Fits 2004-2014 Ford F-150 SuperCrew models (including FX2, FX4, King Ranch, Lariat, Platinum, SVT Raptor, XL, and XLT).

Go Rhino RB20 Slim Line Running Boards provide the heavy-duty protection of the original RB Series in a streamlined, low-profile design. Specifically engineered to sit tighter against the cab, these boards maximize ground clearance for off-road environments while offering a stable, full-length step for cab entry. Constructed from 16-gauge zinc-coated galvanized steel, the boards are finished with a durable, impact-resistant bedliner coating to defend against corrosion, abrasion, and trail debris.

This complete kit includes both driver and passenger side boards along with all necessary mounting brackets for a straightforward, no-drill installation using factory mounting points. The modern bullet-stamped design measures 5.5 inches at its widest point and tapers toward the rear for a clean, integrated look.

• Material: 16-gauge zinc-coated galvanized steel
• Finish: Textured Black Bedliner Coating
• Step Width: 5.5 inches at widest point
• Installation: Bolt-on, no-drill
• Manufacturer Part Number: 69415087ST
• Includes: Left and right boards, mounting brackets, and hardware
• Warranty: Limited Lifetime on materials/construction; 5-year on finish

Fits 2004-2014 Ford F-150 SuperCrew models across FX2, FX4, King Ranch, Lariat, Platinum, SVT Raptor, XL, and XLT trims.

The Go Rhino RB20 Slim Running Boards deliver the same heavy-duty, Raptor-inspired toughness as the original RB series but in a lower-profile design. Specifically engineered to sit tighter against the cab, these boards provide increased ground clearance for off-road environments while protecting your rocker panels from debris. Each board is constructed from corrosion-resistant 16-gauge zinc-coated galvanized steel and finished in a durable textured black powder coat to resist impact and abrasion.

Featuring a modern bullet-stamped design, these boards measure 5.5 inches at their widest point and taper toward the rear for a sleek, integrated look. The complete kit includes all necessary mounting brackets and hardware for a straightforward, no-drill installation using factory mounting points.

• Constructed from heavy-duty 16-gauge zinc-coated galvanized steel
• Raptor-inspired bullet-stamped platform for secure footing
• 5.5-inch wide step surface tapered for a slim, low-profile fit
• Protects vehicle panels from flying stones and debris
• No-drill installation using included vehicle-specific brackets
• Finish: Textured Black
• Manufacturer Part Number: 69415087SPC
• Warranty: Limited lifetime on materials; 5-year on finish

Fits 2004-2014 Ford F-150 Super Cab models including FX2, FX4, Lariat, STX, SVT Raptor, XL, and XLT.

Go Rhino RB20 Slim Running Boards deliver the aggressive, Raptor-inspired aesthetic of the original RB series in a lower-profile design. Measuring 5.5 inches at the widest point, the RB20 Slim sits closer to the cab than the standard model to maximize ground clearance for off-road use without sacrificing a secure stepping surface. These boards are engineered from 16-gauge zinc-coated galvanized steel to provide high-strength protection for your rocker panels against trail debris and road spray.

The kit features a corrosion-resistant textured black finish and includes vehicle-specific mounting brackets for a precise, no-drill installation using existing factory mounting points.

• Manufacturer Part Number: 69412680SPC
• Material: 16-gauge zinc-coated galvanized steel
• Finish: Textured Black
• Board Width: 5.5 inches (tapered design)
• Design: Slim-line, bullet-stamped platform
• Installation: Easy, no-drill application
• Included: Pair of running boards and mounting brackets
• Warranty: Limited Lifetime on materials/construction; 5-year on finish

Fits select 2019-2026 Chevrolet Silverado and GMC Sierra 1500, 1500 LTD/Limited, 2500 HD, and 3500 HD models across all trims including AT4, Denali, ZR2, and High Country.

The Go Rhino RB20 Slim Running Boards deliver the same aggressive styling and heavy-duty protection as the standard RB Series but with a narrower profile designed for off-road clearance. Tucking closer to the vehicle cab, these cab-length boards provide a 5.5-inch wide stepping surface to protect your rocker panels from debris while maximizing breakover angles. Constructed from 16-gauge zinc-coated galvanized steel and finished with a rugged bedliner coating, these boards are built to resist corrosion, impact, and abrasion in the toughest environments.

• Raptor-inspired bullet-stamped design provides superior traction and water drainage
• Constructed from heavy-duty 16-gauge zinc-coated galvanized steel
• Protective bedliner coating for maximum resistance to corrosion and impact
• Slim 5.5-inch width offers increased ground clearance compared to original 7.5-inch boards
• Includes vehicle-specific mounting brackets for a straightforward, no-drill installation
• Manufacturer Part Number: 69404887ST
• Warranty: Limited Lifetime on materials and construction; 5-year on finish

Fits 2019-2026 Chevrolet Silverado and GMC Sierra 1500, 2500 HD, and 3500 HD models (including LTD and Limited editions).

Go Rhino RB20 Slim Running Boards offer the heavy-duty protection and aggressive styling of the original RB Series in a lower-profile design. These Raptor-inspired boards are 5.5 inches at their widest point, tapering toward the rear to provide a tighter fit against the cab. This slimmer profile significantly improves ground clearance for off-road maneuvers while still providing a stable, full-length step for cab access.

Constructed from 16-gauge zinc-coated galvanized steel, these boards are engineered for impact and corrosion resistance. The modern bullet-stamped surface provides reliable traction and helps shield your vehicle's rocker panels from road debris and trail obstacles. The textured black powder coat finish adds an extra layer of abrasion resistance, ensuring long-lasting durability in harsh environments.

• Heavy-duty 16-gauge zinc-coated galvanized steel construction
• Slim 5.5-inch wide tapered design for increased ground clearance
• Textured black powder coat finish for maximum corrosion and impact resistance
• No-drill installation using factory mounting points
• Complete kit includes both driver and passenger side boards plus mounting brackets
• Manufacturer Part Number: 69404887SPC
• Limited Lifetime warranty on materials; 5-year warranty on finish

Fits select 1999-2026 Chevrolet Silverado, Dodge/Ram 1500/2500/3500, Ford F-150/F-250/F-350, GMC Sierra, and Toyota Tacoma/Tundra (Full fitment list below).

The Go Rhino RB20 Series provides a heavy-duty, Raptor-inspired side step solution for truck owners who prioritize both ground clearance and a massive stepping surface. Constructed from 16-gauge zinc-coated galvanized steel, these 87-inch boards are built to withstand heavy impacts and resist corrosion in harsh environments. The modern bullet-stamped louver design offers a 7.5-inch wide step at its widest point, tapering toward the rear for a sleek, aggressive profile that tucks high and tight against the rocker panels.

Finished in a rugged, impact-resistant bedliner coating, the RB20 protects your vehicle's body from road debris and provides maximum traction in wet or muddy conditions. These boards feature a welded, boxed-end design for added durability. Please note: this part number includes the running boards only; vehicle-specific mounting brackets are sold separately.

• Length: 87 inches
• Stepping Surface: 7.5 inches wide (tapered)
• Material: 16-gauge zinc-coated galvanized steel
• Finish: Rugged protective bedliner coating
• Design: Raptor-inspired louvered step with boxed ends
• Resistance: Impact, abrasion, and corrosion resistant
• Manufacturer Part Number: 69400087T

Fits select 1999-2026 Chevrolet, Ford, GMC, Ram, Dodge, and Toyota trucks. Provide your vehicle with heavy-duty protection and a secure step with the Go Rhino RB20 Slim Running Boards. These Raptor-inspired boards feature 16-gauge zinc-coated galvanized steel construction designed to withstand impact and corrosion in harsh off-road environments.

The RB20 Slim series offers a low-profile design that sits tighter to the cab than the original RB20, providing increased ground clearance for trail navigation. Each board features a modern bullet-stamped platform measuring 5.5 inches at its widest point, tapering toward the rear for a sleek, aggressive aesthetic. Finished in a rugged, protective bedliner coating, these 87-inch boards are engineered to resist abrasion and flying debris.

• 87-inch board length for cab-length coverage
• Slim 5.5-inch wide step surface for high-clearance applications
• Constructed from 16-gauge zinc-coated galvanized steel for maximum durability
• Textured bedliner coating for superior corrosion and impact resistance
• Includes bars only; vehicle-specific mounting brackets are sold separately
• Manufacturer Part Number: 69400087ST
• Warranty: Limited Lifetime on materials and construction; 5-year finish warranty

Fits select 1999-2026 Ford F-Series, Ram 1500/2500/3500, Chevrolet Silverado, GMC Sierra, and Toyota Tundra/Tacoma trucks. These RB20 Slim Series running boards offer the same heavy-duty cab protection as the original RB series but with a lower-profile design that sits tighter to the body for improved ground clearance during off-road use.

Constructed from 16-gauge zinc-coated galvanized steel, these Raptor-inspired side steps are built to resist corrosion, impact, and abrasion. The modern bullet-stamped platform provides a secure 5.5-inch wide stepping surface that tapers toward the rear of the cab. This specific part includes the bars only; mounting brackets are sold separately to ensure a custom fit for your specific vehicle application.

• Manufacturer Part Number: 69400087SPC
• Material: 16-gauge zinc-coated galvanized steel
• Finish: Textured Black powder coat
• Width: 5.5 inches at widest point (tapered design)
• Length: 87 inches
• Includes: Pair of running boards (bars only, brackets NOT included)
• Warranty: Limited Lifetime on construction; 5-year on finish

Fits select 1999-2026 Ford F-150/F-250/F-350, Chevrolet Silverado, GMC Sierra, Dodge/Ram 1500/2500/3500, and Toyota Tacoma/Tundra.

Go Rhino RB20 Series Running Boards deliver heavy-duty performance and Raptor-inspired styling to your truck's exterior. These cab-length steps are constructed from 16-gauge zinc-coated galvanized steel for superior corrosion resistance and impact protection. The 87-inch boards feature a wide 7.5-inch stepping surface that tapers toward the rear, providing a secure platform for entering and exiting the vehicle.

Designed for the trail, the perforated surface allows mud, snow, and debris to drain through, ensuring maximum traction in all weather conditions. The high-and-tight mounting profile provides essential ground clearance for off-road use, while the welded boxed-end design adds structural rigidity. Finished in a durable textured black powder coat, these boards offer an aggressive look that stands up to abrasion and harsh environments.

• Manufacturer Part Number: 69400087PC
• Material: 16-gauge zinc-plated galvanized steel
• Finish: Textured black powder coat
• Length: 87 inches
• Width: 7.5 inches at widest point
• Perforated surface for drainage and traction
• Bars only; mounting brackets not included
• Warranty: Limited Lifetime on construction; 5-year on finish

Go Rhino RB20 Running Boards provide a heavy-duty stepping surface inspired by the Ford Raptor’s iconic styling. These 80-inch boards are constructed from 16-gauge zinc-coated galvanized steel for exceptional corrosion, impact, and abrasion resistance. The protective bedliner coating adds a rugged texture that stands up to harsh off-road environments and debris.

Designed with a modern bullet-stamped pattern, the RB20 measures 7.5 inches at its widest point before tapering toward the rear, offering a generous step area for entering or exiting the vehicle. The Raptor-style louvers ensure maximum traction and allow mud and snow to pass through, keeping the stepping surface clear. These boards are designed to mount high and tight to the rocker panel, maintaining maximum ground clearance for trail performance.

• Fits select 1999-2026 Chevrolet Colorado/Silverado, Ford F-150/Super Duty/Ranger, GMC Canyon, Nissan Frontier, Ram 1500, and Toyota Tundra.
• Fabricated from 16-gauge zinc-coated galvanized steel for corrosion resistance.
• Rugged bedliner finish provides a non-slip surface and superior durability.
• 7.5-inch wide stepping area at the widest point for secure footing.
• Boxed end design for a finished, aggressive appearance.
• Includes: Pair of running boards (mounting brackets sold separately).
• Manufacturer Part Number: 69400080T.

Fits select 1999-2026 Chevrolet, Dodge, Ford, GMC, Nissan, Ram, and Toyota trucks and SUVs.

The Go Rhino RB20 Slim Running Boards provide the same heavy-duty cab protection and styling as the original RB Series but in a lower-profile design. These 80-inch boards are tapered to sit tighter against the vehicle body, maximizing ground clearance for off-road maneuvers while maintaining a functional step surface. Constructed from 16-gauge zinc-coated galvanized steel, they offer superior corrosion resistance and defense against trail debris.

Inspired by OE Raptor styling, the RB20 Slim features a modern bullet-stamped platform that measures 5.5 inches at its widest point. The textured black powder coat finish provides an aggressive look and additional grip in wet or muddy conditions. Please note: This kit includes the running board bars only; vehicle-specific mounting brackets are required for installation and sold separately.

• Manufactured from 16-gauge zinc-coated galvanized steel for impact and abrasion resistance
• Slim 5.5-inch wide design improves ground clearance over standard wide boards
• Raptor-inspired bullet-stamped design for modern aesthetics and slip resistance
• Textured black powder coat finish for durability
• Includes running board bars only (mounting brackets sold separately)
• Manufacturer Part Number: 69400080SPC
• Limited Lifetime warranty on materials; 5-year warranty on finish