Upgrade your 2015+ Ford Mustang GT for demanding track or street use with the ARP M14 Wheel Stud Kit. Designed as a direct replacement for the factory wheel studs, this kit provides a critical strength upgrade for vehicles running aggressive wheel setups, spacers, or experiencing high lateral loads.

These ARP studs measure 1/2 inch longer than the OEM M14 studs, providing the essential extra thread engagement needed when running thicker wheels, hub-centric spacers, or extended thread lug nuts. Replacing stock studs with high-strength ARP units prevents shearing and ensures optimal wheel retention under heavy braking, acceleration, and cornering.

• Fitment: 2015 and newer Ford Mustang GT
• Stud Thread: M14
• Length: 1/2 inch over stock
• Manufacturer Part Number: 100-7732

Each stud is engineered for superior tensile strength and fatigue resistance, offering peace of mind whether you're at the drag strip, road course, or driving enthusiastically on the street. This kit provides a complete set of wheel studs to refresh all four corners of your Mustang GT.

Upgrade the wheel fastening system on your Chevrolet Corvette C5 with the ARP Long 1/2in Wheel Stud Kit. Designed for enthusiasts running wider wheels, spacers, or frequently changing wheels at the track, these studs provide the necessary extra thread engagement for safe and secure fitment.

Each ARP wheel stud is manufactured from heat-treated 8740 chromoly steel, ensuring superior tensile strength and fatigue resistance compared to factory studs. This material choice is critical for high-stress applications, providing reliable performance under demanding conditions. The extended length allows for proper lug nut engagement even with thick wheel spacers, preventing thread stripping and potential wheel detachment.

• Manufactured from heat-treated 8740 chromoly steel
• Longer than OE studs for increased thread engagement
• 1/2in-20 thread pitch
• Designed for Chevrolet Corvette C5 models
• ARP Part Number: 100-7731

This ARP Extended Wheel Stud Kit (5-Piece) is specifically designed for 2015 and newer Subaru WRX/STI models, as well as 2013 and newer Subaru BRZ models.

Upgrade your vehicle's wheel fastening system with ARP extended wheel studs. These high-strength studs are critical for maintaining proper thread engagement when installing wheel spacers, thicker brake rotors, or certain aftermarket wheels that require additional stud length. Manufactured from premium alloy steel and precisely heat-treated, ARP studs offer significantly higher tensile strength compared to factory wheel studs, enhancing safety and durability under demanding conditions.

• Manufacturer Part Number: 100-7729
• Kit Contents: Five (5) extended wheel studs
• Material: Premium alloy steel
• Treatment: Heat-treated for superior strength and fatigue resistance
• Application: Ensures adequate thread engagement for wheel spacers or thicker hubs
• Fitment: Direct replacement for OEM studs on specified Subaru models

Upgrade your vehicle's wheel studs with the ARP 1.95 UHL 12mm x 1.25 Wheel Stud Kit. Designed for high-performance and racing applications, these studs offer superior strength and reliability compared to factory units. They are ideal for vehicles undergoing frequent wheel changes, track use, or those running wider wheels that demand increased stud integrity.

This kit replaces five individual factory wheel studs, providing enhanced clamping force and resistance to shear stress. The extended 1.95-inch Under Head Length (UHL) accommodates various wheel and spacer combinations, ensuring proper thread engagement with aftermarket lug nuts.

• Manufacturer: ARP
• Part Number: 100-7728
• Thread Pitch: 12mm x 1.25
• Under Head Length (UHL): 1.95 inches
• Quantity: 5 studs per pack

This wheel stud kit is a direct fit replacement for select Subaru WRX, Subaru BRZ, and Scion FR-S models.

This ARP Wheel Stud Kit (Part Number: 100-7727) provides a critical upgrade for your Subaru BRZ or Scion FR-S. Factory wheel studs can be a weak link, especially under the demands of spirited driving, track use, or when running wheel spacers that reduce thread engagement. ARP wheel studs are engineered to offer significantly increased strength and reliability compared to original equipment studs.

Designed as a direct replacement, these studs press into the factory hub, ensuring a precise fit. They are ideal for applications requiring superior clamping force and resistance to shear stresses, providing peace of mind whether you're on the street or the race track.

• Manufacturer Part Number: 100-7727
• Engineered for enhanced strength and durability
• Direct replacement for OEM wheel studs
• Compatible with Subaru BRZ and Scion FR-S models

Upgrade your GM Late Model vehicle's wheel fastening system with the ARP Wheel Stud Kit (P/N: 100-7726). Engineered for extreme strength and reliability, these high-performance wheel studs are essential for demanding applications such as racing, heavy-duty use, or when running aggressive wheels and tires that put extra stress on factory components. Designed to prevent shearing and stretching, ARP studs ensure your wheels stay securely mounted, even under high torque and lateral loads.

Each ARP wheel stud is precision-manufactured from premium alloy steel and undergoes a rigorous heat-treating process to achieve superior tensile strength. The threads are cold-rolled, not cut, which significantly increases fatigue life. This kit directly replaces weaker OEM studs, offering peace of mind and enhanced safety on the street or track.

• Manufacturer Part Number: 100-7726
• Application: GM Late Model vehicles
• Thread Pitch: M12 x 1.5
• Additional Dimension: 2.0-unit (as specified in product identifier)
• Construction: High-strength alloy steel, heat-treated
• Quantity: Kit includes 12 wheel studs

Upgrade the front wheel fastening system on your 1994-2004 Ford Mustang with this ARP Front Wheel Stud Kit. Engineered by a leader in high-performance fasteners, these heavy-duty studs provide superior strength and reliability compared to factory units.

Designed to withstand the increased stresses of racing, aggressive driving, or frequent wheel changes, ARP wheel studs are a critical upgrade for any performance application. They replace your original equipment (OE) front wheel studs directly, ensuring secure wheel mounting even under extreme loads.

• Fitment: 1994-2004 Ford Mustang
• Application: Front Wheels
• Quantity: Set of 5 studs (one wheel)
• Manufacturer Part Number: 100-7724

Fits 2005-2012 Ford Mustang Base, GT, Boss 302, Bullitt, and Shelby GT/GT500 models.

This ARP Rear Wheel Stud Kit (MPN: 100-7723) provides a critical upgrade over factory hardware for drivers demanding increased reliability and safety. Engineered to withstand the high shear loads associated with performance driving and racing, these studs offer a precise fit and superior strength to ensure your wheels remain securely fastened under extreme conditions.

• Manufacturer Part Number: 100-7723
• Position: Rear Axle
• Quantity: Set of 5 Studs
• Application: Direct replacement for select S197 Mustang chassis

Fits select 2005-2012 Ford Mustang Base, GT, Boss 302, and Shelby GT500 models. The ARP Front Wheel Stud Kit (MPN: 100-7722) provides a high-strength replacement for factory wheel studs, designed to handle the increased loads and stresses of performance driving and racing environments.

These studs are precision-manufactured to ensure proper thread engagement and consistent clamping force on the front hub assembly. Replacing worn or standard-grade OE hardware with ARP fasteners offers greater reliability for vehicles running aftermarket wheels or those subjected to frequent wheel changes at the track.

• Manufacturer Part Number: 100-7722
• Position: Front Wheel
• Kit Quantity: 5 Studs
• Application: Direct fit for 2005-2012 Ford Mustang hubs

Upgrade your Dodge Neon's front hubs with the ARP 100-7721 Front Wheel Stud Kit. Engineered to replace weak or stretched factory wheel studs, this kit is crucial for performance applications, track use, or any vehicle experiencing frequent wheel changes where increased strength and reliability are paramount.

ARP wheel studs are manufactured from premium-grade, heat-treated alloy, providing significantly higher tensile strength than original equipment studs. This enhanced strength prevents stud stretching or shearing under extreme loads, ensuring consistent wheel clamping force and improved safety. Each stud features precision-rolled threads for optimal engagement and durability, making wheel installation and removal smoother and more consistent.

• Part Number: 100-7721
• Application: Front Wheel Stud Kit
• Vehicle Fitment: Dodge Neon
• Material: High-strength, heat-treated alloy
• Thread Type: Precision-rolled threads

Fits 1994-2005 Mazda Miata (All submodels including Base, LS, M Edition, and Mazdaspeed).

The ARP 100-7720 Rear Wheel Stud Kit provides a high-strength solution for owners looking to replace worn or standard-grade factory hardware. Specifically designed for the rear hubs of NA and NB generation Miatas, this kit ensures a secure, reliable connection between the wheel and hub under demanding driving conditions. These studs are a direct replacement for original equipment, offering the precise fitment and durability required for performance applications.

• Manufacturer Part Number: 100-7720
• Quantity: Set of 4 studs
• Placement: Rear Hub
• Compatibility: 1994-2005 Mazda Miata (All trims)
• Bolts directly to factory mounting points

Fits select 1990-2005 Mazda Miata models including Base, LS, Mazdaspeed, and Special Editions. This ARP wheel stud kit provides a critical strength upgrade over factory hardware, ensuring maximum wheel security and hub integrity under high-performance driving conditions.

These studs are designed as a direct replacement for worn or damaged OE wheel studs, offering the precise tolerances and high-tensile strength required for track use or when installing high-offset wheels. For early NA chassis models (1990-1993), this kit serves both front and rear applications. For later NB chassis models (1994-2005), these studs are specifically for front hub fitment.

• Manufacturer Part Number: 100-7719
• Quantity: Set of 4 Studs
• Fitment (1990-1993): Front and Rear Hubs
• Fitment (1994-2005): Front Hubs Only
• Construction: High-strength replacement for factory wheel studs

Upgrade the front wheel fasteners on your 1986-1989 Toyota Celica GTS with this high-strength wheel stud kit from ARP. Engineered to prevent stud stretch and failure common in demanding driving conditions, these studs are a critical upgrade for any performance application, track use, or even aggressive street driving.

ARP wheel studs are manufactured from a premium alloy steel, far exceeding the strength of original equipment studs. The design ensures proper thread engagement and offers increased tensile strength, providing superior wheel retention and safety.

• Vehicle Fitment: 1986-1989 Toyota Celica GTS (Front Wheels)
• Material: High-strength alloy steel
• Manufacturer Part Number: 100-7718
• Designed for enhanced durability and fatigue resistance
• Replaces factory front wheel studs directly

Fits select 1993-2012 Subaru Impreza, WRX, and STI models (including Base, RS, L, and Outback Sport trims).

Ensure your wheels stay securely fastened under high-stress conditions with the ARP Wheel Stud Kit. This kit is designed for enthusiasts who demand more reliability than factory hardware can provide, offering a significant upgrade in tensile strength and durability. Whether you are replacing a stripped factory stud or prepping for track use, these studs provide the precision fit required for Subaru hubs.

• Manufacturer Part Number: 100-7716
• Quantity: Set of 5 studs (Complete set for one wheel)
• Fitment: Fits all 5-lug Subaru Impreza variants from 1993 to 2012
• Application: Direct replacement for OE wheel studs

Each stud is engineered for consistent clamping force and ease of installation, making them a staple for any Subaru build where performance and safety are priorities.

Fits 1993-2005 Toyota Supra and Lexus IS300.

The ARP Wheel Stud Kit (100-7715) provides a high-strength solution for performance driving and racing applications. These M12x1.5 wheel studs are designed to replace factory hardware, offering superior durability and reliability under extreme loads. Whether you are installing aftermarket wheels or need the confidence for track use, these fasteners ensure secure clamping and consistent performance.

• Manufacturer Part Number: 100-7715
• Thread Size: M12x1.5
• Fitment: 1993-1998 Toyota Supra (Base/Twin Turbo) and 2001-2005 Lexus IS300 (Base/Sportcross)
• Material: High-strength fasteners engineered for performance reliability

Fits select 1992-2012 Chevrolet Corvette, Camaro, and Pontiac Firebird.

The ARP Late Model GM Wheel Stud Kit (100-7713) is an essential upgrade for high-performance and racing applications. These M12 x 1.50 studs are engineered to replace factory hardware, providing the superior strength and reliability needed to withstand the extreme shear loads and heat cycling common in track environments. Designed for precise wheel retention, this kit ensures your wheels remain securely fastened under heavy cornering and acceleration.

• Thread Size: M12 x 1.50
• Manufacturer Part Number: 100-7713
• Direct replacement for OE wheel studs
• High-strength construction for increased safety on track or street
• Fits 1992-2012 Chevrolet Corvette (Base, Z06, ZR1, Grand Sport), 1993-2002 Chevrolet Camaro Z28, and 1993-2002 Pontiac Firebird Formula

Fits select 1988-2007 Acura and Honda models, including Integra, NSX, RSX, TL, Civic, Accord, CRX, Prelude, Fit, and Insight.

The ARP 100-7712 extended wheel stud kit is designed to replace factory hardware when extra length is required for racing regulations, thicker wheel centers, or the use of wheel spacers. These studs are engineered to handle the high-stress loads of performance driving and frequent wheel changes, providing a significant strength upgrade over original equipment.

• Manufacturer Part Number: 100-7712
• Thread Size: M12
• Stud Length: 2.85 inches
• Quantity: Set of 5 studs
• Application: Fits various Acura and Honda hubs (check fitment table for specific trim compatibility)

Fits select 1988-2007 Acura and Honda vehicles including Accord, Civic, Integra, NSX, Prelude, RSX, and TL.

The ARP 100-7711 wheel stud kit is engineered for the high-stress environments of racing and high-performance driving. These 2.85-inch extended studs provide the additional length required for safety when using wheel spacers or aftermarket wheels with thick mounting pads. Unlike standard hardware, these studs are manufactured from premium 8740 chrome moly steel and heat-treated to a 190,000 psi tensile strength rating.

ARP threads are rolled after heat treatment, which provides significantly better fatigue resistance and prevents the galling common in lesser-quality hardware. These are a direct replacement for factory studs, designed to press into the original hub for a secure, high-strength wheel mounting solution.

• Manufacturer Part Number: 100-7711
• Identifier: 80-00
• Thread Size: M12
• Overall Length: 2.85 inches
• Material: 8740 Chrome Moly Steel
• Tensile Strength: 190,000 psi
• Quantity: Set of 4 Studs

Fits select 1988-2007 Acura and Honda models, including Integra, Civic, Accord, NSX, RSX, and TL. This ARP wheel stud kit is a critical upgrade for any performance-oriented vehicle, providing significantly more strength and safety than standard factory hardware. These studs are essential for racing, track days, and high-load street applications where wheels are frequently swapped.

Designed as a direct replacement for original equipment, these M12 studs feature a 1.85-inch length to ensure proper thread engagement and accommodate various wheel styles. By upgrading to ARP hardware, you reduce the risk of stud failure and wheel loss under the extreme shear forces encountered during aggressive driving.

• Manufacturer Part Number: 100-7710
• Thread Diameter: M12
• Underhead Length: 1.85 inches
• Quantity: Kit of 5 studs
• Fits factory hub mounting points

Fits select 1988-2007 Acura and Honda vehicles, including Accord, Civic, Integra, NSX, Prelude, and RSX.

The ARP 100-7709 wheel stud kit is engineered to provide a significant safety upgrade over factory hardware. These studs are a necessity for any vehicle subjected to the high cornering loads of racing or the demands of high-performance street use, where OE studs may be prone to shearing or thread stretching. Each stud is manufactured from heat-treated 8740 chrome moly steel and features a cadmium-plated finish for long-lasting corrosion resistance.

• Manufacturer Part Number: 100-7709
• Material: Heat-treated 8740 chrome moly steel
• Tensile Strength: 190,000 psi
• Finish: Cadmium plated
• Thread Size: M12
• Underhead Length: 1.85 inches
• Kit Quantity: Set of 4 (Services one wheel)

Fits select 1986-2011 Chevrolet Camaro, Chevrolet Corvette, and Mazda RX-7 models.

Ensure your wheels stay securely fastened under high-stress driving conditions with this ARP high-strength wheel stud kit. These studs are designed to replace factory hardware, providing superior tensile strength and reliability compared to standard OE fasteners. Specifically engineered for late-model GM applications and compatible Mazda hubs, these studs are essential for racing, track days, or any high-performance application where shear strength is critical.

• Manufacturer Part Number: 100-7708
• Thread Size: M12 x 1.50
• Quantity: 5 Studs (Set for one wheel)
• Material: High-strength heat-treated alloy
• Fitment: Fits 1993-2002 Chevrolet Camaro, 1992-2011 Chevrolet Corvette, and 1986-1995 Mazda RX-7

Upgrade your vehicle's wheel fastening system with the ARP Wheel Stud Kit (Part No. 100-7703). Engineered by Automotive Racing Products, these high-strength wheel studs are a critical upgrade for any performance or heavy-duty application, ensuring secure wheel retention under all conditions.

This specific kit is designed for precise fitment in Ford rear disc brake applications and Chrysler front wheel hubs. Whether you're replacing stretched or worn original equipment (OE) studs or preparing your vehicle for track use and frequent wheel changes, ARP studs provide superior tensile strength and fatigue resistance compared to stock components. They install directly into the factory hubs, offering enhanced safety and reliability.

• Engineered for high strength and durability
• Direct replacement for specified Ford rear disc brake and Chrysler front wheel applications
• Designed to withstand extreme loads and repeated wheel installations
• Enhances safety and reliability for performance and daily driving
• Manufacturer Part Number: 100-7703

Secure your wheels reliably with the ARP 100-7702 Wheel Stud Kit. This kit is engineered to provide superior clamping force and shear strength compared to original equipment (OE) studs, an essential upgrade for any vehicle.

Designed for specific General Motors applications, these wheel studs are suitable for late model GM vehicles equipped with disc brakes, as well as early model GM vehicles utilizing drum brakes. Whether you're replacing fatigued OE studs or upgrading for increased safety and performance, ARP studs deliver peace of mind.

• Engineered for high strength and durability
• Ensures reliable wheel retention
• Direct replacement for specified GM disc and drum brake applications
• Manufacturer Part Number: 100-7702

When upgrading wheels or replacing fatigued factory hardware, you need reliable wheel studs that can withstand higher stress loads. The ARP Late Model GM Drum Brake Wheel Stud Kit (Part Number 100-7701) delivers the strength and precision required for demanding applications.

Engineered by ARP, a global leader in high-performance fasteners, these wheel studs are designed to provide a secure and consistent clamping force for your wheels. They offer a significant upgrade in durability over original equipment (OE) drum brake wheel studs, making them ideal for high-performance street or competition use where stronger wheel retention is critical.

• Designed for enhanced strength and durability over factory studs.
• Ideal for high-performance and race applications.
• Direct replacement for OE drum brake wheel studs on Late Model GM vehicles.
• Manufactured by ARP, ensuring consistent quality and engineering excellence.
• Manufacturer Part Number: 100-7701