Maintain peak performance and response in your forced induction system with the TiAL Sport Q/QR Blow Off Valve Diaphragm Assembly. This genuine replacement part is designed to restore the seal integrity and actuation speed of your TiAL blow-off valve when the original diaphragm has become worn, torn, or fatigued over time.

Built to exacting tolerances, this assembly ensures consistent operation under high boost pressures and rapid vacuum cycles. It serves as a direct internal replacement for both the atmospheric TiAL Q and recirculating TiAL QR valve series, allowing you to rebuild your valve rather than replacing the entire unit.

• Genuine TiAL Sport replacement component
• Compatible with all TiAL Q and QR series Blow Off Valves
• Restores proper valve actuation and high-pressure sealing
• Engineered for long-term durability in high-heat engine environments
• Direct fitment for straightforward maintenance

Maintain peak turbocharger performance and precise boost control with a genuine TiAL Sport MVS Diaphragm Assembly. This direct replacement component is engineered to restore the integrity of your MVS 38mm external wastegate, addressing common issues like boost leaks or inconsistent gate operation caused by a worn or ruptured factory diaphragm.

• Direct replacement for all TiAL Sport MVS series 38mm external wastegates
• Constructed from high-temperature reinforced Nomex silicone for durability under extreme engine bay heat
• Restores proper wastegate sealing and valve response
• Essential maintenance item for high-mileage or high-heat forced induction setups
• Manufacturer Part Number: MVS Diaphragm

The TiAL Sport MVR Diaphragm Assembly is the genuine replacement component designed to maintain or rebuild the MVR series external wastegate. Over time, extreme under-hood heat cycles and high boost pressures can fatigue the internal diaphragm, leading to boost leaks, inconsistent gate operation, or boost creep. This factory-spec assembly allows you to restore the actuator's seal integrity and ensure precise response to boost control signals.

• Genuine TiAL Sport replacement part for MVR series wastegates
• Engineered to withstand high-temperature environments and high-duty cycles
• Direct fit for the internal actuator housing
• Critical for maintaining consistent manifold pressure and wastegate reliability

Maintain precise boost control and wastegate reliability with this genuine TiAL Sport replacement diaphragm assembly. Engineered specifically for use with TiAL F46 (46mm) and V60 (60mm) external wastegates, this assembly allows you to service your wastegate actuator and restore factory-level performance without replacing the entire unit.

The diaphragm is constructed from high-temperature, Nomex-reinforced silicone to withstand the extreme heat and constant pressure cycles found in high-performance turbocharged engine bays. A worn or torn diaphragm can lead to dangerous boost spikes or a total loss of boost control; replacing it ensures the valve responds accurately to your boost controller's signals.

• Compatible with TiAL Sport F46 and V60 external wastegates
• High-temperature Nomex-reinforced silicone construction for durability
• Restores consistent boost response and actuator sealing
• Genuine TiAL Sport replacement component
• Fits 46mm and 60mm actuator housings

This genuine TiAL Sport diaphragm assembly is the direct replacement component for 38mm, 41mm, and 44mm wastegate units. Over time, extreme manifold heat and constant pressure cycling can lead to diaphragm fatigue or tearing, resulting in inconsistent boost levels and sluggish actuator response. Installing a fresh assembly restores the pneumatic seal within the wastegate housing, ensuring the valve opens and closes precisely according to your boost controller or spring pressure.

• Genuine TiAL Sport replacement component
• Compatible with 38mm, 41mm, and 44mm external wastegate models
• High-temperature reinforced elastomer construction for long-term durability
• Restores accurate boost control and prevents actuator pressure leaks
• Designed for exact fitment to maintain original equipment performance

The TiAL Sport V60 Wastegate Special Diaphragm is a critical service component designed to restore precise boost control to your turbocharger system. Over time, the internal diaphragm in a wastegate can degrade or harden from extreme under-hood temperatures and high-duty cycles, leading to boost leaks or inconsistent pressure management.

This genuine TiAL replacement part (MPN: 005211) is engineered specifically for the V60 series 60mm external wastegate. It is constructed from high-temperature reinforced silicone, ensuring the flexible seal remains responsive and durable under heavy thermal stress. Installing a fresh diaphragm is a standard part of wastegate maintenance to ensure your forced induction system operates at peak efficiency.

• Direct replacement for TiAL V60 60mm external wastegates
• High-temperature reinforced silicone construction for thermal resistance
• Restores consistent boost response and wastegate actuation
• Genuine TiAL Sport component (Part Number: 005211)

The Turbosmart IWG75 Internal Wastegate Clevis provides the critical mechanical link between the actuator rod and the turbocharger flapper arm. Precision-engineered for a secure fit, this component ensures consistent wastegate operation and accurate boost management under high-heat conditions.

As a genuine Turbosmart service part, it is designed for durability and reliable performance on IWG75 series actuators requiring a quarter-inch bore. It replaces worn or damaged clevises to restore the mechanical integrity of your turbocharging system's boost control hardware.

• Manufacturer Part Number: TS-0600-3004
• Bore Diameter: 6.3mm (.25in)
• Series Compatibility: Turbosmart IWG75 Internal Wastegate Actuators
• Function: Connects actuator rod to wastegate flapper arm

The Turbosmart IWG75 Internal Wastegate Clevis provides a secure, precise connection between the wastegate actuator rod and the turbocharger flapper arm. Engineered as a direct replacement component for Turbosmart IWG75 series actuators, this clevis ensures smooth mechanical operation and reliable boost management.

Constructed from high-strength materials to withstand the extreme heat and vibration of the engine bay, this 8mm (.31in) clevis replaces worn or damaged hardware that can lead to boost leaks or inconsistent actuator performance. It is a vital service part for maintaining the response and durability of your Turbosmart internal wastegate system.

• Compatible Series: Turbosmart IWG75 Actuators
• Clevis Bore: 8mm (.31in)
• Application: Internal Wastegate Actuator Linkage
• Manufacturer Part Number: TS-0600-3003

The Turbosmart IWG75 Internal Wastegate Clevis is a precision-engineered linkage component designed for the universal IWG75 actuator range. This clevis facilitates a secure, mechanical connection between the wastegate actuator rod and the turbocharger's wastegate flapper arm, ensuring consistent boost response and eliminating slack in the system.

Constructed to maintain tight tolerances under high-temperature conditions, this hardware is ideal for custom turbocharger configurations or as a direct replacement for worn-out clevis pins and rod ends that cause boost fluctuations.

• Manufacturer Part Number: TS-0600-3002
• Hole Diameter: 8.2mm (0.32in)
• Thread Specification: M6
• Compatibility: Specifically suits Turbosmart IWG75 Internal Wastegate Actuator series
• Design: Heavy-duty construction for reliable operation in high-heat environments

The Turbosmart IWG75 Internal Wastegate Clevis is a precision-machined replacement component designed for the Turbosmart IWG75 universal internal wastegate range. This clevis provides a critical linkage point between the actuator rod and the turbocharger's wastegate flapper arm, ensuring smooth operation and precise boost regulation.

Built to endure the high-heat environment of the exhaust housing, this clevis features a 6.3mm (.25in) bore to accommodate standard pivot pins and maintain a slop-free connection.

• Genuine Turbosmart IWG75 series component
• Bore Size: 6.3mm (0.25 inch)
• Application: Universal fitment for IWG75 actuators
• High-strength construction for thermal durability
• Manufacturer Part Number: TS-0600-3001

The Turbosmart IWG75 Single Port Diaphragm is a precision-engineered replacement component designed to restore the response and reliability of your internal wastegate actuator. Over time, internal diaphragms can become brittle or tear due to high-heat cycles and constant pressure fluctuations, leading to inconsistent boost control or boost leaks. This single-port diaphragm allows for a direct rebuild of the actuator housing to maintain factory-level performance.

• Direct replacement for Turbosmart IWG75 Single Port actuator ranges
• High-grade elastomer construction for thermal stability and pressure resistance
• Restores consistent boost control and actuator movement
• Manufacturer Part Number: TS-0600-2001

Note on Compatibility: This part is specifically for the standard Single Port IWG75. It is NOT compatible with Turbosmart IWG75 Twin Port or IWGHP (High Pressure) actuator models.

The Turbosmart GenV WG60 Outlet V-Band Clamp is a dedicated replacement component engineered for the GenV Power-Gate60 external wastegate range. Designed to provide a secure, high-pressure seal between the wastegate body and the discharge piping, this clamp is critical for maintaining exhaust system integrity and consistent boost control.

• Fits Turbosmart GenV WG60 (60mm) external wastegates
• Heavy-duty stainless steel construction for superior thermal stability and corrosion resistance
• Equipped with a high-tensile fine-thread bolt and nut for precise torque application
• Ensures a leak-free connection at the wastegate outlet flange
• Manufacturer Part Number: TS-0555-3004

The Turbosmart GenV WG60 Inlet V-Band Clamp is a precision-engineered replacement component for the inlet side of the GenV external wastegate range. This clamp ensures a secure, leak-free connection between the wastegate and the exhaust manifold or adapter, maintaining critical boost control integrity.

Constructed from high-grade stainless steel to withstand extreme thermal cycling and vibration, this clamp (MPN: TS-0555-3003) is built for the rigors of high-performance turbocharged applications. The assembly includes a fine-thread bolt and nut, allowing for precise tensioning and a consistent seal across the flange diameter.

• Specifically designed for the Turbosmart GenV WG60 Wastegate series
• Positions on the wastegate inlet flange
• High-strength stainless steel construction for corrosion resistance
• Includes fine-thread mounting hardware for secure fastening
• Genuine Turbosmart component (Part Number: TS-0555-3003)

The Turbosmart GenV WG50 Outlet V-Band Clamp is a precision-engineered replacement component for the GenV Pro-Gate 50 external wastegate range. This clamp is designed to withstand extreme thermal cycling while maintaining a leak-free seal between the wastegate outlet flange and the dump pipe.

• Manufactured from high-grade stainless steel for superior corrosion resistance and durability in high-heat environments.
• Features a fine-thread bolt and nut assembly for precise tensioning and a secure, vibration-resistant fit.
• Direct replacement hardware for the Turbosmart GenV WG50 (50mm) external wastegate outlet.
• Manufacturer Part Number: TS-0554-3004

The Turbosmart GenV WG50 Inlet V-Band Clamp is a precision-engineered replacement component for the ProGate50 external wastegate series. Designed to secure the wastegate unit to the exhaust manifold inlet flange, this clamp provides the necessary clamping force to maintain a leak-free seal under the extreme pressures and temperatures of a high-performance exhaust system.

Fabricated from durable stainless steel, this V-band is built to withstand repeated heat cycling without compromising structural integrity or corrosion resistance. The assembly includes specialized fine-thread hardware for precise tensioning, ensuring the wastegate remains securely seated even in high-vibration racing environments.

• Fits Turbosmart GenV WG50 (ProGate 50mm) external wastegates
• High-grade stainless steel construction for maximum heat resistance
• Includes dedicated fine-thread bolt and nut for reliable fastening
• Ensures airtight sealing between the wastegate and inlet flange
• Genuine Turbosmart replacement hardware: TS-0554-3003

Ensure a secure, leak-free seal for your wastegate assembly with the Turbosmart GenV WG45 Inlet V-Band Clamp. This genuine Turbosmart component (MPN: TS-0553-3003) is the exact hardware used in the hand assembly of their GenV wastegates, making it the preferred choice for servicing, rebuilding, or replacing lost hardware during a manifold swap or turbocharger upgrade.

Designed specifically for the inlet side of the Hyper-Gate45, this clamp provides the consistent tension and clamping force necessary to withstand extreme exhaust temperatures and high-pressure environments. Because it is a factory-spec spare, it guarantees perfect fitment with Turbosmart GenV flanges without the clearance or sealing issues often found in universal alternatives.

• Fits Turbosmart GenV WG45 (Hyper-Gate45) external wastegates
• Specifically designed for the wastegate inlet flange connection
• Ensures a high-integrity, leak-free exhaust seal
• Genuine Turbosmart factory replacement hardware
• Manufacturer Part Number: TS-0553-3003

The Turbosmart GenV WG40 Outlet V-Band Clamp (TS-0552-3004) is engineered as a precision-fit component for the outlet side of the GenV Comp-Gate40 external wastegate range. This clamp provides the necessary clamping force to ensure a reliable, leak-free seal between the wastegate and the exhaust discharge pipe under high-temperature conditions.

• Specifically designed for the Turbosmart GenV WG40 (Comp-Gate40) series wastegates
• Constructed from high-grade stainless steel for maximum durability and corrosion resistance
• Equipped with high-strength fine-thread bolts and nuts for accurate torque application
• Ensures a secure mechanical connection for high-vibration automotive environments
• Manufacturer Part Number: TS-0552-3004

Ensure a secure, leak-free seal on your high-performance wastegate assembly with the Turbosmart GenV V-Band Clamp. This precision-engineered hardware (TS-0552-3003) provides the consistent clamping force required for high-temperature and high-pressure exhaust environments, serving as a direct replacement for worn or lost factory clamps.

• Fits GenV CompGate40 Inlet
• Fits GenV HyperGate45 Outlet
• Fits GenV ALV40 Anti-Lag Valve Outlet
• Designed for high-heat durability and corrosion resistance
• Manufacturer Part Number: TS-0552-3003

Fitment Note: This clamp is specifically for GenV applications. It does not suit CompGate40 outlets, HyperGate45 inlets, ALV Anti-Lag Valve inlets, or any Gen4 series external wastegates.

The Turbosmart GenV Actuator Collar Tool (TS-0550-3014) is a specialized service tool engineered for the precise assembly and adjustment of GenV external wastegates. It provides the necessary leverage and specific engagement points required to securely tighten or loosen the actuator locking collar without marring the anodized finish or slipping during high-torque adjustments.

This tool is essential for technicians and enthusiasts performing spring swaps or routine maintenance, ensuring that the actuator is properly seated and locked to maintain consistent performance. Its heavy-duty construction is designed to withstand frequent shop use while maintaining tight tolerances for a perfect fit on the GenV collar.

• Fits Turbosmart GenV WG45 (Hyper-Gate 45) and WG50 (Pro-Gate 50) external wastegates
• Ensures secure locking for consistent spring pressure and performance
• Designed to prevent damage to the actuator housing and locking ring
• Precision-cut profile for maximum engagement
• Manufacturer Part Number: TS-0550-3014

Note: This tool is specifically sized for GenV WG45 and WG50 wastegates. It is not compatible with other wastegate sizes, RacePort, or PowerPort Blow Off Valves.

The Turbosmart GenV Actuator Collar Tool (TS-0550-3013) is a specialized instrument engineered for the precise assembly and disassembly of GenV external wastegates. Designed specifically for the WG38 Ultra-Gate and WG40 Comp-Gate series, this tool provides the necessary interface to rotate the locking collar securely without slipping or marring the component's finish.

Constructed with a lightweight profile and an integrated handle, this tool allows for controlled manipulation in tight engine bays where traditional wrenches often cannot reach. It is an essential addition to any technician's toolbox for safely changing wastegate springs or re-clocking the actuator cap while protecting the integrity of the diaphragm housing and locking mechanism.

• Specifically fits Turbosmart GenV WG38 and WG40 external wastegate locking collars
• Precision-notched design prevents damage to the actuator during installation or removal
• Low-profile handle facilitates use in confined engine compartments
• Engineered for consistent torque application across the collar surface
• Manufacturer Part Number: TS-0550-3013

The Turbosmart GenV CG 98mm Diaphragm Replacement Kit (TS-0550-3006) is a precision-engineered service component designed specifically for Compressed Gas (CG) and CO2-controlled wastegate systems. This kit allows you to restore the internal sealing and boost response of your GenV Power-Gate60 CG, ensuring the high-pressure handling capabilities required for CO2-actuated setups.

• Fits Turbosmart GenV CG (Compressed Gas) and CO2-controlled 60mm Power-Gate wastegates.
• Genuine Turbosmart 98mm replacement diaphragm.
• Engineered for the high-pressure demands of CO2-based boost control systems.
• Restores consistent boost response and prevents internal pressure leaks.
• Does not suit Gen4 or earlier wastegate models.
• Manufacturer Part Number: TS-0550-3006

Restore your wastegate's response and reliability with the Turbosmart Gen V 84mm Diaphragm Replacement Kit. Designed specifically for servicing Turbosmart Gen V HyperGate45 and ProGate50 standard external wastegates, this kit provides a complete internal overhaul to ensure consistent boost control and eliminate potential leaks caused by worn or heat-cycled components.

• Fits Turbosmart Gen V HyperGate45 (45mm) and ProGate50 (50mm) standard external wastegates.
• Includes high-temperature 84mm diaphragm for maximum durability under extreme thermal loads.
• Comprehensive kit includes necessary springs and internal hardware for a full rebuild.
• Direct replacement for worn factory internals to maintain peak pneumatic performance.
• Manufacturer Part Number: TS-0550-3005

The Turbosmart Gen V 74mm Diaphragm Replacement Kit is a precision-engineered service component designed to restore the seal integrity and boost response of your external wastegate. Over time, the extreme heat cycles and high-pressure duty cycles of a turbocharged engine can wear down internal seals. This kit allows for a direct internal refresh to maintain consistent manifold pressure and gate operation.

• Manufacturer Part Number: TS-0550-3004
• Diaphragm Diameter: 74mm
• Designed specifically for Gen V 38mm and 40mm external wastegates
• Restores pneumatic control and valve response

Note on Compatibility: This kit is strictly for Gen V series wastegates. It is not compatible with Gen 4 or earlier wastegate models. It does not suit Gen V CG/CO2-specific wastegates or the ALV40 Anti-Lag Valve (refer to part number TS-0550-3059 for those applications).

The Turbosmart Locking Collar C-Spanner Tool (TS-0505-3008) provides the precise leverage and engagement required to safely adjust or disassemble Turbosmart external wastegates. Engineered specifically for the WG40 (Comp-Gate40) locking collar system, this tool allows for controlled torque when loosening or tightening the actuator cap, eliminating the risk of slipping or marring the anodized finish that often occurs with generic pliers or screwdrivers.

• Designed specifically for Turbosmart WG40/Comp-Gate40 locking collars
• Precision-cut C-spanner profile ensures maximum contact with collar notches
• Facilitates safe disassembly for spring rate changes and cap orientation adjustments
• Heavy-duty construction for reliable use in professional shop environments
• Manufacturer Part Number: TS-0505-3008

Secure your Turbosmart external wastegate assembly with this precision-engineered 74mm locking collar. Designed to maintain a reliable seal and housing integrity, this collar is a direct replacement or upgrade for Gen 4 and IWG series wastegates. The stainless steel construction provides superior heat resistance and durability in the high-temperature environment of the exhaust manifold.

• Fits Turbosmart UltraGate38 (38mm), CompGate40 (40mm), and HyperGate45 (45mm) external wastegates, including HP models
• 74mm diameter specifically sized for Gen 4 and IWG series wastegate housings
• Durable stainless steel construction with a protective anodized finish for corrosion resistance
• Includes all necessary hardware for a complete and secure installation
• Manufacturer Part Number: TS-0505-3007

Maintain precise boost control and actuator response with the genuine Turbosmart WG40 Diaphragm Assembly (TS-0505-3006). This direct replacement component is engineered to restore the performance of your 40mm Comp-Gate40 external wastegate, ensuring a reliable seal and consistent operation under the extreme heat and pressure of high-performance turbocharged applications.

Over time, the diaphragm in an external wastegate can experience fatigue from heat cycling and mechanical stress. Replacing a worn diaphragm is a critical maintenance step to prevent boost leaks and protect your engine from overboost conditions. Manufactured in Turbosmart's Sydney, Australia facility, this assembly is built to the same rigorous standards as the original equipment for maximum durability and reliability.

• Direct replacement for Turbosmart WG40 (40mm Comp-Gate40) external wastegates
• Engineered to maintain accurate boost regulation and valve timing
• High-temperature resistant reinforced construction for long-term service life
• Genuine Turbosmart replacement part for guaranteed fitment
• Manufacturer Part Number: TS-0505-3006

Restore the sealing integrity and boost control of your Turbosmart external wastegate with this genuine Turbosmart Diaphragm Assembly and Valve Guide O-ring (TS-0501-3001). Over time, extreme thermal cycles can fatigue internal seals, leading to boost leaks or inconsistent wastegate response. This replacement kit is engineered to provide a tight seal even under high boost pressures, ensuring your wastegate operates exactly as calibrated.

• Direct replacement for Turbosmart ProGate50 (50mm) and PowerGate60 (60mm) external wastegates.
• Compatible with discontinued legacy 6-bolt WG38 and WG45 models.
• Large-diameter diaphragm design optimized for maximum sealing at higher boost levels.
• Precision valve guide O-ring included to ensure leak-free operation.
• Genuine Turbosmart component ensures exact fitment and material compatibility.
• Manufacturer Part Number: TS-0501-3001

The Turbosmart BlackBox (TS-0305-1001) is a sophisticated electronic wastegate (eWG) controller designed to bridge the gap between traditional boost control systems and modern electronic actuators. By translating standard PWM or CAN-bus signals into high-current motor control, the BlackBox allows for precise, high-speed gate positioning without the need for vacuum lines, solenoids, or compressed air sources.

• Precision Control: Enables finite control over wastegate position for optimized boost curves and improved turbocharger response.
• High-Current Driver: Features an integrated H-bridge driver capable of handling the high amperage required by electronic actuators.
• Dual Input Options: Accepts standard 0-5V PWM signals from most aftermarket ECUs or integrates via CAN-bus for advanced data feedback.
• Thermal Efficiency: Designed with a compact, heat-dissipating housing to maintain performance in demanding engine bay environments.
• Simplified Plumbing: Eliminates pneumatic complexities by replacing hoses and boost control solenoids with a direct electrical interface.
• MPN: TS-0305-1001

Fits select 2004-2007 Dodge Ram 2500 and 3500 trucks (5.9L Common Rail Cummins).

The ATS Diesel Wastegate Solenoid Harness Jumper is a necessary solution for 2004.5-2007 Dodge 5.9L Cummins owners upgrading their turbocharger system. When installing an aftermarket turbo that does not utilize the factory electronic wastegate, this jumper prevents the ECM from triggering diagnostic trouble codes (DTCs) or a limp-mode condition by completing the circuit.

Built to withstand the high-heat environment of the Cummins engine bay, this plug-and-play jumper requires no wire cutting or splicing, ensuring a clean and reversible installation.

• Manufacturer Part Number: 202-010-2272
• Application: 2004.5+ Dodge 5.9L Common Rail Cummins
• Function: Bypasses factory electronic wastegate to prevent DTCs
• Installation: Direct plug-and-play into factory harness
• Build: High-quality connectors for reliable electrical contact