The AEM 21-819 Performance Cold Air Intake System replaces both the left and right side housings. This air intake was designed to fit some Infinity Q50 and Q60 models. Both banks uses an oval shaped AEM Dryflow Air Filter. The filter media is made from a synthetic fiber that does not require oiling. The filter also provides excellent filtration and has great air flow. Maintenance is easy since the filter can be used up to 100,000 miles before cleaning is needed (depending on driving conditions). Individual heatshields keep out engine bay heat . The factory MAF sensor mounts directly on the supplied intake tube. The air intake system it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-819 vehicle applications to determine the legal status for each vehicle.

• Utilizes washable, reusable, oil-free synthetic filter media that preserves airflow efficiency, traps harmful contaminants, and provides long-term value over disposable filters.
• AEM Lifetime Limited Warranty

This Part Fits:

The AEM-21-786C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit select Mazda MX-5 Miata models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. Attached to the heat shield is an aluminum coolant overflow reservoir that replaces the stock reservoir so that the air intake will fit properly. The air intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensor and PCV hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-786C vehicle applications to determine the legal status for each vehicle.

• Low restriction aluminum tubing
• AEM Lifetime Limited Warranty

This Part Fits:

The AEM-21-791C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Lexus IS200T L4 2.0L models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the valve cover breather hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the AEM-21-791C vehicle applications to determine the legal status for each vehicle.

• Utilizes washable, reusable, oil-free synthetic filter media that preserves airflow efficiency, traps harmful contaminants, and provides long-term value over disposable filters.
• AEM Lifetime Limited Warranty

This Part Fits:

The AEM 21-792C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Honda Civic models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is placed into the original air box space and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. The air intake tube is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensor and engine vent line. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-792C vehicle applications to determine the legal status for each vehicle.

• Utilizes washable, reusable, oil-free synthetic filter media that preserves airflow efficiency, traps harmful contaminants, and provides long-term value over disposable filters.
• AEM Lifetime Limited Warranty

This Part Fits:

The AEM 21-800C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Honda HR-V models. Air enters the system through an oversized oval AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is relocated to the front of your car near incoming air to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensor and crank case breather hose. The oval shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-800C vehicle applications to determine the legal status for each vehicle.

• Washable and reusable oil-free filter media
• AEM Lifetime Limited Warranty

This Part Fits:

The AEM 21-783C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Hyundai Tucson models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. The air intake tube is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the EVAP and other vent lines. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-783C vehicle applications to determine the legal status for each vehicle.

• Utilizes washable, reusable, oil-free synthetic filter media that preserves airflow efficiency, traps harmful contaminants, and provides long-term value over disposable filters.
• AEM Lifetime Limited Warranty

This Part Fits:

The AEM 21-793C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Nissan Maxima models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is placed into the original air box space and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. The air intake tube is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensor and engine vent hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-793C vehicle applications to determine the legal status for each vehicle.

• Utilizes washable, reusable, oil-free synthetic filter media that preserves airflow efficiency, traps harmful contaminants, and provides long-term value over disposable filters.
• AEM Lifetime Limited Warranty

This Part Fits:

This Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is placed into the original air box space and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. The air intake tube is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the breather hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the vehicle applications to determine the legal status for each vehicle.

• Washable and reusable oil-free filter media
• AEM Lifetime Limited Warranty

This Part Fits:

AEM's 245LPH E85-compatible, direct-fit In-Tank High-Flow Fuel Pump for 2016-up Polaris RZR XP Turbo UTVs (PN 50-1225) plugs into the factory wiring harness and is a direct replacement for the OE RZR XP Turbo fuel pump (fits XP Turbo Models Only, will not fit non-turbo RZRs). It is built to withstand extreme duty, delivering a 44% increase in fuel pressure over the factory fuel pump (115 PSI max pressure AEM vs 80 PSI max pressure stock), and it delivers 100% more flow at the stock 58 PSI base pressure (202lph AEM vs 100lph stock)!

• Each AEM Polaris RZR Turbo fuel pump is tested to flow 245 lph @ 40 PSI (202lph @ 58 PSI RZR XP base pressure)
• Tested and compatible with ethanol fuels up to E100, methanol fuels up to M100 and all types of gasoline
• Delivers 44% increase in fuel pressure over stock (115 PSI max pressure vs 80 PSI stock)
• Provides 100% increase in flow at 58 PSI base fuel pressure (202lph vs 100lph stock)
• Supports 482 HP at 22 PSI of boost on gasoline (313 HP @ 22 PSI on E85)
• Drop in replacement for 2016-up Polaris RZR XP Turbo!
• Compact body (37mm diameter x 70.6mm length)
• Kit includes fuel pump and pre-filter

This Part Fits:

AEM Performance Cold Air Intake Systems produce horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Chevrolet Cruze models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. The air intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air sensor. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). This air intake system is easy to install with commonly available tools. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the vehicle applications to determine the legal status for each vehicle.

• Utilizes washable, reusable, oil-free synthetic filter media that preserves airflow efficiency, traps harmful contaminants, and provides long-term value over disposable filters.
• AEM Lifetime Limited Warranty

This Part Fits:

The AEM 21-795C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Honda Pilot and Ridgeline models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is placed into the original air box location and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. The air intake tube is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensor and vent tube. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-795C vehicle applications to determine the legal status for each vehicle.

• Utilizes washable, reusable, oil-free synthetic filter media that preserves airflow efficiency, traps harmful contaminants, and provides long-term value over disposable filters.
• AEM Lifetime Limited Warranty

This Part Fits:

This Performance Air Intake System allows your engine to breathe more air compared to the restrictive factory air intake housing. It is designed, tuned and dyno-tested to produce more horsepower and torque. This system replaces both the left and right side intakes. The cone shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The durable powder coated heatshields utilize the factory air ducting and the intake tubes are made from roto-molded plastic. This Air Intake System is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the vehicle applications to determine the legal status for each vehicle.

• Utilizes washable, reusable, oil-free synthetic filter media that preserves airflow efficiency, traps harmful contaminants, and provides long-term value over disposable filters.
• AEM Lifetime Limited Warranty

This Part Fits:

This Performance Air Intake System allows your engine to breath more air compared to the restrictive factory air intake housing. It is designed, tuned, and dyno-tested to produce more horsepower and torque. The cone-shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). A custom shaped heat shield with edge trim lining is included to keep engine bay heat from the air intake. The air intake tube is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the vehicle applications to determine the legal status for each vehicle.

• Utilizes washable, reusable, oil-free synthetic filter media that preserves airflow efficiency, traps harmful contaminants, and provides long-term value over disposable filters.
• Lifetime Limited Warranty

This Part Fits:

The AEM 21-836WR Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Subaru WRX STI models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable textured red powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensor. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards while others are 50 state legal. View the 21-836WR vehicle applications to determine the legal status for each vehicle.

• Utilizes washable, reusable, oil-free synthetic filter media that preserves airflow efficiency, traps harmful contaminants, and provides long-term value over disposable filters.
• AEM Lifetime Limited Warranty

This Part Fits:

This Performance Air Intake System allows your engine to breath more air compared to the restrictive factory air intake housing. It is designed, tuned, and dyno-tested to produce more horsepower and torque. The cone-shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). A custom shaped heat shield with edge trim lining is included to keep engine bay heat from the air intake. The air intake tube is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the vehicle applications to determine the legal status for each vehicle.

• Utilizes washable, reusable, oil-free synthetic filter media that preserves airflow efficiency, traps harmful contaminants, and provides long-term value over disposable filters.
• AEM Lifetime Limited Warranty

This Part Fits:

AEM Dryflow Air Filters are engineered with advanced synthetic filtration media that delivers an ideal balance of high airflow, exceptional particle filtration, and long-term performance. Built using durable, oil-free filter material, Dryflow filters provide reliable protection, effortless cleaning, and consistent airflow. This offers a maintenance-friendly solution designed to support both everyday driving and high-performance applications.

• Will NOT void your vehicle’s warranty, performance you can install with total confidence.
• Limited Lifetime Warranty

This Part Fits:

This Performance Air Intake System allows your engine to breathe more air compared to the restrictive factory air intake housing. It is designed, tuned and dyno-tested to produce more horsepower and torque. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. A custom shaped hump hose and heat shield with lid is included. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions).

• Utilizes washable, reusable, oil-free synthetic filter media that preserves airflow efficiency, traps harmful contaminants, and provides long-term value over disposable filters.

This Part Fits:

This Performance Air Intake System allows your engine to breathe more air compared to the restrictive factory air intake housing. It is designed, tuned and dyno-tested to produce more horsepower and torque. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air intake tube is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. A custom shaped heat shield with lid is included. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions).

• Utilizes washable, reusable, oil-free synthetic filter media that preserves airflow efficiency, traps harmful contaminants, and provides long-term value over disposable filters.

This Part Fits:

This Performance Air Intake System allows your engine to breathe more air compared to the restrictive factory air intake housing. It is designed, tuned and dyno-tested to produce more horsepower and torque. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air intake tube is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. A custom shaped heat shield with lid is included. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions).

• Utilizes washable, reusable, oil-free synthetic filter media that preserves airflow efficiency, traps harmful contaminants, and provides long-term value over disposable filters.

This Part Fits:

This Performance Air Intake System allows your engine to breathe more air compared to the restrictive factory air intake housing. It is designed, tuned and dyno-tested to produce more horsepower and torque. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air intake tube is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. A custom shaped heat shield with lid is included. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions).

• Utilizes washable, reusable, oil-free synthetic filter media that preserves airflow efficiency, traps harmful contaminants, and provides long-term value over disposable filters.

This Part Fits:

This Performance Air Intake System allows your engine to breathe more air compared to the restrictive factory air intake housing. It is designed, tuned and dyno-tested to produce more horsepower and torque. Air enters the system from the factory fresh air inlets. through replacement air duct and into a roto-molded, aerodynamic AEM air box containing an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance.The cone shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions).

• Creates a deeper, more aggressive induction tone that highlights the intake system’s improved airflow.

This Part Fits:

AEM's 22 Channel CAN Sensor Module (PN 30-2212) converts analog, digital and frequency inputs into an AEMnet CAN bus signal that can be transmitted to the CD-5 Carbon and CD-7 Digital Dashes. This expansion module provides a way for users with carbureted vehicles to add a CD Dash, and lets users with existing CAN-based devices add more channels to the display for viewing and/or data logging (data logging requires CD-5L Carbon or CD-7L logging Dashes). The 22-Channel CAN Sensor Module is compatible with the CD Dashes only; it will run in parallel with 3rd party CAN devices on the CD dashes but it is currently not compatible with AEM's AQ-1 Data Logger, Series 2 or Infinity ECUs, or 3rd party ECUs or loggers.

• Convert analog, digital and frequency-based inputs to AEMnet CAN bus for display on CD-5 Carbon and CD-7 Dashes!
• Ideal for EFI users who want to add more channels to a CD Dash without purchasing multiple CAN-based devices
• Six Digital Inputs, active low, protected to ~18v, frequency, duty cycle or simple switch
• Four User configurable analog inputs, (jumper selectable; 0-5v, thermistor, or RTD)
• Perfect for users with carbureted vehicles who want to add a CD Dash display
• Wiring harness included with 36-inch flying leads and pre-wired CAN cable
• Two VR pair frequency inputs (crank, wheel or drive shaft speeds)
• Daisy chain two Modules together for additional channels
• IP65-rated enclosure is 'dust tight' and water resistant
• One dedicated fuel level input (0 to 250 ohm range)
• Jumper selectable header length, 11bit or 29 bit
• Jumper selectable CAN bus speeds, 250k,500k,1M
• Jumper selectable terminating resistor
• Four Temperature (thermistor) inputs
• Four Dedicated 0-5V analog inputs
• One Tach Input

AEM Dryflow Air Filters were developed in collaboration with K&N, the inventor of High Flow Air Filters. We adopted some of the best elements of cotton air filters into a new generation synthetic Dryflow Air filter. The three-dimensional filtering medium uses both depth loading and structural screen wire to enhance airflow capabilities and make the filter incredibly easy to clean. The result is a true performance air filter that does not require oiling, carries a lifetime limited warranty and is capable of increasing horsepower and torque.

• Supported by AEM’s trusted warranty, providing long-lasting confidence and reliability for enthusiasts who demand quality.
• Limited Lifetime Warranty

AEM Dryflow Universal Clamp-on Air Filters are washable synthetic air filters designed for a high-efficiency combination of air flow, filtration, and performance. AEM Dryflow filters use an innovative high performance oil-free filtration material that allows easy cleaning, durable service, and excellent filtration. This clamp-on universal air filter has a filter top for higher air flow capability making it great for everyday use.

• Supported by AEM’s trusted warranty, providing long-lasting confidence and reliability for enthusiasts who demand quality.
• Limited Lifetime Warranty

AEM Dryflow Universal Clamp-on Air Filters are washable synthetic air filters designed for a high-efficiency combination of air flow, filtration, and performance. AEM Dryflow filters use an innovative high performance oil-free filtration material that allows easy cleaning, durable service, and excellent filtration. This clamp-on universal air filter has a filter top for higher air flow capability making it great for everyday use.

• Supported by AEM’s trusted warranty, providing long-lasting confidence and reliability for enthusiasts who demand quality.
• Lifetime Reusable Element

AEM Dryflow Air Filters were developed in collaboration with K&N, the inventor of High Flow Air Filters. We adopted some of the best elements of cotton air filters into a new generation synthetic Dryflow Air filter. The three-dimensional filtering medium uses both depth loading and structural screen wire to enhance airflow capabilities and make the filter incredibly easy to clean. The result is a true performance air filter that does not require oiling, carries a lifetime limited warranty and is capable of increasing horsepower and torque.

• Supported by AEM’s trusted warranty, providing long-lasting confidence and reliability for enthusiasts who demand quality.
• Limited Lifetime Warranty

AEM Dryflow Universal Clamp-on Air Filters are washable synthetic air filters designed for a high-efficiency combination of air flow, filtration, and performance. AEM Dryflow filters use an innovative high performance oil-free filtration material that allows easy cleaning, durable service, and excellent filtration. This clamp-on universal air filter has a filter top for higher air flow capability making it great for everyday use.

• Supported by AEM’s trusted warranty, providing long-lasting confidence and reliability for enthusiasts who demand quality.
• Limited Lifetime Warranty

AEM Dryflow Universal Clamp-on Air Filters are washable synthetic air filters designed for a high-efficiency combination of air flow, filtration, and performance. AEM Dryflow filters use an innovative high performance oil-free filtration material that allows easy cleaning, durable service, and excellent filtration. This clamp-on universal air filter has a filter top for higher air flow capability making it great for everyday use.

• Supported by AEM’s trusted warranty, providing long-lasting confidence and reliability for enthusiasts who demand quality.
• Limited Lifetime Warranty

AEM offer high quality brass PSIa sensors in 30(2BAR), 50 (3.5BAR) and 75 (5BAR). PSIa is referenced to absolute zero. Absolute zero is the pressure measurement when all the pressure exerted by the atmosphere has been removed. The most common use for absolute pressure sensors is reading manifold pressure. PSIa sensors are required of you wish to measure vacuum. A PSIa sensor will read about 14.7 PSI when the sensing element is exposed to atmospheric pressure at sea level however they can be recalibrated to read zero at atmospheric and a negative number at values less than atmospheric pressure.

• -Brass body, with high quality sealing which makes it impervious to fluids.
• -Weather resistant connector and pins included
• -Accurate with 3% margin for error.
• -Analog Data Scaled in Charts

AEM offers high quality stainless steel PSIa sensors in 15 (1BAR), 30 (2BAR), 50 (3.5BAR), 75 (5BAR) and 100 (7BAR). PSIa is referenced to absolute zero. Absolute zero is the pressure measurement when all the pressure exerted by the atmosphere has been removed. The most common use for absolute pressure sensors is reading manifold pressure. PSIa pressure sensors are required if you wish to measure vacuum. A PSIa sensor will read about 14.7 PSI when the sensing element is exposed to atmospheric pressure at sea level however they can be recalibrated to read zero at atmospheric and a negative number at values less than atmospheric pressure.

• -Stainless steel body, with high quality sealing which makes it impervious to fluids.
• -Includes 1/8"NPT to -4 AN adapter and barbed fitting.
• -Weather resistant connector and pins included
• -Accurate to 1% margin of error.