Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Welcome to Atlus Automotive
Main menu
-
Performance
- Performance
-
Intake & Exhaust
- Intake & Exhaust
- Air Intake Systems
- Cold Air Intakes
- Air Intake Components
- Air Filters
- Air Filters - Drop In
- Air Filters - Direct Fit
- Air Filters - Universal Fit
- Pre-Filters
- Recharge Kits
- OE Replacement Air Intake Components
- Exhaust, Mufflers & Tips
- Catback
- Axle Back
- Muffler
- Tips
- Headers & Manifolds
- Connecting Pipes
- Catalytic Converter Direct Fit
- Catalytic Converter Universal
- Exhaust Collector
- Merge Collectors
-
Engine Upgrades
- Engine Upgrades
- Engine Components
- Camshafts
- Valve Springs, Retainers
- Head Gaskets
- Head Stud & Bolt Kits
- Main Stud & Bolt Kits
- Gasket Kits
- Engine Mounts
- Oil Catch Cans
- Oil Separators
- Throttle Bodies
- Throttle Body Spacers
- Crankshaft Dampers
- Valves
- Piston Rings
- Piston Sets - Forged - 4cyl
- Piston Sets - Cast - 4cyl
- Connecting Rods - 4Cyl
- Rotating Assemblies
- Stroker Kits
-
Turbo & Cooling
-
Fuel, Ignition & Tuning
-
Suspension & Handling
- Suspension & Handling
-
Lowering & Coilovers
-
Arms, Links & Alignment
-
Lift & Off-Road Suspension
-
Chassis & Bracing
-
Wheels & Tires
- Wheels & Tires
-
Wheels
-
Tires
-
Drivetrain & Clutch
-
Brakes
- Brakes
-
Pads & Rotors
-
Brake Kits & Calipers
-
Lines, Fluid & Hardware
-
Exterior & Lighting
- Exterior & Lighting
-
Lighting
-
Exterior Styling
-
Bumpers & Protection
-
Interior & Electronics
- Interior & Electronics
-
Interior Upgrades
-
Gauges & Electronics
-
Audio & Safety
-
Overland & Utility
- Overland & Utility
-
Bed Covers & Bed Gear
-
Steps, Racks & Storage
-
Trail & Towing
-
Maintenance & Garage
- Maintenance & Garage
-
Oil, Fluids & Filters
-
Detailing & Car Care
-
Tools & Fabrication
Your cart
Choose your Location
-
Atlus
1340 Cobb Dr, Unit 1, Eustis, FL 32736
352-234-4458
Mon – Fri: 8:30 am – 4:30 pm
Sat: 9:00 am – 2:00 pm
Sun: Closed
Product Comparison
How they are Different
|
__ __ |
|
|---|---|
| Description |
Description - __ |
| Rating |
Rating - __ |
| Vendor |
Vendor - __ |
| Color |
Color - __ |
|
|
Compare products ( / )
316 products
316 products
Sort by:
- Featured
- Most relevant
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
A straight-through design, the AWE Touring Edition Axleback is a 3” T304L stainless steel configuration featuring AWE’s proprietary, drone-canceling solution, 180 Technology®. With aggression on-tap, the Touring Edition provides the ultimate experience for drivers wanting the ability to unleash the fury of the LS while providing drone-free in-cabin acoustics at cruising speeds. Responsive to throttle input, the 180 Technology®-equipped Touring Edition is capable of remaining tame until provoked by the driver. Comes complete with quad 4.5" double-walled, slash-cut tips in diamond black.
Installation Instructions- Modular for compatibility: AWE Axlebacks are compatible with the factory X-pipe, and the AWE X-pipe is compatible with factory the axleback
- Touring Edition features AWE’s proprietary straight-through drone-canceling solution, 180 Technology®
- Max gains of +11 hp and +3 lb-ft of torque at the wheels [AWE Axleback + stock X-Pipe]
- Handcrafted from 3” U.S.-sourced CNC mandrel-bent .065” wall T304L stainless steel
- Max gains of +12 hp and +4 lb-ft of torque at the wheels [AWE Axleback + AWE X-Pipe]
- Proudly engineered, designed, and manufactured in-house, in the Pennsylvania, USA
- Less is more: clean, non-baffled, straight-through design maximizes performance
- Available as Touring or Track Edition Axelback; X-pipe available separately
- 4.5” double-walled tips in chrome silver or diamond black
- X-pipe features a bespoke crossover engineered for the LS
- Featuring the AWE Lifetime Exhaust Warranty
- Direct bolt-on, no cutting required
- No Check Engine Light Guaranteed
- Perfect Fitment Guaranteed
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2006-2013 | Chevrolet | Corvette | Z06 |
| 2009-2013 | Chevrolet | Corvette | ZR1 |
The ultimate blend of aggression and sophistication—without the drone. The AWE Touring Edition Axleback brings patented drone-canceling 180 Technology® to the FA21 delivering a tone that’s clean, deep, and composed while cruising—but rowdy when you want it to be. Composed of 2.5” U.S.-sourced T304L stainless steel with a .065” wall thickness, the Touring Edition mates directly to existing flanges on the factory midpipe, and comes complete with new gaskets. Quad 4" double-walled, slash-cut tips in your choice of chrome silver or diamond black are included.
Installation Instructions- Quad 4” double-walled, slash-cut tips in available in chrome silver or diamond black
- Handcrafted from CNC mandrel-bent, U.S.-sourced .065” wall T304L stainless steel
- Proudly engineered, designed, and manufactured in-house at AWE, in the USA
- Touring Edition features AWE’s patented drone-canceling 180 Technology®
- Available as sophisticated Touring Edition or rowdy Track Edition
- Touring Edition: 23 lbs, Track Edition: 12 lbs, Stock: 26 lbs
- Less is more: clean, straight-through design maximizes flow
- 2.5” T304L stainless steel axleback configurations
- Direct bolt-on for factory-like simplicity
- AWE No Check Engine Light Guarantee
- Perfect fitment, guaranteed
- Deep, refined BOXER tone
- 50-state emissions legal
- Lifetime warranty
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2022-2024 | Subaru | WRX | Base |
| 2022-2025 | Subaru | WRX | GT |
| 2022-2025 | Subaru | WRX | Limited |
| 2022-2025 | Subaru | WRX | Premium |
| 2024 | Subaru | WRX | TR |
| 2025 | Subaru | WRX | TS |
A straight-through design, the AWE Touring Edition Axleback is a 3” T304L stainless steel configuration featuring AWE’s proprietary, drone-canceling solution, 180 Technology®. With aggression on-tap, the Touring Edition provides the ultimate experience for drivers wanting the ability to unleash the fury of the 6.2L while providing drone-free in-cabin acoustics at cruising speeds. Responsive to throttle input, the 180 Technology®-equipped Touring Edition is capable of remaining tame until provoked by the driver. The Touring Edition Axleback comes complete with over-axle tubes, rear 180 Technology® resonators, quad 4.5” double-walled tips in chrome silver or diamond black, and all necessary hardware for installation. AWE AFM Valve Simulators (included) are required for vehicles equipped with AFM valves; i.e. Corvette Stingray / Z51 Auto / Z51 Manual (2014-2016) / Grand Sport Auto. All tip options include the AWE logo and double-walling to ensure a mirror finish even under hard usage. All tips are individually adjustable, allowing depth into the bumper to be set according to personal taste.
Installation Instructions- The included AWE AFM Valve Simulators are required for vehicles equipped with AFM valves; i.e. Corvette Stingray / Z51 Auto / Z51 Manual (2014-2016) / Grand Sport Auto
- Peak gains of 18 hp and 16 lb-ft of torque, and max gains of 22 hp @ 6400 rpm and 20 lb-ft of torque @ 4000 rpm, at the wheels (full Touring Edition Axleback Exhaust)
- Touring Edition features AWE's proprietary straight-through drone-canceling solution, 180 Technology®
- Handcrafted from 3-inch U.S.-sourced CNC mandrel-bent .065-inch wall T304L stainless steel
- Included AWE AFM Valve Simulators allow AFM-equipped cars to run full Axleback exhausts
- Less is more: clean, non-baffled, straight-through design maximizes performance
- Proudly engineered, designed, and manufactured in-house, in the USA
- Featuring the AWE Lifetime Exhaust Warranty
- No compromises: all muscle, zero drone
- Significant weight savings over stock
- No Check Engine Light -- Guaranteed
- Perfect Fitment -- Guaranteed
- 4.5-inch double-walled tips
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2019 | Chevrolet | Corvette | Grand Sport |
| 2014-2019 | Chevrolet | Corvette | Stingray |
| 2015-2019 | Chevrolet | Corvette | Z06 |
| 2019 | Chevrolet | Corvette | ZR1 |
A straight-through design, the AWE Touring Edition Axleback is a 3” T304L stainless steel configuration featuring AWE’s proprietary, drone-canceling solution, 180 Technology®. With aggression on-tap, the Touring Edition provides the ultimate experience for drivers wanting the ability to unleash the fury of the LS while providing drone-free in-cabin acoustics at cruising speeds. Responsive to throttle input, the 180 Technology®-equipped Touring Edition is capable of remaining tame until provoked by the driver. Comes complete with quad 4.5" double-walled, slash-cut tips in chrome silver.
Installation Instructions- Modular for compatibility: AWE Axlebacks are compatible with the factory X-pipe, and the AWE X-pipe is compatible with factory the axleback
- Touring Edition features AWE’s proprietary straight-through drone-canceling solution, 180 Technology®
- Max gains of +11 hp and +3 lb-ft of torque at the wheels [AWE Axleback + stock X-Pipe]
- Handcrafted from 3” U.S.-sourced CNC mandrel-bent .065” wall T304L stainless steel
- Max gains of +12 hp and +4 lb-ft of torque at the wheels [AWE Axleback + AWE X-Pipe]
- Proudly engineered, designed, and manufactured in-house, in the Pennsylvania, USA
- Less is more: clean, non-baffled, straight-through design maximizes performance
- Available as Touring or Track Edition Axelback; X-pipe available separately
- 4.5” double-walled tips in chrome silver or diamond black
- X-pipe features a bespoke crossover engineered for the LS
- Featuring the AWE Lifetime Exhaust Warranty
- Direct bolt-on, no cutting required
- No Check Engine Light Guaranteed
- Perfect Fitment Guaranteed
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2006-2013 | Chevrolet | Corvette | Z06 |
| 2009-2013 | Chevrolet | Corvette | ZR1 |
The ultimate blend of aggression and sophistication—without the drone. The AWE Touring Edition Axleback brings patented drone-canceling 180 Technology® to the FA21 delivering a tone that’s clean, deep, and composed while cruising—but rowdy when you want it to be. Composed of 2.5” U.S.-sourced T304L stainless steel with a .065” wall thickness, the Touring Edition mates directly to existing flanges on the factory midpipe, and comes complete with new gaskets. Quad 4" double-walled, slash-cut tips in your choice of chrome silver or diamond black are included.
Installation Instructions- Quad 4” double-walled, slash-cut tips in available in chrome silver or diamond black
- Handcrafted from CNC mandrel-bent, U.S.-sourced .065” wall T304L stainless steel
- Proudly engineered, designed, and manufactured in-house at AWE, in the USA
- Touring Edition features AWE’s patented drone-canceling 180 Technology®
- Available as sophisticated Touring Edition or rowdy Track Edition
- Touring Edition: 23 lbs, Track Edition: 12 lbs, Stock: 26 lbs
- Less is more: clean, straight-through design maximizes flow
- 2.5” T304L stainless steel axleback configurations
- Direct bolt-on for factory-like simplicity
- AWE No Check Engine Light Guarantee
- Perfect fitment, guaranteed
- Deep, refined BOXER tone
- 50-state emissions legal
- Lifetime warranty
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2022-2024 | Subaru | WRX | Base |
| 2022-2025 | Subaru | WRX | GT |
| 2022-2025 | Subaru | WRX | Limited |
| 2022-2025 | Subaru | WRX | Premium |
| 2024 | Subaru | WRX | TR |
| 2025 | Subaru | WRX | TS |
In Axleback form, the AWE Touring Edition Exhaust retains the SS’ factory mid-section, coming in right at the rear axle. The Axleback AWE Touring Edition Exhaust maintains a 3” diameter, shaves weight from the rear, and features AWE’s drone-canceling solution, 180 Technology®. Tip Options: All tip options include the AWE logo and double-walling to ensure a mirror finish even under hard usage. All tips are individually adjustable, allowing depth into the bumper to be set according to personal taste.
- Touring Edition features AWE’s proprietary straight-through drone-canceling solution, 180 Technology®
- AWE Touring Edition Axle-back Exhaust for Gen6 Camaro SS / ZL1 - Chrome Silver Tips (Quad Outlet)
- Handcrafted from 3” U.S.-sourced CNC mandrel-bent .065” wall T304L stainless steel
- Less is more: clean, non-baffled, straight-through design maximizes performance
- Proudly engineered, designed, and manufactured in-house, in the USA
- Featuring the AWE Lifetime Exhaust Warranty
- No compromises: all muscle, zero drone
- No Check Engine Light -- Guaranteed
- Perfect Fitment -- Guaranteed
- 4.5” double-walled tips
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2020-2024 | Chevrolet | Camaro | LT1 |
| 2016-2024 | Chevrolet | Camaro | SS |
| 2017-2024 | Chevrolet | Camaro | ZL1 |
In Axleback form, the AWE Touring Edition Exhaust retains the SS’ factory mid-section, coming in right at the rear axle. The Axleback AWE Touring Edition Exhaust maintains a 3” diameter, shaves weight from the rear, and features AWE’s drone-canceling solution, 180 Technology®. Tip Options: All tip options include the AWE logo and double-walling to ensure a mirror finish even under hard usage. All tips are individually adjustable, allowing depth into the bumper to be set according to personal taste.
- Touring Edition features AWE’s proprietary straight-through drone-canceling solution, 180 Technology®
- AWE Touring Edition Axle-back Exhaust for Gen6 Camaro SS - Chrome Silver Tips (Dual Outlet)
- Handcrafted from 3” U.S.-sourced CNC mandrel-bent .065” wall T304L stainless steel
- Less is more: clean, non-baffled, straight-through design maximizes performance
- Proudly engineered, designed, and manufactured in-house, in the USA
- Featuring the AWE Lifetime Exhaust Warranty
- No compromises: all muscle, zero drone
- No Check Engine Light -- Guaranteed
- Perfect Fitment -- Guaranteed
- 4.5” double-walled tips
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2020-2024 | Chevrolet | Camaro | LT1 |
| 2016-2024 | Chevrolet | Camaro | SS |
The AWE Touring Edition axle back exhaust is a straight-through concept, yet also features AWE’s proprietary drone-canceling solution, 180 Technology® to produce the perfect, drone-free exhaust note. Made in the USA, AWE axle back exhausts are handcrafted from US-sourced T304L stainless steel, and come with a fitment guarantee, a no Check Engine Light guarantee, and a Lifetime Warranty. Complete with your choice of Diamond Black or Chrome Silver double-walled 80mm tips. IMPORTANT NOTE: Quad tip configurations are only available for the 3/428i. If you are opting for the quad-tip option, be sure to also purchase the quad-tip marking template.
- 3D-printed bolt on marking template allows for perfect “quad tip” bumper cut if desired (available for both Non-M Sport and M Sport 428i cars)
- Handcrafted from 3” U.S.-sourced CNC mandrel-bent T304L stainless steel
- Features AWE’s proprietary drone-canceling solution, 180 Technology®
- 80mm double-walled tips available in chrome silver or diamond black
- Max gains of 13 hp and 13 lb-ft of torque at the crank
- Engineered, designed and manufactured in-house at AWE
- A sophisticated Touring Edition Axleback Exhaust.
- Featuring the AWE Lifetime Exhaust Warranty
- Direct bolt-on for factory-like simplicity
- No Check Engine Light - guaranteed
- Perfect fitment - guaranteed
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2012-2016 | BMW | 328i | Base |
| 2012-2016 | BMW | 328i xDrive | Base |
| 2014-2016 | BMW | 428i | Base |
| 2015-2016 | BMW | 428i Gran Coupe | Base |
| 2014-2016 | BMW | 428i xDrive | Base |
| 2015-2016 | BMW | 428i xDrive Gran Coupe | Base |
Solid gains and 180 Technology®-packed attitude -- the perfect combination for a no-compromise B58 exhaust upgrade: The AWE Touring Edition Exhaust is an Axleback system that leverages AWE’s proprietary drone-canceling solution, 180 Technology®, to produce the perfect, drone-free exhaust note. All tip options include the AWE logo and double walling to ensure a mirror finish even under hard usage. All tips are individually adjustable, allowing depth into the bumper to be set according to personal taste. Important fitment notes All products are confirmed to fit both manual and automatic transmission, as well as RWD and xDrive vehicles.
- Straight-through design featuring AWE's proprietary drone-cancelling solution, 180 Technology®
- Handcrafted, CNC mandrel-bent 2.5” U.S.-sourced T304L stainless steel
- Max gains of 9 hp and 11 lb-ft of torque at the crank
- Engineered, designed and manufactured in house at AWE
- Full 3” CNC mandrel-bent system
- No Check Engine Light Guarantee
- Axleback design for the street
- Perfect Fitment Guarantee
- Lifetime Exhaust Warranty
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2016-2018 | BMW | 340i | Base |
| 2016-2018 | BMW | 340i xDrive | Base |
| 2017-2020 | BMW | 440i | Base |
| 2017-2020 | BMW | 440i Gran Coupe | Base |
| 2017-2020 | BMW | 440i xDrive | Base |
| 2017-2020 | BMW | 440i xDrive Gran Coupe | Base |
Solid gains and 180 Technology®-packed attitude -- the perfect combination for a no-compromise B58 exhaust upgrade: The AWE Touring Edition Exhaust is an Axleback system that leverages AWE’s proprietary drone-canceling solution, 180 Technology®, to produce the perfect, drone-free exhaust note. All tip options include the AWE logo and double walling to ensure a mirror finish even under hard usage. All tips are individually adjustable, allowing depth into the bumper to be set according to personal taste. Important fitment notes All products are confirmed to fit both manual and automatic transmission, as well as RWD and xDrive vehicles.
- Straight-through design featuring AWE's proprietary drone-cancelling solution, 180 Technology®
- Handcrafted, CNC mandrel-bent 2.5” U.S.-sourced T304L stainless steel
- Max gains of 9 hp and 11 lb-ft of torque at the crank
- Engineered, designed and manufactured in house at AWE
- Full 3” CNC mandrel-bent system
- No Check Engine Light Guarantee
- Axleback design for the street
- Perfect Fitment Guarantee
- Lifetime Exhaust Warranty
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2016-2018 | BMW | 340i | Base |
| 2016-2018 | BMW | 340i xDrive | Base |
| 2017-2020 | BMW | 440i | Base |
| 2017-2020 | BMW | 440i Gran Coupe | Base |
| 2020 | BMW | 440i xDrive | Base |
| 2017-2020 | BMW | 440i xDrive Gran Coupe | Base |
Solid gains and 180 Technology®-packed attitude -- the perfect combination for a no-compromise B58 exhaust upgrade: The AWE Touring Edition Exhaust is an Axleback system that leverages AWE’s proprietary drone-canceling solution, 180 Technology®, to produce the perfect, drone-free exhaust note. All tip options include the AWE logo and double walling to ensure a mirror finish even under hard usage. All tips are individually adjustable, allowing depth into the bumper to be set according to personal taste.
- Straight-through design featuring AWE's proprietary drone-cancelling solution, 180 Technology®
- Handcrafted, CNC mandrel-bent 2.5” U.S.-sourced T304L stainless steel
- Max gains of 9 hp and 11 lb-ft of torque at the crank
- Engineered, designed and manufactured in house at AWE
- Full 3” CNC mandrel-bent system
- No Check Engine Light Guarantee
- Axleback design for the street
- Perfect Fitment Guarantee
- Lifetime Exhaust Warranty
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2014-2016 | BMW | M235i | Base |
| 2015-2016 | BMW | M235i xDrive | Base |
| 2017-2021 | BMW | M240i | Base |
| 2017-2021 | BMW | M240i xDrive | Base |
Hundreds of hours of research, prototyping, engineering, testing, and daily usage evaluation plus over two decades of performance engineering for European autos has yielded the ultimate exhaust for the BMW F30 335i. The AWE Touring Edition Exhaust is an Axleback system that leverages AWE’s proprietary drone-canceling solution, 180 Technology®, to produce the perfect exhaust note, drone-free.All products are confirmed to fit both RWD and X Drive vehicles.
- Straight through design featuring AWE drone-canceling 180 Technology®
- Max gains of 15 hp and 32 lb-ft of torque at the crank
- Engineered, designed and manufactured in house at AWE
- Tip options include 102mm double walled tips
- Crafted from T304L stainless steel
- No Check Engine Light - Guaranteed
- Full 3” CNC mandrel bent system
- Axleback design for the street
- AWE Lifetime Exhaust Warranty
- Perfect Fitment - Guaranteed
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2012-2015 | BMW | 335i | Base |
| 2013-2015 | BMW | 335i xDrive | Base |
| 2014-2016 | BMW | 435i | Base |
| 2015-2016 | BMW | 435i Gran Coupe | Base |
| 2014-2016 | BMW | 435i xDrive | Base |
| 2015-2016 | BMW | 435i xDrive Gran Coupe | Base |
Solid gains and 180 Technology®-packed attitude -- the perfect combination for a no-compromise B58 exhaust upgrade: The AWE Touring Edition Exhaust is an Axleback system that leverages AWE’s proprietary drone-canceling solution, 180 Technology®, to produce the perfect, drone-free exhaust note. All tip options include the AWE logo and double walling to ensure a mirror finish even under hard usage. All tips are individually adjustable, allowing depth into the bumper to be set according to personal taste. Important fitment notes All products are confirmed to fit both manual and automatic transmission, as well as RWD and xDrive vehicles.
- Straight-through design featuring AWE's proprietary drone-cancelling solution, 180 Technology®
- Handcrafted, CNC mandrel-bent 2.5” U.S.-sourced T304L stainless steel
- Max gains of 9 hp and 11 lb-ft of torque at the crank
- Engineered, designed and manufactured in house at AWE
- Full 3” CNC mandrel-bent system
- No Check Engine Light Guarantee
- Axleback design for the street
- Perfect Fitment Guarantee
- Lifetime Exhaust Warranty
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2016-2018 | BMW | 340i | Base |
| 2016-2018 | BMW | 340i xDrive | Base |
| 2017-2020 | BMW | 440i | Base |
| 2017-2020 | BMW | 440i Gran Coupe | Base |
| 2017-2020 | BMW | 440i xDrive | Base |
| 2017-2020 | BMW | 440i xDrive Gran Coupe | Base |
Hundreds of hours of research, prototyping, engineering, testing, and daily usage evaluation plus over two decades of performance engineering for European autos has yielded the ultimate exhaust for the BMW F30 335i. The AWE Touring Edition Exhaust is an Axleback system that leverages AWE’s proprietary drone-canceling solution, 180 Technology®, to produce the perfect exhaust note, drone-free.All products are confirmed to fit both RWD and X Drive vehicles.
- Straight through design featuring AWE drone-canceling 180 Technology®
- Max gains of 15 hp and 32 lb-ft of torque at the crank
- Engineered, designed and manufactured in house at AWE
- Tip options include 102mm double walled tips
- Crafted from T304L stainless steel
- No Check Engine Light - Guaranteed
- Full 3” CNC mandrel bent system
- Axleback design for the street
- AWE Lifetime Exhaust Warranty
- Perfect Fitment - Guaranteed
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2012-2015 | BMW | 335i | Base |
| 2013-2015 | BMW | 335i xDrive | Base |
| 2014-2016 | BMW | 435i | Base |
| 2015-2016 | BMW | 435i Gran Coupe | Base |
| 2014-2016 | BMW | 435i xDrive | Base |
| 2015-2016 | BMW | 435i xDrive Gran Coupe | Base |
| 2013-2015 | BMW | ActiveHybrid 3 | Base |
Hundreds of hours of research, prototyping, engineering, testing, and daily usage evaluation plus over two decades of performance engineering for European autos has yielded the ultimate exhaust for the BMW F30 335i. The AWE Touring Edition Exhaust is an Axleback system that leverages AWE’s proprietary drone-canceling solution, 180 Technology®, to produce the perfect exhaust note, drone-free.All products are confirmed to fit both RWD and X Drive vehicles.
- Straight through design featuring AWE drone-canceling 180 Technology®
- Max gains of 15 hp and 32 lb-ft of torque at the crank
- Engineered, designed and manufactured in house at AWE
- Tip options include 90mm double walled tips
- Crafted from T304L stainless steel
- No Check Engine Light - Guaranteed
- Full 3” CNC mandrel bent system
- Axleback design for the street
- AWE Lifetime Exhaust Warranty
- Perfect Fitment - Guaranteed
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2012-2015 | BMW | 335i | Base |
| 2013-2015 | BMW | 335i xDrive | Base |
| 2014-2016 | BMW | 435i | Base |
| 2015-2016 | BMW | 435i Gran Coupe | Base |
| 2014-2016 | BMW | 435i xDrive | Base |
| 2013-2015 | BMW | ActiveHybrid 3 | Base |
The AWE 328i / 430i Touring Edition axle back exhaust is a straight-through concept, yet also features AWE’s proprietary drone-canceling solution, 180 Technology® to produce the perfect, drone-free exhaust note. Made in the USA, AWE axle back exhausts for the 328i / 430i are handcrafted from US-sourced T304L stainless steel, and come with a fitment guarantee, a no Check Engine Light guarantee, and a Lifetime Warranty. Complete with your choice of Diamond Black or Chrome Silver double-walled 80mm tips.
- Handcrafted from 3” U.S.-sourced CNC mandrel-bent T304L stainless steel
- Features AWE’s proprietary drone-canceling solution, 180 Technology®
- Max gains of 13 hp and 13 lb-ft of torque at the crank
- Engineered, designed and manufactured in-house at AWE
- A sophisticated Touring Edition Axleback Exhaust.
- Featuring the AWE Lifetime Exhaust Warranty
- Direct bolt-on for factory-like simplicity
- No Check Engine Light - guaranteed
- Perfect fitment - guaranteed
- 80mm double-walled tips
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2012-2016 | BMW | 328i | Base |
| 2012-2016 | BMW | 328i xDrive | Base |
| 2017-2018 | BMW | 330i | Base |
| 2017-2018 | BMW | 330i xDrive | Base |
| 2014-2016 | BMW | 428i | Base |
| 2015-2016 | BMW | 428i Gran Coupe | Base |
| 2014-2016 | BMW | 428i xDrive | Base |
| 2015-2016 | BMW | 428i xDrive Gran Coupe | Base |
| 2017-2020 | BMW | 430i | Base |
| 2017-2020 | BMW | 430i xDrive | Base |
| 2017-2020 | BMW | 430i xDrive Gran Coupe | Base |
$593.00
aFe POWER Mach Force-Xp axle-back exhaust system delivers form and function to your Jeep JL. This efficient, 2 1/2" mandrel-bent Hi-Tuck system delivers extra ground clearance when off-roading by replacing the stock, low-hanging muffler assembly. This stainless steel system utilizes the factory front resonator pipe to produce a very aggressive exhaust tone unleashing all available horsepower and torque.
Installation Instructions- Tubing Is Less Restrictive Than Stock
- Increased Horsepower And Torque
- Cost Effective System
- Aggressive Sound
- MIG Welded
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021 | Jeep | Wrangler | 80th Anniversary |
| 2021,2023 | Jeep | Wrangler | Freedom |
| 2023 | Jeep | Wrangler | High Altitude |
| 2023-2025 | Jeep | Wrangler | High Altitude 4xe |
| 2023 | Jeep | Wrangler | High Tide |
| 2021 | Jeep | Wrangler | Islander |
| 2018-2025 | Jeep | Wrangler | Rubicon |
| 2023-2025 | Jeep | Wrangler | Rubicon 4xe |
| 2024-2025 | Jeep | Wrangler | Rubicon X |
| 2024-2025 | Jeep | Wrangler | Rubicon X 4xe |
| 2023-2025 | Jeep | Wrangler | Sahara |
| 2023-2025 | Jeep | Wrangler | Sahara 4xe |
| 2023 | Jeep | Wrangler | Sahara Altitude |
| 2018-2025 | Jeep | Wrangler | Sport |
| 2023 | Jeep | Wrangler | Sport Altitude |
| 2018-2025 | Jeep | Wrangler | Sport S |
| 2024-2025 | Jeep | Wrangler | Sport S 4xe |
| 2021 | Jeep | Wrangler | Unlimited 80th Anniversary |
| 2021 | Jeep | Wrangler | Unlimited Freedom |
| 2021-2022 | Jeep | Wrangler | Unlimited High Altitude |
| 2021-2022 | Jeep | Wrangler | Unlimited High Altitude 4xe |
| 2022 | Jeep | Wrangler | Unlimited High Tide |
| 2021 | Jeep | Wrangler | Unlimited Islander |
| 2018-2019 | Jeep | Wrangler | Unlimited Moab |
| 2018-2022 | Jeep | Wrangler | Unlimited Rubicon |
| 2021-2022 | Jeep | Wrangler | Unlimited Rubicon 4xe |
| 2018-2022 | Jeep | Wrangler | Unlimited Sahara |
| 2021-2022 | Jeep | Wrangler | Unlimited Sahara 4xe |
| 2021-2022 | Jeep | Wrangler | Unlimited Sahara Altitude |
| 2018-2022 | Jeep | Wrangler | Unlimited Sport |
| 2021-2022 | Jeep | Wrangler | Unlimited Sport Altitude |
| 2018-2022 | Jeep | Wrangler | Unlimited Sport S |
| 2021-2022 | Jeep | Wrangler | Unlimited Willys |
| 2021-2022 | Jeep | Wrangler | Unlimited Willys Sport |
| 2021-2025 | Jeep | Wrangler | Willys |
| 2023-2025 | Jeep | Wrangler | Willys 4xe |
| 2021-2024 | Jeep | Wrangler | Willys Sport |
$204.00
aFe's Mach Force-Xp axle-back exhaust system delivers form and function to your Jeep JL. This efficient, 2 1/2" mandrel-bent Hi-Tuck system delivers extra ground clearance when off-roading by replacing the stock, low-hanging muffler assembly. This stainless steel system utilizes the factory front resonator pipe to produce a very aggressive exhaust tone unleashing all available horsepower and torque.
Installation Instructions- Tubing Is Less Restrictive Than Stock
- Increased Horsepower And Torque
- Cost Effective System
- Aggressive Sound
- MIG Welded
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021 | Jeep | Wrangler | 80th Anniversary |
| 2021,2023 | Jeep | Wrangler | Freedom |
| 2023 | Jeep | Wrangler | High Altitude |
| 2023-2025 | Jeep | Wrangler | High Altitude 4xe |
| 2023 | Jeep | Wrangler | High Tide |
| 2021 | Jeep | Wrangler | Islander |
| 2018-2025 | Jeep | Wrangler | Rubicon |
| 2023-2025 | Jeep | Wrangler | Rubicon 4xe |
| 2024-2025 | Jeep | Wrangler | Rubicon X |
| 2024-2025 | Jeep | Wrangler | Rubicon X 4xe |
| 2023-2025 | Jeep | Wrangler | Sahara |
| 2023-2025 | Jeep | Wrangler | Sahara 4xe |
| 2023 | Jeep | Wrangler | Sahara Altitude |
| 2018-2025 | Jeep | Wrangler | Sport |
| 2023 | Jeep | Wrangler | Sport Altitude |
| 2018-2025 | Jeep | Wrangler | Sport S |
| 2024-2025 | Jeep | Wrangler | Sport S 4xe |
| 2021 | Jeep | Wrangler | Unlimited 80th Anniversary |
| 2021 | Jeep | Wrangler | Unlimited Freedom |
| 2021-2022 | Jeep | Wrangler | Unlimited High Altitude |
| 2021-2022 | Jeep | Wrangler | Unlimited High Altitude 4xe |
| 2022 | Jeep | Wrangler | Unlimited High Tide |
| 2021 | Jeep | Wrangler | Unlimited Islander |
| 2018-2019 | Jeep | Wrangler | Unlimited Moab |
| 2018-2022 | Jeep | Wrangler | Unlimited Rubicon |
| 2021-2022 | Jeep | Wrangler | Unlimited Rubicon 4xe |
| 2018-2022 | Jeep | Wrangler | Unlimited Sahara |
| 2021-2022 | Jeep | Wrangler | Unlimited Sahara 4xe |
| 2021-2022 | Jeep | Wrangler | Unlimited Sahara Altitude |
| 2018-2022 | Jeep | Wrangler | Unlimited Sport |
| 2021-2022 | Jeep | Wrangler | Unlimited Sport Altitude |
| 2018-2022 | Jeep | Wrangler | Unlimited Sport S |
| 2021-2022 | Jeep | Wrangler | Unlimited Willys |
| 2021-2022 | Jeep | Wrangler | Unlimited Willys Sport |
| 2021-2025 | Jeep | Wrangler | Willys |
| 2023-2025 | Jeep | Wrangler | Willys 4xe |
| 2021-2024 | Jeep | Wrangler | Willys Sport |
$209.00
aFe POWER Mach Force-Xp axle-back exhaust system delivers form and function to your Jeep JL. This efficient, 2 1/2" mandrel-bent Hi-Tuck system delivers extra ground clearance when off-roading by replacing the stock, low-hanging muffler assembly. This stainless steel system utilizes the factory front resonator pipe to produce a very aggressive exhaust tone unleashing all available horsepower and torque.
Installation Instructions- Tubing Is Less Restrictive Than Stock
- Increased Horsepower And Torque
- Cost Effective System
- Aggressive Sound
- MIG Welded
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021 | Jeep | Wrangler | 80th Anniversary |
| 2021,2023 | Jeep | Wrangler | Freedom |
| 2023 | Jeep | Wrangler | High Altitude |
| 2023-2025 | Jeep | Wrangler | High Altitude 4xe |
| 2023 | Jeep | Wrangler | High Tide |
| 2021 | Jeep | Wrangler | Islander |
| 2018-2025 | Jeep | Wrangler | Rubicon |
| 2023-2025 | Jeep | Wrangler | Rubicon 4xe |
| 2024-2025 | Jeep | Wrangler | Rubicon X |
| 2024-2025 | Jeep | Wrangler | Rubicon X 4xe |
| 2023-2025 | Jeep | Wrangler | Sahara |
| 2023-2025 | Jeep | Wrangler | Sahara 4xe |
| 2023 | Jeep | Wrangler | Sahara Altitude |
| 2018-2025 | Jeep | Wrangler | Sport |
| 2023 | Jeep | Wrangler | Sport Altitude |
| 2018-2025 | Jeep | Wrangler | Sport S |
| 2024-2025 | Jeep | Wrangler | Sport S 4xe |
| 2021 | Jeep | Wrangler | Unlimited 80th Anniversary |
| 2021 | Jeep | Wrangler | Unlimited Freedom |
| 2021-2022 | Jeep | Wrangler | Unlimited High Altitude |
| 2021-2022 | Jeep | Wrangler | Unlimited High Altitude 4xe |
| 2022 | Jeep | Wrangler | Unlimited High Tide |
| 2021 | Jeep | Wrangler | Unlimited Islander |
| 2018-2019 | Jeep | Wrangler | Unlimited Moab |
| 2018-2022 | Jeep | Wrangler | Unlimited Rubicon |
| 2021-2022 | Jeep | Wrangler | Unlimited Rubicon 4xe |
| 2018-2022 | Jeep | Wrangler | Unlimited Sahara |
| 2021-2022 | Jeep | Wrangler | Unlimited Sahara 4xe |
| 2021-2022 | Jeep | Wrangler | Unlimited Sahara Altitude |
| 2018-2022 | Jeep | Wrangler | Unlimited Sport |
| 2021-2022 | Jeep | Wrangler | Unlimited Sport Altitude |
| 2018-2022 | Jeep | Wrangler | Unlimited Sport S |
| 2021-2022 | Jeep | Wrangler | Unlimited Willys |
| 2021-2022 | Jeep | Wrangler | Unlimited Willys Sport |
| 2021-2025 | Jeep | Wrangler | Willys |
| 2023-2025 | Jeep | Wrangler | Willys 4xe |
| 2021-2024 | Jeep | Wrangler | Willys Sport |
$160.00
aFe POWER Mach Force-Xp axle-back exhaust system delivers form and function to your Jeep JL. This efficient, 2 1/2" mandrel-bent Hi-Tuck system delivers extra ground clearance when off-roading by replacing the stock, low-hanging muffler assembly. This stainless steel system utilizes the factory front resonator pipe to produce a very aggressive exhaust tone unleashing all available horsepower and torque.
Installation Instructions- Tubing Is Less Restrictive Than Stock
- Increased Horsepower And Torque
- Cost Effective System
- Aggressive Sound
- MIG Welded
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021 | Jeep | Wrangler | 80th Anniversary |
| 2021,2023 | Jeep | Wrangler | Freedom |
| 2023 | Jeep | Wrangler | High Altitude |
| 2023-2025 | Jeep | Wrangler | High Altitude 4xe |
| 2023 | Jeep | Wrangler | High Tide |
| 2021 | Jeep | Wrangler | Islander |
| 2018-2025 | Jeep | Wrangler | Rubicon |
| 2023-2025 | Jeep | Wrangler | Rubicon 4xe |
| 2024-2025 | Jeep | Wrangler | Rubicon X |
| 2024-2025 | Jeep | Wrangler | Rubicon X 4xe |
| 2023-2025 | Jeep | Wrangler | Sahara |
| 2023-2025 | Jeep | Wrangler | Sahara 4xe |
| 2023 | Jeep | Wrangler | Sahara Altitude |
| 2018-2025 | Jeep | Wrangler | Sport |
| 2023 | Jeep | Wrangler | Sport Altitude |
| 2018-2025 | Jeep | Wrangler | Sport S |
| 2024-2025 | Jeep | Wrangler | Sport S 4xe |
| 2021 | Jeep | Wrangler | Unlimited 80th Anniversary |
| 2021 | Jeep | Wrangler | Unlimited Freedom |
| 2021-2022 | Jeep | Wrangler | Unlimited High Altitude |
| 2021-2022 | Jeep | Wrangler | Unlimited High Altitude 4xe |
| 2022 | Jeep | Wrangler | Unlimited High Tide |
| 2021 | Jeep | Wrangler | Unlimited Islander |
| 2018-2019 | Jeep | Wrangler | Unlimited Moab |
| 2018-2022 | Jeep | Wrangler | Unlimited Rubicon |
| 2021-2022 | Jeep | Wrangler | Unlimited Rubicon 4xe |
| 2018-2022 | Jeep | Wrangler | Unlimited Sahara |
| 2021-2022 | Jeep | Wrangler | Unlimited Sahara 4xe |
| 2021-2022 | Jeep | Wrangler | Unlimited Sahara Altitude |
| 2018-2022 | Jeep | Wrangler | Unlimited Sport |
| 2021-2022 | Jeep | Wrangler | Unlimited Sport Altitude |
| 2018-2022 | Jeep | Wrangler | Unlimited Sport S |
| 2021-2022 | Jeep | Wrangler | Unlimited Willys |
| 2021-2022 | Jeep | Wrangler | Unlimited Willys Sport |
| 2021-2025 | Jeep | Wrangler | Willys |
| 2023-2025 | Jeep | Wrangler | Willys 4xe |
| 2021-2024 | Jeep | Wrangler | Willys Sport |
$858.00
aFe Rebel Series axle-back exhaust system complements your Jeep JL on and off-road. Mandrel bent 409 stainless steel tubing and free-flow muffler delivers increased exhaust flow, performance and tuned sound. MIG welded for durability the system uses factory mounting locations for an OE-style fit and stays put under any driving condition. Dual 4-1/2" black powder coated stainless steel tips with aFe POWER logos makes this system look as good as it performs. A free-flowing, stainless steel, muffler is used to absorb high pitch tones producing a powerful sound and unleashing more horsepower and torque potential. OE-style bayonet hangers are used to maintain a stable pipe location during any driving conditions. The bayonet tip holds the hanger bushing in place for an OE style, long lasting fit.
Installation Instructions- Free Flowing Stainless Steel Muffler
- Hassle Free Installation
- MIG Welded For Strength
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021 | Jeep | Wrangler | 80th Anniversary |
| 2021,2023 | Jeep | Wrangler | Freedom |
| 2023 | Jeep | Wrangler | High Altitude |
| 2023-2025 | Jeep | Wrangler | High Altitude 4xe |
| 2023 | Jeep | Wrangler | High Tide |
| 2021 | Jeep | Wrangler | Islander |
| 2018-2025 | Jeep | Wrangler | Rubicon |
| 2023-2025 | Jeep | Wrangler | Rubicon 4xe |
| 2024-2025 | Jeep | Wrangler | Rubicon X |
| 2024-2025 | Jeep | Wrangler | Rubicon X 4xe |
| 2023-2025 | Jeep | Wrangler | Sahara |
| 2023-2025 | Jeep | Wrangler | Sahara 4xe |
| 2023 | Jeep | Wrangler | Sahara Altitude |
| 2018-2025 | Jeep | Wrangler | Sport |
| 2023 | Jeep | Wrangler | Sport Altitude |
| 2018-2025 | Jeep | Wrangler | Sport S |
| 2024-2025 | Jeep | Wrangler | Sport S 4xe |
| 2021 | Jeep | Wrangler | Unlimited 80th Anniversary |
| 2021 | Jeep | Wrangler | Unlimited Freedom |
| 2021-2022 | Jeep | Wrangler | Unlimited High Altitude |
| 2021-2022 | Jeep | Wrangler | Unlimited High Altitude 4xe |
| 2022 | Jeep | Wrangler | Unlimited High Tide |
| 2021 | Jeep | Wrangler | Unlimited Islander |
| 2018-2019 | Jeep | Wrangler | Unlimited Moab |
| 2018-2022 | Jeep | Wrangler | Unlimited Rubicon |
| 2021-2022 | Jeep | Wrangler | Unlimited Rubicon 4xe |
| 2018-2022 | Jeep | Wrangler | Unlimited Sahara |
| 2021-2022 | Jeep | Wrangler | Unlimited Sahara 4xe |
| 2021-2022 | Jeep | Wrangler | Unlimited Sahara Altitude |
| 2018-2022 | Jeep | Wrangler | Unlimited Sport |
| 2021-2022 | Jeep | Wrangler | Unlimited Sport Altitude |
| 2018-2022 | Jeep | Wrangler | Unlimited Sport S |
| 2021-2022 | Jeep | Wrangler | Unlimited Willys |
| 2021-2022 | Jeep | Wrangler | Unlimited Willys Sport |
| 2021-2025 | Jeep | Wrangler | Willys |
| 2023-2025 | Jeep | Wrangler | Willys 4xe |
| 2021-2024 | Jeep | Wrangler | Willys Sport |
$593.00
aFe's Rebel Series, dual black tip axle-back exhaust system for your 2007 - 2018 Jeep Wrangler (JK) with the V6-3.8L / 3.6L engine. This Rebel Series system is constructed with 2-1/2" mandrel bent 409 stainless steel tubing for improved exhaust flow. Utilizing factory mounting locations, the bayonet tip hangers ensure the Rebel Series exhaust has an OE-style fit and stays put under any driving conditions. A certified craftsman hand MIG welds the system for durability and longevity. High quality band clamps and hardware to provide a quick, hassle-free installation with no modifications necessary. Dual 4-1/2" angle-cut, high temp polished stainless steel exhaust tips with laser-cut aFe POWER badges to finish off the Rebel Series exhaust sys tem for the perfect combination of performance, value and style. Aggressive Sound: A free-flowing, stainless steel, 18" length muffler is used to absorb high pitch tones producing a powerful sound and unleashing more horsepower and torque potential. Dual 4-1/2" polished Exhaust Tips: This dual rear-exit system features 4-1/2" dia. high temp polished, angle-cut, rolled, stainless steel exhaust tips w/ laser-cut aFe POWER badge for a custom-styled look. Installation is a snap: This Rebel Series exhaust system uses all factory mounting locations providing stability and a hassle-free installation. Perfect Fit: OE-style bayonet hangers are used to maintain a stable pipe location during any driving conditions. The bayonet tip holds the hanger bushing in place for an OE style, long lasting fit. Leak-Free Seal: High quality band clamps are used for a complete 360-degree sealing surface.
- Dual Rear Exit High Temp Polished Exhaust Tips
- Free Flowing Stainless Steel Muffler
- Mandrel Bent 409 Stainless Steel
- High Quality Hardware and Clamps
- 100 Percent Hand MIG-Welded
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2011 | Jeep | Wrangler | 70th Anniversary |
| 2016 | Jeep | Wrangler | 75th Anniversary |
| 2007-2017 | Jeep | Wrangler | Rubicon |
| 2007-2017 | Jeep | Wrangler | Sahara |
| 2010-2017 | Jeep | Wrangler | Sport |
| 2016 | Jeep | Wrangler | Sport S |
| 2011 | Jeep | Wrangler | Unlimited 70th Anniversary |
| 2016 | Jeep | Wrangler | Unlimited 75th Anniversary |
| 2007-2017 | Jeep | Wrangler | Unlimited Rubicon |
| 2007-2017 | Jeep | Wrangler | Unlimited Sahara |
| 2010-2017 | Jeep | Wrangler | Unlimited Sport |
| 2016 | Jeep | Wrangler | Unlimited Sport S |
| 2007-2010 | Jeep | Wrangler | Unlimited X |
| 2007-2010 | Jeep | Wrangler | X |
| 2018 | Jeep | Wrangler JK | Rubicon |
| 2018 | Jeep | Wrangler JK | Sahara |
| 2018 | Jeep | Wrangler JK | Sport |
| 2018 | Jeep | Wrangler JK | Sport S |
| 2018 | Jeep | Wrangler JK | Unlimited Rubicon |
| 2018 | Jeep | Wrangler JK | Unlimited Sahara |
| 2018 | Jeep | Wrangler JK | Unlimited Sport |
| 2018 | Jeep | Wrangler JK | Unlimited Sport S |
$619.00
This MACH Force XP Hi-Tuck Axle-Back exhaust system is constructed of 2.5" mandrel-bent 409 stainless steel and comes complete with a free-flowing muffler, tubing, OE style bayonet hangers, band clamps and all hardware necessary for a hassle-free installation. The smooth curves and design of this exhaust system helps remove restriction and keeps exhaust gas flowing smoothly for increased horsepower, torque and throttle response. This kit is a perfect solution for replacing damaged exhaust system components due to extreme weather, road grime or off-road driving.
Installation Instructions- 2.5 IN Mandrel Bent 409 Stainless Steel Tubing
- 4 lbs. Lighter Then Stock
- Hassle-Free Installation
- Simple 1-Piece Design
- Free Flow Muffler
- Hi-Tuck Tip
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2011 | Jeep | Wrangler | 70th Anniversary |
| 2016 | Jeep | Wrangler | 75th Anniversary |
| 2007-2017 | Jeep | Wrangler | Rubicon |
| 2007-2017 | Jeep | Wrangler | Sahara |
| 2010-2017 | Jeep | Wrangler | Sport |
| 2016 | Jeep | Wrangler | Sport S |
| 2011 | Jeep | Wrangler | Unlimited 70th Anniversary |
| 2016 | Jeep | Wrangler | Unlimited 75th Anniversary |
| 2007-2017 | Jeep | Wrangler | Unlimited Rubicon |
| 2007-2017 | Jeep | Wrangler | Unlimited Sahara |
| 2010-2017 | Jeep | Wrangler | Unlimited Sport |
| 2016 | Jeep | Wrangler | Unlimited Sport S |
| 2007-2010 | Jeep | Wrangler | Unlimited X |
| 2007-2010 | Jeep | Wrangler | X |
| 2018 | Jeep | Wrangler JK | Rubicon |
| 2018 | Jeep | Wrangler JK | Sahara |
| 2018 | Jeep | Wrangler JK | Sport |
| 2018 | Jeep | Wrangler JK | Sport S |
| 2018 | Jeep | Wrangler JK | Unlimited Rubicon |
| 2018 | Jeep | Wrangler JK | Unlimited Sahara |
| 2018 | Jeep | Wrangler JK | Unlimited Sport |
| 2018 | Jeep | Wrangler JK | Unlimited Sport S |
$545.00
This axle-back exhaust system is constructed of 3-1/2" - 4" mandrel-bent 409 stainless steel tubing for maximum strength and durability. Finishing off this exhaust system is a 6" diameter polished stainless steel clamp-on exhaust tip. The tip features an aFe POWER logo plate riveted on for a unique style. This system produces a throaty sound unleashing all available horsepower and torque. Utilizing a factory style flange and hangers this system is a direct bolt-on system, which requires no cutting or modifications for a hassle-free installation. Utilizing state-of-the-art computer-aided design technology, this exhaust system is designed for custom, high tolerance factory fitment. 100% MIG-Welded for race-proven strength and durability.
Installation Instructions- Constructed from 3-1/2" - 4" Mandrel-Bent 409 Stainless Steel Tubing
- All Necessary Hardware is Included for a Hassle-Free Installation
- Utilizes Factory Style Flange and Hangers for a Secure Fit
- 6" Diameter Polished Stainless Steel Clamp-On Exhaust Tip
- 100% MIG-Welded for Strength and Durability
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2025 | Ford | F-250 Super Duty | King Ranch |
| 2017-2025 | Ford | F-250 Super Duty | Lariat |
| 2017-2025 | Ford | F-250 Super Duty | Platinum |
| 2017-2025 | Ford | F-250 Super Duty | XL |
| 2017-2025 | Ford | F-250 Super Duty | XLT |
| 2017-2025 | Ford | F-350 Super Duty | King Ranch |
| 2017-2025 | Ford | F-350 Super Duty | Lariat |
| 2017-2025 | Ford | F-350 Super Duty | Platinum |
| 2017-2025 | Ford | F-350 Super Duty | XL |
| 2017-2025 | Ford | F-350 Super Duty | XLT |
$468.00
Apollo GT Series 3 IN 409 Stainless Steel Axle-Back Exhaust System w/ Black Tip Ford Ranger 19-23 L4-2.3L (t)
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2019-2023 | Ford | Ranger | Lariat |
| 2019-2023 | Ford | Ranger | XL |
| 2019-2023 | Ford | Ranger | XLT |
$420.00
3" 409 Stainless Steel Construction: This axle-back exhaust system is constructed of 3" mandrel-bent 409 stainless steel tubing for maximum strength and durability. Aggressive Sound: This system produces an aggressive sound unleashing all available horsepower and torque. Installation: Some cutting may be required, see instruction sheet for further information. Utilizing factory style hangers this system mounts directly to factory mounting locations for a hassle-free installation. Computer-Aided Design: Utilizing state-of-the-art computer-aided design technology, this exhaust system is designed for custom, high tolerance factory fitment. MIG-Welded: 100% MIG-Welded for race-proven strength and durability.
Installation Instructions- Constructed from 3" Mandrel-Bent 409 Stainless Steel Tubing
- Utilizes Factory Style Hangers for a Secure Fit
- 100% MIG-Welded for Strength and Durability
- Deletes OE Rear Mufflers
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2016 | Dodge | Challenger | 392 Hemi Scat Pack Shaker |
| 2017-2023 | Dodge | Challenger | R/T |
| 2017-2019 | Dodge | Challenger | R/T 392 |
| 2016-2023 | Dodge | Challenger | R/T Scat Pack |
| 2021 | Dodge | Challenger | R/T Scat Pack Shaker Widebody |
| 2019-2023 | Dodge | Challenger | R/T Scat Pack Widebody |
| 2015 | Dodge | Challenger | Scat Pack |
| 2015-2018 | Dodge | Challenger | SRT 392 |
| 2018 | Dodge | Challenger | SRT Demon |
| 2015-2022 | Dodge | Challenger | SRT Hellcat |
| 2023 | Dodge | Challenger | SRT Hellcat Jailbreak |
| 2017-2018 | Dodge | Challenger | T/A |
| 2017-2018 | Dodge | Challenger | T/A 392 |
| 2021 | Dodge | Challenger | T/A 392 Widebody |
| 2017-2018 | Dodge | Charger | Daytona 392 |
| 2017-2018 | Dodge | Charger | R/T 392 |
| 2015-2018 | Dodge | Charger | R/T Scat Pack |
| 2019-2023 | Dodge | Charger | Scat Pack |
| 2020 | Dodge | Charger | Scat Pack 392 Widebody |
| 2022-2023 | Dodge | Charger | Scat Pack Widebody |
| 2015-2018 | Dodge | Charger | SRT 392 |
| 2015-2020 | Dodge | Charger | SRT Hellcat |
| 2021 | Dodge | Charger | SRT Hellcat Widebody |
$897.00
This axle-back exhaust system is constructed of 3 IN - 2-1/2 IN mandrel-bent 304 stainless steel tubing for maximum strength and durability. Finishing off this dual exhaust system are quad 4 IN diameter carbon fiber 304 stainless steel clamp-on exhaust tips. The tips features a Takeda logo for a unique style. This system produces a deep sound unleashing all available horsepower and torque. Utilizing a factory style flange and hangers this system is a direct bolt-on system, which requires no cutting or modifications for a hassle-free installation. A mitered merge collector is used to decrease turbulence and increase exhaust velocity resulting in increased horsepower, torque and improved throttle response. State-of-the-art computer-aided design technology is utilized for precise vehicle fitment. 100% MIG-Welded for race-proven strength and durability.
Installation Instructions- Dual Exhaust with Quad 4 IN Diameter Carbon Fiber 304 Stainless Steel Clamp-On Exhaust Tips
- Constructed from 3 IN - 2-1/2 IN Mandrel-Bent 304 Stainless Steel Tubing
- Utilizes Factory Style Flange and Hangers for a Secure Fit
- 100% MIG-Welded for Strength and Durability
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2024 | Kia | K5 | GT |
$545.00
This axle-back exhaust system is constructed of 3 IN - 2-1/2 IN mandrel-bent 304 stainless steel tubing for maximum strength and durability. This system features a high-flow 304 stainless steel muffler, producing a deep sound. This system produces a deep sound unleashing all available horsepower and torque. Utilizing a factory style flange and hangers this system is a direct bolt-on system, which requires no cutting or modifications for a hassle-free installation. This axle-back exhaust system is finished off with a hi-tuck tip that is developed to give you extra clearance during extreme angle climbs or descents protecting exhaust over rough terrain. State-of-the-art computer-aided design technology is utilized for precise vehicle fitment. 100% MIG-Welded for race-proven strength and durability.
Installation Instructions- Constructed from 3 IN - 2-1/2 IN Mandrel-Bent 304 Stainless Steel Tubing
- All Necessary Hardware is Included for a Hassle-Free Installation
- Utilizes Factory Style Flange and Hangers for a Secure Fit
- 100% MIG-Welded for Strength and Durability
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2025-2026 | Mazda | CX-70 | Turbo |
| 2025-2026 | Mazda | CX-70 | Turbo S |
| 2024-2026 | Mazda | CX-90 | PHEV |
| 2024-2026 | Mazda | CX-90 | Turbo |
| 2024-2026 | Mazda | CX-90 | Turbo S |
$545.00
This system produced gains of up to +13 HP and +12 lbs. x Ft. TQ., as measured on our in-house dyno. This axle-back exhaust system is constructed of 2-1/2" mandrel-bent 304 stainless steel tubing for maximum strength and durability. Finishing off this exhaust system are dual 4" diameter polished 304 stainless steel clamp-on exhaust tips. The tips features a laser etched Takeda logo for a unique style. This system produces a deep sound unleashing all available horsepower and torque. Utilizing a factory style flange and hangers this system is a direct bolt-on system, which requires no cutting or modifications for a hassle-free installation. Utilizing state-of-the-art computer-aided design technology, this exhaust system is designed for custom, high tolerance factory fitment. MIG-Welded for race-proven strength and durability.
Installation Instructions- Dual 4" Diameter Polished 304 Stainless Steel Clamp-On Exhaust Tips
- All Necessary Hardware is Included for a Hassle-Free Installation
- Constructed from 2-1/2" Mandrel-Bent 304 Stainless Steel Tubing
- Utilizes Factory Style Flange and Hangers for a Secure Fit
- MIG-Welded for Race-Proven Strength and Durability
- Up to +13 HP and +12 lbs. x Ft. TQ.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2016 | Hyundai | Veloster | Rally Edition |
| 2013-2017 | Hyundai | Veloster | Turbo |
| 2014-2017 | Hyundai | Veloster | Turbo R-Spec |
$606.00
This system produced gains of up to +13 HP and +12 lbs. x Ft. TQ., as measured on our in-house dyno. This axle-back exhaust system is constructed of 2-1/2" mandrel-bent 304 stainless steel tubing for maximum strength and durability. Finishing off this exhaust system are dual 4" diameter blue flame 304 stainless steel clamp-on exhaust tips. The tips features a laser etched Takeda logo for a unique style. This system produces a deep sound unleashing all available horsepower and torque. Utilizing a factory style flange and hangers this system is a direct bolt-on system, which requires no cutting or modifications for a hassle-free installation. Utilizing state-of-the-art computer-aided design technology, this exhaust system is designed for custom, high tolerance factory fitment. MIG-Welded for race-proven strength and durability.
Installation Instructions- Dual 4" Diameter Blue Flame 304 Stainless Steel Clamp-On Exhaust Tips
- All Necessary Hardware is Included for a Hassle-Free Installation
- Constructed from 2-1/2" Mandrel-Bent 304 Stainless Steel Tubing
- Utilizes Factory Style Flange and Hangers for a Secure Fit
- MIG-Welded for Race-Proven Strength and Durability
- Up to +13 HP and +12 lbs. x Ft. TQ.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2016 | Hyundai | Veloster | Rally Edition |
| 2013-2017 | Hyundai | Veloster | Turbo |
| 2014-2017 | Hyundai | Veloster | Turbo R-Spec |
Showing 300/316
Explore Related Collections
- Choosing a selection results in a full page refresh.
- Opens in a new window.