Increase job site safety and vehicle visibility with the Putco Stinger Tri-Color LED Lighthead. Designed for work trucks and commercial vehicles, these low-profile strobe lights feature high-power TIR (Total Internal Reflection) optics for intense illumination that maintains compliance across various state requirements. Each lighthead is a versatile tri-color unit, allowing you to cycle through Amber, White, and Blue lighting to suit your specific duty needs.

Built with a durable solid-state design, the Stinger 950104 is engineered for long-term reliability in the field. The programmable interface offers 30 different strobe patterns, providing the flexibility needed for different hazard environments. With an expected lifespan of 50,000 hours and backed by a five-year warranty, these lights are a dependable addition to any professional lighting setup.

• MPN: 950104
• Light Type: High-power TIR LEDs
• Colors: Tri-color (Amber, White, and Blue)
• Patterns: 30 programmable strobe patterns
• Durability: Solid-state design with 50,000-hour life expectancy
• Warranty: Five-year manufacturer warranty
• Included: (1) Stinger LED Lighthead

Increase visibility and safety on the job site with the Putco Work Blade 60-inch LED light bar. Engineered specifically for contractors, construction crews, and fleet vehicles, this light bar provides high-intensity amber and white strobe lighting to ensure your vehicle is visible in all conditions. The LEDs are fully enclosed in a durable, tinted polycarbonate housing that is completely watertight, protecting the internal components from road spray, debris, and harsh weather.

Designed for versatile mounting, the Work Blade can be installed on cab racks, below the tailgate, on front grilles, roof lines, or snowplow frames. The kit includes a comprehensive wiring harness to streamline the 12-volt installation process, making it a reliable choice for professional work trucks.

• Series: Work Blade
• Length: 60 inches
• Lighting Colors: Amber and White strobe patterns
• Housing: Tinted, watertight polycarbonate
• System Voltage: 12V
• Included Components: Wiring harness and installation guide
• Manufacturer Part Number: 93009-60
• Warranty: 3-Year Warranty

Increase job site visibility and safety with the Putco 44-inch Work Blade LED Light Bar. Specifically designed to integrate with Putco Boss Racks, this high-intensity strobe light bar provides essential amber and white lighting for contractors, construction crews, and fleet service vehicles.

• Dual-Color Strobe: High-output amber and white LEDs provide high-visibility strobe patterns for safety on and off the road.
• Durable Construction: The light bar is fully enclosed in a tinted polycarbonate housing that is completely watertight to withstand harsh weather and road debris.
• Versatile Application: While optimized for Boss Racks, the low-profile design allows for mounting on cab racks, grilles, snowplows, or below the tailgate.
• Complete Kit: Includes a dedicated wiring harness for 12V systems and a comprehensive installation guide.
• Manufacturer Part Number: 93009-44
• Warranty: 3-Year Manufacturer Warranty

Fits all 2025 Ford Expedition models including Active, King Ranch, Platinum, SSV, and Tremor trims (including Max variants).

Replace your standard factory front grille emblem with the Putco Luminix LED emblem, offering a refined, modern upgrade that preserves your vehicle's functionality. This officially licensed Ford emblem is engineered for a precision fit, utilizing the original mounting points for a direct, headache-free installation. Featuring advanced Chip-On-Board (COB) LED technology, it provides high-intensity 6,500K white illumination with a signature startup sequence that activates when the engine is ignited.

Built for durability in harsh environments, this emblem is injection-molded for UV and chip resistance and carries an IP69K rating, meaning it is fully sealed against dust, steam, and high-pressure water. The matte black finish provides a sleek aesthetic that is fully compatible with front-facing cameras and driver-assist sensors. Designed and manufactured in Des Moines, IA, this component is backed by a 3-year warranty.

• MPN: 92610-08
• Illumination: 6,500K White COB LEDs
• Weather Rating: IP69K (dustproof, steam-resistant)
• Construction: Injection-molded, UV-resilient matte black housing
• Installation: Direct OEM post mount replacement
• Compatibility: Retains full camera and sensor functionality
• Patent: 11,371,688 B1
• Manufactured: Made in the USA

Fits 2024-2025 Ford F-150 models (including XL, XLT, Lariat, King Ranch, Platinum, Tremor, and Raptor) equipped without front camera or washer systems.

The Putco LUMINIX LED Ford Emblem is a precision-engineered direct replacement for your factory badge, combining OEM-level fitment with advanced lighting technology. Each emblem is injection-molded for a durable, UV-resilient, and chip-resistant matte black finish. Upon engine ignition, the emblem performs a signature startup sequence, transitioning into a crisp 6,500K white illumination powered by high-efficiency chip-on-board (COB) LEDs.

Designed for the most demanding environments, this emblem carries an IP69K rating, signifying total protection against dust and high-pressure, high-temperature water or steam. Installation is streamlined via a plug-and-play wiring harness that connects directly to the vehicle fuse box, utilizing existing OEM mounting points for a seamless look.

• Illumination: High-output 6,500K White LEDs with eye-catching startup sequence.
• Durability: IP69K rated for maximum resistance to dust, high-pressure water, and steam.
• Construction: Injection-molded matte black finish; UV and chip resistant.
• Installation: Plug-and-play wiring to fuse box; bolts to factory OEM post mounts.
• Manufacturer Part Number: 92608
• Patent: 11,371,688 B1

Fits 2018-2025 Ford F-150 and F-150 Lightning (including Raptor, Tremor, and Platinum trims).

Upgrade your truck's front-end aesthetics with the Putco LUMINIX LED Ford Emblem. This direct replacement for the factory badge is engineered to fit seamlessly into OEM post mounts. Built with state-of-the-art Chip-on-Board (COB) LEDs, it produces a crisp, bright 6,500K white light that activates with a signature startup sequence upon engine ignition. The injection-molded matte black construction is both UV-resilient and chip-resistant, ensuring a long-lasting finish that stands up to the rigors of the road.

• Precision Fitment: Designed to spec on the OEM badge to maintain full functionality of front-facing cameras, sensors, and spray nozzles.
• IP69K Rated: Fully sealed against dust and capable of resisting high-pressure water and steam cleaning.
• Signature Illumination: High-output 6,500K LED lighting with an eye-catching startup sequence.
• Easy Installation: Plug-and-play wiring routes directly to the fuse box for a headache-free setup.
• Durable Construction: Injection-molded matte black finish is resistant to chipping and UV fading.
• Patent Protected: US Patent 11,371,688 B1.

Includes all necessary plug-and-play wiring and mounting hardware for a complete installation.

Fits select 1999-2026 Chevrolet, Dodge, Ford, GMC, Nissan, and Ram trucks and SUVs. This vehicle-specific kit is designed for a seamless installation between the tailgate and bumper, providing a significant increase in rear visibility and safety.

The Putco Blade features high-power COB (Chip-on-Board) LEDs arranged in a dense pattern to create a continuous, solid beam of light without the "hot spots" seen in cheaper light bars. The assembly is encapsulated in a tinted polycarbonate resin that protects the internal electronics from moisture, dust, and road debris. This multi-function bar syncs directly with your vehicle's factory lighting to provide red running and brake lights, amber turn signals, and a high-intensity white reverse light.

• Length: 60 inches
• LED Type: High-output COB LEDs
• Housing: Tinted polycarbonate resin
• Installation: Direct-fit plug-and-play wiring harness
• Functions: Brake, Running, Turn Signal, and Reverse
• Estimated Install Time: 30 minutes
• Manufacturer Part Number: 9202060-04
• Warranty: 3-Year Manufacturer Warranty

Each kit includes a vehicle-specific wiring harness that plugs directly into your factory taillight system, maintaining all OEM connections without the need for cutting or splicing. Patented mounting clips allow for a secure fit on both straight and curved surfaces.

Protect your lighting investment with the Baja Designs S2 Series Rock Guard. Engineered specifically for the S2 LED light housing, this guard provides a rugged layer of defense against rock strikes, roost, and trail debris that can cause lens damage during off-road excursions.

Constructed from impact-resistant materials, this black cover snaps securely onto the face of the light for a precise, vibration-resistant fit. Beyond protection, these guards are ideal for users who need to comply with local regulations requiring off-road lighting to be covered while operating on public highways.

• Compatible with Baja Designs S2 Series LED lights
• Shields lenses from impacts and environmental debris
• Easy snap-on installation and removal
• Durable construction for harsh off-road conditions
• Color: Black
• Manufacturer Part Number: 660100

The Baja Designs S2 Pro LED Spot Light provides powerful illumination in a versatile, compact form factor. This specific model (MPN 481001) features a black flush mount housing for a seamless, low-profile installation on bumpers, truck beds, or custom panels. The clear lens and specialized spot optics are engineered for maximum distance, focusing light where you need it most during high-speed off-road driving or nighttime technical maneuvers.

• Series: Baja Designs S2 Pro
• Beam Pattern: Spot (long-distance focus)
• Housing Type: Black Flush Mount
• Lens Color: Clear
• Manufacturer Part Number: 481001

Whether you are adding auxiliary lighting to a race rig or improving visibility on a work vehicle, the S2 Pro delivers professional-grade performance in a rugged, weather-resistant package designed to withstand the harshest environments.

Rigid Industries' D-Series PRO Dually LED light pods deliver professional-grade illumination in a compact 3-inch square package. Part of the Marine Series, these pods are built with IP68-rated sealing, UV-resistant powder coat, and corrosion-resistant aluminum alloy to withstand harsh saltwater and off-road conditions. The 60-degree flood beam provides broad, even lighting for close-range visibility.

• Advanced LED technology delivers up to 102% more raw lumens than previous D-Series models (PRO-level output)
• Durable aluminum alloy housing with UV-resistant powder coat finish
• Impact-resistant polycarbonate lens
• Integrated thermal management system prevents overheating
• Waterproof connector and IP68 dust/water ingress protection
• SAE J575 compliant for shock and vibration resistance
• 9-36V DC wide operating range with reverse polarity and over/under voltage protection
• 50,000+ hour LED lifespan; RFI/EMI protection; RoHS compliant
• Sold as a pair

Rigid Industries Adapt XP Xtreme Powersports LED Light Pair delivers adaptive illumination for motorcycles and powersports vehicles. Utilizing two layers of adaptive response—Active Power Management (APM) and Active View Technology—the light monitors vehicle voltage and speed to automatically transition between scene, driving, and spot beam patterns. This seamless adjustment reduces eye fatigue and provides brighter, more natural light for every speed.

• Two-layer adaptive response: Active Power Management (APM) senses voltage to optimize power draw; Active View Technology uses internal GPS to adjust beam pattern by speed
• Three optic zones: scene (low speed), driving (moderate speed), spot (high speed) with seamless transition
• High-strength aluminum heat sink and impact-resistant polycarbonate lens
• Durable UV polyester powder coat finish
• Magnetic reed power clip for two power modes:
  • Clip installed: limits 2.7A (single) / 2.5A per light (pair); 40W output (single)
  • Clip removed: up to 6.5A (single) / 5.7A per light (pair); 90W single light output, 80W pair output
• Voltage range: 9–32 VDC
• Off-road use only
• Wiring harness sold separately (Rigid part #36360)

Note: Wire harness and switch are not included and must be purchased separately.

The Rigid Industries 6-inch E-Series Flood LED light bar delivers widespread, powerful illumination for off-road, powersports, marine, and general automotive applications. Equipped with advanced LED technology, this double-row light bar produces up to 111% more raw lumens than previous generations, giving you exceptional nighttime visibility. The Flood beam pattern provides a broad, even spread of light, ideal for scene lighting, work areas, and trail riding.

Engineered for durability, the E-Series features a high-grade aluminum alloy housing with a UV-resistant powder coat finish, an impact-resistant polycarbonate lens, and an integrated thermal management system to maintain optimal performance. It is IP68 compliant against dust and water ingress, SAE J575 compliant for shock and vibration resistance, and includes over/under voltage and reverse polarity protection. With a 50,000+ hour lifespan and a 9-36V DC operating range, this light bar is built to last.

• Flood beam pattern for wide, even illumination
• High-output LED technology with up to 111% more lumens
• IP68 rated: dust-tight and waterproof
• SAE J575 compliant: vibration and shock resistant
• Impact-resistant polycarbonate lens
• UV-resistant powder coat over high-grade aluminum alloy housing
• Integrated thermal management system
• Over/under voltage and reverse polarity protection
• RFI/EMI protection and RoHS compliant
• 50,000+ hour LED lifespan
• 9-36V DC operating voltage
• Includes waterproof connector (exclusions apply)

Enhance your off-road visibility with the Raxiom 3-Inch 8-LED Cube Light. Designed for universal application, this powerful lighting solution is ideal for Jeep owners and off-roaders who need reliable illumination for trails and campsites. Utilizing eight 3W high-intensity Philips LEDs, this 24W cube light delivers a high-lumen output with a crisp 6000K color temperature. The integrated combination beam pattern provides both a focused spot for distance and a wide flood for peripheral awareness.

Built to withstand the rigors of the trail, this Raxiom light features a rugged diecast aluminum housing finished in a textured black powder coat for superior corrosion resistance. The durable polycarbonate lens and IP68 waterproof rating ensure the unit remains sealed against dust and submersion in mud or water. Operating on a wide 10V-30V DC range with an average lifespan of 50,000 hours, it is a long-term lighting upgrade for any vehicle with a 12V system.

• Manufacturer Part Number: J108772
• Light Output: (8) 3W Philips high-intensity LEDs
• Beam Pattern: Combination spot and flood beam
• Color Temperature: 6000K
• Housing: Diecast aluminum with textured black powder coat finish
• Lens: Impact-resistant polycarbonate
• Waterproof Rating: IP68
• Operating Voltage: 10V-30V DC
• Estimated Lifespan: 50,000 hours
• Includes: Universal post mounting bracket, hardware, and wiring pigtail connector

Increase your peripheral visibility on the trail or at the campsite with the Raxiom 6-Inch Slim 6-LED Off-Road Light. Engineered with a wide flood beam pattern, this low-profile light bar delivers 1170 lumens of high-intensity illumination, making it an ideal choice for lighting up large work areas or tight trails. Its slim dimensions (6.2 inches long by 1.77 inches tall) allow for versatile mounting in narrow gaps where traditional light bars won't fit.

Constructed for the rigors of off-roading, this light features a robust diecast aluminum housing finished in a textured black powder coat for long-term corrosion resistance. The clear polycarbonate lens protects six 3W high-intensity Epistar LEDs, providing an average lifespan of 50,000 hours. With an IP67 waterproof rating, this unit is fully sealed against dust and moisture, ensuring reliable performance in muddy or wet conditions.

• Beam Pattern: Flood
• Output: 1170 Lumens
• Light Source: (6) 3W High Intensity Epistar LEDs
• Voltage: 10V-30V DC
• Housing: Diecast Aluminum with Textured Black Powder Coat
• Lens: Clear Polycarbonate
• Waterproof Rating: IP67
• Dimensions: 6.2" L x 1.77" T
• Average Lifespan: 50,000 Hours
• Part Number: J108313

This universal light includes mounting brackets and hardware for a straightforward installation. As a universal component, some adaptation or custom wiring may be required; the light comes with a short pigtail connector for integration into your existing electrical system.

Fits select 2015-2023 Dodge Challenger models including SXT, R/T, Scat Pack, and SRT Hellcat.

Upgrade your Challenger's entry lighting with Raxiom Axial Series LED Door Courtesy Lamps. These units are designed to replace the dim, factory-installed incandescent bulbs with high-output white LEDs, providing significantly better illumination when entering or exiting the vehicle at night. The crisp white light not only improves safety and visibility but also gives your interior a more modern appearance.

Built to precise standards using OEM-grade materials, these lamps feature a crystal-clear lens and a weather-sealed housing to protect the internal electronics from moisture and debris. Installation is a straightforward, tool-free process; the direct-fit design plugs directly into the factory wiring harness without any cutting or modifications, allowing for a complete upgrade in approximately 10 minutes.

• Super bright white LED technology
• Direct plug-and-play replacement for factory lamps
• Clear lenses for maximum light output
• Weather-sealed housing for long-term durability
• Includes both driver and passenger side lights
• Manufacturer Part Number: CH16605

Fits 2021-2026 Ford Bronco (including Badlands, Raptor, Wildtrak, and Heritage Edition models). Compatible with both factory hardtops and soft tops.

The KC HiLiTES AK-91425 system features the Gravity Titan LED Light Bar, an advanced lighting platform designed for maximum illumination and thermal efficiency. Driven by the Titan Core and 3-Source LED optics, this 50-inch bar delivers a broader illumination zone with increased peak intensity and beam distance compared to previous Gravity systems. The Dual Power Mode functionality allows operators to toggle between a full High-Power Mode for technical night driving and an integrated Amber Dust Light for high visibility in silt, snow, or fog.

This kit includes vehicle-specific overhead mounting brackets constructed from heavy-duty steel with a black powder coat finish. These brackets utilize the Ford Bronco's factory accessory mounting locations for a secure, bolt-on installation. The system also features the patented Infinity Ring system, which allows the light bar to be linked or curved to match the vehicle's profile.

• Gravity Titan 50" 8-Light LED Bar with Combo Beam (SKU 91418)
• Dual Power Mode: High-Power white beam and integrated Amber Dust Light
• Titan Core: Pass-through front cooling for superior thermal management
• MoistureBlock Technology: Weather-sealed integrated plug protects electronics
• Gravity Reflective Diode (GRD) technology for focused beam precision
• Complete wiring kit with 3-position switch included
• Heavy-duty steel overhead mounting brackets (SKU 7332)
• 8x Black Gravity 6" light covers with yellow KC logo
• Includes cover removal tool

The XK Glow Super Slim 26-Inch Offroad LED Chase Bar (XK068026) is engineered to provide high-intensity rear-facing visibility for UTVs, pre-runners, and trail rigs. This 72W LED light bar features an ultra-low profile design, making it ideal for mounting on roll cages or roof racks where space is limited and aerodynamics are a priority.

Equipped with four distinct operating modes, this chase bar allows drivers to communicate with following vehicles in dusty or low-visibility conditions. The rugged construction is built to withstand the constant vibrations and impacts associated with high-speed off-road use, ensuring consistent performance when it matters most.

• Manufacturer Part Number: XK068026
• Length: 26 inches
• Power Output: 72W
• Lighting Modes: 4 selectable modes
• Profile: Super Slim housing for versatile mounting

Enhance under-vehicle visibility and off-road safety with the XK Glow Advanced Series 12-Piece White Rock Light Kit. This comprehensive lighting system is designed to illuminate the undercarriage, wheel wells, and chassis, providing clear sightlines for navigating obstacles on the trail or creating a clean aesthetic for show applications.

Built to withstand the rigors of off-road use, each high-intensity LED pod delivers crisp white light in a durable housing. The 12-pod configuration allows for extensive coverage on larger wheelbases, ensuring no dark spots remain under the vehicle. The kit includes a complete wiring harness and the necessary hardware to secure the pods to factory mounting points or custom locations.

• Complete 12-piece high-output white LED pod set
• Advanced series wiring harness for reliable power delivery
• Compact, weather-resistant pod design for versatile placement
• Includes all necessary mounting hardware
• Manufacturer Part Number: XK-WROCK-PRO

The XK Glow XKchrome Advanced Kit provides a comprehensive underbody lighting solution designed for off-road durability and high-impact style. This 8-piece set features high-intensity RGB LED pods, each delivering 6W of output to illuminate wheel wells, chassis components, and the ground beneath your vehicle.

Central to this kit is the XKchrome Bluetooth controller, which pairs with your smartphone to unlock advanced lighting features. Using the dedicated app, you can select from millions of colors, sync lights to your music, or utilize the "Chameleon" feature to match colors through your phone’s camera. The system is built for the rigors of the trail, ensuring consistent performance in wet or dusty environments.

• Kit Includes: 8 high-power RGB LED pods and XKchrome Bluetooth controller
• Power Output: 6W per pod
• Control: App-based Bluetooth connectivity
• Features: Music sync, speed-sensing color shifts, and customizable patterns
• Manufacturer Part Number: XK-ROCK-ADV

Enhance your vehicle's accent lighting with the XK Glow XKChrome 7 Color Series 2nd Gen Color Pod. This high-output LED pod is engineered as a compact lighting solution for tight spaces where traditional strips cannot fit, such as engine bays, interior footwells, or complex underbody sections. As a 2nd generation component, it features refined internal circuitry and a durable housing designed to withstand the vibrations and environmental exposure common in automotive applications.

This pod integrates seamlessly with existing XKChrome 7-color controller systems, providing consistent color matching and reliable performance. Its low-profile design allows for a clean, hidden installation while delivering a wide spread of vibrant light for a professional custom finish.

• Manufacturer Part Number: XK-4P-P
• Series: XKChrome 7 Color Series (2nd Gen)
• Product Type: LED Accent Light Pod
• Application: Universal vehicle interior or exterior accent lighting
• Compact design for mounting in restricted spaces

The Rigid Industries 360-Series 6-inch RGBW LED spot light pair combines a focused spot beam pattern with a customizable RGBW backlight. Each light produces up to 8,600 raw lumens, while the independently controlled backlight offers eight color options: red, green, blue, light blue, purple, amber, white, and a demo mode.

Built around a high-grade aluminum alloy housing and integrated heatsink, the 360-Series features patented forward-projecting optics, a black exposed printed circuit board, and a pressure-equalizing vent. The LEDs are rated for a 50,000-hour lifespan and operate over a 9–36 VDC range.

Universal installation is simplified with flying leads and a dedicated backlight wire for separate control of the primary LEDs and RGBW backlight. Sold as a pair and intended for off-road use only, each kit includes two lights and is backed by Rigid’s limited lifetime warranty.

• Pair of 6-inch round LED spot beam off-road lights
• RGBW backlight: red, green, blue, light blue, purple, amber, white, demo mode
• Independent backlight control via dedicated wire
• Up to 8,600 raw lumens per light
• High-grade aluminum alloy housing and heatsink
• Patented forward-projecting optics
• Black exposed printed circuit board
• Pressure-equalizing vent
• 50,000-hour LED lifespan
• Operating voltage: 9–36 VDC
• Universal flying leads for installation
• Off-road use only
• Limited lifetime warranty

A pair of 6-inch round LED off-road lights from Rigid Industries' 360-Series, combining a high-output drive beam with an independently controlled RGBW backlight. Each light is housed in a high-grade aluminum alloy body with a black exposed circuit board and a pressure-equalizing vent. Patented forward-projecting optics deliver up to 8,600 raw lumens, while the RGBW backlight offers eight selectable colors—red, green, blue, light blue, purple, amber, white, and demo mode—via a dedicated wiring lead. Universal flying leads and a 9–36 VDC operating range make integration straightforward.

• 6-inch round LED off-road light (pair)
• Drive beam pattern with patented optics
• RGBW backlight – 8 color options: red, green, blue, light blue, purple, amber, white, demo mode
• Backlight independently controlled via dedicated wire
• Black exposed printed circuit board
• High-grade aluminum alloy housing and heatsink
• Pressure-equalizing vent
• 9–36 VDC input, flying leads for universal installation
• Up to 8,600 raw lumens
• 50,000-hour LED lifespan
• Limited lifetime warranty
• For off-road use only

Rigid Industries part number 36411.

The Rigid Industries Amber PRO light cover is a snap-on lens protector designed for D-Series LED lights. It adds an amber tint to the light output while shielding the lens from road debris, scratches, and UV exposure. Constructed from durable polycarbonate, the cover installs and removes quickly without tools—snap on for colored protection, snap off to revert to a clear beam pattern. This cover is also ideal for compliance with local regulations that require off-road lights to be covered when driving on public roads.

• Transparent Amber PRO color
• Polycarbonate construction for impact resistance
• Snap-on, snap-off design for tool-free installation
• Provides an extra layer of lens protection
• Compatible with Rigid Industries D-Series LED lights
• Manufacturer part number: 201993

Rigid Industries E2 Series 10-inch LED light bar with a Drive/Hyperspot combo beam pattern. Engineered for versatility across off-road, marine, powersports, and general automotive applications, this light bar combines durable construction with advanced protection features.

• Combo beam pattern: Drive / Hyperspot optics
• Waterproof connector (exclusions may apply)
• Integrated thermal management system
• SAE J575 compliant – shock/vibration resistant
• Impact-resistant polycarbonate lens
• IP68 rated – sealed against dust and water ingress
• UV-resistant powder coat finish
• Over/under voltage protection
• Reverse polarity protection
• High-grade aluminum alloy housing
• 50,000+ hour LED lifespan
• RFI/EMI protection
• RoHS compliant
• Wide operating voltage: 9–36V DC

The Rigid Industries 6-inch E-Series Pro is a double-row LED light bar engineered with a spot/flood combo beam pattern, combining a focused long-range spot with a wider flood for balanced illumination. Compared to earlier E-Series models, the PRO version delivers up to 111% more raw lumens thanks to upgraded LED technology. Blacked-out circuit boards and prominent RIGID branding give it a distinctive, low-profile look.

• Beam pattern: Spot/Flood combo
• Length: 6 inches; double-row design
• Housing: High-grade aluminum alloy with durable UV-resistant powder coat
• Lens: Impact-resistant polycarbonate
• Ingress protection: IP68 rated – dust-tight and protected against water immersion
• Shock/vibration compliance: SAE J575
• Electrical: 9-36 V DC operation, over/under voltage protection, reverse polarity protection, RFI/EMI protection
• Thermal management: Integrated system
• Lifespan: 50,000+ hours
• Certifications: RoHS compliant
• Includes: Waterproof connector (exclusions apply), installation instructions

Originally developed for off-road racing, the E-Series Pro is versatile enough for power sports, marine, general automotive, and first responder applications.

Improve rear-facing visibility and safety on the trail with the Diode Dynamics Stage Series C2 2.0 LED Chase Light Kit. This universal kit is designed for mounting on racks, roll bars, or other rear-facing points, providing high-output illumination that cuts through heavy dust, fog, and haze. The kit features two C2 2.0 LED pods that combine a powerful yellow flood beam with a low-power red backlight for multi-functional use.

Equipped with advanced TIR (Total Internal Reflection) optics, these pods deliver superior light efficiency compared to standard reflectors. The yellow flood beam serves as a high-visibility chase light, while the integrated red backlight functions as a running light or scene lighting when stationary. Assembled in the USA, these compact pods offer professional-grade performance in a durable, space-saving housing.

• Functionality: High-power yellow chase light and low-power red running light
• Optics: High-efficiency TIR optics for maximum output and clarity
• Beam Pattern: Wide flood pattern for broad rearward visibility
• Mounting: Universal design for roll bars, racks, and custom mounting points
• Build: Made in USA with Global Materials
• MPN: DD8441P

Fits 2018-2025 Jeep Wrangler JL/JK and 2020-2025 Jeep Gladiator JT.

The KC HiLiTES Gravity Titan 50" LED Light Bar represents the peak of off-road lighting technology. Powered by the innovative Titan Core and 3-Source LED optics, this system provides a massive illumination zone with increased peak intensity and superior beam distance. Featuring Dual Power Modes, you can toggle between a high-output mode for dark trails and an integrated Amber Dust Light for enhanced visibility in silt, snow, or fog.

This system includes vehicle-specific overhead mounting brackets manufactured from heavy-duty steel with a durable black powder coat finish. These brackets utilize factory mounting points for a secure, bolt-on installation that withstands harsh off-road vibrations. Note: Not compatible with Wrangler 4xe, Wrangler 392, or Gladiator Mojave models.

• Gravity Reflective Diode (GRD): Delivers precise beam focus and efficiency.
• Titan Core: Features patented pass-through front cooling for optimal thermal management.
• Infinity Ring System: Linkable and curvable design for modular flexibility.
• MoistureBlock Technology: Integrated weather-sealed plug prevents water and debris intrusion.

What's Included

• (1) Gravity Titan 50" LED Light Bar (8-Light Combo Beam) - MPN AK-91424
• (1) Pair of Jeep Wrangler/Gladiator Overhead Mounting Brackets (SKU 7327)
• (1) Complete Wiring Kit with 3-Position Switch
• (8) 6" Black Light Covers with Yellow KC Logo
• (1) Cover Removal Tool

Protect your lighting investment with the KC HiLiTES FLEX ERA 10-inch Clear Light Shield (MPN 5332). Engineered specifically for the FLEX ERA LED light bar series, this transparent cover provides a rugged barrier against rock chips, trail debris, and harsh environmental conditions without compromising light output or beam pattern clarity.

• Precision-molded for a secure, snap-on fit over 10-inch FLEX ERA LED light bars.
• Transparent clear finish ensures maximum light transmission for nighttime and off-road visibility.
• Durable polycarbonate construction resists impact and UV yellowing.
• Easy to install and remove for quick cleaning or maintenance.
• Sold individually; manufacturer part number 5332.

Improve your rear-facing visibility with the KC HiLiTES FLEX ERA 1 LED 2-Light Backup Kit. Engineered for recessed installation in bumpers or other flat surfaces, this kit provides a high-output spread beam pattern that illuminates a wide area behind the vehicle, making it ideal for reverse lighting or campsite utility.

The FLEX ERA 1 (MPN 521) features a compact, high-intensity LED design that delivers exceptional brightness without the bulk of traditional auxiliary lights. This kit includes a specialized rear-extended wiring harness designed to reach the back of most trucks and SUVs, ensuring a clean installation and reliable performance in harsh environments.

• High-output FLEX ERA 1 LED pods with spread beam optics
• Flush mounting plates for a clean, factory-style recessed finish
• Rear-extended wiring harness for simplified installation
• Durable construction designed to withstand off-road vibration and weather
• Manufacturer Part Number: 521

Refresh or customize your lighting setup with this 6-pack of KC HiLiTES Cyclone V2 LED replacement lenses. These durable lenses allow you to maintain the performance of your Cyclone V2 series lights or switch colors to meet specific trail, safety, or aesthetic requirements.

Constructed from high-impact polycarbonate material, these lenses are engineered to withstand harsh environments while protecting the internal LED components. The snap-on design allows for straightforward removal and installation with the assistance of a small tool, ensuring a secure fit that resists vibration during off-road use.

• Manufacturer Part Number: 4413
• Material: High-impact Polycarbonate
• Color: Red
• Quantity: 6-Pack
• Fitment: Specifically for KC HiLiTES Cyclone V2 LED lights
• Attachment: Snap-on installation (tool required for removal)