Fits select 2017-2026 Ford F-250 and F-350 Super Duty 4x4 models (Diesel with 3.5"-4.0" axle tubes).

Carli Suspension collaborated with Deaver Spring Inc. to engineer this full progressive leaf spring pack, specifically designed for 2017-2026 Ford Super Duty trucks equipped with 4.5-inch to 5.5-inch suspension systems. Unlike factory leaf stacks that rely on thick, rigid leaves and lift blocks, this kit replaces the entire factory assembly to eliminate the block and provide a significantly more predictable, supple ride. The progressive rate design allows the suspension to track better over small chatter while maintaining the stability needed for heavier cycles.

• Performance Stance: Provides 3 inches of lift at the spring, resulting in a 1-inch rear-high stance when paired with Carli 4.5-inch or 5.5-inch systems.
• Block Elimination: Replaces factory lift blocks to reduce axle wrap and improve geometry.
• Tire Clearance: Engineered to provide sufficient clearance for up to 37-inch tires.
• Load Capacity: Maintains "light" 3/4-ton cargo/tow capacity; long-travel airbags are recommended to restore full payload capacity.
• Complete Hardware: Includes new U-bolts and rear bump stop drops for a complete installation.
• Manufacturer Part Number: CS-FFSP-17

Fits 2005-2007 Ford F250 and F350 4x4 Super Duty trucks equipped with the Diesel engine.

The Carli Commuter System is engineered specifically for drivers who spend the majority of their time on the pavement but demand a significant upgrade over the harsh factory ride. This 2.5-inch leveling system eliminates the nose-down rake of the Super Duty while drastically improving small-bump compliance and high-speed stability. By replacing the stiff OE front springs and shocks with components tuned for the weight of the Power Stroke engine, this system provides a refined, controlled feel across highway expansion joints and rough surface streets.

• Custom-Tuned Fox 2.0 Shocks: Includes four Fox 2.0-inch internal reservoir shocks with custom valving developed by Carli for the specific spring rates and vehicle weight.
• Linear Rate Coil Springs: Front coil springs designed for a more compliant initial stroke without sacrificing bottom-out resistance.
• Precise Fitment: Designed to bolt directly into factory mounting locations for 4x4 diesel models.
• Ride Quality: Optimized for daily commuting and light off-road use while maintaining full towing and hauling capacity.
• MPN: CS-FLVL-COM-CS-05

Fits select 2005-2007 Ford F-250 and F-350 Super Duty models.

The Carli Backcountry Leveling System is engineered for drivers who demand a significant improvement in ride quality both on-road and in high-speed dirt environments. This system replaces the factory front coils with linear rate springs and upgrades the damping with Carli-tuned 2.0 remote reservoir shocks. These shocks feature corrosion-resistant aluminum bodies that dissipate heat much faster than steel, ensuring consistent performance during long stretches on gravel roads or washboard terrain.

By increasing wheel travel to 9 inches in the front and 13.8 inches in the rear, this kit provides the compliance needed to soak up large impacts while maintaining a controlled highway feel. The inclusion of an adjustable track bar and caster correction shims ensures your axle remains centered and your steering geometry is restored to factory-like precision after lifting.

• Manufacturer Part Number: CS-FLVL-BC-CS-05
• 2.5/3.5-inch lift height (vehicle dependent)
• Carli-Tuned 2.0 remote reservoir shocks with aluminum bodies
• Linear rate coil springs for predictable handling
• Includes adjustable track bar and caster correction shims
• Includes extended brake lines and bump stop drops
• 9" front and 13.8" rear wheel travel
• Clears up to 37" tires

Fits 2017-2023 Ford F-250 and F-350 Super Duty (King Ranch, Lariat, Limited, Platinum, XL, XLT).

The Carli Dominator 3.0 Shock Package is the ultimate damping solution for the 2017-2023 Ford Super Duty equipped with a 4.5-inch or 5.5-inch lift. This system replaces standard shocks with massive 3.0-inch diameter shock bodies, providing the oil volume and surface area necessary to dissipate heat during aggressive off-road use and sustained high-speed driving. By moving to a larger bore, this package delivers significantly more control and bottom-out resistance compared to smaller 2.0 or 2.5 series shocks.

Each shock is custom-valved specifically for the Super Duty chassis to eliminate the harshness often associated with heavy-duty trucks. The remote reservoir design ensures consistent performance by keeping the shock oil cool and preventing cavitation, even when navigating washboard roads or technical terrain. This package provides a transformative increase in ride quality without sacrificing the truck's ability to tow and haul.

• Specifically engineered for 2017-2023 Ford F-250/F-350 Super Duty 4WD models
• Validated for suspension systems with 4.5" or 5.5" of lift height
• 3.0" shock bodies for maximum thermal capacity and damping force
• Remote reservoirs increase oil volume for fade-free performance
• Custom Carli internal valving for superior ride quality and control
• Includes all necessary mounting hardware for the shock upgrade
• Manufacturer Part Number: CS-FD30SPKG-45-1723

Fits select 2017-2026 Ford F-250 and F-350 Super Duty 4x4 models (Diesel with 3.5-inch to 4-inch axle tubes).

Engineered in collaboration with Deaver Spring Inc., this Carli Suspension progressive leaf spring pack is specifically tuned to improve the ride quality and articulation of your Super Duty. By replacing the stiff factory main leaf and overload springs with a multi-leaf progressive design, this kit eliminates the harsh rebound characteristics often felt when the bed is empty. This system produces approximately 1 inch of lift and is designed to eliminate the factory rear blocks for a more stable and predictable suspension feel, especially when paired with Carli 2.5-inch or 4.5-inch suspension systems.

• Progressive multi-leaf design for enhanced small-bump compliance and off-road articulation
• Delivers up to 15 inches of suspension travel
• Removes factory lift blocks to reduce axle wrap and improve stability
• Specifically tailored for Diesel models with 3.5-inch to 4-inch axle tubes
• Includes heavy-duty U-bolts and rear bump stop drops
• Manufacturer Part Number: CS-FFSP-LVL-17

Fits 2017+ Ford F-250 and F-350 Super Duty 4WD trucks.

Carli Suspension extended front sway bar end links are engineered to correct sway bar geometry on leveled or lifted trucks. When a vehicle's ride height is increased, the factory end links often become too short, pulling the sway bar out of its optimal operating plane and potentially causing binding or contact with other suspension components. These extended links restore the sway bar to a neutral position, ensuring the anti-sway system functions correctly without interference.

Built as a heavy-duty replacement for the factory units, these links provide the necessary clearance for aftermarket suspension cycles. They bolt directly into the factory mounting locations, making them a straightforward upgrade for owners looking to maintain predictable handling and ride quality after a height adjustment.

• Corrects sway bar operating angle on leveled or lifted applications
• Prevents sway bar binding and component interference
• Heavy-duty construction for improved durability over OEM links
• Direct bolt-on installation with included hardware
• Manufacturer Part Number: CS-FEL-17

Fits select 1979-2004 Ford Mustang models including GT, LX, and SVT Cobra with the 8.8-inch rear differential.

Minimize deflection and eliminate the binding inherent in factory rubber bushings with the BMR Suspension BK074 Differential Spherical Bearing Kit. These bearings replace the soft OEM bushings where the upper control arms connect to the differential housing. By replacing compliant rubber with a solid spherical pivot, you achieve significantly reduced wheel hop, more consistent launches, and improved predictable handling during high-speed cornering.

Constructed for high-horsepower applications, each kit features housings CNC-machined from 6061-T6 billet aluminum. The heavy-duty Teflon-lined spherical bearings are self-lubricating for quiet operation and a long service life. The assembly is finished in black anodizing for corrosion resistance and includes CNC-machined aluminum spacers to ensure a precise, bolt-on fit for your upper control arms.

• Replaces factory differential housing bushings (MPN: BK074)
• Eliminates deflection for better traction and handling
• CNC-machined 6061-T6 billet aluminum housings
• Heavy-duty Teflon-lined spherical bearings
• Black anodized finish for durability
• Includes all necessary CNC-machined spacers

Fits 2005-2013 Chevrolet Corvette (Base, Grand Sport, Z06, ZR1, 427, and Z06 Carbon).

The BMR Suspension Polyurethane Transmission/Differential Mount (TM560R) is engineered to replace the compliant factory rubber mounts that allow for excessive drivetrain movement. By utilizing high-durometer polyurethane, this mount significantly reduces transmission deflection. This reduction in movement leads to sharper throttle response, faster reaction times, and more precise gear engagement, especially under the high torque loads seen in drag racing and high-performance street applications.

Designed for durability and performance, this mount replaces the worn or soft OE bushing to provide a more stable drivetrain platform without the extreme vibration associated with solid metal mounts. It is a direct bolt-on solution that installs into the factory mounting locations.

• Reduces transmission and differential deflection for improved power delivery
• Enhances shifting precision and throttle response
• High-durometer polyurethane construction with a red finish
• Ideal for drag racing, handling, and street performance applications
• Direct replacement for OE mounts
• Manufacturer Part Number: TM560R

Fits 2016-2021 Honda Civic Coupe and Sedan models, including Base and Si trims (Excludes Type-R).

BLOX Racing Lowering Springs are engineered to enhance your vehicle's handling performance and aesthetic by lowering its center of gravity. These springs reduce body roll during hard cornering and minimize nose-dive under heavy braking, delivering a more precise and responsive driving experience. Designed to work with factory struts, they offer a significant upgrade in stance and control while maintaining the ride quality necessary for a daily-driven street car.

• Improves cornering response and overall stability
• Reduces fender well gap for an aggressive stance
• Wound from high-quality materials for consistent spring rates
• Direct fit for 2016-2021 Honda Civic Coupe and Sedan (Base and Si)
• Manufacturer Part Number: BXSS-01006

The BLOX Racing Shorty Performance Air Filter Kit is engineered for high-performance applications where engine bay space is at a premium. This compact induction solution combines a high-flow 5-inch "Shorty" air filter with a precision-machined 2.5-inch velocity stack to optimize intake air velocity and volume.

By smoothing the transition of air entering the intake tract, the included velocity stack reduces turbulence and intake restriction, allowing for more consistent airflow into the engine. The kit comes complete with a durable silicone coupler and necessary hardware for a secure, leak-free installation. This setup is ideal for custom forced induction or naturally aspirated builds requiring a high-efficiency filtration system in a condensed footprint.

• Manufacturer Part Number: BXIM-00321
• Filter Specification: 5-inch Shorty high-flow element
• Velocity Stack Size: 2.5-inch inlet
• Kit Components: Includes air filter, velocity stack, silicone coupler, and clamps
• Application: Designed for tight clearances in performance intake systems

Fits select 1992-2000 Honda Civic (EG/EK) and 1994-2001 Acura Integra (DC2/DC4).

The BLOX Racing Drag Pro+ Series coilover system is engineered specifically for front-wheel-drive drag racing applications where launch consistency and weight transfer management are critical. These coilovers utilize a specialized valving profile and a high-rate 18kg rear spring to significantly reduce rear-end squat during hard launches. By maintaining a more level chassis attitude, these units help keep the vehicle's weight over the front drive wheels to maximize traction and improve 60-foot times.

Constructed with high-quality internal components and durable finishes, the BXSS-00103 kit provides the necessary stiffness for dedicated track use while allowing for precise ride height adjustments. Each unit is designed to bolt directly into the factory suspension locations of EG, EK, and DC chassis, making them a straightforward upgrade for serious drag racers.

• Manufacturer Part Number: BXSS-00103
• Series: Drag Pro+
• Rear Spring Rate: 18kg/mm
• Application: Drag racing specific
• Fitment: Honda Civic (1992-2000), Acura Integra (1994-2001)
• Designed to minimize rear-end squat and maximize front-wheel traction

BLOX Racing Street Series forged lug nuts provide a high-strength, lightweight solution for securing your aftermarket wheels. Manufactured through a precision forging process, these lug nuts offer superior structural integrity and durability compared to standard cast hardware, ensuring they can withstand the rigors of spirited driving and frequent wheel removal.

• Thread Pitch: 12x1.5mm
• Quantity: Set of 16 lug nuts
• Construction: High-strength forged material for maximum durability
• Series: Street Series
• Manufacturer Part Number: BXAC-00103-SSSI

Designed for enthusiasts who prioritize both performance and reliability, these fasteners provide a secure seat and clean aesthetic. The forged construction reduces rotating mass while maintaining the thread strength necessary for safe operation. Always verify your vehicle's thread pitch and wheel seat type before installation to ensure a proper match with this 12x1.5mm set.

The BLOX Racing Shorty Performance Air Filter kit is engineered for high-performance applications where engine bay clearance is limited. This setup combines a compact 5-inch shorty filter with a 3.5-inch velocity stack to maximize air intake volume while smoothing out turbulent airflow entering the induction system.

The included velocity stack features a precision-radiused entry designed to accelerate air into the intake tract, improving throttle response and engine efficiency. This versatile kit is an ideal solution for custom turbocharger setups, naturally aspirated builds, or any high-flow intake application requiring a space-saving design without sacrificing filtration performance.

• Manufacturer Part Number: BXIM-00323-BK
• Filter Length: 5 inches
• Velocity Stack Inlet: 3.5 inches
• Kit Includes: Performance air filter, velocity stack, and silicone coupler
• Color: Black

Fits 1996-2000 Honda Civic CX, DX, EX, GX, HX, LX, Si, and Value Package.

BLOX Racing Lowering Springs are engineered to enhance your vehicle's handling performance while delivering a more aggressive, lowered stance. By dropping the center of gravity, these springs significantly reduce body roll during aggressive cornering and minimize nose-dive under hard braking, resulting in more predictable and stable suspension geometry. Each spring is CNC-wound to precise tolerances, ensuring consistent spring rates and long-term durability for both daily street driving and spirited track use.

• Lowers the center of gravity for improved handling and stability
• Reduces wheel gap for a more aggressive aesthetic
• CNC-wound construction for consistent performance
• Designed to work with factory or aftermarket performance shocks
• Manufacturer Part Number: BXSS-01002

Secure your wheels with the strength and precision of BLOX Racing Street Series forged lug nuts. These 12x1.5mm lug nuts are forged for enhanced durability compared to standard cast hardware, making them a reliable choice for street-driven vehicles. Whether you are replacing worn factory nuts or installing aftermarket wheels, this complete set ensures consistent torque and a secure fit across all wheel studs.

• Thread Pitch: 12x1.5mm
• Construction: Forged for high strength and durability
• Product Line: Street Series
• Quantity: Full set of 20 lug nuts
• Manufacturer Part Number: BXAC-00104-SSSI

Fits 1992-2001 Honda Civic and Acura Integra models (All trims including Si, GS-R, and Type R).

The BLOX Racing Competition Series coilover system is engineered specifically for enthusiasts demanding superior handling on the track. Designed for the EG, EK, and DC chassis, these coilovers feature aggressive spring rates and performance-tuned valving to provide maximum stability during high-speed cornering and precision maneuvers. This setup replaces the soft factory suspension with a rigid, track-ready platform that minimizes body roll and enhances steering response.

• Manufacturer Part Number: BXSS-00101
• Spring Rates: 12kg/mm (Front) / 10kg/mm (Rear)
• Compatible Chassis: EG, EK, DC
• Ideal for road racing, time attack, and aggressive track use
• Full set of front and rear coilover assemblies

Compatibility includes 1992-2000 Honda Civic (CX, DX, EX, GX, HX, LX, Si, VX, Value Package) and 1994-2001 Acura Integra (GS, GS-R, LS, RS, Special Edition, Type R).

The BLOX Racing Shorty Performance Air Filter kit is engineered for high-performance builds where engine bay space is at a premium. By combining a 5-inch "shorty" high-flow filter with a precision-machined 3-inch velocity stack, this system utilizes the venturi effect to smooth air entry and increase intake air velocity. This design reduces turbulence at the intake mouth, allowing your engine to draw in a higher volume of air more efficiently.

The compact footprint makes this kit an ideal solution for custom turbocharger inlets, naturally aspirated ITB setups, or engine swaps with tight clearances. The included silicone coupler and hardware ensure a secure, vibration-resistant connection to your existing 3-inch intake piping.

• Manufacturer Part Number: BXIM-00322
• 5-inch diameter "Shorty" high-flow filter element
• 3-inch inlet velocity stack for optimized air induction
• Includes heavy-duty silicone coupler and installation hardware
• Designed for maximum airflow in restricted engine compartments

The BLOX Racing Shorty Performance 5-inch Air Filter is engineered for high-performance applications where engine bay real estate is limited. The "shorty" design allows for maximum airflow and filtration in tight spaces, making it an essential component for custom intake setups, turbocharger inlets, and forced induction systems where traditional large-scale filters cannot fit.

Constructed with high-flow filtration media, the BXIM-00320 maintains consistent air velocity while protecting the engine from harmful particulates. Its compact profile does not sacrifice performance, ensuring your induction system receives the volume of clean air necessary for optimal power delivery.

• Manufacturer Part Number: BXIM-00320
• Inlet Diameter: 5.0 inches (127mm)
• Profile: Shorty Performance design for compact fitment
• Application: Ideal for custom intakes and turbo inlets

Fits 2013-2026 Ram 3500 and 2014-2026 Ram 2500 heavy-duty 4WD trucks.

The Bilstein B8 5100 Dual Steering Damper Kit is a bolt-on auxiliary solution engineered to stabilize steering geometry in solid-axle 4WD vehicles. By mounting two gas-pressurized monotube dampers in an inline, opposing configuration, this kit significantly improves "on-center" feel and provides immediate steering feedback. Designed to control even minute movements that lead to steering wheel shake and vibration, these dampers ensure you maintain complete command of your truck whether on the highway or navigating rough terrain.

• Gas-pressurized monotube design for consistent, fade-free performance
• Opposing damper orientation enhances steering isolation and stability
• Specifically tuned to reduce vibrations and steering wheel kickback
• Direct bolt-on auxiliary kit for 4WD solid-axle applications
• Manufacturer Part Number: 53-264817

Fits select 2019-2026 Ram 1500 trucks (Big Horn, Express, HFE, Laramie, Laramie Longhorn, Limited Longhorn, Lone Star, Longhorn, Rebel, and Tradesman).

Bilstein B8 5160 remote reservoir shock absorbers are engineered as a high-performance, direct-fit solution for lifted Ram 1500 applications. By utilizing a remote reservoir, these shocks provide significantly increased oil capacity for superior heat dissipation and extended wheel travel compared to standard monotube designs. This setup is specifically tuned to maintain consistent handling and damping control when navigating rough terrain or hauling heavy loads.

The B8 5160 series features velocity-sensitive digressive valving that reacts instantly to changing road surfaces, ensuring fade-free performance. For a clean and professional installation, each shock is equipped with a 360-degree swivel banjo hose fitting and includes a durable billet reservoir mount where applicable.

• 46mm monotube design provides consistent, fade-free performance in extreme conditions
• Remote reservoir enhances cooling capacity and maximizes suspension travel
• Self-adjusting deflective disc valving for immediate response to surface changes
• 360-degree swivel banjo hose fitting allows for low-profile, flexible mounting
• Direct-fit installation to factory mounting points for lifted vehicles
• Manufacturer Part Number: 25-316919

Fits 2001-2007 Toyota Sequoia Limited and SR5 models.

The Bilstein B8 5100 (24-276061) is a high-gas pressure monotube shock absorber engineered specifically for lifted SUVs. These shocks replace worn factory components with a robust 46mm bore design that provides consistent, fade-free performance by effectively dissipating heat during extended use on or off the trail.

Each B8 5100 shock utilizes patented digressive valving with a velocity-sensitive piston. This setup allows the shock to react instantly to changing surface conditions, delivering a firm, stable feel on smooth pavement while maintaining compliant damping over rough terrain. Specifically tuned for the first-generation Sequoia's geometry, these shocks offer a significant upgrade in ride quality, handling, and chassis control.

• 46mm monotube design ensures consistent, fade-free performance in all conditions
• Patented digressive valving instantly reacts to changing surface conditions
• Vehicle-specific tuning optimizes performance for the Sequoia platform
• Zinc-plated finish provides durable protection against corrosion and debris
• Direct-fit installation for lifted truck and SUV applications
• Manufacturer Part Number: 24-276061

Fits 1997-2004 Porsche Boxster (986) Base, Roadster, S, and S Special Edition models.

The Bilstein B8 Performance Plus strut assembly is the definitive upgrade for Porsche Boxster owners looking to optimize their vehicle's handling after installing lowering springs. While standard struts often reach the limit of their travel when paired with shorter springs, the B8 is specifically engineered with a shortened stroke to maintain proper spring tension and suspension geometry. This ensures the damper operates in its ideal range for improved response and control.

Utilizing Bilstein's signature gas-pressure monotube technology, these struts provide superior heat dissipation and consistent damping force even under high-performance driving conditions. Each unit is precision-valved for the 986 chassis to deliver a sportier feel while maintaining the refined ride quality expected of a Porsche. Whether you are refreshing a worn suspension or completing a lowering project, the B8 Performance Plus offers a direct-fit solution that meets or exceeds original equipment standards.

• Performance Tuned: Engineered specifically for use with aftermarket lowering springs and factory sport suspensions.
• Monotube Design: High-pressure gas monotube construction for fade-free performance and heat management.
• Chassis Specific: Application-specific valve settings rigorously tested for the Porsche 986 platform.
• Direct Fit: Replaces factory front struts using existing mounting points for a straightforward installation.
• Manufacturer Part Number: 22-046239

Fits 2002-2005 Dodge Ram 1500 (ST, SLT, Laramie, and SRT-10).

Lower your truck’s center of gravity for a more aggressive stance and improved handling with the Belltech 811SP Street Performance lowering kit. This all-in-one suspension solution is engineered specifically for the 2002-2005 Dodge Ram 1500 platform, ensuring that your drop doesn't come at the cost of ride quality or safety. By combining high-quality lowering components with Belltech’s signature Street Performance shocks, this kit provides a firmer, more controlled feel during cornering and reduced body roll.

Every 811SP kit includes all necessary Grade 8 installation hardware and alignment-correcting components to maintain factory suspension geometry. The included Street Performance shock absorbers are valved to complement the increased spring rates and altered travel of a lowered vehicle, preventing the bottoming out and bounciness common with lesser kits.

• Complete all-in-one box solution for lowering and damping
• Includes Belltech Street Performance shock absorbers for enhanced rebound and compression control
• Maintains proper suspension alignment and safety standards
• Constructed with heavy-duty Grade 8 hardware for secure mounting
• Engineered to fit factory mounting points for a straightforward installation
• Manufacturer Part Number: 811SP

Fits 1989-1993 Chevrolet Camaro and Corvette, Pontiac Firebird, and GMC Syclone and Typhoon models.

The BBK Power Plus Series twin 58mm throttle body is engineered as a high-flow, bolt-on replacement for the restrictive factory unit. By increasing airflow by up to 30%, this component improves horsepower, torque, and throttle response without requiring a custom PCM tune. Each unit is CNC-machined from a premium 356 aluminum casting to ensure precise tolerances and long-term durability.

Designed for easy installation and OEM-level drivability, this throttle body features double-sealed bearings and O-ringed throttle shafts for smooth operation and leak-free performance. The assembly includes OEM-style die-stamped throttle linkages for a direct fit to your existing cables.

• Twin 58mm bore design for increased intake volume
• CNC-machined from 356 aluminum casting
• Double-sealed bearings and O-ringed throttle shafts
• OEM-style die-stamped throttle linkages for direct fitment
• Compatible with factory ECU tune
• Made in the USA
• Manufacturer Part Number: 1539

Fits 1998-2007 Toyota Land Cruiser 100 Series models with Independent Front Suspension (IFS).

The Old Man Emu Nitrocharger Plus front shock is engineered to provide superior control and comfort for the 100 Series Land Cruiser. Developed through extensive testing on the Australian Outback, this shock absorber is valved specifically to manage the unique weight and suspension geometry of the Land Cruiser's IFS setup. It effectively dampens oscillations and maintains tire contact over corrugated roads and technical trails, significantly reducing driver fatigue and component wear.

• Twin-tube design protects internal components from rock strikes and trail debris
• Vehicle-specific valving ensures optimal damping for heavy-duty off-road and towing applications
• Durable polyurethane bushings for reduced noise and long service life
• Triple-lip oil seal for maximum gas and oil retention
• Manufacturer Part Number: 63001

Fits 2022 Ford Ranger and Everest models.

Protect your vehicle's critical powertrain components from off-road hazards with ARB Under Vehicle Protection (UVP). This skid plate system is engineered to shield the engine oil pan and gearbox assembly from impact damage, rocks, and debris when navigating technical terrain. Designed to provide maximum ground clearance, these panels offer essential armor for the underside of your vehicle without compromising serviceability.

• Comprehensive coverage for the engine oil pan and gearbox
• Direct bolt-on installation using factory mounting points
• Engineered for high-clearance off-road applications
• Manufacturer Part Number: 5440300

Fits 2025+ Toyota 4Runner models.

The ARB Old Man Emu MT64 suspension system is engineered for drivers who demand consistent damping performance during extended off-road travel without sacrificing on-road refinement. This kit provides a 3-inch front lift and a 2-inch rear lift, creating the necessary clearance for larger tires and improving the vehicle's approach and departure angles. Utilizing a massive 64mm internal bore, the MT64 shocks dissipate heat more effectively than standard monotube designs, ensuring fade-free performance over washboard roads and technical trails.

• Manufacturer Part Number: 2134K
• Front Lift Height: 3 inches
• Rear Lift Height: 2 inches
• Shock Series: MT64 (64mm Monotube)
• Application-specific valving for the 2025+ 4Runner platform
• Durable construction designed for heavy overland loads and varied terrain

ARB Old Man Emu (OME) struts and cartridges are engineered to improve vehicle handling and control, whether you are navigating technical off-road trails or hauling heavy loads on the highway. These Nitrocharger components are designed to replace factory units, offering a significant upgrade in damping performance and durability. By utilizing specific valving tuned for increased spring rates and accessory weight, they help eliminate the wallowing feel often associated with stock suspension systems under load.

• Engineered for superior ride quality and increased load-carrying capacity
• Heavy-duty construction designed to withstand harsh off-road environments
• Precision-tuned valving to match specific spring rates and vehicle weights
• Direct-fit replacement for factory struts or cartridges
• Includes necessary hardware for a secure installation
• Manufacturer Part Number: 2121K

The ARB Old Man Emu (OME) Nitrocharger Sport Strut (MPN: 2117K) is a heavy-duty suspension upgrade engineered to deliver superior ride control and durability. Designed to replace restrictive factory dampers, these Nitrocharger Sport struts utilize vehicle-specific valving to account for various load requirements and off-road conditions, ensuring the suspension remains composed on uneven terrain.

• Twin-tube design protects the internal piston from stone damage and harsh impacts.
• Triple-lip oil seal and gas retention system for long-term reliability under high heat.
• 18mm induction-hardened chrome piston rod for maximum strength and corrosion resistance.
• Large-bore 35mm teflon-banded piston provides increased oil volume for consistent damping.
• Includes high-quality bushings and hardware required for installation.

Each OME strut is individually dyno-tested to verify performance and is designed as a direct-replacement component to enhance stability, reduce body roll, and improve overall vehicle handling for daily driving and overland travel.

ARB Old Man Emu (OME) Nitrocharger Sport struts are engineered to transform vehicle handling and control across both highway and off-road terrain. As a direct replacement for factory components, the 2118K strut utilizes a twin-tube design to provide a more stable, controlled ride, particularly when the vehicle is equipped with heavy accessories or navigating uneven surfaces.

Built to withstand the rigors of 4x4 travel, these struts feature specific valving to manage the increased weight and leverage of larger tires and aftermarket armor. The internal components are protected by a heavy-duty outer tube, ensuring consistent damping performance even in harsh conditions.

• Twin-tube design for increased durability and protection of internal components
• Triple-lip oil seal and gas retention system for long-term reliability
• High-quality bushings for reduced noise and improved service life
• Heavy-duty 18mm chrome-hardened piston rod
• Durable powder-coated finish for corrosion resistance
• Manufacturer Part Number: 2118K