Fits 2011-2023 Chrysler 300, Dodge Challenger, and Dodge Charger (3.6L).

The Spectre 9028 air intake system is engineered to reduce air intake restriction and increase airflow to your engine. By replacing the restrictive factory air box and intake tubing, this kit helps improve horsepower and torque while protecting the engine from contaminants. The system features a polished aluminum intake tube and a black powder-coated heat shield designed to isolate the filter from engine heat, ensuring a cooler, denser air charge enters the intake inlet.

This kit places the high-flow air filter on the driver side of the engine compartment and includes all necessary hardware for a direct, bolt-on installation. The included red Spectre air filter is washable and reusable, providing long-term serviceability without the need for frequent replacements.

• Direct replacement for OE air intake systems
• Polished aluminum intake tubing for a custom look and smooth airflow
• Black powder-coated heat shield blocks hot engine air
• Red washable, reusable low-restriction air filter
• Complete installation hardware included: rubber boots, velocity stack, and stainless steel clamps
• Manufacturer Part Number: 9028

Fits 2011-2016 Ford F-250 and F-350 Super Duty (V8-6.2L).

This Spectre Performance cold air intake system is engineered to optimize airflow, helping to increase horsepower and torque while protecting your engine from debris. By replacing the restrictive factory intake with mandrel-bent polished aluminum tubing and a high-flow synthetic filter, this kit improves throttle response and reduces air intake temperatures. The system features a driver-side mounted filter protected by a durable two-piece heat shield to isolate the intake charge from engine heat.

• Polished mandrel-bent aluminum intake tube for smooth, high-volume airflow.
• Washable and reusable low-restriction Spectre red air filter.
• Two-piece black powder-coated heat shield helps block heated engine air.
• Includes velocity stack, high-quality coupler, and stainless steel clamps.
• Simple bolt-on installation with edge trim and all necessary hardware for an OE-style fit.
• Manufacturer Part Number: 9001

Fits 2011-2014 Ford Mustang Base models equipped with the 3.7L V6 engine.

Enhance the breathing efficiency of your 3.7L V6 Mustang with the ROUSH Performance Cold Air Intake Kit. This system replaces the restrictive factory airbox and paper filter with a high-flow induction setup designed to reduce pressure drop and improve airflow into the engine. The kit features a CAD-designed air dam that seals against the hood to isolate the filter from engine bay heat, ensuring a cooler, denser air charge.

The included premium synthetic air filter is washable and reusable, arriving pre-oiled for immediate installation. This bolt-on upgrade utilizes factory mounting points and requires no permanent vehicle modifications.

• Direct Fit: Designed specifically for the 2011-2014 Mustang 3.7L V6.
• High-Flow Filtration: Premium synthetic, pre-oiled, washable/reusable filter media.
• Thermal Isolation: Upgraded air dam prevents engine heat soak.
• Complete Kit: Includes cold air induction tube, airbox assembly, filter, and all necessary mounting hardware.
• Manufacturer Part Number: 421240
• Warranty: ROUSH 90-Day Limited Parts Only Warranty.

The PERRIN Cold Air Intake for the 2022-2026 Subaru WRX replaces the restrictive factory airbox with a free-flowing, mandrel-bent intake system that improves airflow and sharpens throttle response. The standout neon yellow finish isn’t just for looks—the durable powdercoated tubing is corrosion-resistant and engineered to withstand underhood heat.

Designed as a direct bolt-on, the kit uses factory mounting points for a straightforward installation with common hand tools. A high-flow, reusable air filter is included, eliminating the need for disposable paper replacements. The result is a more aggressive induction note and a cleaner engine bay.

• Fits 2022-2026 Subaru WRX
• Mandrel-bent aluminum intake tube with neon yellow powdercoat
• High-flow, washable air filter
• Retains factory mounting locations; no permanent modifications required
• Increased airflow and more pronounced turbo induction sound

Note: Calibration may be required to realize full performance benefits; retains compatibility with the factory engine management system.

The Turbosmart TS-HS275075-BK is a heavy-duty straight silicone coupler designed for high-performance intake and cooling system plumbing. Constructed from multi-layered reinforced silicone, this 75mm long hose is engineered to withstand the extreme temperatures and pressures found in turbocharged and supercharged applications without swelling or fatigue.

• Inner Diameter: 2.75" (70mm)
• Length: 75mm
• Wall Thickness: 5mm
• Material: Multi-layered reinforced silicone
• Temperature Resistance: -50°C to 170°C (-60°F to 340°F)
• Pressure Rating: Up to 220 PSI
• Manufacturer Part Number: TS-HS275075-BK

The Turbosmart Silicone Hose Reducer (TS-HR225275-BK) provides a secure, high-pressure transition between 2.25-inch and 2.75-inch components in forced induction systems. Engineered for high-performance applications, this reducer is built to withstand extreme boost pressures and the high-temperature environment of a turbocharged or supercharged engine bay.

• Dimensions: 2.25" (57mm) to 2.75" (70mm) ID transition
• Construction: Multi-layer reinforced silicone with a 5mm wall thickness for superior abrasion resistance
• Pressure Rating: Designed to handle high-boost applications up to 220 PSI
• Temperature Range: Operating limits from -50°C to 170°C (-60°F to 340°F)
• Durability: Resists swelling and structural fatigue common in OE rubber hoses
• MPN: TS-HR225275-BK

This reducer is ideal for connecting intercooler piping, turbocharger outlets, or intake plenums where size transitions are required without sacrificing flow or reliability.

The Turbosmart 90-degree silicone hose elbow (TS-HE90200-BK) is a heavy-duty plumbing solution designed for high-performance forced induction, intake, and cooling systems. Built to withstand the rigors of high-boost environments, this 2.00-inch ID hose features a 5mm multi-layered reinforced wall that provides superior resistance to expansion and collapse under pressure or vacuum.

• Inner Diameter: 2.00 inches
• Angle: 90 Degrees
• Construction: 5mm multi-layered reinforced silicone
• Temperature Range: -50°C to 170°C (-60°F to 340°F)
• Maximum Pressure Rating: 220 PSI
• Finish: Black
• Manufacturer Part Number: TS-HE90200-BK

Engineered for high-performance turbocharger and engine plumbing, this Turbosmart 45-degree silicone elbow (TS-HE45275-BK) offers superior durability for custom intake and charge pipe configurations. The multi-layered construction provides high burst strength and structural integrity under vacuum or boost pressure.

The hose features a substantial 5mm wall thickness, allowing it to maintain its shape and seal in demanding thermal environments. Whether you are routing air for a turbocharger, intercooler, or coolant system, this black silicone elbow is designed to resist oil, fuel vapors, and extreme temperature cycles without degrading.

• Inner Diameter: 2.75 inches
• Angle: 45 Degrees
• Wall Thickness: 5mm
• Temperature Resistance: -50°C to 170°C (-60°F to 340°F)
• Pressure Rating: 220 PSI
• Construction: Multi-layered reinforced silicone
• Finish: Black with Turbosmart branding
• MPN: TS-HE45275-BK

Fits 2013-2016 Hyundai Genesis Coupe 3.8 models, including Grand Touring, R-Spec, Track, and Ultimate trims (V6-3.8L).

The Torque Solution Thermal Throttle Body Gasket acts as a critical barrier to heat soak, significantly reducing the transfer of heat from the intake manifold to the throttle body. By maintaining a cooler throttle body, you ensure a denser, cooler air charge enters the engine, which is vital for maximizing power and maintaining consistent performance during high-load conditions or track use.

• Reduces intake air temperatures (IATs) by minimizing thermal transfer
• Precision-cut for a perfect fit and reliable seal
• Manufactured from high-temperature resistant thermal insulating material
• Direct replacement for the factory OE gasket
• Installs using factory hardware
• Manufacturer Part Number: TS-TBG-070

The Torque Solution Throttle Body Adapter (TS-SU-819) is engineered for 2001-2005 Subaru WRX owners performing intake manifold swaps. This precision-machined adapter allows you to bolt your factory Drive-By-Cable (DBC) throttle body onto a newer Drive-By-Wire (DBW) intake manifold, bridging the gap between different generations of Subaru induction systems.

This adapter is a necessary solution for enthusiasts upgrading to late-model manifolds who need to maintain their mechanical throttle linkage and cable-driven setup. It ensures proper port alignment and a secure, leak-free seal for consistent idle and throttle response.

• Direct fit for 2001-2005 Subaru WRX
• Adapts DBC throttle bodies to DBW intake manifolds
• Retains original throttle cable functionality during manifold swaps
• Precision-machined construction for exact tolerances
• Manufacturer Part Number: TS-SU-819

Fits 2008-2014 Subaru WRX and WRX STI.

The Turbo XS Cold Air Intake (WS08-CAI) is engineered to replace the restrictive factory intake system on your Subaru, providing a more efficient path for airflow to reach the turbocharger. By relocating the air filter to draw in cooler air from outside the hot engine bay, this kit helps improve throttle response and enhances the signature turbo induction sound. Built to withstand the demands of performance driving, this intake system is a straightforward upgrade for the GR and GV chassis.

• System Type: Cold Air Intake
• Fitment: 2008-2014 Subaru WRX and STI models
• Manufacturer Part Number: WS08-CAI

Vehicle Fitment

Fits 2002-2007 Subaru Impreza WRX and WRX STI (including Limited, TR, and STI Limited submodels).

Improve your EJ-series engine's induction efficiency with the Turbo XS Intake (WS-INTAKE). This system is designed to reduce intake restriction, allowing your turbocharger to spool faster and providing a more aggressive engine note under boost. By replacing the baffled factory air box with a high-flow filter and optimized tubing, this intake increases the volume of cool air available to the turbocharger for improved throttle response and performance.

• Direct bolt-on design for a straightforward installation
• Mandrel-bent piping for smooth, consistent airflow
• High-flow reusable filter element
• Compatible with factory mounting points
• Manufacturer Part Number: WS-INTAKE

Fits select 2005-2015 Audi A3, A4, A5, TT, TTS, and Volkswagen CC, Eos, GTI, Jetta, Passat, and Tiguan (2.0T).

The Torque Solution Throttle Body Spacer is engineered to increase intake plenum volume on Audi and Volkswagen 2.0T engines. By creating additional space between the throttle body and the intake manifold, this spacer helps improve air velocity and throttle response. It is a practical modification for enthusiasts looking to optimize the performance of their FSI or TSI induction system.

Each spacer is precision CNC machined for an exact fit and features a durable black finish for corrosion resistance and a clean engine bay aesthetic. The design ensures a straightforward installation using factory mounting points.

• Manufacturer Part Number: TS-TBS-030B
• Finish: Black Anodized
• Material: High-grade CNC Machined Aluminum
• Engine Compatibility: 2.0T (FSI / TSI)
• Designed to increase intake plenum volume
• Improved throttle response

Fits select 2011-2015 Ford F-150 and Mustang (3.5L / 3.7L).

The Torque Solution Throttle Body Spacer (Red) is designed to increase intake plenum volume and air velocity, helping to improve throttle response and low-to-mid range torque. This precision-engineered spacer (MPN: TS-TBS-028R) is a straightforward bolt-on upgrade for the Ford 3.5L Ecoboost and 3.7L V6 engines, finished in a durable red anodizing for long-lasting corrosion resistance and a custom look under the hood.

• Manufacturer Part Number: TS-TBS-028R
• Finish: Anodized Red
• Compatible Engines: 3.5L Ecoboost / 3.7L V6
• Designed to improve intake air velocity and plenum volume

Fits 2013-2016 Hyundai Genesis Coupe (V6-3.8L).

The Torque Solution throttle body spacer is designed to increase intake plenum volume and improve air velocity between the throttle body and the intake manifold. By creating a larger volume of pressurized air, this spacer helps optimize throttle response and power delivery throughout the RPM range. This silver-finished component installs directly between the factory throttle body and the intake manifold, utilizing precision tolerances to ensure a leak-free seal.

• Direct fitment for 3.8L V6 Genesis Coupe models
• Corrosion-resistant silver finish
• Simple bolt-on installation
• Manufacturer Part Number: TS-TBS-021

Fitment Applications:
2013-2016 Hyundai Genesis Coupe 3.8 (Base, Grand Touring, R-Spec, Track, Ultimate)

Fits 2010-2014 Hyundai Genesis Coupe 2.0T, including Premium, R-Spec, and Track submodels.

The Torque Solution Throttle Body Spacer is designed to optimize the performance of your intake system by increasing the total plenum volume. This increase in volume helps smooth the transition of airflow into the intake manifold, resulting in improved throttle response and increased torque. This spacer is a direct bolt-on upgrade, precision-engineered to integrate seamlessly between the factory intake manifold and the throttle body.

• Vibrant red finish for corrosion resistance and engine bay aesthetics
• CNC machined for precise fitment and durability
• Designed specifically for the Hyundai 2.0T turbocharged engine
• Improves intake air dynamics and throttle response
• Manufacturer Part Number: TS-TBS-018R

Fits 2010-2014 Hyundai Genesis Coupe models equipped with the 2.0T engine.

The Torque Solution Thermal Throttle Body Gasket is engineered to reduce intake air temperatures by minimizing heat transfer from the intake manifold to the throttle body. By creating a thermal barrier, this gasket helps prevent heat soak, ensuring a cooler and denser air charge for improved combustion efficiency and throttle response. This is a direct-fit replacement for the factory gasket, making it an essential upgrade for tuned or high-performance turbocharged applications.

• Reduces heat soak and lowers intake manifold temperatures
• Constructed from high-temperature resistant thermal polymer
• Precision-cut for an exact seal with factory mounting points
• Helps maintain consistent horsepower by preventing thermal saturation
• Manufacturer Part Number: TS-TBG-068

Fits 2006-2007 Subaru Impreza WRX, WRX Limited, and WRX TR models with the 2.5L Drive-by-Wire engine.

The Torque Solution Thermal Throttle Body Gasket is designed to reduce intake temperatures by significantly decreasing heat transfer from the intake manifold to the throttle body. By creating a thermal barrier, this gasket helps combat heat soak, ensuring a cooler, denser air charge for improved combustion efficiency and consistent performance during spirited driving or track use.

• Direct replacement for the OEM gasket
• Constructed from high-temperature thermal polymer
• Reduces heat soak and lowers intake air temperatures
• Engineered for 2.5L Drive-by-Wire (DBW) systems
• Manufacturer Part Number: TS-TBG-066

Fits 2002-2005 Subaru Impreza WRX (2.0T).

The Torque Solution Thermal Throttle Body Gasket is a high-performance replacement for the factory unit, designed to significantly reduce heat transfer between the intake manifold and the throttle body. By utilizing a specialized thermal polymer, this gasket acts as a heat shield to prevent the throttle body from soaking up engine heat. This results in a cooler, denser air charge entering the intake tract, which is essential for maintaining consistent power and improving combustion efficiency.

• Constructed from high-temperature thermal polymer
• Reduces heat soak to lower intake air temperatures (IATs)
• Precision-cut to ensure a perfect seal with factory mounting points
• Direct replacement for the OEM gasket
• Manufacturer Part Number: TS-TBG-065

The Torque Solution Thermal Throttle Body Gasket is engineered to reduce intake air temperatures by creating a thermal barrier between the intake manifold and the throttle body. By replacing the thin factory gasket with this high-temperature polymer spacer, you significantly reduce heat transfer and help prevent heat soak during high-performance driving conditions.

Fits 2008-2015 Mitsubishi Lancer Evolution X (GSR, MR, MR Touring, and Final Edition).

• Direct replacement for the factory throttle body gasket
• Manufactured from high-quality thermal polymer to resist heat soak
• Helps maintain cooler air intake temperatures for more consistent performance
• Precision CNC cut for exact fitment and reliable sealing
• Manufacturer Part Number: TS-TBG-017

Fits 2005-2006 Mitsubishi Lancer Evolution models including MR, RS, and SE submodels.

The Torque Solution Thermal Throttle Body Gasket is engineered to reduce intake air temperatures by creating a thermal barrier between the intake manifold and the throttle body. By minimizing heat soak, this gasket helps maintain a cooler, denser intake charge, which is essential for consistent power delivery and optimized engine performance in turbocharged applications.

This precision-cut gasket is a direct replacement for the factory unit, offering a superior seal and durability that holds up under extreme heat and pressure. It is an ideal upgrade for 4G63-equipped vehicles where heat management is critical.

• Effective thermal barrier reduces heat transfer to the intake air
• Helps lower intake air temperatures (IATs) for improved efficiency
• Precision cut to ensure perfect fitment and sealing
• Direct replacement for the original equipment gasket
• Manufacturer Part Number: TS-TBG-015

Fits select 1990-2001 Acura Integra, 1999-2000 Honda Civic Si, 1996-1997 Civic del Sol VTEC, and 1997-2001 CR-V.

The Torque Solution Thermal Throttle Body Gasket is a performance-oriented replacement for the factory paper gasket. Designed specifically for B-Series engines with a 60mm bore, this gasket acts as a thermal barrier between the intake manifold and the throttle body. By reducing the transfer of engine heat to the incoming air charge, it helps maintain lower intake air temperatures to mitigate heat soak and support consistent engine performance.

• Bore Size: 60mm
• Material: High-temperature thermal polymer
• Direct replacement for OEM gaskets on OBD2 B-Series configurations
• Helps reduce intake air temperatures by blocking heat transfer
• Precision cut for a perfect seal at the mounting flange
• Manufacturer Part Number: TS-TBG-003

Fits select 2002-2020 Subaru Impreza WRX/STI, Forester XT, Legacy GT, and WRX STI models with EJ engines.

The Torque Solution 8mm Phenolic Thermal Intake Spacer is engineered to reduce intake manifold temperatures by creating a critical thermal barrier between the cylinder heads and the intake manifold. Constructed from high-grade phenolic material, these spacers effectively minimize heat soak, ensuring a cooler, denser air charge for more consistent power delivery and improved combustion efficiency.

Beyond its thermal insulation properties, the 8mm thickness adds volume to the intake runners, which can help optimize airflow and mid-range torque. This is a direct-fit solution for enthusiasts looking to maintain lower intake air temperatures (IATs) during spirited driving or on-track sessions.

• Provides a thermal break to reduce heat transfer into the intake manifold
• Manufactured from durable, high-temperature phenolic material
• 8mm thickness for improved thermal resistance and plenum volume
• Helps maintain lower air intake temperatures for better performance
• Manufacturer Part Number: TS-SU-478-8

Fits select 2002-2020 Subaru Forester, Impreza, Legacy, and WRX STI models (EJ Engines).

Torque Solution Phenolic Thermal Intake Spacers are engineered to create a thermal barrier between the cylinder heads and the intake manifold. By reducing heat transfer, these 3mm spacers effectively lower intake air temperatures (IATs), resulting in a cooler and denser air charge for more consistent performance and improved power potential during high-performance driving.

CNC machined from high-grade phenolic material, these spacers are significantly more effective at resisting heat soak than standard metal gaskets. This is a vital modification for EJ-series engines to combat the high under-hood temperatures common in turbocharged applications. The 3mm height offers a substantial thermal break without requiring extensive modification to the intake manifold plumbing or factory mounting hardware.

• Reduces heat transfer from cylinder heads to the intake manifold
• Increases air density for improved combustion efficiency
• High-grade phenolic material provides superior thermal insulation
• Precision cut for exact fitment on Subaru EJ engine intake ports
• Manufacturer Part Number: TS-SU-478-3

Fits select 2005-2014 Subaru Impreza WRX, WRX STI, and Legacy GT models.

The Torque Solution Post MAF Silicone Intake Hose (TS-SU-009) is a high-strength upgrade for the factory intake tract. Designed to replace the failure-prone and restrictive OEM rubber hose located after the Mass Air Flow sensor, this silicone alternative provides a smoother internal surface for optimized airflow and increased durability under high vacuum and elevated engine bay temperatures.

• Multi-layer reinforced silicone construction for maximum durability
• Replaces restrictive factory rubber post-MAF intake hose
• Smooth interior walls reduce air turbulence to the turbo inlet
• Resists heat soak and prevents collapsing under high load
• Direct fit replacement for a straightforward installation
• Manufacturer Part Number: TS-SU-009

Engineered to withstand the rigors of performance driving, this hose ensures your intake system remains airtight and efficient, preventing the common cracking and leaking issues associated with aged factory rubber components.

Fits 2002-2007 Subaru Impreza WRX and WRX STI (including Limited and TR models).

The Torque Solution Post MAF Silicone Intake Hose is a direct performance replacement for the restrictive factory corrugated rubber hose located between the Mass Air Flow sensor and the turbo inlet. Unlike the OE rubber that can crack, dry rot, or collapse under vacuum over time, this silicone hose is engineered to withstand extreme engine bay temperatures while maintaining its structural integrity.

• Direct fit for 2002-2007 Subaru WRX/STI applications
• High-strength silicone construction resists heat soak and degradation
• Smoother internal walls reduce air turbulence compared to corrugated factory hoses
• Simple bolt-on installation using factory mounting points
• Manufacturer Part Number: TS-SU-008

Fits 2013-2018 Ford Focus ST.

The Torque Solution Sound Symposer Delete (TS-ST-511) is designed to eliminate the artificial engine noise piped into the cabin of your vehicle. By removing the bulky factory sound symposer assembly, you effectively clean up the engine bay and eliminate synthetic drone for a more authentic driving experience.

This block-off plate is CNC-machined from high-grade 6061 billet aluminum and features a 1/8" NPT port, providing a reliable and convenient source for vacuum or boost readings for gauges and other accessories. The kit is finished in a durable black anodizing for long-term corrosion resistance and a professional look under the hood.

• 6061 Billet Aluminum construction
• Black anodized finish for corrosion resistance
• Integrated 1/8" NPT port for vacuum/boost source
• Deletes factory sound symposer unit to reduce engine bay clutter
• Includes all necessary installation hardware
• Manufacturer Part Number: TS-ST-511

Fits 2002-2014 Subaru Impreza WRX, including Limited, Premium, and TR submodels.

The Torque Solution Thermal Intake Manifold Gasket is designed to reduce the transfer of heat from the cylinder heads to the intake manifold. By acting as a thermal barrier, this gasket prevents heat soak, keeping the intake manifold cooler. Lower intake manifold temperatures result in a colder, denser air charge entering the combustion chamber, which helps maintain consistent power levels and improves throttle response during high-performance driving.

Constructed from a high-temperature polymer, this gasket replaces the factory OE gasket and is engineered to withstand the rigors of forced induction engines without compromising the seal. It is an essential upgrade for Subaru owners looking to optimize cooling efficiency and intake performance.

• Manufacturer Part Number: TS-IMG-030-1
• Reduces heat soak into the intake manifold
• Lowers intake air temperatures (IAT) for better air density
• Precision-cut for a perfect fit to the cylinder head ports
• Direct replacement for the factory gasket

Fits 2009-2014 Nissan GT-R (R35) models, including Base, Premium, Black Edition, and Track Edition.

The Torque Solution Thermal Intake Manifold Gasket is designed to reduce the transfer of heat from the cylinder head to the intake manifold. By creating a thermal barrier, this gasket helps maintain lower intake air temperatures, which results in a denser air charge and more consistent horsepower during high-load or track conditions. This gasket is a direct bolt-on replacement for the factory unit, making it an essential upgrade for any R35 owner looking to minimize heat soak.

• Manufactured from high-temperature insulating material
• Direct replacement for the OEM intake manifold gasket
• Reduces intake manifold temperatures and prevents heat soak
• Helps maintain consistent power output by cooling the air charge
• Manufacturer Part Number: TS-IMG-023

Fits 1991-1998 Nissan 240SX (2.4L).

The Torque Solution Thermal Intake Manifold Gasket is engineered to significantly reduce the transfer of heat from the cylinder head to the intake manifold. By acting as a thermal barrier, this gasket helps maintain lower intake air temperatures (IATs), ensuring a denser air charge for improved combustion and consistent power delivery. This is a critical upgrade for enthusiasts looking to combat heat soak in both street and track environments.

• Reduces heat soak to maintain lower intake manifold temperatures
• Precision cut for exact fitment on Nissan KA24 2.4L engines
• Manufactured from high-temperature resistant thermal material
• Direct replacement for the factory intake manifold gasket
• Compatible with OEM and aftermarket intake manifolds
• Manufacturer Part Number: TS-IMG-022-4