Spool up the power of your Volkswagen Golf MK7 TDi 2.0L with the EVO3004 Evolution Cold Air Intake System by Injen Technology. The EVO3004 is specifically engineered for the Volkswagen Golf MK7 2.0L Turbo Diesel and features a fully integrated and functional front ram air system with dual inlets. Unlike the factory scoop that some "performance"companies retain, the Injen EVO3004 has a redesigned ram air section that utilizes booth inlets for maximum airflow. Every EVO3004 cold air intake is made in the USA from cross linked high density polyethylene for extreme durability. No cutting or drilling required for an easy installation process that does not require aftermarket tuning for exceptional HORSEPOWER and TORQUE GAINS right out of the box; The EVO3004 Cold Air Intake system features our 2-piece box design that incorporates our boost plenum, our fully integrated ram air scoop with functioning dual inlets, and a massive 360? SuperNano-Web dry air filter. Every Injen Evolution air induction system utilizes Injen's proprietary SuperNano-Web dry air filters. Don't just take our word for it, every intake system that Injen Technology produces is 100% dyno tested in-house and those results are published for anyone to see. , , Roto-molded Housing w/ integrated Ram Air Scoop; The EVO3004 system features our 2-piece box design that incorporates our boost plenum. The box is molded into our fully functional ram air scoop with dual front inlets to capture the maximum amount of cool air to feed that hungry turbo. , , Roto-molded Intake Tube; The EVO3004 Evolution Cold Air Intake System uses a custom designed and dyno-tuned intake tube to produce huge power gains while retaining an OE quality fit., ,

• This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Intake scoop is designed to capture the largest amount of cool air
• Durable Roto-Molded XLPE Polyethylene housing and intake tube
• Aggressive underHood appearance while maintaining an OE fit
• Dyno Proven gains of up to 19 hp and 24 lb-ft. of torque
• Stainless steel band clamps with inner protective liner
• Fully serviceable Injen SuperNano-Web dry air filter
• Reinforced automotive grade silicone couplers
• Replacement air filter part number X-1128-BB
• Designed to work with the stock calibration
• Stainless Steel Hardware/Clamps And Screws
• Injen Technology Limited Lifetime Warranty
• Aggressive intake growl under acceleration
• Made in Pomona, California USA

This Part Fits:

Give your MK7 Audi/Volkswagen that added punch you crave with the EVO3003 Evolution Cold Air Intake System by Injen Technology. The EVO3003 is specifically engineered for the Audi/Volkswagen MK7 with the 1.8L/2.0L engine and features a fully integrated and functional front ram air system with dual inlets. Unlike the factory scoop that some "performance" companies retain, the Injen EVO3003 has a redesigned ram air section that utilizes booth inlets for maximum airflow. Every EVO3003 cold air intake is made in the USA from cross linked high density polyethylene for extreme durability. No cutting or drilling required for an easy installation process that does not require aftermarket tuning for exceptional HORSEPOWER and TORQUE GAINS right out of the box!

• This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Intake scoop is designed to capture the largest amount of cool air
• Durable Roto-Molded XLPE Polyethylene housing and intake tube
• Aggressive underHood appearance while maintaining an OE fit
• Dyno Proven gains of up to 19 hp and 24 lb-ft. of torque
• Stainless steel band clamps with inner protective liner
• Fully serviceable Injen SuperNano-Web dry air filter
• Reinforced automotive grade silicone couplers
• Replacement air filter part number X-1128-BB
• Designed to work with the stock calibration
• Stainless Steel Hardware/Clamps And Screws
• Aggressive intake growl under acceleration
• Injen Technology Limited Lifetime Warranty
• Made in Pomona, California USA

This Part Fits:

XLPE Roto-molded Intake Tube: The EVO2300 Evolution Air Intake System uses a custom designed and dyno-tuned, intake tube to produce huge power gains while retaining an OE quality fit. The specially tapered tube starts out at a huge 5 inches and slowly tapers down to 3.5 inches to ensure massive airflow at the turbo inlet. We have also incorporated our internal MegaRam (MR) technology for safe and effective power gains. Our intake tube also incorporates a custom CNC-Machined mounting flange that imitates the stock attachment method. This positive attachment method ensures that your intake remains securely attached to the turbo without fear of it slipping off like our competitor's rubber couplers.

• Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Custom CNC machined adapter imitates how the stock tube attaches to turbo, thus preventing rubber couplers from popping off like our competition
• Our clear inspection badge allows you to quickly check the condition of your air filter while the red stripe enhances under hood appearances.
• Specially designed intake tube that transitions from 5in OD to 3.5in to increase airflow velocity at the turbo inlet
• Custom Heatshield in front of the turbo protects the intake from excessive heat soak
• Aggressive under hood appearance while maintaining an OE fit
• Features Injen?s patented internal MegaRam (MR) Technology
• Utilizes our patented Twist-Lock Filter attachment system
• Dyno Proven gains of up to 18 hp and 26 lb.-ft. of torque
• Stainless steel band clamps with inner protective liner
• Durable XLPE Roto-Molded Polyethylene tube and housing
• Fully serviceable Injen SuperNano-Web dry air filter
• Reinforced automotive grade silicone couplers
• Designed to work with the stock calibration
• Stainless Steel Hardware/Clamps And Screws
• Injen Technology Limited Lifetime Warranty
• Optional hydroshield part number 1118BLK
• Replacement air filter # X-1093-BB
• Made in Pomona California, USA

This Part Fits:

Introducing the all-new Evolution sealed air intake system Part Number EVO2202C for the Toyota 4Runner and FJ Cruiser V6 4.0L! This intake was designed using state of the art engineering tools and techniques to produce the finest quality kit that is unmatched in the aftermarket. From the one-piece sealed housing that utilizes our all new Injen Twist-Lock System to securely attach a massive 8-layer Oiled Cotton Gauze air filter in place all the way down to the premium hardware, Injen has put it all on the table to give you the best intake on the market. Here is the best part, there is no cutting or drilling required for an easy installation process that does not require aftermarket tuning for exceptional HORSEPOWER and TORQUE GAINS right out of the box!, , Roto-molded Housing; The one-piece sealed housing utilizes the all-new Injen Twist-Lock System to securely attach the 8-Layer Oiled Cotton Gauze air filter in place which eliminates the use of unnecessary parts and provides one of the simplest installations available. The EVO2202C housing also sports the all-new Injen Clear-View badge for a cleaner more aggressive under hood appearance. Integrated Ram Air Scoop; The EVO2202C comes complete with our integrated fully functional ram air scoop. The included Urethane Plug can be installed when you're taking on the toughest terrain to ensure your engine doesn't come into contact with harmful debris or water. This scoop feeds that hungry V6 with cool, fresh air for maximum performance!, , Roto-molded Intake Tube; The EVO2202C Evolution Air Intake System uses a custom designed and dyno-tuned, intake tube to produce huge power gains while retaining an OE quality fit. The intake tube also includes our patented tuning process that funnels air at a precise rate past the MAF sensor. This patented tuning process ensures accurate fuel trims and aggressive power gains without the fear of check engine lights., ,

• This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Injen Clear-Vue Window allows you to check the condition of your air filter without the need to remove it.
• Twist-Lock Technology to securely integrate the air filter to the housing
• Included Urethane Plug to seal ram air scoop in off-road wet conditions
• Ram air scoop is designed to capture the largest amount of cool air
• Fully serviceable Injen 8-Layer Oiled Cotton Gauze Air Filter
• Aggressive under hood appearance while maintaining an OE fit
• Fits in factory mounting locations for simple installation
• Optional Injen air filter cleaning kit part number X-1030
• Dyno Proven gains of up to 13 hp and 15 lb-ft. of torque
• Stainless steel band clamps with inner protective liner
• Durable Roto-Molded Polyethylene construction
• Reinforced automotive grade silicone couplers
• Designed to work with the stock calibration
• Aggressive intake growl under acceleration
• Injen Technology Limited Lifetime Warranty
• Made in Pomona California, USA

This Part Fits:

Introducing the all-new Evolution sealed air intake system Part Number EVO2202 for the Toyota 4Runner and FJ Cruiser V6 4.0L! This intake was designed using state of the art engineering tools and techniques to produce the finest quality kit that is unmatched in the aftermarket. From the one-piece sealed housing that utilizes our all new Injen Twist-Lock System (Patent Pending) to securely attach a massive SuperNano-Web Dry air filter in place all the way down to the premium hardware, Injen has put it all on the table to give you the best intake on the market. Here is the best part, there is no cutting or drilling required for an easy installation process that does not require aftermarket tuning for exceptional HORSEPOWER and TORQUE GAINS right out of the box; Roto-molded Housing; The one-piece sealed housing utilizes the all-new Injen Twist-Lock System to securely attach the SuperNano-Web Dry air filter in place which eliminates the use of unnecessary parts and provides one of the simplest installations available. The EVO2202 housing also sports the all-new Injen Clear-View badge for a cleaner more aggressive under hood appearance. Integrated Ram Air Scoop; The EVO2202 comes complete with our integrated fully functional ram air scoop. The included Urethane Plug can be installed when you're taking on the toughest terrain to ensure your engine doesn't come into contact with harmful debris or water. This scoop feeds that hungry V6 with cool, fresh air for maximum performance when you need it most!, , Roto-molded Intake Tube; The EVO2202 Evolution Air Intake System uses a custom designed and dyno-tuned, intake tube to produce huge power gains while retaining an OE quality fit. The intake tube also includes our patented tuning process that funnels air at a precise rate past the MAF sensor. This patented tuning process ensures accurate fuel trims and aggressive power gains without the fear of check engine lights., ,

• This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Injen Clear-Vue Window allows you to check the condition of your air filter without the need to remove it.
• Twist-Lock Technology to securely integrate the air filter to the housing
• Included Urethane Plug to seal ram air scoop in off-road wet conditions
• Ram air scoop is designed to capture the largest amount of cool air
• Aggressive under hood appearance while maintaining an OE fit
• Fits in factory mounting locations for simple installation
• Dyno Proven gains of up to 13 hp and 15 lb-ft. of torque
• Stainless steel band clamps with inner protective liner
• Fully serviceable Injen SuperNano-Web dry air filter
• Durable Roto-Molded Polyethylene construction
• Reinforced automotive grade silicone couplers
• Designed and Built in Pomona California, USA
• Designed to work with the stock calibration
• Aggressive intake growl under acceleration
• Injen Technology Limited Lifetime Warranty
• Optional hydroshield part number 1119BLK

This Part Fits:

Step into the world of performance with Injen Technology?s brand-new Evolution Elite air intake system, designed just for the 2024-2026 Toyota Tacoma L4 2.4L Turbo. Our R&D team poured everything into the EVO2201, using advanced CAD and CFD tech to create something that stands out for style, fit, and pure performance. The kit comes with a tough, in-house roto-molded XLPE air box and intake tube, packed with patented features that push the boundaries of what an intake system can do. At the heart of it, our famous SuperNano-Web dry air filter catches even the tiniest contaminants. Everything fits together with premium, automotive-grade hardware, so you get a rock-solid install every time. Honestly, once you try this intake, you?ll never look back. This is the Evolution Elite.

• Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Patented removable magnetic lid can transform intake into an open element system
• Provides power gains while maintaining A/F ratios with no additional tuning
• Integrated air scoop is designed to capture the largest amount of cool air
• High strength, Cross-Link Polyethylene (XLPE) roto-molded construction
• Patented built-in velocity stack for a smoother, accelerated air flow
• Patented magnetic see-through window that eases in filter monitoring
• Meticulously engineered using advanced CAD and CFD technology
• Dyno Proven gains of up to 15 whp and 19 lb-ft of torque
• Fully serviceable Injen SuperNano-Web dry air filter
• Reinforced automotive grade silicone couplers
• Replacement air filter part number X-1046-BB
• Designed to work with the stock calibration
• Aggressive engine tone under full throttle
• Injen Technology Limited Lifetime Warranty
• Optional hydroshield part number 1053BLK
• Does NOT fit i-Force Max hybrid models
• Available in multiple finish options
• Made in Pomona California, USA

This Part Fits:

Step into the world of performance with Injen Technology?s brand-new Evolution Elite air intake system, designed just for the 2024-2026 Toyota Tacoma L4 2.4L Turbo. Our R&D team poured everything into the EVO2201, using advanced CAD and CFD tech to create something that stands out for style, fit, and pure performance. The kit comes with a tough, in-house roto-molded XLPE air box and intake tube, packed with patented features that push the boundaries of what an intake system can do. At the heart of it, our famous SuperNano-Web dry air filter catches even the tiniest contaminants. Everything fits together with premium, automotive-grade hardware, so you get a rock-solid install every time. Honestly, once you try this intake, you?ll never look back. This is the Evolution Elite.

• Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Patented removable magnetic lid can transform intake into an open element system
• Provides power gains while maintaining A/F ratios with no additional tuning
• Integrated air scoop is designed to capture the largest amount of cool air
• High strength, Cross-Link Polyethylene (XLPE) roto-molded construction
• Patented built-in velocity stack for a smoother, accelerated air flow
• Patented magnetic see-through window that eases in filter monitoring
• Meticulously engineered using advanced CAD and CFD technology
• Dyno Proven gains of up to 15 whp and 19 lb-ft of torque
• Fully serviceable Injen SuperNano-Web dry air filter
• Reinforced automotive grade silicone couplers
• Replacement air filter part number X-1046-BB
• Designed to work with the stock calibration
• Aggressive engine tone under full throttle
• Injen Technology Limited Lifetime Warranty
• Optional hydroshield part number 1053BLK
• Does NOT fit i-Force Max hybrid models
• Available in multiple finish options
• Made in Pomona California, USA

This Part Fits:

Step into the world of performance with Injen Technology?s brand-new Evolution Elite air intake system, designed just for the 2024-2026 Toyota Tacoma L4 2.4L Turbo. Our R&D team poured everything into the EVO2201, using advanced CAD and CFD tech to create something that stands out for style, fit, and pure performance. The kit comes with a tough, in-house roto-molded XLPE air box and intake tube, packed with patented features that push the boundaries of what an intake system can do. At the heart of it, our famous SuperNano-Web dry air filter catches even the tiniest contaminants. Everything fits together with premium, automotive-grade hardware, so you get a rock-solid install every time. Honestly, once you try this intake, you?ll never look back. This is the Evolution Elite.

• Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Patented removable magnetic lid can transform intake into an open element system
• Provides power gains while maintaining A/F ratios with no additional tuning
• Integrated air scoop is designed to capture the largest amount of cool air
• High strength, Cross-Link Polyethylene (XLPE) roto-molded construction
• Patented built-in velocity stack for a smoother, accelerated air flow
• Patented magnetic see-through window that eases in filter monitoring
• Meticulously engineered using advanced CAD and CFD technology
• Dyno Proven gains of up to 15 whp and 19 lb-ft of torque
• Fully serviceable Injen SuperNano-Web dry air filter
• Reinforced automotive grade silicone couplers
• Replacement air filter part number X-1046-BB
• Designed to work with the stock calibration
• Aggressive engine tone under full throttle
• Injen Technology Limited Lifetime Warranty
• Optional hydroshield part number 1053BLK
• Does NOT fit i-Force Max hybrid models
• Available in multiple finish options
• Made in Pomona California, USA

This Part Fits:

Introducing the all-new Evolution sealed air intake system Part Number EVO2200C for the Toyota Tacoma V6 3.5L! This intake was designed using state of the art engineering tools and techniques to produce the finest quality kit that is unmatched in the aftermarket. From the one-piece sealed housing that utilizes our all new Injen Twist-Lock System (Patent Pending) to securely attach a massive 8-layer cotton gauze air filter in place all the way down to the premium hardware, Injen has put it all on the table to give you the best intake on the market. Here is the best part, there is no cutting or drilling required for an easy installation process that does not require aftermarket tuning for exceptional HORSEPOWER and TORQUE GAINS right out of the box!, , Roto-molded Housing; The one-piece sealed housing utilizes the all-new Injen Twist-Lock System to securely attach the 8-layer cotton gauze air filter in place which eliminates the use of unnecessary parts and provides one of the simplest installations available. The EVO2200C housing also sports the all-new Injen Clear-View badge for a cleaner more aggressive under hood appearance. Front Mounted Ram Air Scoop; The EVO2200C comes complete with our fully functional ram air scoop. This scoop feeds that hungry V6 with cool, fresh air for maximum performance!, , Roto-molded Intake Tube; The EVO2200C Evolution Air Intake System uses a custom designed and dyno-tuned, intake tube to produce huge power gains while retaining an OE quality fit. The intake tube also includes our patented tuning process that funnels air at a precise rate past the MAF sensor. This patented tuning process ensures accurate fuel trims and aggressive power gains without the fear of check engine lights., ,

• This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Injen inspection badge allows you to check the condition of your air filter
• Twist-Lock Technology to securely integrate the air filter to the housing
• Ram air scoop is designed to capture the largest amount of cool air
• Fully serviceable Injen 8-Layer Oiled Cotton Gauze Air Filter
• Aggressive underHood appearance while maintaining an OE fit
• Aggressive Under Hood Appearance While Maintaining OE Fit
• Optional Injen air filter cleaning kit part number X-1030
• Dyno Proven gains of up to 17 hp and 15 lb-ft. of torque
• Stainless steel band clamps with inner protective liner
• Durable Roto-Molded Polyethylene construction
• Reinforced automotive grade silicone couplers
• Replacement air filter part number X-1107-BR
• Designed to work with the stock calibration
• Aggressive intake growl under acceleration
• Injen Technology Limited Lifetime Warranty
• Made in Pomona, California USA
• Patent Pending

This Part Fits:

Introducing the all-new Evolution sealed air intake system Part Number EVO2200 for the Toyota Tacoma V6 3.5L! This intake was designed using state of the art engineering tools and techniques to produce the finest quality kit that is unmatched in the aftermarket. From the one-piece sealed housing that utilizes our all new Injen Twist-Lock System (Patent Pending) to securely attach a massive SuperNano-Web Dry air filter in place all the way down to the premium hardware, Injen has put it all on the table to give you the best intake on the market. Here is the best part, there is no cutting or drilling required for an easy installation process that does not require aftermarket tuning for exceptional HORSEPOWER and TORQUE GAINS right out of the box!, , Roto-molded Housing; The one-piece sealed housing utilizes the all-new Injen Twist-Lock System to securely attach the SuperNano-Web Dry air filter in place which eliminates the use of unnecessary parts and provides one of the simplest installations available. The EVO2200 housing also sports the all-new Injen Clear-View badge for a cleaner more aggressive under hood appearance. Front Mounted Ram Air Scoop; The EVO2200 comes complete with our fully functional ram air scoop. This scoop feeds that hungry V6 with cool, fresh air for maximum performance!, , Roto-molded Intake Tube; The EVO2200 Evolution Air Intake System uses a custom designed and dyno-tuned, intake tube to produce huge power gains while retaining an OE quality fit. The intake tube also includes our patented tuning process that funnels air at a precise rate past the MAF sensor. This patented tuning process ensures accurate fuel trims and aggressive power gains without the fear of check engine lights., ,

• This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Injen inspection badge allows you to check the condition of your air filter
• Twist-Lock Technology to securely integrate the air filter to the housing
• Ram air scoop is designed to capture the largest amount of cool air
• Aggressive underHood appearance while maintaining an OE fit
• Aggressive Under Hood Appearance While Maintaining OE Fit
• Dyno Proven gains of up to 17 hp and 15 lb-ft. of torque
• Fully serviceable Injen SuperNano-Web dry air filter
• Reinforced automotive grade silicone couplers
• Durable Roto-Molded Polyethylene construction
• Replacement air filter part number X-1107-BB
• Designed to work with the stock calibration
• Aggressive intake growl under acceleration
• Injen Technology Limited Lifetime Warranty
• Optional hydroshield part number 1119BLK
• Made in Pomona, California USA
• Patent Pending

This Part Fits:

8-Layer Oiled Cotton Gauze Air Filter: The Injen 8-Layer oil cotton gauze air filter is included with the EVO2100C cold air intake. This filter is uniquely designed to work with the Injen Twist-Lock System. Using our Twist-Lock technology has allowed our technicians to use the largest filter available for this application, which enhances the air volume - resulting in increased power gains while making this installation process quick and easy. , , Quality Hardware: From the Stainless Steel Band Clamps with an inner protective liner to the reinforced automotive grade silicone coupler, every aspect is covered for a perfect and reliable fit. , , Hassle-Free Installation: Keep it simple! Every Injen Evolution Cold Air intake that uses our Twist-Lock System has been strategically designed to utilize fewer parts and tools to provide the end user with one of the swiftest and most manageable installations available on the market today. Dyno Proven: Plain and simple, NUMBERS talk! Injen has a strong legacy of designing and thoroughly testing every product we develop and the EVO2100C clearly benefits from our dedication to performance. Our engineers put in countless hours of testing to prove that we have developed the safest, highest performing kit on the market. With 14 additional horsepower and 13 Ft.-lbs. of torque, Injen is proud to say that the EVO2100C Evolution Cold Air Intake system is the very best intake system for your Toyota Tundra that money can buy.

• This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Fully serviceable Injen 8-Layer Oiled Cotton Gauze Air Filter
• Aggressive under hood appearance while maintaining an OE fit
• Optional Injen air filter cleaning kit part number X-1030
• Dyno Proven gains of up to 14 hp and 13 lb-ft. of torque
• Durable Roto-Molded Polyethylene housing and intake tube
• Injen Clear-View badge for simple air filter inspection
• Stainless steel band clamps with inner protective liner
• Reinforced automotive grade silicone couplers
• Replacement air filter part number X-1107-BR
• Designed to work with the stock calibration
• Aggressive intake growl under acceleration
• Injen Technology Limited Lifetime Warranty
• Optional hydroshield part number 1119BLK
• Made in Pomona California, USA
• Injen Inspection Badge

This Part Fits:

SuperNano-Web Dry Air Filter: The Injen SuperNano-Web Dry air filter is included with the EVO2100 cold air intake. This filter is uniquely designed to work with the Injen Twist-Lock System. Using our Twist-Lock technology has allowed our technicians to use the largest filter available for this application, which enhances the air volume - resulting in increased power gains while making this installation process quick and easy. , , Quality Hardware: From the Stainless Steel Band Clamps with an inner protective liner to the reinforced automotive grade silicone coupler, every aspect is covered for a perfect and reliable fit. , , Hassle-Free Installation: Keep it simple! Every Injen Evolution Cold Air intake that uses our Twist-Lock System has been strategically designed to utilize fewer parts and tools to provide the end user with one of the swiftest and most manageable installations available on the market today. Dyno Proven: Plain and simple, NUMBERS talk! Injen has a strong legacy of designing and thoroughly testing every product we develop and the EVO2100 clearly benefits from our dedication to performance. Our engineers put in countless hours of testing to prove that we have developed the safest, highest performing kit on the market. With 14 additional horsepower and 13 Ft.-lbs.of torque, Injen is proud to say that the EVO2100 Evolution Cold Air Intake system is the very best intake system for your Toyota Tundra that money can buy.

• This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Aggressive under hood appearance while maintaining an OE fit
• Dyno Proven gains of up to 14 hp and 13 lb-ft. of torque
• Durable Roto-Molded Polyethylene housing and intake tube
• Injen Clear-View badge for simple air filter inspection
• Stainless steel band clamps with inner protective liner
• Fully serviceable Injen SuperNano-Web dry air filter
• Reinforced automotive grade silicone couplers
• Replacement air filter part number X-1107-BB
• Designed to work with the stock calibration
• Aggressive intake growl under acceleration
• Injen Technology Limited Lifetime Warranty
• Optional hydroshield part number 1119BLK
• Made in Pomona California, USA
• Injen Inspection Badge

This Part Fits:

Roto-molded Intake Tube: The EVO2001 Evolution Cold Air Intake System uses a custom designed and dyno-tuned intake tube to produce huge power gains while retaining an OE quality fit. The intake tube also includes our patented tuning process that funnels air at a precise rate past the MAF sensor. This patented tuning process ensures accurate fuel trims and aggressive power gains without the fear of check engine lights. SuperNano-Web Dry Air Filter: "That's massive!"is all you will hear about this SuperNano-Web Dry air filter that is included with the EVO2001 cold air intake system. Using the largest filter possible for this application has increased the available air volume - resulting in added power while keeping the installation process quick and simple. , , Quality Hardware: From the Stainless Steel Band Clamps with an inner protective liner to the reinforced automotive grade silicone coupler, every aspect is covered for a perfect and reliable fit. , , Hassle-Free Installation: Make it easy! By designing this kit in a 3D workspace, you're ensured a quick and easy installation that not only increases the power output of your engine, but also provides a clean and powerful look that others see every time you pop your hood. Dyno Proven: Plain and simple, NUMBERS talk! Injen has a strong legacy of designing and thoroughly testing every product we develop and the EVO2001 clearly benefits from our dedication to performance. Our engineers put in countless hours of testing to prove that we have developed the safest, highest performing kit on the market. With 15 additional horsepower and 11 Ft.-lbs. of torque, Injen is proud to say that the EVO2001 Evolution Cold Air Intake system is the very best intake system for your Nissan/Infiniti that money can buy.

• This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Intake scoop is designed to capture the largest amount of cool air
• Aggressive underHood appearance while maintaining an OE fit
• Optional Rain Guard sold separately part number EVO2000RG
• Dyno Proven gains of up to 15 hp and 11 lb-ft. of torque
• Stainless steel band clamps with inner protective liner
• Fully serviceable Injen SuperNano-Web dry air filter
• Durable Roto-Molded Polyethylene Construction
• Reinforced automotive grade silicone couplers
• Replacement air filter part number X-1131-BB
• Designed to work with the stock calibration
• Stainless Steel Hardware/Clamps And Screws
• Aggressive intake growl under acceleration
• Injen Technology Limited Lifetime Warranty
• Made in Pomona, California USA

This Part Fits:

You've decided on the very best intake system on the market for your Subaru BR-Z / Toyota FR-S / Toyota GT-86 platform by purchasing the Injen EVO2001 intake system, but now you have concerns about the ram air scoop during heavy rainfall. Well my friend, fear no more. Injen has developed this rain shield to help prevent rain water from directly entering your intake system under normal driving situations. Please note that this rain guard does not make your vehicle a submarine, so please use caution when driving in rainy situations. This EVO2000RG air intake rain guard is designed specifically for use with the Injen intake system Part No. EVO2001. Our rain guard is designed to deliver trouble free and consistent performance. Made from high-quality materials for ultimate durability. Manufactured in the USA and engineered to meet or exceed strict quality requirements. IMPORTANT NOTICE; The EVO2000RG is an accessory that requires our EVO2001 cold air intake system to function properly. The EVO2001 was designed specifically for the BR-Z / FR-S / GT-86 and is one of the top selling intakes on the market!

• The EVO2000RG rain guard is designed to deliver trouble free and consistent performance.
• Manufactured Up To Meet Or Exceed Strict Quality Requirements
• Made from high-quality materials for ultimate durability.
• Must be used with Injen's EVO2001 Cold Air Intake
• Provides extra protection in heavy rainfall
• Injen Technology Limited Lifetime Warranty
• Made in Pomona, California USA

This Part Fits:

Crank up the performance of your Nissan/Infiniti SUV with Injen's all-new EVO1901 Evolution sealed cold air intake system. The EVO1901 was designed specifically for the 2012-13 Infiniti QX56, the 2014-2023 Infiniti QX80, and the 2017-2023 Nissan Armada all with the powerful 5.6L V8 engine. The EVO1901 cold air intake was designed using advanced engineering tools to offer a top quality kit that has no parallel. The EVO1901 one-piece sealed housing utilizes our patent pending Twist-Lock technology to securely fasten our SuperNano-Web Dry air filter in place. Injen has put it all on the table to give you the greatest intake system possible!, , Roto-molded Housing; The one-piece sealed housing utilizes the all-new Injen Twist-Lock System to securely attach the SuperNano-Web Dry air filter in place. The Twist-Lock system eliminates the use of unnecessary parts and gives you one of the simplest installations available. The EVO1901 housing also includes our Injen Clear-View badge for a cleaner, more aggressive under hood appearance. Roto-molded Intake Tube; The EVO1901 Evolution Cold Air Intake System uses a custom designed and dyno-tuned intake tube to produce huge power gains while retaining an OE quality fit. The intake tube also includes our patented tuning process that funnels air at a precise rate past the MAF sensor. This patented tuning process ensures accurate fuel trims and aggressive power gains without the fear of check engine lights. , ,

• This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Durable Roto-Molded XLPE Polyethylene housing and intake tube
• Aggressive underHood appearance while maintaining an OE fit
• Dyno Proven gains of up to 13 hp and 17 lb-ft. of torque
• Stainless steel band clamps with inner protective liner
• Injen Clear-View badge for simple air filter inspection
• Fully serviceable Injen SuperNano-Web dry air filter
• Reinforced automotive grade silicone couplers
• Replacement air filter part number X-1107-BB
• Designed to work with the stock calibration
• Stainless Steel Hardware/Clamps And Screws
• Injen Technology Limited Lifetime Warranty
• Aggressive intake growl under acceleration
• Optional hydroshield part number 1119BLK
• Made in Pomona, California USA

This Part Fits:

Give your Mitsubishi Lancer Evolution X that added punch you crave with the EVO1801 Evolution Cold Air Intake System by Injen Technology. The EVO1801 is specifically engineered for the 2008-2015 Mitsubishi Lancer Evolution X with the 2.0L turbo engine. Every EVO1801 cold air intake is made in the USA from cross linked high density polyethylene for extreme durability. No cutting or drilling required for an easy installation process that does not require aftermarket tuning for exceptional HORSEPOWER and TORQUE GAINS right out of the box; The EVO1801 intake tube was precisely tested and tuned on our in-house dyno to replicate stock fueling while increasing horsepower and torque. The Mitsubishi Lancer Evolution X ECU is very sensitive to modifications and will not accept most aftermarket intake kits without the use of an additional and costly tuner. This is not the case with the Injen Evolution cold air intake. Our intake tube incorporates our patented our patented MR technology to provide safe and reliable fuel trim levels, all without the use of an aftermarket tuner; The EVO1801 Cold Air Intake system features our 2-piece box design that incorporates our boost plenum, our fully integrated ram air scoop, and a massive 360? SuperNano-Web dry air filter. Every Injen Evolution air induction system utilizes Injen's proprietary SuperNano-Web dry air filters. Don't just take our word for it, every intake system that Injen Technology produces is 100% dyno tested in-house and those results are published for anyone to see. , , Roto-molded Housing and Ram Air Scoop; The EVO1801 system features our 2-piece box design that incorporates our boost plenum. The box is molded into our fully functional ram air scoop to capture the maximum amount of cool air to feed that hungry turbo. , ,

• This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Intake scoop is designed to capture the largest amount of cool air
• Aggressive underHood appearance while maintaining an OE fit
• Dyno Proven gains of up to 35 hp and 30 lb-ft. of torque
• Stainless steel band clamps with inner protective liner
• Fully serviceable Injen SuperNano-Web dry air filter
• Optional Rain Guard sold separately - P/N: EVO1800RG
• Durable Roto-Molded Polyethylene housing and scoop
• Reinforced automotive grade silicone couplers
• Replacement air filter part number X-1128-BB
• Designed to work with the stock calibration
• Stainless Steel Hardware/Clamps And Screws
• Aggressive intake growl under acceleration
• Injen Technology Limited Lifetime Warranty
• Made in Pomona, California USA

This Part Fits:

When you're out on the trails, you need your Jeep to be durable and dependable, ensuring that you and your Jeep make it home every time. Keep that in mind while reviewing the competitors snorkels and the materials used to manufacture them. Some of our competitors use an inferior HDPE linear polyethylene or even a weaker LLDPE to mold their snorkels. HDPE is cheap for manufacturing but doesn't come close to the strength and durability of the XLPE polyethylene that Injen uses. XLPE has 20 times the environmental stress crack resistance of HDPE, 10 times the molecular weight of HDPE, and 5 times the impact and tensile strength of HDPE. In other words, Injen's Evolution intake systems are built tough and designed to get you anywhere you want to go. Period!

• Elevated air inlet location keeps fresh, clean air feeding your engine, even in the dustiest of conditions
• Manufactured from high grade XLPE cross-linked polyethylene for the ultimate in durability
• Must be used with one of the following Injen intake systems (Model & Engine dependent):
• Proper installation helps prevents water incursion during high-water crossings
• Effectively moves the air intake inlet to the roof line of your Jeep
• Two Piece design eases installation and provides a custom look
• Use our EVO5005 (Dry Filter) or EVO5005C (Oiled Cotton Filter)
• Use our EVO5006 (Dry Filter) or EVO5006C (oiled Cotton Filter)
• Does not work with OE or other aftermarket Intake Systems
• No tuning required; simply install and enjoy the trails!
• Easy Installation; Minor hood modification is required
• Aggressive intake growl under spirited acceleration
• Works seamlessly with most light bar systems
• Injen Technology Limited Lifetime Warranty
• 2018-2023 Jeep Wrangler JL V6-3.6L Hybrid
• 2020-2023 Jeep Gladiator JT V6-3.6L
• 2018-2023 Jeep Wrangler JL V6-3.6L
• Made in Pomona California, USA

This Part Fits:

The Evolution of cold air intakes is here. The Evolution cold air intake system by Injen Technology is the next generation of performance intake systems. The EVO15070 snorkel is specifically engineered for use with our EVO5007 or EVO5008 Jeep Wrangler intake systems. The EVO15070 is a functioning snorkel that bolts directly to our intake box for a tough and rugged look. If you need to move the air inlet up for extremely dusty or high water situations, then this is the perfect addition to our intake system. Fully modular and interchangeable with our EVO15069 Ram Air scoop, the EVO15070 is the only snorkel unit that you can count on for your Jeep! Every EVO15070 Ram Air scoop is made in the USA from cross linked high density polyethylene for extreme durability. The installation process is simple and does not require aftermarket tuning for exceptional HORSEPOWER and TORQUE GAINS. The EVO15070 was precisely tuned and tested on our in-house dyno to replicate stock fueling while increasing horsepower and torque (when used with our EVO5007 or EVO5008 intake kits). This fully modular system was carefully designed utilizing the latest in CMM Laser Scanning hardware - SolidWorks 3D CAD Software ? and finally prototype tested after being printed on one of our state of the art 3D printers ? and this is all before ever being released for production! Our engineers were meticulous with every detail and that attention detail provides an unmatched fit and superior power numbers. Don't just take our word for it, every intake system that Injen Technology produces is 100% dyno tested in-house. The Evolution can't be stopped?.. IMPORTANT NOTICE; The EVO15070 Snorkel is an accessory that requires our EVO5007 and EVO5008 modular intake systems to function properly. The EVO5007 and EVO5008 were designed specifically for the 2007-2018 Jeep Wrangler JK's.

• Durable Roto-Molded Polyethylene housing with a stylish stainless steel mesh screen
• Must be used with Injen's EVO5007 or EVO5008 modular intake system
• Hood modification is required to complete the installation
• Aggressive intake growl under acceleration
• Injen Technology Limited Lifetime Warranty
• Install w/EVO5003 Intake System
• Made in Pomona, California USA

This Part Fits:

The Evolution of cold air intakes is here. The Evolution cold air intake system by Injen Technology is the next generation of performance intake systems. The EVO15069 Ram Air scoop is specifically engineered for use with our EVO5007 or EVO5008 Jeep Wrangler intake systems. The EVO15069 is a functioning ram air scoop that bolts directly to our intake box. If you need that extra bit of cool air for all-out performance, then this is the perfect addition to our intake system. Fully modular and interchangeable with our EVO15070 snorkel, the EVO15069 Ram Air scoop is the only ram air unit you can count on for your Jeep! Every EVO15069 Ram Air scoop is made in the USA from cross linked high density polyethylene for extreme durability. The installation process is simple and does not require aftermarket tuning for exceptional HORSEPOWER and TORQUE GAINS. The EVO15069 was precisely tuned and tested on our in-house dyno to replicate stock fueling while increasing horsepower and torque (when used with our EVO5007 or EVO5008 intake kits). This fully modular system was carefully designed utilizing the latest in CMM Laser Scanning hardware - SolidWorks 3D CAD Software ? and finally prototype tested after being printed on one of our state of the art 3D printers ? and this is all before ever being released for production! Our engineers were meticulous with every detail and that attention detail provides an unmatched fit and superior power numbers. Don't just take our word for it, every intake system that Injen Technology produces is 100% dyno tested in-house. The Evolution can't be stopped?.. IMPORTANT NOTICE; The EVO15069 Ram Air Scoop is an accessory that requires our EVO5007 and EVO5008 modular intake systems to function properly. The EVO5007 and EVO5008 were designed specifically for the 2007-2018 Jeep Wrangler JK's.

• Durable Roto-Molded Polyethylene housing with a stylish stainless steel mesh screen
• Must be used with Injen's EVO5007 or EVO5008 modual intake system
• Hood modifiaction is required to complete the installation
• Installs w/EVO5003 Intake System Sold Separately
• Aggressive intake growl under acceleration
• Injen Technology Limited Lifetime Warranty
• Made in Pomona, California USA

This Part Fits:

Boost up the performance of your 2017-2021 Honda Civic Type R (FK8) with Injen's all-new EVO1502 Evolution sealed cold air intake system. The EVO1502 cold air intake was designed using advanced engineering tools to offer a top quality kit that has no parallel. The EVO1502 one-piece sealed housing utilizes our patent pending Twist-Lock technology to securely fasten our SuperNano-Web Dry air filter in place. The housing also has a molded scoop to retain the factory inlet. This inlet helps direct cool, dense air into the intake system for maximum power! Injen has put it all on the table to give you the greatest intake system possible!, , Roto-molded Housing; The one-piece sealed housing utilizes the all-new Injen Twist-Lock System to securely attach the SuperNano-Web Dry air filter in place. The Twist-Lock system eliminates the use of unnecessary parts and gives you one of the simplest installations available. The EVO1502 housing also includes our Injen Clear-View badge for a cleaner, more aggressive under hood appearance. Roto-molded Intake Tube; The EVO1502 Evolution Cold Air Intake System uses a custom designed and dyno-tuned intake tube to produce huge power gains while retaining an OE quality fit. The intake tube also includes our patented tuning process that funnels air at a precise rate past the MAF sensor. This patented tuning process ensures accurate fuel trims and aggressive power gains without the fear of check engine lights. , ,

• This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Our clear inspection badge allows you to quickly check the condition of your air filter while the red stripe enhances underHood appearances.
• Twist-Lock Technology to securely integrate the air filter to the housing
• Aggressive underHood appearance while maintaining an OE fit
• Aggressive Under Hood Appearance While Maintaining OE Fit
• Dyno Proven gains of up to 13 hp and 18 lb-ft. of torque
• Injen Clear-View badge for simple air filter inspection
• Stainless steel band clamps with inner protective liner
• Fully serviceable Injen SuperNano-Web dry air filter
• Durable Roto-Molded Polyethylene tube and housing
• Reinforced automotive grade silicone couplers
• Replacement air filter part number X-1115-BB
• Designed to work with the stock calibration
• Aggressive intake growl under acceleration
• Injen Technology Limited Lifetime Warranty
• Made in Pomona, California USA

This Part Fits:

SuperNano-Web Dry Air Filter: The Injen SuperNano-Web Dry air filter is included with the EVO1501 cold air intake. This filter is uniquely designed to work with the Injen Twist-Lock System. Using our Twist-Lock technology has allowed our technicians to use the largest filter available for this application, which enhances the air volume - resulting in increased power gains while making this installation process quick and easy. , , Quality Hardware: From the Stainless Steel Band Clamps with an inner protective liner to the reinforced automotive grade silicone coupler, every aspect is covered for a perfect and reliable fit. , , Hassle-Free Installation: Keep it simple! Every Injen Evolution Cold Air intake that uses our Twist-Lock System has been strategically designed to utilize fewer parts and tools to provide the end user with one of the swiftest and most manageable installations available on the market today. Dyno Proven: Plain and simple, NUMBERS talk! Injen has a strong legacy of designing and thoroughly testing every product we develop and the EVO1501 clearly benefits from our dedication to performance. Our engineers put in countless hours of testing to prove that we have developed the safest, highest performing kit on the market. With 13 additional horsepower and 12 Ft.-lbs.of torque, Injen is proud to say that the EVO1501 Evolution Cold Air Intake system is the very best intake system for your Civic Si that money can buy.

• This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Our clear inspection badge allows you to quickly check the condition of your air filter while the red stripe enhances underHood appearances.
• Twist-Lock Technology to securely integrate the air filter to the housing
• Aggressive underHood appearance while maintaining an OE fit
• Aggressive Under Hood Appearance While Maintaining OE Fit
• Dyno Proven gains of up to 22 hp and 18 lb-ft. of torque
• Injen Clear-View badge for simple air filter inspection
• Stainless steel band clamps with inner protective liner
• Fully serviceable Injen SuperNano-Web dry air filter
• Durable Roto-Molded Polyethylene tube and housing
• Reinforced automotive grade silicone couplers
• Replacement air filter part number X-1110-BB
• Designed to work with the stock calibration
• Aggressive intake growl under acceleration
• Injen Technology Limited Lifetime Warranty
• Made in Pomona, California USA

This Part Fits:

SuperNano-Web Dry Air Filter: The SuperNano-Web Dry air filter that is included in the EVO1500. Has been uniquely designed to work with the Injen Twist-Lock System. Using our Twist-Lock technology has allowed our technicians to use the largest filter feasible for this application, which enhances the available air volume - resulting in added power while retaining an installation process that is quick and uncomplicated. , , Quality Hardware: From the Stainless Steel Band Clamps with an inner protective liner to the reinforced automotive grade silicone coupler, every aspect is covered for a perfect and reliable fit. , , Hassle-Free Installation: Keep it simple! The Injen Evolution Air intakes that use our Twist-Lock System have been strategically designed to utilize fewer parts to provide the end user with one of the swiftest and most manageable installations available on the market today. Dyno Proven: Clean and simple, NUMBERS talk! Well, Injen has put in the time and perseverance to stand behind our performance data. We put in countless hours of testing to prove that we have developed a top-notch kit. With all those hours of designing and dyno testing, Injen is proud to say that the EVO1500 Evolution Air Intake system puts down numbers of up to 13 additional horsepower and 12 Ft.-lbs. of torque.

• Our clear inspection badge allows you to quickly check the condition of your air filter while the red stripe enhances underHood appearances.
• Twist-Lock Technology to securely integrate the air filter to the housing
• Aggressive underHood appearance while maintaining an OE fit
• Aggressive Under Hood Appearance While Maintaining OE Fit
• Dyno Proven gains of up to 13 hp and 12 lb-ft. of torque
• Injen Clear-View badge for simple air filter inspection
• Stainless steel band clamps with inner protective liner
• Fully serviceable Injen SuperNano-Web dry air filter
• Durable Roto-Molded Polyethylene tube and housing
• Reinforced automotive grade silicone couplers
• Replacement air filter part number X-1110-BB
• Designed to work with the stock calibration
• Aggressive intake growl under acceleration
• Injen Technology Limited Lifetime Warranty
• Made in Pomona, California USA

This Part Fits:

SuperNano-Web Dry Air Filter: 'That's massive!' is all you will hear about this SuperNano-Web Dry air filter that is included with the EVO1301 cold air intake system. This filter has been uniquely designed to work with the Injen Twist-Lock System. Using our Twist-Lock technology has allowed our engineers to use the largest filter possible for this application, which increases the available air volume, resulting in added power while keeping the installation process quick and simple.

• Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Intake scoop integration is designed to capture the largest amount of cool air for max performance
• Replacement air filter part number X-1108-BB (Dry) or X-1108-BR (Oiled Cotton)
• Simple drop-in installation can normally be completed within 20 minutes
• Air Filter attaches to the airbox using our patented TwistLok method
• Box seamlessly adapts to the OE inlet scoop without modification
• Fully serviceable 4.00" I.D. Injen SuperNano-Web dry air filter
• Manufactured from high-strength XLPE Roto-Molded Polyethylene
• Aggressive under hood appearance while maintaining an OE fit
• Dyno Proven gains of up to 10 hp and 9 lb-ft. of torque
• Stainless steel band clamps with inner protective liner
• Reinforced automotive grade silicone couplers
• Designed to work with the stock calibration
• Aggressive intake growl under acceleration
• Injen Technology Limited Lifetime Warranty
• Made in Pomona California, USA

This Part Fits:

Roto-molded Housing and Ram Air Scoop: The EVO1206 system features our 2-piece box design that incorporates our boost plenum. The box attaches to our fully incorporated ram air scoop to capture the maximum amount of cool air to feed that hungry turbo. , , 6061 Aluminum Intake Tube: The EVO1206 Evolution Air Intake System uses a custom designed and dyno-tuned, aluminum intake tube that utilizes our patented air fusion and MR technology to produce huge power gains while retaining an OE quality fit and safe fuel trim levels. SuperNano-Web Dry Air Filter: "That's massive!"is all you will hear about this SuperNano-Web Dry air filter that is included with the EVO1206 cold air intake system. This filter has been uniquely designed to work with the downward facing orientation to ensure a leak-proof seal. Using the largest filter possible for this application has increased the available air volume - resulting in added power while keeping the installation process quick and simple. , , Quality Hardware: From the Stainless Steel Band Clamps with an inner protective liner to the reinforced automotive grade silicone coupler, every aspect is covered for a perfect and secure fit. , , Hassle-Free Installation: Make it easy! By designing this kit in a 3D workspace, you're ensured a quick and easy installation that not only increases the power output of your engine, but also provides a clean and powerful look that others see every time you pop your hood. Dyno Proven: Clean and simple, NUMBERS talk! Injen has put in the time and diligence to stand behind our performance data. We put in the time to test and prove that we have developed a superior kit for your Subaru. After hours of designing and dyno teWRX STIng, Injen is proud to say that the EVO1206 Evolution Air Intake system puts down numbers of up to 26 additional horsepower and 34 Ft.-lbs. of torque.

• This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Intake scoop is designed to capture the largest amount of cool air
• Aggressive underHood appearance while maintaining an OE fit
• Dyno Proven gains of up to 26 hp and 34 lb-ft. of torque
• Stainless steel band clamps with inner protective liner
• Fully serviceable Injen SuperNano-Web dry air filter
• Durable Roto-Molded Polyethylene housing and scoop
• Reinforced automotive grade silicone couplers
• Designed to work with the stock calibration
• Aggressive intake growl under acceleration
• Injen Technology Limited Lifetime Warranty
• Optional hydroshield part number 1076BLK
• Increased Torque Up To 34 ft./lbs.
• Replacement air filter # X-1070-BB
• Made in Pomona, California USA

This Part Fits:

Roto-molded Housing: The one-piece sealed housing utilizes the all-new Injen Twist-Lock System to securely attach the SuperNano-Web Dry air filter in place which eliminates the use of unnecessary parts and provides one of the simplest installations available. The EVO1200 housing also sports the all-new Injen Clear-View badge for a cleaner more aggressive under hood appearance. Front Mounted Ram Air Scoop: SuperNano-Web Dry Air Filter: "OMG that's massive!"is all you will hear about this SuperNano-Web Dry air filter that is included in the EVO1200. This filter has been uniquely designed to work with the Injen Twist-Lock System. Using our Twist-Lock system has allowed our engineers to use the largest filter possible for this application, which increases the available air volume - resulting in added power while keeping the installation process quick and simple. Quality Hardware: Stainless steel Band Clamps with an inner protective liner to the reinforced automotive grade silicone coupler, every aspect is covered for a perfect and secure fit and easy installation. Hassle-Free Installation: Make it easy! The Injen Evolution Air intakes that use our Twist-Lock System have been strategically designed to use fewer parts to provide the end user with one of the quickest and simplest installations available on the market today.Dyno Proven: Clean and simple, NUMBERS talk! Injen has put in the time and diligence to stand behind our performance data. We put in the time to test and prove that we have developed a top-notch kit. After hours of designing and dyno testing, Injen is proud to say that the EVO1200 Evolution Air Intake system puts down numbers of up to 7 additional horsepower and 8 lb-ft. of torque.

• This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Patented Twist-Lock Air Filter used to securely integrate the air filter to the housing
• Injen Clear-Vue Window allows you to check the condition of your air filter easily
• Ram air scoop is designed to capture the largest amount of cool air
• Aggressive under hood appearance while maintaining an OE fit
• Stainless steel band clamps with inner protective liner
• Dyno Proven gains of up to 7 hp and 8 lb-ft. of torque
• Fully serviceable Injen SuperNano-Web dry air filter
• Durable Roto-Molded Polyethylene construction
• Reinforced automotive grade silicone couplers
• Replacement air filter part number X-1112-BB
• Designed to work with the stock calibration
• Aggressive intake growl under acceleration
• Injen Technology Limited Lifetime Warranty
• Made in Pomona, California, USA

This Part Fits:

You finally have your 2020-2025 BMW G20 3-Series equipped with the Turbo B58 and Turbo Hybrid B58 engine and now the next logical step in your search for power gains is with Injen Technology. The EVO1108 is specifically designed for a drop-in fit in your BMW, including the seamless fitment into the factory air scoop. This easy to install performance cold air intake system allows that hungry Turbo engine to breathe deeper and unleash that additional performance that you've been craving. It truly is a win on all levels.

• Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Intake scoop integration is designed to capture the largest amount of cool air for max performance
• Simple drop-in installation can normally be completed within 20 minutes
• Air Filter attaches to the airbox using our patented TwistLock method
• Box seamlessly adapts to the OE inlet scoop without modification
• Fully serviceable 5.00" I.D. Injen SuperNano-Web dry air filter
• Manufactured from high-strength XLPE Roto-Molded Polyethylene
• Dynamic under hood appearance while maintaining an OE fit
• Dyno Proven gains of up to 13 hp and 11 lb-ft. of torque
• Reinforced automotive grade silicone couplers
• Replacement air filter part number X-1093-BB
• Designed to work with the stock calibration
• Aggressive intake growl under acceleration
• Injen Technology Limited Lifetime Warranty
• Made in Pomona California, USA

This Part Fits:

SuperNano-Web Dry Air Filter: "That's massive!" is all you will hear about this SuperNano-Web Dry air filter that is included with the EVO1107 cold air intake system. This filter has been uniquely designed to work with the Injen Twist-Lock System. Using our Twist-Lock technology has allowed our engineers to use the largest filter possible for this application, which increases the available air volume, resulting in added power while keeping the installation process quick and simple.

• NOTE: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Intake scoop integration is designed to capture the largest amount of cool air for max performance
• Replacement air filter part number X-1134-BB (Dry) or X-1134-BR (Oiled Cotton)
• Can be used with our PT0008 Throttle Response controller for improved response
• Simple drop-in installation can normally be completed within 20 minutes
• Air Filter attaches to the airbox using our patented TwistLok method
• Box seamlessly adapts to the OE inlet scoop without modification
• Manufactured from high-strength XLPE Roto-Molded Polyethylene
• Aggressive under hood appearance while maintaining an OE fit
• Dyno Proven gains of up to 21 hp and 18 lb-ft. of torque
• Stainless steel band clamps with inner protective liner
• Fully serviceable Injen SuperNano-Web dry air filter
• Reinforced automotive grade silicone couplers
• Designed to work with the stock calibration
• Injen Technology Limited Lifetime Warranty
• Aggressive intake growl under acceleration
• Does NOT fit the 2013 M135i E82 chassis.
• Made in Pomona California, USA

This Part Fits:

Take the ultimate driving experience of your 2001-2006 BMW M3 (E46) with the L6-3.2L engine to the next level of excitement with Injen's EVO1106 Evolution cold air intake system. The Injen EVO1106 has the cleanest installation on the market that seamless adapts to the OE scoop. Add to that the highest dyno-proven gains at a price point that makes sense ? the EVO1106 is a win on all levels. , , The Injen EVO1106 cold air intake system for the E46 M3 is truly on the next level. From the one-piece sealed housing that utilizes our patent pending Twist-Lock technology to securely attach a massive SuperNano-Web Dry air filter in place, to the seamless fitment to the OE inlet scoop, all the way down to premium hardware, Injen has put it all on the board to provide you, the consumer, the best intake possible for your BMW E46 M3!, , Roto-molded Housing; The one-piece sealed housing utilizes the all-new Injen Twist-Lock System to securely attach the SuperNano-Web Dry air filter in place which eliminates the use of unnecessary parts and provides one of the simplest installations available. The EVO1106 housing also sports the all-new Injen Clear-View badge for a cleaner more aggressive under hood appearance. Roto-molded Intake Tube; The EVO1106 Evolution Air Intake System uses a custom designed and dyno-tuned, intake tube to produce huge power gains while retaining an OE quality fit., ,

• This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Intake scoop integration is designed to capture the largest amount of cool air for max performance
• Can be used with our PT0008 Throttle Response controller for improved response
• Simple drop-in installation can normally be completed within 20 minutes
• Box seamlessly adapts to the OE inlet scoop without modification
• Durable Roto-Molded XLPE Polyethylene housing and intake tube
• Aggressive underHood appearance while maintaining an OE fit
• Dyno Proven gains of up to 14 hp and 10 lb-ft. of torque
• Stainless steel band clamps with inner protective liner
• Fully serviceable Injen SuperNano-Web dry air filter
• Reinforced automotive grade silicone couplers
• Replacement air filter part number X-1107-BB
• Designed to work with the stock calibration
• Stainless Steel Hardware/Clamps And Screws
• Aggressive intake growl under acceleration
• Injen Technology Limited Lifetime Warranty
• Optional hydroshield part number 1119BLK
• Made in Pomona, California USA

This Part Fits:

SuperNano-Web Dry Air Filter; "That's massive!"is all you will hear about this SuperNano-Web Dry air filter that is included with the EVO1105 cold air intake system. This filter has been uniquely designed to work with the Injen Twist-Lock System. Using our Twist-Lock technology has allowed our engineers to use the largest filter possible for this application, which increases the available air volume - resulting in added power while keeping the installation process quick and simple. Quality Hardware; From the Stainless Steel Band Clamps with an inner protective liner to the reinforced automotive grade silicone coupler, every aspect is covered for a perfect and secure fit. Hassle-Free Installation; Make it easy! The Injen Evolution Air intakes that use our Twist-Lock System have been strategically designed to use fewer parts to provide the end user with one of the quickest and simplest installations available on the market today. Dyno Proven; Clean and simple, NUMBERS talk! Injen has put in the time and diligence to stand behind our performance data. We put in the time to test and prove that we have developed a superior kit for your BMW. So after hours of designing and dyno testing, Injen is proud to say that the EVO1105 Evolution Air Intake system puts down numbers of up to 13 additional horsepower and 18 lb-Ft. of torque.

• This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Our clear inspection badge allows you to quickly check the condition of your air filter while the red stripe enhances under hood appearances.
• Aggressive under hood appearance while maintaining an OE fit
• Aggressive Under Hood Appearance While Maintaining OE Fit
• Dyno Proven gains of up to 13 hp and 18 lb-ft. of torque
• Stainless steel band clamps with inner protective liner
• Fully serviceable Injen SuperNano-Web dry air filter
• Durable Roto-Molded Polyethylene tube and housing
• Reinforced automotive grade silicone couplers
• Designed to work with the stock calibration
• Aggressive intake growl under acceleration
• Injen Technology Limited Lifetime Warranty
• Replacement air filter # X-1112-BB
• Made in Pomona California, USA

This Part Fits:

SuperNano-Web Dry Air Filter: "That's massive!"is all you will hear about this SuperNano-Web Dry air filter that is included with the EVO1104 cold air intake system. This filter has been uniquely designed to work with the Injen Twist-Lock System. Using our Twist-Lock technology has allowed our engineers to use the largest filter possible for this application, which increases the available air volume - resulting in added power while keeping the installation process quick and simple. Quality Hardware: From the Stainless Steel Band Clamps with an inner protective liner to the reinforced automotive grade silicone coupler, every aspect is covered for a perfect and secure fit. Hassle-Free Installation: Make it easy! The Injen Evolution Air intakes that use our Twist-Lock System have been strategically designed to use fewer parts to provide the end user with one of the quickest and simplest installations available on the market today. Dyno Proven: Clean and simple, NUMBERS talk! Injen has put in the time and diligence to stand behind our performance data. We put in the time to test and prove that we have developed a superior kit for your BMW. So after hours of designing and dyno testing, Injen is proud to say that the EVO1104 Evolution Air Intake system puts down numbers of up to 7 additional horsepower and 7 Ft.-lbs. of torque.

• This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Our clear inspection badge allows you to quickly check the condition of your air filter while the red stripe enhances underHood appearances.
• Aggressive underHood appearance while maintaining an OE fit
• Aggressive Under Hood Appearance While Maintaining OE Fit
• Stainless steel band clamps with inner protective liner
• Dyno Proven gains of up to 7 hp and 7 lb-ft. of torque
• Fully serviceable Injen SuperNano-Web dry air filter
• Durable Roto-Molded Polyethylene tube and housing
• Reinforced automotive grade silicone couplers
• Designed to work with the stock calibration
• Aggressive intake growl under acceleration
• Injen Technology Limited Lifetime Warranty
• Replacement air filter # X-1112-BB
• Made in Pomona, California USA

This Part Fits: