The Injector Dynamics 1750-XDS series is engineered for high-output fuel systems where precision and consistency are mandatory. Designed with internals that are resistant to corrosion, these injectors are fully compatible with all known automotive fuels, including methanol and ethanol (E85). This matched set of two injectors provides stable flow characteristics across the entire pulse width range, ensuring reliable performance under high pressure.

• Part Number: 1750-XDS
• Nominal Flow Rate: 1750cc/min at 3.0 bar (43.5 psi)
• Length: 60mm (O-ring to O-ring)
• Upper O-Ring: 14mm (Purple Adapter)
• Lower O-Ring: 14mm
• Quantity: Set of 2

Each injector features a 60mm length to fit standard long-style fuel rail configurations. The 14mm purple top and 14mm lower O-ring provide a secure, leak-free seal in the fuel rail and intake manifold. These are ideal for forced induction applications where accurate fueling is the difference between optimal power and engine failure.

The Injector Dynamics 1750-XDS provides precise fuel delivery for high-performance applications where consistency and control are critical. As part of the XDS series, these injectors feature advanced internal geometry that improves flow stability and atomization across a wide range of pulse widths. This ensures smooth idle and predictable part-throttle behavior even in high-horsepower builds.

• Manufacturer Part Number: 1750-XDS
• Quantity: Matched Set of 2
• Injector Length: 34mm (O-ring to O-ring)
• Top O-Ring Diameter: 14mm
• Lower O-Ring Diameter: 14mm
• Engineered for compatibility with various fuel types including gasoline and E85
• Precision-matched flow rates for consistent cylinder-to-cylinder performance

These compact 34mm injectors are designed to fit specific fuel rail configurations and replace worn or underperforming OE injectors. Each set is flow-tested to ensure tight tolerances, providing tuners with the accurate data needed for optimized engine management.

Fits 1993-1995 Mazda RX-7.

The Injector Dynamics 1750-XDS series provides high-output fuel delivery with the precision required for high-performance tuning. As an evolution of the ID1700x, the 1750-XDS is designed to handle high flow rates while maintaining exceptional control at low pulse widths, ensuring stable idle and cruise behavior even on high-boost rotary engines. This makes them an ideal solution for applications requiring massive fuel volume without sacrificing driveability.

Built with all-stainless internals, these injectors are fully compatible with corrosive fuels including E85, ethanol, and methanol. The 1750-XDS is capable of operating at high fuel pressures, providing the necessary headroom for forced induction setups. Every set is precision-matched to ensure uniform cylinder-to-cylinder fueling and consistent performance across the entire operating range.

• Flow Rate: 1750cc/min
• Set of 2 matched injectors
• Corrosion-resistant stainless steel internals
• Full compatibility with E85, methanol, and pump gasoline
• High-pressure capability for forced induction applications
• Manufacturer Part Number: 1750-XDS

Upgrade your high-horsepower fuel system with the Injector Dynamics 2600-XDS series. As the largest injector in the ID line, the 2600-XDS is engineered for extreme fuel demands, offering exceptional flow rates while maintaining the low-pulse-width stability required for consistent idling and drivability. This set is ideal for methanol-fueled applications or high-boost E85 builds where volume is critical.

Constructed with corrosion-resistant internals, these injectors are compatible with all known automotive fuels. The XDS technology ensures a wider dynamic range, bridging the gap between massive peak flow and fine-tuned low-end control. These units feature a 60mm length and 14mm adapters to fit standard fuel rail and manifold configurations.

• Series: 2600-XDS
• Length: 60mm
• Inlet Adapter: 14mm Purple Top
• Outlet: 14mm Lower O-Ring
• Quantity: Set of 2
• Manufacturer Part Number: 2600.60.14.14.2
• Fuel Compatibility: All known automotive fuels (Gasoline, Ethanol, Methanol)

The Injector Dynamics 2600-XDS is the highest-flowing injector in the ID lineup, engineered to provide reliable and precise fuel delivery for high-performance engines. Developed specifically for use with gasoline, ethanol, and methanol, these injectors utilize advanced internal components to deliver exceptional low-pulse-width linearity and consistent flow rates across all injectors in the set.

This pair features a compact 34mm body length and 14mm O-rings on both the top and bottom, ensuring a secure fit in specific aftermarket fuel rail and manifold configurations. They are designed to meet the demands of forced induction and extreme naturally aspirated builds requiring high fuel volume and absolute spray precision.

• Manufacturer Part Number: 2600.34.14.14.2
• Product Series: 2600-XDS
• Body Length: 34mm
• Upper O-Ring Diameter: 14mm
• Lower O-Ring Diameter: 14mm
• Quantity: Set of 2
• Fuel Compatibility: Gasoline, Ethanol, and Methanol

Fits 1979-1986 Mazda RX-7.

This set of two Injector Dynamics 2600-XDS fuel injectors is engineered for high-output applications requiring precise fuel metering and exceptional flow capacity. The XDS series represents the pinnacle of large-flow injector technology, providing the stable idle and consistent low-pulse-width performance necessary for street-driven or track-focused rotary engines. Built to withstand the demands of modern fuels, these injectors are fully compatible with gasoline and high-ethanol blends.

This specific kit is configured for the early RX-7 fuel rail, featuring 14mm top adapters and -204 / 14mm lower O-rings to ensure a leak-free seal and direct fitment. Whether you are upgrading your primary or secondary rail, these injectors deliver the linearity and atomization required for forced induction or high-performance naturally aspirated builds.

• Manufacturer Part Number: 2600.11.06.60.14.2
• Series: 2600-XDS
• Top Adapter: 14mm
• Lower O-Ring: -204 / 14mm
• Quantity: Set of 2 Injectors
• Compatibility: Compatible with all known fuels including E85

This set of two Injector Dynamics fuel injectors provides a nominal flow rate of 1340cc/min, engineered for high-output applications requiring precise fuel metering and superior atomization. These high-impedance injectors feature a 60mm length and 14mm purple tops, designed to offer stable performance even at low pulse widths for consistent idle and drivability.

• Flow Rate: 1340cc/min
• Length: 60mm (O-ring to O-ring)
• Top O-Ring: 14mm (Purple Top)
• Lower O-Ring: 14mm
• Quantity: Set of 2
• Manufacturer Part Number: 1300.60.14.14.2

Constructed for compatibility with various fuel types, including gasoline and ethanol, these injectors replace restrictive factory units to support increased power demands. The 14mm lower O-ring ensures a proper seal in compatible fuel rail and manifold bores.

This set of two Injector Dynamics 1300cc fuel injectors is engineered for high-output applications requiring precise fuel metering and exceptional atomization. With a 48mm length and 14mm O-rings on both the top and lower seats, these injectors provide a secure fit in compatible high-performance fuel rails and intake manifolds. Each injector is manufactured to provide linear flow and consistent performance across the pulse width range, making them an essential upgrade for forced induction or high-compression builds.

• Flow Rate: 1300cc/min
• Length: 48mm
• Top O-Ring Diameter: 14mm
• Lower O-Ring Diameter: 14mm
• Quantity: Set of 2
• Manufacturer Part Number: 1300.48.14.14.2

This set of two Injector Dynamics ID1300 fuel injectors is engineered for precise fuel delivery in high-performance applications. These injectors are designed to provide consistent flow rates and atomization, featuring a compact 34mm length and 14mm O-rings for both the top and lower seats. Equipped with a USCAR electrical connector, they integrate seamlessly with compatible wiring harnesses for a secure, moisture-resistant connection.

• Manufacturer Part Number: 1300.34.14.14.2
• Series: ID1300
• Connector Type: USCAR
• Overall Length: 34mm
• Top O-Ring Diameter: 14mm
• Lower O-Ring Diameter: 14mm
• Quantity: Set of 2

Fits 1993-1995 Mazda RX-7.

The Injector Dynamics ID1300 is an all-fuel compatible injector specifically designed to handle the corrosive nature of ethanol and methanol while maintaining excellent performance with standard gasoline. These 1300cc/min injectors provide a significant fuel delivery upgrade for high-output rotary engines, ensuring stable idle and precise fuel metering at high duty cycles.

• Nominal Flow Rate: 1300cc/min @ 3.0 Bar (43.5 psi)
• Construction: Stainless steel internals for full compatibility with E85, Ethanol, and Methanol
• Fitment: 14mm purple adapters for correct seating and sealing
• Matching: Dynamically flow-matched set for consistent cylinder-to-cylinder performance
• Manufacturer Part Number: 1300.11.06.60.14.2

This set includes two injectors designed for drop-in installation on the FD3S platform, providing the necessary headroom for increased boost levels and alternative fuel conversions without sacrificing low-end drivability.

The Injector Dynamics ID1050X is the evolution of the industry-standard ID1000, engineered for high-performance applications that demand precise fuel metering and maximum reliability. These injectors feature all-stainless internals, making them fully compatible with alternative fuels including E85. Designed to provide a consistent flow rate across a wide range of pulse widths, the ID1050X is the go-to choice for tuners seeking stability and performance.

• Part Number: 1050.60.14.14.2
• Flow Rate: 1065cc/min at 3.0 Bar (43.5 psi) using gasoline at 52 degrees C (125 degrees F)
• Nominal Length: 60mm (O-ring to O-ring)
• Top O-Ring: 14mm (Purple Top)
• Lower O-Ring: 14mm
• Construction: Corrosion-resistant stainless steel internals for E85 compatibility
• Circuit Type: High Impedance
• Included: Set of 2 matched injectors

Ensure precise fuel delivery with this set of two Injector Dynamics ID1050X fuel injectors. As an evolution of the industry-standard ID1000, the ID1050X series is engineered for high-performance applications, featuring corrosion-resistant internals that make it compatible with all known automotive fuels, including E85. This configuration is specifically equipped with 11mm blue top adaptors and Denso-style lower cushions to facilitate a secure, leak-free installation in matching fuel rail and intake manifold setups.

These injectors are built to provide superior atomization and consistent flow rates, crucial for maintaining optimal engine performance under varying loads. By utilizing the included hardware, you ensure proper fitment and sealing without the need for custom fabrication.

• Manufacturer Part Number: 1050.60.11.D.2
• Series: ID1050X
• Quantity: Set of 2
• Adaptors: 11mm Blue Top Adaptors
• Lower Seals: Denso Lower Cushions
• Fuel Compatibility: Compatible with all known automotive fuels

The Injector Dynamics ID1050cc fuel injectors are engineered to provide precise fuel delivery and exceptional idle stability for high-performance engines. This set provides a nominal flow rate of 1050cc/min, maintaining a linear response even at very low pulse widths. This characteristic allows for easier tuning and smoother drivability compared to traditional high-flow injectors.

This specific configuration is built for 48mm length requirements, featuring a grey 14mm top adapter and a 14mm lower o-ring to ensure a proper seal in the fuel rail and intake manifold. Each unit is rigorously tested to ensure tight flow matching, providing consistent performance across all cylinders.

• Brand: Injector Dynamics
• Series: ID1050cc
• MPN: 1050.48.14.14.2
• Length: 48mm
• Top Adapter: 14mm (Grey)
• Lower O-Ring: 14mm
• Quantity: Set of 2

Upgrade your fuel system with the Injector Dynamics ID1050X series, a high-performance injector designed for extreme precision and reliability. These injectors are engineered to provide consistent fuel delivery and superior atomization, ensuring optimal engine performance and idle stability even in demanding applications.

This set of two injectors features a compact 34mm length and 14mm O-rings at both the top and bottom, providing a secure fit for compatible fuel rails and intake manifolds. Built to satisfy the requirements of high-output builds, the ID1050X series is the result of extensive testing to ensure matched flow rates across the set.

• Manufacturer Part Number: 1050.34.14.14.2
• Quantity: Set of 2
• Length: 34mm (O-ring to O-ring)
• Top O-Ring: 14mm
• Lower O-Ring: 14mm
• Series: ID1050X

Upgrade your fuel system with the Injector Dynamics ID1050X, a high-performance injector engineered to provide exceptional idle and cruise behavior while delivering the high flow rates required for forced induction and modified engines. This set of two injectors is built as a dedicated performance component, rather than a modified production part, ensuring superior consistency and durability.

These injectors feature 14mm purple adaptors (-204) and 14mm lower o-rings for secure sealing and precise fitment. The internal geometry is designed to resist corrosion from ethanol-based fuels like E85, while the robust solenoid design ensures reliable operation even at elevated fuel pressures. Each injector in this set is strictly matched by flow rate and offset for balanced cylinder-to-cylinder performance.

• Manufacturer Part Number: 1050.11.06.60.14.2
• Set Type: Set of 2 Injectors
• Adaptor Size: 14mm (Purple) -204
• Lower O-Ring Size: 14mm
• Compatibility: Corrosion-resistant internals for all known fuels including E85
• Design: All-new internal flow geometry for improved atomization

The Injector Dynamics ID1050X is a high-performance fuel injector designed as the evolution of the industry-standard ID1000. This set includes two injectors configured with 11mm blue top adaptors and 14mm lower O-rings for precise fitment into specific fuel rail and manifold applications. Built with corrosion-resistant internals, these injectors are compatible with all known fuels, including E85 and high-ethanol blends.

• Manufacturer Part Number: 1050.11.03.60.11.2
• Series: ID1050X (X-Series)
• Adaptor Size: 11mm (Blue)
• Lower O-Ring Size: 14mm
• Quantity: Set of 2 Injectors
• Internal Material: Corrosion-resistant stainless steel internals for long-term reliability

Each injector is flow-matched to provide exceptional cylinder-to-cylinder consistency, ensuring optimal idle quality and tuning stability under high-boost or high-demand conditions. These injectors replace worn or undersized OE units to support increased horsepower requirements while maintaining precise fuel control.