Stay safer, see further, and brighten your night time driving experience with our All Lights On device. The All Lights On allows your high-beams, low-beams, and fog lamps to all be on simultaneously to illuminate the roadway when your high beams are activated. When your high beams are not on, your low-beams and fog lamps will operate normally. All Lights On will fit the following range of vehicles and models equipped with fog lights: 2015 - 2021 Chevrolet Colorado and GMC Canyon 2007.5 - 2021 Chevrolet Silverado & GMC Sierra 1500 2007.5 - 2023 Chevrolet Silverado & GMC Sierra 2500HD/3500HD 2007 - 2020 Chevrolet Tahoe & Suburban 2007 - 2020 GMC Yukon & Yukon XL 2007 - 2014 Cadillac Escalade 2007 - 2013 Chevrolet Avalanche 2008 - 2017 Buick Enclave 2009 - 2017 Chevrolet Traverse 2010 - 2017 GMC Terrain 2007 - 2010 Saturn Outlook 2010 - 2019 GM Equinox 2013 - 2016 Chevrolet Trax 2008 - 2013 Chevrolet Impala 2016 - 2019 Buick Envision

This Part Fits:

Overview Upgrade your vehicles setup with the Diode Dynamics D-Switch! This advanced 8-channel switch panel gives you full control over any 12V accessory with four 30A and four 15A outputs, delivering serious power with unrivaled customization. Dedicated Backlight Channel. Unlike other 8-button controllers, the D-Switch includes a 9th button for the dedicated backlight bus bar, providing eight extra outputs for accent lighting. Activate all backlit accessories with a single press, freeing up main outputs for other functions. Dynamic Channel Assignment. Unlike one-to-one switch panels, the D-Switch allows multiple output channels per button, giving you complete control over your setup. You can also assign multiple functions of an output to different buttons, such as configuring one button for flashing and another for full power of the same light. Fast, Responsive Bluetooth App. Control and configure settings using the Bluetooth app for iOS and Android, which delivers instant response, no lag, and seamless programming. OEM Signal Integration. Three trigger wires are included to automatically activate your outputs with vehicle signals such as high beams, fog lights, or reverse lights. The ignition wire powers the controller when the vehicle starts, shutting it down automatically when turned off. The Night Mode wire adjusts output settings and controller brightness for low-light conditions. Solid-State, Durable Design. The D-Switch is built to withstand the toughest conditions, with a solid-state design and an IP67-rated aluminum heatsink for superior heat dissipation. No mechanical relays to wear out or physical fuses to replace! Whether for off-road lighting or other 12V accessories, the D-Switch offers unmatched power, customization, and reliability.

• Three trigger wires for OEM-like control through vehicle signals.
• Fast responsive Bluetooth App - no lagging or loading screens!
• Solid-state fully-encapsulated design for extreme durability.
• Dedicated backlight channel to control your accent lighting.
• Group and control multiple outputs with a single button.

OverviewUpgrade the style and function of your vehicle with our C2R 4th Brake Light Kit! This kit replaces the blank trim panel found on many USDM Subaru rear bumpers with our C2R LED Pod. Featuring 3-in-1 functionality the C2R provides a powerful reverse light a 4th brake light with an optional F1-style flash pattern and an additional red running light adding a distinctive touch while maintaining an OEM appearance.F1-style 4th Brake Light. The C2R features a high-power red function to serve as a powerful 4th brake light. The high-power red functionality activates anytime you apply your brakes adding a 4th brake light to your vehicle.The C2R also features optional F1-style SafetyStrobe brake light which can be activated in 15-second intervals. By default the C2R will flash three times when the brake lights are initially applied giving you a unique look on the road. The F1-style SafetyStrobe can be disabled if desired.Brighter Backup. Powered by automotive-grade high-intensity LEDs and our custom-engineered TIR optics the C2R delivers a dramatic increase in brightness providing significantly more light when backing up at night.Additional Running Light. The C2R features a red backlight that functions as an additional running light. Unlike small indicator LEDs found in other products the backlight fully illuminates the TIR optic for a unique modern appearance.OE-Style Fitment. Each kit includes a custom-molded bracket designed specifically for your vehicle allowing the C2R to mount flush into the bumper’s center opening. Originally intended for international fog lamps this location provides a low-profile central mounting point that looks right at home on your vehicle. The final result is a clean OEM-style appearance.

• Adds a powerful reverse light 4th brake light and additional running light
• Custom-engineered TIR optics for industry-leading output
• Simple installation with plug-and-play wiring harness
• OEM-grade construction with aluminum housing
• Includes optional F1-style flash pattern

This Part Fits:

Features Allows for installation of an SSC1 LED pod into the trailer hitch. Provides high-power reverse light, and red accent light. Simple 5-minute installation, with no need for custom wiring or routing wires. Designed and assembled in USA. Overview. Add significantly more light output when backing up at night with our HitchMount Reverse Light Kit compatible with Ford, Maverick 2022-2024! This kit allows you to mount one SSC1 LED pod in your 2-inch or 2.5-inch trailer hitch receiver, adding a high-power reverse light and additional running light. With the included wiring harness, this kit connects to your vehicle's factory connectors under the bumper. Brighter Backlight. Factory reverse bulbs just don't provide enough light output to back up at night confidently. By pairing our patented TIR optics with high-powered LEDs, the SSC1 LED pod included in this kit provides an additional reverse light that's several times brighter than stock bulbs alone. Plus, they automatically come on when the vehicle is put in reverse! Simple Installation. The patent-pending snap-fit design allows you to install this mount in minutes, without any drilling or need for a hitch pin. Simply insert the HitchMount into your trailer hitch receiver and the snap-fit side mounts will snap into place. Installation couldn't be easier and takes less than five minutes! Focused. Traditional optics like reflectors or simple lenses lose light internally and to glare, so not all of the light shines on target. Instead, the custom-engineered TIR optic in our Stage Series pods collects all of the light from the LED, and directs it only where you need it, drastically reducing glare and improving total efficiency.

• Allows you to mount an SSC1 LED pod in the Ford Maverick trailer hitch receiver
• Adds reverse light and additional running light
• Designed and assembled in USA
• Simple 5-minute installation

This Part Fits:

Features Allows you to mount eight rock lights under your vehicle. Convenient center-mount or magnet mount installation. Available in single-color or multicolor output. Includes all necessary wiring and mounting hardware. Aluminum heatsink with signature Ico Bezel shape. Thick, durable lenses, engineered to spread light. Engineered and Assembled in USA. Overview Looking to light up the trail at night? Look no further. Introducing the Stage Series LED Rock Light Installer Kit! Designed for superior durability and maximum performance, Stage Series LED Rock Lights have set a new standard in the offroad category. This kit includes all the wiring and hardware necessary to mount eight Stage Series LED rock lights, making it easier than ever to add rock lights to your vehicle. Single-Color or RGBW. The Stage Series Rock Lights in this kit are available in a single-color or multicolor output. Our single-color Stage Series Rock Lights provide a peak output of 800 lumens, with a true power draw of over 10 watts, illuminating in a 5700K color temperature. Our RGBW LED Rock Lights provide plenty of output in any color you can think of. Thanks to the independent white chip, these RGBW LED rock lights will also light up in a bright, pure white color when you want to maximize output. Mount it Your Way. Our Rock Light Installer Kit can be mounted using the center bolt mounting point that is neatly hidden underneath the lens and comes standard, or you can select the magnet mount option. Our magnet mounts feature an overmolded design that keeps your rock light secure using the integrated mounting hole. With N42 magnets providing an approximate pull/holding force of 35lbs, you can rest assured that the magnet won't go anywhere!

• Interchangeable durable lenses for quick color swap
• Aluminum heatsink with signature Ico Bezel shape
• Convenient center-mount installation
• Engineered and Assembled in USA
• 10-watt 1000 lumen peak output

Features Direct fitment compatible with Ram 1500 2019-2024. Provides high-power reverse light, red accent light, and 4th brake light (w/ C1R option). Connects to trailer hitch wiring for simple, everyday operation of lights. Bolts on to rear bumper, no cutting or modification to factory bumper. Designed and assembled in USA. Overview. There are plenty of ways to add light behind your Ram 1500, but the new Stage Series Reverse Light Kit stands out with innovations in both function and ease of use. This kit includes a powerful reverse light, integrated red running light and high-power 4th brake light (C1R only)! The included plug-and-play harness allows you to activate it automatically with your reverse lights, for a truly integrated solution. Plug and Play. Thanks to custom-molded connectors, this kit is completely plug-and-play. The included harness plugs right into your factory trailer hitch wiring for easy installation and operation. No cutting, drilling, or routing wires to the frontend! The kit operates as an additional red accent light, with your tail lights, and then automatically switches to a high-power backup light when your vehicle is in reverse. If you went with the C1R option, it also operates as a powerful 4th brake light that activates anytime you apply your brakes. If you would like to have override functionality to manually turn on the main beam anytime. Brighter Backup. Factory reverse bulbs just don't provide enough light output to back up at night confidently. By pairing our patented TIR optics with high-powered LEDs, the pods included in this kit provide an additional reverse light that's several times brighter than stock bulbs alone. Plus, they automatically come on when the vehicle is put in reverse!

• Allows you to mount SSC1 or SSC2 LED pods underneath the rear bumper
• Provides high-power reverse light and red accent light
• Designed and assembled in USA.
• Designed and assembled in USA
• Plug-and-play wiring harness

This Part Fits:

Rock Light Magnet Mount Adapter Kit Allows for installation on magnetic surfaces Compatible with Stage Series Rock Lights Constructed of 90A polyurethane and N42 neodymium magnets Approximate pull/holding force > 35lbs Includes magnet mount and hardware Overview Magnet Mount. This magnet mount allows you to mount our Stage Series Rock Lights directly to any magnetic surface. The overmolded design keeps your rock light secure using the integrated mounting hole. And with N42 magnets, you can rest assured that the magnet won't go anywhere! Experience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we manufacture and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!

• Constructed of 90A polyurethane and N42 neodymium magnets
• Allows for installation on magnetic surfaces
• Approximate pull/holding force > 35lbs
• Compatible with Stage Series Rock Lights
• Approximate pull/holding force &gt
• Includes magnet mount and hardware
• 35lbs

Features Direct fitment compatible with Toyota Tundra 2022+. Allows you to mount SSC1 or SSC2 LED pods underneath the rear bumper. Plug-and-play wiring harness. Provides high-power reverse light, and red accent light. Designed and assembled in USA. Overview. There's plenty of ways to add light behind your vehicle, but the new Stage Series Reverse Light Kit stands out with innovations in both function and ease of use. This kit includes an integrated red running light, and plug-and-play wiring harness, for trouble-free installation! Thanks to Stage Series TIR optic technology, this kit provides a huge amount of extra reverse light. The included switch allows you to toggle it on any time, or activate automatically with your reverse lights, for a truly integrated solution. Plug and Play. Thanks to custom-molded OEM connectors, this kit is completely plug-and-play. The included adapter harness plugs right into your factory tail lights for easy installation and operation. No cutting, drilling, or additional wiring needed! The kit operates as an additional red accent light, with your tail lights, and then automatically switches to a high-power backup light when your vehicle is in reverse. The included toggle switch allows you to override the vehicle signals and turn on the main beam anytime. Backlight Functionality. The Stage Series LED pods included with this kit feature a distinctive backlight in a vibrant red color which functions as an additional accent light while driving! The backlight fully illuminates the TIR optic, providing a more unique and modern look than the small indicator LEDs found in other products.

• Allows you to mount SSC1 or SSC2 LED pods underneath the rear bumper
• Provides high-power reverse light and red accent light
• Designed and assembled in USA
• Plug-and-play wiring harness

This Part Fits:

FeaturesYellow replacement lens for SS3 LED PodMade out of durable polycarbonate with preinstalled o-ring sealAdvanced TIR optics provide high efficiency and focusAvailable in Driving SAE Fog Flood Combo or Spot beam patternsOverviewThis yellow lens is a direct replacement for the original main lens in your SS3 LED Pod. It can be used to change both the color and output pattern with a quick swap! Made of durable optical-grade polycarbonate each lens comes with an integrated o-ring to maintain a watertight seal.Easy Swap. Changing the main lens in the SS3 takes just a few seconds! Remove the four torx-head screws from the back frame pull the old lens and o-ring assembly out and put in your new lens which comes with the o-ring preinstalled. Take care not to touch the inner optical surface of your new lens during the swap or wear a pair of gloves to keep things clean. The locating pins ensure correct alignment and rotation. Reinstall the four screws so they are very hand-tight and you are ready to shine in your new color or beam pattern!Experience. After over a decade in business Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer our own products in the United States allowing for higher quality and performance with the newest and brightest LED technology. No matter what you're driving we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!

• Allows you to change the color or optic on your pod
• Replacement lens for your SS3 Pod Light

Features Plug-and-play compatible with GMC Sierra HD 2020+ fender lights Dynamic startup sequence with animated effect Fully-illuminated housing, with dual-lens design for an even glow Optional Sequential turn signal feature, with plug-and-play wiring harness OEM-grade construction and perfect fitment Engineered and assembled in USA Overview Upgraded Styling. These LED sidemarkers are a plug-and-play replacement for the factory fender lights, illuminating the entire width of the housing for a distinctive look and brighter appearance. Choose from three lens color options to get the look you're after. Unique Startup. Both the standard and sequential models feature a unique startup sequence. Every time the sidemarkers turn on, they illuminate in an intense amber color starting from the center then spreading to either side. Once they are completely illuminated, they gradually return to a running light mode. Sequencing Turn Signal. Our sequential option provides an upgrade in functionality. Anytime you hit your turn signal, the sidemarkers illuminate in a sequencing amber pattern to indicate signaling! The sequential option uses the included plug-and-play harness to power the fender lights using the headlight connector. Options Amber: These match your original sidemarkers, and are DOT/SAE compliant. Smoked: A dark appearance, great on black and grey vehicles. Clear: These are clear in color, but still have the retroreflector optics.

• Modern LED replacement for your factory sidemarker lamp
• Modern LED replacement for your factory sidemarker&nbsp
• Plug-and-play installation no modification needed
• OEM-grade retroreflector optics
• Engineered and assembled in USA
• OEM fit-and-finish
• lamp

This Part Fits:

Features Plug-and-play compatible with GMC Sierra HD 2020+ fender lights Dynamic startup sequence with animated effect Fully-illuminated housing, with dual-lens design for an even glow Optional Sequential turn signal feature, with plug-and-play wiring harness OEM-grade construction and perfect fitment Engineered and assembled in USA Overview Upgraded Styling. These LED sidemarkers are a plug-and-play replacement for the factory fender lights, illuminating the entire width of the housing for a distinctive look and brighter appearance. Choose from three lens color options to get the look you're after. Unique Startup. Both the standard and sequential models feature a unique startup sequence. Every time the sidemarkers turn on, they illuminate in an intense amber color starting from the center then spreading to either side. Once they are completely illuminated, they gradually return to a running light mode. Sequencing Turn Signal. Our sequential option provides an upgrade in functionality. Anytime you hit your turn signal, the sidemarkers illuminate in a sequencing amber pattern to indicate signaling! The sequential option uses the included plug-and-play harness to power the fender lights using the headlight connector. Options Amber: These match your original sidemarkers, and are DOT/SAE compliant. Smoked: A dark appearance, great on black and grey vehicles. Clear: These are clear in color, but still have the retroreflector optics.

• Modern LED replacement for your factory sidemarker lamp
• Modern LED replacement for your factory sidemarker&nbsp
• Plug-and-play installation no modification needed
• OEM-grade retroreflector optics
• Engineered and assembled in USA
• OEM fit-and-finish
• lamp

This Part Fits:

Features Modern LED replacements compatible with Jeep Gladiator 2020-2025 factory sidemarkers Increased output, with full strip of LEDs Plug-and-play installation, no modification needed OEM fit-and-finish with factory DRL housing OEM-grade retroreflector optics Engineered and assembled in USA Upgraded Styling. If you're looking to give your vehicle an upgrade in styling and appearance, this is the perfect way to do it! Available in three lens color, these replacement LED sidemarkers provide the custom, unique look you're after! The popular clear option provides a unique wraparound effect with the factory DRL lamps to really set your Gladiator apart on the road. Illuminating with a full array of LEDs, they illuminate brighter than factory as well! Perfect Fitment. Computer-designed for perfect alignment to be compatible with the Jeep Gladiator's factory DRL lamps, these replacement LED sidemarkers drop right into place of the factory sidemarker housing. Best of all, there is no modification required to install them! OEM Grade. Unlike others on the market, the Diode Dynamics LED sidemarkers use OEM-grade retroreflector optics, which provide reflective safety and a clean, premium appearance when off. Compare this to "diffuser" or plain flat lenses, without any reflective features. The units themselves are designed directly from OEM CAD data for a perfect fit, and the connector plugs right into the factory socket.

• Plug-and-play installation no modification needed
• Modern LED replacement for your factory lamp
• Engineered and manufactured in USA
• OEM-grade retroreflector optics
• OEM fit-and-finish

This Part Fits:

Features Modern LED replacements compatible with Chevrolet Camaro 2016-2023 factory sidemarkers Increased output, with LED styling Plug-and-play installation, no modification needed Includes four sidemarkers, to replace both front and rear OEM-grade retroreflector optics Engineered and assembled in USA Overview Upgraded Styling. If you're looking to give your vehicle an upgrade in styling and appearance, this is the perfect way to do it! These replacement units are loaded with hundreds of LEDs, for a modern and unique appearance. With the full LED array, they illuminate brighter than factory as well! Choose from three lens color options to match your vehicle or preference. OEM Grade. Unlike others on the market, the Diode Dynamics LED sidemarkers use OEM-grade retroreflector optics, which provide required the reflective safety and a clean, premium appearance when off. Compare this to "diffuser" or plain flat lenses, without any reflective features. The units themselves are designed directly from OEM CAD data for a perfect fit, and the connector plugs right into the factory socket. Reliability. Like most Diode Dynamics products, these Sidemarker LEDs compatible with Chevrolet Camaro, are designed with newer constant-current circuitry and transient voltage protection. These features, found in factory-installed lighting components, protect the circuit over time, ensuring years of flicker-free performance.

• Plug-and-play installation no modification needed
• Modern LED replacement for your factory lamp
• Engineered and manufactured in USA
• OEM-grade retroreflector optics
• OEM fit-and-finish

This Part Fits:

Features 2-way splitter wire for all Diode Dynamics RGBW products M8 5-Pin connectors 24AWG size conductors Overview Add extra connections. This RGBW 2-way splitter wire can be used anywhere you would like to split M8 5-Pin style RGBW power wires. This splitter wire is compatible with all Diode Dynamics RGBW products. Durable. This splitter is overmolded with a durable rubber where the wires split, to hold the wire junctions securely and prevent any chance of moisture or corrosion. Plug-and-play connection. This splitter wire features one female connector and two male connectors, for plug-and-play installation. The cable used is 24AWG in size. Please be aware that you can only split a signal so many times: too many high-power LEDs connected through splitters will result in voltage drop to the LEDs. If you are using a Diode Dynamics controller, we recommend using only one splitter, to add a few extra connections. Experience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we assemble and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!

• Splitter wire for all Diode Dynamics RGBW products
• 24AWG size conductors
• M8 5-Pin connectors

Features Powers 5-8 Pod SS5 CrossLink Pro Lightbars. Connects directly to the battery to power your LED pods. High capacity 10AWG wiring. Single Deutsch DT-P output connector. 60A waterproof fuse, and 80A 12V relay to safeguard the electrical systems in your pods. Overview Stage Series. This harness has been designed specifically to safely power CrossLink Pro Lightbars with five (5) or more SS5 Pro LED Pods. This harness connects directly to your vehicle's battery and allows you to power your offroad lighting. You have the option to control your pods using the included three-way switch to toggle between the backlight, off, and the main beam, or control them through your Auxiliary Switch Bank with the included adapter. This harness uses high capacity 10AWG wiring and a Deutsch DT-P connector for simple plug-and-play installation. This harness safely powers up to 45A of auxiliary lamps. The SS5 Pro draws 6.7A per pod. Compatibility. Please note that this harness has a DT-P size output connector. This is intended to connect to a corresponding Ultra-Heavy-Duty (UHD) SS5 Splitter harness, to build a multi-pod lightbar. This connector will not plug directly into any LED product offered by Diode Dynamics.

• 60A waterproof fuse and 80A 12V relay to safeguard the electrical systems in your pods
• 60A waterproof fuse and 80A 12V relay to safeguard the electrical systems in your pods
• Connects directly to the battery to power your LED pods
• Powers 5-8 Pod SS5 CrossLink Pro Lightbars
• Single Deutsch DT-P output connector
• High capacity 10AWG wiring

Features Powers Diode Dynamics LED pods with backlight functionality. Connects directly to the battery to power your LED pods. High capacity 14AWG wiring. Single Deutsch DT output connector. 30A waterproof fuse, and 60A 12V relay to safeguard the electrical systems in your pods. Overview Stage Series. This harness is intended to be used with our Stage Series LED Pods with backlight functionality. This harness connects directly to your vehicle's battery and allows you to power your offroad lighting. It features a three-way switch to toggle between the backlight, off, and the main beam. This harness uses high capacity 14AWG wiring and a Deutsch DT connector for simple plug-and-play installation. This harness safely powers up to 25A of auxiliary lamps. Please refer to the current draw data below. C1 Sport: 1.2A C1 Pro: 1.7A SSC2 Sport: 0.6A SSC2 Pro: 1.75A SS5 Sport: 2.8A SS5 Pro: 6.7A Experience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike all other LED distributors, we assemble and engineer products in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!

• Powers Diode Dynamics LED pods with backlight functionality
• Connects directly to the battery to power your LED pods
• 30A waterproof fuse and 60A 12V relay
• Single Deutsch DT output connector
• High capacity 14AWG wiring

Features Powers Diode Dynamics lights with backlight functionality. Connects to vehicle wiring for simple everyday operation of lights. High capacity 14AWG and 18AWG wiring. Dual Deutsch DT output connectors. 10A waterproof fuse to safeguard the electrical systems in your lights. Overview Easy Operation. This wiring harness allows you to connect your Diode Dynamics lights with backlight functionality to your vehicle's wiring for simple everyday operation. When paired with our LED pods with a white main beam and red backlight this harness allows your lights to operate as an additional red accent light with your tail lights and then automatically switches to a high-power backup light when your vehicle is in reverse. The included toggle switch allows you to override the vehicle signals and turn on the main beam anytime. Experience. After over a decade in business Diode Dynamics is the most trusted name in automotive LED lighting. Unlike all other LED distributors we assemble and engineer products in the United States for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!

• 10A waterproof fuse to safeguard the electrical systems in your lights
• Connects to vehicle wiring for simple everyday operation of lights
• Powers Diode Dynamics lights with backlight functionality
• Dual Deutsch DT output connectors
• High capacity 14AWG wiring

Features Powers Diode Dynamics LED pods with backlight functionality. Connects directly to the battery to power your LED pods. High capacity 14AWG wiring. Dual Deutsch DT output connectors. 30A waterproof fuse, and 60A 12V relay to safeguard the electrical systems in your pods. Overview Stage Series. This harness is intended to be used with our Stage Series pods with backlight functionality. This harness connects directly to your vehicle's battery and allows you to power your offroad lighting. It features a three-way switch to toggle between the backlight, off, and the main beam. This harness uses high capacity 14AWG wiring and Deutsch DT connectors for simple plug-and-play installation. This harness safely powers up to 25A of auxiliary lamps. Please refer to the current draw data below. C1 Sport: 1.2A C1 Pro: 1.7A SSC2 Sport: 0.6A SSC2 Pro: 1.75A SS3 Non-Backlit Sport: 2.9A SS3 Non-Backlit Pro: 1.2A SS3 Non-Backlit Max: 3.3A SS3 Backlit Sport: 1.06A SS3 Backlit Pro: 2.87A SS5 Sport: 2.8A SS5 Pro: 6.7A Control through OEM Aux Switches. This harness includes an OEM aux switch adapter wire that allows you to control your lights using a factory-installed aux switch bank. Two switches will be used - one for the main beam, and one for the backlight. For those who don't have the aux switch bank, you will use the included toggle switch adapter wire to mount a switch.

• 25A waterproof fuse and 60 amp 12V relay to safeguard the electrical systems in your offroad lighting
• Connects directly to the battery to power your offroad lighting
• battery to power your offroad lighting
• Black wire sheathing to protect cables
• Dual Deutsch DT output connectors
• Connects directly to the&nbsp
• High capacity 14AWG wiring

Overview Stage Series. This harness is intended to be used with our Stage Series pods with backlight functionality. This harness connects directly to your vehicle's battery and allows you to power your offroad lighting. It features a three-way switch to toggle between the backlight, off, and the main beam. This harness uses high capacity 16AWG wiring and Deutsch DT connectors for simple plug-and-play installation. This harness safely powers up to 6A of auxiliary lamps. Please refer to the current draw data below. C1 Sport: 1.2A C1 Pro: 1.7A SSC2 Sport: 0.6A SSC2 Pro: 1.75A SS3 Sport Main Beam: 1.1A, Backlight: 0.03A SS3 Pro Main Beam: 2.7A, Backlight: 0.03A SS3 Max Main Beam: 3A, Backlight: 0.03A Experience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike all other LED distributors, we assemble and engineer products in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!

• Connects directly to the battery to power your offroad lighting
• 15A to safeguard the electrical systems in your offroad lighting
• battery to power your offroad lighting
• Black wire sheathing to protect cables
• Dual Deutsch DT output connectors
• Connects directly to the&nbsp
• High capacity 18AWG wiring

Features Compatible with LED bulbs. Prevents hyperflash errors. Simple swap for original module. Direct fitment and proper sizing. Flasher Hyperblink Fix. Why do you need this module? When your factory turn signal bulbs go out, your vehicle's flasher senses that less power is being used, and it will blink the turn signals quickly to alert you. Since LED bulbs use less power, you get the same fast blinking, known as "hyperblinking," even though the LEDs are functioning just fine. Basically, your car thinks the bulbs went out! To slow down the blinking to regular speed, you can add resistors to increase the circuit's power consumption again. However, whenever possible, replacing the flasher with a module like this is the easiest option. Simply unplug your original flasher from under the dash, and swap it with this one to prevent hyperblinking. Quality. The flashers distributed by Diode Dynamics are produced by industry leaders such as Novita. Watch out for generic cheap flashers, as many are slightly too large and may not fit properly in the socket.

• Direct fitment and proper sizing
• Simple swap for original module
• Prevents hyperflash errors
• Compatible with LED bulbs

This Part Fits:

Features Automotive grade butyl sealant. Easy to work with, no sticky mess. Standard black color 20 feet long (enough to reseal two large headlamps). 7mm diameter, designed to fit directly in headlamp channels. Overview Easy to work with.Properly reseal any headlamp or tail lamp and protect against moisture ingress with Diode Dynamics Butyl Headlight Sealant! This new and improved sealant rope was designed specifically for headlamps, with a firmer composition than auto-store windshield glue. This makes it easy to work with, without causing a sticky mess. Each roll comes with 20 feet of butyl, enough to reseal two large headlamps.

• 7mm diameter designed to fit directly in headlamp channels
• 20 feet long (enough to reseal two large headlamps)
• Easy to work with no sticky mess
• Standard black color

Overview Stage Series.This harness is intended to be used with our Stage Series light bars and pods without backlight functionality. This harness connects directly to your vehicle's battery and allows you to power your offroad lighting. It features a two-way toggle switch and uses high capacity 14AWG wiring and Deutsch DT connectors for simple plug-and-play installation.This harness safely powers up to 25A of auxiliary lamps. Please refer to the current draw data below.SS3 Sport: 1.1ASS3 Pro: 2.7ASS3 Max: 3ASS6 Light Bar: 1.9ASS12 Light Bar: 4.2ASS18 Light Bar: 5.7ASS30 Light Bar: 9.8ASS42 Light Bar: 16ASS50 Light Bar: 18.5AExperience. After over a decade in business Diode Dynamics is the most trusted name in automotive LED lighting. Unlike all other LED distributors we assemble and engineer products in the United States for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!

• Powers up to two Diode Dynamics 50'' 42'' 30 and 18 Stage Series light bars"
• Powers up to two Diode Dynamics 50'' 42'' 30 and 18" Stage Series light bars
• Connects directly to the battery to power your light bar
• Black wire sheathing to protect cables
• Dual Deutsch DT output connectors
• High capacity 14AWG wiring

Powers up to two Diode Dynamics 12 or 6 Stage Series light bars. Connects directly to the battery. High capacity 18AWG wiring. Dual Deutsch DT output connectors. 15A waterproof fuse to safeguard the electrical systems in your light bar."

• 15A waterproof fuse to safeguard the electrical systems in your light bar
• Powers up to two Diode Dynamics 12 or 6" Stage Series light bars
• Powers up to two Diode Dynamics 12 or 6 Stage Series light bars"
• Connects directly to the battery to power your light bar
• Dual Deutsch DT output connectors
• High capacity 18AWG wiring

Power up to one Diode Dynamics 50'' 42'' 30 and 18 light bar. Connects directly to the battery. High capacity 14AWG wiring. Dual Deutsch DT output connectors. Black wire sheathing to protect cable. 25A waterproof fuse and 60 amp 12V relay."

• Powers up to one Diode Dynamics 50'' 42'' 30 and 18" Stage Series light bar
• Diode Dynamics 50'' 42'' 30 and 18 Stage Series light bar"
• Connects directly to the battery to power your light bar
• Black wire sheathing to protect cables
• Dual Deutsch DT output connectors
• High capacity 14AWG wiring
• Powers up to one&nbsp

Prevents hyperblinking caused by installing LED bulbs. Includes everything needed for installation. 3-year warranty.

• Prevents hyperblinking caused by installing LED bulbs
• Includes everything needed for installation
• 3-year warranty

Features Adds unique, programmable functions Compatible with LED or standard bulbs, no hyperflash Plug and play swap for original module Assembled in USA, 3 year warranty A Smarter Flasher The SmartTap™ is a replacement turn signal flasher relay, compatible with any vehicle using a CF18 (LM449) Flasher. With plug-and-play installation, it offers a lot more than your average relay: an embedded microcontroller is loaded with exclusive software, which adds new features to your vehicle! You can program the features just the way you'd like, with the help of the included programming guide. Tap-to-Signal: Anytime the turn signal is tapped, the turn signal will blink a number of times automatically. This one-touch signaling is a convenient way to signal other drivers when switching lanes. The number blinks is programmable, to make it as long or short as you'd like. Unique Hazard Functions: The SmartTap™ has built-in strobe, slo-mo and wig-wag hazard functions to help your vehicle stand out when the hazards are on. Apply these functions on their own, together, or with the strobe setting for a total of eight unique hazard functions! Arrival and Departure Modes: When the lock or unlock button is pressed, your turn signals will stay on in a steady glow, for better visibility when approaching or leaving the vehicle at night. The lighting time can be adjusted from 10-90 seconds for additional illumination, or disabled if desired. This product was designed, programmed, and assembled by Diode Dynamics, in St. Louis, Missouri, USA.

• Direct fitment and proper sizing
• Simple swap for original module
• Prevents hyperflash errors
• Compatible with LED bulbs

This Part Fits:

Features Compatible with LED bulbs. Prevents hyperflash errors. Simple swap for original module. Direct fitment and proper sizing. Flasher Hyperblink Fix. Why do you need this module? When your factory turn signal bulbs go out, your vehicle's flasher senses that less power is being used, and it will blink the turn signals quickly to alert you. Since LED bulbs use less power, you get the same fast blinking, known as "hyperblinking," even though the LEDs are functioning just fine. Basically, your car thinks the bulbs went out! To slow down the blinking to regular speed, you can add resistors to increase the circuit's power consumption again. However, whenever possible, replacing the flasher with a module like this is the easiest option. Simply unplug your original flasher from under the dash, and swap it with this one to prevent hyperblinking. Quality. The flashers distributed by Diode Dynamics are produced by industry leaders such as Novita. Watch out for generic cheap flashers, as many are slightly too large and may not fit properly in the socket.

• Direct fitment and proper sizing
• Simple swap for original module
• Prevents hyperflash errors
• Compatible with LED bulbs

This Part Fits:

Features Compatible with LED bulbs. Prevents hyperflash errors. Simple swap for original module. Direct fitment and proper sizing. Flasher Hyperblink Fix. Why do you need this module? When your factory turn signal bulbs go out, your vehicle's flasher senses that less power is being used, and it will blink the turn signals quickly to alert you. Since LED bulbs use less power, you get the same fast blinking, known as "hyperblinking," even though the LEDs are functioning just fine. Basically, your car thinks the bulbs went out! To slow down the blinking to regular speed, you can add resistors to increase the circuit's power consumption again. However, whenever possible, replacing the flasher with a module like this is the easiest option. Simply unplug your original flasher from under the dash, and swap it with this one to prevent hyperblinking. Quality. The flashers distributed by Diode Dynamics are produced by industry leaders such as Novita. Watch out for generic cheap flashers, as many are slightly too large and may not fit properly in the socket.

• Direct fitment and proper sizing
• Simple swap for original module
• Prevents hyperflash errors
• Compatible with LED bulbs

This Part Fits: