Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Welcome to Atlus Automotive
Main menu
-
Performance
- Performance
-
Intake & Exhaust
- Intake & Exhaust
- Air Intake Systems
- Cold Air Intakes
- Air Intake Components
- Air Filters
- Air Filters - Drop In
- Air Filters - Direct Fit
- Air Filters - Universal Fit
- Pre-Filters
- Recharge Kits
- OE Replacement Air Intake Components
- Exhaust, Mufflers & Tips
- Catback
- Axle Back
- Muffler
- Tips
- Headers & Manifolds
- Connecting Pipes
- Catalytic Converter Direct Fit
- Catalytic Converter Universal
- Exhaust Collector
- Merge Collectors
-
Engine Upgrades
- Engine Upgrades
- Engine Components
- Camshafts
- Valve Springs, Retainers
- Head Gaskets
- Head Stud & Bolt Kits
- Main Stud & Bolt Kits
- Gasket Kits
- Engine Mounts
- Oil Catch Cans
- Oil Separators
- Throttle Bodies
- Throttle Body Spacers
- Crankshaft Dampers
- Valves
- Piston Rings
- Piston Sets - Forged - 4cyl
- Piston Sets - Cast - 4cyl
- Connecting Rods - 4Cyl
- Rotating Assemblies
- Stroker Kits
-
Turbo & Cooling
-
Fuel, Ignition & Tuning
-
Suspension & Handling
- Suspension & Handling
-
Lowering & Coilovers
-
Arms, Links & Alignment
-
Lift & Off-Road Suspension
-
Chassis & Bracing
-
Wheels & Tires
- Wheels & Tires
-
Wheels
-
Tires
-
Drivetrain & Clutch
-
Brakes
- Brakes
-
Pads & Rotors
-
Brake Kits & Calipers
-
Lines, Fluid & Hardware
-
Exterior & Lighting
- Exterior & Lighting
-
Lighting
-
Exterior Styling
-
Bumpers & Protection
-
Interior & Electronics
- Interior & Electronics
-
Interior Upgrades
-
Gauges & Electronics
-
Audio & Safety
-
Overland & Utility
- Overland & Utility
-
Bed Covers & Bed Gear
-
Steps, Racks & Storage
-
Trail & Towing
-
Maintenance & Garage
- Maintenance & Garage
-
Oil, Fluids & Filters
-
Detailing & Car Care
-
Tools & Fabrication
Your cart
Choose your Location
-
Atlus
1340 Cobb Dr, Unit 1, Eustis, FL 32736
352-234-4458
Mon – Fri: 8:30 am – 4:30 pm
Sat: 9:00 am – 2:00 pm
Sun: Closed
Product Comparison
How they are Different
|
__ __ |
|
|---|---|
| Description |
Description - __ |
| Rating |
Rating - __ |
| Vendor |
Vendor - __ |
| Color |
Color - __ |
|
|
Compare products ( / )
914 products
914 products
Sort by:
- Featured
- Most relevant
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
$76.49
Stop damage before it starts with the lowest profile design on the market. The Husky Aeroskin(R) Hood Protector gives you a skin-tight fit to the contours of your hood with no-quit protection against chips, rocks, bugs, and anything the road kicks up. Plus, that sleek, aerodynamic custom touch that'll turn heads. Installation is a snap---no drilling and no special hardware required. Mounts in minutes with 3M(TM) automotive-grade adhesive, protects for life. Available in smoke and chrome and proudly made in the USA with global materials.
Installation Instructions- Husky Aeroskin(R) gives you the lowest profile protection available today for that sleek, better-than-factory custom look.
- Husky Aeroskin[R] Gives You The Lowest Profile Protection Available Today For That Sleek/Better-Than-Factory Custom Look
- Custom-molded for a skin-tight fit that matches the contours of your hood. Adds a sleek, custom look to your ride.
- Custom-Molded For A Skin-Tight Fit That Matches The Contours Of Your Hood/Adds A Sleek/Custom Look To Your Ride
- The Husky Aeroskin(R) is constructed with nail-tough acrylic for unstoppable protection your can count on.
- The Husky Aeroskin[R] Is Constructed With Nail-Tough Acrylic For Unstoppable Protection Your Can Count On
- Available in dark smoke finish for a perfect complement to virtually any vehicle.
- Available In Dark Smoke Finish For A Perfect Complement To Virtually Any Vehicle
- Mounts in minutes with 3M(TM) automotive-grade adhesive tape (included).
- Mounts In Minutes With 3M[TM] Automotive-Grade Adhesive Tape [Included]
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2014-2020 | Nissan | Rogue | S |
| 2014-2020 | Nissan | Rogue | SL |
| 2017-2019 | Nissan | Rogue | SL Hybrid |
| 2014-2020 | Nissan | Rogue | SV |
| 2017-2019 | Nissan | Rogue | SV Hybrid |
$84.99
Stop damage before it starts with the lowest profile design on the market. The Husky Aeroskin(R) Hood Protector gives you a skin-tight fit to the contours of your hood with no-quit protection against chips, rocks, bugs, and anything the road kicks up. Plus, that sleek, aerodynamic custom touch that'll turn heads. Installation is a snap---no drilling and no special hardware required. Mounts in minutes with 3M(TM) automotive-grade adhesive, protects for life. Available in smoke and chrome and proudly made in the USA with global materials.
Installation Instructions- Husky Aeroskin(R) gives you the lowest profile protection available today for that sleek, better-than-factory custom look.
- Husky Aeroskin[R] Gives You The Lowest Profile Protection Available Today For That Sleek/Better-Than-Factory Custom Look
- Custom-molded for a skin-tight fit that matches the contours of your hood. Adds a sleek, custom look to your ride.
- Custom-Molded For A Skin-Tight Fit That Matches The Contours Of Your Hood/Adds A Sleek/Custom Look To Your Ride
- The Husky Aeroskin(R) is constructed with nail-tough acrylic for unstoppable protection your can count on.
- The Husky Aeroskin[R] Is Constructed With Nail-Tough Acrylic For Unstoppable Protection Your Can Count On
- Available in dark smoke finish for a perfect complement to virtually any vehicle.
- Available In Dark Smoke Finish For A Perfect Complement To Virtually Any Vehicle
- Mounts in minutes with 3M(TM) automotive-grade adhesive tape (included).
- Mounts In Minutes With 3M[TM] Automotive-Grade Adhesive Tape [Included]
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2024 | Nissan | TITAN | Platinum Reserve |
| 2017-2024 | Nissan | TITAN | PRO-4X |
| 2017-2023 | Nissan | TITAN | S |
| 2017-2021 | Nissan | TITAN | SL |
| 2017-2024 | Nissan | TITAN | SV |
$67.99
Stop damage before it starts with the lowest profile design on the market. The Husky Aeroskin(R) Hood Protector gives you a skin-tight fit to the contours of your hood with no-quit protection against chips, rocks, bugs, and anything the road kicks up. Plus, that sleek, aerodynamic custom touch that'll turn heads. Installation is a snap---no drilling and no special hardware required. Mounts in minutes with 3M(TM) automotive-grade adhesive, protects for life. Available in smoke and chrome and proudly made in the USA with global materials.
Installation Instructions- Husky Aeroskin(R) gives you the lowest profile protection available today for that sleek, better-than-factory custom look.
- Husky Aeroskin[R] Gives You The Lowest Profile Protection Available Today For That Sleek/Better-Than-Factory Custom Look
- Custom-molded for a skin-tight fit that matches the contours of your hood. Adds a sleek, custom look to your ride.
- Custom-Molded For A Skin-Tight Fit That Matches The Contours Of Your Hood/Adds A Sleek/Custom Look To Your Ride
- The Husky Aeroskin(R) is constructed with nail-tough acrylic for unstoppable protection your can count on.
- The Husky Aeroskin[R] Is Constructed With Nail-Tough Acrylic For Unstoppable Protection Your Can Count On
- Available in dark smoke finish for a perfect complement to virtually any vehicle.
- Available In Dark Smoke Finish For A Perfect Complement To Virtually Any Vehicle
- Mounts in minutes with 3M(TM) automotive-grade adhesive tape (included).
- Mounts In Minutes With 3M[TM] Automotive-Grade Adhesive Tape [Included]
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2016 | Dodge | Challenger | 392 Hemi Scat Pack Shaker |
| 2017-2023 | Dodge | Challenger | GT |
| 2009-2023 | Dodge | Challenger | R/T |
| 2017-2019 | Dodge | Challenger | R/T 392 |
| 2012 | Dodge | Challenger | R/T Classic |
| 2015-2016 | Dodge | Challenger | R/T Plus |
| 2016 | Dodge | Challenger | R/T Plus Shaker |
| 2016-2023 | Dodge | Challenger | R/T Scat Pack |
| 2021 | Dodge | Challenger | R/T Scat Pack Shaker Widebody |
| 2019-2023 | Dodge | Challenger | R/T Scat Pack Widebody |
| 2016 | Dodge | Challenger | R/T Shaker |
| 2014 | Dodge | Challenger | Rallye Redline |
| 2015 | Dodge | Challenger | Scat Pack |
| 2009-2011 | Dodge | Challenger | SE |
| 2015-2018 | Dodge | Challenger | SRT 392 |
| 2018 | Dodge | Challenger | SRT Demon |
| 2023 | Dodge | Challenger | SRT Demon 170 |
| 2015-2022 | Dodge | Challenger | SRT Hellcat |
| 2023 | Dodge | Challenger | SRT Hellcat Jailbreak |
| 2019-2022 | Dodge | Challenger | SRT Hellcat Redeye |
| 2023 | Dodge | Challenger | SRT Hellcat Redeye Jailbreak |
| 2019-2022 | Dodge | Challenger | SRT Hellcat Redeye Widebody |
| 2023 | Dodge | Challenger | SRT Hellcat Redeye Widebody Jailbreak |
| 2018-2022 | Dodge | Challenger | SRT Hellcat Widebody |
| 2023 | Dodge | Challenger | SRT Hellcat Widebody Jailbreak |
| 2022 | Dodge | Challenger | SRT Jailbreak |
| 2020-2023 | Dodge | Challenger | SRT Super Stock |
| 2008-2014 | Dodge | Challenger | SRT8 |
| 2012-2023 | Dodge | Challenger | SXT |
| 2012,2015-2018 | Dodge | Challenger | SXT Plus |
| 2017-2018 | Dodge | Challenger | T/A |
| 2017-2018 | Dodge | Challenger | T/A 392 |
| 2021 | Dodge | Challenger | T/A 392 Widebody |
$67.99
Stop damage before it starts with the lowest profile design on the market. The Husky Aeroskin(R) Hood Protector gives you a skin-tight fit to the contours of your hood with no-quit protection against chips, rocks, bugs, and anything the road kicks up. Plus, that sleek, aerodynamic custom touch that'll turn heads. Installation is a snap---no drilling and no special hardware required. Mounts in minutes with 3M(TM) automotive-grade adhesive, protects for life. Available in smoke and chrome and proudly made in the USA with global materials.
Installation Instructions- Husky Aeroskin(R) gives you the lowest profile protection available today for that sleek, better-than-factory custom look.
- Husky Aeroskin[R] Gives You The Lowest Profile Protection Available Today For That Sleek/Better-Than-Factory Custom Look
- Custom-molded for a skin-tight fit that matches the contours of your hood. Adds a sleek, custom look to your ride.
- Custom-Molded For A Skin-Tight Fit That Matches The Contours Of Your Hood/Adds A Sleek/Custom Look To Your Ride
- The Husky Aeroskin(R) is constructed with nail-tough acrylic for unstoppable protection your can count on.
- The Husky Aeroskin[R] Is Constructed With Nail-Tough Acrylic For Unstoppable Protection Your Can Count On
- Available in dark smoke finish for a perfect complement to virtually any vehicle.
- Available In Dark Smoke Finish For A Perfect Complement To Virtually Any Vehicle
- Mounts in minutes with 3M(TM) automotive-grade adhesive tape (included).
- Mounts In Minutes With 3M[TM] Automotive-Grade Adhesive Tape [Included]
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2022 | Chevrolet | Trax | LS |
| 2017-2022 | Chevrolet | Trax | LT |
| 2017-2020 | Chevrolet | Trax | Premier |
$84.99
Stop damage before it starts with the lowest profile design on the market. The Husky Aeroskin(R) Hood Protector gives you a skin-tight fit to the contours of your hood with no-quit protection against chips, rocks, bugs, and anything the road kicks up. Plus, that sleek, aerodynamic custom touch that'll turn heads. Installation is a snap---no drilling and no special hardware required. Mounts in minutes with 3M(TM) automotive-grade adhesive, protects for life. Available in smoke and chrome and proudly made in the USA with global materials.
Installation Instructions- Husky Aeroskin(R) gives you the lowest profile protection available today for that sleek, better-than-factory custom look.
- Husky Aeroskin[R] Gives You The Lowest Profile Protection Available Today For That Sleek/Better-Than-Factory Custom Look
- Custom-molded for a skin-tight fit that matches the contours of your hood. Adds a sleek, custom look to your ride.
- Custom-Molded For A Skin-Tight Fit That Matches The Contours Of Your Hood/Adds A Sleek/Custom Look To Your Ride
- The Husky Aeroskin(R) is constructed with nail-tough acrylic for unstoppable protection your can count on.
- The Husky Aeroskin[R] Is Constructed With Nail-Tough Acrylic For Unstoppable Protection Your Can Count On
- Available in dark smoke finish for a perfect complement to virtually any vehicle.
- Available In Dark Smoke Finish For A Perfect Complement To Virtually Any Vehicle
- Mounts in minutes with 3M(TM) automotive-grade adhesive tape (included).
- Mounts In Minutes With 3M[TM] Automotive-Grade Adhesive Tape [Included]
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2022 | Ford | F-250 Super Duty | King Ranch |
| 2017-2022 | Ford | F-250 Super Duty | Lariat |
| 2018-2022 | Ford | F-250 Super Duty | Limited |
| 2017-2022 | Ford | F-250 Super Duty | Platinum |
| 2017-2022 | Ford | F-250 Super Duty | XL |
| 2017-2022 | Ford | F-250 Super Duty | XLT |
| 2017-2022 | Ford | F-350 Super Duty | King Ranch |
| 2017-2022 | Ford | F-350 Super Duty | Lariat |
| 2018-2022 | Ford | F-350 Super Duty | Limited |
| 2017-2022 | Ford | F-350 Super Duty | Platinum |
| 2017-2022 | Ford | F-350 Super Duty | XL |
| 2017-2022 | Ford | F-350 Super Duty | XLT |
$67.99
Stop damage before it starts with the lowest profile design on the market. The Husky Aeroskin(R) Hood Protector gives you a skin-tight fit to the contours of your hood with no-quit protection against chips, rocks, bugs, and anything the road kicks up. Plus, that sleek, aerodynamic custom touch that'll turn heads. Installation is a snap---no drilling and no special hardware required. Mounts in minutes with 3M(TM) automotive-grade adhesive, protects for life. Available in smoke and chrome and proudly made in the USA with global materials.
Installation Instructions- Husky Aeroskin(R) gives you the lowest profile protection available today for that sleek, better-than-factory custom look.
- Husky Aeroskin[R] Gives You The Lowest Profile Protection Available Today For That Sleek/Better-Than-Factory Custom Look
- Custom-molded for a skin-tight fit that matches the contours of your hood. Adds a sleek, custom look to your ride.
- Custom-Molded For A Skin-Tight Fit That Matches The Contours Of Your Hood/Adds A Sleek/Custom Look To Your Ride
- The Husky Aeroskin(R) is constructed with nail-tough acrylic for unstoppable protection your can count on.
- The Husky Aeroskin[R] Is Constructed With Nail-Tough Acrylic For Unstoppable Protection Your Can Count On
- Available in dark smoke finish for a perfect complement to virtually any vehicle.
- Available In Dark Smoke Finish For A Perfect Complement To Virtually Any Vehicle
- Mounts in minutes with 3M(TM) automotive-grade adhesive tape (included).
- Mounts In Minutes With 3M[TM] Automotive-Grade Adhesive Tape [Included]
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2019 | Cadillac | XT5 | Base |
| 2021-2025 | Cadillac | XT5 | Livery |
| 2017-2026 | Cadillac | XT5 | Luxury |
| 2017-2019 | Cadillac | XT5 | Platinum |
| 2017-2026 | Cadillac | XT5 | Premium Luxury |
| 2020-2026 | Cadillac | XT5 | Sport |
$67.99
Stop damage before it starts with the lowest profile design on the market. The Husky Aeroskin(R) Hood Protector gives you a skin-tight fit to the contours of your hood with no-quit protection against chips, rocks, bugs, and anything the road kicks up. Plus, that sleek, aerodynamic custom touch that'll turn heads. Installation is a snap---no drilling and no special hardware required. Mounts in minutes with 3M(TM) automotive-grade adhesive, protects for life. Available in smoke and chrome and proudly made in the USA with global materials.
Installation Instructions- Husky Aeroskin(R) gives you the lowest profile protection available today for that sleek, better-than-factory custom look.
- Husky Aeroskin[R] Gives You The Lowest Profile Protection Available Today For That Sleek/Better-Than-Factory Custom Look
- Custom-molded for a skin-tight fit that matches the contours of your hood. Adds a sleek, custom look to your ride.
- Custom-Molded For A Skin-Tight Fit That Matches The Contours Of Your Hood/Adds A Sleek/Custom Look To Your Ride
- The Husky Aeroskin(R) is constructed with nail-tough acrylic for unstoppable protection your can count on.
- The Husky Aeroskin[R] Is Constructed With Nail-Tough Acrylic For Unstoppable Protection Your Can Count On
- Available in dark smoke finish for a perfect complement to virtually any vehicle.
- Available In Dark Smoke Finish For A Perfect Complement To Virtually Any Vehicle
- Mounts in minutes with 3M(TM) automotive-grade adhesive tape (included).
- Mounts In Minutes With 3M[TM] Automotive-Grade Adhesive Tape [Included]
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2019-2021 | Honda | Passport | Elite |
| 2019-2021 | Honda | Passport | EX-L |
| 2019-2021 | Honda | Passport | Sport |
| 2019-2021 | Honda | Passport | Touring |
| 2020-2022 | Honda | Pilot | Black Edition |
| 2016-2022 | Honda | Pilot | Elite |
| 2016-2021 | Honda | Pilot | EX |
| 2016-2022 | Honda | Pilot | EX-L |
| 2016-2021 | Honda | Pilot | LX |
| 2021-2022 | Honda | Pilot | Special Edition |
| 2022 | Honda | Pilot | Sport |
| 2016-2022 | Honda | Pilot | Touring |
| 2022 | Honda | Pilot | TrailSport |
| 2017-2020 | Honda | Ridgeline | Black Edition |
| 2017-2019 | Honda | Ridgeline | RT |
| 2017-2020 | Honda | Ridgeline | RTL |
| 2017-2020 | Honda | Ridgeline | RTL-E |
| 2017-2019 | Honda | Ridgeline | RTL-T |
| 2017 | Honda | Ridgeline | RTS |
| 2017-2020 | Honda | Ridgeline | Sport |
$84.99
Stop damage before it starts with the lowest profile design on the market. The Husky Aeroskin(R) Hood Protector gives you a skin-tight fit to the contours of your hood with no-quit protection against chips, rocks, bugs, and anything the road kicks up. Plus, that sleek, aerodynamic custom touch that'll turn heads. Installation is a snap---no drilling and no special hardware required. Mounts in minutes with 3M(TM) automotive-grade adhesive, protects for life. Available in smoke and chrome and proudly made in the USA with global materials.
Installation Instructions- Husky Aeroskin(R) gives you the lowest profile protection available today for that sleek, better-than-factory custom look.
- Husky Aeroskin[R] Gives You The Lowest Profile Protection Available Today For That Sleek/Better-Than-Factory Custom Look
- Custom-molded for a skin-tight fit that matches the contours of your hood. Adds a sleek, custom look to your ride.
- Custom-Molded For A Skin-Tight Fit That Matches The Contours Of Your Hood/Adds A Sleek/Custom Look To Your Ride
- The Husky Aeroskin(R) is constructed with nail-tough acrylic for unstoppable protection your can count on.
- The Husky Aeroskin[R] Is Constructed With Nail-Tough Acrylic For Unstoppable Protection Your Can Count On
- Available in dark smoke finish for a perfect complement to virtually any vehicle.
- Available In Dark Smoke Finish For A Perfect Complement To Virtually Any Vehicle
- Mounts in minutes with 3M(TM) automotive-grade adhesive tape (included).
- Mounts In Minutes With 3M[TM] Automotive-Grade Adhesive Tape [Included]
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2020 | Ford | F-150 | Raptor |
$76.49
Stop damage before it starts with the lowest profile design on the market. The Husky Aeroskin(R) Hood Protector gives you a skin-tight fit to the contours of your hood with no-quit protection against chips, rocks, bugs, and anything the road kicks up. Plus, that sleek, aerodynamic custom touch that'll turn heads. Installation is a snap---no drilling and no special hardware required. Mounts in minutes with 3M(TM) automotive-grade adhesive, protects for life. Available in smoke and chrome and proudly made in the USA with global materials.
Installation Instructions- Husky Aeroskin(R) gives you the lowest profile protection available today for that sleek, better-than-factory custom look.
- Husky Aeroskin[R] Gives You The Lowest Profile Protection Available Today For That Sleek/Better-Than-Factory Custom Look
- Custom-molded for a skin-tight fit that matches the contours of your hood. Adds a sleek, custom look to your ride.
- Custom-Molded For A Skin-Tight Fit That Matches The Contours Of Your Hood/Adds A Sleek/Custom Look To Your Ride
- The Husky Aeroskin(R) is constructed with nail-tough acrylic for unstoppable protection your can count on.
- The Husky Aeroskin[R] Is Constructed With Nail-Tough Acrylic For Unstoppable Protection Your Can Count On
- Available in dark smoke finish for a perfect complement to virtually any vehicle.
- Available In Dark Smoke Finish For A Perfect Complement To Virtually Any Vehicle
- Mounts in minutes with 3M(TM) automotive-grade adhesive tape (included).
- Mounts In Minutes With 3M[TM] Automotive-Grade Adhesive Tape [Included]
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2019 | GMC | Acadia | Denali |
| 2017-2019 | GMC | Acadia | SL |
| 2017-2019 | GMC | Acadia | SLE |
| 2017-2019 | GMC | Acadia | SLT |
$84.99
Stop damage before it starts with the lowest profile design on the market. The Husky Aeroskin(R) Hood Protector gives you a skin-tight fit to the contours of your hood with no-quit protection against chips, rocks, bugs, and anything the road kicks up. Plus, that sleek, aerodynamic custom touch that'll turn heads. Installation is a snap---no drilling and no special hardware required. Mounts in minutes with 3M(TM) automotive-grade adhesive, protects for life. Available in smoke and chrome and proudly made in the USA with global materials.
Installation Instructions- Husky Aeroskin(R) gives you the lowest profile protection available today for that sleek, better-than-factory custom look.
- Husky Aeroskin[R] Gives You The Lowest Profile Protection Available Today For That Sleek/Better-Than-Factory Custom Look
- Custom-molded for a skin-tight fit that matches the contours of your hood. Adds a sleek, custom look to your ride.
- Custom-Molded For A Skin-Tight Fit That Matches The Contours Of Your Hood/Adds A Sleek/Custom Look To Your Ride
- The Husky Aeroskin(R) is constructed with nail-tough acrylic for unstoppable protection your can count on.
- The Husky Aeroskin[R] Is Constructed With Nail-Tough Acrylic For Unstoppable Protection Your Can Count On
- Available in dark smoke finish for a perfect complement to virtually any vehicle.
- Available In Dark Smoke Finish For A Perfect Complement To Virtually Any Vehicle
- Mounts in minutes with 3M(TM) automotive-grade adhesive tape (included).
- Mounts In Minutes With 3M[TM] Automotive-Grade Adhesive Tape [Included]
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2016-2018 | Chevrolet | Silverado 1500 | Custom |
| 2016-2018 | Chevrolet | Silverado 1500 | High Country |
| 2016-2018 | Chevrolet | Silverado 1500 | LS |
| 2016-2018 | Chevrolet | Silverado 1500 | LT |
| 2016-2018 | Chevrolet | Silverado 1500 | LTZ |
| 2016-2018 | Chevrolet | Silverado 1500 | SSV |
| 2016-2018 | Chevrolet | Silverado 1500 | WT |
| 2019 | Chevrolet | Silverado 1500 LD | Custom |
| 2019 | Chevrolet | Silverado 1500 LD | LT |
| 2019 | Chevrolet | Silverado 1500 LD | WT |
$76.49
Stop damage before it starts with the lowest profile design on the market. The Husky Aeroskin(R) Hood Protector gives you a skin-tight fit to the contours of your hood with no-quit protection against chips, rocks, bugs, and anything the road kicks up. Plus, that sleek, aerodynamic custom touch that'll turn heads. Installation is a snap---no drilling and no special hardware required. Mounts in minutes with 3M(TM) automotive-grade adhesive, protects for life. Available in smoke and chrome and proudly made in the USA with global materials.
Installation Instructions- Husky Aeroskin(R) gives you the lowest profile protection available today for that sleek, better-than-factory custom look.
- Husky Aeroskin[R] Gives You The Lowest Profile Protection Available Today For That Sleek/Better-Than-Factory Custom Look
- Custom-molded for a skin-tight fit that matches the contours of your hood. Adds a sleek, custom look to your ride.
- Custom-Molded For A Skin-Tight Fit That Matches The Contours Of Your Hood/Adds A Sleek/Custom Look To Your Ride
- The Husky Aeroskin(R) is constructed with nail-tough acrylic for unstoppable protection your can count on.
- The Husky Aeroskin[R] Is Constructed With Nail-Tough Acrylic For Unstoppable Protection Your Can Count On
- Available in dark smoke finish for a perfect complement to virtually any vehicle.
- Available In Dark Smoke Finish For A Perfect Complement To Virtually Any Vehicle
- Mounts in minutes with 3M(TM) automotive-grade adhesive tape (included).
- Mounts In Minutes With 3M[TM] Automotive-Grade Adhesive Tape [Included]
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2016-2019 | Ford | Explorer | Base |
| 2016-2019 | Ford | Explorer | Limited |
| 2016-2019 | Ford | Explorer | Platinum |
| 2016-2019 | Ford | Explorer | XLT |
$67.99
Stop damage before it starts with the lowest profile design on the market. The Husky Aeroskin(R) Hood Protector gives you a skin-tight fit to the contours of your hood with no-quit protection against chips, rocks, bugs, and anything the road kicks up. Plus, that sleek, aerodynamic custom touch that'll turn heads. Installation is a snap---no drilling and no special hardware required. Mounts in minutes with 3M(TM) automotive-grade adhesive, protects for life. Available in smoke and chrome and proudly made in the USA with global materials.
Installation Instructions- Husky Aeroskin(R) gives you the lowest profile protection available today for that sleek, better-than-factory custom look.
- Husky Aeroskin[R] Gives You The Lowest Profile Protection Available Today For That Sleek/Better-Than-Factory Custom Look
- Custom-molded for a skin-tight fit that matches the contours of your hood. Adds a sleek, custom look to your ride.
- Custom-Molded For A Skin-Tight Fit That Matches The Contours Of Your Hood/Adds A Sleek/Custom Look To Your Ride
- The Husky Aeroskin(R) is constructed with nail-tough acrylic for unstoppable protection your can count on.
- The Husky Aeroskin[R] Is Constructed With Nail-Tough Acrylic For Unstoppable Protection Your Can Count On
- Available in dark smoke finish for a perfect complement to virtually any vehicle.
- Available In Dark Smoke Finish For A Perfect Complement To Virtually Any Vehicle
- Mounts in minutes with 3M(TM) automotive-grade adhesive tape (included).
- Mounts In Minutes With 3M[TM] Automotive-Grade Adhesive Tape [Included]
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2022 | Nissan | Murano | Midnight Edition |
| 2015-2024 | Nissan | Murano | Platinum |
| 2016 | Nissan | Murano | Platinum Hybrid |
| 2015-2023 | Nissan | Murano | S |
| 2015-2024 | Nissan | Murano | SL |
| 2016 | Nissan | Murano | SL Hybrid |
| 2015-2024 | Nissan | Murano | SV |
$67.99
Stop damage before it starts with the lowest profile design on the market. The Husky Aeroskin(R) Hood Protector gives you a skin-tight fit to the contours of your hood with no-quit protection against chips, rocks, bugs, and anything the road kicks up. Plus, that sleek, aerodynamic custom touch that'll turn heads. Installation is a snap---no drilling and no special hardware required. Mounts in minutes with 3M(TM) automotive-grade adhesive, protects for life. Available in smoke and chrome and proudly made in the USA with global materials.
Installation Instructions- Husky Aeroskin(R) gives you the lowest profile protection available today for that sleek, better-than-factory custom look.
- Husky Aeroskin[R] Gives You The Lowest Profile Protection Available Today For That Sleek/Better-Than-Factory Custom Look
- Custom-molded for a skin-tight fit that matches the contours of your hood. Adds a sleek, custom look to your ride.
- Custom-Molded For A Skin-Tight Fit That Matches The Contours Of Your Hood/Adds A Sleek/Custom Look To Your Ride
- The Husky Aeroskin(R) is constructed with nail-tough acrylic for unstoppable protection your can count on.
- The Husky Aeroskin[R] Is Constructed With Nail-Tough Acrylic For Unstoppable Protection Your Can Count On
- Available in dark smoke finish for a perfect complement to virtually any vehicle.
- Available In Dark Smoke Finish For A Perfect Complement To Virtually Any Vehicle
- Mounts in minutes with 3M(TM) automotive-grade adhesive tape (included).
- Mounts In Minutes With 3M[TM] Automotive-Grade Adhesive Tape [Included]
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2013-2015 | Honda | Civic | EX |
| 2013-2015 | Honda | Civic | EX-L |
| 2013-2015 | Honda | Civic | HF |
| 2013-2015 | Honda | Civic | Hybrid |
| 2013-2015 | Honda | Civic | Hybrid-L |
| 2013-2015 | Honda | Civic | LX |
| 2013-2015 | Honda | Civic | Natural Gas |
| 2015 | Honda | Civic | SE |
| 2013-2015 | Honda | Civic | Si |
$76.49
Stop damage before it starts with the lowest profile design on the market. The Husky Aeroskin(R) Hood Protector gives you a skin-tight fit to the contours of your hood with no-quit protection against chips, rocks, bugs, and anything the road kicks up. Plus, that sleek, aerodynamic custom touch that'll turn heads. Installation is a snap---no drilling and no special hardware required. Mounts in minutes with 3M(TM) automotive-grade adhesive, protects for life. Available in smoke and chrome and proudly made in the USA with global materials.
Installation Instructions- Husky Aeroskin(R) gives you the lowest profile protection available today for that sleek, better-than-factory custom look.
- Husky Aeroskin[R] Gives You The Lowest Profile Protection Available Today For That Sleek/Better-Than-Factory Custom Look
- Custom-molded for a skin-tight fit that matches the contours of your hood. Adds a sleek, custom look to your ride.
- Custom-Molded For A Skin-Tight Fit That Matches The Contours Of Your Hood/Adds A Sleek/Custom Look To Your Ride
- The Husky Aeroskin(R) is constructed with nail-tough acrylic for unstoppable protection your can count on.
- The Husky Aeroskin[R] Is Constructed With Nail-Tough Acrylic For Unstoppable Protection Your Can Count On
- Available in dark smoke finish for a perfect complement to virtually any vehicle.
- Available In Dark Smoke Finish For A Perfect Complement To Virtually Any Vehicle
- Mounts in minutes with 3M(TM) automotive-grade adhesive tape (included).
- Mounts In Minutes With 3M[TM] Automotive-Grade Adhesive Tape [Included]
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2018 | Toyota | RAV4 | Adventure |
| 2013-2014 | Toyota | RAV4 | EV |
| 2016-2018 | Toyota | RAV4 | Hybrid Limited |
| 2017-2018 | Toyota | RAV4 | Hybrid SE |
| 2016-2018 | Toyota | RAV4 | Hybrid XLE |
| 2013-2018 | Toyota | RAV4 | LE |
| 2013-2018 | Toyota | RAV4 | Limited |
| 2017-2018 | Toyota | RAV4 | Platinum |
| 2016-2018 | Toyota | RAV4 | SE |
| 2013-2018 | Toyota | RAV4 | XLE |
$84.99
Stop damage before it starts with the lowest profile design on the market. The Husky Aeroskin(R) Hood Protector gives you a skin-tight fit to the contours of your hood with no-quit protection against chips, rocks, bugs, and anything the road kicks up. Plus, that sleek, aerodynamic custom touch that'll turn heads. Installation is a snap---no drilling and no special hardware required. Mounts in minutes with 3M(TM) automotive-grade adhesive, protects for life. Available in smoke and chrome and proudly made in the USA with global materials.
Installation Instructions- Husky Aeroskin(R) gives you the lowest profile protection available today for that sleek, better-than-factory custom look.
- Husky Aeroskin[R] Gives You The Lowest Profile Protection Available Today For That Sleek/Better-Than-Factory Custom Look
- Custom-molded for a skin-tight fit that matches the contours of your hood. Adds a sleek, custom look to your ride.
- Custom-Molded For A Skin-Tight Fit That Matches The Contours Of Your Hood/Adds A Sleek/Custom Look To Your Ride
- The Husky Aeroskin(R) is constructed with nail-tough acrylic for unstoppable protection your can count on.
- The Husky Aeroskin[R] Is Constructed With Nail-Tough Acrylic For Unstoppable Protection Your Can Count On
- Available in dark smoke finish for a perfect complement to virtually any vehicle.
- Available In Dark Smoke Finish For A Perfect Complement To Virtually Any Vehicle
- Mounts in minutes with 3M(TM) automotive-grade adhesive tape (included).
- Mounts In Minutes With 3M[TM] Automotive-Grade Adhesive Tape [Included]
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2018-2020 | GMC | Canyon | All Terrain |
| 2021-2022 | GMC | Canyon | AT4 |
| 2015-2020 | GMC | Canyon | Base |
| 2017-2022 | GMC | Canyon | Denali |
| 2021-2022 | GMC | Canyon | Elevation |
| 2021-2022 | GMC | Canyon | Elevation Standard |
| 2015-2020 | GMC | Canyon | SL |
| 2015-2020 | GMC | Canyon | SLE |
| 2015-2020 | GMC | Canyon | SLT |
$84.99
Stop damage before it starts with the lowest profile design on the market. The Husky Aeroskin(R) Hood Protector gives you a skin-tight fit to the contours of your hood with no-quit protection against chips, rocks, bugs, and anything the road kicks up. Plus, that sleek, aerodynamic custom touch that'll turn heads. Installation is a snap---no drilling and no special hardware required. Mounts in minutes with 3M(TM) automotive-grade adhesive, protects for life. Available in smoke and chrome and proudly made in the USA with global materials.
Installation Instructions- Husky Aeroskin(R) gives you the lowest profile protection available today for that sleek, better-than-factory custom look.
- Husky Aeroskin[R] Gives You The Lowest Profile Protection Available Today For That Sleek/Better-Than-Factory Custom Look
- Custom-molded for a skin-tight fit that matches the contours of your hood. Adds a sleek, custom look to your ride.
- Custom-Molded For A Skin-Tight Fit That Matches The Contours Of Your Hood/Adds A Sleek/Custom Look To Your Ride
- The Husky Aeroskin(R) is constructed with nail-tough acrylic for unstoppable protection your can count on.
- The Husky Aeroskin[R] Is Constructed With Nail-Tough Acrylic For Unstoppable Protection Your Can Count On
- Available in dark smoke finish for a perfect complement to virtually any vehicle.
- Available In Dark Smoke Finish For A Perfect Complement To Virtually Any Vehicle
- Mounts in minutes with 3M(TM) automotive-grade adhesive tape (included).
- Mounts In Minutes With 3M[TM] Automotive-Grade Adhesive Tape [Included]
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2015-2020 | Chevrolet | Colorado | Base |
| 2015-2022 | Chevrolet | Colorado | LT |
| 2015-2022 | Chevrolet | Colorado | WT |
| 2015-2022 | Chevrolet | Colorado | Z71 |
| 2017-2022 | Chevrolet | Colorado | ZR2 |
$84.99
Stop damage before it starts with the lowest profile design on the market. The Husky Aeroskin(R) Hood Protector gives you a skin-tight fit to the contours of your hood with no-quit protection against chips, rocks, bugs, and anything the road kicks up. Plus, that sleek, aerodynamic custom touch that'll turn heads. Installation is a snap---no drilling and no special hardware required. Mounts in minutes with 3M(TM) automotive-grade adhesive, protects for life. Available in smoke and chrome and proudly made in the USA with global materials.
Installation Instructions- Husky Aeroskin(R) gives you the lowest profile protection available today for that sleek, better-than-factory custom look.
- Husky Aeroskin[R] Gives You The Lowest Profile Protection Available Today For That Sleek/Better-Than-Factory Custom Look
- Custom-molded for a skin-tight fit that matches the contours of your hood. Adds a sleek, custom look to your ride.
- Custom-Molded For A Skin-Tight Fit That Matches The Contours Of Your Hood/Adds A Sleek/Custom Look To Your Ride
- The Husky Aeroskin(R) is constructed with nail-tough acrylic for unstoppable protection your can count on.
- The Husky Aeroskin[R] Is Constructed With Nail-Tough Acrylic For Unstoppable Protection Your Can Count On
- Available in dark smoke finish for a perfect complement to virtually any vehicle.
- Available In Dark Smoke Finish For A Perfect Complement To Virtually Any Vehicle
- Mounts in minutes with 3M(TM) automotive-grade adhesive tape (included).
- Mounts In Minutes With 3M[TM] Automotive-Grade Adhesive Tape [Included]
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2009-2010 | Dodge | Ram 1500 | Sport |
| 2011-2018 | Ram | 1500 | Sport |
$67.99
Stop damage before it starts with the lowest profile design on the market. The Husky Aeroskin(R) Hood Protector gives you a skin-tight fit to the contours of your hood with no-quit protection against chips, rocks, bugs, and anything the road kicks up. Plus, that sleek, aerodynamic custom touch that'll turn heads. Installation is a snap---no drilling and no special hardware required. Mounts in minutes with 3M(TM) automotive-grade adhesive, protects for life. Available in smoke and chrome and proudly made in the USA with global materials.
Installation Instructions- Husky Aeroskin(R) gives you the lowest profile protection available today for that sleek, better-than-factory custom look.
- Husky Aeroskin[R] Gives You The Lowest Profile Protection Available Today For That Sleek/Better-Than-Factory Custom Look
- Custom-molded for a skin-tight fit that matches the contours of your hood. Adds a sleek, custom look to your ride.
- Custom-Molded For A Skin-Tight Fit That Matches The Contours Of Your Hood/Adds A Sleek/Custom Look To Your Ride
- The Husky Aeroskin(R) is constructed with nail-tough acrylic for unstoppable protection your can count on.
- The Husky Aeroskin[R] Is Constructed With Nail-Tough Acrylic For Unstoppable Protection Your Can Count On
- Available in dark smoke finish for a perfect complement to virtually any vehicle.
- Available In Dark Smoke Finish For A Perfect Complement To Virtually Any Vehicle
- Mounts in minutes with 3M(TM) automotive-grade adhesive tape (included).
- Mounts In Minutes With 3M[TM] Automotive-Grade Adhesive Tape [Included]
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2016-2017 | Hyundai | Sonata | Base |
| 2015-2017 | Hyundai | Sonata | Eco |
| 2015-2016 | Hyundai | Sonata | Hybrid |
| 2015-2017 | Hyundai | Sonata | Hybrid Limited |
| 2017 | Hyundai | Sonata | Hybrid SE |
| 2015-2017 | Hyundai | Sonata | Limited |
| 2015-2017 | Hyundai | Sonata | Limited 2.0T |
| 2016-2017 | Hyundai | Sonata | Plug-In Hybrid |
| 2016-2017 | Hyundai | Sonata | Plug-In Hybrid Limited |
| 2015-2017 | Hyundai | Sonata | SE |
| 2015-2017 | Hyundai | Sonata | Sport |
| 2015-2017 | Hyundai | Sonata | Sport 2.0T |
$67.99
Stop damage before it starts with the lowest profile design on the market. The Husky Aeroskin(R) Hood Protector gives you a skin-tight fit to the contours of your hood with no-quit protection against chips, rocks, bugs, and anything the road kicks up. Plus, that sleek, aerodynamic custom touch that'll turn heads. Installation is a snap---no drilling and no special hardware required. Mounts in minutes with 3M(TM) automotive-grade adhesive, protects for life. Available in smoke and chrome and proudly made in the USA with global materials.
Installation Instructions- Husky Aeroskin(R) gives you the lowest profile protection available today for that sleek, better-than-factory custom look.
- Husky Aeroskin[R] Gives You The Lowest Profile Protection Available Today For That Sleek/Better-Than-Factory Custom Look
- Custom-molded for a skin-tight fit that matches the contours of your hood. Adds a sleek, custom look to your ride.
- Custom-Molded For A Skin-Tight Fit That Matches The Contours Of Your Hood/Adds A Sleek/Custom Look To Your Ride
- The Husky Aeroskin(R) is constructed with nail-tough acrylic for unstoppable protection your can count on.
- The Husky Aeroskin[R] Is Constructed With Nail-Tough Acrylic For Unstoppable Protection Your Can Count On
- Available in dark smoke finish for a perfect complement to virtually any vehicle.
- Available In Dark Smoke Finish For A Perfect Complement To Virtually Any Vehicle
- Mounts in minutes with 3M(TM) automotive-grade adhesive tape (included).
- Mounts In Minutes With 3M[TM] Automotive-Grade Adhesive Tape [Included]
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2015-2017 | Toyota | Camry | Hybrid LE |
| 2015-2017 | Toyota | Camry | Hybrid SE |
| 2015-2017 | Toyota | Camry | Hybrid XLE |
| 2015-2017 | Toyota | Camry | LE |
| 2015-2017 | Toyota | Camry | SE |
| 2016 | Toyota | Camry | Special Edition |
| 2015-2017 | Toyota | Camry | XLE |
| 2015-2017 | Toyota | Camry | XSE |
$76.49
Stop damage before it starts with the lowest profile design on the market. The Husky Aeroskin(R) Hood Protector gives you a skin-tight fit to the contours of your hood with no-quit protection against chips, rocks, bugs, and anything the road kicks up. Plus, that sleek, aerodynamic custom touch that'll turn heads. Installation is a snap---no drilling and no special hardware required. Mounts in minutes with 3M(TM) automotive-grade adhesive, protects for life. Available in smoke and chrome and proudly made in the USA with global materials.
Installation Instructions- Husky Aeroskin(R) gives you the lowest profile protection available today for that sleek, better-than-factory custom look.
- Husky Aeroskin[R] Gives You The Lowest Profile Protection Available Today For That Sleek/Better-Than-Factory Custom Look
- Custom-molded for a skin-tight fit that matches the contours of your hood. Adds a sleek, custom look to your ride.
- Custom-Molded For A Skin-Tight Fit That Matches The Contours Of Your Hood/Adds A Sleek/Custom Look To Your Ride
- The Husky Aeroskin(R) is constructed with nail-tough acrylic for unstoppable protection your can count on.
- The Husky Aeroskin[R] Is Constructed With Nail-Tough Acrylic For Unstoppable Protection Your Can Count On
- Available in dark smoke finish for a perfect complement to virtually any vehicle.
- Available In Dark Smoke Finish For A Perfect Complement To Virtually Any Vehicle
- Mounts in minutes with 3M(TM) automotive-grade adhesive tape (included).
- Mounts In Minutes With 3M[TM] Automotive-Grade Adhesive Tape [Included]
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2007-2014 | Toyota | FJ Cruiser | Base |
| 2008 | Toyota | FJ Cruiser | Trail Teams Special Edition |
| 2007 | Toyota | FJ Cruiser | TRD Special Edition |
$76.49
Stop damage before it starts with the lowest profile design on the market. The Husky Aeroskin(R) Hood Protector gives you a skin-tight fit to the contours of your hood with no-quit protection against chips, rocks, bugs, and anything the road kicks up. Plus, that sleek, aerodynamic custom touch that'll turn heads. Installation is a snap---no drilling and no special hardware required. Mounts in minutes with 3M(TM) automotive-grade adhesive, protects for life. Available in smoke and chrome and proudly made in the USA with global materials.
Installation Instructions- Husky Aeroskin(R) gives you the lowest profile protection available today for that sleek, better-than-factory custom look.
- Husky Aeroskin[R] Gives You The Lowest Profile Protection Available Today For That Sleek/Better-Than-Factory Custom Look
- Custom-molded for a skin-tight fit that matches the contours of your hood. Adds a sleek, custom look to your ride.
- Custom-Molded For A Skin-Tight Fit That Matches The Contours Of Your Hood/Adds A Sleek/Custom Look To Your Ride
- The Husky Aeroskin(R) is constructed with nail-tough acrylic for unstoppable protection your can count on.
- The Husky Aeroskin[R] Is Constructed With Nail-Tough Acrylic For Unstoppable Protection Your Can Count On
- Available in dark smoke finish for a perfect complement to virtually any vehicle.
- Available In Dark Smoke Finish For A Perfect Complement To Virtually Any Vehicle
- Mounts in minutes with 3M(TM) automotive-grade adhesive tape (included).
- Mounts In Minutes With 3M[TM] Automotive-Grade Adhesive Tape [Included]
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2015-2020 | Cadillac | Escalade | Base |
| 2015-2020 | Cadillac | Escalade | Luxury |
| 2015-2020 | Cadillac | Escalade | Platinum |
| 2015-2016 | Cadillac | Escalade | Premium |
| 2017-2020 | Cadillac | Escalade | Premium Luxury |
| 2015-2020 | Cadillac | Escalade ESV | Base |
| 2015-2020 | Cadillac | Escalade ESV | Luxury |
| 2015-2020 | Cadillac | Escalade ESV | Platinum |
| 2015-2016 | Cadillac | Escalade ESV | Premium |
| 2017-2020 | Cadillac | Escalade ESV | Premium Luxury |
$76.49
Stop damage before it starts with the lowest profile design on the market. The Husky Aeroskin(R) Hood Protector gives you a skin-tight fit to the contours of your hood with no-quit protection against chips, rocks, bugs, and anything the road kicks up. Plus, that sleek, aerodynamic custom touch that'll turn heads. Installation is a snap---no drilling and no special hardware required. Mounts in minutes with 3M(TM) automotive-grade adhesive, protects for life. Available in smoke and chrome and proudly made in the USA with global materials.
Installation Instructions- Husky Aeroskin(R) gives you the lowest profile protection available today for that sleek, better-than-factory custom look.
- Husky Aeroskin[R] Gives You The Lowest Profile Protection Available Today For That Sleek/Better-Than-Factory Custom Look
- Custom-molded for a skin-tight fit that matches the contours of your hood. Adds a sleek, custom look to your ride.
- Custom-Molded For A Skin-Tight Fit That Matches The Contours Of Your Hood/Adds A Sleek/Custom Look To Your Ride
- The Husky Aeroskin(R) is constructed with nail-tough acrylic for unstoppable protection your can count on.
- The Husky Aeroskin[R] Is Constructed With Nail-Tough Acrylic For Unstoppable Protection Your Can Count On
- Available in dark smoke finish for a perfect complement to virtually any vehicle.
- Available In Dark Smoke Finish For A Perfect Complement To Virtually Any Vehicle
- Mounts in minutes with 3M(TM) automotive-grade adhesive tape (included).
- Mounts In Minutes With 3M[TM] Automotive-Grade Adhesive Tape [Included]
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2015-2020 | GMC | Yukon | Denali |
| 2015-2020 | GMC | Yukon | SLE |
| 2015-2020 | GMC | Yukon | SLT |
| 2015-2020 | GMC | Yukon XL | Denali |
| 2015-2020 | GMC | Yukon XL | SLE |
| 2015-2020 | GMC | Yukon XL | SLT |
$67.99
Stop damage before it starts with the lowest profile design on the market. The Husky Aeroskin(R) Hood Protector gives you a skin-tight fit to the contours of your hood with no-quit protection against chips, rocks, bugs, and anything the road kicks up. Plus, that sleek, aerodynamic custom touch that'll turn heads. Installation is a snap---no drilling and no special hardware required. Mounts in minutes with 3M(TM) automotive-grade adhesive, protects for life. Available in smoke and chrome and proudly made in the USA with global materials.
Installation Instructions- Husky Aeroskin(R) gives you the lowest profile protection available today for that sleek, better-than-factory custom look.
- Husky Aeroskin[R] Gives You The Lowest Profile Protection Available Today For That Sleek/Better-Than-Factory Custom Look
- Custom-molded for a skin-tight fit that matches the contours of your hood. Adds a sleek, custom look to your ride.
- Custom-Molded For A Skin-Tight Fit That Matches The Contours Of Your Hood/Adds A Sleek/Custom Look To Your Ride
- The Husky Aeroskin(R) is constructed with nail-tough acrylic for unstoppable protection your can count on.
- The Husky Aeroskin[R] Is Constructed With Nail-Tough Acrylic For Unstoppable Protection Your Can Count On
- Available in dark smoke finish for a perfect complement to virtually any vehicle.
- Available In Dark Smoke Finish For A Perfect Complement To Virtually Any Vehicle
- Mounts in minutes with 3M(TM) automotive-grade adhesive tape (included).
- Mounts In Minutes With 3M[TM] Automotive-Grade Adhesive Tape [Included]
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2014 | Chevrolet | Impala | Eco |
| 2014-2019 | Chevrolet | Impala | LS |
| 2014-2020 | Chevrolet | Impala | LT |
| 2014-2016 | Chevrolet | Impala | LTZ |
| 2017-2020 | Chevrolet | Impala | Premier |
$76.49
Stop damage before it starts with the lowest profile design on the market. The Husky Aeroskin(R) Hood Protector gives you a skin-tight fit to the contours of your hood with no-quit protection against chips, rocks, bugs, and anything the road kicks up. Plus, that sleek, aerodynamic custom touch that'll turn heads. Installation is a snap---no drilling and no special hardware required. Mounts in minutes with 3M(TM) automotive-grade adhesive, protects for life. Available in smoke and chrome and proudly made in the USA with global materials.
Installation Instructions- Husky Aeroskin(R) gives you the lowest profile protection available today for that sleek, better-than-factory custom look.
- Husky Aeroskin[R] Gives You The Lowest Profile Protection Available Today For That Sleek/Better-Than-Factory Custom Look
- Custom-molded for a skin-tight fit that matches the contours of your hood. Adds a sleek, custom look to your ride.
- Custom-Molded For A Skin-Tight Fit That Matches The Contours Of Your Hood/Adds A Sleek/Custom Look To Your Ride
- The Husky Aeroskin(R) is constructed with nail-tough acrylic for unstoppable protection your can count on.
- The Husky Aeroskin[R] Is Constructed With Nail-Tough Acrylic For Unstoppable Protection Your Can Count On
- Available in dark smoke finish for a perfect complement to virtually any vehicle.
- Available In Dark Smoke Finish For A Perfect Complement To Virtually Any Vehicle
- Mounts in minutes with 3M(TM) automotive-grade adhesive tape (included).
- Mounts In Minutes With 3M[TM] Automotive-Grade Adhesive Tape [Included]
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2018-2023 | Chevrolet | Traverse | High Country |
| 2018-2021 | Chevrolet | Traverse | L |
| 2013-2023 | Chevrolet | Traverse | LS |
| 2013-2023 | Chevrolet | Traverse | LT |
| 2013-2016 | Chevrolet | Traverse | LTZ |
| 2017-2023 | Chevrolet | Traverse | Premier |
| 2018-2023 | Chevrolet | Traverse | RS |
$67.99
Stop damage before it starts with the lowest profile design on the market. The Husky Aeroskin(R) Hood Protector gives you a skin-tight fit to the contours of your hood with no-quit protection against chips, rocks, bugs, and anything the road kicks up. Plus, that sleek, aerodynamic custom touch that'll turn heads. Installation is a snap---no drilling and no special hardware required. Mounts in minutes with 3M(TM) automotive-grade adhesive, protects for life. Available in smoke and chrome and proudly made in the USA with global materials.
Installation Instructions- Husky Aeroskin(R) gives you the lowest profile protection available today for that sleek, better-than-factory custom look.
- Husky Aeroskin[R] Gives You The Lowest Profile Protection Available Today For That Sleek/Better-Than-Factory Custom Look
- Custom-molded for a skin-tight fit that matches the contours of your hood. Adds a sleek, custom look to your ride.
- Custom-Molded For A Skin-Tight Fit That Matches The Contours Of Your Hood/Adds A Sleek/Custom Look To Your Ride
- The Husky Aeroskin(R) is constructed with nail-tough acrylic for unstoppable protection your can count on.
- The Husky Aeroskin[R] Is Constructed With Nail-Tough Acrylic For Unstoppable Protection Your Can Count On
- Available in dark smoke finish for a perfect complement to virtually any vehicle.
- Available In Dark Smoke Finish For A Perfect Complement To Virtually Any Vehicle
- Mounts in minutes with 3M(TM) automotive-grade adhesive tape (included).
- Mounts In Minutes With 3M[TM] Automotive-Grade Adhesive Tape [Included]
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2013-2014 | Ford | Mustang | Base |
| 2013 | Ford | Mustang | Boss 302 |
| 2013-2014 | Ford | Mustang | GT |
| 2013-2014 | Ford | Mustang | Shelby GT500 |
$67.99
Stop damage before it starts with the lowest profile design on the market. The Husky Aeroskin(R) Hood Protector gives you a skin-tight fit to the contours of your hood with no-quit protection against chips, rocks, bugs, and anything the road kicks up. Plus, that sleek, aerodynamic custom touch that'll turn heads. Installation is a snap---no drilling and no special hardware required. Mounts in minutes with 3M(TM) automotive-grade adhesive, protects for life. Available in smoke and chrome and proudly made in the USA with global materials.
Installation Instructions- Husky Aeroskin(R) gives you the lowest profile protection available today for that sleek, better-than-factory custom look.
- Husky Aeroskin[R] Gives You The Lowest Profile Protection Available Today For That Sleek/Better-Than-Factory Custom Look
- Custom-molded for a skin-tight fit that matches the contours of your hood. Adds a sleek, custom look to your ride.
- Custom-Molded For A Skin-Tight Fit That Matches The Contours Of Your Hood/Adds A Sleek/Custom Look To Your Ride
- The Husky Aeroskin(R) is constructed with nail-tough acrylic for unstoppable protection your can count on.
- The Husky Aeroskin[R] Is Constructed With Nail-Tough Acrylic For Unstoppable Protection Your Can Count On
- Available in dark smoke finish for a perfect complement to virtually any vehicle.
- Available In Dark Smoke Finish For A Perfect Complement To Virtually Any Vehicle
- Mounts in minutes with 3M(TM) automotive-grade adhesive tape (included).
- Mounts In Minutes With 3M[TM] Automotive-Grade Adhesive Tape [Included]
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2013-2018 | Ford | Taurus | Limited |
| 2013-2018 | Ford | Taurus | SE |
| 2013-2018 | Ford | Taurus | SEL |
| 2013-2018 | Ford | Taurus | SHO |
$84.99
Stop damage before it starts with the lowest profile design on the market. The Husky Aeroskin(R) Hood Protector gives you a skin-tight fit to the contours of your hood with no-quit protection against chips, rocks, bugs, and anything the road kicks up. Plus, that sleek, aerodynamic custom touch that'll turn heads. Installation is a snap---no drilling and no special hardware required. Mounts in minutes with 3M(TM) automotive-grade adhesive, protects for life. Available in smoke and chrome and proudly made in the USA with global materials.
Installation Instructions- Husky Aeroskin(R) gives you the lowest profile protection available today for that sleek, better-than-factory custom look.
- Husky Aeroskin[R] Gives You The Lowest Profile Protection Available Today For That Sleek/Better-Than-Factory Custom Look
- Custom-molded for a skin-tight fit that matches the contours of your hood. Adds a sleek, custom look to your ride.
- Custom-Molded For A Skin-Tight Fit That Matches The Contours Of Your Hood/Adds A Sleek/Custom Look To Your Ride
- The Husky Aeroskin(R) is constructed with nail-tough acrylic for unstoppable protection your can count on.
- The Husky Aeroskin[R] Is Constructed With Nail-Tough Acrylic For Unstoppable Protection Your Can Count On
- Available in dark smoke finish for a perfect complement to virtually any vehicle.
- Available In Dark Smoke Finish For A Perfect Complement To Virtually Any Vehicle
- Mounts in minutes with 3M(TM) automotive-grade adhesive tape (included).
- Mounts In Minutes With 3M[TM] Automotive-Grade Adhesive Tape [Included]
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2014-2023 | Ford | Transit Connect | Titanium |
| 2014-2023 | Ford | Transit Connect | XL |
| 2014-2023 | Ford | Transit Connect | XLT |
| 2024-2025 | Ford | Transit-150 | Base |
| 2024-2025 | Ford | Transit-150 | PTV |
| 2024-2025 | Ford | Transit-250 | Base |
| 2024-2025 | Ford | Transit-250 | PTV |
| 2024-2025 | Ford | Transit-350 | Base |
| 2024-2025 | Ford | Transit-350 | PTV |
| 2024-2025 | Ford | Transit-350 | XL |
| 2024-2025 | Ford | Transit-350 | XLT |
$76.49
Stop damage before it starts with the lowest profile design on the market. The Husky Aeroskin(R) Hood Protector gives you a skin-tight fit to the contours of your hood with no-quit protection against chips, rocks, bugs, and anything the road kicks up. Plus, that sleek, aerodynamic custom touch that'll turn heads. Installation is a snap---no drilling and no special hardware required. Mounts in minutes with 3M(TM) automotive-grade adhesive, protects for life. Available in smoke and chrome and proudly made in the USA with global materials.
Installation Instructions- Husky Aeroskin(R) gives you the lowest profile protection available today for that sleek, better-than-factory custom look.
- Husky Aeroskin[R] Gives You The Lowest Profile Protection Available Today For That Sleek/Better-Than-Factory Custom Look
- Custom-molded for a skin-tight fit that matches the contours of your hood. Adds a sleek, custom look to your ride.
- Custom-Molded For A Skin-Tight Fit That Matches The Contours Of Your Hood/Adds A Sleek/Custom Look To Your Ride
- The Husky Aeroskin(R) is constructed with nail-tough acrylic for unstoppable protection your can count on.
- The Husky Aeroskin[R] Is Constructed With Nail-Tough Acrylic For Unstoppable Protection Your Can Count On
- Available in dark smoke finish for a perfect complement to virtually any vehicle.
- Available In Dark Smoke Finish For A Perfect Complement To Virtually Any Vehicle
- Mounts in minutes with 3M(TM) automotive-grade adhesive tape (included).
- Mounts In Minutes With 3M[TM] Automotive-Grade Adhesive Tape [Included]
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2020-2024 | Ford | Expedition | King Ranch |
| 2018-2024 | Ford | Expedition | Limited |
| 2020-2024 | Ford | Expedition | Max King Ranch |
| 2018-2024 | Ford | Expedition | Max Limited |
| 2018-2024 | Ford | Expedition | Max Platinum |
| 2018-2024 | Ford | Expedition | Max SSV |
| 2018-2019,2022 | Ford | Expedition | Max XL |
| 2018-2024 | Ford | Expedition | Max XLT |
| 2018-2024 | Ford | Expedition | Platinum |
| 2018-2024 | Ford | Expedition | SSV |
| 2022-2024 | Ford | Expedition | Timberline |
| 2018-2019,2022 | Ford | Expedition | XL |
| 2023-2024 | Ford | Expedition | XL STX |
| 2018-2024 | Ford | Expedition | XLT |
$84.99
Stop damage before it starts with the lowest profile design on the market. The Husky Aeroskin(R) Hood Protector gives you a skin-tight fit to the contours of your hood with no-quit protection against chips, rocks, bugs, and anything the road kicks up. Plus, that sleek, aerodynamic custom touch that'll turn heads. Installation is a snap---no drilling and no special hardware required. Mounts in minutes with 3M(TM) automotive-grade adhesive, protects for life. Available in smoke and chrome and proudly made in the USA with global materials.
Installation Instructions- Husky Aeroskin(R) gives you the lowest profile protection available today for that sleek, better-than-factory custom look.
- Husky Aeroskin[R] Gives You The Lowest Profile Protection Available Today For That Sleek/Better-Than-Factory Custom Look
- Custom-molded for a skin-tight fit that matches the contours of your hood. Adds a sleek, custom look to your ride.
- Custom-Molded For A Skin-Tight Fit That Matches The Contours Of Your Hood/Adds A Sleek/Custom Look To Your Ride
- The Husky Aeroskin(R) is constructed with nail-tough acrylic for unstoppable protection your can count on.
- The Husky Aeroskin[R] Is Constructed With Nail-Tough Acrylic For Unstoppable Protection Your Can Count On
- Available in dark smoke finish for a perfect complement to virtually any vehicle.
- Available In Dark Smoke Finish For A Perfect Complement To Virtually Any Vehicle
- Mounts in minutes with 3M(TM) automotive-grade adhesive tape (included).
- Mounts In Minutes With 3M[TM] Automotive-Grade Adhesive Tape [Included]
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2016-2024 | Nissan | TITAN XD | Platinum Reserve |
| 2016-2024 | Nissan | TITAN XD | PRO-4X |
| 2016-2023 | Nissan | TITAN XD | S |
| 2016-2021 | Nissan | TITAN XD | SL |
| 2016-2024 | Nissan | TITAN XD | SV |
$84.99
Stop damage before it starts with the lowest profile design on the market. The Husky Aeroskin(R) Hood Protector gives you a skin-tight fit to the contours of your hood with no-quit protection against chips, rocks, bugs, and anything the road kicks up. Plus, that sleek, aerodynamic custom touch that'll turn heads. Installation is a snap---no drilling and no special hardware required. Mounts in minutes with 3M(TM) automotive-grade adhesive, protects for life. Available in smoke and chrome and proudly made in the USA with global materials.
Installation Instructions- Husky Aeroskin(R) gives you the lowest profile protection available today for that sleek, better-than-factory custom look.
- Husky Aeroskin[R] Gives You The Lowest Profile Protection Available Today For That Sleek/Better-Than-Factory Custom Look
- Custom-molded for a skin-tight fit that matches the contours of your hood. Adds a sleek, custom look to your ride.
- Custom-Molded For A Skin-Tight Fit That Matches The Contours Of Your Hood/Adds A Sleek/Custom Look To Your Ride
- The Husky Aeroskin(R) is constructed with nail-tough acrylic for unstoppable protection your can count on.
- The Husky Aeroskin[R] Is Constructed With Nail-Tough Acrylic For Unstoppable Protection Your Can Count On
- Available in dark smoke finish for a perfect complement to virtually any vehicle.
- Available In Dark Smoke Finish For A Perfect Complement To Virtually Any Vehicle
- Mounts in minutes with 3M(TM) automotive-grade adhesive tape (included).
- Mounts In Minutes With 3M[TM] Automotive-Grade Adhesive Tape [Included]
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2014-2021 | Toyota | Tundra | 1794 Edition |
| 2014-2021 | Toyota | Tundra | Limited |
| 2021 | Toyota | Tundra | Nightshade |
| 2014-2021 | Toyota | Tundra | Platinum |
| 2014-2021 | Toyota | Tundra | SR |
| 2014-2021 | Toyota | Tundra | SR5 |
| 2021 | Toyota | Tundra | Trail |
| 2015-2017,2019-2021 | Toyota | Tundra | TRD Pro |
Showing 240/914
Explore Related Collections
- Choosing a selection results in a full page refresh.
- Opens in a new window.