H&R Wheel Bolts provide a precision-engineered solution for securing your wheels, whether you are replacing worn factory hardware or installing wheel spacers that require extended shank lengths. These specialty fasteners are designed to meet the rigorous demands of performance driving and are manufactured in Germany to ensure the highest material quality and thread tolerances.

This specific bolt features a 17mm ball seat, the standard configuration for many Volkswagen and Audi factory wheels. The extended 37mm length is critical when adding spacers to maintain proper thread engagement. Finished in black, these bolts offer a clean, integrated look for aftermarket or OE wheels while providing the tensile strength necessary for safe operation.

• Thread Pitch: M14 x 1.5
• Shank Length: 37mm
• Seat Type: Ball Head (17mm Hex)
• Color/Finish: Black
• Material: High-tensile strength steel
• Application: Replaces OE hardware or supports wheel spacer installations
• Manufactured in Germany
• Manufacturer Part Number: 1453703SW

Maintain proper thread engagement and wheel security with this H&R wheel bolt. Designed for select Audi and Volkswagen vehicles, these bolts feature the 14x1.5 thread pitch and ball seat design required for factory wheels and many aftermarket wheels designed for VAG-group hubs. At 37mm in length, these are frequently used as extended bolts for wheel spacers or as high-quality, corrosion-resistant replacements for worn OE hardware.

• Thread Pitch: 14 x 1.5
• Shank Length: 37mm
• Seat Type: Ball Seat
• Wrench/Hex Size: 17mm
• Manufacturing: Precision machined and Made in Germany
• Manufacturer Part Number: 1453703

Always verify the required seat type (ball vs. conical) and the necessary shank length for your specific wheel and spacer combination before installation.

H&R wheel bolts are engineered for precision and safety, whether you are replacing worn factory hardware or installing wheel spacers that require extended shank lengths for proper thread engagement. These 14x1.5mm bolts feature the specific ball seat profile required for most OEM Volkswagen and Audi wheel applications.

Manufactured in Germany to exacting tolerances, these high-strength fasteners ensure consistent torque retention and structural integrity under load. The durable black finish provides a clean, understated look while offering essential corrosion resistance for the fastener's lifespan.

• Thread Pitch: 14x1.5mm
• Shank Length: 35mm
• Seat Type: Ball Seat (Type VW/Audi)
• Drive Size: 17mm Hex
• Finish: Black
• Origin: Made in Germany
• Manufacturer Part Number: 1453503SW

Ensure a secure fit and professional finish with this H&R M14 x 1.5 wheel bolt (MPN 1453502SW). Specifically designed with a Mercedes-style ball seat and a 35mm shank length, these bolts are ideal for use with wheel spacers or as high-strength replacements for factory hardware when extra length is required.

Manufactured in Germany, H&R wheel hardware is engineered to exacting tolerances using high-tensile strength alloys to meet or exceed factory safety standards. The durable black finish provides an understated look while offering excellent corrosion resistance for long-term durability on the street or track.

• Thread Size: M14 x 1.5
• Shank Length: 35mm
• Seat Type: Ball Seat (Mercedes R14 style)
• Drive Size: 17mm Hex
• Finish: Black
• Country of Origin: Germany
• Manufacturer Part Number: 1453502SW

H&R specialty wheel bolts are engineered for precision fitment and maximum safety, whether used as direct OE replacements or to accommodate wheel spacers. This wheel bolt (MPN 1453502) features the specific ball seat profile required for Mercedes-Benz factory wheels and select aftermarket applications.

• Thread Pitch: M14 x 1.5
• Shank Length: 35mm
• Seat Type: Mercedes Ball Seat
• Wrench/Hex Size: 17mm
• Application: Extended lengths for use with wheel spacers or as OE replacements
• Manufacturing: Made in Germany from high-strength materials
• MPN: 1453502

Ensuring correct thread engagement and seat profile is critical for wheel torque retention and safety. These H&R bolts provide a reliable fastening solution for both performance driving and standard maintenance.

H&R specialty wheel bolts are precision-engineered in Germany to provide high-quality fastening for both OE replacement and aftermarket wheel applications. This M14x1.5 bolt is specifically designed with an extended 35mm shank, making it an ideal choice for use with wheel spacers or for securing wheels that require longer thread engagement than factory hardware.

• Manufacturer Part Number: 1453501SW
• Thread Pitch: M14 x 1.5
• Shank Length: 35mm
• Seat Type: Tapered (Conical)
• Wrench/Hex Size: 17mm
• Finish: Black
• Manufacturing Origin: Germany

Each bolt is manufactured from high-strength materials to ensure durability under significant torque loads. The tapered head design ensures a proper centered fit within the wheel lug bore, while the corrosion-resistant black finish provides a discreet, clean aesthetic for dark-colored or performance wheels.

H&R specialty wheel bolts offer a high-strength fastening solution for performance wheel applications or as premium OE replacements. Engineered and manufactured in Germany, these bolts are designed to meet or exceed factory specifications for materials and tolerances. With a 35mm shank length, these extended bolts are frequently used to provide the necessary thread engagement when installing wheel spacers.

• Thread Pitch: M14 x 1.5
• Shank Length: 35mm
• Seat Design: Tapered (Conical)
• Wrench/Hex Size: 17mm
• Manufacturing: Made in Germany
• Part Number: 1453501

Always verify the required seat type (tapered vs. ball seat) and shank length for your specific wheels and spacer combination before installation.

H&R specialty wheel bolts are engineered for precision and durability, whether you are replacing worn factory hardware or upgrading to accommodate wheel spacers. These M14x1.5 bolts are manufactured in Germany to exacting standards, ensuring proper thread engagement and torque retention for high-performance automotive applications.

This specific bolt features a 30mm shank length and a tapered (conical) seat, which is required for many aftermarket wheel styles that do not utilize standard OE ball seats. The 17mm hex head ensures compatibility with common lug wrenches, while the black finish provides a clean, understated look that resists corrosion and environmental wear.

• Thread Pitch: M14 x 1.5
• Shank Length: 30mm
• Seat Type: Tapered (Conical)
• Head Size: 17mm Hex
• Finish: Black
• Manufacturer Part Number: 1453001SW
• Country of Origin: Germany

Secure your wheels with precision-engineered H&R wheel bolts, designed for use as high-quality OE replacements or to accommodate increased spacing requirements. Manufactured in Germany, these fasteners are crafted to meet rigorous performance standards, ensuring reliable wheel retention for street and track applications.

• Thread Size: M14 x 1.5
• Shank Length: 30mm
• Seat Type: Tapered (Conical)
• Head Size: 17mm Hex
• Extended length suitable for use with wheel spacers or as a heavy-duty OE replacement
• High-tensile strength construction for maximum safety and durability
• Made in Germany
• Manufacturer Part Number: 1453001

H&R specialty wheel bolts (MPN 1452801) provide a high-quality fastening solution for both standard OE replacements and applications requiring extended lengths for wheel spacer installations. Manufactured in Germany to exacting standards, these bolts ensure proper thread engagement and a secure seat fitment for your vehicle's wheel assembly.

• Thread Pitch: 14 x 1.5
• Shank Length: 28mm
• Seat Type: Tapered (Cone Seat)
• Head Size: 17mm Hex
• Origin: Made in Germany
• Part Number: 1452801

These fasteners are engineered for durability and precision, providing the necessary strength for critical wheel-to-hub mounting. Whether you are refreshing worn factory hardware or fine-tuning your wheel fitment with spacers, H&R hardware delivers the reliability required for high-performance use.

H&R specialty wheel bolts are precision-engineered fastening solutions designed for both OE replacement and aftermarket wheel installations. These bolts are frequently utilized when installing wheel spacers or upgrading to wheels that require specific seat types or extended shank lengths to ensure proper thread engagement.

• Thread Size: M14 x 1.5
• Shank Length: 25mm
• Seat Type: Tapered (Conical)
• Head Size: 17mm Hex
• Manufactured in Germany to exacting tolerances
• Compatible with H&R wheel spacers and various wheel applications
• Manufacturer Part Number: 1452501

H&R specialty wheel bolts are engineered for precision and safety, serving as high-quality replacements or extended hardware for use with wheel spacers. These M14 x 1.25 fasteners feature a tapered (conical) seat and are manufactured in Germany to exacting standards. The 50mm shank length is designed for applications requiring additional thread engagement beyond standard factory specifications.

• Thread Pitch: M14 x 1.25
• Shank Length: 50mm
• Seat Type: Tapered (Conical)
• Head Size: 17mm Hex
• Finish: Black
• Material: High-tensile strength steel
• Origin: Made in Germany
• Manufacturer Part Number: 14255001SW

Always verify the required seat type (tapered vs. ball seat) for your specific wheels and ensure proper thread engagement before torqueing to factory specifications.

Secure your wheels with precision-engineered H&R Wheel Bolts, manufactured in Germany to strict quality standards. These bolts are designed as high-grade replacements for original equipment or as extended hardware for use with wheel spacers. Featuring a 14x1.25 thread pitch and a tapered seat (conical) design, these bolts ensure proper torque retention and wheel centering for high-performance applications.

• Thread Pitch: 14 x 1.25
• Shank Length: 43mm
• Seat Type: Tapered Head
• Hex Head Size: 17mm
• Finish: Black
• Construction: High-strength steel
• Origin: Made in Germany
• Manufacturer Part Number: 14254301SW

H&R specialty wheel bolts provide a secure and precise fastening solution for vehicles requiring M14 x 1.25 hardware. These high-quality bolts are engineered in Germany to exacting standards, making them suitable as heavy-duty OE replacements or as extended-length hardware when installing wheel spacers.

The tapered (conical) seat design ensures proper centering and torque distribution against the wheel's lug pocket. Finished in a durable black coating, these bolts offer a clean aesthetic for aftermarket or factory wheels while resisting corrosion and wear.

• Thread Pitch: M14 x 1.25
• Shank Length: 40mm
• Seat Type: Tapered (Conical)
• Head Size: 17mm Hex
• Finish: Black
• Manufacturing: Made in Germany
• Manufacturer Part Number: 14254001SW

H&R wheel bolts offer a precision-engineered fastening solution whether you are replacing worn OE hardware or installing wheel spacers that require extended shank lengths. These bolts are manufactured in Germany to exacting standards to ensure consistent torque retention and structural integrity under demanding driving conditions.

• Thread Pitch: M14 x 1.25
• Shank Length: 35mm
• Seat Type: Tapered (Cone Seat)
• Hex Head Size: 17mm
• Finish: Black
• Material: High-strength steel
• Manufacturer Part Number: 14253501SW
• Made in Germany

Each bolt is designed to provide maximum contact area for the seat type specified, ensuring a secure interface between the wheel and the hub assembly.

H&R specialty wheel bolts are engineered for precision and durability, serving as high-quality replacements for factory hardware or as extended fasteners for use with wheel spacers. Manufactured in Germany, these bolts ensure secure wheel-to-hub mating for street and performance applications.

This specific H&R wheel bolt (MPN: 14253101SW) features an M14 x 1.25 thread pitch and a 31mm shank length. The 60-degree tapered (cone) seat is designed to match aftermarket wheel bores or specific OE configurations requiring a tapered interface. The durable black finish provides a clean look that resists corrosion and matches dark-finish wheels.

• Thread Size: M14 x 1.25
• Shank Length: 31mm
• Seat Type: Tapered / Cone (60-degree)
• Head Size: 17mm Hex
• Finish: Black
• Material: High-strength steel
• Manufacturing: Made in Germany
• Manufacturer Part Number: 14253101SW

H&R specialty wheel bolts (MPN: 12755001) offer a precision-engineered fastening solution for vehicles requiring an M12 x 1.75 thread pitch. These bolts are manufactured in Germany to exacting standards, making them suitable as high-strength OE replacements or for applications requiring extended lengths, such as when installing wheel spacers. The 50mm effective length ensures sufficient thread engagement for safe operation when factory-length bolts are no longer adequate.

• Thread Size: M12 x 1.75
• Shank Length: 50mm
• Seat Type: Tapered (Conical)
• Head/Hex Size: 17mm
• Material: High-strength steel
• Origin: Made in Germany
• Manufacturer Part Number: 12755001

Proper wheel fastening is critical for safety; always ensure the seat type of the bolt matches the seat type of your wheel (tapered vs. ball seat) and verify the required shank length for your specific hub and spacer combination.

Secure your wheels with precision-engineered H&R specialty wheel bolts. This M12 x 1.75 fastener features a 45mm shank length, making it an ideal choice for applications requiring extended hardware, such as when installing wheel spacers, or as a high-quality replacement for OE bolts.

Manufactured in Germany to exacting tolerances, these bolts utilize a tapered (conical) seat design to ensure proper centering and clamping force on compatible wheels. The 17mm hex head allows for easy installation using standard lug wrenches or sockets.

• Thread Diameter/Pitch: M12 x 1.75
• Shank Length: 45mm
• Seat Type: Tapered (Conical)
• Head Size: 17mm Hex
• Origin: Made in Germany
• Manufacturer Part Number: 12754501

This H&R M12 x 1.5 extended wheel bolt (MPN 1256002) provides the necessary thread engagement for vehicles using wheel spacers or requiring high-strength replacement hardware. Manufactured in Germany, these bolts are engineered for precision and durability, ensuring a secure connection between your wheels and hubs.

Designed with a Mercedes-style ball head seat and a 17mm hex, this fastener is specifically suited for applications where factory-style seat geometry is required on an extended shank. The 60mm length is ideal for clearing thicker spacers while maintaining proper torque specifications and safety standards.

• Thread Size: M12 x 1.5
• Shank Length: 60mm
• Seat Type: Mercedes Ball Head
• Hex Size: 17mm
• Country of Origin: Germany
• Manufacturer Part Number: 1256002

H&R specialty wheel bolts are precision-engineered for critical fastening applications. This extended 55mm bolt (MPN 1255502) is designed for vehicles requiring additional shank length, typically when installing wheel spacers or replacing worn factory hardware. Manufactured in Germany to exacting tolerances, these bolts ensure proper thread engagement and seat contact for secure wheel fitment.

• Thread Size: 12 x 1.5mm
• Shank Length: 55mm
• Seat Type: Mercedes Ball Head
• Wrench Size: 17mm Hex
• Manufacturing: Made in Germany
• Part Number: 1255502

H&R precision-engineered wheel bolts are designed as high-quality replacements for factory hardware or as extended-length solutions for vehicles equipped with wheel spacers. Manufactured in Germany to rigorous standards, these bolts provide the strength and durability required for critical suspension components.

• Thread Pitch: M12 x 1.5
• Shank Length: 50mm
• Seat Type: Mercedes-style Ball Seat
• Wrench Size: 17mm Hex
• Construction: High-tensile strength material, Made in Germany
• Manufacturer Part Number: 1255002

Whether you are replacing worn-out OE bolts or calculating the necessary length for a wide stance, these H&R fasteners ensure proper thread engagement and a secure interface between the wheel and hub. Always verify your wheel's seat type (ball vs. cone) and required shank length before installation.

Secure your wheels with precision-engineered H&R Wheel Bolts, manufactured in Germany to the highest standards for safety and durability. This M12x1.5 bolt features a 45mm extended shank, making it an ideal solution for vehicles running wheel spacers or as a high-strength replacement for factory hardware. Designed specifically for Volkswagen and Audi applications requiring a ball seat (radius) interface, these bolts provide consistent torque retention and reliable performance.

• Thread Pitch: M12 x 1.5
• Shank Length: 45mm
• Seat Type: Ball Seat
• Hex Head Size: 17mm
• High-tensile strength construction for maximum safety
• Corrosion-resistant finish for longevity
• Made in Germany
• Manufacturer Part Number: 1254503

This H&R wheel bolt (MPN 1254502) provides the necessary extended length for vehicles utilizing wheel spacers or requiring high-strength replacement hardware. Engineered with a precision 12 x 1.5mm thread pitch and a specific Mercedes-style ball seat, this bolt ensures proper torque distribution and a secure seat between the wheel and hub assembly.

• Thread Diameter and Pitch: 12 x 1.5mm
• Shank Length: 45mm
• Seat Design: Mercedes-specific Ball Seat
• Drive Type: 17mm Hex
• Purpose: Optimized for wheel spacer applications or OE hardware replacement
• Origin: Manufactured in Germany to rigorous quality standards
• Part Number: 1254502

Precision-machined for durability and corrosion resistance, these bolts are essential for maintaining wheel safety and performance when changing offset or track width.

Secure your wheels with precision-engineered H&R wheel bolts (MPN 1254501). These high-quality fasteners are manufactured in Germany to meet rigorous standards, ensuring reliable torque retention and strength for both street and performance applications. Featuring a 45mm shank length, these bolts are ideal for use with wheel spacers or aftermarket wheel setups that require extended thread engagement over factory hardware.

Designed with a 17mm hex head for standard tool compatibility, the tapered seat ensures proper centering and even load distribution across the wheel bore. Whether you are replacing corroded OE bolts or finalizing a wider stance with spacers, H&R hardware provides the exact fitment and material integrity needed for critical drivetrain components.

• Thread Pitch: 12 x 1.5
• Shank Length: 45mm
• Seat Type: Tapered (Conical)
• Head Size: 17mm Hex
• Finish: Zinc Plated for corrosion resistance
• Country of Origin: Germany
• Manufacturer Part Number: 1254501

H&R wheel bolts are engineered for precision and durability, providing a reliable fastening solution for your vehicle's wheel assembly. Manufactured in Germany, these high-strength fasteners (MPN 1254301SW) feature a 43mm shank length, making them an ideal choice for applications using wheel spacers or as extended replacements for factory hardware to ensure proper thread engagement.

This specific bolt features a tapered (conical) seat and a 17mm hex head, finished in a durable black coating to resist corrosion and maintain a clean aesthetic. Whether you are fine-tuning wheel fitment or replacing worn fasteners, H&R components meet strict quality standards for torque retention and safety.

• Thread Pitch: 12 x 1.5
• Shank Length: 43mm
• Seat Type: Tapered (Conical)
• Head Size: 17mm Hex
• Finish: Black
• Manufacturer Part Number: 1254301SW
• Origin: Made in Germany

H&R wheel bolts provide a precision fastening solution for high-performance wheel fitment. Manufactured in Germany to rigorous standards, these bolts are suitable as high-tensile OE replacements or as extended hardware for use with wheel spacers. This specific bolt features a 12x1.5 thread pitch with a 40mm shank length, designed for applications where additional thread engagement is required over factory lengths.

• Thread Pitch: 12 x 1.5mm
• Shank Length: 40mm
• Seat Type: Mercedes Ball Seat
• Hex Size: 17mm
• Application: Replacement hardware or extended length for wheel spacers
• Origin: Made in Germany
• Manufacturer Part Number: 1254002

Always verify the required seat type (ball vs. cone) and shank length for your specific wheels and spacers before installation to ensure safe thread engagement.

H&R wheel bolts are precision-engineered fasteners designed for secure wheel fitment. These M12x1.5 bolts feature a 40mm shank length, making them an ideal choice for use with wheel spacers or as high-strength replacements for original equipment. Manufactured in Germany to exacting standards, H&R hardware ensures consistent torque and reliable thread engagement for demanding automotive applications.

• Thread Pitch: M12x1.5
• Shank Length: 40mm
• Seat Type: Tapered (Cone Seat)
• Head Size: 17mm Hex
• Finish: Black
• Manufacturing: Made in Germany
• Manufacturer Part Number: 1254001SW

Secure your wheels with precision-engineered H&R wheel bolts. These M12 x 1.5 threaded fasteners feature a 40mm shaft length, making them an ideal solution for vehicles utilizing wheel spacers or as a high-strength replacement for factory hardware. Manufactured in Germany to exacting tolerances, these bolts ensure proper torque retention and accurate wheel centering for safety and performance.

• Thread Specification: M12 x 1.5
• Shaft Length: 40mm
• Seat Type: Tapered (Conical)
• Head Size: 17mm Hex
• Application: Extended length for wheel spacers or OE replacement
• Manufacturing: Made in Germany
• Manufacturer Part Number: 1254001

H&R wheel bolts provide a high-strength solution for securing your wheels, whether you are using them as high-quality OE replacements or as extended-length hardware for wheel spacers. These fasteners are engineered and manufactured in Germany to exacting standards, ensuring proper thread engagement and torque retention.

This specific wheel bolt features a black finish for a clean, understated look and a tapered seat to match many aftermarket wheel profiles. When installing wheel spacers, ensure your bolt length is increased by the exact width of the spacer to maintain safe thread engagement.

• Thread Pitch: M12 x 1.5
• Shank Length: 38mm
• Seat Type: Tapered / Conical
• Head Size: 17mm Hex
• Finish: Black
• Manufacturing: Made in Germany
• Manufacturer Part Number: 1253801SW

These H&R specialty wheel bolts are engineered for precision and durability, serving as high-quality OE replacements or extended hardware for use with wheel spacers. Manufactured in Germany, each bolt is designed to meet strict automotive tolerances, ensuring a secure fitment between your wheel and hub assembly.

• Thread Pitch: M12 x 1.5
• Shank Length: 35mm
• Seat Type: Tapered (Conical)
• Head Size: 17mm Hex
• Finish: Black
• Manufacturer Part Number: 1253501SW
• Origin: Made in Germany

Whether you are fine-tuning vehicle stance with wheel spacers or replacing worn factory hardware, H&R wheel bolts provide the material strength and corrosion-resistant finish required for both street and track applications.