The MagnaFlow 2002-2003 Ford F-150 Street Series Cat-Back Performance Exhaust System 15772 brings out the personality of your 5.4L 2002-2003 Ford F-150 with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 1 Straight-Through mufflers ending in a Dual Same Side Behind Passenger Rear Tire exit with 3.5in. Polished Welded-On Single Wall Slash Cut Cut Edge tips, this Ford F-150 exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Ford F-150's to shame. With this system your vehicle will be producing Aggressive exterior and Moderate interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15772 features a cat-back layout that replaces your ride's stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15772 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.

• Durable Corrosion-Resistant Stainless Steel Construction
• CNC Precision Robotic Manufacturing Techniques
• Dyno-proven performance

This Part Fits:

The MagnaFlow Street Series Cat-Back Performance Exhaust System 15759 brings out the personality of your Car with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.25in. main piping and 2 Straight-Through mufflers ending in a Single Straight Driver Side Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Rolled Edge tips, this Car exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Car's to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15759 features a cat-back layout that replaces your ride's stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15759 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.

• Durable Corrosion-Resistant Stainless Steel Construction
• CNC Precision Robotic Manufacturing Techniques
• Dyno-proven performance
• Dyno Proven Performance

This Part Fits:

The Street Series Stainless Performance Exhaust system delivers dyno proven power with a comfortable interior sound and performance exterior sound. MagnaFlow Performance Exhaust System Kit 15750 is made of durable stainless steel and built using CNC precision robotic manufacturing techniques, all backed by MagnaFlow’s limited lifetime warranty.

• Durable Corrosion-Resistant Stainless Steel Construction
• CNC Precision Robotic Manufacturing Techniques
• Dyno-proven performance

This Part Fits:

The MagnaFlow Touring Series Cat-Back Performance Exhaust System 15745 is the perfect partner for your 1.8L, 2.8L 1999-2005 Volkswagen to take on a grand tour or a weekend cruise thanks to the powerful, resonant exhaust note and dyno-proven performance it brings to the table. This durable, corrosion resistant stainless steel exhaust kit is engineered to conquer the miles with ease while enhancing your driving experience with Moderate exterior and Mild interior sound levels generated through its fast-flowing, mandrel bent 2.25in. main piping and 2 Straight-Through muffler that terminate in a Dual Straight Driver Side Rear exit with 3in. Polished Welded-On Double Wall Straight Cut Rolled Edge tips. 15745 features a cat-back layout design to replace your import's stock exhaust components from the catalytic converter on back. This Volkswagen exhaust system is compatible with 1999-2005 engines. The use of extensive 3D scans made during the development process has resulted in an easy-to-install, direct-fit design that fits your Volkswagen like a glove. 15745 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's limited lifetime construction warranty.

• 409 Stainless Steel Construction
• Increased Horsepower And Torque
• Mandrel bent tubing

This Part Fits:

The MagnaFlow Street Series Cat-Back Performance Exhaust System 15734 brings out the personality of your SUV with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 3.5in. main piping and 1 Straight-Through mufflers ending in a Single Passenger Side Rear exit with 4in. Polished Welded-On Single Wall Angle Cut Rolled Edge tips, this SUV exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other SUV's to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15734 features a cat-back layout that replaces your ride's stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15734 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.

• Durable Corrosion-Resistant Stainless Steel Construction
• CNC Precision Robotic Manufacturing Techniques
• Dyno-proven performance

This Part Fits:

The MagnaFlow 1999-2004 Ford Mustang Street Series Cat-Back Performance Exhaust System 15717 brings out the personality of your 3.8L, 3.9L 1999-2004 Ford Mustang with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit with 3in. Polished Clamp-On Single Wall Angle Cut Cut Edge tips, this Ford Mustang exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Ford Mustang's to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15717 features a cat-back layout that replaces your ride's stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15717 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.

• Durable Corrosion-Resistant Stainless Steel Construction
• CNC Precision Robotic Manufacturing Techniques
• Dyno-proven performance
• Dyno Proven Performance

This Part Fits:

The MagnaFlow 1990-1997 Mazda Miata Street Series Cat-Back Performance Exhaust System 15715 brings out the personality of your 1.6L, 1.8L 1990-1997 Mazda Miata with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.25in. main piping and 2 Straight-Through mufflers ending in a Single Straight Passenger Side Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Folded Edge tips, this Mazda Miata exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Mazda Miata's to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15715 features a cat-back layout that replaces your ride's stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15715 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.

• Durable Corrosion-Resistant Stainless Steel Construction
• CNC Precision Robotic Manufacturing Techniques
• Dyno-proven performance
• Dyno Proven Performance

This Part Fits:

The MagnaFlow 1994-1997 Honda Accord Street Series Cat-Back Performance Exhaust System 15686 brings out the personality of your 2.2L 1994-1997 Honda Accord with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.25in. main piping and 2 Straight-Through mufflers ending in a Single Straight Passenger Side Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Rolled Edge tips, this Honda Accord exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Honda Accord's to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15686 features a cat-back layout that replaces your ride's stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15686 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.

• Durable Corrosion-Resistant Stainless Steel Construction
• CNC Precision Robotic Manufacturing Techniques
• Dyno-proven performance
• Dyno Proven Performance

This Part Fits:

The MagnaFlow Street Series Cat-Back Performance Exhaust System 15684 brings out the personality of your Car with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 3in. main piping and 1 Straight-Through mufflers ending in a Dual Split Rear exit with 3.5in. Polished Welded-On Single Wall Angle Cut Cut Edge tips, this Car exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Car's to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15684 features a cat-back layout that replaces your ride's stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15684 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.

• Durable Corrosion-Resistant Stainless Steel Construction
• CNC Precision Robotic Manufacturing Techniques
• Dyno-proven performance
• Dyno Proven Performance

This Part Fits:

The MagnaFlow 1994-1998 Ford Mustang Competition Series Cat-Back Performance Exhaust System 15677 brings an aggressive, attention-grabbing edge to the deep resonant exhaust note we're so well known for. This exhaust kit is designed to enhance your 4.6L, 5.0L 1994-1998 Ford Mustang with dyno-proven performance made possible thanks to fast-flowing mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit with 3.5in. Polished Clamp-On Single Wall Angle Cut Cut Edge tips featuring a sporty finish. The exhaust system's cat-back layout replaces your ride's exhaust system from near the catalytic converter on back. Exhaust system 15677 is engineered to make your vehicle's engine produce Aggressive exterior and Moderate interior sound levels, befitting its competition-oriented design. 15677's direct-fit design makes installation a breeze thanks to the use of advanced 3D scanning techniques. This performance exhaust system is made of 100% durable and corrosion-resistant stainless steel and produced using CNC precision robotic manufacturing, all backed by MagnaFlow's limited lifetime warranty. Please check to ensure compliance with local noise regulations.

• Crafted From 409 Stainless Steel With All Mandrel-Bent Tubing
• Increased Horsepower And Torque
• Aggressive exterior sound

This Part Fits:

The MagnaFlow 1999-2004 Ford Mustang Street Series Cat-Back Performance Exhaust System 15671 brings out the personality of your 4.6L 1999-2004 Ford Mustang with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit with 3.5in. Polished Clamp-On Single Wall Angle Cut Cut Edge tips, this Ford Mustang exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Ford Mustang's to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15671 features a cat-back layout that replaces your ride's stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15671 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.

• Durable Corrosion-Resistant Stainless Steel Construction
• CNC Precision Robotic Manufacturing Techniques
• Dyno-proven performance
• Dyno Proven Performance

This Part Fits:

The MagnaFlow 1993-1999 Volkswagen Golf Touring Series Cat-Back Performance Exhaust System 15670 is the perfect partner for your 2.0L, 2.8L 1993-1999 Volkswagen Golf to take on a grand tour or a weekend cruise thanks to the powerful, resonant exhaust note and dyno-proven performance it brings to the table. This durable, corrosion resistant stainless steel exhaust kit is engineered to conquer the miles with ease while enhancing your driving experience with Moderate exterior and Mild interior sound levels generated through its fast-flowing, mandrel bent 2.25in. main piping and 2 Straight-Through muffler that terminate in a Dual Straight Driver Side Rear exit with 3in. Polished Welded-On Single Wall Angle Cut Rolled Edge tips. 15670 features a cat-back layout design to replace your import's stock exhaust components from the catalytic converter on back. This Volkswagen Golf exhaust system is compatible with 1993-1999 engines. The use of extensive 3D scans made during the development process has resulted in an easy-to-install, direct-fit design that fits your Volkswagen Golf like a glove. 15670 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's limited lifetime construction warranty.

• 409 Stainless Steel Construction
• Increased Horsepower And Torque
• Mandrel bent tubing

This Part Fits:

The MagnaFlow 1999-2003 Volkswagen Jetta Sport Series Cat-Back Performance Exhaust System 15669 enhances your 1.8L, 2.0L, 2.8L 1999-2003 Volkswagen Jetta with an aggressive character that is sure to help you stand out from the other Volkswagen Jetta you encounter on the street. With its 2.25in. diameter fast-flowing mandrel bent main piping that passes through 2 Straight-Through mufflers before ending in a Dual Straight Driver Side Rear exit with 3in. Polished Welded-On Single Wall Angle Cut Rolled Edge tips, this dyno-proven Volkswagen Jetta exhaust system refuses to be ignored. As such, 15669 is tuned to produce our powerful, resonant signature exhaust note at Aggressive exterior and Moderate interior sound levels, so please check to ensure compliance with local noise regulations. The system's cat-back design replaces all your import's stock exhaust components from the catalytic converter on back. Extensive 3D scanning and CNC precision robotic manufacturing techniques are used to ensure that your exhaust system fits perfectly with just a simple do-it-yourself installation process. The durable, corrosion resistant stainless steel construction of 15669 is backed by MagnaFlow's limited lifetime warranty.

• High-Performance Lightweight Design
• Dyno Proven Performance
• Dyno-proven performance
• Racing inspired sound

This Part Fits:

The MagnaFlow 1986-1991 Chevrolet Corvette Street Series Cat-Back Performance Exhaust System 15658 brings out the personality of your 5.7L 1986-1991 Chevrolet Corvette with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Quad Split Rear exit with 3.5in. Polished Welded-On Single Wall Angle Cut Rolled Edge tips, this Chevrolet Corvette exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Chevrolet Corvette's to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15658 features a cat-back layout that replaces your ride's stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15658 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.

• Durable Corrosion-Resistant Stainless Steel Construction
• CNC Precision Robotic Manufacturing Techniques
• Dyno-proven performance
• Dyno Proven Performance

This Part Fits:

The MagnaFlow 1992-2000 Honda Civic Street Series Cat-Back Performance Exhaust System 15646 brings out the personality of your 1.6L 1992-2000 Honda Civic with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.25in. main piping and 2 Straight-Through mufflers ending in a Single Straight Passenger Side Rear exit with 4in. Polished Welded-On Single Wall Straight Cut Cut Edge tips, this Honda Civic exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Honda Civic's to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15646 features a cat-back layout that replaces your ride's stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15646 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.

• Durable Corrosion-Resistant Stainless Steel Construction
• CNC Precision Robotic Manufacturing Techniques
• Dyno-proven performance
• Dyno Proven Performance

This Part Fits:

The MagnaFlow 1999-2004 Ford Mustang Street Series Cat-Back Performance Exhaust System 15644 brings out the personality of your 4.6L 1999-2004 Ford Mustang with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit with 3.5in. Polished Clamp-On Single Wall Angle Cut Cut Edge tips, this Ford Mustang exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Ford Mustang's to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15644 features a cat-back layout that replaces your ride's stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15644 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.

• Durable Corrosion-Resistant Stainless Steel Construction
• CNC Precision Robotic Manufacturing Techniques
• Dyno-proven performance
• Dyno Proven Performance

This Part Fits:

The MagnaFlow 1992-2000 Honda Civic Street Series Cat-Back Performance Exhaust System 15643 brings out the personality of your 1.5L, 1.6L 1992-2000 Honda Civic with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.25in. main piping and 2 Straight-Through mufflers ending in a Single Straight Passenger Side Rear exit with 4in. Polished Welded-On Single Wall Straight Cut Cut Edge tips, this Honda Civic exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Honda Civic's to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15643 features a cat-back layout that replaces your ride's stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15643 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.

• Durable Corrosion-Resistant Stainless Steel Construction
• CNC Precision Robotic Manufacturing Techniques
• Dyno-proven performance
• Dyno Proven Performance

This Part Fits:

The MagnaFlow 1994-1998 Ford Mustang Street Series Cat-Back Performance Exhaust System 15638 brings out the personality of your 4.6L, 5.0L 1994-1998 Ford Mustang with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit with 3.5in. Polished Clamp-On Single Wall Angle Cut Cut Edge tips, this Ford Mustang exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Ford Mustang's to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15638 features a cat-back layout that replaces your ride's stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15638 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.

• Durable Corrosion-Resistant Stainless Steel Construction
• CNC Precision Robotic Manufacturing Techniques
• Dyno-proven performance
• Dyno Proven Performance

This Part Fits:

The MagnaFlow 1986-1993 Ford Mustang Street Series Cat-Back Performance Exhaust System 15630 brings out the personality of your 5.0L 1986-1993 Ford Mustang with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit with 3in. Polished Clamp-On Single Wall Angle Cut Cut Edge tips, this Ford Mustang exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Ford Mustang's to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15630 features a cat-back layout that replaces your ride's stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15630 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.

• Durable Corrosion-Resistant Stainless Steel Construction
• CNC Precision Robotic Manufacturing Techniques
• Dyno-proven performance
• Dyno Proven Performance

This Part Fits:

The MagnaFlow 1992-1996 Chevrolet Corvette Street Series Axle-Back Performance Exhaust System 15623 brings enhanced engine sound and dyno-proven performance to your 5.7L 1992-1996 Chevrolet Corvette with a healthy helping of our deep, resonant signature exhaust note at Moderate exterior and Mild interior sound levels. Thanks to its durable, corrosion resistant stainless steel design, this Chevrolet Corvette exhaust system will handle whatever tarmac you decide to leave your mark on. This performance exhaust kit features an axle-back layout designed to replace your Chevrolet Corvette's exhaust system from near the rear axle on back. With its fast-flowing, mandrel bent 3in. main piping and 2 Straight-Through mufflers ending in a Quad Split Rear exit with 3.5in. Polished Welded-On Single Wall Angle Cut Rolled Edge tips, your ride will be sounding as awesome as it looks. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15623 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.

• Durable Corrosion-Resistant Stainless Steel Construction
• CNC Precision Robotic Manufacturing Techniques
• Dyno-proven performance
• Dyno Proven Performance

This Part Fits:

The Street Series Stainless Performance Exhaust system delivers dyno proven power with a comfortable interior sound and performance exterior sound. MagnaFlow Performance Exhaust System Kit 15620 is made of durable stainless steel and built using CNC precision robotic manufacturing techniques, all backed by MagnaFlow’s limited lifetime warranty.

• Durable Corrosion-Resistant Stainless Steel Construction
• CNC Precision Robotic Manufacturing Techniques
• Dyno-proven performance
• Dyno Proven Performance

This Part Fits:

The MagnaFlow 2010-2014 Ford F-150 Street Series Cat-Back Performance Exhaust System 15588 brings out the personality of your 6.2L 2010-2014 Ford F-150 with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 3in. main piping and 1 Straight-Through mufflers ending in a Dual Same Side Behind Passenger Rear Tire exit with 3.5in. Polished Welded-On Double Wall Angle Cut Folded Edge tips, this Ford F-150 exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Ford F-150's to shame. With this system your vehicle will be producing Aggressive exterior and Moderate interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15588 features a cat-back layout that replaces your ride's stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15588 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.

• Durable Corrosion-Resistant Stainless Steel Construction
• CNC Precision Robotic Manufacturing Techniques
• Dyno-proven performance

This Part Fits:

The MagnaFlow Performance Exhaust Tailpipe 15463 is engineered as a universal component for your truck's exhaust system and optimized for superior flow characteristics and performance. 15463 is mandrel bent, produced using advanced CNC precision robotic manufacturing techniques and features durable, corrosion resistant stainless steel construction. Professional installation is highly recommended.

• Durable Corrosion-Resistant Stainless Steel Construction
• CNC Precision Robotic Manufacturing Techniques
• Mandrel bent tubing

This Part Fits:

The MagnaFlow Performance Exhaust Tailpipe 15452 is engineered as a universal component for your truck's exhaust system and optimized for superior flow characteristics and performance. 15452 is mandrel bent, produced using advanced CNC precision robotic manufacturing techniques and features durable, corrosion resistant stainless steel construction. Professional installation is highly recommended.

• Durable Corrosion-Resistant Stainless Steel Construction
• CNC Precision Robotic Manufacturing Techniques
• Mandrel bent tubing

This Part Fits:

The MagnaFlow Turbo Downpipe 15399 is a 4in. diameter mandrel bent stainless steel pipe designed to connect near your turbocharger and i's weight-optimized with superior flow characteristics and performance. Each performance pipe is produced using precision CNC robotic manufacturing techniques and features 100% durable, corrosion resistant stainless steel construction. Professional installation is highly recommended.

• Durable Corrosion-Resistant Stainless Steel Construction
• CNC Precision Robotic Manufacturing Techniques
• Mandrel bent tubing

This Part Fits:

The MagnaFlow Performance Exhaust Diesel Turbo Downpipe 15398 is a 3in. diameter mandrel bent stainless steel pipe designed to connect near your turbocharger and is weight-optimized with superior flow characteristics and performance. Each performance pipe is produced using precision CNC robotic manufacturing techniques and features 100% durable, corrosion resistant stainless steel construction. Professional installation is highly recommended.

• Durable Corrosion-Resistant Stainless Steel Construction
• CNC Precision Robotic Manufacturing Techniques
• Mandrel bent tubing

This Part Fits:

The MagnaFlow Performance Exhaust Tailpipe 15397 is engineered as a universal component for your truck's exhaust system and optimized for superior flow characteristics and performance. 15397 is mandrel bent, produced using advanced CNC precision robotic manufacturing techniques and features durable, corrosion resistant stainless steel construction. Professional installation is highly recommended.

• Durable Corrosion-Resistant Stainless Steel Construction
• CNC Precision Robotic Manufacturing Techniques
• Mandrel bent tubing

This Part Fits:

The MagnaFlow Performance Exhaust Tailpipe 15395 is engineered as a universal component for your truck's exhaust system and optimized for superior flow characteristics and performance. 15395 is mandrel bent, produced using advanced CNC precision robotic manufacturing techniques and features durable, corrosion resistant stainless steel construction. Professional installation is highly recommended.

• Durable Corrosion-Resistant Stainless Steel Construction
• CNC Precision Robotic Manufacturing Techniques
• Mandrel bent tubing

This Part Fits:

The MagnaFlow Jeep Loop Delete 15313 is a 2in. diameter mandrel bent stainless steel pipe that i's weight-optimized with superior flow characteristics and performance. Each performance pipe is produced using precision CNC robotic manufacturing techniques and features 100% durable, corrosion resistant stainless steel construction. Professional installation is highly recommended.

• Durable Corrosion-Resistant Stainless Steel Construction
• CNC Precision Robotic Manufacturing Techniques
• Mandrel bent tubing for smoother transitions

This Part Fits:

The MagnaFlow 2014-2021 Toyota Tundra Street Series Cat-Back Performance Exhaust System 15306 brings out the personality of your 4.6L, 5.7L 2014-2021 Toyota Tundra with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 1 Straight-Through mufflers ending in a Dual Same Side Behind Passenger Rear Tire exit with 3.5in. Polished Welded-On Single Wall Angle Cut Cut Edge tips, this Toyota Tundra exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Toyota Tundra's to shame. With this system your vehicle will be producing Aggressive exterior and Moderate interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15306 features a cat-back layout that replaces your ride's stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15306 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.

• Durable Corrosion-Resistant Stainless Steel Construction
• CNC Precision Robotic Manufacturing Techniques
• Dyno-proven performance

This Part Fits: