The ARB 0740111 Remote Air Line Hose Coupling Kit provides a professional, surface-mounted connection point for your vehicle's onboard air system. This fitting allows you to relocate your air source to an easily accessible panel, bumper, or cargo area, eliminating the need to reach into hot or cramped engine bays to connect an inflation hose.

Built for durability and high-temperature performance, this coupling features a US Industrial Standard (ISO 6150 B) female socket on the front and a JIC-04 (37-degree flare) male fitting on the rear. The integrated M18 threads allow for a secure bulkhead or panel-mount installation. This unit is specifically designed to integrate with ARB 07402XX series hoses and requires 0740101 or 0740105 fittings for a complete setup.

• Manufacturer Part Number: 0740111
• Interface: US Industrial Standard (ISO 6150 B) Female to JIC-04 37-degree Flare Male
• Mounting: M18 panel mount for secure surface installation
• System Context: Designed for use with ARB high-temperature inflation hoses and onboard compressors
• Quantity: Sold as a single unit (1-Pack)

The ARB 0740110 is a specialized 90-degree elbow fitting designed to facilitate clean air system plumbing in confined spaces. These fittings allow you to connect a standard 1/4" NPT port, such as those found on ARB CKM series compressors and manifolds, to JIC-04 (37-degree flare) 07402XX series stainless braided PTFE hoses. By using a 90-degree bend at the port, you eliminate the risk of hose fatigue caused by sharp bends in tight quarters.

Built for the rigors of off-road use, these fittings are constructed from nickel-plated brass to provide long-term corrosion resistance in engine bays or chassis-mounted environments. This 2-pack ensures you have the necessary hardware to complete a front-to-back on-demand air setup.

• Material: Nickel-plated brass for superior corrosion resistance
• Design: 90-degree elbow for high-clearance routing
• Fitting A: JIC-04 (37-degree flare) Male
• Fitting B: 1/4" NPT Male
• Compatibility: Ideal for ARB CKM compressors and 07402XX series hoses
• Quantity: 2 fittings per pack
• MPN: 0740110

This ARB 1/4" NPT Tee Adapter is engineered to split a single 1/4" NPT port into two outlets, providing a versatile plumbing solution for onboard pneumatic systems. It is specifically designed for use with ARB air compressors, air tanks, and manifold kits where port space is limited.

This fitting is particularly useful for technicians and DIY installers who need to gain an additional 1/4" NPT outlet on an ARB compressor while maintaining the connection for the factory-supplied pressure switch. The 3-way configuration ensures a reliable, leak-free split for air lines, gauges, or sensors.

• Configured as a 3-way tee with one male and two female ports
• Standard 1/4-inch NPT threading for universal compatibility with ARB components
• Sold as a 2-pack for complete system plumbing
• Manufacturer Part Number: 0740106

The ARB Air Line Adapter Fitting (0740105) provides a reliable transition between JIC-04 and 1/8 in BSPP ports, common in air locker and compressor manifold systems. These adapters are engineered for high-pressure pneumatic applications, featuring a 37-degree flare on the JIC side and a parallel thread with a dedicated O-ring seal on the BSP side for a leak-free connection.

• Interface: JIC-04 (37-degree flare) to 1/8 in BSP Parallel (BSPP).
• Durable Construction: Manufactured from nickel-plated brass for superior corrosion resistance and longevity.
• Installation: 14mm hex/spanner size allows for easy tightening with standard hand tools.
• Sealing: Includes pre-installed O-ring for a secure, airtight seal on the 1/8 in BSPP port.
• Package Includes: Two (2) individual adapter fittings.
• MPN: 0740105

The ARB 0740104 is a specialized 90-degree elbow fitting designed for pneumatic systems where space is limited and air lines must clear tight obstructions. This fitting allows you to connect a male JIC-04 37-degree flare source—such as an air compressor outlet—to a hose without putting unnecessary strain on the line or risking a kink.

Constructed for high-pressure durability, these fittings feature a parallel thread design with an integrated O-ring seal for a leak-proof connection. This 2-pack ensures you have the necessary hardware for both front and rear locker setups or secondary air tank plumbing.

• Part Number: 0740104
• Connection Type: JIC-04 37-degree flare (Male to Female)
• Angle: 90-degree elbow
• Seal: Parallel fitting with O-ring seal
• Quantity: Sold as a pack of 2 fittings

The ARB JIC-04 37-Degree Male Flare 3-Way Adapter Tee is designed to split air flow from a single hose into two separate lines. Engineered for reliability in demanding off-road air systems, these fittings are commonly used when plumbing multiple air lockers or custom compressor manifolds.

Constructed from nickel-plated brass, these fittings provide excellent corrosion resistance and mechanical strength. The JIC-04 37-degree male flare design ensures a high-pressure, leak-free connection when paired with compatible air lines and fittings. This kit includes two adapter tees to accommodate comprehensive system routing.

• Part Number: 0740103
• Fitting Type: 3-Way Adapter Tee
• Connection: JIC-04 37-Degree Male Flare
• Material: Nickel Plated Brass
• Quantity: Pack of 2

The ARB 0740102 JIC-04 Male Flare Adapter is a precision-engineered fitting designed for reliable air line connections in high-pressure pneumatic systems. This adapter features a standard JIC-04 37-degree male flare on both ends, making it an essential component for extending air lines or adapting ports on ARB air compressors and air locker accessories.

Constructed from nickel-plated brass, these fittings provide superior corrosion resistance and long-term durability in harsh off-road environments. The 14mm spanner hex allows for secure tightening with standard wrenches, ensuring a leak-free seal for your onboard air system.

• Manufacturer Part Number: 0740102
• Fitting Type: JIC-04 Male to JIC-04 Male Flare
• Flare Angle: 37 Degrees
• Material: Nickel-Plated Brass
• Spanner Hex Size: 14mm
• Quantity: Set of 2 Fittings

Ensure a secure, leak-free connection in your vehicle's air system with this ARB air line adapter fitting. Designed to convert a standard 1/4" NPT tapered thread to a JIC-04 male connection, these fittings are essential for plumbing air lockers, compressors, and custom pneumatic setups. The JIC-04 end features a 37-degree flare for a reliable mechanical seal.

Constructed from nickel-plated brass, these adapters offer superior corrosion resistance and durability compared to standard unfinished fittings. The 14mm spanner size allows for easy installation with common shop tools. These are genuine ARB components, engineered to meet the high-pressure demands of off-road air systems.

• Manufacturer Part Number: 0740101
• Threads: 1/4" NPT Tapered Male to JIC-04 Male
• Fitting Type: 37-Degree Flare
• Material: Nickel-Plated Brass
• Wrench/Spanner Size: 14mm
• Quantity: Pack of 2

Fits select 1980-2017 Acura, Buick, Cadillac, and Chevrolet models. The Air Lift Load Controller Dual Heavy Duty Compressor system (MPN 25856) provides convenient, on-the-go air pressure adjustment directly from the driver’s seat. This dual-path system allows for independent control of two air springs (or four springs in pairs), making it the ideal solution for leveling uneven loads or improving stability during cornering by reducing body roll and air transfer between springs.

Built for frequent use, this kit features a heavy-duty compressor designed for durability and faster inflation times. The in-cab control center features a user-friendly analog gauge with integrated inflate and deflate buttons. For added safety, an exclusive low-pressure sensor automatically monitors the system and adds air if the pressure drops below 5 PSI, protecting your air springs from damage. The system is compatible with any brand of air springs and includes a pre-assembled wiring harness for a straightforward installation.

• Dual-path control for independent left-to-right or front-to-back leveling
• Heavy-duty compressor designed for frequent use and frame-mount durability
• Automatic low-pressure sensor activates at 5 PSI to protect air springs
• Analog gauge fits standard 2-1/8 inch gauge pods or can be dash-mounted
• Includes pre-assembled wiring harness and fully illustrated installation manual
• Manufacturer Part Number: 25856

Fits select 1980-2017 Acura, Buick, Cadillac, and Chevrolet vehicles including MDX, Enclave, Riviera, Regal, Fleetwood, Impala, and C/K series trucks. The Air Lift LoadController (Compact, Single Path, Heavy Duty) provides the convenience of on-the-go air pressure adjustment directly from the driver’s seat. This single-path system is engineered to inflate or deflate a pair of air springs simultaneously to the same pressure, ensuring a level load whether you are parked or traveling at highway speeds.

Built for frequent users and heavy-duty towing applications, this kit features a high-capacity compressor that mounts directly to your vehicle's frame. The system includes a dashboard-mounted gauge with integrated one-touch controls and an exclusive low-pressure sensor. This safety feature automatically monitors your air springs and activates the compressor if pressure drops below 5 PSI, protecting your suspension components from damage. Installation is streamlined with a pre-assembled wiring harness and a customizable mounting pod that fits standard 2 1/8-inch gauge openings or flush-mounts to the dash.

• Manufacturer Part Number: 25854
• System Type: Single Path (adjusts two air springs to the same pressure)
• Compressor Grade: Heavy Duty
• Pressure Monitoring: Integrated 5 PSI low-pressure sensor for automatic protection
• Control Type: In-cab analog gauge with one-touch inflate/deflate buttons
• Mounting: Includes 2 1/8 in. gauge pod and mounting cup
• Compatibility: Works with any brand of bellows-style air springs
• Included Hardware: Pre-assembled wiring harness, air lines, and illustrated manual

The Air Lift 16060 is a 12V electric air compressor, designed as a direct replacement component for various Air Lift air suspension kits. This compact unit provides the necessary compressed air to maintain proper pressure in your air springs, ensuring consistent ride height and support.

• Voltage: 12V DC
• Color: Black
• Function: Standard duty electric air compressor
• Manufacturer Part Number: 16060

This replacement compressor is compatible with Air Lift air suspension kits 25592, 25812, 25850, 25852, and 25870.

Fits select 2018-2025 Jeep Wrangler JL and 2020-2025 Jeep Gladiator JT models.

The DV8 Offroad CMJL-01 Engine Bay Compressor Mount provides a secure, dedicated location for mounting an ARB Twin Air Compressor (CKMTA12) under the hood. By positioning the compressor in the engine bay, this bracket eliminates the need for cabin mounting, effectively keeping compressor noise outside while preserving interior storage space for your gear. The mount is positioned to keep the compressor protected from trail debris while ensuring easy access for air line connections.

Built to withstand the heat and vibration of the engine compartment, this bracket features a durable black powder-coated finish to resist corrosion. It is engineered for maximum compatibility, fitting seamlessly with either factory OEM inner fenders or DV8 aftermarket inner fenders. The installation is straightforward, utilizing existing mounting points and including all necessary hardware for a clean, bolt-on fit.

• Specifically designed for the ARB Twin Air Compressor (CKMTA12)
• Durable steel construction with a textured black powder-coated finish
• Moves compressor noise out of the interior cabin
• Retains compatibility with both OEM and DV8 Offroad inner fenders
• Complete kit includes all required installation hardware
• Manufacturer Part Number: CMJL-01

Fits 2021-2025 Ford Bronco models, including Badlands, Base, Big Bend, Black Diamond, Everglades, First Edition, Heritage Edition, Outer Banks, Raptor, Stroppe Edition, and Wildtrak.

The DV8 Offroad Air Compressor Mount & Storage Box (CMBR-01) provides a secure, hidden solution for mounting an ARB Single or Twin on-board air system. By replacing the small factory storage bin with this expanded unit, you can easily manage trail-side tire pressure adjustments without the bulk of a portable compressor. This system installs directly to factory mounting points for a clean, professional finish.

Built for the rigors of off-roading, the CMBR-01 features an additional storage compartment ideal for air hoses, recovery gear, or tools. To protect your equipment from rising exhaust and roadway temperatures, it includes extra-thick heat shielding. The box is further equipped with a water-resistant skin for the ARB mounting points and rubber grommets for precise wire management. Integrated drain plugs provide added versatility, allowing the unit to be used as an ice cooler or easily hosed out after a day on the trail.

• Direct-fit replacement for the OEM storage box using factory mounting locations.
• Specifically designed for ARB Twin or Single on-board air compressors.
• Integrated storage compartment for recovery tools and air accessories.
• Includes heavy-duty heat shielding to reduce internal temperatures from exhaust radiation.
• Water-resistant skin and rubber grommets for clean, protected wiring.
• Dual-function drain plugs for easy cleaning or cooler use.
• Manufacturer Part Number: CMBR-01