Add easy horsepower to your ride with the Injen Technology IS Performance short ram Air Intake! Our engineers spent abundant amounts of time designing, testing, and perfecting this product to develop some serious bolt-on power with some killer Horsepower increase. In addition to the impressive power increase, the Injen team has ensured that safe Air fuel (A/F) ratios are maintained throughout the powerband. The soul of this intake it is our mandrel-bent aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Additionally, this kit also includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area, allowing for greater airflow and unbeatable filtration. This Injen IS performance intake provides the power you can hear! It is a truly an upgrade for intake noise and provides an aggressive throaty tone, especially when you put the hammer down. want to add a personalized touch? Well, you are in luck, we offer this kit in a polished finish or a powder-coated Black. Plus, just like any other injen air intake systems, this intake kit includes the unbeatable Injen limited Lifetime Warranty!

• Smooth mandrel-bent Intake piping eliminates restrictions and improves airflow
• Provides power gains while maintaining A/F ratios with no additional tuning
• Dyno Proven gains of up to 10 hp and 10 lb-ft. of torque
• Available with a polished or Black powder coated finish
• Fully serviceable Injen SuperNano-Web dry air filter
• Optional hydroshield part number 1033BLK or 1033RED
• Replacement air filter part number X-1014-BB
• T6-6061 Mandrel-bent aluminum intake tubing
• Aggressive engine tone under full throttle
• Injen Technology Limited Lifetime Warranty
• Made in Pomona, California USA
• CARB EO #: D-476-5
• Polished

This Part Fits:

Add easy horsepower to your ride with the Injen Technology IS Performance short ram Air Intake! Our engineers spent abundant amounts of time designing, testing, and perfecting this product to develop some serious bolt-on power with some killer Horsepower increase. In addition to the impressive power increase, the Injen team has ensured that safe Air fuel (A/F) ratios are maintained throughout the powerband. The soul of this intake it is our mandrel-bent aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Additionally, this kit also includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area, allowing for greater airflow and unbeatable filtration. This Injen IS performance intake provides the power you can hear! It is a truly an upgrade for intake noise and provides an aggressive throaty tone, especially when you put the hammer down. want to add a personalized touch? Well, you are in luck, we offer this kit in a polished finish or a powder-coated Black. Plus, just like any other injen air intake systems, this intake kit includes the unbeatable Injen limited Lifetime Warranty!

• Smooth mandrel-bent Intake piping eliminates restrictions and improves airflow
• Provides power gains while maintaining A/F ratios with no additional tuning
• Dyno Proven gains of up to 10 hp and 10 lb-ft. of torque
• Available with a polished or Black powder coated finish
• Fully serviceable Injen SuperNano-Web dry air filter
• Optional hydroshield part number 1033BLK or 1033RED
• Replacement air filter part number X-1014-BB
• T6-6061 Mandrel-bent aluminum intake tubing
• Aggressive engine tone under full throttle
• Injen Technology Limited Lifetime Warranty
• Made in Pomona, California USA
• CARB EO #: D-476-5
• Black

This Part Fits:

Add easy horsepower to your ride with the Injen Technology IS Performance short ram Air Intake! Our engineers spent abundant amounts of time designing, testing, and perfecting this product to develop some serious bolt-on power with some killer Horsepower increase. In addition to the impressive power increase, the Injen team has ensured that safe Air fuel (A/F) ratios are maintained throughout the powerband. The soul of this intake it is our mandrel-bent aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Additionally, this kit also includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area, allowing for greater airflow and unbeatable filtration. This Injen IS performance intake provides the power you can hear! It is a truly an upgrade for intake noise and provides an aggressive throaty tone, especially when you put the hammer down. want to add a personalized touch? Well, you are in luck, we offer this kit in a polished finish or a powder-coated Black. Plus, just like any other injen air intake systems, this intake kit includes the unbeatable Injen limited Lifetime Warranty!

• Smooth mandrel-bent Intake piping eliminates restrictions and improves airflow
• Provides power gains while maintaining A/F ratios with no additional tuning
• Dyno Proven gains of up to 12 hp and 10 lb-ft. of torque
• Available with a polished or Black powder coated finish
• Fully serviceable Injen SuperNano-Web dry air filter
• Optional hydroshield part number 1035BLK or 1035RED
• Replacement air filter part number X-1020-BB
• T6-6061 Mandrel-bent aluminum intake tubing
• Aggressive engine tone under full throttle
• Injen Technology Limited Lifetime Warranty
• CARB EO for 2002-2005 model years only
• Increased Torque up to 9.8 ft./lbs.
• Made in Pomona, California USA
• CARB EO #: D-476-5

This Part Fits:

Add easy horsepower to your ride with the Injen Technology IS Performance short ram Air Intake! Our engineers spent abundant amounts of time designing, testing, and perfecting this product to develop some serious bolt-on power with some killer Horsepower increase. In addition to the impressive power increase, the Injen team has ensured that safe Air fuel (A/F) ratios are maintained throughout the powerband. The soul of this intake it is our mandrel-bent aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Additionally, this kit also includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area, allowing for greater airflow and unbeatable filtration. This Injen IS performance intake provides the power you can hear! It is a truly an upgrade for intake noise and provides an aggressive throaty tone, especially when you put the hammer down. want to add a personalized touch? Well, you are in luck, we offer this kit in a polished finish or a powder-coated Black. Plus, just like any other injen air intake systems, this intake kit includes the unbeatable Injen limited Lifetime Warranty!

• Smooth mandrel-bent Intake piping eliminates restrictions and improves airflow
• Provides power gains while maintaining A/F ratios with no additional tuning
• Dyno Proven gains of up to 12 hp and 10 lb-ft. of torque
• Available with a polished or Black powder coated finish
• Fully serviceable Injen SuperNano-Web dry air filter
• Optional hydroshield part number 1035BLK or 1035RED
• Replacement air filter part number X-1020-BB
• T6-6061 Mandrel-bent aluminum intake tubing
• Aggressive engine tone under full throttle
• Injen Technology Limited Lifetime Warranty
• CARB EO for 2002-2005 model years only
• Increased Torque up to 9.8 ft./lbs.
• Made in Pomona, California USA
• CARB EO #: D-476-5

This Part Fits:

Injen Technology's new EVO9302 Cold Air Intake for the 2021-2026 Ford Bronco's equipped with the 2.7L V6 EcoBoost engine is here and one look at the stats of this intake system and you'll know that it's the right choice for your new Bronco. The EVO9302 is a true 3D designed intake system that simply drops-in without any modifications, plus it delivers on those performance gains without the need for additional and expensive engine tuners. Simply install our intake system and you're set with no check engine lights and no drama!

• Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Our clear inspection badge allows you to quickly check the condition of your air filter while the red stripe enhances under hood appearances.
• Large forward-facing inlet is twice the size of OE to maximize incoming cool air from behind the grille
• Secondary Inlet for additional airflow OR to adapt to Injen's upcoming snorkel system
• Unlike the competition, the Injen intake tube goes all the way to the turbo
• Also available with a 8-Layer Oiled Air Filter: Intake system P/N EVO9302C
• No Tune Required - Designed to work seamless with the stock calibration
• Custom tapered dual intake tube for increased airflow to both turbos
• Aggressive under hood appearance while maintaining an OE fit
• Dyno Proven gains of up to 26 hp and 27 lb.-ft. of torque
• Utilizes our patented Twist-Lock Filter attachment system
• Stainless steel band clamps with inner protective liner
• Durable XLPE Roto-Molded Polyethylene tube and housing
• Fully serviceable Injen SuperNano-Web dry air filter
• Reinforced automotive grade silicone couplers
• Injen Technology Limited Lifetime Warranty
• Replacement air filter # X-1116-BB
• Made in Pomona California, USA

This Part Fits:

Injen Technology's new EVO9301C Cold Air Intake for the 2021-2022 Ford Bronco's equipped with the 2.7L V6 EcoBoost engine is here and one look at the stats of this intake system and you'll know that it's the right choice for your new Bronco. The EVO9301C is a true 3D designed intake system that simply drops-in without any modifications, plus it delivers on those performance gains without the need for additional and expensive engine tuners. Simply install our intake system and you're set with no check engine lights and no drama!

• Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Our clear inspection badge allows you to quickly check the condition of your air filter while the red stripe enhances under hood appearances.
• Large forward-facing inlet is twice the size of OE to maximize incoming cool air from behind the grille
• Secondary Inlet for additional airflow OR to adapt to Injen's upcoming snorkel system
• Unlike the competition, the Injen intake tubes goes all the way to the turbos
• Also available with a SuperNano-Web dry air Filter: Intake system P/N EVO9301
• No Tune Required - Designed to work seamless with the stock calibration
• Custom tapered dual intake tube for increased airflow to both turbos
• Fully serviceable Injen 8-Layer Oiled Cotton Gauze Air Filter
• Aggressive under hood appearance while maintaining an OE fit
• Dyno Proven gains of up to 26 hp and 27 lb.-ft. of torque
• Utilizes our patented Twist-Lock Filter attachment system
• Optional Air Filter Cleaning Kit also Available - X-1030
• Stainless steel band clamps with inner protective liner
• Durable XLPE Roto-Molded Polyethylene tube and housing
• Reinforced automotive grade silicone couplers
• Injen Technology Limited Lifetime Warranty
• Replacement air filter # X-1116-BR
• Made in Pomona California, USA

This Part Fits:

Injen Technology's new EVO9301 Cold Air Intake for the 2021-2022 Ford Bronco's equipped with the 2.7L V6 EcoBoost engine is here and one look at the stats of this intake system and you'll know that it's the right choice for your new Bronco. The EVO9301 is a true 3D designed intake system that simply drops-in without any modifications, plus it delivers on those performance gains without the need for additional and expensive engine tuners. Simply install our intake system and you're set with no check engine lights and no drama!

• Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Our clear inspection badge allows you to quickly check the condition of your air filter while the red stripe enhances under hood appearances.
• Large forward-facing inlet is twice the size of OE to maximize incoming cool air from behind the grille
• Secondary Inlet for additional airflow OR to adapt to Injen's upcoming snorkel system
• Unlike the competition, the Injen intake tubes goes all the way to the turbos
• Also available with a 8-Layer Oiled Air Filter: Intake system P/N EVO9301C
• No Tune Required - Designed to work seamless with the stock calibration
• Custom tapered dual intake tube for increased airflow to both turbos
• Aggressive under hood appearance while maintaining an OE fit
• Dyno Proven gains of up to 26 hp and 27 lb.-ft. of torque
• Utilizes our patented Twist-Lock Filter attachment system
• Stainless steel band clamps with inner protective liner
• Durable XLPE Roto-Molded Polyethylene tube and housing
• Fully serviceable Injen SuperNano-Web dry air filter
• Reinforced automotive grade silicone couplers
• Injen Technology Limited Lifetime Warranty
• Replacement air filter # X-1116-BB
• Made in Pomona California, USA

This Part Fits:

Injen Technology's new EVO9300C Cold Air Intake for the 2021-2024 Ford Bronco's equipped with the 2.3L EcoBoost engine is here and one look at the stats of this intake system and you'll know that it's the right choice for your new Bronco. The EVO9300C is a true 3D designed intake system that simply drops-in without any modifications, plus it delivers on those performance gains without the need for additional and expensive engine tuners. Simply install our intake system and you're set with no check engine lights and no drama!

• Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Our clear inspection badge allows you to quickly check the condition of your air filter while the red stripe enhances under hood appearances.
• Large forward-facing inlet is twice the size of OE to maximize incoming cool air from behind the grille
• Secondary Inlet for additional airflow OR to adapt to Injen's upcoming snorkel system
• Massive intake tube that tapers down from 5in OD to 3.5in for increased airflow
• Unlike the competition, the Injen intake tube goes all the way to the turbo
• No Tune Required - Designed to work seamless with the stock calibration
• Also available with a Dry Air Filter: Intake system P/N EVO9300
• Fully serviceable Injen 8-Layer Oiled Cotton Gauze air filter
• Aggressive under hood appearance while maintaining an OE fit
• Dyno Proven gains of up to 13 hp and 13 lb.-ft. of torque
• Utilizes our patented Twist-Lock Filter attachment system
• Optional Injen air filter cleaning kit part number X-1030
• Stainless steel band clamps with inner protective liner
• Durable XLPE Roto-Molded Polyethylene tube and housing
• Reinforced automotive grade silicone couplers
• Replacement air filter part number X-1116-BR
• Injen Technology Limited Lifetime Warranty
• Made in Pomona California, USA

This Part Fits:

Injen Technology's new EVO9300 Cold Air Intake for the 2021-2024 Ford Bronco's equipped with the 2.3L EcoBoost engine is here and one look at the stats of this intake system and you'll know that it's the right choice for your new Bronco. The EVO9300 is a true 3D designed intake system that simply drops-in without any modifications, plus it delivers on those performance gains without the need for additional and expensive engine tuners. Simply install our intake system and you're set with no check engine lights and no drama!

• Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Our clear inspection badge allows you to quickly check the condition of your air filter while the red stripe enhances under hood appearances.
• Large forward-facing inlet is twice the size of OE to maximize incoming cool air from behind the grille
• Secondary Inlet for additional airflow OR to adapt to Injen's upcoming snorkel system
• Massive intake tube that tapers down from 5in OD to 3.5in for increased airflow
• Unlike the competition, the Injen intake tube goes all the way to the turbo
• Also available with a 8-Layer Oiled Air Filter: Intake system P/N EVO9300C
• No Tune Required - Designed to work seamless with the stock calibration
• Aggressive under hood appearance while maintaining an OE fit
• Dyno Proven gains of up to 13 hp and 13 lb.-ft. of torque
• Utilizes our patented Twist-Lock Filter attachment system
• Stainless steel band clamps with inner protective liner
• Durable XLPE Roto-Molded Polyethylene tube and housing
• Fully serviceable Injen SuperNano-Web dry air filter
• Reinforced automotive grade silicone couplers
• Injen Technology Limited Lifetime Warranty
• Replacement air filter # X-1116-BB
• Made in Pomona California, USA

This Part Fits:

The all-new EVO9205 Evolution cold air intake system by Injen Technology is the next generation of performance intake systems for the 2015-2023 Ford Mustang with the 2.3L EcoBoost engine. Every EVO9205 cold air intake is made in the USA from cross linked high density polyethylene for extreme durability. The box has a forward facing ram air scoop to provide fresh, clean air to your engine. This intake system also includes stainless steel hardware and automotive grade urethane couplers. No cutting or drilling is required for an easy installation process that does not require aftermarket tuning for exceptional HORSEPOWER and TORQUE GAINS.

• Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Our clear inspection badge allows you to quickly check the condition of your air filter while the red stripe enhances under hood appearances.
• Massive intake tube that tapers down from 5in OD to increase airflow velocity at the turbo inlet
• Large forward-facing inlet to maximize incoming cool air from behind the grille
• No Tune Required - Designed to work seamless with the stock calibration
• Intake tube features Injen's patented internal MegaRam (MR) Technology
• Aggressive under hood appearance while maintaining an OE fit
• Dyno Proven gains of up to 23 hp and 21 lb.-ft. of torque
• Utilizes our patented Twist-Lock Filter attachment system
• Stainless steel band clamps with inner protective liner
• Durable XLPE Roto-Molded Polyethylene tube and housing
• Fully serviceable Injen SuperNano-Web dry air filter
• Reinforced automotive grade silicone couplers
• Injen Technology Limited Lifetime Warranty
• Replacement air filter # X-1107-BB
• Made in Pomona California, USA

This Part Fits:

The Evolution of cold air intakes is here. The Evolution cold air intake system by Injen Technology is the next generation of performance intake systems. The EVO9204 is specifically engineered for the 2015-2017 Ford Mustang GT with the 5.0L engine. Every EVO9204 cold air intake is made in the USA from cross linked high density polyethylene for extreme durability. The box has a forward facing ram air scoop to provide fresh, clean air to your engine. This intake system also includes stainless steel hardware and automotive grade urethane couplers. No cutting or drilling is required for an easy installation process that does not require aftermarket tuning for exceptional HORSEPOWER and TORQUE GAINS. , , The EVO9204 was precisely tuned and tested on our in-house dyno to replicate stock fueling while increasing horsepower and torque. The EVO9204 system features our 2-piece box design that incorporates our boost plenum, a massive SuperNano-Web dry air filter, a smooth rotational molded induction tube for reduced restriction levels, and premium hardware. Every Injen Evolution air induction system utilizes Injen's proprietary SuperNano-Web dry air filters. The Evolution induction systems utilize some of the largest filters on the market employing super deep filter pleats, with some measuring over 1.25"deep! This particular intake kit also features our SHUR-LOCK mounting system on the air filter to ensure a non-slip seal. The EVO9204 cold air intake system was designed to use the maximum space available under the hood to ensure optimum breathing room and extreme performance. The Evolution can't be stopped?.. Roto-molded Housing and Boost Plenum; The EVO9204 system features our 2-piece box design that incorporates our boost plenum. Designed 100% in 3D ensures a hassle free, drop-in installation ? this intake system attaches directly to the original factory airbox. Forward facing ram air scoop to provide cool, fresh air to your hungry engine, ,

• This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Durable Roto-Molded XLPE Polyethylene housing and intake tube
• Aggressive underHood appearance while maintaining an OE fit
• Dyno Proven gains of up to 23 hp and 33 lb-ft. of torque
• Stainless steel band clamps with inner protective liner
• Fully serviceable Injen SuperNano-Web dry air filter
• Reinforced automotive grade silicone couplers
• Replacement air filter part number X-1130-BB
• Designed to work with the stock calibration
• Stainless Steel Hardware/Clamps And Screws
• Aggressive intake growl under acceleration
• Injen Technology Limited Lifetime Warranty
• Made in Pomona, California USA
• forward facing ram air scoop
• Fully functioning

This Part Fits:

The Evolution of cold air intakes is here. The Evolution cold air intake system by Injen Technology is the next generation of performance intake systems. The EVO9203 is specifically engineered for the 2015-2019 Ford Mustang with the 2.3L EcoBoost engine. Every EVO9203 cold air intake is made in the USA from cross linked high density polyethylene for extreme durability. The box has a forward facing ram air scoop to provide fresh, clean air to your engine. This intake system also includes stainless steel hardware and automotive grade urethane couplers. No cutting or drilling is required for an easy installation process that does not require aftermarket tuning for exceptional HORSEPOWER and TORQUE GAINS. , , The EVO9203 was precisely tuned and tested on our in-house dyno to replicate stock fueling while increasing horsepower and torque. The EVO9203 system features our 2-piece box design that incorporates our boost plenum, a massive SuperNano-Web dry air filter, a smooth rotational molded induction tube for reduced restriction levels, and premium hardware. Every Injen Evolution air induction system utilizes Injen's proprietary SuperNano-Web dry air filters. The Evolution induction systems utilize some of the largest filters on the market employing super deep filter pleats, with some measuring over 1.25"deep! This particular intake kit also features our SHUR-LOCK mounting system on the air filter to ensure a non-slip seal. The EVO9203 cold air intake system was designed to use the maximum space available under the hood to ensure optimum breathing room and extreme performance. The Evolution can't be stopped?.. Roto-molded Housing and Boost Plenum; The EVO9203 system features our 2-piece box design that incorporates our boost plenum. Designed 100% in 3D ensures a hassle free, drop-in installation ? this intake system attaches directly to the original factory airbox. Forward facing ram air scoop to provide cool, fresh air to your hungry turbos! , ,

• This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Durable Roto-Molded XLPE Polyethylene housing and intake tube
• Aggressive underHood appearance while maintaining an OE fit
• Dyno Proven gains of up to 15 hp and 16 lb-ft. of torque
• Stainless steel band clamps with inner protective liner
• Fully serviceable Injen SuperNano-Web dry air filter
• Reinforced automotive grade silicone couplers
• Replacement air filter part number X-1130-BB
• Designed to work with the stock calibration
• Stainless Steel Hardware/Clamps And Screws
• Aggressive intake growl under acceleration
• Injen Technology Limited Lifetime Warranty
• Made in Pomona, California USA
• forward facing ram air scoop
• Fully functioning

This Part Fits:

The EVO9202 was precisely tuned and tested on our in-house dyno to replicate stock fueling while increasing horsepower and torque. The EVO9202 system features our patent-pending twist-lock system that eases the installation process and securely mounts a massive SuperNano-Web dry air filter. Injen has a smooth rotational molded induction tube for reduced restriction levels and premium hardware for easy installation. Every Injen Evolution air induction system utilizes Injen's proprietary SuperNano-Web dry air filters. The Evolution induction systems utilize some of the largest filters on the market employing super deep filter pleats, with some measuring over 1.25"deep! The EVO9202 cold air intake system was designed to use the maximum space available under the hood to ensure optimum breathing room and extreme performance. The Evolution can't be stopped?..

• Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Aggressive under hood appearance while maintaining an OE fit
• Aggressive Under Hood Appearance While Maintaining OE Fit
• Dyno Proven gains of up to 26 hp and 23 lb-ft. of torque
• Durable Roto-Molded Polyethylene housing and intake tube
• Stainless steel band clamps with inner protective liner
• Fully serviceable Injen SuperNano-Web dry air filter
• Fully functioning, forward facing ram air scoop
• Reinforced automotive grade silicone couplers
• Replacement air filter part number X-1107-BB
• Designed to work with the stock calibration
• Aggressive intake growl under acceleration
• Injen Technology Limited Lifetime Warranty
• Made in Pomona California, USA

This Part Fits:

The Evolution of cold air intakes is here. The Evolution cold air intake system by Injen Technology is the next generation of performance intake systems. The EVO9108 is specifically engineered for the 2011-2014 Ford F-150 with the 5.0L engine. Every EVO9108 cold air intake is made in the USA from cross linked high density polyethylene for extreme durability. The box has a forward facing ram air scoop to provide fresh, clean air to your engine. This intake system also includes stainless steel hardware and automotive grade urethane couplers. No cutting or drilling is required for an easy installation process that does not require aftermarket tuning for exceptional HORSEPOWER and TORQUE GAINS. , , The EVO9108 was precisely tuned and tested on our in-house dyno to replicate stock fueling while increasing horsepower and torque. The EVO9108 system features our 2-piece box design that incorporates our boost plenum, a massive SuperNano-Web dry air filter, a smooth 6061 aluminum induction tube for reduced restriction levels, and premium hardware. Every Injen Evolution air induction system utilizes Injen's proprietary SuperNano-Web dry air filters. The Evolution induction systems utilize some of the largest filters on the market employing super deep filter pleats, with some measuring over 1.25"deep! This particular intake kit also features our SHUR-LOCK mounting system on the air filter to ensure a non-slip seal. The EVO9108 cold air intake system was designed to use the maximum space available under the hood to ensure optimum breathing room and extreme performance. The Evolution can't be stopped?.. Roto-molded Housing and Boost Plenum; The EVO9108 system features our 2-piece box design that incorporates our boost plenum. Designed 100% in 3D ensures a hassle free, drop-in installation ? this intake system attaches directly to the original factory airbox. Forward facing ram air scoop to provide cool, fresh air to your hungry turbos! , ,

• This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Attaches directly to the factory airbox for a drop-in installation
• Durable Roto-Molded XLPE Polyethylene housing and intake tube
• Aggressive underHood appearance while maintaining an OE fit
• Dyno Proven gains of up to 17 hp and 16 lb-ft. of torque
• Stainless steel band clamps with inner protective liner
• Fully serviceable Injen SuperNano-Web dry air filter
• Reinforced automotive grade silicone couplers
• Replacement air filter part number X-1129-BB
• Designed to work with the stock calibration
• Stainless Steel Hardware/Clamps And Screws
• Aggressive intake growl under acceleration
• Injen Technology Limited Lifetime Warranty
• Made in Pomona, California USA

This Part Fits:

Give your 2015-2020 F-150/F-150 Raptor, Expedition, or Lincoln Navigator that added punch you crave with the EVO9107C Evolution Cold Air Intake System by Injen Technology. The EVO9107 is specifically engineered for the 2.7L and 3.5L EcoBoost engine. Every EVO9107 cold air intake is made in the USA from cross linked high density polyethylene for extreme durability. No cutting or drilling required for an easy installation process that does not require aftermarket tuning for exceptional HORSEPOWER and TORQUE GAINS right out of the box!

• Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Intake scoop is designed to capture the largest amount of cool air
• Aggressive under hood appearance while maintaining an OE fit
• Dyno Proven gains of up to 14 hp and 15 lb-ft. of torque
• Stainless steel band clamps with inner protective liner
• Fully serviceable Injen SuperNano-Web dry air filter
• Durable Roto-Molded Polyethylene housing and scoop
• Reinforced automotive grade silicone couplers
• Replacement air filter part number X-1125-BB
• Designed to work with the stock calibration
• Stainless Steel Hardware/Clamps And Screws
• Aggressive intake growl under acceleration
• Injen Technology Limited Lifetime Warranty
• Optional hydroshield part number 1073BLK
• Made in Pomona California, USA

This Part Fits:

The Evolution of cold air intakes is here. The Evolution cold air intake system by Injen Technology is the next generation of performance intake systems. The EVO9105 is specifically engineered for the 2011-2014 Ford F-150 with the 3.5L EcoBoost engine. Every EVO9105 cold air intake is made in the USA from cross linked high density polyethylene for extreme durability. The box has a forward facing ram air scoop to provide fresh, clean air to your engine. This intake system also includes stainless steel hardware and automotive grade urethane couplers. No cutting or drilling is required for an easy installation process that does not require aftermarket tuning for exceptional HORSEPOWER and TORQUE GAINS. , , The EVO9105 was precisely tuned and tested on our in-house dyno to replicate stock fueling while increasing horsepower and torque. The EVO9105 system features our 2-piece box design that incorporates our boost plenum, a massive SuperNano-Web dry air filter, a smooth Rotomolded induction tube for reduced restriction levels, and premium hardware. Every Injen Evolution air induction system utilizes Injen's proprietary SuperNano-Web dry air filters. The Evolution induction systems utilize some of the largest filters on the market employing super deep filter pleats, with some measuring over 1.25"deep! This particular intake kit also features our SHUR-LOCK mounting system on the air filter to ensure a non-slip seal. The EVO9105 cold air intake system was designed to use the maximum space available under the hood to ensure optimum breathing room and extreme performance. The Evolution can't be stopped?.. Roto-molded Housing and Boost Plenum; The EVO9105 system features our 2-piece box design that incorporates our boost plenum. Designed 100% in 3D ensures a hassle free, drop-in installation. Forward facing ram air scoop to provide cool, fresh air to your hungry turbos! , ,

• This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Attaches directly to the factory airbox for a drop-in installation
• Durable Roto-Molded XLPE Polyethylene housing and intake tube
• Aggressive underHood appearance while maintaining an OE fit
• Dyno Proven gains of up to 18 hp and 21 lb-ft. of torque
• Stainless steel band clamps with inner protective liner
• Fully serviceable Injen SuperNano-Web dry air filter
• Reinforced automotive grade silicone couplers
• Replacement air filter part number X-1129-BB
• Designed to work with the stock calibration
• Stainless Steel Hardware/Clamps And Screws
• Aggressive intake growl under acceleration
• Injen Technology Limited Lifetime Warranty
• Made in Pomona, California USA

This Part Fits:

Give your 2015-2020 F-150/F-150 Raptor, Expedition, or Lincoln Navigator that added punch you crave with the EVO9104 Evolution Cold Air Intake System by Injen Technology. The EVO9104 is specifically engineered for the 2.7L and 3.5L EcoBoost engine. Every EVO9104 cold air intake is made in the USA from cross-linked high-density XLPE polyethylene for extreme durability. No cutting or drilling required for an easy installation process that does not require aftermarket tuning for exceptional HORSEPOWER and TORQUE GAINS right out of the box!

• Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Unique and Patented Twist Lock Filter-to-Housing attachment for Easy Installation
• Clear-Vue Window Provides Easy Inspection of Filter Without Disassembly
• Durable XLPE Crosslinked Roto-Molded Polyethylene housing and scoop
• Intake scoop is designed to capture the largest amount of cool air
• Also available with a Dry Air Filter: Intake system P/N EVO9104
• Aggressive under hood appearance while maintaining an OE fit
• Optional Injen air filter cleaning kit part number X-1030
• Dyno Proven gains of up to 19 hp and 21 lb-ft. of torque
• Stainless steel band clamps with inner protective liner
• Fully serviceable Injen SuperNano-Web dry air filter
• Replacement air filter part number X-1116-BR
• Designed to work with the stock calibration
• Stainless Steel Hardware/Clamps And Screws
• Aggressive intake growl under acceleration
• Injen Technology Limited Lifetime Warranty
• Made in Pomona California, USA
• Does NOT fit hybrid models

This Part Fits:

Give your 2015-2020 F-150/F-150 Raptor, Expedition, or Lincoln Navigator that added punch you crave with the EVO9104 Evolution Cold Air Intake System by Injen Technology. The EVO9104 is specifically engineered for the 2.7L and 3.5L EcoBoost engine. Every EVO9104 cold air intake is made in the USA from cross-linked high-density XLPE polyethylene for extreme durability. No cutting or drilling required for an easy installation process that does not require aftermarket tuning for exceptional HORSEPOWER and TORQUE GAINS right out of the box!

• Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Unique and Patented Twist Lock Filter-to-Housing attachment for Easy Installation
• Also available with a 8-Layer Oiled Air Filter: Intake system P/N EVO9104C
• Clear-Vue Window Provides Easy Inspection of Filter Without Disassembly
• Durable XLPE Crosslinked Roto-Molded Polyethylene housing and scoop
• Intake scoop is designed to capture the largest amount of cool air
• Aggressive under hood appearance while maintaining an OE fit
• Dyno Proven gains of up to 19 hp and 21 lb-ft. of torque
• Stainless steel band clamps with inner protective liner
• Fully serviceable Injen SuperNano-Web dry air filter
• Replacement air filter part number X-1116-BB
• Designed to work with the stock calibration
• Injen Technology Limited Lifetime Warranty
• Aggressive intake growl under acceleration
• Stainless Steel Hardware/Clamps And Screws
• Made in Pomona California, USA
• Does NOT fit hybrid models

This Part Fits:

Your search for the best performing cold air intake that also protects your valuable 2020-2024 Ford F-Series Super Duty is over. You just found the Injen EVO9007C that is specifically engineered for the 2020-2024 Ford Super Duty trucks equipped with the 6.7L Power Stroke diesel engine. We've taken every ounce of our 20+ years of experience to create the most versatile kit on the market today, without complicating the installation process. With an incredible 63 additional lb-ft. of torque at the pedal, you can be sure that your truck is more than equipped to tackle towing just about any load, all while retaining factory fuel trims and A/F ratios to prevent damage to your expensive motor.

• Our clear inspection badge allows you to quickly check the condition of your air filter while the red stripe enhances under hood appearances.
• Massive intake tube that tapers down from 5in OD to increase airflow velocity at the turbo inlet
• Works seamlessly with our hot and cold side charge pipe system P/N SES9004ICP or SES9004ICPWB
• Includes removable Urethane Plugs for heavily tuned trucks that require additional airflow
• Also available as a kit with our Dry Air Filter: Intake system P/N EVO9007
• This intake is CARB approved under EO# D-476-13 for model years 2020-2022.
• No Tune Required - Designed to work seamless with the stock calibration
• Intake tube features Injen's patented internal MegaRam (MR) Technology
• Durable XLPE Roto-Molded Polyethylene tube and filter housing
• Fully serviceable Injen 8-Layer Oiled Cotton Gauze Air Filter
• Aggressive under hood appearance while maintaining an OE fit
• Dyno Proven gains of up to 28 hp and 63 lb.-ft. of torque
• Utilizes our patented Twist-Lock Filter attachment system
• Optional Injen air filter cleaning kit part number X-1030
• Stainless steel band clamps with inner protective liner
• 2023-2024 models have not yet received CARB approval
• Reinforced automotive grade silicone couplers
• Injen Technology Limited Lifetime Warranty
• Replacement air filter # X-1116-BR
• Made in Pomona California, USA

This Part Fits:

Your search for the best performing cold air intake that also protects your valuable 2020-2024 Ford F-Series Super Duty is over. You just found the Injen EVO9007 that is specifically engineered for the 2020-2024 Ford Super Duty trucks equipped with the 6.7L Power Stroke diesel engine. We've taken every ounce of our 20+ years of experience to create the most versatile kit on the market today, without complicating the installation process. With an incredible 63 additional lb-ft. of torque at the pedal, you can be sure that your truck is more than equipped to tackle towing just about any load, all while retaining factory fuel trims and A/F ratios to prevent damage to your expensive motor.

• Our clear inspection badge allows you to quickly check the condition of your air filter while the red stripe enhances under hood appearances.
• Massive intake tube that tapers down from 5in OD to increase airflow velocity at the turbo inlet
• Works seamlessly with our hot and cold side charge pipe system P/N SES9004ICP or SES9004ICPWB
• Includes removable Urethane Plugs for heavily tuned trucks that require additional airflow
• Also available as a kit with our 8-Layer Oiled Air Filter: Intake system P/N EVO9007C
• This intake is CARB approved under EO# D-476-13 for model years 2020-2022.
• No Tune Required - Designed to work seamless with the stock calibration
• Intake tube features Injen's patented internal MegaRam (MR) Technology
• Durable XLPE Roto-Molded Polyethylene tube and filter housing
• Aggressive under hood appearance while maintaining an OE fit
• Dyno Proven gains of up to 28 hp and 63 lb.-ft. of torque
• Utilizes our patented Twist-Lock Filter attachment system
• Stainless steel band clamps with inner protective liner
• Fully serviceable Injen SuperNano-Web dry air filter
• 2023-2024 models have not yet received CARB approval
• Reinforced automotive grade silicone couplers
• Injen Technology Limited Lifetime Warranty
• Replacement air filter # X-1116-BB
• Made in Pomona California, USA

This Part Fits:

The Evolution of cold air intakes is here. The Evolution cold air intake system by Injen Technology is the next generation of performance intake systems. The EVO9006 is specifically engineered for the 2011-2016 Ford Diesel Trucks with the 6.7L Powerstroke engine. Every EVO9006 cold air intake is made in the USA from cross linked high density polyethylene for extreme durability. They include stainless steel hardware and automotive grade urethane couplers. No cutting or drilling required for an easy installation process that does not require aftermarket tuning for exceptional HORSEPOWER and TORQUE GAINS. , , The EVO9006 was precisely tuned and tested on our in-house dyno to replicate stock fueling while increasing horsepower and torque. The EVO9006 system features our 2-piece box design that incorporates our boost plenum, a massive 360? SuperNano-Web dry air filter, a smooth Rotomolded induction tube for reduced restriction levels, and premium hardware. Every Injen Evolution air induction system utilizes Injen's proprietary SuperNano-Web dry air filters. The Evolution induction systems utilize some of the largest filters on the market employing super deep filter pleats, with some measuring over 1.25"deep! This particular intake kit also features our SHUR-LOCK mounting system on the air filter to ensure a non-slip seal. The EVO9006 cold air intake system was designed to use the maximum space available under the hood to ensure optimum breathing room and extreme performance. The Evolution can't be stopped?.. Roto-molded Housing and Boost Plenum; The EVO9006 system features our 2-piece box design that incorporates our boost plenum. Designed 100% in 3D ensures a hassle free, drop-in installation. Engineered to work seamlessly with the factory ram air system. Roto-molded Intake Tube; The EVO9006 Evolution Cold Air Intake System uses a custom designed and dyno-tuned intake tube to produce huge power gains while retaining an OE quality fit. , ,

• This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Durable Roto-Molded XLPE Polyethylene housing and intake tube
• Aggressive underHood appearance while maintaining an OE fit
• Dyno Proven gains of up to 19 hp and 52 lb-ft. of torque
• Stainless steel band clamps with inner protective liner
• Fully serviceable Injen SuperNano-Web dry air filter
• Reinforced automotive grade silicone couplers
• Replacement air filter part number X-1124-BB
• Designed to work with the stock calibration
• Stainless Steel Hardware/Clamps And Screws
• Injen Technology Limited Lifetime Warranty
• Aggressive intake growl under acceleration
• Optional hydroshield part number 1072BLK
• Made in Pomona, California USA

This Part Fits:

The Evolution of cold air intakes is here. The Evolution cold air intake system by Injen Technology is the next generation of performance intake systems. The EVO9005 is specifically engineered for the 2008-2010 Ford Diesel Trucks with the 6.4L Powerstroke engine. Every EVO9005 cold air intake is made in the USA from cross linked high density polyethylene for extreme durability. They include stainless steel hardware and automotive grade urethane couplers. No cutting or drilling required for an easy installation process that does not require aftermarket tuning for exceptional HORSEPOWER and TORQUE GAINS. , , The EVO9005 was precisely tuned and tested on our in-house dyno to replicate stock fueling while increasing horsepower and torque. The EVO9005 system features our 2-piece box design that incorporates our boost plenum, a massive 360? SuperNano-Web dry air filter, a smooth Rotomolded induction tube for reduced restriction levels, and premium hardware. Every Injen Evolution air induction system utilizes Injen's proprietary SuperNano-Web dry air filters. The Evolution induction systems utilize some of the largest filters on the market employing super deep filter pleats, with some measuring over 1.25"deep! This particular intake kit also features our SHUR-LOCK mounting system on the air filter to ensure a non-slip seal. The EVO9005 cold air intake system was designed to use the maximum space available under the hood to ensure optimum breathing room and extreme performance. The Evolution can't be stopped?.. Roto-molded Housing and Boost Plenum; The EVO9005 system features our 2-piece box design that incorporates our boost plenum. Designed 100% in 3D ensures a hassle free, drop-in installation. Engineered to work seamlessly with the factory ram air system. Roto-molded Intake Tube; The EVO9005 Evolution Cold Air Intake System uses a custom designed and dyno-tuned intake tube to produce huge power gains while retaining an OE quality fit. , ,

• This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Durable Roto-Molded XLPE Polyethylene housing and intake tube
• Aggressive underHood appearance while maintaining an OE fit
• Dyno Proven gains of up to 23 hp and 53 lb-ft. of torque
• Stainless steel band clamps with inner protective liner
• Fully serviceable Injen SuperNano-Web dry air filter
• Reinforced automotive grade silicone couplers
• Replacement air filter part number X-1126-BB
• Designed to work with the stock calibration
• Stainless Steel Hardware/Clamps And Screws
• Aggressive intake growl under acceleration
• Injen Technology Limited Lifetime Warranty
• Optional hydroshield part number 1075BLK
• Made in Pomona, California USA

This Part Fits:

Your search for the best performing cold air intake that also protects your valuable 2017-2019 Ford F-Series Super Duty is over. You just found the Injen EVO9004C that is specifically engineered for the 2017-2019 Ford Super Duty trucks equipped with the 6.7L Power Stroke diesel engine. The engineers at Injen designed a custom battery relocation box that allows the airbox to be moved safely to the front of the engine bay. This swap provides two benefits. The first benefit is moving the airbox closer and in direct alignment with the factory air inlet to feed cool, fresh air to that hungry turbo diesel. The second benefit from moving the airbox forward is the path for the intake tract is now smoothed out and requires far less bends. This results in a further reduction in restriction and increased power output.

• This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Our clear inspection badge allows you to quickly check the condition of your air filter while the red stripe enhances under hood appearances.
• Battery relocation tray allows the airbox to be moved for a cooler air charge and reduced restriction
• Massive intake tube that tapers down from 5in OD to increase airflow velocity at the turbo inlet
• No Tune Required - Designed to work seamless with the stock calibration
• Intake tube features Injen's patented internal MegaRam (MR) Technology
• Durable XLPE Roto-Molded Polyethylene tube, Battery Tray, and housing
• Also available with a dry air filter ? Intake system P/N EVO9004
• Fully serviceable Injen 8-Layer Oiled Cotton Gauze Air Filter
• Aggressive under hood appearance while maintaining an OE fit
• Dyno Proven gains of up to 20 hp and 41 lb.-ft. of torque
• Utilizes our patented Twist-Lock Filter attachment system
• Optional Injen air filter cleaning kit part number X-1030
• Stainless steel band clamps with inner protective liner
• Reinforced automotive grade silicone couplers
• Injen Technology Limited Lifetime Warranty
• Replacement air filter # X-1113-BR
• Made in Pomona California, USA

This Part Fits:

Injen's all new Evolution series sealed cold air intake system for the 2019-2024 RAM 1500 (DT) trucks equipped with the V8-5.7L is unmatched in the aftermarket. The EVO8101C is a sleek intake kit that practically drops-in by itself and provides unparalleled looks under your hood. On top that of that beautiful housing is our Clear-View window for easy filter inspection. This window has an eye-catching red stripe with a white Injen logo that really pops when you open your hood. The EVO8101C housing encloses an Injen 8-Layer oiled cotton gauze air filter utilizing our patented Twist-Lock technology for a simple install and clean looks. Injen's EVO8101C comes with all necessary hardware to provide a simple and fast installation. No cutting or drilling required for an easy installation process that does not require aftermarket tuning for exceptional HORSEPOWER and TORQUE GAINS straight out of the box.

• Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles
• Also available with our SuperNano-Web Dry Air Filter: Intake system P/N EVO8101
• Durable XLPE Roto-Molded Polyethylene tube and housing and air scoop
• Intake scoop is designed to capture the largest amount of cool air
• Smooth intake piping eliminates restrictions and improves airflow
• Fully serviceable Injen 8-Layer Oiled Cotton Gauze Air Filter
• Aggressive under hood appearance while maintaining an OE fit
• Utilizes our patented Twist-Lock Filter attachment system
• Optional Injen air filter cleaning kit part number X-1030
• Dyno Proven gains of up to 13 hp and 14 lb-ft. of torque
• Injen Clear-View badge for simple air filter inspection
• Does not fit the classic body style (DS) RAM trucks
• Reinforced automotive grade silicone couplers
• Replacement air filter part number X-1116-BR
• Designed to work with the stock calibration
• Aggressive engine tone under full throttle
• Injen Technology Limited Lifetime Warranty
• Made in Pomona California, USA

This Part Fits:

Injen's all new Evolution series sealed cold air intake system for the 2019-2024 RAM 1500 (DT) trucks equipped with the V8-5.7L is unmatched in the aftermarket. The EVO8101 is a sleek intake kit that practically drops-in by itself and provides unparalleled looks under your hood. On top that of that beautiful housing is our Clear-View window for easy filter inspection. This window has an eye-catching red stripe with a white Injen logo that really pops when you open your hood. The EVO8101 housing encloses an Injen SuperNano-Web Dry air filter utilizing our patented Twist-Lock technology for a simple install and clean looks. Injen's EVO8101 comes with all necessary hardware to provide a simple and fast installation. No cutting or drilling required for an easy installation process that does not require aftermarket tuning for exceptional HORSEPOWER and TORQUE GAINS straight out of the box.

• Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles
• Also available with an 8-Layer oiled Air FIlter: Intake system P/N EVO8101C
• Durable XLPE Roto-Molded Polyethylene tube and housing and air scoop
• Intake scoop is designed to capture the largest amount of cool air
• Smooth intake piping eliminates restrictions and improves airflow
• Aggressive under hood appearance while maintaining an OE fit
• Utilizes our patented Twist-Lock Filter attachment system
• Dyno Proven gains of up to 13 hp and 14 lb-ft. of torque
• Injen Clear-View badge for simple air filter inspection
• Fully serviceable Injen SuperNano-Web dry air filter
• Does not fit the classic body (DS) style RAM trucks
• Reinforced automotive grade silicone couplers
• Replacement air filter part number X-1116-BB
• Designed to work with the stock calibration
• Aggressive engine tone under full throttle
• Injen Technology Limited Lifetime Warranty
• Made in Pomona California, USA

This Part Fits:

Injen's all new Evolution series sealed cold air intake system for the 2009-2018 Dodge RAM 1500 and the 2019-2023 RAM 1500 (Classic) is unmatched in the aftermarket. The EVO8100C is a sleek intake kit that practically drops-in by itself and provides unparalleled looks under your hood. On top that of that beautiful housing is our Clear-View window for easy filter inspection. This window has an eye-catching red stripe with a white Injen logo that really pops when you open your hood. The EVO8100C housing encloses an Injen 8-Layer oiled cotton gauze air filter utilizing our patented Twist-Lock technology for a simple install and clean looks. Injen's EVO8100C comes with all necessary hardware to provide a simple and fast installation. No cutting or drilling required for an easy installation process that does not require aftermarket tuning for exceptional HORSEPOWER and TORQUE GAINS straight out of the box.

• This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Durable XLPE Roto-Molded Polyethylene tube and housing and air scoop
• Intake scoop is designed to capture the largest amount of cool air
• Also available with our dry Air FIlter ? Intake system P/N EVO8100
• Smooth intake piping eliminates restrictions and improves airflow
• Fully serviceable Injen 8-Layer Oiled Cotton Gauze Air Filter
• Aggressive under hood appearance while maintaining an OE fit
• Utilizes our patented Twist-Lock Filter attachment system
• Optional Injen air filter cleaning kit part number X-1030
• Dyno Proven gains of up to 12 hp and 13 lb-ft. of torque
• Injen Clear-View badge for simple air filter inspection
• Reinforced automotive grade silicone couplers
• Replacement air filter part number X-1116-BR
• Designed to work with the stock calibration
• Aggressive engine tone under full throttle
• Injen Technology Limited Lifetime Warranty
• Made in Pomona California, USA

This Part Fits:

Injen's all new Evolution series sealed cold air intake system for the 2009-2018 Dodge RAM 1500 and the 2019-2023 RAM 1500 (Classic) is unmatched in the aftermarket. The EVO8100 is a sleek intake kit that practically drops-in by itself and provides unparalleled looks under your hood. On top that of that beautiful housing is our Clear-View window for easy filter inspection. This window has an eye-catching red stripe with a white Injen logo that really pops when you open your hood. The EVO8100 housing encloses an Injen SuperNano-Web dry air filter utilizing our patented Twist-Lock technology for a simple install and clean looks. Injen's EVO8100 comes with all necessary hardware to provide a simple and fast installation. No cutting or drilling required for an easy installation process that does not require aftermarket tuning for exceptional HORSEPOWER and TORQUE GAINS straight out of the box.

• This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Also available with a 8-Layer oiled Air FIlter ? Intake system P/N EVO8100C
• Durable XLPE Roto-Molded Polyethylene tube and housing and air scoop
• Intake scoop is designed to capture the largest amount of cool air
• Smooth intake piping eliminates restrictions and improves airflow
• Aggressive under hood appearance while maintaining an OE fit
• Utilizes our patented Twist-Lock Filter attachment system
• Dyno Proven gains of up to 12 hp and 13 lb-ft. of torque
• Injen Clear-View badge for simple air filter inspection
• Fully serviceable Injen SuperNano-Web dry air filter
• Reinforced automotive grade silicone couplers
• Replacement air filter part number X-1116-BB
• Designed to work with the stock calibration
• Aggressive engine tone under full throttle
• Injen Technology Limited Lifetime Warranty
• Made in Pomona California, USA

This Part Fits:

The Evolution cold air intake system by Injen Technology is the next generation of performance intake systems and the EVO8008C is no exception. The Injen EVO8008C is specifically engineered for the 2019-2022 RAM trucks with the 6.7L Cummins Diesel engine. This amazing intake system was precisely tuned and tested on our in-house dyno to replicate stock fueling while increasing horsepower and torque across the entire powerband. The EVO8008C is a beautiful system that features our patented twist-lock filter mounting system, our patented MR technology for precise fueling without check engine lights, a massive 360 degree 8-Layer Oiled Cotton Gauze air filter, a smooth Rotomolded induction tube for reduced restriction levels, and an integrated scoop that seamlessly connects to your factory inlet to deliver that cool, crisp air that your turbo diesel demands.

• Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles
• Also available with our SuperNano-Web Dry Air Filter: Intake system P/N EVO8008
• Also available is our X-Pedal Throttle Response Controller: Part Number PT0013B
• Fully functional scoop works seamlessly with the factory ram air scoop
• Durable XLPE Roto-Molded Polyethylene tube and housing and air scoop
• Intake scoop is designed to capture the largest amount of cool air
• Smooth intake piping eliminates restrictions and improves airflow
• Fully serviceable Injen 8-Layer Oiled Cotton Gauze Air Filter
• Aggressive under hood appearance while maintaining an OE fit
• Utilizes our patented Twist-Lock Filter attachment system
• Optional Injen air filter cleaning kit part number X-1030
• Dyno Proven gains of up to 15 hp and 33 lb-ft. of torque
• Injen Clear-View badge for simple air filter inspection
• NOTE: Does not fit the classic body style RAM trucks
• Reinforced automotive grade silicone couplers
• Replacement air filter part number X-1113-BR
• Designed to work with the stock calibration
• Aggressive engine tone under full throttle
• Injen Technology Limited Lifetime Warranty
• Made in Pomona California, USA

This Part Fits:

The Evolution cold air intake system by Injen Technology is the next generation of performance intake systems and the EVO8008 is no exception. The Injen EVO8008 is specifically engineered for the 2019-2022 RAM trucks with the 6.7L Cummins Diesel engine. This amazing intake system was precisely tuned and tested on our in-house dyno to replicate stock fueling while increasing horsepower and torque across the entire powerband. The EVO8008 is a beautiful system that features our patented twist-lock filter mounting system, our patented MR technology for precise fueling without check engine lights, a massive 360 degree SuperNano-Web dry air filter, a smooth Rotomolded induction tube for reduced restriction levels, and an integrated scoop that seamlessly connects to your factory inlet to deliver that cool, crisp air that your turbo diesel demands.

• Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles
• Also available is our X-Pedal Throttle Response Controller: Part Number PT0013B
• Also available with an 8-Layer oiled Air Filter: Intake system P/N EVO8008C
• Fully functional scoop works seamlessly with the factory ram air scoop
• Durable XLPE Roto-Molded Polyethylene tube and housing and air scoop
• Intake scoop is designed to capture the largest amount of cool air
• Smooth intake piping eliminates restrictions and improves airflow
• Aggressive under hood appearance while maintaining an OE fit
• Utilizes our patented Twist-Lock Filter attachment system
• Dyno Proven gains of up to 15 hp and 33 lb-ft. of torque
• Injen Clear-View badge for simple air filter inspection
• NOTE: Does not fit the classic body style RAM trucks
• Fully serviceable Injen SuperNano-Web dry air filter
• Reinforced automotive grade silicone couplers
• Replacement air filter part number X-1113-BB
• Designed to work with the stock calibration
• Aggressive engine tone under full throttle
• Injen Technology Limited Lifetime Warranty
• Made in Pomona California, USA

This Part Fits:

The EVO8007C was precisely tuned and tested on our in-house dyno to replicate stock fueling while increasing horsepower and torque. The EVO8007C system features our 2-piece box design that incorporates our boost plenum, a massive 360-degree 8-layer oiled cotton gauze air filter, a smooth Rotomolded induction tube for reduced restriction levels, and premium hardware. The Evolution induction systems utilize some of the largest filters on the market employing super deep filter pleats, with some measuring over 1.25"deep! This particular intake kit also features our SHUR-LOCK mounting system on the air filter to ensure a non-slip seal. The EVO8007C cold air intake system was designed to use the maximum space available under the hood to ensure optimum breathing room and extreme performance. The Evolution can't be stopped?..

• Also available with our SuperNano-Web Dry Air Filter: Intake system P/N EVO8007
• Fully serviceable Injen 8-Layer Oiled Cotton Gauze Air Filter
• Aggressive under hood appearance while maintaining an OE fit
• Optional Injen air filter cleaning kit part number X-1030
• Dyno Proven gains of up to 23 hp and 65 lb-ft. of torque
• Stainless steel band clamps with inner protective liner
• Durable XLPE Roto-Molded Polyethylene tube and
• Reinforced automotive grade silicone couplers
• Replacement air filter part number X-1125-BR
• Designed to work with the stock calibration
• Aggressive intake growl under acceleration
• Injen Technology Limited Lifetime Warranty
• Made in Pomona California, USA
• CARB EO# D-476-9

This Part Fits: