Fits select 2010-2020 Porsche 911, Panamera, Boxster, and 718 Boxster/Cayman models. See the fitment table below for full compatibility.

H&R Trak+ DR Series Wheel Spacers widen your vehicle's track for improved handling and a flush, aggressive stance. These 5mm spacers are engineered to fit between the wheel and the hub, requiring longer wheel bolts (sold separately) for a secure installation. By moving the wheels out to the fender line, they provide increased lateral support and a custom look without compromising ride quality.

Unlike generic spacers, Trak+ spacers are manufactured from a proprietary aluminum/magnesium alloy that offers higher tensile strength than standard 6061-T6 billet. They are hubcentric and feature a full-contact hub—matching the factory Porsche hub design—to ensure even load distribution and eliminate vibration at high speeds.

• Width: 5mm
• Bolt Pattern: 5/130
• Center Bore: 71.6mm
• Thread Type: 14x1.5
• Series: DR Series
• Construction: Proprietary high-tensile strength alloy
• Finish: Hubcentric for precise fitment
• Origin: Made in Germany
• MPN: 10957161

Fits select 1997-2014 BMW 5 Series, X5, and X6 models. These H&R Trak+ DR Series 5mm wheel spacers are engineered to move your wheels outward for a flush fender fitment, instantly improving your vehicle's stance and lateral stability. By widening the track, these spacers enhance handling characteristics and provide a more aggressive aesthetic.

Constructed in Germany from a proprietary aluminum/magnesium alloy, these spacers offer higher tensile strength than standard 6061-T6 billet aluminum while remaining lightweight. The hubcentric design features a full-contact hub to ensure even load distribution and lateral support, maintaining the smooth ride quality of the factory setup. Please note that DR Series spacers require extended-length wheel bolts for proper installation.

• Thickness: 5mm
• Bolt Pattern: 5/120
• Center Bore: 74mm
• Thread Pitch: 12x1.5
• Series: DR
• Material: Proprietary High-Tensile Alloy
• Manufacturing: Made in Germany
• Manufacturer Part Number: 1075740

Fits select 2012-2020 BMW (2, 3, 4, 5, 6 Series, M2, M3, M4, M5, M6) and Mini Cooper Paceman models.

H&R Trak+ DR Series Wheel Spacers widen your vehicle's track by 5mm, pushing the wheels out to be flush with the fender for a more aggressive stance and improved lateral stability. These spacers are engineered to solve the problem of recessed wheels, providing both aesthetic improvement and a broader contact patch for better handling.

Manufactured from a proprietary aluminum/magnesium alloy, these spacers offer higher tensile strength than standard 6061-T6 billet aluminum while remaining exceptionally lightweight. The hubcentric design features a full-contact hub that replicates the factory geometry for precise wheel centering and vibration-free performance. As a DR Series component, these spacers fit between the wheel and hub and require longer wheel bolts for safe installation.

• Thickness: 5mm
• Bolt Pattern: 5/120
• Center Bore: 72.5mm
• Thread Pitch: 14x1.25
• Material: Proprietary High-Strength Alloy
• Design: Hubcentric for even load distribution
• Manufacturer Part Number: 1075726
• Country of Origin: Germany

Fits select 1982-2018 BMW models including 1, 3, 5, 6, 7, 8 Series, X1, X3, X5, X6, Z3, Z4, and Z8.

H&R Trak+ DR Series Wheel Spacers widen your vehicle's track to push wheels flush with the fender, instantly improving both aesthetic stance and lateral stability. These hubcentric spacers are engineered with a full-contact hub face—mirroring the factory BMW hub design—to ensure even load distribution and eliminate vibration at high speeds.

Constructed in Germany from a proprietary lightweight aluminum/magnesium alloy, these spacers possess a higher tensile strength than standard 6061-T6 billet. The DR Series design fits between the wheel and hub, requiring longer wheel bolts (sold separately) for a secure installation.

• Part Number: 1075725SW
• Thickness: 5mm
• Bolt Pattern: 5/120
• Center Bore: 72.5mm
• Thread Pitch: 12x1.5
• Finish: Black Anodized
• Material: High-tensile proprietary alloy
• Manufacturing: Made in Germany

Fits 2005-2015 Ford Mustang models (V6, EcoBoost, GT, and Shelby variants).

H&R Trak+ DR Series Wheel Spacers widen your vehicle's track to improve handling performance and achieve a flush, aggressive stance. These 5mm spacers move the wheels out to the fender lip, eliminating the factory gap and improving lateral stability. Engineered for precision, these hubcentric spacers feature a full-contact hub design to ensure even load distribution and a vibration-free ride.

Unlike standard 6061-T6 billet, H&R Trak+ spacers are manufactured from a proprietary aluminum/magnesium alloy with a significantly higher tensile strength. The DR Series design fits between the wheel and the hub; installation requires longer wheel bolts or studs (sold separately) to ensure proper thread engagement.

• Thickness: 5mm
• Bolt Pattern: 5/114.3
• Center Bore: 70.5mm
• Thread Type: 1/2in. UNF
• Series: DR Series
• Material: High-tensile proprietary aluminum/magnesium alloy
• Finish: Hard anodized for durability
• Manufacturing: Made in Germany
• Manufacturer Part Number: 1065705

Vehicle Fitment

Fits select 1991-2009 Acura Legend, NSX, and Honda S2000 models.

H&R Trak+ Wheel Spacers move your wheels out to be flush with the fender, instantly providing a more aggressive stance and improved lateral stability. These DRS Series spacers are designed to replace your existing wheel studs with the included longer versions, ensuring proper thread engagement for a secure fitment.

Manufactured in Germany from a proprietary lightweight aluminum/magnesium alloy, these spacers offer higher tensile strength than standard 6061-T6 billet. The hubcentric design features a full-contact hub to match the factory geometry, ensuring even load distribution and a vibration-free ride.

• Thickness: 5mm
• Bolt Pattern: 5/114.3
• Center Bore: 70.1mm
• Thread Type: 12x1.5
• Series: DRS
• Material: High-tensile proprietary alloy
• MPN: 1065700
• Origin: Made in Germany

Fits select 1990-2012 Mitsubishi 3000GT and Eclipse models.

H&R Trak+ Wheel Spacers widen your vehicle's track to move the wheels out until they are flush with the fender, instantly improving both stance and lateral stability. The DRS Series spacers are designed to fit between the wheel and the hub, requiring the replacement of existing wheel studs with the longer versions included in the kit or available separately.

Unlike many competitors using standard 6061-T6 aluminum, H&R Trak+ spacers are manufactured from a proprietary aluminum/magnesium alloy. This material provides significantly higher tensile strength while remaining lightweight. Every spacer is hubcentric, featuring a full-contact hub flange that mirrors the factory design to ensure even load distribution and a vibration-free ride.

• Thickness: 5mm
• Bolt Pattern: 5/114.3
• Center Bore: 67.1mm
• Thread Type: 12x1.5
• Series: DRS
• Material: High-strength proprietary lightweight alloy
• Finish: Hard anodized for durability and corrosion resistance
• Manufacturer Part Number: 10656715
• Origin: Made in Germany

Fits select 1993-2014 Ford, Lincoln, Mazda, and Mercury vehicles including Fusion, MX-5 Miata, RX-8, and Mazda 3/5/6 models. These H&R Trak+ DRS Series wheel spacers widen the vehicle track by 5mm, moving the wheels out to be flush with the fenders for improved lateral stability and a more aggressive stance.

Constructed from a proprietary aluminum/magnesium alloy, these spacers offer higher tensile strength than standard 6061-T6 billet aluminum while remaining lightweight. The hubcentric design features a full-contact hub to match the factory geometry, ensuring even load distribution and a vibration-free fit. As part of the DRS Series, these spacers require replacing the factory wheel studs with the included longer H&R studs to maintain proper thread engagement.

• Thickness: 5mm
• Bolt Pattern: 5/114.3
• Center Bore: 67.1mm
• Thread Type: 12x1.5
• Series: Trak+ DRS
• Material: Proprietary High-Strength Alloy
• Manufacturing: Made in Germany
• MPN: 10656710

Fits select 1987-2015 Nissan and Infiniti models including 240SX, 300ZX, 350Z, G35, G37, and Q60. These H&R Trak+ 5mm DRS Series Wheel Spacers provide a wider, more aggressive stance by pushing your wheels out to be flush with the fender. This not only improves the aesthetic of your vehicle but also enhances lateral stability and handling by widening the track.

Manufactured in Germany from a proprietary lightweight aluminum/magnesium alloy, these spacers offer higher tensile strength than standard 6061-T6 billet aluminum. The hubcentric design features a full-contact hub to ensure even load distribution and eliminate vibration. As part of the DRS series, these spacers include longer wheel studs that must be installed to replace the factory hardware, ensuring proper thread engagement.

• Thickness: 5mm
• Bolt Pattern: 5/114.3 (5x4.5)
• Center Bore: 66.2mm
• Thread Pitch: 12x1.25
• Series: Trak+ DRS
• Material: Proprietary high-strength alloy
• Manufacturer Part Number: 1065662

Fits select 1991-2020 Acura and Honda models (including NSX, S2000, Civic, and Accord) with a 5x114.3 bolt pattern and 64.1mm center bore.

H&R Trak+ DRS Series Wheel Spacers widen your vehicle's track for improved handling and a flush, aggressive stance. These spacers are engineered to be hubcentric, utilizing a full-contact hub design similar to factory specifications to ensure even load distribution and eliminate vibration. Unlike common 6061-T6 billet aluminum spacers, Trak+ spacers are manufactured from a proprietary lightweight aluminum/magnesium alloy with significantly higher tensile strength for maximum durability.

The DRS Series is designed for applications where the spacer is placed between the wheel and the hub; this kit requires the removal of factory studs and installation of the included longer H&R wheel studs to ensure proper thread engagement.

• Thickness: 5mm
• Bolt Pattern: 5/114.3
• Center Bore: 64.1mm
• Thread Type: 12x1.5
• Series: DRS
• Material: Proprietary high-tensile strength alloy
• Manufacturing: Made in Germany
• Part Number: 1065640

Fits select 1986-2015 Lexus and Toyota models, including GS, IS, LS, SC, RX, Camry, Matrix, MR2, Solara, and Supra. These H&R Trak+ 5mm DRS Series spacers are designed to widen the vehicle track, allowing for a flush wheel-to-fender fitment and improved lateral stability.

Unlike generic spacers, H&R Trak+ units are hubcentric, featuring a full-contact hub design that centers the wheel perfectly to prevent vibration. The DRS Series specifically includes longer wheel studs that must be swapped with the factory studs to ensure proper thread engagement with the 5mm added thickness. They are manufactured from a proprietary aluminum/magnesium alloy that provides higher tensile strength than standard 6061-T6 billet, reducing unsprung weight while maintaining high load-bearing capacity.

• Thickness: 5mm
• Bolt Pattern: 5/114.3
• Center Bore: 60.1mm
• Thread Type: 12x1.5
• Series: DRS (includes extended studs)
• Material: High-strength proprietary light alloy
• Manufacturing: Made in Germany
• Manufacturer Part Number: 10656014

Fits select 1972-2020 Audi, Mercedes-Benz, Porsche, and Chrysler vehicles.

H&R Trak+ DR Series Wheel Spacers widen your vehicle's track by 5mm per side, pushing the wheels out to be flush with the fenders. This instantly improves the vehicle's stance and increases lateral stability. Unlike generic spacers, these are hubcentric and feature a full-contact hub design—matching the factory hub profile to ensure even load force distribution and a vibration-free ride.

Engineered and manufactured in Germany, Trak+ spacers are CNC-machined from a proprietary aluminum/magnesium alloy that provides higher tensile strength than standard 6061-T6 billet aluminum. This results in a component that is both stronger and lighter. The black finish offers a clean, understated look that resists corrosion behind the wheel face.

• Thickness: 5mm
• Bolt Pattern: 5/112
• Center Bore: 66.5mm
• Thread Type: 14x1.5
• Series: DR (Requires extended length wheel bolts, sold separately)
• Material: Proprietary high-tensile strength alloy
• Finish: Black Anodized
• Country of Origin: Germany
• Manufacturer Part Number: 1055665SW

Fits select 1972-2020 Audi, Chrysler, Mercedes-Benz, and Porsche models. Optimize your vehicle's stance and improve lateral stability with H&R Trak+ DR Series wheel spacers. These 5mm spacers move the wheel outward to sit flush with the fender, correcting offset and providing a wider track for better handling.

H&R Trak+ spacers are manufactured in Germany from a proprietary aluminum/magnesium alloy that offers higher tensile strength than standard 6061-T6 billet. Precision CNC-machined for a hubcentric fit, they feature a full-contact hub design to ensure even load distribution and eliminate vibration. As part of the DR Series, these spacers fit between the wheel and hub and require longer wheel bolts (sold separately) for a secure installation.

• Series: Trak+ DR
• Thickness: 5mm
• Bolt Pattern: 5/112
• Center Bore: 66.5mm
• Bolt Thread: 14x1.5
• Material: High-strength proprietary light alloy
• Finish: Hard-anodized for durability
• MPN: 1055665
• Origin: Made in Germany

Fits select 1990-2020 Audi, Volkswagen, and Bentley models (2.0T).

H&R Trak+ DR Series Wheel Spacers move your wheels out to be flush with the fender, instantly providing a more aggressive stance and improved lateral stability. Unlike standard 6061-T6 billet aluminum spacers, these are manufactured from a proprietary aluminum/magnesium alloy with a significantly higher tensile strength. The hubcentric design features a full-contact hub to ensure even load distribution and precise fitment, mirroring the factory hub for vibration-free performance.

The DR Series 5mm spacers fit between the wheel and hub. These require the use of longer wheel bolts (sold separately) to ensure proper thread engagement. All H&R Trak+ spacers are 100% made in Germany and meet ISO 9001 quality assurance standards.

• Thickness: 5mm
• Bolt Pattern: 5/112
• Center Bore: 57.1mm
• Thread Type: 14x1.5
• Finish: Black
• Material: Proprietary High-Tensile Light Alloy
• Series: DR
• MPN: 1055571SW

Fits select 1984-2015 Audi and Volkswagen models including A3, A4, A6, S4, Golf, GTI, Jetta, and Passat (2.0T / 1.8T).

The H&R Trak+ DR Series Wheel Adaptors solve center bore compatibility issues by allowing wheels with a 66.5mm center bore to be mounted on vehicles with a 57.1mm hub. These hubcentric spacers effectively move the wheel outward by 5mm, widening the vehicle's track for improved stability and a more aggressive, flush stance against the fender. Unlike generic spacers, these are engineered with a hub-centric design to ensure a perfect fit and eliminate vibration at high speeds.

• Manufactured from a proprietary aluminum/magnesium alloy for high tensile strength and reduced unsprung weight.
• Precision CNC machined for an exact fit and surface finish.
• Hard anodized for increased surface durability and corrosion resistance.
• Adapts 57.1mm vehicle hub to 66.5mm wheel center bore.
• Thickness: 5mm (10mm per axle total track widening).
• Made in Germany.
• Manufacturer Part Number: 1055571665.