Fits select 1962-1987 Ford, Mercury, Lincoln, AC, and DeTomaso vehicles (5.0L).

Seal your engine reliably with this Fel-Pro engine valve cover gasket set, specifically engineered for the real-world repair environment. Recognizing that vintage and high-mileage engines often have less-than-perfect sealing surfaces, Fel-Pro utilizes a proprietary cork-rubber formulation. This material is highly conformable, allowing it to compress and fill in minor surface irregularities, pits, or warping on the cylinder head and valve cover rails to prevent oil leaks.

This set is real-world tested on-vehicle to ensure precise fitment and optimal performance under thermal cycling. As a complete solution for the repair, it includes the necessary components to restore a professional-grade seal during your next top-end service.

• Part Number: VS13264R
• Material: Proprietary cork-rubber formulation
• Design: Engineered for imperfect sealing surfaces and older engine blocks
• Testing: Validated on-vehicle for real-world reliability
• Application: Replaces worn or leaking OE gaskets to stop oil loss and mess

The Fel-Pro 17950 Marine Engine Oil Pan Gasket Set is engineered specifically for the demanding repair environment where sealing surfaces may no longer be perfectly flat. This multi-piece gasket set provides a reliable seal for marine applications, utilizing proprietary materials designed to withstand the rigors of engine operation while compensating for surface imperfections that often cause leaks with standard gaskets.

• Precision Engineering: Designed to meet or exceed all original equipment specifications for a precise fit and reliable performance.
• Complete Kit: Includes all necessary components required to complete a full oil pan gasket replacement.
• Marine Optimized: Specifically formulated for marine engine environments to prevent oil leaks and ensure long-term durability.
• Technical Specs: Features an 18-bolt hole configuration and multi-piece construction.
• Manufacturer Part Number: 17950

Fits select 2013-2020 Scion FR-S, Subaru BRZ, and Toyota 86 models.

The Exedy Stage 1 Organic Racing Clutch (15806) is engineered for drivers who need increased torque capacity for modified engines without sacrificing the smooth engagement required for daily driving. Utilizing premium organic friction materials, this clutch kit provides superior resistance to slippage and burst compared to standard components, making it an ideal upgrade for street use and light-horsepower track sessions.

By increasing the clamp load over the factory pressure plate, Exedy ensures your drivetrain can handle the output of tuned engines. The clutch disc features a sprung center damper design specifically integrated to absorb drivetrain shock and protect your transmission during aggressive shifts, while maintaining a pedal feel similar to the stock assembly.

• Increased clamp load for higher torque capacity
• Premium organic friction material for heat resistance and durability
• Sprung center hub reduces drivetrain shock and vibration
• Street-friendly drivability with smooth engagement
• Ideal for naturally aspirated and light-horsepower modifications
• Manufacturer Part Number: 15806

Fits 2015-2023 Ford Mustang models, including EcoBoost, V6, GT, Bullitt, Mach 1, and Shelby GT350/GT500 (2.3L / 3.7L / 5.0L).

The Eibach Sportline-Plus Kit is the ultimate suspension tuning package for the S550 and S650 Mustang enthusiast. By combining Eibach's aggressive Sportline lowering springs with the precision-engineered Anti-Roll-Kit sway bars, this system provides a complete handling overhaul. This combination significantly lowers the vehicle's center of gravity, drastically reduces body roll during cornering, and minimizes nose-dive under hard braking and rear-end squat during acceleration.

Every component is engineered to work in harmony, utilizing high-tensile strength spring steel and cold-formed, solid steel sway bars for consistent performance. The result is a Mustang that tracks flatter through corners with increased steering response and a more aggressive stance. This kit is a direct bolt-on installation that utilizes factory mounting points and requires no permanent vehicle modifications.

• Includes Sportline lowering springs and Anti-Roll-Kit sway bars
• Reduced body roll and improved turn-in response
• Lowered center of gravity for superior balance and stability
• Engineered for use with original equipment (OE) dampers or performance shocks
• Direct bolt-on fitment for select 2015-2023 Mustang models
• Manufacturer Part Number: 4.14535.880

Fits select 2007-2020 Chevrolet Suburban 1500 and Tahoe models (5.3L V8).

Eibach Pro-Lift-Kit springs are precision-engineered to provide a 2.5-inch suspension lift for your SUV without the compromises of coilover swaps or spacer kits. By replacing the factory front springs, these units allow for a full range of suspension travel, maintaining proper geometry to minimize stress on your control arm bushings and ball joints. This kit provides the necessary fender clearance for larger wheel and tire packages while improving overall ground clearance for off-road obstacles.

Manufactured in the USA, these springs are designed to offer excellent on-road stability and predictable handling characteristics whether you are commuting or hitting the trail.

• Provides 2.5 inches of front lift height
• Compatible with factory shocks or Eibach Pro-Truck Sport shocks
• Maintains suspension travel and reduces stress on drivetrain components
• Increases ground clearance and allows for larger tire fitment
• Made in the USA
• Manufacturer Part Number: E30-23-030-01-20
• Includes: Pair of front lift springs

Fits 2024-2026 Toyota Land Cruiser 1958, Base, and First Edition models (2.4L).

The Eibach PRO-TRUCK Sport rear shock absorber is engineered to provide superior damping and vehicle control for the latest generation Toyota Land Cruiser. Utilizing a high-pressure monotube design, these shocks are built to handle both daily street driving and technical off-road terrain. The large-diameter 46mm piston delivers consistent performance by reducing fluid aeration, while the nitro-coated shaft ensures long-term durability under harsh conditions.

Designed as a direct replacement for the factory rear units, these shocks feature weather-resistant zinc-coated bodies and can accommodate rear lift heights from 0 to 1.5 inches. Whether you are correcting the ride quality of a stock SUV or outfitting a rig for overland use, the PRO-TRUCK Sport series provides the necessary damping stability to manage added cargo and challenging trails.

• Monotube high-pressure design for maximum fade resistance
• Heavy-duty 46mm piston for precise damping control
• Nitro-coated shaft and zinc-coated weather-resistant shock body
• Accommodates 0" to 1.5" of rear lift
• Direct fitment to factory mounting points
• Made in the U.S.A.
• Manufacturer Part Number: E60-82-108-01-01

Fits 2024-2026 Toyota Land Cruiser 1958, Base, and First Edition (2.4L).

The Eibach HD Rear Pro Lift Kit is engineered for Land Cruiser owners who require additional support for heavy rear-axle loads without the complexity of air bags or the compromise of spring spacers. These heavy-duty springs serve as a direct-fit replacement for standard lift springs, providing the necessary rate to maintain a level ride height when the vehicle is equipped with aftermarket bumpers, tire carriers, or overland gear.

• Precision-engineered for improved off-road capability and increased ground clearance.
• Provides additional fender clearance for larger wheel and tire combinations.
• Enhanced on-road stability and predictable handling under load.
• Manufactured by Eibach in the U.S.A.
• Manufacturer Part Number: E30-82-108-02-02

Fits select 2019-2026 Chevrolet Silverado 1500, Silverado 1500 LTD, GMC Sierra 1500, and Sierra 1500 Limited (5.3L).

Eibach Pro-Lift-Kit front springs are designed to provide a suspension lift for your truck without the mechanical compromises of spacer lifts or the complexity of full coilover systems. These springs allow for a full range of suspension travel, preventing the premature wear on bushings and ball joints commonly associated with spacer blocks.

By increasing front-end height, this kit provides additional ground clearance and the fender room needed for larger wheel and tire combinations. Precision-engineered for the 5.3L V8 platform, these springs improve off-road capability while maintaining excellent on-road stability and predictable handling characteristics.

• Precision engineered for improved off-road capability and ground clearance
• Provides additional fender clearance for larger wheel and tire packages
• Maintains full suspension travel and factory geometry
• Excellent on-road stability and handling
• Manufactured in the USA
• Manufacturer Part Number: E30-23-032-01-20

Fine-tune your vehicle's handling dynamics with the Eibach ERS (Eibach Race Spring) system. This 10.00-inch coil-over spring is engineered for precision performance across diverse racing and off-road applications, designed to provide maximum travel while maintaining a minimal block height. This specialized construction allows for more suspension stroke without the risk of coil bind during aggressive cycling.

Each spring is manufactured from high-tensile strength wire to ensure the highest linearity and guaranteed consistency in spring rate. To maintain professional-grade standards, Eibach individually tests every spring to verify it meets strict tolerances, providing the predictable response required for shocks and pull-bars. The legendary durability of the ERS line ensures it withstands the rigors of competition while maintaining its height and rate over time.

• Manufacturer Part Number: 1000.250.0200S
• Inside Diameter (ID): 2.50 in.
• Length: 10.00 in.
• Spring Rate: 200 lbs/in
• Construction: High-tensile strength steel for maximum travel
• Testing: Individually tested for rate and linearity
• Design: Maximum travel in combination with smallest block heights

Eibach Race Springs (ERS) provide the precision and customization required for professional racing and demanding off-road applications. This 20-inch length coil-over spring is engineered to maintain high linearity and consistency, ensuring predictable handling dynamics under extreme loads.

Designed with a 3.75-inch inside diameter, these springs are built to achieve maximum travel in combination with the smallest possible block heights to prevent coil bind. Every Eibach spring is individually tested and rated to ensure it meets strict performance tolerances for shocks, pull-bars, and other specialized suspension setups.

• Series: Eibach Race Springs (ERS)
• Inside Diameter: 3.75 in
• Free Length: 20.00 in
• Spring Rate: 300 lbs/in
• Construction: High-durability racing steel
• Tested: Individually tested for linearity and consistency
• MPN: 2000.375.0300S

Fits select 2020-2026 Subaru Outback, Legacy, WRX, Crosstrek, and Impreza.

The EBC Brakes S13 Yellowstuff Brake Pad and RK Rotor Kit is a high-efficiency sport upgrade engineered for high-horsepower street cars, SUVs, and trucks under heavy load. This kit pairs EBC Yellowstuff high-friction pads with RK-series premium replacement rotors to provide a massive increase in stopping power and thermal capacity over stock components.

The included RK rotors are precision-cast from G3000 iron and feature a cross-ground surface finish for rapid pad seating. To ensure long-lasting performance and aesthetics, the rotors are finished with a thermic black Geomet anti-rust coating. Every rotor is balanced and inspected for run-out, ensuring a smooth, vibration-free installation that bolts directly to factory mounting points with no modifications required.

• High-Friction Pads: Yellowstuff compound handles high heat, ideal for spirited driving and towing.
• Premium Rotors: RK-series non-slotted OE-style rotors cast from G3000 grade iron.
• Corrosion Protection: Full thermic black coating for maximum resistance against road salt and moisture.
• Direct Fit: Replaces factory hardware with an exact-fit design for easy installation.
• Warranty: Backed by a 10,000-mile manufacturer no-hassle warranty.
• Part Number: S13KF2259

Fits select 2012-2022 Dodge Durango SRT/SRT 392 and Jeep Grand Cherokee SRT/SRT8.

This EBC Racing front brake kit combines SG-series two-piece floating rotors with high-friction Bluestuff NDX pads to provide a significant performance upgrade for heavy, high-horsepower SUVs. Designed to withstand the intense thermal loads of aggressive street driving and track applications, the floating rotor design allows for independent expansion of the outer ring, reducing stress and preventing rotor warping under extreme heat.

The Bluestuff NDX pads provide a consistent friction profile that performs well from cold, making them suitable for both spirited daily driving and competitive track sessions. This combination ensures maximum longevity and stopping power where factory components often struggle with heat soak and fade.

• Complete front axle kit: SG floating rotors and Bluestuff NDX pads
• High-friction material maintains performance during aggressive track use
• Two-piece floating rotor design improves thermal management
• Direct bolt-on replacement for factory front brakes
• Manufacturer Part Number: S27KF1029

Fits select 2003-2023 Acura NSX, Aston Martin, Audi R8, Ford GT, Jaguar, Lamborghini, and Tesla Model S/X.

DFC 5000 Advanced Low Metallic Parking Brake Pads are specifically engineered for modern luxury and performance vehicles equipped with advanced ABS and automated electronic parking brake (EPB) systems. These pads use axle-specific low-metallic friction formulations to deliver a consistent pedal feel and immediate response for secure static holding and emergency braking.

Constructed with rotor-friendly materials, these pads balance high friction stability with long-term durability. Each pad is designed to meet or exceed the performance of OE formulations, ensuring seamless integration with your vehicle's factory braking hardware.

• Precision Engineering: Formulated to meet the demands of vehicles with complex automated braking systems.
• Low Metallic Compound: Delivers superior braking response while protecting rotors from excessive wear.
• Consistent Performance: Provides a predictable, secure hold across a wide range of temperatures.
• Application-Specific: Designed as a direct replacement for factory parking brake pads.
• Manufacturer Part Number: 1551-0971-00

Fits select 2005-2016 Ford F-250 and F-350 Super Duty 4x4 models.

This Carli 2.0-inch IFP shock package is precision-tuned specifically for the front-end weight of 2005-2016 Ford diesel trucks. Optimized for use with Carli 2.5-inch leveling springs, these shocks provide a significant upgrade for on-road comfort, highway stability, and towing performance. The corrosion-resistant 2.0 aluminum bodies ensure long-lasting durability and superior heat dissipation compared to standard steel shock bodies.

The system is valved to work effectively with either the factory rear leaf springs or the Carli Progressive Add-a-Pack. By increasing suspension travel to 9 inches in the front and 12.3 inches in the rear, this kit enhances the truck's ability to absorb large impacts while maintaining a controlled, smooth ride during daily commuting. The included front bump stop drops ensure proper clearance and prevent over-compression of the front suspension components.

• Manufacturer Part Number: CS-FLVLSPKG-CS20IFP-B
• Shock Type: 2.0" Internal Floating Piston (IFP)
• Construction: Corrosion-resistant aluminum bodies
• Front Travel: 9"
• Rear Travel: 12.3"
• Lift Height Compatibility: 2.5" Front Leveling
• Included Components: Front and rear shocks, front bump stop drops (CS-FBDF05-25)

Fits select 2011-2016 Ford F-250 and F-350 Super Duty 4x4 (King Ranch, Lariat, Platinum, XL, XLT).

Carli full-length progressive rate leaf springs are engineered to provide a significant upgrade over the harsh factory ride quality. Manufactured by Deaver Spring to Carli’s rigid specifications, these two-stage packs replace the entire factory leaf assembly and lift block to eliminate the stiff rebound and axle wrap common in stock Super Duty configurations.

This 1-inch lift kit utilizes a higher leaf count with thinner spring steel, allowing the pack to move more fluidly over small bumps while maintaining the necessary support for heavy cargo. By removing the factory block, you achieve a more stable rear end and improved suspension travel, making this an essential upgrade for both highway comfort and off-road performance.

• Provides 1-inch of rear lift while eliminating the factory block
• Two-stage progressive rate design for a plush ride without sacrificing cargo stability
• Custom-built by Deaver Spring specifically for Carli Suspension
• Complete kit includes heavy-duty U-bolts and a bump stop drop kit
• Direct bolt-on installation to factory mounting points
• Manufacturer Part Number: CS-FFSP-LVL-11

Fits 2005-2007 Ford F-250 and F-350 Super Duty models equipped with the Diesel engine.

The Carli Pintop Leveling System is engineered for drivers seeking a significant improvement in both on-road ride quality and off-road capability. At the core of this system are King 2.5-inch Remote Reservoir Shocks, which are custom-tuned in-house by Carli to provide superior damping control over stock components. This setup increases wheel travel to 9 inches in the front and 13 inches in the rear, allowing the suspension to track smoothly over rough terrain while maintaining highway stability.

This comprehensive kit replaces the factory front coils with linear rate springs and includes an adjustable track bar to properly center the axle after lifting. To maintain correct suspension geometry and prevent component binding, the system features brake line extensions, bump stop drops, and caster correction shims. This configuration provides sufficient clearance to run up to 37-inch tires.

• King 2.5" Remote Reservoir Shocks (Front and Rear)
• Linear Rate Coil Springs
• Adjustable Track Bar
• Caster Correction Shims
• Extended Brake Line Kit
• Bump Stop Drop Spacers
• 9" Front / 13" Rear Wheel Travel
• Clears up to 37" tires
• Manufacturer Part Number: CS-FLVL-PT25-05

Fits 2014-2023 Ram 2500 Diesel models equipped with factory rear air suspension and a 3.25-inch lift.

The Carli Pintop 2.5 shock system is engineered to provide a dramatic increase in suspension travel and ride quality for heavy-duty platforms. These shocks utilize a 2.5-inch diameter body, providing 55% more piston surface area than standard 2.0-inch shocks. This increased volume, combined with Carli’s proprietary blueprinted valving and a 5-port piston design, allows for superior oil flow management and heat dissipation during aggressive off-road use or demanding towing conditions.

Constructed for longevity in harsh environments, these shocks feature shafts machined from solid 17-4 stainless steel, polished to a mirror finish to protect seals and ensure smooth operation. The front King 2.5 shocks use remote reservoirs for maximum cooling, while the rear shocks utilize a piggyback reservoir configuration specifically designed for the Ram 2500 chassis.

• Manufacturer Part Number: CS-DPT25SPKG-1419-D-AR
• Front Shocks: King 2.5-inch remote reservoir with custom Carli valving
• Rear Shocks: King 2.5-inch piggyback reservoir with custom Carli valving
• Shaft Material: 17-4 stainless steel for maximum corrosion resistance
• Piston Design: Proprietary Carli 5-port high-flow piston
• Compatibility: Exclusively for 2014-2023 Ram 2500 Diesel with factory Rear Air Suspension
• Included Hardware: Front and rear shock assemblies, emergency brake cable brackets

Fits 2011-2016 Ford F-250 and F-350 Super Duty models (King Ranch, Lariat, Platinum, XL, and XLT).

The Carli Backcountry Leveling System is engineered for drivers who demand superior ride quality on both pavement and rough terrain. By replacing the stiff factory setup with linear-rate coil springs and custom-tuned shocks, this system transforms the Super Duty's handling characteristics, allowing for controlled high-speed travel on gravel roads while maintaining daily-driver comfort on the highway. The 2.0-inch remote reservoir shocks feature corrosion-resistant aluminum bodies to dissipate heat effectively and ensure a long-lasting finish in harsh environments.

This comprehensive kit provides a significant increase in suspension capability, boosting wheel travel to 9 inches in the front and 13.8 inches in the rear. It includes all necessary geometry correction hardware, such as an adjustable track bar to center the axle and caster correction shims to maintain proper steering feel after lifting.

• Linear Rate Coil Springs: Delivers a predictable, smooth spring rate throughout the suspension cycle.
• Carli-Tuned 2.0 Shocks: Remote reservoir design with aluminum bodies for maximum cooling and performance.
• Adjustable Track Bar: Essential for re-centering the front axle and improving lateral stability.
• Caster Correction Shims: Restores factory steering geometry for better tracking and less wander.
• Hardware Included: Stainless brake line kit, bump stop drops, and all required mounting components.
• Tire Clearance: Fits up to 37-inch tires for increased ground clearance.
• MPN: CS-FLVL-BC-CS-11

Fits 2019-2023 Ram 3500 trucks (SRW) equipped with 4.25-inch axle tubes.

This Carli Suspension rear lift kit provides 1 inch of additional height to the rear of your Ram 3500, making it an ideal pairing for 2.5-inch front leveling systems. These kits are specifically engineered for drivers who want to restore a slight rake or maintain a level stance when hauling or towing. The kit utilizes high-strength billet aluminum blocks that provide a stable, precise mounting surface for the leaf pack, ensuring proper axle alignment and durability under heavy loads.

• Provides 1" of rear lift for a balanced vehicle profile
• CNC-machined billet aluminum blocks for superior strength and fitment
• Includes heavy-duty U-bolts sized specifically for 4.25" diameter axle tubes
• Designed to complement 2.5" front leveling kits
• Fits Single Rear Wheel (SRW) models only
• Manufacturer Part Number: CS-DRBKIT-1-425

Note: This kit is not compatible with trucks equipped with Factory Air Assist or Dual Rear Wheel (DRW) configurations.

Fits 2014-2023 Ram 2500 models equipped with factory rear air suspension.

When installing a leveling kit on a Ram 2500 with factory air suspension, the original equipment (OE) sensor links are often too short to maintain correct system geometry. These Carli Suspension Extended Ride Height Sensor Links are designed to bridge that gap, ensuring the truck's computer receives accurate data regarding the vehicle's stance. By extending the linkage, you prevent the sensor from over-extending, which avoids error codes and maintains the factory-commanded ride quality after the front end is raised.

• Corrects air suspension sensor geometry for leveled applications
• Maintains full functionality of the factory rear air ride system
• Direct bolt-on replacement for short factory sensor links
• Engineered for 2014-2023 Ram 2500 4WD platforms
• Manufacturer Part Number: CS-DAR-14-LVL-LINK

Fits select 2017-2026 Ford F-250 and F-350 Super Duty 4x4 models (Diesel with 3.5"-4.0" axle tubes).

Carli Suspension collaborated with Deaver Spring Inc. to engineer this full progressive leaf spring pack, specifically designed for 2017-2026 Ford Super Duty trucks equipped with 4.5-inch to 5.5-inch suspension systems. Unlike factory leaf stacks that rely on thick, rigid leaves and lift blocks, this kit replaces the entire factory assembly to eliminate the block and provide a significantly more predictable, supple ride. The progressive rate design allows the suspension to track better over small chatter while maintaining the stability needed for heavier cycles.

• Performance Stance: Provides 3 inches of lift at the spring, resulting in a 1-inch rear-high stance when paired with Carli 4.5-inch or 5.5-inch systems.
• Block Elimination: Replaces factory lift blocks to reduce axle wrap and improve geometry.
• Tire Clearance: Engineered to provide sufficient clearance for up to 37-inch tires.
• Load Capacity: Maintains "light" 3/4-ton cargo/tow capacity; long-travel airbags are recommended to restore full payload capacity.
• Complete Hardware: Includes new U-bolts and rear bump stop drops for a complete installation.
• Manufacturer Part Number: CS-FFSP-17

Fits 2005-2007 Ford F250 and F350 4x4 Super Duty trucks equipped with the Diesel engine.

The Carli Commuter System is engineered specifically for drivers who spend the majority of their time on the pavement but demand a significant upgrade over the harsh factory ride. This 2.5-inch leveling system eliminates the nose-down rake of the Super Duty while drastically improving small-bump compliance and high-speed stability. By replacing the stiff OE front springs and shocks with components tuned for the weight of the Power Stroke engine, this system provides a refined, controlled feel across highway expansion joints and rough surface streets.

• Custom-Tuned Fox 2.0 Shocks: Includes four Fox 2.0-inch internal reservoir shocks with custom valving developed by Carli for the specific spring rates and vehicle weight.
• Linear Rate Coil Springs: Front coil springs designed for a more compliant initial stroke without sacrificing bottom-out resistance.
• Precise Fitment: Designed to bolt directly into factory mounting locations for 4x4 diesel models.
• Ride Quality: Optimized for daily commuting and light off-road use while maintaining full towing and hauling capacity.
• MPN: CS-FLVL-COM-CS-05

Fits select 2005-2007 Ford F-250 and F-350 Super Duty models.

The Carli Backcountry Leveling System is engineered for drivers who demand a significant improvement in ride quality both on-road and in high-speed dirt environments. This system replaces the factory front coils with linear rate springs and upgrades the damping with Carli-tuned 2.0 remote reservoir shocks. These shocks feature corrosion-resistant aluminum bodies that dissipate heat much faster than steel, ensuring consistent performance during long stretches on gravel roads or washboard terrain.

By increasing wheel travel to 9 inches in the front and 13.8 inches in the rear, this kit provides the compliance needed to soak up large impacts while maintaining a controlled highway feel. The inclusion of an adjustable track bar and caster correction shims ensures your axle remains centered and your steering geometry is restored to factory-like precision after lifting.

• Manufacturer Part Number: CS-FLVL-BC-CS-05
• 2.5/3.5-inch lift height (vehicle dependent)
• Carli-Tuned 2.0 remote reservoir shocks with aluminum bodies
• Linear rate coil springs for predictable handling
• Includes adjustable track bar and caster correction shims
• Includes extended brake lines and bump stop drops
• 9" front and 13.8" rear wheel travel
• Clears up to 37" tires

Fits 2017-2023 Ford F-250 and F-350 Super Duty (King Ranch, Lariat, Limited, Platinum, XL, XLT).

The Carli Dominator 3.0 Shock Package is the ultimate damping solution for the 2017-2023 Ford Super Duty equipped with a 4.5-inch or 5.5-inch lift. This system replaces standard shocks with massive 3.0-inch diameter shock bodies, providing the oil volume and surface area necessary to dissipate heat during aggressive off-road use and sustained high-speed driving. By moving to a larger bore, this package delivers significantly more control and bottom-out resistance compared to smaller 2.0 or 2.5 series shocks.

Each shock is custom-valved specifically for the Super Duty chassis to eliminate the harshness often associated with heavy-duty trucks. The remote reservoir design ensures consistent performance by keeping the shock oil cool and preventing cavitation, even when navigating washboard roads or technical terrain. This package provides a transformative increase in ride quality without sacrificing the truck's ability to tow and haul.

• Specifically engineered for 2017-2023 Ford F-250/F-350 Super Duty 4WD models
• Validated for suspension systems with 4.5" or 5.5" of lift height
• 3.0" shock bodies for maximum thermal capacity and damping force
• Remote reservoirs increase oil volume for fade-free performance
• Custom Carli internal valving for superior ride quality and control
• Includes all necessary mounting hardware for the shock upgrade
• Manufacturer Part Number: CS-FD30SPKG-45-1723

Fits select 2017-2026 Ford F-250 and F-350 Super Duty 4x4 models (Diesel with 3.5-inch to 4-inch axle tubes).

Engineered in collaboration with Deaver Spring Inc., this Carli Suspension progressive leaf spring pack is specifically tuned to improve the ride quality and articulation of your Super Duty. By replacing the stiff factory main leaf and overload springs with a multi-leaf progressive design, this kit eliminates the harsh rebound characteristics often felt when the bed is empty. This system produces approximately 1 inch of lift and is designed to eliminate the factory rear blocks for a more stable and predictable suspension feel, especially when paired with Carli 2.5-inch or 4.5-inch suspension systems.

• Progressive multi-leaf design for enhanced small-bump compliance and off-road articulation
• Delivers up to 15 inches of suspension travel
• Removes factory lift blocks to reduce axle wrap and improve stability
• Specifically tailored for Diesel models with 3.5-inch to 4-inch axle tubes
• Includes heavy-duty U-bolts and rear bump stop drops
• Manufacturer Part Number: CS-FFSP-LVL-17

Fits 2017+ Ford F-250 and F-350 Super Duty 4WD trucks.

Carli Suspension extended front sway bar end links are engineered to correct sway bar geometry on leveled or lifted trucks. When a vehicle's ride height is increased, the factory end links often become too short, pulling the sway bar out of its optimal operating plane and potentially causing binding or contact with other suspension components. These extended links restore the sway bar to a neutral position, ensuring the anti-sway system functions correctly without interference.

Built as a heavy-duty replacement for the factory units, these links provide the necessary clearance for aftermarket suspension cycles. They bolt directly into the factory mounting locations, making them a straightforward upgrade for owners looking to maintain predictable handling and ride quality after a height adjustment.

• Corrects sway bar operating angle on leveled or lifted applications
• Prevents sway bar binding and component interference
• Heavy-duty construction for improved durability over OEM links
• Direct bolt-on installation with included hardware
• Manufacturer Part Number: CS-FEL-17

Fits select 1979-2004 Ford Mustang models including GT, LX, and SVT Cobra with the 8.8-inch rear differential.

Minimize deflection and eliminate the binding inherent in factory rubber bushings with the BMR Suspension BK074 Differential Spherical Bearing Kit. These bearings replace the soft OEM bushings where the upper control arms connect to the differential housing. By replacing compliant rubber with a solid spherical pivot, you achieve significantly reduced wheel hop, more consistent launches, and improved predictable handling during high-speed cornering.

Constructed for high-horsepower applications, each kit features housings CNC-machined from 6061-T6 billet aluminum. The heavy-duty Teflon-lined spherical bearings are self-lubricating for quiet operation and a long service life. The assembly is finished in black anodizing for corrosion resistance and includes CNC-machined aluminum spacers to ensure a precise, bolt-on fit for your upper control arms.

• Replaces factory differential housing bushings (MPN: BK074)
• Eliminates deflection for better traction and handling
• CNC-machined 6061-T6 billet aluminum housings
• Heavy-duty Teflon-lined spherical bearings
• Black anodized finish for durability
• Includes all necessary CNC-machined spacers

Fits 2005-2013 Chevrolet Corvette (Base, Grand Sport, Z06, ZR1, 427, and Z06 Carbon).

The BMR Suspension Polyurethane Transmission/Differential Mount (TM560R) is engineered to replace the compliant factory rubber mounts that allow for excessive drivetrain movement. By utilizing high-durometer polyurethane, this mount significantly reduces transmission deflection. This reduction in movement leads to sharper throttle response, faster reaction times, and more precise gear engagement, especially under the high torque loads seen in drag racing and high-performance street applications.

Designed for durability and performance, this mount replaces the worn or soft OE bushing to provide a more stable drivetrain platform without the extreme vibration associated with solid metal mounts. It is a direct bolt-on solution that installs into the factory mounting locations.

• Reduces transmission and differential deflection for improved power delivery
• Enhances shifting precision and throttle response
• High-durometer polyurethane construction with a red finish
• Ideal for drag racing, handling, and street performance applications
• Direct replacement for OE mounts
• Manufacturer Part Number: TM560R

Fits 2016-2021 Honda Civic Coupe and Sedan models, including Base and Si trims (Excludes Type-R).

BLOX Racing Lowering Springs are engineered to enhance your vehicle's handling performance and aesthetic by lowering its center of gravity. These springs reduce body roll during hard cornering and minimize nose-dive under heavy braking, delivering a more precise and responsive driving experience. Designed to work with factory struts, they offer a significant upgrade in stance and control while maintaining the ride quality necessary for a daily-driven street car.

• Improves cornering response and overall stability
• Reduces fender well gap for an aggressive stance
• Wound from high-quality materials for consistent spring rates
• Direct fit for 2016-2021 Honda Civic Coupe and Sedan (Base and Si)
• Manufacturer Part Number: BXSS-01006

The BLOX Racing Shorty Performance Air Filter Kit is engineered for high-performance applications where engine bay space is at a premium. This compact induction solution combines a high-flow 5-inch "Shorty" air filter with a precision-machined 2.5-inch velocity stack to optimize intake air velocity and volume.

By smoothing the transition of air entering the intake tract, the included velocity stack reduces turbulence and intake restriction, allowing for more consistent airflow into the engine. The kit comes complete with a durable silicone coupler and necessary hardware for a secure, leak-free installation. This setup is ideal for custom forced induction or naturally aspirated builds requiring a high-efficiency filtration system in a condensed footprint.

• Manufacturer Part Number: BXIM-00321
• Filter Specification: 5-inch Shorty high-flow element
• Velocity Stack Size: 2.5-inch inlet
• Kit Components: Includes air filter, velocity stack, silicone coupler, and clamps
• Application: Designed for tight clearances in performance intake systems