The Rigid Industries SR-M PRO Flush Mount LED light delivers formidable output in an extremely compact footprint. Its flush-mount design integrates cleanly into bumpers, body panels, or trailers, while the 60-degree beam pattern provides wide, even illumination for backup lighting, powersports, and other space-constrained applications. Updated LED technology pushes output up to 111 percent more raw lumens compared to earlier versions, all in a rugged housing built to withstand harsh conditions.

• Waterproof Connector (Exclusions Apply)
• Integrated Thermal Management System
• SAE J575 Compliant – Shock/Vibration
• Impact Resistant Polycarbonate Lens
• IP68 Compliant – Dust/Water Ingress
• Durable UV Resistant Powder Coat
• Over/Under Voltage Protection
• Reverse Polarity Protection
• High-Grade Aluminum Alloy Housing
• 50,000+ Hour Lifespan
• RFI/EMI Protection
• RoHS Compliant
• 9-36 V DC Operating Range

Backed by Rigid Industries' legendary build quality, this SR-M PRO flush mount light is ready for demanding off-road, marine, and industrial use.

The Rigid Industries SR-Series 20-inch Amber PRO Spot LED light bar is purpose-built for off-road conditions where white light creates blinding glare in dust, smoke, or fog. The amber wavelength cuts through low-visibility environments, reducing eye strain and improving contrast so you can identify obstacles farther down the trail. A spot beam pattern delivers long-distance illumination, while the slim, low-profile aluminum housing and blacked-out circuit board blend discreetly onto roof racks, bumpers, or chase racks.

• IP68 dust/water ingress protection
• Over/under voltage and reverse polarity protection
• Aluminum alloy housing and heatsink
• Pressure equalizing vent prevents moisture buildup
• 50,000+ hour LED lifespan
• Wide 9-36 VDC operating range
• Patented optics optimize beam pattern
• Amber PRO lens for harsh conditions
• Limited lifetime warranty
• Off-road use only

The Rigid Industries SR-M PRO Flush Mount Flood LED light combines a remarkably small footprint with a meaningful jump in output—up to 111% more raw lumens compared to earlier SR-M models, thanks to upgraded LED technology. Its flush-mount design and flood beam pattern make it ideal for broad, close-range illumination on rear bumpers, cargo areas, trailers, motorcycle handlebars, and powersports machines where space is tight and reliable light is non-negotiable.

Engineered to handle harsh environments, the SR-M PRO uses a high-grade aluminum housing with a UV-stable powder coat finish and a tough polycarbonate lens. Wide 9–36V DC compatibility, built-in over/under-voltage and reverse polarity protection, and RFI/EMI shielding let it operate safely across varying electrical systems. The integrated thermal management system maintains consistent output without overheating, and a waterproof connector (exclusions apply) paired with an IP68 dust/water ingress rating keeps the elements out.

• Output: Up to 111% more lumens than previous SR-M
• Beam: Flood (broad, smooth illumination)
• Housing: High-grade aluminum alloy, UV-resistant powder coat
• Lens: Impact-resistant polycarbonate
• Input Voltage: 9–36 V DC
• Ingress Protection: IP68 (dust-tight, waterproof)
• Certifications: SAE J575 shock/vibration, RoHS
• Protections: Over/under voltage, reverse polarity, RFI/EMI
• Thermal Management: Integrated system
• Lifespan: 50,000+ hours
• Connector: Waterproof (see exclusions)

The Rigid Industries SR-Series PRO 20-inch LED light bar delivers extreme long-range lighting in a compact, single-row design that stands under 2 inches tall. Its spot/drive combo optics combine a focused spot beam for distance with a broader drive pattern for peripheral coverage, making it ideal for off-road trucks, UTVs, agricultural equipment, marine vessels, and any installation where space is limited and high output is critical.

Engineered with Rigid’s latest LED technology, this bar produces up to 111% more raw lumens than previous generations while drawing minimal current. The extruded aluminum housing, available in black or white UV-resistant powder coat, houses an impact-resistant polycarbonate lens sealed to IP68 against dust and water. An integrated thermal management system, over/under voltage protection, and reverse polarity protection ensure reliable 9-36 V DC operation. A waterproof connector (exclusions apply) and SAE J575 shock/vibration compliance round out the rugged build.

• Beam pattern: Spot/Drive Combo
• Length: 20 inches
• Height: under 2 inches
• Housing: High-grade aluminum alloy, UV-resistant powder coat
• Lens: Impact-resistant polycarbonate
• LED lifespan: 50,000+ hours
• Input voltage: 9-36 V DC
• IP68 dust/water ingress rating
• SAE J575 shock/vibration compliant
• Waterproof connector (exclusions apply)
• Integrated thermal management
• Over/under voltage protection
• Reverse polarity protection
• RFI/EMI protection
• RoHS compliant

Built for drivers who need legal auxiliary high-beam lighting on paved roads, the Rigid Industries SR-Series 20-inch LED driving light delivers long-range clarity without sacrificing street legality. The patented Clarilux™ optic system shapes a precise output spread and daylight-like color temperature that cuts through darkness, while the toggleable amber backlight adds visibility and style—run independently or with the main beam.

• SAE J581 compliant for on-road auxiliary high-beam use
• Multi-function design with Rigid branding plate
• High-grade aluminum alloy housing with integrated oversized heatsink
• Impact-resistant polycarbonate lens
• IP68 rated against dust and water ingress
• 50,000-hour LED lifespan
• Wide 9-36 VDC operating range with over/under voltage protection
• RFI/EMI shielding and pressure-equalizing vent

Street-legal auxiliary high beam lighting in a 20-inch single-row LED bar. The SR-Series dual-function design combines long-range forward projection with an independently controlled backlit Rigid branding plate, so you can run it alone or alongside the main beam.

• SAE J581 compliant for on-road use as an auxiliary high beam
• Multi-function: forward high beam and backlit Rigid logo plate
• High-grade alloy housing with integrated heat sink and thermal management
• Impact-resistant polycarbonate lens
• IP68 dust- and water-ingress protection
• Patented optics produce a precise spread and height for clear roadway visibility
• 9–36 VDC operation with over/under voltage and RFI/EMI protection
• Pressure-equalizing vent prevents lens fogging
• White LED, rated for up to 50,000 hours

Includes installation instructions.

The SR-Series PRO 20-inch LED light bar delivers a low-profile, single-row design under 2 inches tall, now with up to 111% more raw lumens from improved LEDs. The spot/flood combo beam uses hybrid or Specter optics to project extreme long-range and wide-area illumination, making it ideal for off-road, industrial, agricultural, and marine applications where space is tight and power draw is minimal.

• Extruded aluminum housing with black or white UV-resistant powder coat
• Impact-resistant polycarbonate lens
• IP68 dust/water ingress protection; SAE J575 shock/vibration compliant
• Integrated thermal management, over/under voltage, and reverse polarity protection
• 9-36V DC, 50,000+ hour LED lifespan, RFI/EMI and RoHS compliant
• Waterproof connector (exclusions apply) and installation instructions included

The Rigid Industries 20-inch SR-Series PRO Spot Midnight Edition LED light bar combines aggressive stealth styling with serious long-range illumination. Featuring Rigid’s Midnight Optics — a translucent black enamel coating over patented Hybrid Spot reflectors — this bar nearly vanishes during the day yet unleashes powerful LED output when darkness falls. The PRO series technology pushes even more light downrange than previous Midnight Edition models, giving you confidence on the trail, worksite, or empty highway.

Every detail of the Midnight Edition is blacked out, from the special polymer-coated circuit board to the stainless steel mounting hardware. The single-row, 20-inch aluminum housing is treated with a UV-resistant powder coat and built around an impact-resistant polycarbonate lens. Rigid backs the light with advanced circuit protections and a thermal management system that keeps output consistent in demanding conditions.

• 20-inch single-row LED light bar with spot beam pattern
• Translucent black enamel over Rigid’s patented Hybrid Spot optics — disappears during daylight
• Special black polymer-coated circuit board and all-black assembly hardware
• Impact-resistant polycarbonate lens; durable UV-resistant powder coat finish
• High-grade aluminum alloy housing with integrated thermal management
• Over/Under Voltage Protection; Reverse Polarity Protection; RFI/EMI Protection
• Operating voltage: 9-36V DC
• LED lifespan: 50,000+ hours

The RIGID SR-Q PRO LED light is a compact, low-profile lighting solution that packs a serious punch. With upgraded LEDs that deliver up to 102% more raw lumens than previous generations, this driving beam pod is an excellent choice for applications where vertical space is limited. The single-row design and multiple beam patterns make it versatile for auxiliary lighting on trucks, SUVs, UTVs, and more.

• Beam Pattern: Driving
• Housing Color: White
• Single light pod
• 9-36 V DC operation for a wide range of vehicles
• IP68 rated – dust-tight and protected against water immersion
• Impact-resistant polycarbonate lens
• High-grade aluminum alloy housing with UV-resistant powder coat
• Integrated thermal management system
• SAE J575 compliant for shock and vibration
• Over/under voltage and reverse polarity protection
• RFI/EMI protection, RoHS compliant
• 50,000+ hour LED lifespan
• Waterproof connector (exclusions apply)

Whether you need a spotlight for long distance or a flood for close-area coverage, this driving beam provides a balanced pattern ideal for all-around visibility. Backed by RIGID's legendary build quality, the SR-Q PRO helps you Own The Night.

The Rigid Industries SR-M PRO Driving LED light delivers compact, high-output illumination in one of the smallest housings Rigid offers. Using improved LED technology, it produces up to 111% more raw lumens compared to previous generations, making it suitable for everything from motorcycle handlebar mounts to back bumper lighting and powersports applications. Its durable construction and advanced protection features ensure reliable performance in harsh conditions.

• Up to 111% more lumens over earlier models
• High-grade aluminum alloy housing with UV-resistant powder coat
• Impact-resistant polycarbonate lens
• IP68 rated — dust-tight and protected against water immersion
• Compliant with SAE J575 for shock and vibration resistance
• Integrated thermal management system
• Over/under voltage protection and reverse polarity protection
• RFI/EMI protection
• 9-36V DC operating voltage
• 50,000+ hour LED lifespan
• RoHS compliant
• Waterproof connector (exclusions apply)

The Rigid Industries SR2-Series 10-inch single-row LED light bar delivers a powerful, low-profile lighting solution that stands less than 2 inches tall. Its Combo beam pattern pairs a Drive beam for long-range coverage with a Hyperspot beam for intense distance projection, making it ideal for off-road, agricultural, industrial, and marine use where space is tight. Advanced LED technology pushes output up to 111% more raw lumens compared to earlier generations, all while drawing minimal power.

Key Features:

• IP68 rated for complete dust and water ingress protection
• Impact-resistant polycarbonate lens
• High-grade aluminum alloy housing with durable UV-resistant powder coat (available in black or white)
• Integrated thermal management system prevents overheating
• Over/under voltage and reverse polarity protection
• SAE J575 compliant for shock and vibration resistance
• 50,000+ hour LED lifespan
• RFI/EMI protection
• RoHS compliant
• 9-36V DC operating range
• Includes waterproof connector (exclusions apply)

Like all Rigid Industries lighting, the SR2-Series is built for reliable, efficient performance in punishing conditions. Rigid Industries part number 911313.

The Rigid Industries 10-inch SR2-Series Drive LED light bar packs intense, long-distance illumination into a slim single-row design that stands under 2 inches tall. Engineered for off-road, utility, and marine applications where mounting space is tight, it delivers powerful, efficient lighting with minimal current draw.

Its extruded aluminum housing is protected by a durable UV polyester powder coat, while the impact-resistant polycarbonate lens stands up to debris. The Drive beam pattern uses Rigid's advanced optics to project light far down the trail or road while maintaining a smooth, usable spread. Robust construction and intelligent onboard electronics ensure reliable performance in harsh conditions.

Key Features & Specifications:

• 10-inch single-row LED configuration
• Drive beam pattern for maximum distance
• Extruded high-grade aluminum alloy housing with UV polyester powder coat
• Impact-resistant polycarbonate lens
• Integrated thermal management system
• Over/under voltage protection
• Reverse polarity protection
• RFI/EMI protection
• SAE J575 compliant for shock and vibration
• RoHS compliant
• Waterproof connector (exclusions apply)
• 50,000+ hour LED lifespan
• Operating voltage: 9-36V DC
• Part number: 910613

Rigid Industries' 10-inch SR-Series PRO light bar packs spot and flood optics into a slim single-row housing that stands less than 2 inches tall. Designed for off-road rigs, industrial equipment, agricultural machinery, and marine applications where mounting space is tight, it throws a powerful combo beam across extreme distances while drawing minimal current.

Upgraded LEDs push raw lumen output up to 111% higher than earlier SR-Series bars. The extruded aluminum body carries a UV- and corrosion-resistant powder coat in your choice of black or white, while the impact-resistant polycarbonate lens seals against moisture and debris. Behind the lens, a blacked-out circuit board adds a refined look and prominent branding.

Key specifications:

• Waterproof Connector (exclusions apply)
• Integrated Thermal Management System
• SAE J575 Compliant – Shock/Vibration
• Impact Resistant Polycarbonate Lens
• IP68 Compliant – Dust/Water Ingress
• Durable UV Resistant Powder Coat
• Over/Under Voltage Protection
• Reverse Polarity Protection
• High-Grade Aluminum Alloy
• 50,000+ Hour Lifespan
• RFI/EMI Protection
• RoHS Compliant
• 9-36 V DC operating range

Engineered for demanding environments, the SR-Series PRO remains reliable under heavy shock, voltage swings, and RF noise, ensuring you have light when you need it most.

Rigid Industries’ 10-inch SR Series spot light in Midnight Edition brings a stealth black appearance without sacrificing lighting performance. The translucent black enamel on the patented hybrid spot optics virtually disappears against a dark background during the day, while advanced LED technology produces a powerful, focused beam at night. Upgraded circuitry and thermal management ensure consistent output and long-term reliability.

Built from high-grade aluminum alloy with a UV-resistant powder coat and an impact-resistant polycarbonate lens, this light is engineered to withstand harsh conditions. All mounting hardware and bracketry receive the same black finish to maintain the clean, covert look.

• Patented hybrid spot optics with translucent black enamel for daytime stealth
• Special black polymer coated circuit board
• High-grade aluminum alloy housing with durable UV-resistant powder coat
• Impact-resistant polycarbonate lens
• Integrated thermal management system
• Over/under voltage protection
• Reverse polarity protection
• RFI/EMI protection
• 9–36 V DC operating voltage
• 50,000+ hour LED lifespan
• All black assembly hardware included
• Rigid Industries Part Number: 910213BLK

The Rigid Industries SR-Series PRO 10-inch LED light bar delivers a slim, single-row lighting solution that stands under 2 inches tall, making it ideal for tight mounting locations on off-road rigs, industrial equipment, and marine vessels. Upgraded LED technology pushes up to 111% more raw lumens than earlier generations, while the flood beam pattern provides wide, even illumination for trail riding, work areas, or campsite setup.

Extruded from high-grade aluminum alloy and finished with a durable powder coat, the housing resists corrosion and UV damage. The impact-resistant polycarbonate lens seals against dust and water ingress to IP68 standards, and the integrated thermal management system keeps output stable during extended use. Blacked-out circuit boards and prominent Rigid branding complete the refined look.

• Flood beam pattern
• Single-row LED configuration
• Overall height: under 2 in.
• Up to 111% more raw lumens (vs. previous SR-Series)
• Extruded aluminum housing with UV-resistant powder coat
• Impact-resistant polycarbonate lens
• IP68 certified – dust tight and water immersion protected
• SAE J575 compliant – shock and vibration tested
• Integrated thermal management
• 9–36 V DC input with over/under voltage and reverse polarity protection
• RFI/EMI protection
• 50,000+ hour LED lifespan
• RoHS compliant
• Waterproof connector (exclusions apply)
• Rigid part number: 910113

Whether you’re tackling nighttime trails, securing a work site, or navigating open water, the SR-Series PRO flood bar projects reliable, efficient light with minimal power draw.

The Rigid Industries SR-Series 6-inch SAE Light Bar with Amber PRO Lens delivers street-legal performance and superior visibility in dust, smoke, and other low-visibility conditions. The amber output leverages the eye’s natural sensitivity to longer wavelengths, cutting glare and improving contrast so you can see farther than with traditional white lighting.

Built around a single row of LEDs in a low-profile housing under 2 inches tall, this pair of light bars combines a refined look with heavy-duty construction. An aluminum alloy housing and heatsink manage heat, while the blacked-out circuit board and prominent RIGID branding add a clean aesthetic. Each bar is fully sealed and tested to meet SAE compliance for on-road use, yet equally capable off-road.

• Amber PRO Lens for enhanced definition and reduced glare in adverse conditions
• SAE-compliant beam pattern is street-legal and usable on- and off-road
• IP68 dust/water ingress protection — fully submersible
• Pressure equalizing vent prevents moisture buildup
• Over/under voltage protection and reverse polarity protection safeguard the circuit
• Alloy housing and integrated heatsink for thermal management
• Patented optics ensure precise beam control
• Wide 9-36V DC operating range, 50,000-hour LED lifespan
• Limited lifetime warranty
• Sold as a pair with installation instructions included
• Rigid Industries part number 906705

Pair of 6-inch Rigid Industries SR-Series Pro SAE/DOT compliant fog lights with Selective Yellow LED output. Designed to provide legal on-road auxiliary lighting that excels in adverse conditions, these lights produce a broad, controlled beam pattern optimized for fog, dust, snow, and rain.

• Selective Yellow LED light – ideal for fog, dust, snow, and rain
• SAE J583 compliant – street legal LED fog light
• High-grade alloy housing with integrated heat sink and thermal management
• Impact-resistant polycarbonate lens
• IP68 rated for dust and water ingress protection
• Over/under voltage protection and pressure equalizing vent
• 9-36 VDC operation with RFI/EMI protection
• Patented optics with 50,000-hour LED lifespan

Each light uses a low-profile design that mounts to factory or aftermarket fog light locations (brackets not included unless specified). The Selective Yellow color temperature cuts through precipitation and airborne particles for improved contrast and reduced glare compared to white light.

Rigid Industries part number 906704. Sold as a pair.

The Rigid Industries SR-Series 6-inch fog light delivers street-legal SAE J583 compliant white LED output for on-road use. Its patented optics produce a tightly controlled beam pattern with pure daylight color temperature, projecting long-range intensity while drawing minimal power. The low-profile design and advanced heat sink ensure durability and clean integration.

• SAE J583 compliant for on-road fog light use
• White LED with patented optics for precise output spread and height
• High-grade alloy housing and heat sink with integrated thermal management
• Impact-resistant polycarbonate lens
• Durable UV polyester powder coat finish
• IP68 rated—dust-tight and protected against water immersion
• Over/under voltage protection and reverse polarity protection
• Pressure equalizing vent
• Operates on 9-36 VDC
• Up to 50,000-hour LED life

The Rigid Industries 6-inch SR-Series PRO Drive LED light bar (2-pack) offers a compact, single-row design that excels in tight spaces. Engineered to project light at extreme distances, these bars use advanced LEDs that deliver up to 111% more raw lumens than previous generations, all while drawing minimal power. The Drive beam pattern provides a focused, long-reaching beam ideal for high-speed off-road driving, open terrain, and demanding visibility needs.

Built on an extruded aluminum frame with a durable UV-resistant powder coat, the SR-Series PRO resists corrosion, impact, and vibration. An IP68-rated, waterproof design and military-grade sealed connectors (exclusions may apply) ensure reliable operation in dust, mud, and water. Integrated thermal management and polarity protection safeguard the electronics, while blacked-out circuit boards give a refined look.

• 2-pack of 6-inch single-row LED light bars
• Drive beam pattern for extreme distance
• Up to 111% more raw lumens vs. earlier models
• Extruded aluminum housing with UV-resistant powder coat
• Impact-resistant polycarbonate lens
• IP68 dust/water ingress protection
• Waterproof connector (exclusions apply)
• Integrated thermal management system
• Over/under voltage and reverse polarity protection
• SAE J575 shock/vibration compliant
• RFI/EMI and RoHS compliant
• 50,000+ hour LED lifespan
• Operating voltage: 9-36V DC

Whether you're running an off-road rig, a commercial fleet, or a marine application, the SR-Series PRO delivers consistent, high-output lighting backed by Rigid's build quality. Part number 906613.

The Rigid Industries SR-Series PRO 6-inch LED light bar delivers a low-profile single-row design under 2 inches tall, suitable for tight mounting areas on off-road, agricultural, industrial, or marine equipment. Its diffused optics create a wide flood pattern for broad, even illumination. An extruded aluminum housing with durable powder coat finish houses advanced LEDs, driven by an integrated thermal management system that maintains output over a 50,000+ hour lifespan. A waterproof connector and sealed IP68 construction keep out dust and moisture, while the polycarbonate lens resists impacts and UV yellowing. The bar operates on 9–36V DC and includes over/under voltage and reverse polarity protection.

• High-grade extruded aluminum alloy body, powder coated for UV resistance
• Impact-resistant polycarbonate lens with UV inhibitors
• IP68 dust/water ingress protection; SAE J575 compliant for shock and vibration
• 9–36V DC operational voltage; over/under voltage and reverse polarity protection
• Waterproof wiring connector (exclusions apply); RFI/EMI shielding
• Integrated thermal management system for consistent output
• RoHS compliant; 50,000+ hour rated lifespan

Rigid Industries' 6-inch SR-Series PRO LED Light Bar delivers a compact, single-row lighting solution under 2 inches tall, making it ideal for tight mounting spaces on off-road rigs, agricultural equipment, marine vessels, and industrial vehicles. The spot/flood combo optic projects a blended beam for both long-distance reach and wide-area coverage, helping you see farther down the trail while maintaining trail-side visibility.

Compared to earlier SR-Series models, this PRO version pumps out up to 111 percent more raw lumens thanks to upgraded LED emitters and refined optics. The extruded aluminum housing is finished with a UV-resistant powder coat to withstand harsh outdoor conditions, and the impact-resistant polycarbonate lens protects the LEDs from debris and stone strikes.

• Waterproof Connector (Exclusions Apply)
• Integrated Thermal Management System
• SAE J575 Compliant - Shock/Vibration
• Impact Resistant Polycarbonate Lens
• IP68 Compliant - Dust/Water Ingress
• Durable UV Resistant Powder Coat
• Over/Under Voltage Protection
• Reverse Polarity Protection
• High-Grade Aluminum Alloy Housing
• 50,000+ Hour LED Lifespan
• RFI/EMI Protection
• RoHS Compliant
• Wide 9-36 V DC Operating Range

All Rigid SR-Series PRO lights include a waterproof connector and integrated thermal management to maintain consistent output in demanding environments. The light bar is engineered to resist shock, vibration, and weather extremes, making it a reliable lighting upgrade for work or play.

The 6-inch SR-Series Midnight Edition spot light from Rigid Industries delivers a concentrated long-range beam with a stealthy all-black appearance. Translucent black enamel over patented hybrid spot optics creates the midnight effect, while upgraded LED technology provides more light output than ever. Built with a high-grade aluminum alloy housing, impact-resistant polycarbonate lens, and durable UV-resistant powder coat, this light is engineered to handle tough off-road conditions.

Key features:

• Translucent black enamel on patented hybrid spot optics
• Special black polymer coated circuit board
• Integrated thermal management system
• Impact-resistant polycarbonate lens
• Durable UV-resistant powder coat finish
• High-grade aluminum alloy housing
• All black assembly hardware
• Over/under voltage protection
• Reverse polarity protection
• RFI/EMI protection
• 9-36V DC operation
• 50,000+ hour LED lifespan

Designed for off-road use, the Midnight Edition provides powerful illumination while almost disappearing during the day.

The Rigid Industries 6-inch SR-Series Pro Spot LED light bar combines a single-row, low-profile design with a tightly focused spot beam for maximum distance. Less than 2 inches tall, it fits where larger bars can’t, making it ideal for off-road rigs, agricultural equipment, industrial machinery, and marine applications. Upgraded LEDs push output up to 111% beyond previous SR-Series bars, while a robust electrical system accepts 9–36V DC and safeguards against overvoltage, undervoltage, and reverse polarity.

• 6-inch single-row LED light bar with spot beam pattern
• Extruded aluminum housing with UV-resistant powder coat (available in black or white)
• Impact-resistant polycarbonate lens
• IP68 dust-tight and water-immersion protection
• SAE J575 vibration/shock certified
• Integrated thermal management system
• Waterproof connector (exclusions apply)
• 9–36V DC input; over/under voltage and reverse polarity protection
• RFI/EMI protection and RoHS compliance
• 50,000+ hour LED lifespan

Hardware and wiring harness included. Backed by Rigid Industries' commitment to durable, reliable lighting.

The Rigid Industries SR-Series PRO 6-inch Flood LED Light Bar (single) delivers intense, wide-beam illumination in a compact profile less than 2 inches tall. Designed around a single row of high-output LEDs, this bar uses patented Specter optics to project a flood pattern ideal for close- to mid-range visibility. Extruded aluminum housing with a UV-resistant powder coat and blacked-out circuit boards ensures durability and a clean, low-profile look.

Upgraded LED technology provides up to 111% more raw lumens than previous generations, while integrated thermal management and wide 9-36V DC input make it suitable for off-road, marine, industrial, and agricultural applications. Every housing is IP68 rated against dust and water, and the impact-resistant polycarbonate lens stands up to shock and vibration per SAE J575.

• Waterproof connector (exclusions apply)
• Integrated thermal management system
• SAE J575 compliant – shock and vibration
• Impact-resistant polycarbonate lens
• IP68 rated – dust and water ingress
• UV-resistant powder coat (black or white)
• Over/under voltage protection
• Reverse polarity protection
• High-grade aluminum alloy extrusion
• 50,000+ hour LED lifespan
• RFI/EMI protection
• RoHS compliant
• 9-36V DC operating range

Rigid Industries SR-Q Series PRO Midnight Edition LED light pods deliver powerful illumination with a stealthy blacked-out appearance. This pair features a hybrid spot/diffused beam pattern for balanced long-range and wide coverage, all dressed in a translucent black enamel that keeps the lights nearly invisible during the day. Upgraded PRO LED technology provides more light output than previous models.

Engineered for durability, each pod is built around a high-grade aluminum alloy housing with a UV-resistant powder coat, impact-resistant polycarbonate lens, and a black polymer-coated circuit board. Integrated thermal management, reverse polarity protection, and over/under voltage safeguards ensure reliable operation in 9-36V electrical systems. RFI/EMI protection eliminates radio interference.

• Translucent black enamel hybrid spot/diffused optics
• Black polymer-coated circuit board
• Integrated thermal management
• Impact-resistant polycarbonate lens
• UV-resistant powder coat finish
• Over/under voltage protection
• Reverse polarity protection
• RFI/EMI protection
• All black assembly hardware
• High-grade aluminum alloy housing
• 50,000+ hour LED lifespan
• Operates on 9-36V DC

Part number: 905513BLK

Pair of white Rigid Industries SR-Q PRO spot beam LED lights. Designed with a low-profile, single-row layout, this compact auxiliary light delivers up to 102% more raw lumens than earlier SR-Q models—ideal for tight mounting locations. The spot beam pattern provides focused long-range illumination.

• Beam pattern: Spot
• Housing color: White
• Quantity: 2 lights
• Single row of advanced LEDs
• Waterproof connector (exclusions apply)
• Integrated thermal management system
• SAE J575 compliant – shock & vibration resistance
• Impact-resistant polycarbonate lens
• IP68 dust and water ingress protection
• UV-resistant powder coat finish
• Over/under voltage protection
• Reverse polarity protection
• High-grade aluminum alloy construction
• 50,000+ hour lifespan
• RFI/EMI protection
• RoHS compliant
• 9-36 V DC operating range

Backed by Rigid Industries' engineering and testing, these lights combine durability with professional-grade output for off-road, marine, or utility use.

Rigid Industries SR-Q PRO (P/N 904513) is a compact, low-profile LED light pod with a white housing and 60-degree diffused lens, ideal for applications where mounting space is limited. This single-row light puts out up to 102% more raw lumens than previous SR-Q models, making it a powerful auxiliary lighting upgrade for trucks, SUVs, boats, and off-road rigs.

Engineered for extreme environments, the SR-Q PRO features an impact-resistant polycarbonate lens, high-grade aluminum alloy housing with a UV-resistant powder coat, and a fully sealed construction rated IP68 against dust and water. Integrated thermal management, over/under voltage protection, reverse polarity protection, and RFI/EMI shielding keep it reliable over a 50,000+ hour lifespan.

Key Specifications

• 60° diffused beam pattern
• White powder-coated aluminum housing
• Single-row LED design
• Waterproof connector (exclusions apply)
• Integrated thermal management system
• SAE J575 compliant – shock & vibration tested
• Impact-resistant polycarbonate lens
• IP68 rated – protection against dust and water ingress
• UV-resistant powder coat finish
• Over/under voltage protection
• Reverse polarity protection
• High-grade aluminum alloy construction
• 50,000+ hour LED lifespan
• RFI/EMI protection
• RoHS compliant
• Operates on 9-36V DC electrical systems

The SR-Q PRO is designed for surface or flush mounting, and its slim profile fits almost any vehicle. Backed by Rigid’s rigorous engineering, this pod delivers years of dependable illumination.

The Rigid Industries SR-Q PRO LED light delivers high-output auxiliary lighting in a slim, single-row package designed for applications where vertical space is tight. This flood beam model produces a wide, evenly spread pattern well-suited for trail, work, or scene illumination. The white housing blends into lighter-colored vehicles and installations, and the updated internal circuitry and blacked-out circuit boards give it a refined professional appearance.

Built to withstand harsh conditions, the SR-Q PRO incorporates high-grade aluminum alloy construction with a durable UV- and corrosion-resistant powder coat. The impact-resistant polycarbonate lens and IP68-rated sealing block dust and water ingress, while the integrated thermal management system maintains reliable output across 9-36V DC electrical systems.

• Beam pattern: Flood
• Housing color: White
• Single light unit
• Low-profile single-row LED array
• High-grade aluminum alloy housing
• Durable UV-resistant powder coat
• Impact-resistant polycarbonate lens
• IP68 dust/water ingress protection
• SAE J575 vibration/shock compliant
• Integrated thermal management
• Over/under voltage and reverse polarity protection
• RFI/EMI protection
• RoHS compliant
• 50,000+ hour LED lifespan
• 9-36V DC operating range
• Waterproof connector (see exclusions)

Engineered for professional-grade auxiliary lighting, this SR-Q PRO pairs form and function without excess bulk.

This set includes two Rigid Industries SR-M driving lights with SAE J583 compliance for on-road auxiliary high-beam use. The compact pods combine patented optics, a durable alloy housing, and a polycarbonate lens to produce a daylight-colored beam that cuts through darkness without blinding oncoming traffic.

• SAE J583 compliant – legal for on-road driving light use in North America
• Patented optic system for precise long-range beam pattern
• High-grade alloy housing with integrated heatsink and thermal management
• Impact-resistant polycarbonate lens with UV polyester powder coat finish
• IP68 rated – sealed against dust and water immersion
• 9–36 VDC operation with over/under voltage and reverse polarity protection
• Pressure equalizing vent prevents moisture buildup
• White LED output; 50,000-hour lifespan
• Sold as a pair with mounting hardware

Rigid Industries SR-M lights draw minimal power while projecting intense, focused light. Every component, from the robust heatsink to the multi-protection circuitry, is built for long-term reliability on and off the pavement. Part number 902533.

The Rigid SR-M PRO Midnight Edition spot-diffused LED pods deliver powerful off-road lighting with a stealthy blacked-out appearance. The proprietary Midnight Optics use a translucent black enamel coating that virtually disappears during the day, while maintaining clear, high-output illumination when activated. Each pod houses advanced PRO-series LED technology for increased brightness, managed by an integrated thermal system to ensure consistent performance.

Key features and construction:

• Translucent black enamel on patented Hybrid Spot optics – provides diffused beam pattern
• High-grade aluminum alloy housing with durable UV-resistant powder coat
• Impact-resistant polycarbonate lens
• Special black polymer-coated circuit board for extra stealth
• Integrated thermal management system for optimal LED temperature control
• Reverse polarity and over/under voltage protection
• RFI/EMI protection circuitry
• Wide 9-36V DC operating range
• 50,000+ hour LED lifespan
• All-black assembly hardware included for a complete stealth install

These SR-M pods are sold as a pair, including mounting hardware. Ideal for off-road, marine, powersports, and utility applications where durable, stealthy lighting is a must.