Rigid Industries Chase 28-inch Rear Facing LED Light Bar combines running lights, brake lights, reverse lights, and turn signals into one compact, fully customizable package. Designed for UTVs, buggies, Jeeps, and other off-road vehicles, this 28-inch light bar adds safety and visibility with programmable triggers and multi-color LED functionality.

• 28-inch rear-facing LED light bar with red, white, blue, green, and amber LED colors
• Supports running, brake, reverse, and turn signal functions
• Programmable running circuit plus three auxiliary triggers, each customizable with 27 pre-programmed modes or user-defined settings
• Over 300,000 possible configuration combinations
• Race-series compliant with strobing blue, amber, green, and red
• IP68 dust/water ingress protection and SAE J575 shock/vibration compliance
• Wide 9-16 VDC operating voltage range
• Extreme temperature tolerance: -40°F to 158°F with integrated thermal management
• Pressure equalizing vent prevents moisture buildup
• Sleek, low-profile design with no exterior hardware
• Available with adjustable tube mounts for 1.5–2-inch roll cages or 15-degree horizontal mounting brackets
• Includes 13-inch wiring lead; professional installation recommended

Whether you need a rear-facing chase light for race compliance or off-road trail safety, the Rigid Chase 28-inch light bar delivers customizable illumination with rugged durability.

The Rigid Industries Chase combines brake, running, reverse, cargo, and strobe lights into one compact, multi-function rear-facing LED fixture. A blue perimeter halo can be wired as a strobe for chase/race use, a running light, or a third brake light. The center section delivers a 715-lumen white reverse/area light, while a downward-facing 168-lumen white LED illuminates the cargo area. Whether used individually or wired in tandem, the Chase is a versatile solution for UTVs, buggies, Jeeps, and other off-road vehicles.

Features & Specifications:

• 168-lumen downward-facing white LED courtesy/cargo light
• 715-lumen rear-facing white LED reverse/area light
• 5-foot multi-trigger lead for custom wiring
• 5 modes: strobe, courtesy, reverse, running, and brake
• Blue perimeter halo (also available in amber and red)
• Impact-resistant polycarbonate lens
• Integrated high-efficiency aluminum heat sink
• IP68 dust-tight and waterproof
• Pressure equalizing vent prevents moisture buildup
• RFI/EMI protection for reliable electronics
• RoHS compliant
• Includes mounting bracket and hardware

MPN: 90144

The Rigid Industries Chase LED Tail Light Kit consolidates strobe, running, brake, reverse, and cargo courtesy lighting into one compact rear-facing housing. Designed for UTVs, rails, buggies, Jeeps, and other off-road vehicles, it provides a universal rear lighting upgrade. The red perimeter halo functions as a race strobe or third brake light, while the center white LED delivers 715 lumens of reverse or area illumination. A downward-facing white LED adds 168 lumens of cargo/courtesy light.

Installation is straightforward with the included mounting bracket, and a 5-foot multi-trigger lead allows custom wiring for all five modes. The light's aluminum housing integrates a high-efficiency heat sink, and the impact-resistant polycarbonate lens is sealed to IP68 standards for dust and continuous immersion protection. A pressure equalizing vent prevents condensation, and onboard RFI/EMI protection reduces electrical noise.

• Red perimeter halo serves as strobe, running, or third brake light
• Center white LED: 715 lumens for reverse/area lighting
• Downward-facing white LED: 168 lumens for courtesy/cargo light
• Five modes: strobe, courtesy, reverse, running, and brake
• 5-foot multi-trigger lead with bare-wire ends for custom configuration
• Integrated aluminum heat sink
• IP68 dust-tight and water immersion rated
• Pressure equalizing vent
• RFI/EMI protection
• RoHS compliant
• Includes mounting bracket

The Rigid Industries Chase Amber LED tail light kit packs multiple rear-facing functions into a single, compact housing: bright white reverse/area light (715 lumens), downward-facing courtesy/cargo light (168 lumens), and a perimeter amber halo that serves as a running light, third brake light, or strobe for chase applications. The included mounting bracket allows straightforward installation on the rear of UTVs, off-road buggies, Jeeps, and other rigs, while the 5-foot multi-trigger lead and five selectable modes (strobe, courtesy, reverse, running, brake) give you flexible wiring options.

Built for harsh environments, the Chase features an integrated high-efficiency aluminum heat sink, an IP68 dust- and water-ingress rating, reverse polarity protection, a pressure-equalizing vent, and RFI/EMI shielding. The amber halo LEDs provide instant visibility, and the white center array doubles as a work light. Runs on 10–15 V DC systems.

• Rear-facing white LED reverse/area light: 715 lumens
• Downward-facing white LED courtesy/cargo light: 168 lumens
• Amber perimeter halo with running, brake, and strobe functions
• 5 modes: Strobe / Courtesy / Reverse / Running / Brake
• 5-foot multi-trigger lead for custom configuration
• Integrated aluminum heat sink
• IP68 dust and water resistant; pressure-equalizing vent
• Reverse polarity protection; RFI/EMI protection
• RoHS compliant; operates on 10–15 V DC
• Includes mounting bracket and hardware
• Rigid Industries part number 90122

Fits select 2021–2026 Ford Bronco models (Badlands, Base, Big Bend, Black Diamond, Everglades, First Edition, Heritage Edition, Heritage Limited Edition, Outer Banks, Raptor, Stroppe Edition, Wildtrak).

This Rigid Industries kit replaces the factory third brake light with a cleanly integrated chase pod light. The included OE-style bracket and mount are crafted from stainless steel and finished with a UV- and abrasion-resistant powder coat for long-term durability in harsh conditions. Professional installation is recommended, and detailed instructions are provided.

• Direct replacement for the stock third brake light on 2021–2026 Ford Bronco
• Stainless steel bracket and mount with UV/abrasion-resistant powder coat
• Vehicle-specific design ensures a precise fit using factory mounting points
• Professional installation recommended; includes step-by-step instructions

Fits 2008-2014 Dodge Challenger models including SE, SXT, R/T, and SRT8.

Update your vehicle's rear aesthetics with Raxiom Smoked LED Tail Lights. These assemblies feature a modern, race track-inspired running light design and integrated sequential turn signals, providing a significant visual upgrade over factory units. Beyond the styling, the high-intensity diffused LEDs improve visibility for following drivers during braking and signaling maneuvers.

Engineered for long-term durability, these tail lights (MPN: CH3762) are constructed with rugged black ABS plastic housings and smoked polycarbonate lenses. Each assembly is weather-sealed to protect the internal electronics from moisture, dust, and road debris. These lights utilize red diffused LEDs for running, brake, and turn functions, while high-output white LEDs provide clear illumination for reverse signaling.

• Sequential turn signal indicators for a modern lighting signature
• Race track-inspired diffused LED running light design
• Durable smoked polycarbonate lenses and black ABS housings
• Weather-sealed construction protects internal components
• DOT and SAE compliant for street legality
• Direct plug-and-play installation into factory mounting points
• No cutting or wiring modifications required; ~45-minute install time
• Manufacturer Part Number: CH3762

Fits 2005-2009 Ford Mustang Base, Bullitt, GT, and Shelby (GT, GT500, GT500KR).

Update your S197 Mustang’s rear lighting with Raxiom Gen5 LED Tail Lights. These units replace the factory incandescent bulbs with high-intensity LED clusters that offer faster illumination and increased brightness for improved safety. Featuring an integrated sequential function, the turn signals and hazard lights pulse from the center outward. When the brakes are applied, the lights sequence once and remain solid to ensure clear signaling to following drivers.

Constructed with state-of-the-art electronic components, these tail lights feature a black housing and aggressively smoked lenses. The installation is a direct swap using a plug-in connector that mates to the factory wiring harness. These lights are DOT compliant under compliance number QR1200176, ensuring they meet federal safety standards for US-spec vehicles.

• Manufacturer Part Number: 49169
• Modern LED technology with built-in sequential turn signals
• Aggressive smoked lens with stealthy black housing
• Direct plug-and-play installation into factory harness
• DOT Compliant under QR1200176
• Sold as a set of two (driver and passenger side)
• Note: Not compatible with aftermarket tail light trim; fits US-spec models only without wiring modification

Fits select 1996-2004 Ford Mustang models, including Base, GT, Mach 1, and 1997 SVT Cobra (Excludes 1999-2001 Cobra).

Bring the iconic 1960s Shelby aesthetic to your SN95 or New Edge Mustang with the Raxiom Plug-In Sequential Tail Light Kit. This kit (MPN 49143) updates your rear lighting signature with a modern sequencing pattern while maintaining a classic muscle car look. When the turn signal or hazard lights are activated, the lights sequence from the center out. During braking, the segments sequence once and then remain fully illuminated for maximum safety and visibility.

Designed as a true plug-and-play solution, this kit replaces your factory wiring harness using OE-style connectors. Installation is straightforward and requires no cutting or splicing; simply reuse your factory incandescent brake and reverse bulbs in the new sockets. This kit is built using high-grade electronic components to ensure long-term reliability under varied driving conditions.

• Retro Sequencing Pattern: Triple-segment sequence from the center-out for signals and hazards.
• OE-Style Integration: Direct plug-in replacement for the factory tail light wiring harness.
• Reliable Performance: Assembled with state-of-the-art electronic components for consistent operation.
• Note: Not compatible with LED replacement bulbs or 1999-2001 SVT Cobra models equipped with amber turn signals.

Fits all 2005-2009 Ford Mustang models, including Base, GT, Bullitt, and Shelby (GT, GT500, GT500KR).

Modernize the rear profile of your S197 with the Raxiom Coyote Tail Lights. Inspired by the 2010 redesign, these housings bring the iconic vertical-segment styling to the 2005-2009 chassis. Each light features dual vertical reverse segments: one provides high-visibility illumination when backing up, while the other serves as a precision-molded reflector to maintain safety and visual symmetry.

Engineered to exacting standards using OEM-grade materials, these tail lights are a direct-fit replacement for factory units. They utilize existing mounting points and hardware for a straightforward installation. These units are DOT-approved for street use and are compatible with aftermarket sequential kits for those seeking a classic Shelby-inspired signal pattern.

• Manufacturer Part Number: 49123
• DOT Compliance: Approved under QR1200112
• Housing Finish: Chrome
• Lens Color: Red/Clear
• Compatibility: Replaces factory 2005-2009 S197 tail light housings
• Quantity: Sold as a pair (Left and Right)

Fits all 2010-2023 Ford Mustang models, including V6, GT, EcoBoost, and Shelby variants (US Spec only).

While 2010 and newer Mustangs come factory-equipped with sequential turn signals, that signature animation is typically disabled for other lighting functions. The Raxiom Plug-and-Play Tail Light Sequencer (MPN 301042) solves this by adding sequential patterns to your hazard lights, braking sequences, and remote lock/unlock signals. When the brakes are applied, the tail lights sequence once from the center out and remain solid; during hazard or turn signal use, the sequence repeats until the signal is deactivated.

Built using high-grade electronic components, this kit is designed for a simple, non-destructive installation. It features automotive-grade connectors that plug directly into the factory wiring harness, requiring no cutting, splicing, or specialized tools. This kit includes two inline harness units—one for the driver side and one for the passenger side—to completely replace the rear tail light sub-harnesses.

• Adds sequential animation to hazards, brakes, and lock/unlock functions
• Simple plug-and-play installation into factory mounting points
• Direct replacement for OE tail light wiring harnesses
• Maintains solid light output after initial brake sequence for safety
• Compatible with US-spec tail lights only
• Manufacturer Part Number: 301042

Note: This product is engineered for Mustangs sold in the US market. It is not compatible with EU or UK-spec Mustang wiring without significant modification.

Fits 2024-2025 Ford F-150 models including XL, XLT, Lariat, King Ranch, Platinum, Raptor, and Tremor (equipped with factory LED taillights).

The Putco Excalibur LED Tailgate Light Bar provides a seamless lighting upgrade for your Ford truck, delivering high-output performance with a custom-integrated look. Designed to mimic the aggressive Lightning-style lighting, this bar features a patented Red Jeweled Makrolon lens and an injection-molded enclosure that sits flush with the OEM tailgate. The solid-state, fully sealed design protects the internal LED chip array from water, dust, and debris.

This assembly offers six distinct functions, including running lights, brake lights, hazards, and programmable turn signals. Drivers can choose between Sequential Scan, Sequential Chase, or Standard Flash modes using the Tap-N-Sync interface. For improved safety, the integrated Triple Flash brake signal alerts following drivers, while the ultra-bright 8,000-lumen reverse light ensures maximum visibility in low-light conditions.

• Manufacturer Part Number: 92060-37
• Six-Function Output: Running, brake, turn, reverse, and hazards
• Lumen Rating: 8,000-lumen cool white reverse lights
• Programmable Signals: Sequential Scan, Sequential Chase, and Standard Flash options
• Triple Flash Brake: Pulse signal for enhanced visibility during braking
• Construction: Tinted polycarbonate resin encapsulation with Makrolon lens
• Installation: Includes Putco Quick Connect Plug-N-Play harness
• Animation: Signature startup sequence upon ignition or remote start

Fits 2010-2023 Lexus GX460 and Toyota Prado. These Oracle Lighting Black Series Flush Lensless LED Tail Lights feature a revolutionary low-profile design engineered to eliminate the risk of lens damage during off-road trail riding. Unlike the factory tail lights which lack dedicated reverse lighting, this set includes integrated high-output reverse lights powered by 40 super-bright LEDs for significantly improved rear-facing visibility.

Constructed with aggressive matte black cladding, these units wrap tightly around the vehicle body to ensure maximum visibility from all rear angles. The modular design includes a removable lower trim moulding that allows for seamless fitment across both Lexus GX460 and Toyota Prado platforms. For a customized look, the exterior cladding can be paint-matched to your factory vehicle color. Installation is a straightforward plug-and-play process using factory wiring locations.

• Flush-mount design prevents damage on tight trails
• High-powered 40-LED reverse lights for superior night visibility
• Integrated sequential turn signals and signature perimeter lighting
• Matte black housing can be color-matched to the vehicle
• Simple plug-and-play installation
• Manufacturer Part Number: 5931-504-T
• 2-Year Warranty included

Fits select 2020-2025 Jeep Gladiator models. These Oracle Lighting Dual Reverse LED Flush Taillight Modules are engineered for owners requiring dedicated amber turn signal functionality. Designed primarily for EU and GCC spec vehicles, these modules replace the existing light units within the Oracle Flush Mount housing while maintaining high-output reverse illumination and adding a bright amber feature in place of the standard red flashing section.

For US-spec owners, these modules offer a customizable upgrade; by wiring the dedicated amber trigger leads to an auxiliary switch, they can be utilized as high-visibility amber chase lights for off-road use. Installation is straightforward, utilizing factory hardware and existing connectors with the addition of a single pin to the original plug.

• Functionality: Dual-purpose White LED reverse and Amber LED turn signal/chase light.
• Compatibility: Replaces modules in Oracle Lighting Flush Mount LED Tail Lights.
• Fitment: Fits all 2020-2025 Jeep Gladiator (JT) trim levels.
• Installation: Bolt-on replacement using original hardware; includes wiring for existing connectors.
• Manufacturer Part Number: 5915-JT-023
• Warranty: 1-Year Manufacturer Warranty.

Fits select 2018-2025 Jeep Wrangler JL models including Sport, Rubicon, Sahara, and Unlimited trims. Designed as a direct replacement for Oracle Lighting Flush Mount Taillight modules, these dual-function units allow owners to maintain or add a dedicated amber turn signal without sacrificing reverse light performance.

For EU or GCC Spec Jeep owners, these modules provide the necessary separate amber turn signal functionality required for road compliance. For US Spec vehicles, while the turn signal feature is primarily compatible with international wiring, these can be custom-wired to serve as high-visibility amber chase lights for off-road use. Each module features a switchback effect that toggles between the bright white reverse LEDs and the high-output amber turn signal LEDs.

Installation is straightforward: remove the original modules and secure the new units using your existing hardware. The wiring utilizes the factory-style connector with the addition of a pin to the original plug for full functionality.

• Dual-function design: High-output white reverse lights and bright amber turn signals.
• Compatible with Oracle Lighting Jeep Wrangler JL Flush Taillights.
• 10 high-powered LED reverse lights per module for maximum rear visibility.
• Plug-and-play design for EU/GCC spec vehicles (US spec requires additional wiring for amber trigger).
• Maintains factory mounting points and hardware for a clean, integrated look.
• Manufacturer Part Number: 5915-JL-023

Fits select 2021-2024 Ford Bronco models (Badlands, Base, Big Bend, Black Diamond, Everglades, First Edition, Heritage, Outer Banks, and Wildtrak) originally equipped with factory LED taillights.

Enhance the visibility and utility of your Oracle Lighting Ford Bronco Flush Mount Taillights with these Dual Function LED Modules. These replacement units allow you to integrate a dedicated high-intensity amber turn signal into your existing flush-mount setup. While standard modules provide high-output white reverse lighting, this upgrade adds a crisp amber signaling feature that is significantly more distinct than the factory red flashing section.

The modules are designed for a clean installation into the Oracle flush housings using your existing hardware. Electrical integration is achieved by connecting to the current wiring harness and adding a pin to the original plug to enable the secondary signal function.

• Manufacturer Part Number: 5915-FB-023
• Dual Functionality: High-output white reverse light and bright amber turn signal
• Application: Only compatible with Bronco models equipped with factory-spec LED taillights
• Installation: Uses factory hardware and requires simple pin addition to the wiring plug
• Safety: Distinct amber color provides better contrast for signaling than red LEDs

Fits 2015-2020 Ford F-150 (XL, XLT, Lariat, King Ranch, Platinum, Limited, Raptor, SSV, and Police Responder).

Modernize your truck's rear profile with the Oracle Lighting Flush Mount LED Tail Lights. This patent-pending design replaces bulky factory housings with a low-profile, modular solution that sits flush against the body, significantly reducing the risk of damage during off-road use or tight maneuvering. These units feature high-output LEDs for stop, tail, and turn signals, along with high-intensity reverse LED modules for improved rear visibility.

Engineered for a straightforward installation, these lights include plug-and-play adapters that eliminate the need for wire splicing. If your F-150 is equipped with factory cross-traffic sensors (BLIS), the modular design allows you to easily transfer the sensors into the new housings using the original factory hardware and provided connectors. The modular construction also facilitates customization; the light modules can be removed so the black housings can be painted to match your vehicle's body color.

• Manufacturer Part Number: 5913-504-T
• Finish: Tinted lens with black modular housing
• Lighting Features: Signature perimeter lighting with high-output LED modules
• Installation: True plug-and-play with factory-style connectors
• Compatibility: Retains factory cross-traffic (BLIS) sensors where equipped
• Design: Patent-pending flush-mount architecture engineered in the USA

Fits 2015-2020 Ford F-150 models including XL, XLT, Lariat, King Ranch, Platinum, Limited, Raptor, Police Responder, and SSV.

The Oracle Lighting Flush Mount LED Tail Lights provide a modern, low-profile aesthetic for the 2015-2020 Ford F-150. These patent-pending tail lights sit much tighter to the truck body than bulky factory housings, significantly reducing the profile to prevent damage during off-road use or tight maneuvering. The modular design features a removable Reverse Light and Stop/Tail/Turn module, allowing the black housing to be custom-painted for a seamless color-match. Engineered for total utility, these lights maintain full compatibility with original factory cross-traffic sensors.

• Integrated Sensor Support: Retain your factory cross-traffic (BLIS) sensors by swapping them into the new housings using original hardware and the included plug-and-play connectors.
• Plug-and-Play Installation: Includes specialized wiring adapters for a direct installation without the need for splicing, cutting, or permanent vehicle modifications.
• Signature Perimeter Lighting: High-output LED design provides improved visibility and a distinct, modern light signature.
• Modular Construction: Components disassemble quickly for custom painting or module maintenance.
• Finish: Standard Red lens with high-impact black housing.
• Manufacturer Part Number: 5913-504

Vehicle Fitment:

Fits 2016-2023 Toyota Tacoma models including SR, SR5, TRD Sport, TRD Off-Road, Limited, Trail, and TRD Pro.

Oracle Lighting Black Series Flush Style LED Tail Lights solve the common issue of protruding factory housings. By sitting significantly closer to the tailgate, these low-profile lights reduce the risk of tail light damage on tight trails while providing a streamlined, modern aesthetic. The modular design features high-powered integrated LED light bars for reverse illumination, delivering a combined 4,400 Lumens to eliminate the need for auxiliary backup lamps.

• High-output reverse lights: 4,400 Lumens of rear-facing illumination for superior nighttime visibility.
• Dynamic turn signals: Fluid sequential LED animation from the inside to the outside portion of the light.
• Signature perimeter lighting: Distinctive LED band provides a modern light signature and improved safety.
• Modular construction: Removable LED modules allow the black housings to be custom-painted to match body color.
• Plug-and-play installation: Includes wiring adapters for a direct connection to factory harnesses without splicing.
• Manufacturer Part Number: 5911-504-T

Each kit includes a pair of Gen 3 Toyota Tacoma flush mount tail lights and a detailed instruction guide. Designed and engineered in the USA, this patent-pending design provides a rugged yet refined lighting solution for trail and street use.

Fits 2016-2023 Toyota Tacoma models including Limited, SR, SR5, Trail, TRD Off-Road, TRD Pro, and TRD Sport.

Upgrade your Gen 3 Tacoma with the Oracle Lighting Flush Style LED Tail Lights. Engineered with a low-profile design, these units sit significantly closer to the body than factory assemblies, streamlining your truck's appearance and reducing the risk of tail light damage during off-road maneuvers or in tight spaces. This patent-pending design features a modular construction where the LED modules can be easily removed, allowing you to custom-paint the black housings to match your vehicle's body color.

• High-powered integrated reverse lights producing over 4,400 Lumens of illumination.
• Dynamic sequential turn signals with a fluid animated LED sequence.
• Signature LED perimeter lighting for improved visibility and modern styling.
• True plug-and-play installation with included adapters; no custom wiring or splicing needed.
• Designed and engineered by ORACLE Lighting in the USA.
• Manufacturer Part Number: 5911-504
• Includes a 2-Year Warranty.

Fits select 2021-2023 Ford F-150 models including XL, XLT, Lariat, King Ranch, Platinum, Limited, Raptor, and Tremor.

The Oracle Lighting Black Series Flush Style LED Tail Lights offer a streamlined, low-profile solution for F-150 owners looking to upgrade both aesthetics and off-road durability. By sitting significantly closer to the body than factory units, these lights reduce the risk of snagging or damaging the housings during tight maneuvers. This kit features a unique modular design with high-powered reverse lights, signature perimeter LED bands, and an animated sequential turn signal for improved visibility and modern styling.

Engineered for versatility, these tail lights include wiring adapters that ensure full compatibility with both factory halogen and LED-equipped trucks. The design retains full functionality of factory BLIS (Blind Spot Information System) cross-traffic sensors, which can be easily transferred into the new housings. For those seeking a color-matched look, the modular construction allows for easy disassembly, enabling the black housings to be painted to match your vehicle's paint code.

• Lumens: 4,400+ Lumens of rear-facing illumination for superior reverse visibility
• Functionality: Integrated high-output reverse lights, signature perimeter lighting, and sequential turn signals
• Construction: Modular low-profile design allows for easier custom painting of the housing
• Installation: Plug-and-play with included adapters for all 2021-2023 F-150 trims
• Compatibility: Retains factory BLIS cross-traffic sensor functionality
• Manufacturer Part Number: 5910-504-T

Includes: (1) Pair of Flush Mount LED Tail Lights and (1) Installation Guide.

Fits 2021-2023 Ford F-150 models including XL, XLT, Lariat, King Ranch, Platinum, Limited, Raptor, Tremor, SSV, and Police Responder.

Oracle Lighting Flush Style LED Tail Lights provide a low-profile, high-performance alternative to bulky factory housings. By sitting significantly closer to the truck bed, these lights reduce the risk of trail damage while creating a streamlined aesthetic. This modular system features integrated LED light bars for reverse illumination, outputting over 4,400 Lumens of rear-facing light to eliminate the need for auxiliary backup lamps.

Designed for a seamless install, these units are fully compatible with both factory halogen and LED-equipped models. If your truck features BLIS (Blind Spot Information System) cross-traffic sensors, the factory hardware and sensors swap directly into these housings using the included plug-and-play connectors. The modular construction allows the light assemblies to be easily removed from the black housings, facilitating custom paint-to-match applications for a truly integrated look.

• High-Output Reverse Lighting: Dual integrated LED light bars producing 4,400+ Lumens.
• Dynamic Signaling: Features signature perimeter lighting and animated sequential turn signal sequences.
• Low-Profile Design: Flush-mount styling minimizes protrusion to prevent impact damage.
• Plug-and-Play Installation: Includes wiring adapters for a tool-free electrical connection on all 2021-2023 F-150 trims.
• Modular Construction: Components can be disassembled for custom paint or serviceability.
• MPN: 5910-504

Includes: (2) Flush Style LED Tail Lights, wiring adapters, and installation guide.

Fits all 1986-1992 Jeep Comanche MJ models including Base, Chief, Eliminator, Laredo, Pioneer, X, and XLS trims.

ORACLE Lighting brings modern LED performance to the classic MJ platform with these direct-replacement tail lights. Designed to maintain a period-correct OEM appearance while providing significant output upgrades, these housings feature integrated LED Stop, Turn, and Parking functions for vastly improved visibility. Unlike traditional incandescent bulbs, these LEDs illuminate instantly, providing a critical safety advantage by giving following drivers more time to react during braking.

A major technical refinement is the high-powered integrated reverse light module. This system utilizes six high-output LEDs and mixed-beam reflector optics to produce over 1,000 lumens, delivering both wide-angle peripheral light and long-distance visibility when backing up in low-light conditions. These units feature a tinted lens for an aggressive, blacked-out aesthetic while maintaining high-intensity light transmission.

• Direct-fit for 1986-1992 Jeep Comanche MJ
• Aggressive tinted lens for a custom blacked-out appearance
• High-powered 1,000+ lumen LED reverse lights with mixed-beam optics
• Instant-on LED Stop, Turn, and Parking lamps for enhanced safety
• Durable construction designed for both on-road and off-road use
• Manufacturer Part Number: 5909-020

Fits 1986-1992 Jeep Comanche MJ models including Base, Chief, Custom, Eliminator, Laredo, Pioneer, X, and XLS.

Upgrade the lighting on your MJ platform with ORACLE Lighting LED tail lights. These units maintain a classic OEM appearance while replacing dated halogen bulbs with high-output LEDs for stop, turn, and parking lamp functions. LEDs illuminate significantly faster than incandescent bulbs, providing a critical safety advantage by alerting following drivers sooner during braking.

A standout feature of this upgrade is the integrated high-powered reverse light. This module utilizes six high-powered LEDs producing over 1,000 total lumens. The mixed-beam reflector optics are engineered to provide both peripheral light for wider visibility and distance projection to assist the driver when backing up in low-light conditions. The standard red lens option is designed to preserve the original factory aesthetic while delivering modern performance and reliability.

• Fits 1986-1992 Jeep Comanche MJ
• LED Stop, Turn, and Parking lights for improved response time
• High-powered reverse light: 6 LEDs, 1,000+ Lumens
• Mixed-beam reflector optics for optimal light distribution
• Standard Red Lens for an OE-style appearance
• Manufacturer Part Number: 5909-003

Fits 2017-2022 Ford F-250 and F-350 Super Duty trucks across all trim levels including XL, XLT, Lariat, King Ranch, Platinum, and Limited.

Oracle Lighting Black Series Flush Mount LED Tail Lights redefine the rear profile of your 2017-2022 Ford Super Duty. By eliminating the bulky protrusion of factory housings, these low-profile units significantly reduce the risk of tail light damage during tight maneuvers or off-road excursions. The modular design is engineered for enthusiasts; the reverse and stop/tail/turn modules can be easily removed from the black housings, allowing you to paint-match the bezels to your vehicle's body color for a seamless, custom finish.

Performance is at the core of this design, featuring high-powered LED reverse light bars that output over 4,400 Lumens of rear-facing illumination. Safety and visibility are further enhanced with signature perimeter lighting and a dynamic, sequential LED turn signal sequence that provides a fluid motion from the inside out. For trucks equipped with factory Blind Spot Information Systems, these housings are fully BLIS-compatible via a simple factory sensor swap-over.

• Flush-mount, low-profile design reduces protrusion and risk of impact damage
• Integrated LED reverse light bars producing 4,400+ lumens
• Dynamic sequential LED turn signal animation
• Signature LED perimeter lighting for a modern OEM-plus aesthetic
• Compatible with factory BLIS / cross-traffic sensors (requires sensor transfer)
• Modular construction allows for easy disassembly and custom paint matching
• Plug-and-play installation with included wiring adapters
• Manufacturer Part Number: 5896-504-T
• 2-year manufacturer warranty

Fits 2017-2022 Ford F-250 and F-350 Super Duty models including XL, XLT, Lariat, King Ranch, Platinum, and Limited.

Oracle Lighting’s Flush Mount LED Tail Lights offer a low-profile, streamlined solution for the latest generation Ford Super Duty. By protruding significantly less than factory housings, these lights drastically reduce the risk of impact damage during off-road use or tight maneuvering. The modular design allows the stop/tail/turn and reverse light modules to be easily removed from the black housing, facilitating custom color-matching to your truck's paint.

Visibility is significantly upgraded with integrated high-powered reverse light bars that output over 4,400 Lumens of rear-facing illumination, eliminating the need for auxiliary backup lamps. These lights also feature a signature perimeter LED band and a dynamic sequential turn signal effect that provides a fluid animated sequence from the inner to outer portion of the housing. This kit is fully compatible with factory Blind Spot Information System (BLIS) sensors through a simple swap-over process.

• Low-profile, flush-mount design reduces protrusion and damage risk
• Integrated high-output LED reverse lights (4,400+ total Lumens)
• Dynamic sequential LED turn signal animation
• Compatible with factory BLIS/cross-traffic sensors
• Modular housing design for easy custom painting
• Signature perimeter lighting for a modern OEM-plus appearance
• Plug-and-play installation with included wiring adapters
• Manufacturer Part Number: 5896-504
• 2-Year Warranty included

Fits 2021-2024 Ford Bronco (Badlands, Base, Big Bend, Black Diamond, Everglades, First Edition, Heritage Edition, Heritage Limited Edition, Outer Banks, and Wildtrak).

Upgrade your 6th Gen Bronco with the ORACLE Lighting Flush Style LED Taillights. Designed specifically for off-road enthusiasts, this low-profile design sits significantly closer to the body than factory units, which protrude several inches. By reducing this profile, you minimize the risk of catching your lights on trees, boulders, or other trail obstacles during tight maneuvers. This wraparound design not only protects your investment but also follows the Bronco's body lines for a sleek, integrated look.

These taillights provide a major boost in functional lighting. The signature LED perimeter lighting offers distinct styling and increases visibility from multiple rear angles. For backing up in low-light conditions, these units feature integrated high-powered reverse lights that function like built-in light bars, providing up to 8,000 lumens of rear-facing illumination. The tinted lens offers a custom aesthetic without compromising light output, and the plug-and-play installation ensures a straightforward upgrade using factory mounting points.

• Flush-mount, low-profile design reduces exposure to trail hazards
• Wraparound signature LED perimeter lighting for enhanced visibility
• High-powered integrated LED reverse lights (up to 8,000 lumens)
• Tinted lens for a sleek, modern aesthetic
• Simple plug-and-play installation
• Manufacturer Part Number: 5892-504-T
• 2-Year Warranty

Fits 2021-2024 Ford Bronco models (Badlands, Base, Big Bend, Black Diamond, Everglades, First Edition, Heritage Edition, Outer Banks, and Wildtrak) originally equipped with factory halogen taillights.

The Oracle Lighting Flush Mount LED Taillights solve a common problem for Ford Bronco owners: vulnerable factory housings that protrude several inches from the body. On tight trails, those factory units are easily damaged by trees, boulders, and obstacles. This innovative flush-mount design wraps tightly against the vehicle body, significantly reducing the profile to prevent trail damage while complementing the Bronco's original body lines.

These units aren't just about protection; they provide a massive upgrade in light output. The signature perimeter lighting ensures your vehicle is visible from any rear angle, while the high-powered integrated LED reverse lights function like a pair of rear-facing light bars. This plug-and-play solution replaces the factory halogen units without complex wiring, offering a sleek, modern aesthetic and superior durability.

• Low-profile flush-mount design reduces risk of trail-related damage
• Signature perimeter lighting for improved visibility and modern styling
• High-powered LED reverse lights provide up to 1,400 lumens of rear-facing illumination
• Wraparound design provides visibility from multiple rear angles
• Direct plug-and-play installation for models with factory halogen lights
• Manufacturer Part Number: 5892-504
• 2-Year Manufacturer Warranty

Fits 2007-2018 Jeep Wrangler JK and Wrangler Unlimited models (Rubicon, Sahara, Sport, Sport S, and X).

Protect your Jeep on the trail with the Oracle Lighting Flush Mount LED Tail Lights. Factory Wrangler tail lights protrude several inches from the body, making them vulnerable to damage from trees, boulders, and other trail obstacles. This patent-pending flush mount design sits tight to the body panel, significantly reducing the exposure profile to prevent costly trail damage while off-roading.

These lights feature a modern, low-profile aesthetic with a tinted lens and signature perimeter lighting for a unique visual identity. Beyond styling and durability, they offer high-powered LED reverse lights for superior visibility when backing up in dark off-road conditions or urban environments. The plug-and-play design ensures a direct replacement installation with no modifications required to the factory wiring or body panels.

• Manufacturer Part Number: 5891-504-T
• Finish: Tinted lens for a sleek, blacked-out look
• Flush Mount Design: Dramatically reduces vulnerability to trail damage
• High-Powered Reverse Lights: Enhanced brightness for safe backing
• Signature Perimeter Lighting: Distinctive LED pattern for improved visibility
• Installation: Easy plug-and-play, no modifications needed
• Award-Winning Innovation: Global Media Award recipient
• Warranty: 2-Year Manufacturer Warranty

Fits 2018-2025 Jeep Wrangler JL models, including Rubicon, Sport, Sahara, and Unlimited trims.

Upgrade your Jeep's rear illumination with the Oracle Lighting Flush Mount LED Tail Lights. Engineered specifically for the Wrangler JL platform, these lights feature an innovative low-profile design that sits nearly flush with the body. This tight wrap-around fitment significantly reduces the risk of snagging or breaking a tail light on tight trails while providing a sleek, modern aesthetic with a tinted lens finish.

These tail lights are a complete functional upgrade, featuring 12 high-powered LED reverse lights for superior visibility when backing up. The housing is fully compatible with factory Blind Spot Monitoring (BSM) sensors—simply swap your existing sensors into the Oracle assembly for a seamless transition. They are engineered to work with both base halogen and factory LED packages on North American models via a simple plug-and-play installation.

• 12 high-powered LED reverse lights for optimal rear illumination
• Low-profile flush-mount design protects against trail damage
• Signature LED perimeter lighting for improved visibility and styling
• Plug-and-play installation for easy setup
• Compatible with factory BSM (Blind Spot Monitoring) sensors
• Works with both base halogen and LED factory lighting packages
• Tinted lens for a custom, blacked-out appearance
• Manufacturer Part Number: 5884-504-T
• Domestic Patent # D1007014 | International Patent # ZL202130597903.3

Fits 2018-2025 Jeep Wrangler JL models including Sport, Sahara, and Rubicon. These ORACLE Lighting LED Flush Mount Tail Lights are engineered to replace bulky factory units with a low-profile, high-clearance design that sits tight to the body, significantly reducing the risk of damage while navigating tight trails.

Constructed for durability and visibility, these lights feature signature perimeter lighting and a high-output reverse light array containing 12 high-powered LEDs for superior rear illumination. This innovative design is fully compatible with North American model Wranglers equipped with either base or factory LED light packages. For vehicles equipped with Blind Spot Monitoring (BSM), the factory cross-traffic sensors can be easily transferred directly into the ORACLE assemblies to maintain full safety functionality.

• Low-profile flush mount design avoids trail damage
• 12 high-powered LED reverse lights for enhanced visibility
• Signature LED perimeter lighting
• Plug-and-play installation into factory wiring
• Retains factory cross-traffic BSM sensor functionality
• Compatible with 2018-2025 Jeep Wrangler JL mounting points
• Fits both base halogen and factory LED equipped models
• Manufacturer Part Number: 5884-504

Installation is a straightforward bolt-in process utilizing factory mounting points and typically takes 45-60 minutes with basic hand tools. This kit includes all necessary components to upgrade both driver and passenger side tail lights.