This 14 foot/4.3 meter wiring harness is designed to connect a pair of D-Series LED lights to your 12V electrical system. It features battery terminals on one end and Deutsch connectors on the other to connect to the lights. It incorporates an inline fuse holder, and a waterproof switch. This harness is compatible with the following RIGID LED Lights: D-Series PRO Pair and SR-Q Series PRO Pair Spot, Flood or Flood Diffused Optics.

• Designed And Engineered By Rigid

This 11 foot/3.35 meter wiring harness is designed to connect a single LED light to your 12V electrical system. It features battery terminals on one end and a Deutsch connector on the other to connect to the light. It incorporates an inline fuse holder, and a waterproof switch. This harness is compatible with the following RIGID LED Lights: D-Series single, 4 in. E-Series, 6 in. E-Series PRO, 6 in. SR-Series, 10 in. SR-Series, Q-Series single, D-XL Series single, SR-M Series single, SR-Q Series single.

• Designed And Engineered By Rigid

This 11 foot/3.35 meter wiring harness is designed to connect a single LED light bar to your 12V electrical system. It features battery terminals on one end and a Deutsch connector on the other to connect to the light. It incorporates an inline fuse holder, a 12V relay, and a waterproof switch. This harness is compatible with the following RIGID LED Lights: 20 in.-50 in. SR-Series PRO and 10 in.-30 in. E-Series PRO Light Bars.

• Designed And Engineered By Rigid

This 33 Foot/10 meter harness for your RIGID LED Lights has an easy to use three position switch: On/Off/Auto when in reverse and is used for SR-M and SR-Q Series Back Up Kits.

• Designed And Engineered By Rigid

This RIGID switch features a lighted rocker with protective rubber boot and is a great addition to any RIGID lighting system. This switch will fit all RIGID wiring harnesses. This product requires a 3/4 inch hole to mount.

• LED On/Off Indicator Light
• Water And Dust Resistant

This 13 foot/4 meter wiring harness is designed to connect a single LED light bar to your 12V electrical system. It features battery terminals on one end and a Deutsch connector on the other to connect to the light. It incorporates an inline fuse holder, a 12V relay, and a waterproof switch. This harness is compatible with the following RIGID LED Lights: 40 in.-50 in. E-Series PRO, 20 in.-54 in. RDS-Series PRO.

• Designed And Engineered By Rigid

This three position switch features a lighted cherry rocker with a protective rubber boot and is a great addition to any RIGID lighting system. This RIGID switch allows for on, off, or auto when the vehicle is in reverse. This product requires a 3/4 in. hole to mount.

• Requires 3/4 Inch Hole
• Allows For On/Off/Auto
• LED On/Off Indicator

Use RIGIDs Pendant Switch Kit if you don't want to drill a hole in your vehicle to mount a switch. This Kit works great for powersports applications. Ultra-durable, waterproof, dust-proof and impact resistant. LED on/off indicator light. Kit includes switch, 3M VHB mounting tape and radius mount pad for bar mounting.

• LED On/Off Indicator Light
• Water And Dust Resistant
• Impact Resistant
• Ultra-Durable

The all-new ORACLE Lighting BC2 ColorSHIFT® controller is our latest Bluetooth LED control option utilizing the new ORACLE ColorSHIFT® PRO Smartphone App. The perfect controller for adding ORACLE's vast line of RGB ColorSHIFT® products to your vehicle, simply connect power and ground then connect your smartphone through the free app to control your lights! The controller features a total of 6 outputs with waterproof connections for easy wiring to your ColorSHIFT® lighting products. Through the new ORACLE ColorSHIFT® PRO App you can turn your lights on and off, select from dozens of color variations, illumination patterns, control the device brightness, adjust pattern speed, and even control the lights with sound or music. Installation is easy with pre-installed ring terminals for Power and Ground. Simply connect to your vehicle's battery Positive and Negative terminals and turn on the light from your phone with the ORACLE ColorSHIFT® PRO App! The pre-installed inline fuse keeps the current under control without the need to add your own circuit protection

• In the Box: (1) BC2 Bluetooth ColorSHIFT® RGB LED Controller, (1) RF Wireless Controller, (6) Accessory Plugs with Waterproof Connections, (6) Waterproof End Caps for Unused Plu
• Note: Controller can be mounted inside or outside of the vehicle's cabin.
• Operation: Ground-Switched RGB
• Weatherproof Rating: IP67
• Max Current Output: 10A
• Input Voltage: 12VDC
• 2 Year Warranty

Connect into the 7-Pin wiring harness with the Plug-&-Play adapter which provides both Reverse light outputs and 4 Pin output. The Reverse light outputs can be used to seamlessly add the ORACLE Lighting Rear Bumper LED Reverse Lights for Jeep Gladiator JT (ORACLE Part# 5878-504) or other LED Auxiliary lights you wish to connect to the reverse lights without tapping into the factory wiring. The 4-Pin connector can be used for concealing the connection for the ORACLE Lighting Racetrack Flush Style LED Tailgate Panel Light (ORACLE Part# 5918-504) or other accessory that connects to a 4 pin trailer plug connection.

• No cutting or splicing.

This Part Fits:

Split the output of your Jeep Wrangler JK front grill Turn Signal/ Parking Light circuit. Connects to the vehicle-side plug and splits into 2 separate outputs for installation of additional device. All connections are plug and play for easy installation (Sold Individually)

• Sold Individually

This Part Fits:

ORACLE Lighting 2 Pin 6' Extension Cable for Single Color Illuminated Wheel Rings & Rock Lights

• Works with both 4 module and 8 module kits

Easily connect H4 LED Headlights to the 2018-2021 Jeep Wrangler JL headlamp connector with these adapters.

• Plug and Play design

This Part Fits:

Each LED emitter can be independently adjusted in order to put a focused beam of light on the road without blinding oncoming traffic, this is especially important for lifted Wranglers/Gladiators. The separate driving and Low Beam lights allow for proper light distribution for optimal road legal light coverage by utilizing precise LED optics for advanced light control.The Vector™ Series Grill features an impressive 5,600 Combined Lumen (Raw Lumens) Low Beam with advanced optics for precision lighting that illuminates the road for increased driver visibility without creating glare that can blind oncoming traffic. 7,200 Combined Lumen High Beam for illuminating any dark landscape. The headlight wiring connection is "Plug and Play" thanks to the included harness adapter which plugs into the factory socket. The DRL module is wired into the vehicle's fuse box with the included fused wiring adapter. Installation takes 1-2 hours for most beginners and requires only basic tools for DIY installation.Additional features of the ORACLE Lighting Vector Series Grill include an integrated LED Daytime Running Light (DRL) which increases driver safety by making the Wrangler more visible to other drivers on the road. This DRL also features a unique "startup sequence" Dynamic LED display. The components of the Vector Grill were CAD-developed to ensure that the fit and finish of this product matches factory quality and fitment. The ORACLE Vector™ Series Grill was designed in the USA and has been granted USPTO design patents and has other patents pending in the US and countries abroad.

• Advanced Optics Design for Optimal Visibility
• Precision Beam "No Glare" output design
• Horizontal and Vertical Adjust-ability
• Over 200 Individual High Output LEDs
• Eye-Catching Daytime Running Light
• Fully Equipped w/ LED Components
• Dynamic LED Startup Sequence

This Part Fits:

The ORACLE Lighting Vector Series Grill for the Jeep Wrangler JK is the first full-featured replacement grill with integrated LED light emitters for Low Beam, High Beam, as well as a Dynamic LED DRL. This unique design is equipped with an array of application-specific LED lighting features and has the aggressive styling and rugged durability that Jeep owners demand. These modules are now robotic-ally sealed to create an Ingress Protection Rating of IP68 which will keep moisture out of your fixtures even from exposure to pressurized water spray and brief underwater submersion. The DRL modules are now mounted with hardware rather than adhesive to make these parts easier to remove for grill painting and maintenance. Each LED beam can be independently adjusted in order to put light on the road without blinding oncoming traffic, especially important for lifted Wranglers. The separate driving and Low Beam lights allow for proper light distribution for optimal road legal light. The Vector Series Grill features an impressive 5,600 Combined Lumen Low Beam with advanced optics for precision lighting that illuminates the road for increased driver visibility without creating glare that can blind oncoming traffic. 7,200 Combined Lumen High Beam for illuminating any dark landscape. The simple wiring connection is "Plug and Play" thanks to the included harness adapter. Additional features of the ORACLE Lighting Vector Series Grill include an integrated LED Daytime Running Light which increases driver safety. This DRL also features a unique "startup sequence" Dynamic LED display. Another safety feature is the LED Turn Signal that is 4x brighter than the factory turn signal lamp. The components of this project were CAD developed to insure that the fit and finish of this product matches factory quality and fitment.

• Precision Beam "No Glare" output design

This Part Fits:

Extend the cables for your ORACLE Lighting ColorSHIFT(tm) Underbody Wheel Well Rock Light Kits!

• Weather Insulated

Easily remove your LED Whip with this LED Whip Quick Disconnect Attachment. The red wire is your + power, the attachment is self grounding.

• Easily remove your LED whip

Our new Off-Road LED ColorSHIFT(tm) Whips deliver outstanding color brilliance and illumination! These whips are easy to install and can be used as safety or warning devices for ATV, UTV and Off-Road vehicles. Each Off-Road LED Whip utilizes High Quality Poly-carbonate tubing for an increased resistance level and flexibility. Now control colors, speed, brightness, and functions all from the included RF Wireless Remote!

• Weather and Shock Resistant

Extend the cables for your ORACLE Lighting ColorSHIFT(tm) Illuminated Wheel Rings

• Weather Insulated

This pair of adapters seamlessly converts 9005/9006 connectors to 5202/PSX24W, ensuring a perfect fit. Simplify your installation process and enhance your lighting performance with these reliable and durable adapters.

• AKA 5202/H16/2504 male socket to H10/9006/9005 female plug.

This 50W/6 ohm LED load equalizer is a must if you do not want to get a "rapid flash" when installing LED turn signal bulbs. The "rapid-flash" occurs because the high-efficiency LED bulb does not draw enough power for the vehicle to recognize it and assumes the bulb is missing. It causes the turn signal to blink rapidly to notify you there is something odd. Installation is simple, just connect the Load Equalizer to the positive and negative wires going to the turn signal bulb. This part is required wherever LED Signals have been used to replace normal incandescent or halogen bulbs. Most cars and motorcycles monitor the resistance in the turn signal circuit and will increase the flash rate when it senses too little resistance. The system was designed this way so the driver will know when a bulb has burnt out but it will also flash faster if LEDs are installed since they have almost no load (resistance). This unit will increase the load presented to the system so it will use the proper flash rate. This Load Equalizer is encased in a waterproof aluminum housing complete with heat sink fins to dissipate heat and operate at a safe temperature.

• Eliminates the "rapid flash" when installing LED turn signal bulbs

Unimpressed with the dim white light in the dash of your new RAM truck or looking for an easy way to add unique style to the vehicle's interior? With the new ORACLE Lighting Interior Ambient Lighting ColorSHIFT(tm) RGB Kit for the 5th Gen RAM, you can turn the stock dash light into a vivid color accent! This kit is the perfect way to accent your interior cleanly and seamlessly. With an easy-to-use smartphone app, control your new RAM RGB dash lights to be any color imaginable for a style that's all your own. Our RAM ambient lighting dash kit uses ColorSHIFT(tm) RGB circuit boards that replace the existing circuit boards in the dash. Easily connect to our included RGB Bluetooth controller via plug-and-play connections. Connect the controller to the cigarette lighter adapter in the dash using the included connectors, and you can control the lights using the free app on your smartphone. Using the app, you have full control of the hundreds of colors, patterns, and brightness levels. Our cutting-edge RGB interior ambient lighting kit for 5th Gen RAMs is a great way to personalize your ride with show-stopping looks and industry-leading performance. Stand out with new, modern LED styling with ORACLE Lighting!

• Package includes: (3) ColorSHIFT(tm) RGB Circuit Boards(1) ColorSHIFT(tm) Bluetooth LED Controller Connectors and Controller User Guide

This Part Fits:

ORACLE Lighting's new Fiber Optic Interior Kits are the perfect way to accent your vehicle's dull interior in a clean and seamless way. The special side-firing fiber optic cables have an integrated edge to make installation easy on any vehicle. Using the included installation tool, insert the integrated edge between interior body panels in your vehicle including door panels, dashboard, headliner, console, and more. The power cord adapter has a switch to turn ON and OFF the lights conveniently. This is a universal product and while this is simple in most cases it is important to understand each vehicle is different and may need some installation experience to pull off the perfect install, so we recommend professional installation. How It Works: The fiber optic is end lit by a LED light head. We recommend for any length over 3' you end-light both ends of the cable for the best and brightest look. The light travels through the fiber and lights up smoothly along the way for a very clean and understated appearance. The integrated edge is designed to hold the fiber optic cable tightly without the use of any adhesive. Our ColorSHIFT(tm) option comes with a remote that allows you to select the exact color you want to use, adjust the brightness, and even do different effects like pulse, strobe, and smooth color transitions. You can also control your fiber optic interior kit using the free app called "LED LAMP." Available for Android and IOS.

• Life: 50,000 Hours

ORACLE Lighting's new Fiber Optic Interior Kits are the perfect way to accent your vehicle's dull interior in a clean and seamless way. The special side-firing fiber optic cables have an integrated edge to make installation easy on any vehicle. Using the included installation tool, insert the integrated edge between interior body panels in your vehicle including door panels, dashboard, headliner, console, and more. The power cord adapter has a switch to turn ON and OFF the lights conveniently. This is a universal product and while this is simple in most cases it is important to understand each vehicle is different and may need some installation experience to pull off the perfect install, so we recommend professional installation. How It Works: The fiber optic is end lit by a LED light head. We recommend for any length over 3' you end-light both ends of the cable for the best and brightest look. The light travels through the fiber and lights up smoothly along the way for a very clean and understated appearance. The integrated edge is designed to hold the fiber optic cable tightly without the use of any adhesive. Our ColorSHIFT(tm) option comes with a remote that allows you to select the exact color you want to use, adjust the brightness, and even do different effects like pulse, strobe, and smooth color transitions. You can also control your fiber optic interior kit using the free app called "LED LAMP." Available for Android and IOS.

• Life: 50,000 Hours

Customize your vehicle with a vibrant new look with universal LED letter badges from ORACLE Lighting! These individual LED illuminated letters for cars are the perfect way to make your own marquee-style glowing vehicle badge. When turned on, the letters emit a soft edge-lit glow to make your custom badge stand out. Even when off, the sleek design of the letter housings gives a customized high-end appearance. The premium construction and overall styling deliver great value for an easy DIY illuminated badge. Simply choose the letters you need, and get ready to draw attention to your ride with a build-your-own glowing letter design!

• Matte Black Surface Finish

Customize your vehicle with a vibrant new look with universal LED letter badges from ORACLE Lighting! These individual LED illuminated letters for cars are the perfect way to make your own marquee-style glowing vehicle badge. When turned on, the letters emit a soft edge-lit glow to make your custom badge stand out. Even when off, the sleek design of the letter housings gives a customized high-end appearance. The premium construction and overall styling deliver great value for an easy DIY illuminated badge. Simply choose the letters you need, and get ready to draw attention to your ride with a build-your-own glowing letter design!

• Size: Approx. 3.75 in. x 1.4 in.

Customize your vehicle with a vibrant new look with universal LED letter badges from ORACLE Lighting! These individual LED illuminated letters for cars are the perfect way to make your own marquee-style glowing vehicle badge. When turned on, the letters emit a soft edge-lit glow to make your custom badge stand out. Even when off, the sleek design of the letter housings gives a customized high-end appearance. The premium construction and overall styling deliver great value for an easy DIY illuminated badge. Simply choose the letters you need, and get ready to draw attention to your ride with a build-your-own glowing letter design!

• Matte Black Surface Finish

Customize your vehicle with a vibrant new look with universal LED letter badges from ORACLE Lighting! These individual LED illuminated letters for cars are the perfect way to make your own marquee-style glowing vehicle badge. When turned on, the letters emit a soft edge-lit glow to make your custom badge stand out. Even when off, the sleek design of the letter housings gives a customized high-end appearance. The premium construction and overall styling deliver great value for an easy DIY illuminated badge. Simply choose the letters you need, and get ready to draw attention to your ride with a build-your-own glowing letter design!

• Size: Approx. 3.75 in. x 1.4 in.

Customize your vehicle with a vibrant new look with universal LED letter badges from ORACLE Lighting! These individual LED illuminated letters for cars are the perfect way to make your own marquee-style glowing vehicle badge. When turned on, the letters emit a soft edge-lit glow to make your custom badge stand out. Even when off, the sleek design of the letter housings gives a customized high-end appearance. The premium construction and overall styling deliver great value for an easy DIY illuminated badge. Simply choose the letters you need, and get ready to draw attention to your ride with a build-your-own glowing letter design!

• Matte Black Surface Finish

Customize your vehicle with a vibrant new look with universal LED letter badges from ORACLE Lighting! These individual LED illuminated letters for cars are the perfect way to make your own marquee-style glowing vehicle badge. When turned on, the letters emit a soft edge-lit glow to make your custom badge stand out. Even when off, the sleek design of the letter housings gives a customized high-end appearance. The premium construction and overall styling deliver great value for an easy DIY illuminated badge. Simply choose the letters you need, and get ready to draw attention to your ride with a build-your-own glowing letter design!

• Size: Approx. 3.75 in. x 1.4 in.