EXCEPT eTorque Mild Hybrid System and Full-Time 4 Wheel Drive. The 2.5" diameter Borla(r) High Clearance Climber / Rock Crawler Cat-Back(tm) system for the Wrangler JL is designed with ground clearance in mind. This system is perfect for off-roading, overlanding, and rock crawling. It features the mellow Touring sound with no drone inside the vehicle. The exhaust exits thru a 2.5" brushed T-304 stainless steel turn down tip. This system comes with the Borla(r) no drone guarantee. Each system is built from premium T-304 stainless steel giving you the absolute best in performance and durability and is a direct bolt on designed specifically for the 3.6L engine. Ultra-smooth mandrel bends ensure maximum flow & power, and precision Computer Numerical Control (CNC) manufacturing ensures an accurate fit. Best of all, Borla(r) stands behind every system with a Million-Mile Warranty. Just what you'd expect from the world's most experienced (and most winning) exhaust brand.

• EXCEPT eTorque Mild Hybrid System and Full-Time 4 Wheel Drive
• High Clearance Climber / Rock Crawler design
• Fits JL models

This Part Fits:

2024-2025 includes E-Ray. Developing systems for the C8 Corvette presented BORLA® engineers with unique challenges, but our team was up to the challenge. This 3" inlet Cat-Back® system includes both AFM ('20-'21)/ DFM ('22-'25) valves and NPP dual mode exhaust valves. The S-Type sound delivers a powerful, balanced sound with a deep tone for an exciting driving experience with no drone inside the vehicle. It features our Polyphonic Harmonizer and SwitchFire® technology. BORLA®'S Polyphonic Harmonizer Technology utilizes patented units that contain pipes of different diameters and lengths to create multiple exhaust notes that harmonize to deliver a clean, rich, full-bodied sound. Completely eliminating the turbulent center intersection of a standard X-Pipe, BORLA®'S patented SwitchFire® design truly blends the combustion pulses from both sides of the engine for improved performance and a custom aggressive sound. Strategically placed heat shielding is included to prevent exhaust heat damage and protect your Corvette. It comes with quad (2 each side) 4" round bright chrome on T-304 stainless steel tips. Systems are also available with black chrome on T-304 stainless steel tips, or carbon fiber tips. The system is constructed using T-304 stainless steel and is backed by our Million Mile Warranty. System ships in 2 boxes. Note: After installation of the BORLA® system, the controllers for the AFM ('20-'21)/ DFM ('22-'25) valves and NPP valves in the exhaust system should be RE-CALIBRATED according to GM Document ID 5406413. BORLA® recommends taking your car to the nearest Chevrolet dealer for the recalibration service.

• Includes AFM ('20-'21)/ DFM ('22-'25) and NPP Valves. Do NOT install on vehicles without O.E. NPP.
• Valve actuator recalibration REQUIRED after installation (Click for details)
• System contains Polyphonic Harmonizer and SwitchFire® Technology
• System ships in 2 boxes

This Part Fits:

EXCEPT Raptor. Add Adapter 60556 for Crew Cab with Standard Bed (6' 7") 156.8" wheelbase, or Adapter 60564 for Ext. Cab with Long Bed (8' 2") 163.7" wheelbase. This 3" into dual 2.25" system features the mellow Touring sound with no drone inside the vehicle and exits through 4" black chrome on T-304 stainless steel tips. Using Borla(r) Stainless Steel Polish p# 21499 is NOT recommended with these black chrome tips. We suggest cleaning the tips with hot water and a microfiber cloth. A system with bright chrome on T-304 stainless steel tips is also available. Borla(r) Cat-Back(tm) and Axle-Back exhaust systems feature patented straight-through and multi-core technology designed to unleash hidden horsepower. Increased exhaust velocity adds power, driving excitement, fuel economy, and the distinctive Borla(r) Sound of Power respected by motoring enthusiasts everywhere. Each system is built from premium, high-quality T-304 stainless steel, superior to T-400 series knockoffs (such as 409), to give you the absolute best in performance and durability. Ultra-smooth mandrel bends ensure maximum flow & power, and precision computer numerical control (CNC) manufacturing ensures an accurate fit. Best of all, Borla(r) stands behind every system with a Million-Mile Warranty. Just what you'd expect from the world's most experienced (and most winning) exhaust brand.

• Add Adapter 60556 for Crew Cab Standard Bed (156.8") wheelbase vehicles
• Add Adapter 60564 for Extended Cab Long Bed (163.7") wheelbase vehicles
• EXCEPT Raptor models

This Part Fits:

This Part Fits:

This 2.5" diameter Borla(r) Axle-Back exhaust system is designed to fit the 5.0L Mustang GT that is NOT equipped with Active Exhaust. It features 4" bright chrome on T-304 stainless steel tips and the classic S-Type sound level with no drone inside the vehicle. Systems with black chrome on T-304 stainless steel tips, and carbon fiber tips are also available. It fits both the coupe and convertible models. The straight-through and patented multi-core technology is designed to unleash hidden horsepower. Increased exhaust velocity adds power, driving excitement, fuel economy, and the distinctive Borla(r) Sound of Power respected by motoring enthusiasts everywhere. Each system is built from premium T-304 stainless steel, superior to T-400 series knockoffs (such as 409), to give you the absolute best in performance and durability. Ultra-smooth mandrel bends ensure maximum flow & power, and precision computer numerical control (CNC) manufacturing ensures an accurate fit. Best of all, Borla(r) stands behind every system with a Million-Mile Warranty. Just what you'd expect from the world's most experienced (and most winning) exhaust brand.

• For vehicles WITHOUT Active Exhaust
• Fits both Coupe and Convertible

This Part Fits:

This system features the aggressive ATAK(r) sound with no drone inside the vehicle. The 2.75" diameter system is designed for vehicles that come from the factory with single tips and are NOT with Dual Mode Exhaust (NPP) valves. By adding Borla(r) X-Pipe with Mid-Pipes part number 60607 (WITHOUT AFM Valves), or 60610 (With AFM Valves) you can create a Cat-Back(tm) system for your Camaro SS Coupe. The X-Pipes with Mid-Pipes do NOT fit Convertibles. It features a durable high temperature black finish on single 4.5" round T-304 stainless steel tips on each muffler assembly. Systems with polished T-304 stainless steel tips, and carbon fiber tips are also available. Systems with bright chrome on T-304 stainless steel tips and carbon fiber tips are also available. Borla(r) Cat-Back(tm) & Axle-Back exhaust systems feature patented straight-through and multi-core technology to unleash hidden horsepower. Increased exhaust velocity adds power, driving excitement, fuel economy, and the distinctive Borla(r) Sound of Power respected by motoring enthusiasts everywhere. Each system is built from premium T-304 austenitic stainless steel, superior to T-400 series knockoffs (such as 409), to give you the absolute best in performance and durability. Ultra-smooth mandrel bends ensure maximum flow & power, and precision computer numerical control (CNC) manufacturing ensures an accurate fit. Best of all, Borla(r) stands behind every system with a Million-Mile Warranty. Just what you'd expect from the world's most experienced (and most winning) exhaust brand.

• This system fits vehicles with O.E. single tips and are NOT equipped with NPP (dual mode exhaust)

This Part Fits:

This Part Fits:

Fits 2015-2023 S550 Mustangs;Fits 2024-Current S650 Mustangs;Manufactured from 1-inch, 1.25-inch, and 1.5-inch DOM steel tubing;Compatible with factory A-arms;Compatible with factory and aftermarket steering racks;Lowers engine up to 0.75-inch with included motor mounts;Adds clearance for large-tube headers and turbo kits;Includes spacers to lower the engine for increased hood clearance;100% bolt-on design;Lightweight design for drag racing;Reduces front end weight by 53 pounds;Available in red and black hammertone powder coat for long lasting good looks;3-4 hour installation time;Proudly designed in the USA!;Proudly made in the USA!

This Part Fits:

Bilstein B4 OE Replacement (Air) dampers are designed to replace the original air suspension systems on many European brand vehicles. Bilstein is an OE supplier for air suspension systems; the quality of these products meets, and typically exceeds, the standards set forth by the vehicle's manufacturer. Bilstein B4 OE Replacement (Air) dampers are designed to connect directly into the original connectors on the vehicle, ensuring modification-free installation and restoration of the original feel of the vehicle.

• Manufactured with 100% new parts for maximum reliability and safety
• Restores original functionality 100%
• 100% OE quality and comfort

This Part Fits:

Bilstein B4 OE Replacement (Air) dampers are designed to replace the original air suspension systems on many European brand vehicles. Bilstein is an OE supplier for air suspension systems; the quality of these products meets, and typically exceeds, the standards set forth by the vehicle's manufacturer. Bilstein B4 OE Replacement (Air) dampers are designed to connect directly into the original connectors on the vehicle, ensuring modification-free installation and restoration of the original feel of the vehicle.

• Manufactured with 100% new parts for maximum reliability and safety
• Restores original functionality 100%
• 100% OE quality and comfort

This Part Fits:

Bilstein B6 Camper shock absorbers and struts are the ideal choice for improving the performance of your camper van. Each damper utilizes a unique, velocity sensitive, digressive piston which reacts to changing road conditions to provide consistent fade free performance. All B6 Camper shock absorbers and struts are tuned for each specific application and increased vehicle weight to assure optimal performance is achieved.

• More engaging driving experience through high traction and precise handling
• Safety plus in crosswinds and in curves due to optimum road grip
• No additional spring change necessary

This Part Fits:

Bilstein B6 4600 shock absorbers are designed as a direct fit upgrade to OE shock absorbers on stock height light trucks and SUV’s. These shock absorbers feature a monotube design which provides consistent fade free performance. B6 4600 shock absorbers utilize a unique, velocity sensitive, digressive piston which reacts to changing road conditions. All B6 4600 shock absorbers are tuned for each specific application to ensure optimal performance is achieved. B6 4600 shock absorbers offer a significant improvement in ride quality, handling, and comfort.

• 46mm monotube design ensures consistent, fade-free performance in all conditions
• Specific tuning for stock height vehicles
• Uses OEM springs and mounting hardware

This Part Fits:

Bilstein B8 5100 shock absorbers are designed as a direct fit solution for lifted trucks and SUV’s. These shock absorbers feature a monotube design which provides consistent fade free performance. B8 5100 shock absorbers utilize a unique, velocity sensitive, digressive piston which reacts to changing road conditions. All B8 5100 shock absorbers are tuned for each specific application to assure optimal performance is achieved. B8 5100 shock absorbers offer a significant improvement in ride quality, handling, and comfort.

• 46mm monotube design ensures consistent, fade-free performance in all conditions
• Patented digressive valving instantly reacts to changing surface conditions
• Vehicle Specific Ride Tuning
• Vehicle specific tuning

This Part Fits:

Bilstein B8 Performance Plus dampers are a performance upgrade to OE dampers designed to be paired with aftermarket lowering springs. These dampers offer application specific valve settings with a monotube design to bring out the best handling performance of a vehicle. Each damper is rigorously tested for quality that meets or exceeds OE standards. B8 Performance Plus dampers are the ideal solution for pairing with a lowering spring for improved handling and sportier look with the added benefit of world-famous Bilstein quality.

• For use with lowering spring sets and production sport suspensions
• Enhanced safety and performance with lowering spring change
• Sporty feel while maintaining comfort
• Vehicle Specific Ride Tuning

This Part Fits:

Bilstein B8 5100 (Steering Damper) is designed as an upgrade to factory steering dampers on trucks and SUVs. Utilizing our proven design, these steering dampers are able to dampen minute movements in the steering and reduce steering vibrations that naturally occur, especially in older vehicles. These steering dampers are zinc coated for resistance to harsh elements and match to all B8 5100 series products. B8 5100 (Steering Damper) will offer a significant improvement in steering, handling and comfort.

• Maintains complete command of your truck, van or SUV at all times
• Allows the ability to dampen minute movements in the steering
• Reduces steering vibrations
• Zinc-Plated Steel Body

This Part Fits:

Bilstein B6 shock absorbers and struts are the ideal choice for improving the performance of any vehicle. Bilstein B6 shock absorbers and struts utilize a unique, velocity sensitive, digressive piston which reacts to changing road conditions to provide consistent fade free performance. All B6 shock absorbers and struts are tuned for each specific application to assure optimal performance is achieved. Bilstein B6 shock absorbers and struts offer a significant improvement in ride quality, handling, and comfort.

• 46mm monotube design ensures consistent, fade-free performance in all conditions
• Specific tuning for stock height vehicles
• Uses OEM springs and mounting hardware

This Part Fits:

BD's High RPM Mechanical Governor & Delivery Valve Kits can give you the power and torque you've been looking for. The High RPM Mechanical Governor Kit increases the Cummins engine speed to 3,000 or 4,000 rpm, reducing gear shifting and providing a new high-end horsepower levels. The Delivery Valve Kit yields optimum pump output without replacing plungers and barrels. These kits replace key components in the P7100 Bosch pump on 1994-1998 Dodge-Cummins applications and as such are not for a home install! All modifications must be done by a qualified pump technician otherwise damage could result, excessive heat/smoke could be generated and/or poor performance may occur.

• Designed and engineered to enhance the middle and high end throttle response and enable more power thru the entire throttle range
• Only trained, qualified technicians with working knowledge of P7100 pumps should perform these upgrades
• Designed/Engineered To Enhance Middle/High End Throttle Response
• Only to be Installed by Qualified P7100 Technician
• 12 Month Or 12000 Mile Warranty

This Part Fits:

iDash Data Pro® does what other gauges can't. Monitor, record, set alerts, check diagnostics, and control Banks devices. 300+ parameters available. Control via iDash buttons or intuitive mobile app. The ultimate engine evaluation tool. Offers more data and functionality than instruments 5X the price. Whether you're towing and want to monitor accurate Exhaust Gas or Coolant Temperature, your new supercharger’s Boost Pressure, or Altitude Density as you crest the next grade, the iDash Pro allows you to pick what you want to see, where you want to see it, and how it’s displayed.iDash Data Pro is the ultimate powertrain information center and data recorder. Wirelessly configure, control and update. Compact 52mm package.Key Features:-Customizable gauge display-Bluetooth app for setup and control-Free over-the-air firmware updates-Read Boost Pressure, EGT and so much more-Avoid costly repairs by monitoring important sensors-See more with additional gauges-Display 2-8 Data readings per gauge-Read up to 80 OBDII Mode 01 values-Over 300 parameters available-View Data your dash does not display-Displays accurate values your OEM dash gauges filter-Includes patented OBDII Density (exclusive to Banks)-Adds Data-Logging functionality (incl 4gb micro-SD)-Log up 100 parameters at a time-Log up to 20 min/max values-Connect multiple iDash gauges-Auto-Dimming Feature-Fits standard 52mm (2-1/16 inch) gauge mounts-Features vary by application

• iDash Data Pro is the ultimate powertrain information center and data recorder. Wirelessly configure, control and update. Compact 52mm package.

Connects to your iDash to add 4 Sensor inputs per module. Works with a wide variety of Banks plug and play sensors as well as with your custom analog or resistance sensor. Each channel can be configured to any parameter. The 4-Ch Analog Module Connects to your iDash and add 4 Sensor inputs per module. The system works with a wide variety of Banks plug and play sensors as well as with your custom analog or resistance sensor. Each channel can be configured to any parameter making this a very flexible module. Daisy chain up to 6 Thermocouple Modules and 6 Analog Sensor Modules per system allowing you to add over 48 new sensors to your Banks iDash DataMonster or SuperGauge.Key Features: The 4-Ch Analog Module. Connects to your iDash. Adds 4 Sensor inputs per module. The system works with a wide variety of Banks plug-and-play sensors. Also works with your custom analog or resistance sensor. Each channel can be configured to any parameter making this a very flexible module. Combine with other Banks Sensor Modules to use additional sensors. Daisy chain up to 6 Thermocouple and 6 Analog Sensor Modules per system. Connects inline with Banks Derringer, and other Sensor Modules for easy connectivity.

• Connects inline w/Banks Derringer and other Sensor Modules
• Add 4 Sensor inputs per module

The Banks AutoMind programmer comes ready to run with pre-loaded power right out of the box and right for the job at hand! Its calibrations were developed with power and increased MPG in mind. The AutoMind also provides service technician diagnostic capabilities with its ability to scan and clear vehicle trouble codes. Intense, usable, real horsepower only from Banks! Wrap Your Hand Around Some Serious Power! Introducing the latest in pre-loaded, pre-programmed power from the most trusted name in engineered engine efficiency. Banks is the only record-holding engine builder in the programming game, and now that expertise can be yours! The Banks AutoMind programmer comes ready to run with pre-loaded power right out of the box and right for the job at hand! Its calibrations were developed with power and increased MPG in mind. The AutoMind also provides service technician diagnostic capabilities with its ability to scan and clear vehicle trouble codes. Intense, usable, real horsepower only from Banks! AutoMind 2 Programmer, Hand Held for use with GM Diesel/Gas (except Motorhome)Important Notes: Features vary by application. See description for specific details. This product not intended for use on vehicles that originated as cab-and-chassis vehicles or that were built for use in Mexico. Use of the Banks AutoMind on these vehicles will result in improper running and a partially disabled vehicle.Key Features: Power, Fuel Economy and Performance. Delivers power on demand by removing factory's power delay. Internet updatable. Flexible all-in-one programmer & scan tool. New and improved user interface. Full-color 2.8 inch screen. Adjust or remove engine rev and/or top speed limiter. Speedometer calibration based on tire size and/or gear ratio. Tuned for torque management and shift points/firmness. Control cylinder deactivation features. Read and clear trouble codes. Updatable, Windows 7 (or newer) and Mac OS

• Updatable Windows 7 or newer and Mac OS
• Power, Fuel Economy and Performance

This Part Fits:

PedalMonster is the only OBD-connected torque response controller for gas and diesel vehicles. It’s tuned to eliminate factory torque delay, instantly making your vehicle more fun to drive. Engineered and manufactured in California, PedalMonster fixes dangerous flaws found in every other throttle response controller.Why you need it. PedalMonster improves your vehicle's off-line launch and mid-range punch, nailing you like a cup of black coffee. It makes launching, merging, and passing effortless.How it works. PedalMonster combines your driver input with real-time data from your vehicle's sensors and ECM to speed up torque delivery.How you use it. First, get on the highway and choose from one of 30 Master Torque Response Curves to achieve your desired mid-range punch. Then, return to stop-and-go traffic, and check out your off-the-line launch. Breaking tires loose? Dial it down with one of 5 Launch Trim levels.It's safer. Banks Active Safety® monitors for any faults within the system, returning to stock torque delivery if an issue is detected. This prevents trouble codes, limp mode, and a dead pedal. Additionally, Reverse Safety returns you to stock, preventing unintended acceleration in reverse. No one else has these features.Why it's better-More responsive and predictable torque delivery-Launch Trim optimizes low-speed torque-Uses real-time powertrain data-Uses reliable, fused 12v power-Returns vehicle to stock when reversing-No check engine lights or dead pedalKey Features: 30 Master Torque Response Curves. 5 levels of speed-based Launch Trim. Bi-directional vehicle data via OBD. Reverse Safety®. ActiveSafety® failsafe system. Powered by reliable 12v via OBD. Plug-and-play. Warranty friendly. Does not leave footprint. US Patent 10,933,885 B1

• Wake up your car or truck! Launch, pass and merge effortlessly.
• ActiveSafety Reverse Safety and Adjustable Low Speed Trim

This Part Fits:

Universal fitment designed to allow you to connect two devices to the OBDII port. The plug is a right angle for minimal interference. Most ECMs will only communicate with one diagnostic device at a time. Using a splitter will result in the vehicle’s ECM having to choose between devices. One of your devices will not operate properly.Fitment Note: For use with Banks devices and Retractable Steps. Not intended for use with Banks devices and third-party OBD monitors.

• Connect two devices to the OBDII port

iDash®Stealth Pods are direct-fit gauge mounts that affix to your late 2022-2026 GM 1500's and 2024-2026 2500/3500 factory A-pillar grab handle while concealing wires for a factory look. Each pod securely mounts to the body of the truck while being angled to enhance gauge viewing and ergonomics. Proudly made in the USA from industrial-grade polymer, iDash Stealth Pods can be installed in minutes, and are built to last the life of your truck through hot summer days or cold winter nights. Each Stealth Pod ships in a natural black finish and can be painted by you to color-match your interior. Vehicle-specific grab handle mount designed to work with the low profile nature of the iDash. Ergonomically designed with an optimized viewing angle that is closer to the driver for enhanced visibility. Stealth Pods hide wiring for a clean install and can be painted to match OEM interior colors. NOTE: iDash Gauge not included. Fitment for non iDash gauges is not guaranteed.Key Features: Designed for Banks iDash. Optimized gauge face orientation. Retains Factory Grab Handle. OE Grade Polyamide-12 construction, durable to last life of truck.

• Retains factory grab handle

This Part Fits:

K-Type Thermocouple with 1/8 NPT compression fitting. Plug and Play with Banks 4-CH thermocouple Module. Adjustable insertion depth of up to 7/8". 6ft 5in cable length. 0-1650 deg F temperature range.Key Features: K-Type Thermocouple. 1/8 NPT compression fitting. Suitable for EGT or other temperature readings. Plug and Play with Banks 4-CH thermocouple Module. Adjustable insertion depth of up to 7/8". 6ft 5in cable length. 0-1650 deg F temperature range.

• 0-1650 deg F for EGT or other temperatures
• 0-1650 deg F temperature range

Huge 2.5-inch stainless mandrel-bent tailpipe with Straight-thru Monster muffler. Flows up to 108 Percent better than stock. No tip included.Huge 2.5 inch stainless mandrel-bent tailpipe. Straight-thru Monster muffler flows up to 108% better than stock. Slashes backpressure. Throaty sound. Constructed of heavy-gauge stainless steel, Banks Monster features a supersized, 2.5 inch tailpipe. Banks Monster muffler, its straight-through performance muffler, is the industry's least restrictive. In comparison tests, Banks muffler flowed 543.2 cfm at 1 psi - a 108% improvement over the stock exhaust's 260.0 cfm. Monster virtually eliminates backpressure from the catalytic converter back, for more power and efficiency - and an authoritative, yet civil, exhaust note. For maximum results, combine with a Banks exhaust manifold available for 1991-2001 Cherokees. Includes: Stainless Monster muffler, Stainless 2.5 inch tailpipe, Mounting hardware.Key Features: Mandrel bent Stainless Steel construction. Virtually eliminates backpressure. Lowers exhaust gas temps. Dramatically improves flow. Maximum Airflow. Huge 2.5 inch stainless mandrel-bent tailpipe. Straight-thru Monster muffler. Flows up to 108% better than stock. No tip included

• Flows up to 108 Percent better than stock
• No tip included

This Part Fits:

Huge 2.5-inch stainless mandrel-bent with Straight-thru Monster muffler. Flows up to 140 Percent better than stock. Includes Chrome or Cerakote Black tip. Cat outlet slip fit. Huge 2.5 inch stainless mandrel-bent tailpipe with a polished or Black tip. Straight-thru Monster muffler flows up to 140 percent better than stock. Slashes backpressure; throaty sound. Constructed of heavy-gauge stainless steel, Banks Monster features a supersized, 2.5 inch tailpipe with a stainless tailpipe tip polished to a mirror finish. Banks Monster muffler, its straight-through performance muffler, is the industry's least restrictive. In comparison tests, Banks muffler flowed 501.2 cfm at 1 psi - a 140 percent improvement over the stock exhaust's 208.6 cfm, and about 44 percent better than the nearest competitor. Monster virtually eliminates backpressure from the catalytic converter back, for more power and efficiency - and an authoritative, yet civil, exhaust note. For maximum results, combine with Banks TorqueTube system. Includes: Stainless Monster muffler; Stainless 2.5 inch tailpipe; Stainless tailpipe tip in polished Chrome or black; Mounting hardware.Key Features: Mandrel bent Stainless Steel construction. Virtually eliminates backpressure. Lowers exhaust gas temps. Dramatically improves flow. Maximum Airflow. Huge 2.5 inch stainless mandrel-bent. Straight-thru Monster muffler. Flows up to 140% better than stock. Includes CERAKOTE Black tip. Cat outlet slip fit

• Flows up to 140% better than stock!
• Includes Cerakote Black Tip

This Part Fits: