Fits 2013-2016 BMW M5 Base models.

H&R Sport Springs are the premier upgrade for drivers looking to enhance both the aesthetics and handling of their F10 M5. By lowering the vehicle's center of gravity and reducing the fender well gap, these springs improve aerodynamics and provide a more aggressive stance. The progressive spring rate design ensures that while body roll is significantly reduced for better cornering, the superb ride quality and comfort of the BMW chassis are maintained.

Every H&R spring is manufactured in Germany using high-tensile 54SiCr6 spring steel. To ensure long-term performance and durability, these springs are shot-peened to increase service life and block-set so they will never sag. This kit replaces the factory springs and is designed to work with the vehicle's original dampening system.

• Material: High-tensile 54SiCr6 spring steel
• Construction: Shot-peened and block-set for durability and sag resistance
• Design: Progressive spring rate for a balance of comfort and performance
• Origin: Made in Germany
• Manufacturer Part Number: 50468

Fits 2004-2010 BMW 645Ci and 650i Coupe (E63) models equipped with Dynamic Drive (Non-Convertible).

H&R Sport Springs are the ideal solution for drivers looking to enhance vehicle handling and aesthetics without sacrificing ride comfort. By lowering the center of gravity, these springs reduce body roll and minimize fender well gap for a more streamlined, aggressive stance. Each spring is engineered with a progressive rate to provide superb ride quality during daily driving while firming up under load for better cornering performance.

• Manufactured from high-tensile 54SiCr6 spring steel for strength and reduced weight
• Shot-peened to increase service life and fatigue resistance
• Block set to ensure the springs maintain their original height without sagging
• Progressive spring design delivers a balance of comfort and performance
• Improves aerodynamics and fuel efficiency by reducing wind resistance
• Manufacturer Part Number: 50466
• Made in Germany

Fits 1997-2003 BMW 540i (E39) Base models (Sedan only).

H&R Sport Springs are engineered to lower your vehicle's center of gravity and reduce body roll for sharper, more responsive handling. By minimizing the fender well gap, these springs provide a more aggressive stance and improved aerodynamics. This kit utilizes a progressive spring rate design to ensure that while handling is improved, the ride quality remains comfortable for daily driving.

• Manufactured from high-tensile 54SiCr6 spring steel for strength and resiliency
• Shot-peened to increase service life and durability
• Fully block-set to prevent sagging or settling over time
• Lightweight design reduces unsprung weight
• Progressive spring rate maintains superb ride quality
• Precision-engineered and manufactured in Germany
• Manufacturer Part Number: 50464

Fits 2006-2010 BMW M5 Base.

H&R Sport Springs are the premier upgrade for owners looking to enhance both the performance and aesthetics of the E60 M5. This kit (MPN 50463) lowers the vehicle's center of gravity and reduces body roll to provide sharper handling characteristics. Engineered with a progressive spring rate design, these coils deliver improved cornering stability while maintaining the superb ride quality required for daily driving. Each spring is precision-crafted in Germany for maximum durability and resilience.

• Premium Materials: Manufactured from high-tensile 54SiCr6 spring steel for a lightweight yet strong construction.
• Advanced Processing: Shot-peened and block-set to extend service life and prevent sagging over time.
• Refined Stance: Reduces the fender well gap for a more streamlined look and lower wind resistance.
• Progressive Rate: Carefully tuned spring rates provide comfort during cruising and firmness during spirited driving.
• Origin: 100% made in Germany.
• Part Number: 50463

Fits 2007-2014 Mini Cooper S, John Cooper Works, and John Cooper Works GP models.

H&R Sport Springs (MPN: 50452) are engineered to enhance your vehicle's handling characteristics while providing a more aggressive, lowered stance. By reducing the fender well gap and lowering the center of gravity, these springs significantly decrease body roll and improve stability during spirited driving. The progressive spring rate design ensures that while cornering performance is sharpened, the vehicle maintains a high level of ride comfort for daily use.

Every H&R spring is manufactured in Germany using high-tensile 54SiCr6 spring steel. To ensure long-term reliability and performance, each spring is shot peened to increase service life and "block set" so the springs will not sag over time.

• Material: High-tensile 54SiCr6 spring steel
• Manufacturing: Shot peened for increased durability and block set to prevent sagging
• Design: Progressive spring rate for balanced comfort and performance
• Origin: Precision-made in Germany
• Part Number: 50452

Fits 2007-2014 Mini Cooper Base, S, John Cooper Works, Clubman, Coupe, and Roadster models.

H&R Sport Springs are designed to enhance your vehicle's handling and aesthetics by lowering the center of gravity and reducing the factory fender well gap. These springs feature a progressive spring rate design, which provides a balance between improved steering response and superb ride comfort. By reducing body roll and wind resistance, these springs make your Mini more streamlined and responsive during spirited driving.

Every H&R spring is precision-engineered and manufactured in Germany using high-tensile 54SiCr6 spring steel. To ensure long-term durability and performance, each spring is shot-peened to increase service life and block-set to prevent sagging. This kit is a direct-replacement upgrade that works with your existing suspension components to provide a more connected driving experience.

• Material: High-tensile 54SiCr6 spring steel
• Construction: Shot-peened and block-set for maximum durability
• Spring Type: Progressive rate design for comfort and performance
• Manufacturing: Engineered and made in Germany
• Function: Lowers center of gravity and reduces body roll
• Manufacturer Part Number: 50450

Fits 2007-2014 BMW X5 and X6 models equipped with self-leveling suspension, including Diesel (xDrive35d) and M variants.

H&R Sport Springs are engineered to deliver improved handling and a lower center of gravity while maintaining the ride comfort expected from a premium SUV. By reducing the fender well gap, these springs provide a more aggressive stance and improve the vehicle's aerodynamic profile. The progressive spring rate design ensures that the suspension remains supple during normal driving but firms up under load to significantly reduce body roll during cornering.

Every H&R spring is manufactured in Germany using high-tensile 54SiCr6 spring steel. To ensure long-term performance and reliability, the springs are shot-peened to increase service life and block-set to prevent sagging over time. This precision manufacturing results in a lightweight, strong, and resilient component that directly replaces the factory springs.

• Manufacturer Part Number: 50435-4
• Material: High-tensile 54SiCr6 spring steel
• Construction: Shot-peened and block-set for maximum durability
• Spring Design: Progressive rate for superior ride quality and handling
• Fitment Note: Specifically for models with rear self-leveling suspension
• Origin: Made in Germany

Fits select 2007-2014 BMW X5 and X6 models without self-leveling suspension, including diesel variants (E70/E71/E72 chassis).

H&R Sport Springs are designed to enhance your vehicle's handling and aesthetic by lowering the center of gravity and reducing the fender well gap. The progressive spring rate design provides a balance between performance and comfort, offering improved cornering stability and reduced body roll without sacrificing ride quality. Every spring is manufactured in Germany using high-tensile 54SiCr6 spring steel to ensure long-term resilience and precise performance.

• Lowered center of gravity for sharper handling and reduced body roll
• Progressive spring rate design for superior ride quality and comfort
• Manufactured from lightweight, high-tensile 54SiCr6 spring steel
• Shot-peened and block-set for increased durability and service life
• Direct fit replacement for factory springs on models without self-leveling
• Designed and manufactured in Germany
• Manufacturer Part Number: 50435-3

Fits select 2007-2014 BMW X5 and X6 models equipped with rear self-leveling systems (including M, Diesel, and ActiveHybrid variants).

H&R Sport Springs are engineered to enhance your BMW’s handling and stance by lowering the center of gravity and reducing body roll. Unlike linear springs, these feature a progressive spring rate design that maintains superb ride comfort during normal driving while providing increased firmness when the suspension is compressed under load. This results in a more streamlined profile with reduced wind resistance and a tighter fender-well gap.

Every H&R spring is manufactured in Germany using high-tensile 54SiCr6 spring steel. To ensure long-term durability and performance, each spring is shot-peened to increase service life by over 200% and is fully block-set so it will never sag or lose its original ride height. This specific kit (MPN: 50435-2) is designed for vehicles equipped with factory self-leveling/air suspension systems.

• Material: 54SiCr6 High-Tensile Spring Steel
• Design: Progressive Spring Rate
• Manufacturing: Shot-peened and block-set for maximum longevity
• Origin: Made in Germany
• Part Number: 50435-2

Fits select 2007-2014 BMW X5 and X6 models (w/o Self-Leveling / Incl. Diesel).

H&R Sport Springs are designed to enhance your vehicle's handling and stance by lowering the center of gravity and reducing the unsightly fender well gap. By decreasing body roll during cornering, these springs provide a more responsive and controlled driving experience. The progressive spring rate design is engineered to maintain superb ride quality and comfort during daily driving while stiffening under compression for better performance.

Each spring is manufactured from high-tensile 54SiCr6 spring steel to ensure lightweight strength and resilience. These components are shot-peened and block-set to extend service life and prevent sagging over time. Additionally, the lower ride height reduces wind resistance, which can lead to improved aerodynamic efficiency and fuel economy.

• Part Number: 50435
• Material: 54SiCr6 Spring Steel
• Construction: Shot-peened and block-set for durability
• Design: Progressive spring rate for balanced handling and comfort
• Origin: Made in Germany
• Fitment Note: Designed for vehicles without self-leveling suspension; includes Diesel models

Fits 2004-2010 BMW X3 (2.5i, 3.0i, 3.0si, and xDrive30i).

H&R Sport Springs are engineered to enhance the handling and appearance of the BMW X3 E83 chassis. By lowering the vehicle's center of gravity and reducing the fender well gap, these springs minimize body roll and improve stability during cornering. The progressive spring rate design ensures that ride quality remains comfortable during daily driving while providing increased firmness when the suspension is loaded. Additionally, the lowered ride height reduces wind resistance for a more streamlined profile.

• Manufactured from high-tensile 54SiCr6 spring steel
• Shot-peened for increased fatigue life and durability
• Block set to ensure the springs never sag or lose height
• Progressive rate design for a balance of comfort and performance
• Lightweight, strong, and resilient construction
• Made in Germany
• Manufacturer Part Number: 50433

Fits 1992-1998 BMW 325i, 325is, 328i, and 328is (E36) models produced after June 22, 1992. This kit is specifically designed for Sedan and Coupe models and is not for use on Cabrio/Convertible chassis.

H&R Race Springs are engineered for the high-performance enthusiast who demands maximum handling response and a significantly lower center of gravity. These springs provide the stiffness required for track-ready performance while balancing vehicle weight for improved control during aggressive cornering. Each spring is precision-wound from high-tensile 54SiCr6 spring steel, ensuring a lightweight yet incredibly strong component that maintains its performance characteristics over time.

• Uncompromised handling performance with maximum steering feedback.
• Crafted from 54SiCr6 spring steel for high strength and reduced unsprung weight.
• Shot-peened for extended service life and increased durability.
• Full block-setting ensures the springs will not sag or lose height.
• Engineered and manufactured in Germany for precise tolerances.
• Manufacturer Part Number: 50424-88

Fits 1992-1998 BMW 325i, 325is, 328i, and 328is (E36) models produced after June 22, 1992. This set is designed for Coupe and Sedan models; it does not fit Convertible (Cabrio) variants.

H&R OE Sport Springs are engineered for the enthusiast who wants to improve handling and control without the aggressive drop of a race spring. These springs provide a subtle lowering that reduces body roll and improves cornering stability while maintaining the superb ride comfort expected from a refined German chassis. By utilizing a progressive spring rate, H&R ensures that the ride remains compliant during normal cruising but firms up during spirited driving.

• Precision Engineering: Manufactured using high-tensile 54SiCr6 spring steel for maximum strength and resilience.
• Durability: Shot-peened to increase service life by over 200% and finished for corrosion resistance.
• Block Set: Every spring is fully compressed and released during manufacturing so it will never sag or lose its ride height.
• Performance: Progressive spring rates improve response and reduce dive under braking.
• Origin: Designed and manufactured in Germany.
• Part Number: 50424-55

Fits 2003-2008 BMW Z4 (2.5i, 3.0i, 3.0si, M Coupe, and M Roadster).

H&R Sport Springs are the premier upgrade for BMW Z4 owners looking to enhance both vehicle aesthetics and handling dynamics. These springs lower the vehicle's center of gravity and reduce the unsightly fender well gap for a more aggressive stance. Engineered with a progressive spring rate, they minimize body roll during cornering while maintaining a high level of ride comfort for daily driving. By reducing wind resistance, these springs also contribute to a more streamlined aerodynamic profile.

Crafted in Germany from high-tensile 54SiCr6 spring steel, each spring is shot-peened to increase service life and resistance to fatigue. The block-set design ensures the springs will not sag or lose their original height over time, providing a reliable, long-term suspension solution.

• Manufacturer Part Number: 50421
• Material: 54SiCr6 Spring Steel
• Manufacturing Process: Shot-peened and Block-set
• Spring Design: Progressive rate
• Origin: Made in Germany
• Benefits: Reduced body roll, improved handling, and lowered ride height

Fits 2001-2005 BMW 325xi Base.

H&R Sport Springs are engineered to enhance the handling and aesthetics of the E46 chassis by lowering the vehicle's center of gravity and reducing fender well gap. By utilizing a progressive spring rate design, these springs significantly reduce body roll during cornering while maintaining a compliant ride quality suitable for daily driving. The lowered profile also reduces wind resistance for improved aerodynamics.

• Manufactured from high-tensile 54SiCr6 spring steel for strength and resilience
• Shot-peened to increase service life and fatigue resistance
• Fully block set to ensure the springs will not sag or lose height
• Progressive spring rate provides a balance of comfort and performance
• Lightweight design reduces unsprung weight
• Engineered and manufactured in Germany
• Manufacturer Part Number: 50419

Fits 2002-2006 Mini Cooper S (R50/R53) models manufactured after March 1, 2002.

H&R Sport Springs are designed to enhance your Mini’s handling characteristics and aesthetics by reducing the fender well gap and lowering the center of gravity. These springs utilize a progressive rate design to improve stability and reduce body roll during cornering while maintaining a high level of ride comfort for daily driving. The lowered profile also reduces wind resistance for better aerodynamic efficiency.

Built for durability and performance, these springs are manufactured in Germany using high-tensile 54SiCr6 spring steel. Every spring is shot-peened to increase service life and block-set to prevent sagging over time, ensuring consistent ride height and performance for the life of the vehicle.

• Fits 2002-2006 Mini Cooper S (R50/R53) - After 3/1/02 production
• Lowers center of gravity for improved handling and reduced body roll
• Progressive spring rate design for superior ride quality
• Crafted from high-tensile 54SiCr6 spring steel
• Shot-peened and block-set for maximum durability and sag resistance
• Lightweight, strong, and resilient construction
• Made in Germany
• Manufacturer Part Number: 50416-2

Fits 2001-2006 BMW M3 (Base). These H&R Sport Springs are engineered to enhance your vehicle's handling and aesthetics by lowering the center of gravity and reducing fender well gap. Designed with a progressive spring rate, these springs minimize body roll during cornering while maintaining a high level of daily driving comfort.

Manufactured in Germany, every H&R spring is crafted from high-tensile 54SiCr6 spring steel. To ensure long-term durability and prevent sagging, each spring is shot-peened and heat-treated to a preset height. The result is a more responsive driving experience and a streamlined profile that reduces wind resistance.

• Lowers center of gravity for improved cornering and handling
• Progressive spring rate design balances performance with ride quality
• Constructed from lightweight 54SiCr6 spring steel
• Shot-peened and block-set for maximum longevity and resilience
• Precision engineered and manufactured in Germany
• Manufacturer Part Number: 50414

Fits 1989-1995 BMW 530i, 535i, and 540i (E34) sedans without self-leveling suspension; not for Touring models.

H&R Sport Springs are engineered to enhance your BMW's handling and aesthetics by reducing the fender well gap and lowering the center of gravity. The progressive rate design significantly reduces body roll during cornering while maintaining superb ride comfort for daily driving. By lowering the vehicle's height, these springs also reduce wind resistance for a more streamlined profile and improved efficiency.

Manufactured in Germany, every H&R spring is crafted from high-tensile 54SiCr6 spring steel. Each unit is shot-peened to increase service life by over 200% and block-set to ensure the springs never sag or lose their ride height over time. These springs are designed to work with factory or sport-tuned dampers to provide a functional, performance-oriented suspension upgrade.

• Manufacturer Part Number: 50413
• Material: 54SiCr6 High-Tensile Spring Steel
• Construction: Shot-peened and block-set for maximum durability
• Design: Progressive spring rate for a balanced ride/handling profile
• Origin: Made in Germany

Fits 1996-1999 BMW M3 Base (3.2L) E36 chassis, excluding Cabrio models.

H&R Race Springs are engineered for high-performance drivers who prioritize uncompromised handling and maximum road feedback. By lowering the vehicle's center of gravity and balancing weight distribution, these springs significantly reduce body roll and improve control during aggressive driving. Each spring is crafted in Germany from high-tensile 54SiCr6 spring steel to ensure long-term resilience and precision performance under demanding conditions.

• Precision-wound from 54SiCr6 spring steel for strength and weight savings
• Shot-peened and block-set to increase service life and prevent sagging
• Optimized spring rates for maximum handling performance and feedback
• Designed specifically for the E36 M3 3.2L (Non-Cabrio)
• Manufactured in Germany
• Manufacturer Part Number: 50412-88

Fits 1995-1999 BMW M3 E36 Base and Lightweight models (3.0L). Not for Cabriolet models.

H&R OE Sport Springs are engineered for the BMW E36 M3 enthusiast who wants to sharpen handling dynamics without compromising ride quality. These springs provide a subtle upgrade that reduces body roll and increases chassis control through a progressive spring rate, making the vehicle feel more planted during spirited driving while maintaining comfort for daily use.

• Precision Engineering: Manufactured from high-tensile 54SiCr6 spring steel for maximum strength and resilience.
• Manufacturing Excellence: Shot-peened to extend service life and block-set to ensure the springs never sag or lose their original height.
• Progressive Rate: Designed to provide a comfortable ride during normal cruising and firm up under load for better cornering performance.
• Lightweight Construction: High-quality materials allow for a lighter spring, reducing unsprung weight for better suspension response.
• Quality Standards: Engineered and manufactured in Germany to exacting tolerances.
• Manufacturer Part Number: 50410-55

Fits 1988-1990 BMW 325iX Base (E30 AWD).

H&R Sport Springs are engineered to improve the handling dynamics and aesthetics of the AWD E30 chassis. By lowering the vehicle's center of gravity and reducing the fender well gap, these springs significantly decrease body roll and improve responsiveness. The progressive spring rate design ensures a comfortable ride during daily driving while providing the necessary stiffness for spirited performance when cornering.

Each spring is manufactured in Germany using high-tensile 54SiCr6 spring steel. To ensure maximum durability and consistent performance, H&R springs are shot-peened to increase service life and then "block set," a process where the spring is fully compressed to ensure it never sags or loses its specified ride height over time.

• Manufacturer Part Number: 50409
• Material: High-tensile 54SiCr6 spring steel
• Shot-peened for 200% increased service life
• Progressive spring rate for balanced comfort and control
• Fully block set to prevent sagging
• Made in Germany

Fits 1987-1991 BMW 325i Base.

H&R Sport Springs are engineered to enhance your vehicle's handling while providing a more aggressive stance. By lowering the center of gravity and utilizing a progressive spring rate, these springs reduce body roll and minimize fender well gap without sacrificing ride comfort. The result is a more streamlined profile with improved cornering stability and steering response.

Built for durability and performance, these springs are manufactured in Germany using specialized 54SiCr6 spring steel. Each spring is shot-peened to increase service life and block-set to ensure it never sags or loses its original height over time.

• Reduces body roll and lowers center of gravity for better handling
• Progressive spring rate design maintains superb ride quality
• Manufactured from high-tensile 54SiCr6 spring steel
• Shot-peened and block-set for maximum durability and resilience
• Made in Germany
• Manufacturer Part Number: 50407

Fits 1985-1991 BMW 325e, 325i, and 325is (E30) Base models. Note: This kit is not compatible with Convertible (Cabrio) or All-Wheel Drive (ix) models.

H&R Super Sport Springs are engineered for the enthusiast who wants a more aggressive stance and improved handling without sacrificing ride quality. These high-tech progressive springs lower the vehicle's center of gravity to reduce body roll and improve cornering stability. Unlike standard springs, the progressive rate design ensures the suspension remains compliant during daily driving but firms up quickly during spirited maneuvers.

• Manufactured from high-tensile 54SiCr6 spring steel for strength and weight reduction
• Shot-peened construction increases service life by over 200%
• Precision block-set design ensures the springs will never sag or lose ride height
• Improved performance stance and reduced fender gap
• Designed and manufactured in Germany
• Manufacturer Part Number: 50406-77

Fits select 1985-1991 BMW 325e, 325i, 325is, and M3 (E30) models (Excluding Convertible and ix models).

H&R Sport Springs are engineered to deliver improved handling and a lower ride height while maintaining excellent ride comfort. By lowering the vehicle's center of gravity and reducing the fender well gap, these springs minimize body roll and provide a more streamlined appearance. The progressive spring rate design ensures the suspension remains compliant during daily driving but firms up under load for better stability in corners.

Each spring is manufactured in Germany from high-tensile 54SiCr6 spring steel. To ensure long-term durability and resistance to sagging, every spring is shot-peened and block-set. This kit is a direct replacement for factory springs and is designed to work with both OE and performance-valved shocks.

• Lowers center of gravity for improved handling and reduced body roll
• Progressive spring rate design for a balance of comfort and performance
• Manufactured from lightweight and resilient 54SiCr6 spring steel
• Shot-peened and block-set for maximum service life
• Made in Germany
• Manufacturer Part Number: 50406

Fits 2020-2024 BMW 228i xDrive and M235i xDrive Gran Coupe (F44) models equipped with or without Electronic Damper Control (EDC).

H&R Super Sport Springs are designed for the enthusiast who requires a more aggressive stance and increased handling performance than the standard Sport Spring line. These high-tech progressive springs significantly lower the vehicle's center of gravity, reducing body roll and improving turn-in response while maintaining a high level of ride comfort for daily driving.

By utilizing a progressive spring rate, H&R ensures that the suspension remains compliant over small road imperfections but firms up under heavy cornering loads. These springs are specifically engineered to work with the factory dampers of the F44 chassis, including the Electronic Damper Control system, to provide a functional, performance-oriented drop without sacrificing suspension geometry.

• Manufacturer Part Number: 50405-77
• High-tensile strength spring steel construction
• Progressive spring rate for balanced ride and handling
• Lowered center of gravity for improved cornering stability
• Compatible with factory EDC (Electronic Damper Control)
• Engineered and manufactured in Germany

Fits 1985-1991 BMW 318i, 318is, 325e, 325i, 325is, and M3 E30 models (Non Cabrio/Tuner Fitment).

H&R Race Springs are engineered for high-performance drivers who prioritize uncompromised handling and maximum chassis feedback. By lowering the vehicle's center of gravity and balancing weight distribution, these springs reduce body roll and improve overall control during aggressive driving and track use. Each spring is precision-crafted in Germany to provide a race-ready stance and performance profile.

• Material: High-tensile 54SiCr6 spring steel for maximum strength and reduced weight.
• Durability: Shot-peened to increase service life by over 200%.
• Manufacturing: Block-set to prevent sagging and ensure consistent ride height.
• Origin: Designed and manufactured in Germany.
• Part Number: 50404-88

Fits select 1985-1991 BMW 325e, 325i, 325is, and M3 (E30) models (excludes Cabrio and ix models).

H&R OE Sport Springs are engineered for the BMW enthusiast who wants to sharpen handling and control without compromising daily driveability. Designed to provide a subtle increase in performance, these springs reduce body roll and improve steering response while maintaining superb ride comfort. Each spring is precision-wound from high-tensile 54SiCr6 spring steel and undergoes shot-peening and block-setting to ensure a long service life and resistance to sagging.

• Manufactured from lightweight, high-strength 54SiCr6 spring steel
• Progressive spring rate design improves handling and performance
• Shot-peened for increased durability and service life
• Precision block-set to prevent sagging over time
• Subtle ride height adjustment for a fine-tuned appearance
• Made in Germany
• Manufacturer Part Number: 50404-55

Fits 1991 BMW 318i and 318is Base models (E30). Please note: This kit is not intended for use on Cabrio/Convertible models.

H&R Sport Springs are the premier upgrade for drivers looking to improve both the handling and stance of their vehicle. By lowering the center of gravity and reducing body roll, these springs provide a more responsive driving experience and a streamlined profile. Each spring is crafted from high-tensile 54SiCr6 spring steel, ensuring a lightweight yet resilient component that maintains its height and performance over time.

The progressive spring rate design is engineered to deliver superb ride quality during daily commuting while offering increased firmness for performance driving. Every H&R spring is shot-peened to extend service life and block-set to prevent sagging, ensuring consistent performance for the life of the vehicle.

• Manufactured from high-tensile 54SiCr6 spring steel
• Shot-peened and block-set for maximum durability and resistance to sagging
• Progressive spring design maintains comfort while improving cornering
• Reduced fender well gap for a more aggressive, streamlined appearance
• Made in Germany
• Manufacturer Part Number: 50404

Fits 2008-2013 BMW 128i and 135i (E82) models.

H&R OE Sport Springs are engineered for drivers who want a subtle performance upgrade without sacrificing ride quality. These springs provide a slight increase in handling precision and control by reducing body roll while maintaining a comfort level comparable to the original factory suspension. Designed as a direct replacement for worn OE components, they offer a refined, fine-tuned feel for daily driving.

Precision-manufactured in Germany, these springs utilize high-tensile 54SiCr6 spring steel. Every spring is shot-peened to increase service life by over 200% and is fully block-set to prevent sagging or settling over time. The progressive spring rate ensures a compliant ride during normal cruising while becoming firmer under load to improve cornering stability.

• Fits 2008-2013 BMW 1-Series (E82) 128i and 135i
• Material: High-tensile 54SiCr6 spring steel
• Manufacturing: Shot-peened and block-set for maximum durability
• Design: Progressive spring rate for balanced handling and comfort
• Origin: Made in Germany
• Manufacturer Part Number: 50402-55

Fits 1966-1976 BMW 2002 models, including Base, Cabriolet, and Turbo variants.

H&R Sport Springs are engineered to lower the center of gravity and reduce body roll for sharper handling and a more aggressive profile. These springs feature a progressive rate design that maintains street-friendly ride quality while reducing the fender well gap and improving aerodynamic efficiency at higher speeds. Manufactured in Germany, every spring is crafted from high-tensile 54SiCr6 spring steel and undergoes a shot-peening process to significantly extend service life.

• Manufacturer Part Number: 50401
• Material: 54SiCr6 Spring Steel
• Construction: Shot-peened and block-set to prevent sagging
• Design: Progressive spring rate for performance and comfort
• Origin: Made in Germany