, as Injen also offers this intake system in multiple finishes. To top it all off, this SP CAI kit includes the unbeatable Injen Technology limited Lifetime Warranty!

• CARB EO # Excludes SULEV Vehicles with test group numbeer 7BMXV03.0N51 & 8BMXV03.0N51
• Fully functional ram air scoop directs cool air into the air filter
• Smooth intake piping eliminates restrictions and improves airflow
• Dyno Proven gains of up to 13 hp and 12 lb-ft. of torque
• Fully serviceable Injen SuperNano-Web dry air filter
• Optional hydroshield part number 1035BLK or 1035RED
• Features Injen's patented MegaRam (MR) Technology
• Provides power gains while maintaining A/F ratios
• Replacement air filter part number X-1017-BB
• Injen Technology Limited Lifetime Warranty
• Aggressive engine tone under full throttle
• Excludes vehicles with active steering
• Increased Torque Up To 12.2 ft./lbs.
• 6061-T6 aluminum intake tubing
• Available in multiple finishes
• Made in Pomona, California USA
• No additional tuning required
• Short Ram Air Intake Design
• CARB EO #: D-476-8

This Part Fits:

Is your engine choking for air and in need of some additional horsepower? If so, Injen has exciting news for you! The SP series of cold air intakes from Injen Technology will allow your engine to breathe deeper and enhance the performance that you've been craving. The SP series of cold air intakes is Injen's flagship system in their lines of traditional aluminum cold air intake systems. Injen Technology is the world's first tuned air intake system and holds four (4) patents on the tuning process of an intake system ? something no other manufacturer can claim. The SP series of cold air intakes feature many of Injen Technology's patented tuning process, including MegaRam (MR) Technology (Patents 7,359,795 and 7,669,571), Air Fusion (Patents 7,757,548 and 7,721,699), and many other innovations that keep Injen Technology at the forefront in the performance aftermarket. , , The soul of this intake is found within 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Our engineers have painstakingly designed the intake to provide the highest levels of safe power, along with clean aesthetics that will impress every time you open your hood. In addition to the impressive power increase, the Injen team has ensured that a safe Air fuel (A/F) ratio has been maintained throughout the power band. , , Additionally, this SP intake includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area allowing for greater airflow and unbeatable filtration. If that's not enough, the Injen SP performance intake provides power you can hear and feel! This intake provides an aggressive and throaty tone that is unmatched in the aftermarket. Want to add that personalized touch to your intake? You're in luck, as Injen also offers this intake system in multiple finishes. To top it all off, this SP CAI kit includes the unbeatable Injen Technology limited Lifetime Warranty!

• This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Includes custom heat shield specifically designed for this application
• Smooth intake piping eliminates restrictions and improves airflow
• Fits the above applications equipped with the B46/B48 engine
• Dyno Proven gains of up to 13 hp and 12 lb-ft. of torque
• Fully serviceable Injen SuperNano-Web dry air filter
• Features Injen's patented MegaRam (MR) Technology
• Provides power gains while maintaining A/F ratios
• Features Injen's patented Air Fusion Technology
• Mandrel Bent 6061-T6 Aluminum Induction Tube
• Replacement air filter part number X-1105-BB
• Aggressive engine tone under full throttle
• Injen Technology Limited Lifetime Warranty
• 6061-T6 aluminum intake tubing
• Available in multiple finishes
• Made in Pomona, California USA
• No additional tuning required
• Short Ram Air Intake Design

This Part Fits:

Is your engine choking for air and in need of some additional horsepower? If so, Injen has exciting news for you! The SP series of cold air intakes from Injen Technology will allow your engine to breathe deeper and enhance the performance that you've been craving. The SP series of cold air intakes is Injen's flagship system in their lines of traditional aluminum cold air intake systems. Injen Technology is the world's first tuned air intake system and holds four (4) patents on the tuning process of an intake system ? something no other manufacturer can claim. The SP series of cold air intakes feature many of Injen Technology's patented tuning process, including MegaRam (MR) Technology (Patents 7,359,795 and 7,669,571), Air Fusion (Patents 7,757,548 and 7,721,699), and many other innovations that keep Injen Technology at the forefront in the performance aftermarket. , , The soul of this intake is found within 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Our engineers have painstakingly designed the intake to provide the highest levels of safe power, along with clean aesthetics that will impress every time you open your hood. In addition to the impressive power increase, the Injen team has ensured that a safe Air fuel (A/F) ratio has been maintained throughout the power band. , , Additionally, this SP intake includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area allowing for greater airflow and unbeatable filtration. If that's not enough, the Injen SP performance intake provides power you can hear and feel! This intake provides an aggressive and throaty tone that is unmatched in the aftermarket. Want to add that personalized touch to your intake? You're in luck, as Injen also offers this intake system in multiple finishes. To top it all off, this SP CAI kit includes the unbeatable Injen Technology limited Lifetime Warranty!

• This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Includes custom heat shield specifically designed for this application
• Smooth intake piping eliminates restrictions and improves airflow
• Fits specific applications equipped with the B46/B48 engine
• Dyno Proven gains of up to 13 hp and 12 lb-ft. of torque
• Fully serviceable Injen SuperNano-Web dry air filter
• Features Injen's patented MegaRam (MR) Technology
• Provides power gains while maintaining A/F ratios
• Features Injen's patented Air Fusion Technology
• Replacement air filter part number X-1105-BB
• Mandrel Bent 6061-T6 Aluminum Induction Tube
• Aggressive engine tone under full throttle
• Injen Technology Limited Lifetime Warranty
• 6061-T6 aluminum intake tubing
• Available in multiple finishes
• Made in Pomona, California USA
• No additional tuning required
• Short Ram Air Intake Design

This Part Fits:

Is your engine choking for air and in need of some additional horsepower? If so, Injen has exciting news for you! The SP series of cold air intakes from Injen Technology will allow your engine to breathe deeper and enhance the performance that you've been craving. The SP series of cold air intakes is Injen's flagship system in their lines of traditional aluminum cold air intake systems. Injen Technology is the world's first tuned air intake system and holds four (4) patents on the tuning process of an intake system ? something no other manufacturer can claim. The SP series of cold air intakes feature many of Injen Technology's patented tuning process, including MegaRam (MR) Technology (Patents 7,359,795 and 7,669,571), Air Fusion (Patents 7,757,548 and 7,721,699), and many other innovations that keep Injen Technology at the forefront in the performance aftermarket. , , The soul of this intake is found within 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Our engineers have painstakingly designed the intake to provide the highest levels of safe power, along with clean aesthetics that will impress every time you open your hood. In addition to the impressive power increase, the Injen team has ensured that a safe Air fuel (A/F) ratio has been maintained throughout the power band. , , Additionally, this SP intake includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area allowing for greater airflow and unbeatable filtration. If that's not enough, the Injen SP performance intake provides power you can hear and feel! This intake provides an aggressive and throaty tone that is unmatched in the aftermarket. Want to add that personalized touch to your intake? You're in luck, as Injen also offers this intake system in multiple finishes. To top it all off, this SP CAI kit includes the unbeatable Injen Technology limited Lifetime Warranty!

• This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Includes custom heat shield specifically designed for this application
• Smooth intake piping eliminates restrictions and improves airflow
• Fits specific applications equipped with the B46/B48 engine
• Dyno Proven gains of up to 13 hp and 12 lb-ft. of torque
• Fully serviceable Injen SuperNano-Web dry air filter
• Features Injen's patented MegaRam (MR) Technology
• Provides power gains while maintaining A/F ratios
• Features Injen's patented Air Fusion Technology
• Mandrel Bent 6061-T6 Aluminum Induction Tube
• Replacement air filter part number X-1105-BB
• Aggressive engine tone under full throttle
• Injen Technology Limited Lifetime Warranty
• 6061-T6 aluminum intake tubing
• Available in multiple finishes
• Made in Pomona, California USA
• No additional tuning required
• Short Ram Air Intake Design

This Part Fits:

Is your engine choking for air and in need of some additional horsepower? If so, Injen has exciting news for you! The SP series of cold air intakes from Injen Technology will allow your engine to breathe deeper and enhance the performance that you've been craving. The SP series of cold air intakes is Injen's flagship system in their lines of traditional aluminum cold air intake systems. Injen Technology is the world's first tuned air intake system and holds four (4) patents on the tuning process of an intake system ? something no other manufacturer can claim. The SP series of cold air intakes feature many of Injen Technology's patented tuning process, including MegaRam (MR) Technology (Patents 7,359,795 and 7,669,571), Air Fusion (Patents 7,757,548 and 7,721,699), and many other innovations that keep Injen Technology at the forefront in the performance aftermarket. , , The soul of this intake is found within 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Our engineers have painstakingly designed the intake to provide the highest levels of safe power, along with clean aesthetics that will impress every time you open your hood. In addition to the impressive power increase, the Injen team has ensured that a safe Air fuel (A/F) ratio has been maintained throughout the power band. , , Additionally, this SP intake includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area allowing for greater airflow and unbeatable filtration. If that's not enough, the Injen SP performance intake provides power you can hear and feel! This intake provides an aggressive and throaty tone that is unmatched in the aftermarket. Want to add that personalized touch to your intake? You're in luck, as Injen also offers this intake system in multiple finishes. To top it all off, this SP CAI kit includes the unbeatable Injen Technology limited Lifetime Warranty!

• This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Includes custom heat shield specifically designed for this application
• Smooth intake piping eliminates restrictions and improves airflow
• Dyno Proven gains of up to 10 hp and 22 lb-ft. of torque
• Fully serviceable Injen SuperNano-Web dry air filter
• Provides power gains while maintaining A/F ratios
• Features Injen's patented Air Fusion Technology
• Replacement air filter part number X-1059-BB
• Aggressive engine tone under full throttle
• Injen Technology Limited Lifetime Warranty
• Increased Torque Up To 22 ft./lbs.
• 6061-T6 aluminum intake tubing
• Available in multiple finishes
• Made in Pomona, California USA
• No additional tuning required
• Short Ram Air Intake Design

This Part Fits:

Is your engine choking for air and in need of some additional horsepower? If so, Injen has exciting news for you! The SP series of cold air intakes from Injen Technology will allow your engine to breathe deeper and enhance the performance that you've been craving. The SP series of cold air intakes is Injen's flagship system in their lines of traditional aluminum cold air intake systems. Injen Technology is the world's first tuned air intake system and holds four (4) patents on the tuning process of an intake system ? something no other manufacturer can claim. The SP series of cold air intakes feature many of Injen Technology's patented tuning process, including MegaRam (MR) Technology (Patents 7,359,795 and 7,669,571), Air Fusion (Patents 7,757,548 and 7,721,699), and many other innovations that keep Injen Technology at the forefront in the performance aftermarket. , , The soul of this intake is found within 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Our engineers have painstakingly designed the intake to provide the highest levels of safe power, along with clean aesthetics that will impress every time you open your hood. In addition to the impressive power increase, the Injen team has ensured that a safe Air fuel (A/F) ratio has been maintained throughout the power band. , , Additionally, this SP intake includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area allowing for greater airflow and unbeatable filtration. If that's not enough, the Injen SP performance intake provides power you can hear and feel! This intake provides an aggressive and throaty tone that is unmatched in the aftermarket. Want to add that personalized touch to your intake? You're in luck, as Injen also offers this intake system in multiple finishes. To top it all off, this SP CAI kit includes the unbeatable Injen Technology limited Lifetime Warranty!

• This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Includes custom heat shield specifically designed for this application
• Smooth intake piping eliminates restrictions and improves airflow
• Dyno Proven gains of up to 10 hp and 22 lb-ft. of torque
• Fully serviceable Injen SuperNano-Web dry air filter
• Provides power gains while maintaining A/F ratios
• Features Injen's patented Air Fusion Technology
• Replacement air filter part number X-1059-BB
• Aggressive engine tone under full throttle
• Injen Technology Limited Lifetime Warranty
• Increased Torque Up To 22 ft./lbs.
• 6061-T6 aluminum intake tubing
• Available in multiple finishes
• Made in Pomona, California USA
• No additional tuning required
• Short Ram Air Intake Design

This Part Fits:

Is your engine choking for air and in need of some additional horsepower? If so, Injen has exciting news for you! The SP series of cold air intakes from Injen Technology will allow your engine to breathe deeper and enhance the performance that you've been craving. The SP series of cold air intakes is Injen's flagship system in their lines of traditional aluminum cold air intake systems. Injen Technology is the world's first tuned air intake system and holds four (4) patents on the tuning process of an intake system ? something no other manufacturer can claim. The SP series of cold air intakes feature many of Injen Technology's patented tuning process, including MegaRam (MR) Technology (Patents 7,359,795 and 7,669,571), Air Fusion (Patents 7,757,548 and 7,721,699), and many other innovations that keep Injen Technology at the forefront in the performance aftermarket. , , The soul of this intake is found within 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Our engineers have painstakingly designed the intake to provide the highest levels of safe power, along with clean aesthetics that will impress every time you open your hood. In addition to the impressive power increase, the Injen team has ensured that a safe Air fuel (A/F) ratio has been maintained throughout the power band. , , Additionally, this SP intake includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area allowing for greater airflow and unbeatable filtration. If that's not enough, the Injen SP performance intake provides power you can hear and feel! This intake provides an aggressive and throaty tone that is unmatched in the aftermarket. Want to add that personalized touch to your intake? You're in luck, as Injen also offers this intake system in multiple finishes. To top it all off, this SP CAI kit includes the unbeatable Injen Technology limited Lifetime Warranty!

• Includes custom heat shield specifically designed for this application
• Smooth intake piping eliminates restrictions and improves airflow
• CARB EO #: D-476-8 applies to the following applications only.
• Please note that CARB EO# D-476-8 excludes all SULEV Vehicles
• Dyno Proven gains of up to 12 hp and 11 lb-ft. of torque
• Fully serviceable Injen SuperNano-Web dry air filter
• Optional hydroshield part number 1037BLK or 1037RED
• Features Injen's patented MegaRam (MR) Technology
• Provides power gains while maintaining A/F ratios
• Features Injen's patented Air Fusion Technology
• Replacement air filter part number X-1021-BB
• Aggressive engine tone under full throttle
• Injen Technology Limited Lifetime Warranty
• 2006 BMW 325i/xi L6 3.0L (E90/91/92/93)
• Increased Torque Up To 10.4 ft./lbs.
• Available in multiple finishes
• Made in Pomona, California USA
• 6061-T6 aluminum intake tubing
• No additional tuning required
• Short Ram Air Intake Design
• 2006 BMW 330i/xi L6-3.0L

This Part Fits:

Is your engine choking for air and in need of some additional horsepower? If so, Injen has exciting news for you! The SP series of cold air intakes from Injen Technology will allow your engine to breathe deeper and enhance the performance that you've been craving. The SP series of cold air intakes is Injen's flagship system in their lines of traditional aluminum cold air intake systems. Injen Technology is the world's first tuned air intake system and holds four (4) patents on the tuning process of an intake system ? something no other manufacturer can claim. The SP series of cold air intakes feature many of Injen Technology's patented tuning process, including MegaRam (MR) Technology (Patents 7,359,795 and 7,669,571), Air Fusion (Patents 7,757,548 and 7,721,699), and many other innovations that keep Injen Technology at the forefront in the performance aftermarket. , , The soul of this intake is found within 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Our engineers have painstakingly designed the intake to provide the highest levels of safe power, along with clean aesthetics that will impress every time you open your hood. In addition to the impressive power increase, the Injen team has ensured that a safe Air fuel (A/F) ratio has been maintained throughout the power band. , , Additionally, this SP intake includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area allowing for greater airflow and unbeatable filtration. If that's not enough, the Injen SP performance intake provides power you can hear and feel! This intake provides an aggressive and throaty tone that is unmatched in the aftermarket. Want to add that personalized touch to your intake? You're in luck, as Injen also offers this intake system in multiple finishes. To top it all off, this SP CAI kit includes the unbeatable Injen Technology limited Lifetime Warranty!

• Includes custom heat shield specifically designed for this application
• Smooth intake piping eliminates restrictions and improves airflow
• CARB EO #: D-476-8 applies to the following applications only.
• Please note that CARB EO# D-476-8 excludes all SULEV Vehicles
• Dyno Proven gains of up to 12 hp and 11 lb-ft. of torque
• Fully serviceable Injen SuperNano-Web dry air filter
• Optional hydroshield part number 1037BLK or 1037RED
• Features Injen's patented MegaRam (MR) Technology
• Provides power gains while maintaining A/F ratios
• Features Injen's patented Air Fusion Technology
• Replacement air filter part number X-1021-BB
• Aggressive engine tone under full throttle
• Injen Technology Limited Lifetime Warranty
• 2006 BMW 325i/xi L6 3.0L (E90/91/92/93)
• Increased Torque Up To 10.4 ft./lbs.
• 6061-T6 aluminum intake tubing
• Available in multiple finishes
• Made in Pomona, California USA
• No additional tuning required
• Short Ram Air Intake Design
• 2006 BMW 330i/xi L6-3.0L

This Part Fits:

Is your engine choking for air and in need of some additional horsepower? If so, Injen has exciting news for you! The SP series of cold air intakes from Injen Technology will allow your engine to breathe deeper and enhance the performance that you've been craving. The SP series of cold air intakes is Injen's flagship system in their lines of traditional aluminum cold air intake systems. Injen Technology is the world's first tuned air intake system and holds four (4) patents on the tuning process of an intake system ? something no other manufacturer can claim. The SP series of cold air intakes feature many of Injen Technology's patented tuning process, including MegaRam (MR) Technology (Patents 7,359,795 and 7,669,571), Air Fusion (Patents 7,757,548 and 7,721,699), and many other innovations that keep Injen Technology at the forefront in the performance aftermarket. , , The soul of this intake is found within 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Our engineers have painstakingly designed the intake to provide the highest levels of safe power, along with clean aesthetics that will impress every time you open your hood. In addition to the impressive power increase, the Injen team has ensured that a safe Air fuel (A/F) ratio has been maintained throughout the power band. , , Additionally, this SP intake includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area allowing for greater airflow and unbeatable filtration. If that's not enough, the Injen SP performance intake provides power you can hear and feel! This intake provides an aggressive and throaty tone that is unmatched in the aftermarket. Want to add that personalized touch to your intake? You're in luck, as Injen also offers this intake system in multiple finishes. To top it all off, this SP CAI kit includes the unbeatable Injen Technology limited Lifetime Warranty!

• This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Smooth intake piping eliminates restrictions and improves airflow
• Includes custom heat shield with high-flow velocity stack
• Dyno Proven gains of up to 10 hp and 10 lb-ft. of torque
• Fully serviceable Injen SuperNano-Web dry air filter
• Provides power gains while maintaining A/F ratios
• Replacement air filter part number X-1045-BB
• Aggressive engine tone under full throttle
• Injen Technology Limited Lifetime Warranty
• Optional hydroshield part number 1052BLK
• Increased Torque up to 10 ft./lbs.
• 6061-T6 aluminum intake tubing
• Available in multiple finishes
• Made in Pomona, California USA
• No additional tuning required
• Short Ram Air Intake Design

This Part Fits:

Is your engine choking for air and in need of some additional horsepower? If so, Injen has exciting news for you! The SP series of cold air intakes from Injen Technology will allow your engine to breathe deeper and enhance the performance that you've been craving. The SP series of cold air intakes is Injen's flagship system in their lines of traditional aluminum cold air intake systems. Injen Technology is the world's first tuned air intake system and holds four (4) patents on the tuning process of an intake system ? something no other manufacturer can claim. The SP series of cold air intakes feature many of Injen Technology's patented tuning process, including MegaRam (MR) Technology (Patents 7,359,795 and 7,669,571), Air Fusion (Patents 7,757,548 and 7,721,699), and many other innovations that keep Injen Technology at the forefront in the performance aftermarket. , , The soul of this intake is found within 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Our engineers have painstakingly designed the intake to provide the highest levels of safe power, along with clean aesthetics that will impress every time you open your hood. In addition to the impressive power increase, the Injen team has ensured that a safe Air fuel (A/F) ratio has been maintained throughout the power band. , , Additionally, this SP intake includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area allowing for greater airflow and unbeatable filtration. If that's not enough, the Injen SP performance intake provides power you can hear and feel! This intake provides an aggressive and throaty tone that is unmatched in the aftermarket. Want to add that personalized touch to your intake? You're in luck, as Injen also offers this intake system in multiple finishes. To top it all off, this SP CAI kit includes the unbeatable Injen Technology limited Lifetime Warranty!

• This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Smooth intake piping eliminates restrictions and improves airflow
• Includes custom heat shield with high-flow velocity stack
• Dyno Proven gains of up to 10 hp and 9 lb-ft. of torque
• Fully serviceable Injen SuperNano-Web dry air filter
• Provides power gains while maintaining A/F ratios
• Replacement air filter part number X-1045-BB
• Aggressive engine tone under full throttle
• Injen Technology Limited Lifetime Warranty
• Optional hydroshield part number 1052BLK
• Increased Torque Up To 9 ft./lbs.
• 6061-T6 aluminum intake tubing
• Available in multiple finishes
• Made in Pomona, California USA
• No additional tuning required
• Short Ram Air Intake Design

This Part Fits:

Is your engine choking for air and in need of some additional horsepower? If so, Injen has exciting news for you! The SP series of cold air intakes from Injen Technology will allow your engine to breathe deeper and enhance the performance that you've been craving. The SP series of cold air intakes is Injen's flagship system in their lines of traditional aluminum cold air intake systems. Injen Technology is the world's first tuned air intake system and holds four (4) patents on the tuning process of an intake system ? something no other manufacturer can claim. The SP series of cold air intakes feature many of Injen Technology's patented tuning process, including MegaRam (MR) Technology (Patents 7,359,795 and 7,669,571), Air Fusion (Patents 7,757,548 and 7,721,699), and many other innovations that keep Injen Technology at the forefront in the performance aftermarket. , , The soul of this intake is found within 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Our engineers have painstakingly designed the intake to provide the highest levels of safe power, along with clean aesthetics that will impress every time you open your hood. In addition to the impressive power increase, the Injen team has ensured that a safe Air fuel (A/F) ratio has been maintained throughout the power band. , , Additionally, this SP intake includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area allowing for greater airflow and unbeatable filtration. If that's not enough, the Injen SP performance intake provides power you can hear and feel! This intake provides an aggressive and throaty tone that is unmatched in the aftermarket. Want to add that personalized touch to your intake? You're in luck, as Injen also offers this intake system in multiple finishes. To top it all off, this SP CAI kit includes the unbeatable Injen Technology limited Lifetime Warranty!

• Smooth intake piping eliminates restrictions and improves airflow
• Dyno Proven gains of up to 10 hp and 11 lb-ft. of torque
• Fully serviceable Injen SuperNano-Web dry air filter
• CARB EO #: D-476-8 applies to 2011 model year ONLY.
• Provides power gains while maintaining A/F ratios
• Replacement air filter part number X-1049-BB
• Aggressive engine tone under full throttle
• Injen Technology Limited Lifetime Warranty
• Optional hydroshield part number 1031BLK
• Increased Torque Up To 4.2 ft./lbs.
• 6061-T6 aluminum intake tubing
• Available in multiple finishes
• Made in Pomona, California USA
• No additional tuning required
• Short Ram Air Intake Design
• Includes custom heat shield
• CARB EO #: D-476-8

This Part Fits:

Is your engine choking for air and in need of some additional horsepower? If so, Injen has exciting news for you! The SP series of cold air intakes from Injen Technology will allow your engine to breathe deeper and enhance the performance that you've been craving. The SP series of cold air intakes is Injen's flagship system in their lines of traditional aluminum cold air intake systems. Injen Technology is the world's first tuned air intake system and holds four (4) patents on the tuning process of an intake system ? something no other manufacturer can claim. The SP series of cold air intakes feature many of Injen Technology's patented tuning process, including MegaRam (MR) Technology (Patents 7,359,795 and 7,669,571), Air Fusion (Patents 7,757,548 and 7,721,699), and many other innovations that keep Injen Technology at the forefront in the performance aftermarket. , , The soul of this intake is found within 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Our engineers have painstakingly designed the intake to provide the highest levels of safe power, along with clean aesthetics that will impress every time you open your hood. In addition to the impressive power increase, the Injen team has ensured that a safe Air fuel (A/F) ratio has been maintained throughout the power band. , , Additionally, this SP intake includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area allowing for greater airflow and unbeatable filtration. If that's not enough, the Injen SP performance intake provides power you can hear and feel! This intake provides an aggressive and throaty tone that is unmatched in the aftermarket. Want to add that personalized touch to your intake? You're in luck, as Injen also offers this intake system in multiple finishes. To top it all off, this SP CAI kit includes the unbeatable Injen Technology limited Lifetime Warranty!

• Note: Does not fit Euro models with 3.5" High Flow MAF or vehicles with 3.5" High Flow MAF Conversions
• Smooth intake piping eliminates restrictions and improves airflow
• CARB EO #: D-476-8 applies to the following applications only-
• Dyno Proven gains of up to 13 hp and 15 lb-ft. of torque
• Fully serviceable Injen SuperNano-Web dry air filter
• Optional hydroshield part number 1034BLK or 1034RED
• Provides power gains while maintaining A/F ratios
• Replacement air filter part number X-1015-BB
• Aggressive engine tone under full throttle
• Injen Technology Limited Lifetime Warranty
• Includes custom heat shield with cover
• Increased Torque Up To 14.5 ft./lbs.
• 6061-T6 aluminum intake tubing
• Available in multiple finishes
• Made in Pomona California, USA
• No additional tuning required
• 1996-1998 BMW 328i/is L6-2.8L
• Short Ram Air Intake Design
• 1996-1998 BMW 323i L6-2.5L
• 1992-1995 BMW 325i L6-2.5L
• 1996-1998 BMW M3 L6-3.2L
• 1995 BMW M3 L6-3.0L

This Part Fits:

Is your engine choking for air and in need of some additional horsepower? If so, Injen has exciting news for you! The SP series of cold air intakes from Injen Technology will allow your engine to breathe deeper and enhance the performance that you've been craving. The SP series of cold air intakes is Injen's flagship system in their lines of traditional aluminum cold air intake systems. Injen Technology is the world's first tuned air intake system and holds four (4) patents on the tuning process of an intake system ? something no other manufacturer can claim. The SP series of cold air intakes feature many of Injen Technology's patented tuning process, including MegaRam (MR) Technology (Patents 7,359,795 and 7,669,571), Air Fusion (Patents 7,757,548 and 7,721,699), and many other innovations that keep Injen Technology at the forefront in the performance aftermarket. , , The soul of this intake is found within 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Our engineers have painstakingly designed the intake to provide the highest levels of safe power, along with clean aesthetics that will impress every time you open your hood. In addition to the impressive power increase, the Injen team has ensured that a safe Air fuel (A/F) ratio has been maintained throughout the power band. , , Additionally, this SP intake includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area allowing for greater airflow and unbeatable filtration. If that's not enough, the Injen SP performance intake provides power you can hear and feel! This intake provides an aggressive and throaty tone that is unmatched in the aftermarket. Want to add that personalized touch to your intake? You're in luck, as Injen also offers this intake system in multiple finishes. To top it all off, this SP CAI kit includes the unbeatable Injen Technology limited Lifetime Warranty!

• Note: Does not fit Euro models with 3.5" High Flow MAF or vehicles with 3.5" High Flow MAF Conversions
• Smooth intake piping eliminates restrictions and improves airflow
• CARB EO #: D-476-8 applies to the following applications only-
• Dyno Proven gains of up to 13 hp and 15 lb-ft. of torque
• Fully serviceable Injen SuperNano-Web dry air filter
• Optional hydroshield part number 1034BLK or 1034RED
• Provides power gains while maintaining A/F ratios
• Replacement air filter part number X-1015-BB
• Aggressive engine tone under full throttle
• Injen Technology Limited Lifetime Warranty
• Includes custom heat shield with cover
• Increased Torque Up To 14.5 ft./lbs.
• 6061-T6 aluminum intake tubing
• Available in multiple finishes
• Made in Pomona California, USA
• No additional tuning required
• 1996-1998 BMW 328i/is L6-2.8L
• Short Ram Air Intake Design
• 1996-1998 BMW 323i L6-2.5L
• 1992-1995 BMW 325i L6-2.5L
• 1996-1998 BMW M3 L6-3.2L
• 1995 BMW M3 L6-3.0L

This Part Fits:

Is your engine choking for air and in need of some additional horsepower? If so, Injen has exciting news for you! The SP series of cold air intakes from Injen Technology will allow your engine to breathe deeper and enhance the performance that you've been craving. The SP series of cold air intakes is Injen's flagship system in their lines of traditional aluminum cold air intake systems. Injen Technology is the world's first tuned air intake system and holds four (4) patents on the tuning process of an intake system ? something no other manufacturer can claim. The SP series of cold air intakes feature many of Injen Technology's patented tuning process, including MegaRam (MR) Technology (Patents 7,359,795 and 7,669,571), Air Fusion (Patents 7,757,548 and 7,721,699), and many other innovations that keep Injen Technology at the forefront in the performance aftermarket. , , The soul of this intake is found within 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Our engineers have painstakingly designed the intake to provide the highest levels of safe power, along with clean aesthetics that will impress every time you open your hood. In addition to the impressive power increase, the Injen team has ensured that a safe Air fuel (A/F) ratio has been maintained throughout the power band. , , Additionally, this SP intake includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area allowing for greater airflow and unbeatable filtration. If that's not enough, the Injen SP performance intake provides power you can hear and feel! This intake provides an aggressive and throaty tone that is unmatched in the aftermarket. Want to add that personalized touch to your intake? You're in luck, as Injen also offers this intake system in multiple finishes. To top it all off, this SP CAI kit includes the unbeatable Injen Technology limited Lifetime Warranty!

• This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Smooth intake piping eliminates restrictions and improves airflow
• Dyno Proven gains of up to 5 hp and 4 lb-ft. of torque
• Fully serviceable Injen SuperNano-Web dry air filter
• Optional hydroshield part number 1035BLK or 1035RED
• Provides power gains while maintaining A/F ratios
• Replacement air filter part number X-1024-BB
• Aggressive engine tone under full throttle
• Injen Technology Limited Lifetime Warranty
• Increased Torque Up To 4.2 ft./lbs.
• 6061-T6 aluminum intake tubing
• Available in multiple finishes
• Made in Pomona, California USA
• No additional tuning required
• Short Ram Air Intake Design

This Part Fits:

Is your engine choking for air and in need of some additional horsepower? If so, Injen has exciting news for you! The SP series of cold air intakes from Injen Technology will allow your engine to breathe deeper and enhance the performance that you've been craving. The SP series of cold air intakes is Injen's flagship system in their lines of traditional aluminum cold air intake systems. Injen Technology is the world's first tuned air intake system and holds four (4) patents on the tuning process of an intake system ? something no other manufacturer can claim. The SP series of cold air intakes feature many of Injen Technology's patented tuning process, including MegaRam (MR) Technology (Patents 7,359,795 and 7,669,571), Air Fusion (Patents 7,757,548 and 7,721,699), and many other innovations that keep Injen Technology at the forefront in the performance aftermarket. , , The soul of this intake is found within 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Our engineers have painstakingly designed the intake to provide the highest levels of safe power, along with clean aesthetics that will impress every time you open your hood. In addition to the impressive power increase, the Injen team has ensured that a safe Air fuel (A/F) ratio has been maintained throughout the power band. , , Additionally, this SP intake includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area allowing for greater airflow and unbeatable filtration. If that's not enough, the Injen SP performance intake provides power you can hear and feel! This intake provides an aggressive and throaty tone that is unmatched in the aftermarket. Want to add that personalized touch to your intake? You're in luck, as Injen also offers this intake system in multiple finishes. To top it all off, this SP CAI kit includes the unbeatable Injen Technology limited Lifetime Warranty!

• This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Smooth intake piping eliminates restrictions and improves airflow
• Dyno Proven gains of up to 5 hp and 4 lb-ft. of torque
• Fully serviceable Injen SuperNano-Web dry air filter
• Optional hydroshield part number 1035BLK or 1035RED
• Provides power gains while maintaining A/F ratios
• Replacement air filter part number X-1024-BB
• Aggressive engine tone under full throttle
• Injen Technology Limited Lifetime Warranty
• Increased Torque Up To 4.2 ft./lbs.
• 6061-T6 aluminum intake tubing
• Available in multiple finishes
• Made in Pomona, California USA
• No additional tuning required
• Short Ram Air Intake Design

This Part Fits:

Add some easy horsepower to your Ride with this RD Series Performance cold air intake (CAI) from Injen Technology! The engineers at Injen have spent considerable amounts of time designing, testing, and perfecting this CAI to produce some serious bolt-on power while also providing amazing engine bay aesthetics. In addition to the impressive power increase, the Injen team has ensured that safe Air fuel (A/F) ratios are maintained throughout the powerband. , , The soul of this intake is found within our mandrel-bent 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. This tube reaches into the depths of the engine bay to collect the coolest and densest air available. Additionally, this RD intake also includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area allowing for greater airflow and unbeatable filtration. If that's not enough, the Injen RD performance intake provides power you can hear and feel! This intake provides an aggressive and throaty tone that is unmatched in the aftermarket. Want to add that personalized touch to your intake? Injen also offers this intake system in a polished or a powder-coated Black finish. To top it all off, this RD CAI kit includes the unbeatable Injen Technology limited Lifetime Warranty!,

• Smooth mandrel-bent I take piping eliminates restrictions and improves airflow
• Provides power gains while maintaining A/F ratios with no additional tuning
• Dyno Proven gains of up to 22 hp and 24 lb-ft. of torque
• Available with a polished or Black powder coated finish
• Fully serviceable Injen SuperNano-Web dry air filter
• Optional hydroshield part number 1034BLK or 1034RED
• Replacement air filter part number X-1015-BB
• 6061-T6 Mandrel-bent aluminum intake tubing
• Aggressive engine tone under full throttle
• Injen Technology Limited Lifetime Warranty
• Made in Pomona, California USA
• Increased HP Up To 22.1
• CARB EO #: D-476-8

This Part Fits:

Add some easy horsepower to your Ride with this RD Series Performance cold air intake (CAI) from Injen Technology! The engineers at Injen have spent considerable amounts of time designing, testing, and perfecting this CAI to produce some serious bolt-on power while also providing amazing engine bay aesthetics. In addition to the impressive power increase, the Injen team has ensured that safe Air fuel (A/F) ratios are maintained throughout the powerband. , , The soul of this intake is found within our mandrel-bent 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. This tube reaches into the depths of the engine bay to collect the coolest and densest air available. Additionally, this RD intake also includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area allowing for greater airflow and unbeatable filtration. If that's not enough, the Injen RD performance intake provides power you can hear and feel! This intake provides an aggressive and throaty tone that is unmatched in the aftermarket. Want to add that personalized touch to your intake? Injen also offers this intake system in a polished or a powder-coated Black finish. To top it all off, this RD CAI kit includes the unbeatable Injen Technology limited Lifetime Warranty!,

• Smooth mandrel-bent intake piping eliminates restrictions and improves airflow
• Provides power gains while maintaining A/F ratios with no additional tuning
• CARB E.O. # Excludes SULEV vehicles with test group number 5TKXV02.3NG1
• Dyno Proven gains of up to 11 hp and 10 lb-ft. of torque
• Available with a polished or Black powder coated finish
• Fully serviceable Injen SuperNano-Web dry air filter
• Optional hydroshield part number 1033BLK or 1033RED
• Replacement air filter part number X-1013-BB
• 6061-T6 Mandrel-bent aluminum intake tubing
• Aggressive engine tone under full throttle
• Injen Technology Limited Lifetime Warranty
• Made in Pomona, California USA
• SuperNano Dry Filter
• CARB EO #: D-476-5

This Part Fits:

Add some easy horsepower to your Ride with this RD Series Performance cold air intake (CAI) from Injen Technology! The engineers at Injen have spent considerable amounts of time designing, testing, and perfecting this CAI to produce some serious bolt-on power while also providing amazing engine bay aesthetics. In addition to the impressive power increase, the Injen team has ensured that safe Air fuel (A/F) ratios are maintained throughout the powerband. , , The soul of this intake is found within our mandrel-bent 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. This tube reaches into the depths of the engine bay to collect the coolest and densest air available. Additionally, this RD intake also includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area allowing for greater airflow and unbeatable filtration. If that's not enough, the Injen RD performance intake provides power you can hear and feel! This intake provides an aggressive and throaty tone that is unmatched in the aftermarket. Want to add that personalized touch to your intake? Injen also offers this intake system in a polished or a powder-coated Black finish. To top it all off, this RD CAI kit includes the unbeatable Injen Technology limited Lifetime Warranty!,

• Smooth mandrel-bent I take piping eliminates restrictions and improves airflow
• Provides power gains while maintaining A/F ratios with no additional tuning
• Available with a polished or Black powder coated finish
• Dyno Proven gains of up to 6 hp and 6 lb-ft. of torque
• Fully serviceable Injen SuperNano-Web dry air filter
• Optional hydroshield part number 1033BLK or 1033RED
• Replacement air filter part number X-1013-BB
• 6061-T6 Mandrel-bent aluminum intake tubing
• Aggressive engine tone under full throttle
• Injen Technology Limited Lifetime Warranty
• Made in Pomona, California USA
• Increased HP up to 6.1
• CARB EO #: D-476-4

This Part Fits: