Fits 2019-2026 Ram 1500 including Rebel, TRX, Laramie, Limited, and Tradesman models. These heavy-duty RB20 running boards provide a wide, secure stepping surface while maintaining high ground clearance for off-road performance.

Inspired by the aggressive styling of the Ford Raptor, the RB20 series features a modern bullet-stamped design constructed from 16-gauge zinc-coated galvanized steel. The boards are 7.5 inches wide at the front and taper toward the rear, providing ample footing where it is needed most. A rugged bedliner coating protects the steel from impact, abrasion, and corrosion in harsh environments. The perforated surface ensures maximum traction while preventing the accumulation of mud, ice, and snow on the step.

• Complete kit includes both running boards, vehicle-specific mounting brackets, and hardware.
• 16-gauge zinc-plated galvanized steel construction for superior rust resistance.
• Rugged bedliner finish provides a non-slip, high-durability surface.
• Bolt-on installation to factory mounting points with no drilling required on most models.
• High-and-tight fitment preserves off-road clearance and approach angles.
• 7.5-inch maximum width tapering toward the rear.
• Manufacturer Part Number: 69430687T.
• Warranty: Limited Lifetime on materials and construction; 5-year on bedliner finish.

Fits select 2019-2026 Ram 1500 models across all trims including TRX, Rebel, and Laramie.

Go Rhino RB20 running boards bring aggressive, Raptor-inspired styling to your truck with a cab-length stepping surface designed for off-road durability. These boards are constructed from heavy-duty 16-gauge zinc-coated galvanized steel, providing high-strength support and superior resistance to corrosion, impacts, and abrasion. The unique bullet-stamped perforated surface ensures maximum foot traction while allowing mud, snow, and ice to drain away, keeping the steps clear in harsh environments.

This complete kit includes two RB20 boards with a rugged bedliner finish, vehicle-specific mounting brackets, and additional drop steps to facilitate easier entry and exit, especially on lifted vehicles. The boards are designed to mount high and tight to the rocker panels, maintaining maximum ground clearance for trail obstacles without sacrificing accessibility.

• Material: 16-gauge zinc-coated galvanized steel
• Finish: Protective bedliner coating
• Step Width: 7.5 inches at the widest point
• Design: Bullet-stamped perforated traction surface
• Kit Includes: Running boards, mounting brackets, and drop steps
• Manufacturer Part Number: 6943068720T
• Warranty: Limited Lifetime on materials/construction; 5-year on bedliner finish

Fits 2019-2026 Ram 1500 including Big Horn, Laramie, Limited, Rebel, TRX, Tradesman, and Warlock.

The Go Rhino RB20 Running Board Kit delivers a Raptor-inspired, aggressive aesthetic while providing a high-clearance, heavy-duty stepping surface. Engineered for durability, these boards are constructed from 16-gauge zinc-coated galvanized steel for superior resistance to corrosion, impact, and abrasion. The wide 7.5-inch stepping surface features a bullet-stamped perforated design that offers maximum traction and prevents the accumulation of mud, ice, or snow.

This complete installation kit includes the RB20 boards, mounting brackets, and matching drop steps. The drop steps are specifically designed to make entering and exiting lifted vehicles safer and more convenient without sacrificing the high-and-tight fitment required for off-road ground clearance. The entire system bolts directly to factory mounting points for a secure, straightforward installation.

• Construction: 16-gauge zinc-coated galvanized steel
• Finish: Textured black powder coat for abrasion resistance
• Width: 7.5 inches at widest point, tapering toward the rear
• Kit Includes: RB20 running boards, vehicle-specific brackets, and drop steps
• MPN: 6943068720PC
• Warranty: Limited lifetime on materials/construction; 5-year on textured black finish

Fits select 2015-2026 Ford F-150, F-250 Super Duty, and F-350 Super Duty.

Go Rhino RB20 Running Boards deliver Raptor-inspired styling and heavy-duty side protection for your Ford truck. These cab-length steps are constructed from corrosion-resistant 16-gauge zinc-coated galvanized steel, engineered to handle the rigors of off-road use while providing a stable platform for entering and exiting the vehicle. The boards feature a signature bullet-stamped design with perforated holes that provide maximum traction and allow mud, snow, and debris to pass through rather than accumulating on the step surface.

Measuring 7.5 inches at the widest point before tapering toward the rear, these boards provide a generous stepping area without sacrificing ground clearance. The high-and-tight mounting profile ensures they stay out of the way of obstacles on the trail. This complete kit includes all necessary mounting brackets and hardware for a straightforward bolt-on installation on most models using existing factory mounting points.

• 16-gauge zinc-coated galvanized steel for superior impact and abrasion resistance
• Protective bedliner coating for a rugged, non-slip finish
• Modern tapered design inspired by OE Raptor running boards
• Bolt-on installation with no drilling required on most applications
• Manufacturer Part Number: 69415587T
• Limited Lifetime warranty on materials and 5-year warranty on finish

Fits select 2015-2026 Ford F-150, F-250, and F-350 Super Duty models including Raptor, Tremor, and King Ranch trims.

Go Rhino RB20 Running Boards bring Raptor-inspired styling and heavy-duty utility to your truck. These cab-length side steps are constructed from 16-gauge zinc-coated galvanized steel to provide superior corrosion, impact, and abrasion resistance. Designed for the off-road enthusiast, the boards mount high and tight to the rocker panels to maintain maximum ground clearance while protecting your vehicle from trail debris.

The wide, bullet-stamped design measures 7.5 inches at its widest point before tapering toward the rear, offering a secure stepping surface. Perforated holes throughout the board ensure traction in wet or muddy conditions while preventing the buildup of ice and snow. This complete kit includes both driver and passenger side bars along with vehicle-specific mounting brackets for a straightforward, no-drill installation on most applications.

• Manufacturer Part Number: 69415587PC
• Material: 16-gauge zinc-coated galvanized steel
• Finish: Textured Black Powder Coat
• Dimensions: 7.5 inches at widest point, tapered design
• Installation: Bolt-on mounting; no drilling required on most vehicles
• Warranty: Limited Lifetime on materials/construction; 5-year on finish
• Includes: Pair of running boards and complete mounting bracket kit

Fits select 2015-2026 Ford F-150 and 2017-2026 Ford F-250/F-350 Super Duty trucks. These Go Rhino RB20 running boards deliver a heavy-duty, Raptor-inspired aesthetic with the functional clearance needed for off-road environments. Constructed from 16-gauge zinc-coated galvanized steel and finished with a durable, protective bedliner coating, these steps are built to resist corrosion, impact, and abrasion.

The RB20 features a modern bullet-stamped design that provides a 7.5-inch wide stepping surface at its widest point, tapering toward the rear for a streamlined look. Perforated holes are punched into the surface to ensure maximum traction while preventing the accumulation of mud, ice, and snow. This complete kit includes matching RB20 drop steps to facilitate easier entry and exit on lifted vehicles, along with all necessary mounting brackets and hardware.

• Heavy-duty 16-gauge zinc-coated galvanized steel construction
• Protective bedliner coating for superior impact and corrosion resistance
• Aggressive Raptor-inspired bullet-stamped design for traction and drainage
• 7.5-inch wide stepping surface at its widest point
• Includes vehicle-specific mounting brackets and drop steps
• Manufacturer Part Number: 6941558720T
• Limited lifetime warranty on materials; 5-year warranty on bedliner finish

Fits select 2009-2025 Dodge and Ram 1500, 2500, and 3500 trucks across various trims including Laramie, SLT, Sport, Tradesman, and Power Wagon.

Go Rhino RB20 Running Boards deliver heavy-duty cab-length protection and a secure stepping surface inspired by the styling of the Ford Raptor. Constructed from 16-gauge zinc-coated galvanized steel, these boards are engineered for impact and abrasion resistance in harsh off-road environments. The bullet-stamped perforated surface provides maximum traction underfoot while preventing the accumulation of mud, snow, and ice.

The RB20 features a tapered design, measuring 7.5 inches at its widest point for easy entry and exit. These steps are designed to mount high and tight against the rocker panels to preserve ground clearance during off-road maneuvers. This complete kit includes all vehicle-specific mounting brackets and hardware for a straightforward bolt-on installation that typically requires no drilling.

• Heavy-duty Raptor-inspired design with a protective bedliner coating
• Fabricated from 16-gauge zinc-coated galvanized steel for superior corrosion resistance
• 7.5-inch wide stepping surface tapers toward the rear of the cab
• Perforated holes provide drainage and enhanced grip
• Complete kit including passenger and driver side boards with mounting brackets
• Manufacturer Part Number: 69410687T
• Warranty: Limited Lifetime on materials/construction; 5-year on Bedliner Finish

Fits select 2009-2025 Dodge and Ram 1500, 2500, and 3500 models. These Go Rhino RB20 Slim Running Boards offer the heavy-duty toughness and shielding of the original RB series but with a lower-profile design. This slim configuration sits tighter against the cab, providing increased ground clearance for off-road maneuvers while maintaining a secure step platform.

Constructed from 16-gauge zinc-coated galvanized steel, these Raptor-inspired boards are engineered to protect your rocker panels from flying debris and impact. The bullet-stamped surface measures 5.5 inches at its widest point and tapers toward the rear for a modern, aggressive look. Each board is finished with a protective bedliner coating for maximum resistance against corrosion, abrasion, and harsh environmental conditions.

• Material: 16-gauge zinc-coated galvanized steel
• Finish: Protective bedliner coating (Textured Black)
• Width: 5.5 inches at the widest point
• Installation: Easy, no-drill installation using included vehicle-specific brackets
• Construction: Bullet-stamped, Raptor-inspired slim design
• Warranty: Limited Lifetime on materials/construction; 5-year on finish
• Manufacturer Part Number: 69410687ST

Fits select 2009-2025 Dodge and Ram 1500, 2500, and 3500 pickups. These Go Rhino RB20 cab-length running boards deliver an aggressive, Raptor-inspired look while providing a wide, secure stepping surface for daily utility and off-road use.

Constructed from heavy-duty 16-gauge zinc-coated galvanized steel, these boards are built to withstand impact, abrasion, and corrosion. The modern bullet-stamped design measures 7.5 inches at its widest point before tapering toward the rear, ensuring ample foot room where you need it most. The perforated surface prevents the accumulation of mud, ice, and snow, providing maximum traction in all weather conditions. This complete kit includes matching drop steps, which bolt directly to the boards to make entry and exit significantly easier on leveled or lifted trucks.

• Material: 16-gauge zinc-coated galvanized steel
• Finish: Protective bedliner coating for superior durability
• Design: Raptor-inspired bullet-stamped perforated holes for drainage and grip
• Dimensions: 7.5-inch width at widest point
• Mounting: High and tight fit for maximum ground clearance
• Kit Includes: RB20 running boards, mounting brackets, drop steps, and hardware
• Manufacturer Part Number: 6941068720T
• Warranty: Limited lifetime on materials/construction; 5-year on bedliner finish

Fits select 2009-2014 Dodge Ram 1500 and Ram 1500 models (Quad Cab / 4-Door).

Go Rhino RB20 Slim Line Running Boards deliver the aggressive, Raptor-inspired styling of the original RB series in a lower-profile package. Measuring 5.5 inches at the widest point before tapering toward the rear, these boards provide a dedicated full-length step while sitting tighter to the cab for improved ground clearance during off-road use. Constructed from heavy-duty 16-gauge zinc-coated galvanized steel, they act as a shield for your rocker panels against rocks and road debris.

This complete kit includes all necessary vehicle-specific mounting brackets for a straightforward, no-drill installation. The textured black powder coat finish provides superior resistance to corrosion, impact, and abrasion, ensuring long-term durability in harsh environments.

• Manufacturer Part Number: 69409980SPC
• Material: 16-gauge zinc-coated galvanized steel
• Width: 5.5 inches at widest point
• Finish: Textured Black powder coat
• Installation: Direct bolt-on; no drilling required
• Warranty: Limited lifetime on construction; 5-year on finish

Fits select 2014-2019 Chevrolet Silverado and GMC Sierra 1500, 2500 HD, and 3500 HD models, including Silverado 1500 LD and Sierra 1500 Limited.

Go Rhino RB20 Series running boards provide a heavy-duty, Raptor-inspired stepping surface that protects your truck's rocker panels while improving cab access. These cab-length boards are constructed from 16-gauge zinc-coated galvanized steel, offering superior resistance to corrosion, impact, and abrasion. The 7.5-inch wide stepping area features a modern bullet-stamped design with perforated holes that provide maximum traction while allowing mud, snow, and ice to drain away naturally.

This complete kit includes both driver and passenger side boards along with vehicle-specific mounting brackets. Designed for a high-and-tight fit, the RB20 provides ample ground clearance for off-road use. Installation is straightforward, utilizing factory mounting points on most applications to eliminate the need for drilling.

• Series: RB20 Running Boards
• Finish: Textured Black Powder Coat
• Material: 16-gauge zinc-coated galvanized steel
• Width: 7.5 inches at widest point (tapered design)
• Installation: Bolt-on, no-drill on most applications
• Included: Driver/passenger boards and mounting brackets
• MPN: 69405880PC
• Warranty: Limited lifetime on construction; 5-year on finish

Fits select 2014-2019 Chevrolet Silverado and GMC Sierra 1500, 1500 LD/Limited, 2500 HD, and 3500 HD trucks.

The Go Rhino RB20 Series running boards deliver a heavy-duty, Raptor-inspired stepping solution designed for durability and improved cab access. These 7.5-inch wide boards are constructed from 16-gauge zinc-coated galvanized steel, providing a stable platform with a tapered rear design. The surface features perforated holes that offer aggressive traction while preventing mud, ice, and snow from accumulating on the step.

This complete kit includes the cab-length running boards, vehicle-specific mounting brackets, and a set of matching drop steps. The drop steps reduce the step-in height, providing a secure point of entry for lifted vehicles. The assembly is finished in a durable textured black powder coat for maximum resistance against corrosion, impact, and abrasion.

• Constructed from 16-gauge zinc-coated galvanized steel for superior corrosion resistance
• Wide 7.5-inch stepping surface at the widest point, tapering toward the rear
• Perforated surface design for maximum traction and drainage
• Includes matching drop steps to ease entry and exit on lifted trucks
• Complete kit includes boards, mounting brackets, and 4 drop steps
• Finish: Textured Black Powder Coat
• Manufacturer Part Number: 6940588020PC
• Warranty: Limited Lifetime on materials and construction; 5-year on Textured Black finish

Fits select 2019-2026 Chevrolet Silverado and GMC Sierra 1500, 2500 HD, and 3500 HD trucks. These running boards are designed to provide a secure stepping surface and heavy-duty side protection for your cab.

The Go Rhino RB20 Series takes visual cues from the Ford Raptor, featuring an aggressive, modern bullet-stamped design. At its widest point, the board measures 7.5 inches across before tapering toward the rear for a clean, streamlined look. Each board is constructed from 16-gauge zinc-coated galvanized steel for maximum impact and abrasion resistance. The perforated surface provides critical traction in wet or icy conditions while allowing mud, snow, and debris to drain through rather than accumulate on the step.

This complete kit (MPN 69404887T) includes both side steps and all necessary vehicle-specific mounting brackets. The boards mount high and tight to the rocker panels to preserve ground clearance during off-road use. Installation is a straightforward bolt-on process that utilizes factory mounting points on most applications, requiring no drilling.

• Heavy-duty 16-gauge zinc-coated steel construction
• Protective bedliner finish for superior corrosion and impact resistance
• 7.5-inch wide stepping surface for secure footing
• Perforated design for drainage and maximum traction
• Complete kit includes bars, mounting brackets, and hardware
• Compatible with Go Rhino optional drop-down steps (sold separately)
• Limited Lifetime warranty on materials; 5-year warranty on bedliner finish

Fits select 2019-2026 Chevrolet Silverado and GMC Sierra 1500, 2500 HD, and 3500 HD models.

Go Rhino RB20 Running Boards provide a heavy-duty, Raptor-inspired stepping surface designed for off-road durability and cab-length protection. These side steps are constructed from 16-gauge zinc-coated galvanized steel to resist corrosion and impact, finished in a durable textured black powder coat. The modern bullet-stamped design features perforated holes that offer maximum traction while allowing mud, snow, and ice to drain through rather than accumulate. At 7.5 inches at its widest point, the board tapers toward the rear for a streamlined profile that sits high and tight against the rocker panels for maximum ground clearance.

This complete kit includes all necessary vehicle-specific mounting brackets and hardware. The bolt-on installation utilizes factory mounting points, requiring no drilling on most applications. For added versatility, these boards are compatible with optional drop-down steps (sold separately).

• Part Number: 69404887PC
• Material: 16-gauge zinc-coated galvanized steel
• Finish: Textured black powder coat
• Width: 7.5 inches at widest point (tapered design)
• Installation: Bolt-on; no-drill on most models
• Included: Pair of running boards and vehicle-specific mounting brackets
• Warranty: Limited lifetime on materials/construction; 5-year on finish

Fits select 2019-2026 Chevrolet Silverado and GMC Sierra 1500, 1500 LTD/Limited, 2500 HD, and 3500 HD models.

Go Rhino RB20 Running Boards provide a rugged, Raptor-inspired profile that combines high-clearance off-road styling with practical accessibility. These cab-length boards are 7.5 inches at their widest point, tapering toward the rear for a clean fitment that remains high and tight to the rocker panels. Constructed from 16-gauge zinc-coated galvanized steel, these steps are built to resist corrosion and handle the weight of daily use in harsh environments.

The perforated surface features punched holes that provide aggressive traction in wet or muddy conditions while preventing the accumulation of ice and snow. This complete kit includes two RB20 running boards, vehicle-specific mounting brackets, and a pair of bolt-on drop steps, making it an ideal solution for lifted trucks that require a lower step-in height without sacrificing the main board's clearance.

• Constructed from 16-gauge zinc-coated galvanized steel for maximum durability
• Protective bedliner finish offers superior impact and abrasion resistance
• 7.5-inch wide stepping surface for secure footing
• Includes a pair of removable drop steps for easier entry/exit
• Complete kit with all necessary mounting brackets and hardware included
• Manufacturer Part Number: 6940488720T

Fits select 2019-2026 Chevrolet Silverado and GMC Sierra 1500, 2500 HD, and 3500 HD models (including LTD, Limited, and HD variants).

Go Rhino RB20 cab-length running boards deliver a heavy-duty, Raptor-inspired aesthetic while providing a high-clearance stepping surface for demanding environments. Constructed from 16-gauge zinc-coated galvanized steel, these boards are engineered for superior impact and corrosion resistance. The perforated surface features punched holes that provide maximum foot traction while preventing the accumulation of mud, ice, and snow on the step.

This complete kit includes matching drop steps to facilitate easier entry and exit, especially on leveled or lifted trucks. The boards feature a modern bullet-stamped design that measures 7.5 inches at its widest point, tapering toward the rear for a streamlined profile. The kit comes ready for installation with all necessary mounting brackets and hardware included (MPN: 6940488720PC).

• Heavy-duty 16-gauge galvanized steel construction for maximum durability
• Textured black powder coat finish for abrasion and corrosion resistance
• Perforated traction surface prevents debris buildup
• 7.5-inch wide stepping area at the widest point
• Complete kit includes running boards, mounting brackets, and 4 drop steps
• Limited Lifetime warranty on materials and construction; 5-year warranty on finish

Fits select 2019-2026 Chevrolet Silverado and GMC Sierra 1500, 2500 HD, and 3500 HD models (including LTD, Limited, and ZR2/AT4X trims).

Go Rhino RB20 running boards deliver heavy-duty cab-length protection and easy entry for your truck. Inspired by the Ford Raptor design, these boards feature a wide 7.5-inch stepping surface that tapers toward the rear, providing a secure platform for entering or exiting the vehicle. Each board is constructed from 16-gauge zinc-coated galvanized steel, offering superior protection against corrosion, impact, and abrasion in harsh off-road environments.

The perforated, bullet-stamped surface provides maximum traction while allowing mud, snow, and ice to drain through rather than accumulate. This complete kit includes a pair of boards, vehicle-specific mounting brackets, and four removable drop steps for additional accessibility on lifted vehicles. The textured black powder coat finish provides a rugged look and durable defense against the elements.

• Material: 16-gauge zinc-coated galvanized steel
• Width: 7.5 inches at widest point (tapered)
• Finish: Textured Black Powder Coat
• Installation: Bolt-on brackets included (no drilling required on most models)
• Included: Running boards, brackets, and 4 removable drop steps
• Manufacturer Part Number: 6940488020PC
• Warranty: Limited Lifetime on materials; 5-year on finish

Fits select 2014-2019 Chevrolet Silverado and GMC Sierra 1500, 2500 HD, and 3500 HD models including Crew Cab and 1500 Classic (2019). This RB20 running board kit provides heavy-duty cab-length protection and a stable stepping surface for your truck.

Constructed from 16-gauge zinc-coated galvanized steel, these Raptor-inspired side steps are engineered for impact and corrosion resistance. The surface features perforated bullet-stamped holes that provide superior traction while allowing mud, snow, and debris to drain through, preventing buildup. The board is 7.5 inches wide at its widest point and tapers toward the rear for a modern, aggressive profile that sits high and tight against the rocker panels to maintain ground clearance.

Installation is a straightforward bolt-on process that utilizes factory mounting points on most applications, requiring no drilling. The textured black powder coat finish is designed to withstand abrasion and harsh weather conditions.

• Manufacturer Part Number: 69404787PC
• Material: 16-gauge zinc-coated galvanized steel
• Finish: Textured Black Powder Coat
• Width: 7.5 inches (widest point)
• Includes: Driver and passenger side boards, vehicle-specific mounting brackets, and hardware
• Warranty: Limited lifetime on materials/construction; 5-year warranty on finish
• Compatible with optional drop-down steps (sold separately)

Fits select 2014-2018 Chevrolet Silverado 1500/GMC Sierra 1500 and 2015-2019 Silverado/Sierra 2500 HD & 3500 HD models.

Go Rhino RB20 Running Boards bring an aggressive, Raptor-inspired look to your truck while providing a functional, high-clearance stepping surface. These boards are constructed from heavy-duty 16-gauge zinc-coated galvanized steel, offering superior protection against impact and abrasion. The perforated surface design ensures maximum traction in mud, ice, or snow while preventing debris buildup on the step.

This complete kit includes two detachable drop steps, making it significantly easier to enter and exit lifted vehicles. The textured black powder coat finish provides an extra layer of corrosion resistance, designed to withstand the rigors of off-roading and daily use. The boards are mounted high and tight to the rocker panels, maintaining ground clearance for trail use while protecting your vehicle's bodywork.

• Heavy-duty 16-gauge galvanized steel construction for long-term durability
• 7.5-inch wide stepping area that tapers toward the rear for a sleek profile
• Perforated surface allows drainage and provides non-slip traction
• Textured black powder coat finish for maximum corrosion resistance
• Complete kit includes running boards, mounting brackets, and 2 drop steps
• Limited Lifetime warranty on materials; 5-year warranty on finish
• Manufacturer Part Number: 6940478720PC

Fits 2022-2026 Toyota Tundra models (SR, SR5, Limited, Platinum, 1794 Edition, TRD Pro, and Capstone).

Go Rhino RB10 Slim Line Running Boards provide the rugged, Raptor-inspired styling of the original RB series with a narrower, low-profile design. Measuring 4 inches at the widest point—compared to the 6-inch original—these boards sit tighter to the cab, maximizing ground clearance for off-road maneuvers while still providing a reliable full-length step for passengers. This slim profile is ideal for drivers who want the utility of a side step without the bulk of traditional boards.

Constructed from 16-gauge zinc-coated galvanized steel, these boards are built to withstand heavy impacts and resist corrosion in harsh environments. The textured black finish provides a high-traction surface and extra protection against rock chips and road debris. The included no-drill mounting brackets allow for a straightforward installation using factory mounting points, ensuring a secure fit without vehicle modification.

• Material: Heavy-duty 16-gauge zinc-coated galvanized steel
• Finish: Durable Textured Black for impact, corrosion, and abrasion resistance
• Design: Slim, low-profile 4-inch wide louvered step platform
• Protection: Safeguards rocker panels from flying debris and trail obstacles
• Installation: Easy, no-drill bolt-on installation with included brackets
• Manufacturer Part Number: 63443687SPC
• Warranty: Limited Lifetime on construction; 5-year on finish

Fits select 2015-2026 Ford F-150 and 2017-2026 Ford F-250/F-350 Super Duty (All Trims including Raptor, Tremor, King Ranch, and Lariat).

Go Rhino RB10 Series running boards provide a wide, stable stepping surface inspired by the OE boards found on the Ford Raptor. Constructed from heavy-duty 16-gauge zinc-coated galvanized steel, these side steps are engineered to resist corrosion, impact, and abrasion while maintaining high ground clearance for off-road performance. The signature louvered design ensures maximum traction in all weather conditions, while the welded boxed ends provide a rugged, finished appearance.

This complete kit includes both driver and passenger side boards along with vehicle-specific mounting brackets and hardware. The bolt-on design allows for a straightforward installation that typically requires no drilling, mounting securely to factory points for a high-and-tight fit against the rocker panels.

• Fabricated from 16-gauge zinc-coated galvanized steel for maximum strength and corrosion resistance.
• Durable textured black powder coat finish protects against the elements.
• Raptor-inspired louvered step area provides a high-traction surface for safe cab entry.
• High-clearance design protects rocker panels during off-road use.
• Includes all necessary heavy-duty mounting brackets and hardware.
• Manufacturer Part Number: 63415587PC.
• Warranty: Limited lifetime on materials and construction; 5-year on finish.

Fits select 2019-2026 Chevrolet Silverado and GMC Sierra 1500, 2500 HD, and 3500 HD models.

The Go Rhino RB10 Running Board Kit delivers heavy-duty side protection and a wide, secure stepping surface inspired by the desert-racing Ford Raptor. These boards are engineered to mount high and tight against the rocker panels, providing the ground clearance needed for off-road adventures while protecting your truck's body from road debris and trail obstacles.

Built for durability in harsh environments, each board is constructed from 16-gauge zinc-coated galvanized steel and finished in a textured black powder coat for superior corrosion, impact, and abrasion resistance. The classic louvered design isn't just for aesthetics; it provides maximum traction and allows mud, snow, and water to pass through the step area. This complete kit includes all necessary mounting brackets and hardware for a straightforward installation that typically requires no drilling.

• Material: 16-gauge zinc-coated galvanized steel
• Finish: Textured black powder coat
• Design: Raptor-style louvered step area with welded, boxed ends
• Installation: Bolt-on mounting brackets included (no drilling on most models)
• Warranty: Limited lifetime on construction; 5-year on finish
• MPN: 63404887PC

Fits select 2019-2026 Ram 1500 models, including Big Horn, Laramie, Limited, Rebel, Tradesman, and TRX.

The Go Rhino Dominator Extreme D1 SideSteps Complete Kit provides a rugged, functional upgrade for your truck, combining easier cab access with improved rocker panel protection. This kit is designed as a total solution, featuring both driver and passenger side steps along with all necessary vehicle-specific mounting brackets for a secure, bolt-on installation.

Engineered to mount directly to the factory points on the Ram 1500 chassis, the Dominator Extreme D1 series offers a high-clearance design that doesn't compromise your truck's off-road capabilities. Whether you are navigating job sites or trail obstacles, these steps provide a stable, slip-resistant surface for everyday use.

• Product Line: Dominator Extreme D1
• Complete Kit: Includes side steps and mounting brackets
• Direct-fit installation to OEM mounting points
• Comprehensive cab-length protection and access
• Manufacturer Part Number: 14399T