The Wheel Mate Muteki SR35 Series Lug Nut and Lock Set provides a secure, low-profile fastener solution for aftermarket wheels. Manufactured from cold-forged 50BV30 chrome vanadium steel, these lug nuts offer exceptional strength-to-weight performance. The closed-end design is critical for street driven vehicles, as it seals the wheel studs from moisture and road debris to prevent thread corrosion and seizing.

• Thread Pitch: 12x1.50mm
• Total Length: 35mm
• Diameter: 22mm slim design for small lug holes
• Seat Style: 60-degree oversized taper (conical) for maximum contact
• Material: Cold-forged 50BV30 Chrome Vanadium steel
• Finish: Corrosion-resistant Black
• Kit Includes: 16 lug nuts, 4 matching wheel locks, and 1 dual-hex key adapter (17mm/19mm)
• Manufacturer Part Number: 32926BP

The SR35 series is designed for use with aftermarket wheels featuring a 60-degree conical seat. The included key adapter ensures a precise fit during installation and removal, reducing the risk of marring the wheel finish. Please verify your vehicle's thread pitch and wheel seat type before installation.

Secure your aftermarket wheels with the Wheel Mate Muteki SR35 series, designed for enthusiasts who demand high strength and a low-profile aesthetic. These closed-end lug nuts are engineered to protect your wheel studs from road grime and corrosion while providing a clean, finished look. The 35mm length is ideal for wheels with deeper lug pockets where a standard nut might be difficult to reach or appear recessed.

Constructed from cold-milled 50BV30 chrome vanadium steel, these lugs offer superior durability and torque retention compared to standard hardware. The oversized 60-degree taper ensures maximum contact between the lug nut and the wheel seat for a more stable mounting surface. This kit includes a full set of lug nuts plus a matching lock set for added security.

• Series: Muteki SR35
• Thread Pitch: M12 x 1.25
• Length: 35mm
• Configuration: Closed End
• Material: 50BV30 Chrome Vanadium Steel
• Finish: Black
• Security: Includes Lock Set and Key
• Manufacturer Part Number: 32925BP

Secure your wheels with the performance-oriented Wheel Mate Muteki Open End Lug Nuts. These lug nuts are specifically engineered with an open-ended design to accommodate extended wheel studs, making them a primary choice for racing applications or enthusiasts using wheel spacers. The 12x1.50 thread pitch offers a precise fit for a broad range of passenger vehicles.

Built for durability and repeated use, these Muteki lug nuts are manufactured from high-strength cold-forged steel. This construction provides superior thread engagement and resistance to stripping compared to softer alternatives. The classic chrome finish offers a clean look while providing a layer of protection against corrosion and road grime.

• Thread Pitch: 12x1.50mm
• Design: Open End (Compatible with extended studs)
• Material: Cold-forged steel for maximum strength
• Finish: Chrome
• Manufacturer Part Number: 31886C

Secure your aftermarket wheels with the Project Kics R40 Iconix Black Lug Nut Lock Set. Engineered for both security and wheel protection, these locks feature the signature R40 two-piece construction. The integrated rotating taper seat allows for precise torquing without marring or galling the lug seat of your wheels, making them an essential upgrade for maintaining high-end finishes.

• Thread Pitch: 12x1.50
• Series: R40 Iconix
• Finish: Black
• Quantity: 4 Locking Lug Nuts and 1 Key
• Two-piece floating seat design prevents wheel damage during installation
• Manufacturer Part Number: WYIF41KK

Fits select 2023-2026 Honda Civic (LX, Sport, Si, Type R) and 2024-2026 Acura Integra (Base, A-Spec, Type S) models.

H&R Trak+ DRM Series Wheel Spacers widen your vehicle's track by 30mm, moving the wheels flush with the fenders for an aggressive stance and increased lateral stability. These spacers are engineered from a proprietary aluminum/magnesium alloy that delivers a higher tensile strength than standard 6061-T6 billet aluminum. The hubcentric design features a full-contact hub interface, ensuring even load force distribution and vibration-free performance by maintaining the factory-centric mounting.

The DRM Series is designed for straightforward installation, bolting directly to the vehicle's factory hub using the included hardware. The spacer features its own integrated wheel studs, allowing you to mount your wheels without the need for longer replacement studs. This makes it an ideal solution for achieving a wider track width while maintaining structural integrity.

• Thickness: 30mm
• Bolt Pattern: 5/120
• Center Bore: 64.1mm
• Thread Pitch: M14x1.5
• Material: High-tensile proprietary alloy
• Design: Hubcentric DRM Series
• Manufacturer Part Number: 6075644SW

Fits select 2007-2023 Hyundai, Jeep, Kia, and Mazda models, including Santa Fe, Compass, Stinger, and CX-5.

H&R Trak+ DRM Series Wheel Adaptors widen your vehicle's track for improved lateral stability and a flush, aggressive stance. These 30mm adaptors are hubcentric, featuring a full-contact hub design that acts as an extension of the factory hub. This ensures even load distribution and eliminates the vibrations often associated with generic, non-hubcentric spacers.

The DRM Series is designed for ease of installation; the adaptor bolts to the existing hub using the included hardware, while your wheel is then secured to the adaptor's integrated studs. Manufactured from a proprietary lightweight aluminum/magnesium alloy, these adaptors offer higher tensile strength than standard 6061-T6 billet aluminum.

• Thickness: 30mm
• Bolt Pattern: 5/114.3
• Center Bore: 67.1mm
• Thread Type: 12x1.5
• Finish: Black Anodized
• Series: Trak+ DRM
• Manufacturer Part Number: 6065673SW

Fits 2024-2025 Toyota Land Cruiser (1958, Base, and First Edition) models.

H&R Trak+ DRM Series Wheel Adaptors widen your vehicle's track to improve lateral stability and provide a flush, aggressive stance. The DRM series is designed to bolt directly to the factory hub using the existing studs and the included H&R nuts; the wheel is then secured to the adaptor's integrated wheel studs. This design is ideal for applications where the desired spacing is significant enough to require dedicated studs.

These adaptors are precision-engineered from a proprietary aluminum/magnesium alloy that delivers higher tensile strength than standard 6061-T6 billet aluminum. Being fully hubcentric with a 95mm center bore, they maintain a full-contact hub face for even load distribution and vibration-free performance.

• Thickness: 30mm
• Bolt Pattern: 6/139.7
• Center Bore: 95mm
• Thread Pitch: 14x1.5
• Series: Trak+ DRM
• Material: High-tensile proprietary light alloy
• Manufacturer Part Number: 60106950

Fits 2023-2026 Honda Civic (all trims including Type R, Si, and Hybrid) and 2024-2026 Acura Integra (including Type S and A-Spec).

H&R Trak+™ DRM Series wheel adaptors are engineered to widen the vehicle track, moving the wheels out to be flush with the fender for improved handling and a more aggressive stance. These adaptors bolt directly to the factory hub using the included hardware, providing new integrated studs for the wheel to mount to. Unlike generic spacers, these are hubcentric with a full-contact hub design, ensuring even load distribution and lateral support similar to the original equipment setup.

Constructed from a proprietary aluminum/magnesium alloy specifically developed for H&R, these adaptors offer higher tensile strength than standard 6061-T6 billet aluminum. This provides a lightweight yet durable solution for enthusiasts looking to optimize wheel fitment without compromising safety or performance.

• Manufacturer Part Number: 5075644
• Thickness: 25mm
• Bolt Pattern: 5/120
• Center Bore: 64.1mm
• Thread Type: 14x1.5
• Series: Trak+ DRM
• Material: High-strength proprietary alloy
• Design: Hubcentric with full contact hub

Fits 2024-2025 Toyota Land Cruiser 1958, Base, and First Edition models.

H&R Trak+ DRM Series Wheel Spacers are engineered to widen your vehicle's track, improving both handling stability and aesthetic stance by bringing the wheels flush with the fenders. Unlike thinner shim-style spacers, the DRM series bolts directly to the factory hub using the included hardware, while the wheel attaches to the spacer's integrated 14x1.5 threaded studs. This design provides a secure installation without the need to replace factory wheel studs.

Constructed from a proprietary lightweight aluminum/magnesium alloy, these spacers offer significantly higher tensile strength than standard 6061-T6 billet aluminum. Every Trak+ spacer is hubcentric, featuring a full-contact hub design that mirrors the factory geometry to ensure even load distribution and a vibration-free ride.

• Thickness: 25mm
• Bolt Pattern: 6/139.7
• Center Bore: 95mm
• Thread Pitch: 14x1.5
• Series: Trak+ DRM
• Material: Proprietary High-Tensile Alloy
• Manufacturer Part Number: 50106950

Fits 2024-2025 Toyota Land Cruiser 1958, Base, and First Edition models.

H&R Trak+ DRM Series wheel adaptors are engineered to widen your vehicle's track, pushing the wheels out to sit flush with the fenders for a corrected stance and improved lateral stability. Unlike generic spacers, these are hubcentric and feature a full-contact hub design that mirrors the factory hub for precise load distribution and vibration-free operation.

Each adaptor is manufactured from a proprietary aluminum/magnesium alloy that provides higher tensile strength than standard 6061-T6 billet aluminum. The DRM Series simplifies installation by including integrated wheel studs; the adaptor bolts directly to the factory hub using the supplied hardware, and your wheel then bolts to the new adaptor studs.

• Thickness: 23mm
• Bolt Pattern: 6/139.7
• Center Bore: 95mm
• Thread Pitch: 14x1.5
• Series: Trak+ DRM
• Material: Proprietary High-Tensile Aluminum/Magnesium Alloy
• Manufacturer Part Number: 46106950

Fits select 2010-2024 Hyundai, Kia, and Mazda models including Tucson, Stinger, Sorento, Soul, Mazda 3, Mazda 6, and CX-5.

H&R Trak+ Wheel Spacers move your wheels out to be flush with the fender, instantly providing a more aggressive stance and improved lateral stability. The DRM Series 22mm adaptors bolt directly to the factory hub using the included hardware, while your wheel attaches to the adaptor's integrated wheel studs for a secure, hubcentric fit.

H&R manufactures these adaptors from a proprietary aluminum/magnesium alloy designed for higher tensile strength than standard 6061-T6 billet. The hubcentric design features a full-contact hub to ensure even load distribution and prevent vibration, mirroring the factory mounting surface for maximum safety and performance.

• Part Number: 4465673SW
• Thickness: 22mm
• Bolt Pattern: 5/114.3
• Center Bore: 67.1mm
• Thread Type: 12x1.5
• Series: DRM
• Finish: Black Anodized
• Material: High-tensile proprietary light alloy

Fits select 2007-2026 Hyundai, Jeep, Kia, and Mazda models (including Ioniq 5, EV6, CX-5, and Stinger) with a 5x114.3 bolt pattern and 67.1mm center bore.

H&R Trak+ DRM Series Wheel Spacers widen your vehicle's track, pushing the wheels out to sit flush with the fender for an improved stance and increased lateral stability. These DRM adaptors bolt directly to the factory hub using existing studs, featuring their own integrated wheel studs to maintain a secure mounting surface for your wheels.

Engineered for precision, these hubcentric adaptors are manufactured from a proprietary aluminum/magnesium alloy that delivers a higher tensile strength than standard 6061-T6 billet aluminum. The full-contact hub design ensures even load force distribution and vibration-free performance. The black finish provides a durable, corrosion-resistant appearance that blends in behind the wheel spokes.

• Series: Trak+ DRM
• Thickness: 20mm
• Bolt Pattern: 5/114.3
• Center Bore: 67.1mm
• Thread Pitch: 12x1.5
• Color: Black
• Material: Proprietary high-tensile light alloy
• Design: Hubcentric with integrated studs
• Manufacturer Part Number: 4065673SW

Fits select 1986-2008 Acura Integra and Honda Accord, Civic, Civic del Sol, CRX, Fit, and Prelude models. These H&R Trak+ DRS Series wheel spacers widen your vehicle's track by 20mm, pushing the wheels out to be flush with the fender for a more aggressive stance and improved lateral stability.

The DRS Series is designed for vehicles where the spacer is secured by replacing the factory wheel studs with longer, high-strength H&R studs (included). Unlike generic spacers, H&R Trak+ components are hubcentric, featuring a full-contact hub that matches the factory geometry to ensure even load distribution and vibration-free performance. Each spacer is CNC-machined from a proprietary aluminum/magnesium alloy that offers higher tensile strength than standard 6061-T6 billet aluminum.

• Width: 20mm
• Bolt Pattern: 4/100
• Center Bore: 56.1mm
• Thread Type: 12x1.5
• Series: DRS Series (includes extended studs)
• Material: Proprietary high-tensile strength light alloy
• Finish: Hard anodized for durability and corrosion resistance
• Manufacturing: Made in Germany
• Part Number: 40245616

Fits 2023-2025 BMW XM Base and Label models.

H&R Trak+ Wheel Spacers widen your vehicle's track to push the wheels out until they are flush with the fender, providing an aggressive stance and improved lateral stability. These DR Series spacers are engineered for enthusiasts looking to enhance both the aesthetics and handling of the G09-chassis BMW XM.

Constructed from a proprietary aluminum/magnesium alloy specifically developed for H&R, these spacers offer a higher tensile strength than standard 6061-T6 billet aluminum. The hubcentric design features a full-contact hub to ensure even load distribution and precise fitment, mirroring the factory hub configuration for maximum safety and vibration-free performance.

• Thickness: 18mm
• Bolt Pattern: 5/120
• Center Bore: 66.5mm
• Thread Pitch: 14x1.25
• Finish: Black Anodized
• Spacer Type: DR Series
• Manufacturer Part Number: 3675664SW

Fits select 2009-2020 Hyundai, Kia, and Mazda models including Genesis, Veloster, Tucson, Forte, Optima, Soul, Sportage, and CX-5 (2.0T / 1.6T).

H&R Trak+ DRM Series wheel spacers widen your vehicle's track for a flush fender-to-wheel fitment, instantly improving both stance and lateral stability. Unlike generic spacers, these are manufactured from a proprietary aluminum/magnesium alloy that delivers a higher tensile strength than standard 6061-T6 billet aluminum. The hubcentric design features a full-contact hub to ensure even load distribution and eliminate vibration by maintaining factory-level support.

The DRM Series includes integrated 12x1.5 threaded studs, allowing the spacer to bolt directly to the existing hub while providing a new mounting surface for your wheels. This design is ideal for achieving a wider profile without the need for replacing factory wheel studs in many applications.

• Thickness: 18mm
• Bolt Pattern: 5/114.3
• Center Bore: 67.1mm
• Thread Pitch: 12x1.5
• Material: High-strength proprietary lightweight alloy
• Manufacturing: 100% Made in Germany
• Part Number: 3665673

Fits 2022-2026 Hyundai Ioniq 5 and 2022-2025 Kia EV6 models.

H&R TRAK+ DRM Series Wheel Spacers widen your vehicle's track to bring wheels flush with the fenders, instantly improving lateral stability and providing a more aggressive stance. The DRM Series 15mm spacers bolt directly to the factory hub using the included hardware and feature integrated studs, making them an ideal solution for increasing track width without replacing original wheel studs.

These spacers are manufactured from a proprietary aluminum/magnesium alloy that delivers higher tensile strength than standard 6061-T6 billet aluminum. Every H&R spacer is precision-engineered to be hubcentric, featuring a full-contact hub design that ensures even load distribution and maintains the factory-level ride quality by eliminating vibration.

• Thickness: 15mm
• Bolt Pattern: 5/114.3
• Center Bore: 67.1mm
• Thread Pitch: M12 x 1.5
• Finish: Black Anodized
• Material: Proprietary High-Strength Alloy
• Series: TRAK+ DRM
• Manufacturer Part Number: 30656730SW

Fits 2022-2026 Hyundai Ioniq 5 and 2022-2025 Kia EV6 models across all trims including GT, GT-Line, and Limited.

H&R Trak+ DRM Series Wheel Spacers are engineered to widen your vehicle's track, pushing the wheels out to sit flush with the fenders for a corrected stance and improved lateral stability. Unlike universal spacers, these are hubcentric and feature a full-contact hub design that matches the factory interface, ensuring even load distribution and eliminating the vibrations common with lesser-quality components.

Constructed from a proprietary aluminum/magnesium alloy, these spacers offer higher tensile strength than standard 6061-T6 billet aluminum. The DRM Series 30656730 design simplifies installation; the spacer bolts directly to your existing hub using the included hardware, and your wheel is then secured to the spacer's integrated studs.

• Thickness: 15mm
• Bolt Pattern: 5/114.3
• Center Bore: 67.1mm
• Thread Pitch: 12x1.5
• Material: Proprietary high-tensile strength light alloy
• Finish: Hard-anodized for durability and corrosion resistance
• Series: Trak+ DRM
• Manufacturer Part Number: 30656730

Fits select 2013-2020 Mercedes-Benz GL-Class and GLS-Class models (GL350, GL450, GL550, GL63 AMG, GLS450, GLS550, and GLS63 AMG).

H&R Trak+ DR Series Wheel Spacers are engineered to move your wheels outward, flushing them with the fender for an improved stance and increased lateral stability. These spacers are hubcentric, featuring a full-contact hub design that ensures even load distribution and prevents vibration, maintaining the factory hub's integrity.

Constructed from a proprietary lightweight alloy with a higher tensile strength than standard 6061-T6 billet aluminum, these spacers are designed for durability and performance. As a DR Series spacer, this 15mm set installs between the wheel and the hub and requires longer wheel bolts (sold separately) for a secure fitment.

• Thickness: 15mm
• Bolt Pattern: 5/112
• Center Bore: 66.5mm
• Bolt Thread: 14x1.5
• Material: Proprietary high-tensile strength alloy
• Series: Trak+ DR
• Manufacturer Part Number: 30556650
• Made in Germany

Fits 2025-2026 BMW M5 Base (Sedan) and BMW M5 Touring Base.

H&R Trak+™ DR Series Wheel Spacers improve your vehicle's stance and handling by widening the track width, pushing the wheels out to be flush with the fender. These hubcentric spacers feature a full-contact hub design, mirroring the factory hub to ensure even load force distribution and lateral support while eliminating vibration. This 13mm kit is specifically engineered for the G90-chassis M5 to provide a precise fit and a more aggressive profile.

Constructed from a proprietary aluminum/magnesium alloy, these spacers offer higher tensile strength than standard 6061-T6 billet aluminum. The black finish provides a clean, integrated look that resists corrosion and matches performance wheels.

• Series: Trak+ DR Series
• Spacer Thickness: 13mm
• Bolt Pattern: 5/132
• Center Bore: 66.5mm
• Thread Pitch: 14x1.5
• Finish: Black
• Material: High-tensile proprietary alloy
• Manufacturer Part Number: 265455664SW

Fits 2022-2025 Subaru BRZ and Toyota GR86 (all trims including Limited, Premium, TS, and Special Editions).

H&R Trak+ Wheel Spacers widen your vehicle's track for improved handling, increased lateral stability, and a flush, aggressive stance. The DRS Series spacers are designed to fit between the wheel and the hub, utilizing the included longer wheel studs to ensure proper thread engagement and safety. Manufactured from a proprietary alloy with a higher tensile strength than standard 6061-T6 billet aluminum, these spacers are both lightweight and exceptionally durable.

To maintain factory-level ride quality, these spacers are precision-engineered to be hubcentric. The design features a full-contact hub face that mirrors the OEM hub, providing even load distribution and critical lateral support during spirited driving.

• Thickness: 12mm
• Bolt Pattern: 5/100
• Center Bore: 56mm
• Thread Pitch: 12x1.25
• Series: Trak+ DRS
• Material: High-tensile proprietary aluminum/magnesium alloy
• MPN: 2425561

Complete your wheel setup with the Gram Lights WR Series Center Cap. This authentic replacement cap provides a clean, finished aesthetic while protecting your wheel hub from road debris and corrosion. Featuring a striking Red/Silver color scheme, it is engineered for a precise press-fit into the center bore of select Gram Lights models.

• Compatible Models: Fits Gram Lights 57CR, 57DR, 57D, and 57S-PRO wheels
• Finish: Red and Silver
• Installation: Direct snap-in fitment
• Manufacturer Part Number: WCGLRDSL

Whether you are replacing a lost cap or refreshing the look of your 57-series wheels, this genuine Gram Lights accessory ensures the high-quality fit and finish expected from RAYS engineering.

Complete your wheel setup with the Gram Lights GL Center Cap (WCGLBKBK). These optional center caps are specifically engineered to fit the Gram Lights 57CR and 57DR wheel series, providing a clean, finished look that protects the hub assembly from dirt and road debris. Featuring a stealthy black-on-black colorway, this cap is the perfect finishing touch for enthusiasts who prefer a subtle, color-matched aesthetic.

• Genuine Gram Lights accessory from RAYS
• Compatible Series: 57CR and 57DR wheels
• Finish: Black logo on a black background
• Durable construction to withstand heat and road conditions
• Manufacturer Part Number: WCGLBKBK
• Sold individually

Complete your wheel setup with the Advan Racing 73mm Full Flat Center Cap in Umber Bronze. Specifically designed for Advan wheels with a 73mm center bore, this cap offers a clean, low-profile look that sits flush with the wheel face. The full flat design is the ideal choice for drivers seeking a minimalist, track-focused aesthetic without a protruding center piece.

• Manufacturer Part Number: V3219
• Bore Diameter: 73mm
• Profile: Full Flat
• Finish: Umber Bronze
• Installation: Direct fit for Advan wheels with a 73mm center hub

This genuine Advan Racing component (MPN: V3219) ensures a secure fit and an exact color match for Umber Bronze wheels. Sold individually.

Secure your wheel assembly with Wheel Mate Muteki Open End Lug Nuts. Specifically engineered for performance applications, these nuts feature an open-ended design that accommodates extended wheel studs—a critical requirement for many track-oriented setups and vehicles running wheel spacers. The compact, small-diameter design ensures compatibility with aftermarket wheels that have narrow lug holes.

Constructed from cold-forged steel, these Muteki lug nuts offer superior strength and reliable torque retention without the bulk of traditional hardware. The chrome finish provides a clean, classic aesthetic while offering protection against the elements.

• Thread Pitch: M12 x 1.25
• Style: Open End
• Material: Cold-forged steel
• Finish: Chrome
• Manufacturer Part Number: 31885C

Restore the clean look of your wheel assembly with this genuine Method Race Wheels 2168 series replacement center cap. Designed specifically for wheels requiring a 130mm bore fitment, this cap features a durable black finish to match your existing setup and protect the hub assembly from road debris. The screw-on mounting style provides a more secure, vibration-resistant installation compared to standard snap-in caps, making it ideal for both street and off-road applications.

• Direct replacement for Method 2168 series center caps
• Threaded screw-on design ensures a flush and secure fit
• High-impact construction with a corrosion-resistant black finish
• Maintains the clean, professional aesthetic of Method Race Wheels

• Part Number: CP-2168L179
• Model Series: 2168
• Diameter: 130mm
• Finish: Black
• Attachment Type: Screw-On

Complete your wheel assembly with these genuine Rays Valve Stem Caps. Precision-machined for a perfect fit on any standard Schrader valve, these caps replace basic plastic covers with a durable, anodized aluminum alternative that withstands the elements without fading or seizing. Designed by Rays Engineering, the specialists behind Volk Racing and Gram Lights, these gunmetal caps provide a subtle, high-end finish that complements both aftermarket and factory wheels.

• Manufactured from high-grade aluminum for lightweight durability
• Anodized gunmetal finish for superior corrosion resistance
• Universal fitment for all standard Schrader tire valve stems
• Distinctive Rays branding for an authentic JDM aesthetic
• Set includes four (4) valve stem caps
• Manufacturer Part Number: WVALGM2

Secure your wheels with the Rays M12x1.25 Black Lug Nut Set, a complete hardware solution designed for 5-lug vehicle applications. This 20-piece kit combines standard fastening with integrated theft deterrence, ensuring your wheels remain properly torqued and protected. Each component is finished in a durable black coating to resist corrosion and maintain a clean aesthetic behind the wheel spokes.

This set includes 16 standard lug nuts and 4 locking nuts, providing a full replacement for factory hardware on 5-lug hubs. To ensure a seamless installation and service experience, the kit comes complete with a dedicated socket adapter and a specialized lock nut key, allowing for precise torque application without marring the finish.

• Thread Pitch: M12x1.25
• Finish: Black
• Set Includes: 16 standard lug nuts, 4 locking nuts
• Hardware Included: 1 hex adapter and 1 lock nut key
• Manufacturer Part Number: W1712125B

The Project Kics WA129 is a precision-engineered replacement key adapter specifically designed for the Monolith M14 series lug nuts. This tool is essential for the secure installation and removal of Monolith fasteners, which utilize a unique internal-drive pattern to provide both a clean aesthetic and enhanced theft deterrence.

• Manufacturer Part Number: WA129
• Compatibility: Fits Project Kics Monolith M14 series lug nuts exclusively
• Durable construction to withstand repeated torque applications
• Compact outer diameter designed to clear tight lug hole bores on aftermarket wheels
• Genuine Project Kics replacement component ensures exact engagement with the nut pattern

Fits select 2015-2025 Ford F-150, Expedition, Bronco Raptor, and Lincoln Navigator models.

Upgrade your factory hardware with this Ford Racing Black Chrome Lug Nut Kit. Designed specifically for late-model Ford trucks and SUVs, these M14 x 1.5 lug nuts provide a durable, premium appearance while maintaining OE-level security. The black chrome finish offers superior corrosion resistance and a sleek look for aftermarket or factory wheels. This is a complete vehicle kit containing 24 lug nuts to service all four corners on 6-lug applications.

• Manufacturer Part Number: M-1012K-F15B
• Thread Pitch: M14 x 1.5
• Finish: Black Chrome
• Quantity: Set of 24 Lug Nuts
• Direct replacement for factory Ford/Lincoln hardware

Fits select 2009-2026 BMW 2, 3, 4, 5, 6, 7, and 8 Series, as well as X1, X2, X3, X4, X5, and M models.

This Dinan extended lug bolt kit provides the necessary thread engagement when installing 15mm or 17mm wheel spacers. Designed with an OEM-style cone seat for a precise interface with your wheels, these bolts ensure secure fastening and consistent torque retention. Each bolt is crafted from high-strength steel and finished with a black zinc coating for superior corrosion resistance and a clean aesthetic that complements aftermarket and black OEM wheels.

• Thread: M14
• Length: 45mm
• Quantity: Set of 10 bolts
• Seat Type: OEM-style Cone Seat
• Material: High-strength steel construction
• Finish: Black zinc coating
• Application: Specifically for use with 15mm and 17mm spacers
• Manufacturer Part Number: D220-0006