MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 23285 helps keep the check engine light off. DIY installation is easy with the proper tools (no cutting or welding required). With features including mandrel-bent tubing to eliminate flow restrictions and stainless steel construction to resist corrosion, you can have confidence in the quality of this catalytic converter. Using state-of-the-art 3D scanning systems in the design process, the MagnaFlow metrology department ensures this new part to fit and function like the original equipment. This direct-fit catalytic converter is designed to fit the 1994-2001 Dodge Ram 1500, 1994-2002 Dodge Ram 2500, and additional vehicles. Hardware is included to eliminate the hassle of working with corroded factory parts. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.

• Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
• Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
• OE-sized barbed exhaust hangers made from corrosion-resistant 410 stainless steel, designed to reduce noise and vibration
• High Strength 16 Gauge 409 Stainless Steel Tubing For Exceptional Corrosion Resistance And Maximum Service Life
• Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
• Expertly Crafted To Replicate Oem-Like Flow Dynamics/Maintaining Factory Performance And Fuel Efficiency
• Simplifies Installation With Essential Gaskets And Hardware Being Included In The Box
• OE-Sized Barbed Exhaust Hangers Made From Corrosion-Resistant 410 Stainless Steel
• Your Trusted Source For EPA-Compliant Catalytic Converters
• Mandrel Bent Tubing Retains Oem-Like Design And Geometry
• Durable 308 stainless steel MIG welds

This Part Fits:

Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 23227. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 1997-1999 Jeep Wrangler and interchanges with OE parts 5083 056AB and 5083 057AB, among others. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.

• Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
• Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
• OE-sized barbed exhaust hangers made from corrosion-resistant 410 stainless steel, designed to reduce noise and vibration
• High Strength 16 Gauge 409 Stainless Steel Tubing For Exceptional Corrosion Resistance And Maximum Service Life
• Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
• Expertly Crafted To Replicate Oem-Like Flow Dynamics/Maintaining Factory Performance And Fuel Efficiency
• Torca Accuseal Exhaust Clamps Provide A Full 360-Degree Equally Distributed Clamping Force
• Simplifies Installation With Essential Gaskets And Hardware Being Included In The Box
• OE-Sized Barbed Exhaust Hangers Made From Corrosion-Resistant 410 Stainless Steel
• Your Trusted Source For EPA-Compliant Catalytic Converters
• Mandrel Bent Tubing Retains Oem-Like Design And Geometry
• Durable 308 stainless steel MIG welds

This Part Fits:

Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 23226. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. MagnaFlow 23226 interchanges with OE parts 5083 054AA, 5083 054AD, 5201 9480AB, 5201 9480AC, 5201 9480AD, 5201 9480AE, 5201 9480AH, 52019480, 52019482, 52019483, 52019600, 5202 0027AC, 52020486, 52022019, 5210 1112AD, 5210 1112AF, 5210 1401AB, 5210 1490AA, 52101221, 52101401. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.

• Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
• Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
• OE-sized barbed exhaust hangers made from corrosion-resistant 410 stainless steel, designed to reduce noise and vibration
• High Strength 16 Gauge 409 Stainless Steel Tubing For Exceptional Corrosion Resistance And Maximum Service Life
• Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
• Expertly Crafted To Replicate Oem-Like Flow Dynamics/Maintaining Factory Performance And Fuel Efficiency
• Simplifies Installation With Essential Gaskets And Hardware Being Included In The Box
• Your Trusted Source For EPA-Compliant Catalytic Converters
• Durable 308 stainless steel MIG welds

This Part Fits:

Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 23120. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This Direct-Fit Catalytic Converter is designed to fit the 1996-1997 Lexus LX450 4.5L & 1995-1997 Toyota Land Cruiser 4.5L. MagnaFlow 23120 includes (1) Flange Gasket, (3) Flat Ring Gaskets and interchanges with OE parts 17401-66009, 17401-66090. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.

• Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
• Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
• OE-sized barbed exhaust hangers made from corrosion-resistant 410 stainless steel, designed to reduce noise and vibration
• High Strength 16 Gauge 409 Stainless Steel Tubing For Exceptional Corrosion Resistance And Maximum Service Life
• Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
• Expertly Crafted To Replicate Oem-Like Flow Dynamics/Maintaining Factory Performance And Fuel Efficiency
• Simplifies Installation With Essential Gaskets And Hardware Being Included In The Box
• Your Trusted Source For EPA-Compliant Catalytic Converters
• Mandrel Bent Tubing Retains Oem-Like Design And Geometry
• Durable 308 stainless steel MIG welds

This Part Fits:

Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 23-169. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2004-2009 Toyota Prius and interchanges with OE part 17410-21500. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

• Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
• Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
• OE-sized barbed exhaust hangers made from corrosion-resistant 410 stainless steel, designed to reduce noise and vibration
• High Strength 16 Gauge 409 Stainless Steel Tubing For Exceptional Corrosion Resistance And Maximum Service Life
• Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
• Expertly Crafted To Replicate Oem-Like Flow Dynamics/Maintaining Factory Performance And Fuel Efficiency
• Torca Accuseal Exhaust Clamps Provide A Full 360-Degree Equally Distributed Clamping Force
• Simplifies Installation With Essential Gaskets And Hardware Being Included In The Box
• OE-Sized Barbed Exhaust Hangers Made From Corrosion-Resistant 410 Stainless Steel
• Your Trusted Source For EPA-Compliant Catalytic Converters
• Mandrel Bent Tubing Retains Oem-Like Design And Geometry
• Durable 308 stainless steel MIG welds

This Part Fits:

Keep the check engine light off with MagnaFlow Standard Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 22757. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed to fit the 1987-1993 Mazda B2200, 1983-1986 Nissan 720, and additional vehicles. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.

• Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
• Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
• OE-sized barbed exhaust hangers made from corrosion-resistant 410 stainless steel, designed to reduce noise and vibration
• High Strength 16 Gauge 409 Stainless Steel Tubing For Exceptional Corrosion Resistance And Maximum Service Life
• Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
• Expertly Crafted To Replicate Oem-Like Flow Dynamics/Maintaining Factory Performance And Fuel Efficiency
• Simplifies Installation With Essential Gaskets And Hardware Being Included In The Box
• Your Trusted Source For EPA-Compliant Catalytic Converters
• Durable 308 stainless steel MIG welds

This Part Fits:

Keep the check engine light off with MagnaFlow Standard Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 22756. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 1990-1995 Nissan 300ZX and interchanges with OE parts 20020-33P02 and 20020-40P08, among others. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.

• Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
• Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
• OE-sized barbed exhaust hangers made from corrosion-resistant 410 stainless steel, designed to reduce noise and vibration
• High Strength 16 Gauge 409 Stainless Steel Tubing For Exceptional Corrosion Resistance And Maximum Service Life
• Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
• Expertly Crafted To Replicate Oem-Like Flow Dynamics/Maintaining Factory Performance And Fuel Efficiency
• Simplifies Installation With Essential Gaskets And Hardware Being Included In The Box
• OE-Sized Barbed Exhaust Hangers Made From Corrosion-Resistant 410 Stainless Steel
• Your Trusted Source For EPA-Compliant Catalytic Converters
• Mandrel Bent Tubing Retains Oem-Like Design And Geometry
• Durable 308 stainless steel MIG welds

This Part Fits:

Keep the check engine light off with MagnaFlow Standard Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 22755. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 1990-1995 Nissan 300ZX and interchanges with OE parts 20010-33P02 and 20010-40P08, among others. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.

• Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
• Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
• OE-sized barbed exhaust hangers made from corrosion-resistant 410 stainless steel, designed to reduce noise and vibration
• High Strength 16 Gauge 409 Stainless Steel Tubing For Exceptional Corrosion Resistance And Maximum Service Life
• Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
• Expertly Crafted To Replicate Oem-Like Flow Dynamics/Maintaining Factory Performance And Fuel Efficiency
• Simplifies Installation With Essential Gaskets And Hardware Being Included In The Box
• OE-Sized Barbed Exhaust Hangers Made From Corrosion-Resistant 410 Stainless Steel
• Your Trusted Source For EPA-Compliant Catalytic Converters
• Mandrel Bent Tubing Retains Oem-Like Design And Geometry
• Durable 308 stainless steel MIG welds

This Part Fits:

Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 22644. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 1996-2001 Honda Prelude and interchanges with OE part 18160-P5M-A00. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.

• Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
• Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
• OE-sized barbed exhaust hangers made from corrosion-resistant 410 stainless steel, designed to reduce noise and vibration
• High Strength 16 Gauge 409 Stainless Steel Tubing For Exceptional Corrosion Resistance And Maximum Service Life
• Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
• Expertly Crafted To Replicate Oem-Like Flow Dynamics/Maintaining Factory Performance And Fuel Efficiency
• Simplifies Installation With Essential Gaskets And Hardware Being Included In The Box
• Your Trusted Source For EPA-Compliant Catalytic Converters
• Durable 308 stainless steel MIG welds

This Part Fits:

Keep the check engine light off with MagnaFlow Standard Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 22637. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This Direct-Fit Catalytic Converter is designed to fit the 1992-1995 Acura Integra 1.8L & 1992-1993 Acura Integra 1.7L. MagnaFlow 22637 includes (1) Donut Gasket, (1) Flange Gasket and interchanges with OE parts 18160-P75-A00, 18160-P75-A01, 18160-P75-A50, 18160-P75-A51. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.

• Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
• Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
• OE-sized barbed exhaust hangers made from corrosion-resistant 410 stainless steel, designed to reduce noise and vibration
• High Strength 16 Gauge 409 Stainless Steel Tubing For Exceptional Corrosion Resistance And Maximum Service Life
• Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
• Expertly Crafted To Replicate Oem-Like Flow Dynamics/Maintaining Factory Performance And Fuel Efficiency
• Simplifies Installation With Essential Gaskets And Hardware Being Included In The Box
• Providing Assurance Of Genuine Compliance While Delivering Quality That Will Last
• Durable 308 stainless steel MIG welds

This Part Fits:

Keep the check engine light off with MagnaFlow Standard Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 22636. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. MagnaFlow 22636 includes (1) Donut Gasket, (1) Flange Gasket and interchanges with OE parts 18150-P0A-A02, 18150-P0A-A12, 18150-P0A-A22, 18160-P0A-A00, 18160-P0A-A01, 18160-P0A-A02, 18160-P0A-A10, 18160-P0A-A11, 18160-P0A-A12, 18160-P0A-A20, 18160-P0A-A21, 18160-P0A-A22, 18160-P28-A10, 18160-P28-A20, 18160-P28-A30, 18160-P28-A40, 18160-P28-Y41, 18160-P30-A00, 18160-PM5-661, 18160-PM5-663. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.

• Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
• Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
• OE-sized barbed exhaust hangers made from corrosion-resistant 410 stainless steel, designed to reduce noise and vibration
• High Strength 16 Gauge 409 Stainless Steel Tubing For Exceptional Corrosion Resistance And Maximum Service Life
• Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
• Expertly Crafted To Replicate Oem-Like Flow Dynamics/Maintaining Factory Performance And Fuel Efficiency
• Simplifies Installation With Essential Gaskets And Hardware Being Included In The Box
• Providing Assurance Of Genuine Compliance While Delivering Quality That Will Last
• Durable 308 stainless steel MIG welds

This Part Fits:

Keep the check engine light off with MagnaFlow Standard Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 22621. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 1991-1993 Honda Accord. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.

• Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
• Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
• OE-sized barbed exhaust hangers made from corrosion-resistant 410 stainless steel, designed to reduce noise and vibration
• High Strength 16 Gauge 409 Stainless Steel Tubing For Exceptional Corrosion Resistance And Maximum Service Life
• Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
• Expertly Crafted To Replicate Oem-Like Flow Dynamics/Maintaining Factory Performance And Fuel Efficiency
• Simplifies Installation With Essential Gaskets And Hardware Being Included In The Box
• Your Trusted Source For EPA-Compliant Catalytic Converters
• Durable 308 stainless steel MIG welds

This Part Fits:

Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 21-710. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2015-2019 Ford Transit-250, 2015-2019 Ford Transit-350, and more, this direct-fit catalytic converter also interchanges with OE parts CK4Z-5F250-P and CK4Z-5E212-E, among others. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

• Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
• Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
• OE-sized barbed exhaust hangers made from corrosion-resistant 410 stainless steel, designed to reduce noise and vibration
• High Strength 16 Gauge 409 Stainless Steel Tubing For Exceptional Corrosion Resistance And Maximum Service Life
• Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
• Expertly Crafted To Replicate Oem-Like Flow Dynamics/Maintaining Factory Performance And Fuel Efficiency
• Precision Stamped Collector Design For Optimal Exhaust Flow/Engine Efficiency And Fuel Economy
• Torca Accuseal Exhaust Clamps Provide A Full 360-Degree Equally Distributed Clamping Force
• Simplifies Installation With Essential Gaskets And Hardware Being Included In The Box
• Your Trusted Source For EPA-Compliant Catalytic Converters
• Mandrel Bent Tubing Retains Oem-Like Design And Geometry
• Durable 308 stainless steel MIG welds

This Part Fits:

Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 21-475. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2015-2020 Ford F-150 and interchanges with OE parts GL3Z-5E212-B and FL3Z-5E212-J. Hardware is included to eliminate the hassle of working with corroded factory parts. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

• Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
• Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
• OE-sized barbed exhaust hangers made from corrosion-resistant 410 stainless steel, designed to reduce noise and vibration
• High Strength 16 Gauge 409 Stainless Steel Tubing For Exceptional Corrosion Resistance And Maximum Service Life
• Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
• Expertly Crafted To Replicate Oem-Like Flow Dynamics/Maintaining Factory Performance And Fuel Efficiency
• Precision Stamped Collector Design For Optimal Exhaust Flow/Engine Efficiency And Fuel Economy
• Torca Accuseal Exhaust Clamps Provide A Full 360-Degree Equally Distributed Clamping Force
• Simplifies Installation With Essential Gaskets And Hardware Being Included In The Box
• OE-Sized Barbed Exhaust Hangers Made From Corrosion-Resistant 410 Stainless Steel
• Your Trusted Source For EPA-Compliant Catalytic Converters
• Mandrel Bent Tubing Retains Oem-Like Design And Geometry
• Durable 308 stainless steel MIG welds

This Part Fits:

Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 21-474. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2015-2020 Ford F-150 and interchanges with OE parts GL3Z-5E212-A and FL3Z-5E212-A. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

• Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
• Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
• OE-sized barbed exhaust hangers made from corrosion-resistant 410 stainless steel, designed to reduce noise and vibration
• High Strength 16 Gauge 409 Stainless Steel Tubing For Exceptional Corrosion Resistance And Maximum Service Life
• Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
• Expertly Crafted To Replicate Oem-Like Flow Dynamics/Maintaining Factory Performance And Fuel Efficiency
• Simplifies Installation With Essential Gaskets And Hardware Being Included In The Box
• Your Trusted Source For EPA-Compliant Catalytic Converters
• Mandrel Bent Tubing Retains Oem-Like Design And Geometry
• Durable 308 stainless steel MIG welds

This Part Fits:

Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 21-252. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed to fit the 2011-2019 Chevrolet Silverado 2500 HD, 2011-2019 GMC Sierra 2500 HD, and additional vehicles. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

• Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
• Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
• OE-sized barbed exhaust hangers made from corrosion-resistant 410 stainless steel, designed to reduce noise and vibration
• High Strength 16 Gauge 409 Stainless Steel Tubing For Exceptional Corrosion Resistance And Maximum Service Life
• Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
• Expertly Crafted To Replicate Oem-Like Flow Dynamics/Maintaining Factory Performance And Fuel Efficiency
• Precision Stamped Collector Design For Optimal Exhaust Flow/Engine Efficiency And Fuel Economy
• Torca Accuseal Exhaust Clamps Provide A Full 360-Degree Equally Distributed Clamping Force
• Simplifies Installation With Essential Gaskets And Hardware Being Included In The Box
• OE-Sized Barbed Exhaust Hangers Made From Corrosion-Resistant 410 Stainless Steel
• Your Trusted Source For EPA-Compliant Catalytic Converters
• Mandrel Bent Tubing Retains Oem-Like Design And Geometry
• Durable 308 stainless steel MIG welds

This Part Fits:

Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 21-030. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2012-2024 Jeep Wrangler, 2020-2023 Jeep Gladiator, and more, this direct-fit catalytic converter also interchanges with OE parts 6808 5148AH and 6808 5148AB, among others. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

• Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
• Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
• OE-sized barbed exhaust hangers made from corrosion-resistant 410 stainless steel, designed to reduce noise and vibration
• High Strength 16 Gauge 409 Stainless Steel Tubing For Exceptional Corrosion Resistance And Maximum Service Life
• Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
• Expertly Crafted To Replicate Oem-Like Flow Dynamics/Maintaining Factory Performance And Fuel Efficiency
• Torca Accuseal Exhaust Clamps Provide A Full 360-Degree Equally Distributed Clamping Force
• Simplifies Installation With Essential Gaskets And Hardware Being Included In The Box
• Your Trusted Source For EPA-Compliant Catalytic Converters
• Mandrel Bent Tubing Retains Oem-Like Design And Geometry
• Durable 308 stainless steel MIG welds

This Part Fits:

Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 21-029. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2012-2017 Jeep Wrangler and 2018 Jeep Wrangler JK, this direct-fit catalytic converter also interchanges with OE parts 6808 5119AC and 6808 5119AB. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

• Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
• Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
• OE-sized barbed exhaust hangers made from corrosion-resistant 410 stainless steel, designed to reduce noise and vibration
• High Strength 16 Gauge 409 Stainless Steel Tubing For Exceptional Corrosion Resistance And Maximum Service Life
• Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
• Expertly Crafted To Replicate Oem-Like Flow Dynamics/Maintaining Factory Performance And Fuel Efficiency
• Torca Accuseal Exhaust Clamps Provide A Full 360-Degree Equally Distributed Clamping Force
• Simplifies Installation With Essential Gaskets And Hardware Being Included In The Box
• Your Trusted Source For EPA-Compliant Catalytic Converters
• Mandrel Bent Tubing Retains Oem-Like Design And Geometry
• Durable 308 stainless steel MIG welds

This Part Fits:

The MagnaFlow 2025-2026 RAM 1500 RHO SPEQ Series Cat-Back Performance Exhaust System 19704 brings out the personality of your truck with our signature resonant, powerful exhaust tone and dyno-proven performance. #19704 3” diameter mandrel bent main piping passes through a No Drone Technology (NDT) chamber before exiting in a dual split rear exit with 5” black chrome tips. This full-size truck exhaust kit is the perfect equalizer between sound and performance. Upgrade your truck to the next level with an exhaust that has the pipes to put other trucks to shame. With this system your truck will produce moderate exterior and mild interior sound levels while leaving other trucks feeling envious at every stoplight. Exhaust kit 19704 features a cat-back exhaust layout that replaces your trucks’ stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. Also included is a mid-pipe standard OE valve replacement. 19704 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.

• No-Drone-Technology Allows For A Quiet Cabin
• Increased Horsepower And Torque
• 100 Percent Stainless Steel
• 100% Stainless Steel

This Part Fits:

The MagnaFlow SPEQ Series #19699 cat-back exhaust system is engineered as the ultimate performance upgrade for the Dodge Charger powered by the new twin-turbo L6 3.0L Sixpack. Designed to amplify modern muscle sound, flow, and power, this dyno proven system combines precision manufacturing with an aggressive sound profile. It is constructed from high-flow 3” mandrel-bent premium 304 stainless steel tubing for exceptional corrosion resistance and long-term structural integrity. Connections are secured using race-bred V-band clamps, providing a leak-free assembly that remains stable across heat cycles. Exhaust flow is optimized through a Tru-X crossover x-pipe that enhances pulse scavenging and smooths transitions. This feeds into mid-body straight pipe deletes and a pair of straight-through mufflers engineered specifically for the high-output Sixpack engine. The result is a deep, assertive tone that comes alive under throttle while preserving a drone-free cabin experience at cruising speeds. The system exits through dual split 4.5” black chrome tips etched with the MagnaFlow logo, delivering a striking appearance that matches the system’s performance-focused attitude. Fitment is precise due to 3D scanning and CNC robotic manufacturing, ensuring a direct-fit installation that replaces all factory components behind the catalytic converters. Reinforced hangers provide solid attachment to OEM mounting points, maintaining secure alignment and stability. Full factory valve functionality is retained by MagnaFlow’s cast stainless performance valves, allowing full integration with the Charger’s active sound management and drive modes. Backed by MagnaFlow’s limited lifetime construction warranty, this cat-back delivers a measurable upgrade in sound quality, flow efficiency, and overall power. Designed with a focus on real-world performance, it enhances the twin-turbo Charger with a power-focused exhaust tone and the premium construction demanded by modern high-output muscle.

• No-Drone-Technology allows for a quiet cabin
• Increased Horsepower and Torque
• 100% Stainless Steel

The MagnaFlow 2025–2026 Toyota Camry SPEQ series Cat-Back Performance Exhaust System is designed to enhance the refined performance of your FWD 2.5L hybrid powertrain with our signature deep resonant exhaust note and dyno-proven gains. Exhaust kit #19698 is configured in a cat-back layout, replacing the stock system from just after the catalytic converter for improved flow and tone. #19698 is engineered with mandrel-bent 2.5” inch main piping and features a 14” inch No Drone Technology (NDT) resonator. The system finishes with a sleek Dual Straight Driver Side Rear exit with 4” inch Black chrome tips. Whether you're pulling away from a stoplight or cruising the highway, this system delivers Moderate exterior and Mild interior sound levels that give your hybrid Camry a sporty edge without disrupting cabin comfort. Built with the latest in 3D scanning technology for a precise, direct-fit installation, the 2025–2026 Camry Hybrid exhaust is manufactured using CNC robotic processes for consistency and quality. Like all MagnaFlow performance systems, it’s backed by a 1-year limited finish warranty and a limited lifetime construction warranty.

• No-Drone-Technology allows for a quiet cabin
• Increased Horsepower and Torque
• 100% Stainless Steel

This Part Fits:

The MagnaFlow SPEQ Series Performance Exhaust System #19696 is engineered for enthusiasts who demand more from sound, style, and performance. Designed specifically for the 2024–2026 DE5 Acura Integra Type S with the K20C8 2.0L, this cat-back system delivers dyno-proven power gains, a bold performance tone, cutting-edge modularity, and an upgraded driving experience. At its core is a high-flow 3” mandrel-bent stainless steel architecture that channels exhaust gases through three straight-through mufflers, converging in a triple center exit with 4.5” black chrome tips etched with the MagnaFlow logo. The result is a deep, aggressive tone that commands attention without the drone. But this system isn’t just about sound. It’s about control. Thanks to MagnaFlow’s modular design, you can fine-tune your exhaust note by swapping between muffler and straight-pipe modules using quick release racing bred V-band clamps. Whether you're carving canyon roads or hitting the track, you choose how your Integra speaks. Installation is seamless, thanks to precision 3D scanning and a direct-fit layout that replaces all OEM components from the catalytic converter back while retaining full valve functionality thanks to MagnaFlow’s cast stainless active performance valve. Built from corrosion-resistant stainless steel and manufactured with CNC robotic precision, #19696 is backed by MagnaFlow’s limited lifetime construction warranty.

• No-Drone-Technology allows for a quiet cabin
• Increased Horsepower and Torque
• 100% Stainless Steel

This Part Fits:

The Black DPF series is our premier MagnaFlow Performance DPF Series featuring stainless construction with the added style of a Black Coating applied from tailpipe to tip. MagnaFlow Performance Exhaust System Kit 19693 is made of durable stainless steel and built using CNC precision robotic manufacturing techniques, all backed by MagnaFlow’s limited lifetime construction warranty and 1 year finish warranty.

• 409 Stainless Steel Construction With High Temp Satin Black Coating
• 300 Series Stainless Steel Black Coated Intercooled Tip[s]
• 300 Series Stainless Steel Black Coated Intercooled Tip
• Mandrel Bent Tubing

This Part Fits:

The MagnaFlow 2025-2026 Ram 1500 D-Fit Performance Exhaust Muffler Replacement Kit With Muffler 19686 offers enthusiasts an easy way to upgrade their 2025-2026 Ram 1500 I6-3.0L with the deep signature sound and dyno-proven performance that MagnaFlow exhaust systems are famous for. This easy-to-install solution is designed to connect (where applicable) to the stock break points of your RAM truck and replaces the restrictive factory muffler with a MagnaFlow 11” NDT (No Drone Technology) resonator while retaining the OEM piping and tailpipe. 19686 is engineered to produce Moderate exterior and Mild interior sound levels generated through its fast-flowing, mandrel bent 3” main piping. This exhaust system is produced using CNC precision robotic manufacturing and features durable 100% stainless steel construction, all backed by a limited lifetime construction warranty.

• Maintains The OEM Piping And Tailpipe
• Mandrel Bent Stainless Steel Tubing
• 409 Stainless Steel Construction

This Part Fits:

The MagnaFlow 2025-2026 Ram 1500 I6-3.0L SPEQ Series Cat-Back Performance Exhaust System 19685 brings out the personality of your Truck with our signature resonant, powerful exhaust tone and dyno-proven performance. #19685 2.5” diameter mandrel bent main piping passes through a No Drone Technology (NDT) chamber and an all-new specifically tuned performance round muffler before exiting in a dual split rear exit with 5” black coated tips. This full-size truck exhaust kit is the perfect equalizer between sound and performance. Upgrade your truck to the next level with an exhaust that has the pipes to put other trucks to shame. With this system your truck will be producing moderate exterior and mild interior sound levels while leaving other trucks feeling envious at every stoplight. Exhaust kit 19685 features a cat-back exhaust layout that replaces your trucks stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 19685 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.

• No-Drone-Technology Allows For A Quiet Cabin
• Increased Horsepower And Torque
• 100 Percent Stainless Steel
• 100% Stainless Steel

This Part Fits:

The MagnaFlow 2024-2026 Toyota Tacoma SPEQ Series Cat-Back Performance Exhaust System 19681 brings out the personality of your truck with our signature resonant, powerful engine tone and dyno-proven performance. MagnaFlow #19681 3” diameter mandrel bent main piping passes through a No Drone Technology (NDT) chamber and an all-new specifically tuned performance oval muffler before exiting in a dual same side behind driver rear tire exit with 3.50” black coated welded-on double wall angle cut folded edge tips. This MagnaFlow truck exhaust kit is the perfect equalizer between sound and performance. Elevate your truck to the next level with an exhaust that has the pipes to put other trucks to shame. With this exhaust system your truck will be producing moderate exterior and mild interior sound levels for a smooth and comfortable driving experience. Exhaust kit 19681 features a cat-back layout that replaces your truck’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit exhaust design that you can easily install yourself. 19681 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.

• No-Drone-Technology Allows For A Quiet Cabin
• Increased Horsepower And Torque
• 100 Percent Stainless Steel
• 100% Stainless Steel

This Part Fits:

The MagnaFlow 2024-2026 Toyota Tacoma SPEQ Series Cat-Back Performance Exhaust System 19680 brings out the personality of your Truck with our signature resonant, powerful exhaust tone and dyno-proven performance. #19680 3” diameter mandrel bent main piping passes through a No Drone Technology (NDT) chamber and an all-new specifically tuned performance oval muffler before exiting in a single driver side rear exit with a 4” black chrome welded-on double wall angle cut rolled edge tip. This mid-size truck exhaust kit is the perfect equalizer between sound and performance. Upgrade your truck to the next level with an exhaust that has the pipes to put other trucks to shame. With this system your truck will be producing moderate exterior and mild interior sound levels while leaving other trucks feeling envious at every stoplight. Exhaust kit 19680 features a cat-back exhaust layout that replaces your trucks stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 19680 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.

• No-Drone-Technology Allows For A Quiet Cabin
• Increased Horsepower And Torque
• 100 Percent Stainless Steel
• 100% Stainless Steel

This Part Fits:

The MagnaFlow® Toyota Land Cruiser Overland Series™ Cat-Back Performance Exhaust System #19679 is engineered for off-road function and built to explore further. This Toyota Land Cruiser exhaust system is designed for the 2024-2026 Toyota Land Cruiser equipped with the L4 2.4L engine. The high clearance exhaust design of this kit is intended to keep your truck clear of any challenging terrain or obstacles you may come across. #19679 3” diameter mandrel bent main piping passes through an all-new specifically tuned performance oval and round mufflers with No Drone Technology (NDT) before exiting in a high-clearance single driver side rear exit style. MagnaFlow® NDT utilizes passive quarter-wave noise cancellation to minimize the unwanted droning noises that can otherwise occur at highway cruising speeds. Exhaust kit #19679 utilizes a direct-fit, easy to install design that replaces your OEM exhaust system from the catalytic converter on back. This Toyota Land Cruiser cat-back performance exhaust system is made of durable, corrosion resistant stainless steel and produced using advanced CNC precision robotic manufacturing techniques, all backed by MagnaFlow®’s limited lifetime warranty.

• No-Drone-Technology Allows For A Quiet Cabin
• Dyno Proven Performance
• High clearance exit

This Part Fits:

The MagnaFlow® Toyota Tacoma Overland Series™ Cat-Back Performance Exhaust System #19678 is engineered for off-road function and built to explore further. This Toyota Tacoma exhaust system is designed for the 2024-2026 Toyota Tacoma equipped with the L4 2.4L engine option. The high clearance exhaust design of this kit is designed to keep your truck clear of any challenging terrain or obstacles you may come across. #19678 3” diameter mandrel bent main piping passes through a No Drone Technology (NDT) chamber and an all-new specifically tuned performance oval muffler before exiting in a high-clearance single driver side rear exit style. Also included is a clamp-on tailpipe sub-assembly with a single driver side rear exit and black chrome 4” tip giving you a finished look when cruising around town. MagnaFlow® NDT utilizes passive quarter-wave noise cancellation to minimize the unwanted droning noises that can otherwise occur at highway cruising speeds. Exhaust kit #19678 utilizes a direct-fit, easy to install design that replaces your OEM exhaust system from the catalytic converter on back. This Toyota Tacoma cat-back performance exhaust system is made of durable, corrosion resistant stainless steel and produced using advanced CNC precision robotic manufacturing techniques, all backed by MagnaFlow®’s limited lifetime warranty.

• No-Drone-Technology Allows For A Quiet Cabin
• Dyno Proven Performance
• High clearance exit

This Part Fits:

The MagnaFlow® Lexus GX550 Overland Series™ Cat-Back Performance Exhaust System #19677 is engineered for off-road function and built to explore further. This Lexus GX550 exhaust system is designed for the 2024-2026 Lexus GX550 equipped with the V6 3.4L engine. The high clearance exhaust design of this kit is intended to keep your SUV clear of any challenging terrain or obstacles you may come across. #19677 3” diameter mandrel bent main piping passes through an all-new specifically tuned performance oval and round mufflers with No Drone Technology (NDT) before exiting in a high-clearance single driver side rear exit style. MagnaFlow® NDT utilizes passive quarter-wave noise cancellation to minimize the unwanted droning noises that can otherwise occur at highway cruising speeds. Exhaust kit #19677 utilizes a direct-fit, easy to install design that replaces your OEM exhaust system from the catalytic converter on back. This Lexus GX550 cat-back performance exhaust system is made of durable, corrosion resistant stainless steel and produced using advanced CNC precision robotic manufacturing techniques, all backed by MagnaFlow®’s limited lifetime warranty.

• No-Drone-Technology Allows For A Quiet Cabin
• Dyno Proven Performance
• High clearance exit

This Part Fits: