Fits 2024+ Jeep Wrangler JL, JLU, and Gladiator JT models.

Upgrade your Jeep's audio system with the DS18 JL24-SBAR/BKLD overhead soundbar. This system is engineered specifically for the 2024 and newer Wrangler and Gladiator platforms, providing a high-output solution that integrates seamlessly with the factory overhead mounting points. Built to withstand the elements, it delivers powerful, clear sound even with the top off, making it an essential upgrade for off-road enthusiasts.

This configuration includes two DS18 NXL-IQ8/BK marine-grade 8-inch coaxial speakers, known for their high-sensitivity performance and weather resistance. The soundbar also features integrated RGB LED lighting, allowing you to customize the cabin atmosphere to match your build.

• Manufacturer Part Number: JL24-SBAR/BKLD
• Speakers Included: 2 x NXL-IQ8/BK 8-inch marine-grade speakers
• Lighting: Integrated RGB LED rings
• Construction: Durable plastic enclosure designed for direct vehicle fitment
• Application: Overhead mounting for Jeep Wrangler JL/JLU and Gladiator JT

Fits 2018-2023 Jeep Wrangler JL (2-door), JLU (4-door), and Gladiator JT.

The DS18 JL-SBAR22/BK is a precision-engineered overhead soundbar enclosure designed to significantly upgrade the audio potential of your Jeep. This enclosure replaces the restrictive factory soundbar, providing a robust housing for much larger, higher-performance components. Constructed from high-density plastic with a textured black finish, it is built to withstand the rigors of off-road environments while maintaining an OE-integrated look.

• Replaces the factory soundbar using existing mounting points for a secure installation.
• Configured to accommodate two 8-inch mid-range speakers and two 3.78-inch tweeters or drivers.
• Engineered specifically for the 2018-2023 Jeep Wrangler JL/JLU and Gladiator JT platforms.
• Durable construction with a black finish that matches the vehicle's interior trim.
• Manufacturer Part Number: JL-SBAR22/BK

Note: This is an empty enclosure; speakers and tweeters are not included and must be purchased separately.

Fits 2018-2023 Jeep Wrangler JL, JLU, and Gladiator JT models.

The DS18 JL-SBAR/BK.HT is a precision-engineered overhead soundbar enclosure designed to significantly upgrade the audio output of your Jeep JL or JT. This unit replaces the factory soundbar, providing the mounting depth and structural integrity required for high-output 8-inch speakers. It is the ideal solution for Jeep owners looking to overcome road noise and enjoy crystal-clear audio with the top down.

• Specifically engineered for 2018-2023 Jeep Wrangler JL/JLU and Gladiator JT.
• Accommodates four (4) 8-inch speakers (speakers are not included).
• Includes four (4) DS18 PRO-TW4L high-intensity bullet tweeters for sharp, clear highs.
• Includes one (1) JL-SBARHARNESS plug-and-play wiring harness for a streamlined installation process.
• Designed for a factory-style fitment on the vehicle's roll bar.
• Manufacturer Part Number: JL-SBAR/BK.HT

Fits 2018-2023 Jeep Wrangler JL, JLU, and Gladiator JT.

The DS18 JL-SB6 overhead soundbar is a precision-engineered audio upgrade designed to replace the factory overhead speaker bar in 2018-2023 Jeep Wrangler JL and Gladiator JT models. This high-output system provides significantly improved volume and clarity for open-air driving, mounting directly to factory locations for a seamless, integrated appearance. This kit comes pre-loaded with a high-performance speaker configuration, including 6.5-inch midrange drivers and 1.7-inch tweeters.

• Manufacturer Part Number: JL-SB6
• Includes (2) 6JP300N-4 6.5-inch Midrange Speakers
• Includes (2) ZXI-T1 1.7-inch Tweeters
• Designed specifically for the overhead mounting points on Jeep JL and JT models
• Engineered for high-volume performance in open-cabin environments

Fits 2007-2018 Jeep Wrangler JK and JKU models.

The DS18 JK-SBAR22/BK overhead soundbar enclosure is designed to significantly upgrade the audio stage in your Jeep Wrangler JK or JKU. This high-density plastic enclosure replaces the limited factory soundbar, providing a rigid mounting platform for larger, more powerful audio components. Finished in black to blend with the vehicle interior, this unit is engineered to project sound throughout the cabin, even with the top off.

• Manufacturer Part Number: JK-SBAR22/BK
• Configuration: Mounts two 8-inch speakers and two 2.3-inch tweeters
• Fitment: 2007-2018 Jeep Wrangler JK (2-Door) and JKU (4-Door)
• Material: High-density plastic construction for durability and resonance control
• Color: Black
• Note: Speakers and tweeters are not included

Fits 2007-2018 Jeep Wrangler JK and JKU models.

The DS18 JK-SBAR/BK.HT Soundbar System is a precision-molded overhead housing designed to replace the restrictive factory soundbar in Jeep Wrangler JK and JKU models. This system provides a robust mounting platform for a high-output audio setup, specifically engineered to accommodate larger drivers that the original equipment cannot support. It is the ideal foundation for Jeep owners looking to maintain a clean, integrated look while significantly increasing volume and clarity for open-air driving.

• Direct fit for 2007-2018 Jeep Wrangler JK (2-Door) and JKU (4-Door)
• Accommodates four 8-inch speakers (speakers are not included)
• High-density molded construction with a textured black finish to match vehicle trim
• Optimized for high-volume audio applications in open-top environments
• Manufacturer Part Number: JK-SBAR/BK.HT

Upgrade your vehicle's factory audio with the DS18 GEN-X Series G6.5XC 2-way component speaker system. Designed for high-fidelity sound reproduction, this 6.5-inch kit separates the woofer and tweeter to provide a more accurate soundstage and improved clarity compared to standard coaxial speakers.

Built for versatility and durability, the GEN-X series delivers balanced performance across the frequency range. These speakers are engineered for a universal fit, making them an ideal choice for custom installations or OEM replacements where mounting depth and diameter allow for a 6.5-inch driver.

• Manufacturer Part Number: G6.5XC
• System Type: 6.5" 2-Way Component Kit
• Power Handling: 50 Watts RMS
• Nominal Impedance: 4 Ohms
• Configuration: Separate woofers, tweeters, and crossovers
• Fitment: Universal application

The DS18 EXL-SQ6.9 is engineered for car audio enthusiasts who demand high-fidelity sound reproduction without sacrificing power. These 6x9-inch speakers utilize a 2-way coaxial configuration that mimics the performance of a component system, delivering distinct highs and accurate mid-bass response.

The build features a lightweight, high-strength fiberglass cone that provides the rigidity necessary for clear, undistorted audio even at higher volumes. With a 3-ohm impedance, these speakers are designed to maximize power output from your amplifier or head unit compared to traditional 4-ohm alternatives, ensuring efficient performance across your entire soundstage.

• Manufacturer Part Number: EXL-SQ6.9
• Speaker Size: 6x9 inches
• Power Handling: 160 Watts RMS
• Nominal Impedance: 3 Ohms
• System Type: 2-Way Coaxial / Component
• Cone Material: Fiberglass

The DS18 EXL-SQ6.5 is a versatile 6.5-inch speaker system engineered for audiophiles seeking high-fidelity sound reproduction. Designed for flexibility, this system can be configured as either a high-performance 2-way coaxial speaker or a dedicated component system to suit your specific car audio installation needs.

Built with a lightweight and rigid fiberglass cone, these speakers provide exceptional mid-range clarity and transient response. The lower 3-ohm impedance rating is specifically designed to extract more power from your amplifier or head unit compared to standard 4-ohm drivers, ensuring a more dynamic listening experience without compromising sound quality.

• Manufacturer Part Number: EXL-SQ6.5
• Speaker Size: 6.5 inches
• Power Handling: 120 Watts RMS
• Nominal Impedance: 3 Ohms
• Cone Material: High-grade fiberglass
• System Configuration: 2-Way Coaxial and Component Hybrid
• External crossover components included for precise frequency management

The DS18 EXL-SQ5.7 5x7-inch 2-way coaxial speakers are engineered for audiophiles seeking high-fidelity sound reproduction in a factory-size fitment. Part of the EXL-SQ series, these speakers utilize a lightweight yet rigid fiberglass cone to deliver precise mid-bass response and clear vocal clarity, significantly reducing the distortion common in standard paper cones.

Designed with a 3-ohm impedance, the EXL-SQ5.7 allows your amplifier or high-powered head unit to extract more power compared to traditional 4-ohm speakers, maximizing system efficiency. These speakers handle a robust 120 Watts RMS, making them a perfect upgrade for listeners who demand high volume without sacrificing sound quality. The integrated tweeter and crossover design provide a seamless transition between frequencies for a balanced soundstage.

• Manufacturer Part Number: EXL-SQ5.7
• Size: 5x7 inches
• Power Handling: 120 Watts RMS / 380 Watts Max
• Impedance: 3 Ohms
• Cone Material: Fiberglass
• Configuration: 2-Way Coaxial and Component System
• Sensitivity: 90dB
• Frequency Response: 80Hz - 22kHz

The DS18 EXL-SQ5.25 5.25-inch 2-way coaxial speakers are engineered for audiophiles seeking high-fidelity sound in a compact footprint. These speakers feature a lightweight yet rigid fiberglass cone that ensures precise mid-bass response and long-term durability under high-volume playback. The integrated PEI dome tweeter delivers crisp, clear high frequencies to round out the soundstage.

Rated at 80W RMS, these speakers utilize a 3-ohm impedance design, allowing them to extract more power from your amplifier or head unit compared to standard 4-ohm drivers. This makes them an efficient upgrade for enthusiasts looking to improve clarity and output without necessarily replacing their entire source unit.

• Manufacturer Part Number: EXL-SQ5.25
• Speaker Size: 5.25" (133mm)
• Power Handling: 80 Watts RMS / 240 Watts Max
• Nominal Impedance: 3-Ohm
• Cone Material: Fiberglass
• Tweeter Type: PEI Dome
• Frequency Response: 80Hz - 20KHz
• Voice Coil: 1" (25mm) KSV

The DS18 EN46-35 is a 35-inch universal speaker enclosure engineered for high-output audio configurations. This empty housing allows audio enthusiasts to mount multiple drivers into a single, cohesive unit, making it an ideal choice for custom trunk builds, UTV installations, or tailgate setups where maximizing sound pressure level is the priority.

Designed for durability and precision, the EN46-35 features pre-cut mounting holes to accommodate a high-fidelity array of midrange speakers and high-frequency tweeters. By consolidating four 6.5-inch drivers and two 3-inch tweeters, this enclosure provides a streamlined solution for builders who need a professional finish without the complexity of a full custom fiberglass build.

• Manufacturer Part Number: EN46-35
• Total Length: 35 inches
• Speaker Compatibility: Fits 4 x 6.5-inch midrange or coaxial speakers
• Tweeter Compatibility: Fits 2 x 3-inch tweeters
• Construction: Built to withstand high-vibration environments
• Installation: Open-baffle design (Speakers and tweeters not included)

Upgrade your custom audio setup with the DS18 DLRING8, an 8-inch digital LED speaker ring designed to provide both high-impact visual effects and functional mounting clearance. This ring features addressable digital LEDs, allowing for advanced color-chasing, pulsing, and strobe patterns that go beyond standard RGB lighting. The integrated 0.5-inch (1/2") spacer depth is ideal for installers needing extra clearance for large speaker magnets or deep-basket drivers in tight mounting locations.

• Fits most universal 8-inch speakers and subwoofers
• Integrated digital LEDs for addressable color-chasing light effects
• 1/2-inch (0.5") spacer depth provides additional mounting clearance
• Durable construction designed for automotive and marine environments
• Requires a digital LED controller (sold separately) for lighting functionality
• Manufacturer Part Number: DLRING8

Enhance your marine or mobile audio system with the DS18 DLRING6, a 6.5-inch digital LED speaker ring designed to provide vibrant lighting effects while providing necessary installation clearance. Unlike standard RGB rings, these digital LEDs allow for more complex color patterns and transitions to customize your vehicle's aesthetic.

The DLRING6 serves a dual purpose as a 1/2-inch (0.5") spacer, making it an essential component for installations where extra mounting depth is required between the speaker basket and the mounting surface. Its durable construction ensures a secure fit for most standard 6.5-inch drivers.

• Model Number: DLRING6
• Compatible Speaker Size: 6.5 inches
• Spacer Depth: 0.5 inches (1/2")
• Lighting Type: Addressable Digital LED
• Function: Lighting accent and mounting spacer

Enhance your custom audio installation with the DS18 DLRING10 10-inch Digital LED Speaker Ring. This versatile component serves a dual purpose: it functions as a 1/2-inch mounting spacer to provide necessary clearance for high-excursion speakers or shallow enclosures, and it features integrated digital LED lighting for a professional, customized look.

Designed for precision fitment with 10-inch speakers, the DLRING10 uses high-quality digital LEDs to provide vibrant illumination and complex lighting effects compared to standard RGB rings. It is an ideal solution for marine, automotive, or powersports applications where both mounting depth and aesthetic impact are required.

• Speaker Compatibility: Fits most 10-inch subwoofers and mid-range speakers
• Spacer Depth: 0.5 inch (1/2") for added mounting clearance
• Lighting Type: Integrated Digital LED
• Construction: Durable acrylic/polycarbonate housing
• Manufacturer Part Number: DLRING10

Fits 2021-2025 Ford Bronco 4-Door models.

Maximize your vehicle's audio output with the DS18 BRO-SBAR/BK overhead sound bar enclosure. Specifically engineered for the 2021-2025 Ford Bronco 4-Door, this sound bar mounts securely to the factory roll bar, providing a clean, integrated look while positioning your speakers for optimal sound staging in open-air environments.

Built to handle the rigors of off-road use, this enclosure allows you to install a comprehensive array of drivers to overcome wind and road noise. It is designed for a precise fit without interfering with factory functionality.

• Specifically designed for 2021-2025 Ford Bronco 4-Door models
• Mounting capacity: 4 x 8-inch speakers, 2 x 6.5-inch speakers, and 2 x 3.78-inch tweeters
• Durable construction for long-lasting performance in open-top conditions
• Manufacturer Part Number: BRO-SBAR/BK
• Note: This is an enclosure only; speakers and tweeters are sold separately

Fits 2021-2025 Ford Bronco (Front Doors).

The DS18 BRO-FD-LR front door panels are engineered for Bronco owners who want to upgrade their vehicle's audio stage beyond factory limitations. These custom-molded panels replace or modify the front door trim to house a high-output speaker array, providing a secure mounting solution for larger drivers and additional tweeters. Designed to maintain a clean interior aesthetic while maximizing acoustic performance, these panels are the foundation for a high-decibel audio system.

• Compatible with 2021-2025 Ford Bronco models
• Designed for front door installation
• Mounting points for two 6.5-inch speakers per panel
• Mounting points for two 3.8-inch tweeters per panel
• Manufacturer Part Number: BRO-FD-LR
• Note: Speakers and tweeters are not included

Fits 2021-2025 Ford Bronco models. Upgrade your off-road audio system with the DS18 BRO-BD-LR rear door panels, specifically engineered to provide a custom mounting solution for high-output speaker configurations in the back of your cabin.

These panels replace or overlay the factory rear door trim, allowing you to install a significantly more robust audio setup than the OEM configuration. Designed for enthusiasts who want more volume and clarity, they provide a secure, vibration-resistant mount for multiple drivers. Please note that speakers and tweeters are not included and must be purchased separately.

• Specifically designed for 2021-2025 Ford Bronco rear doors
• Mounting points for two 6.5-inch speakers per panel
• Two 2.3-inch tweeter cutouts for high-frequency clarity
• Constructed for a precise fit and professional appearance
• Sold as a pair (Left and Right)
• Manufacturer Part Number: BRO-BD-LR

Fits 2021-2025 Ford Bronco.

Enhance the low-end frequency response of your off-road rig without sacrificing valuable floor space. The DS18 BRO-BASS is a vehicle-specific tailgate subwoofer enclosure designed to mount directly to the rear gate of the 2021-2025 Ford Bronco. This loaded solution comes pre-installed with a high-performance DS18 IXS12.4D 12-inch shallow-mount subwoofer, providing an integrated bass upgrade that complements the vehicle's interior while standing up to the demands of rugged use.

• Manufacturer Part Number: BRO-BASS
• Includes pre-loaded DS18 IXS12.4D 12-inch shallow subwoofer
• Tailgate-mounted design preserves cargo area and maintains accessibility
• Precision-engineered for 2021-2025 Ford Bronco models
• Designed for high-output bass in a space-saving configuration

The DS18 8XL800-4 is a high-performance 8-inch mid-range loudspeaker engineered for high-volume audio systems that demand clarity and power. This driver is specifically designed to handle the mid-frequency spectrum, making it a critical component for competitive SPL builds or custom high-output installations.

With a robust power handling of 400 Watts RMS and a 4-ohm impedance, this loudspeaker provides the necessary punch and efficiency to cut through road noise. Its construction focuses on durability and thermal management to ensure consistent performance during extended high-volume play.

• Product Type: 8-Inch Mid-Range Loudspeaker
• Power Handling: 400 Watts RMS
• Nominal Impedance: 4 Ohms
• Driver Size: 8 Inches
• Manufacturer Part Number: 8XL800-4

The DS18 6XL650NB-4 6.5-inch mid-range loudspeakers are engineered for high-SPL applications where extreme volume and tonal clarity are required. Featuring a high-strength neodymium magnet motor, these drivers provide superior flux density and sensitivity while significantly reducing mounting weight compared to traditional ferrite alternatives.

The integrated bullet resonator extends high-frequency response, ensuring your mid-range cuts through even the loudest bass setups. These speakers are built to handle high-power amplification in custom door pods or competition-grade enclosures.

• Manufacturer Part Number: 6XL650NB-4
• Size: 6.5 inches (165mm)
• Power Handling: 325 Watts RMS
• Nominal Impedance: 4-Ohm
• Magnet Material: Neodymium for weight savings and high efficiency
• Configuration: Bullet mid-range design for improved high-end projection

The DS18 10XL1000MB-8 is a high-performance 10-inch mid-bass loudspeaker designed for professional-grade audio systems and high-output mobile environments. This 10XL series driver is engineered to deliver punchy, accurate mid-range response, bridging the gap between subwoofers and high-frequency drivers in high-SPL setups.

• Power Handling: 500 Watts RMS
• Impedance: 8 Ohm
• Speaker Size: 10 inches
• Series: 10XL
• Manufacturer Part Number: 10XL1000MB-8

Built for durability and consistent performance under heavy load, this mid-bass speaker is ideal for custom door panels, pro audio arrays, and high-performance enclosures where high-volume clarity is essential.