Improve your vehicle's handling and load-carrying capacity with the ARB Old Man Emu (OME) Nitrocharger Sport Strut. Engineered to replace factory suspension components, this nitrogen gas-charged strut is valved specifically to manage the increased stresses of off-road driving while maintaining a controlled, comfortable ride on pavement. The twin-tube design provides protection for internal components from rock damage, ensuring reliability in harsh environments.

• Triple-lip oil seal and gas retention system for long-term performance under high-temperature cycles.
• Heavy-duty 18mm chrome hardened shaft for maximum structural strength.
• Vehicle-specific valving improves damping control and reduces body roll.
• Internal nitrogen gas charging provides consistent performance and reduces aeration.
• Integrates seamlessly with Old Man Emu coil springs and suspension systems.

Manufacturer Part Number: 2120K

Fits select 2010-2024 Toyota 4Runner models including SR5, Limited, Trail, Nightshade, TRD Off-Road, TRD Pro, TRD Sport, and Venture.

The Old Man Emu Nitrocharger Plus suspension system is engineered to manage the increased weight of off-road accessories while improving ride quality and vehicle control. This integrated kit addresses vehicle sag caused by heavy bumpers, winches, or cargo by providing specifically tuned and matched components. The Nitrocharger features a durable twin-tube design, where the outer reserve tube protects internal components from trail debris and impacts in rough terrain.

This kit provides a 2.5-inch front lift designed for constant loads between 220-330 lbs and a 2-inch rear lift rated for 440 lbs. To ensure precision, the front struts include a 5-position spring seat adjustment system with included coil seat spacers to accommodate various vehicle setups and weight distributions.

• Front Lift: 2.5 inches (220-330 lbs constant load weight)
• Rear Lift: 2.0 inches (440 lbs constant load weight)
• Shock Design: Old Man Emu Nitrocharger Plus twin-tube struts and shocks
• Construction: Heavy-gauge steel tube for increased structural strength
• Adjustment: 5-position spring seat adjustment for height fine-tuning
• Installation: Direct replacement for OE suspension systems

ARB Old Man Emu (OME) Struts and Cartridges are engineered to deliver significant improvements in ride quality, vehicle control, and handling. These suspension components are designed to withstand the rigors of off-road use while maintaining refined street performance. By utilizing precision-tuned valving, these struts effectively manage the damping requirements of vehicles equipped with additional weight from bumpers, winches, or heavy cargo loads.

• Nitrogen gas-charged design reduces oil aeration and heat fade for consistent performance
• Heavy-duty construction for increased longevity in harsh environments
• Precision-valved to provide optimal damping and wheel travel control
• High-quality multi-lip seals help prevent leakage and protect internal components

• Manufacturer: ARB
• Series: Old Man Emu (OME)
• Part Number: 2116K

Fits 2025+ Toyota 4Runner models.

The ARB Old Man Emu MT64 suspension system is engineered for drivers who demand consistent damping performance across diverse terrain. Utilizing a massive 64mm internal bore, these monotube shocks provide exceptional oil capacity and heat dissipation, preventing shock fade during high-speed desert runs or technical off-road climbs. This comprehensive kit (MPN 2135K) includes Old Man Emu Upper Control Arms (UCAs), which are essential for correcting suspension geometry and maintaining proper caster and camber settings once the vehicle is lifted, ensuring factory-like handling and tire wear.

• 64mm large-bore internal bypass monotube shock design for maximum heat management
• Includes Upper Control Arms (UCAs) to restore alignment geometry and ball joint travel
• Application-specific tuning for the 2025+ 4Runner chassis and weight distribution
• Designed for long-range durability in extreme overlanding environments
• Manufacturer Part Number: 2135K

The ARB Air Locker Seal Housing Kit (081501SP) is a critical service component designed to maintain the pneumatic integrity of your locking differential. This kit is used to replace worn or damaged seal housings that may cause air leaks, ensuring your locker engages reliably when you need traction most.

Precision-engineered to meet ARB's strict tolerances for off-road performance, this kit includes the specific 81/93 housing and the necessary O-rings to create a dependable, leak-free seal. It is a vital part for routine differential maintenance or for repairing lockers showing signs of pressure loss.

• Direct replacement ARB service part
• Includes 81/93 seal housing and required O-rings
• Restores reliable pneumatic engagement of the Air Locker
• Durable construction for long-term off-road use
• Manufacturer Part Number: 081501SP

Enhance your vehicle's handling and ride control with the ARB Old Man Emu (OME) Nitrocharger Sport Strut. Engineered to bridge the gap between street comfort and off-road durability, this strut (MPN: 2119K) is designed to handle the increased loads and stresses of technical terrain and heavy towing. It utilizes a sophisticated twin-tube design to protect the internal components from stone damage while providing consistent dampening performance.

Built with a focus on longevity, this assembly features a heavy-duty triple-lip oil seal and a hardened chrome piston rod to withstand harsh environments. The high-flow piston and advanced valving are tuned to reduce aeration and oil foaming, ensuring your suspension maintains its performance even during extended cycles of high-frequency impacts.

• Manufacturer Part Number: 2119K
• Series: Old Man Emu Nitrocharger Sport
• Design: Durable twin-tube construction
• Components: Includes premium triple-lip oil seal and high-flow internal piston
• Function: Replaces factory struts to improve stability and load-carrying capacity

Fits 2015-2024 Ford F-150 and Raptor models equipped with the 2.7L or 3.5L EcoBoost engine.

The AMS Performance Stock Loc Intercooler is engineered to solve the thermal management issues inherent in the factory EcoBoost cooling system. By significantly increasing core volume and surface area over the stock unit, this intercooler reduces intake air temperatures (IATs) and prevents heat soak during sustained boost, heavy towing, or high-ambient-temperature driving. Its "Stock Loc" design ensures it mounts directly to factory locations, making it a true bolt-on upgrade that maintains the vehicle's structural integrity and airflow path.

• Direct-fit installation in the factory intercooler location
• Optimized for Ford 2.7L and 3.5L EcoBoost twin-turbo engines
• Durable black finish without external branding for a stealthy, OEM+ look
• Cast aluminum end tanks for improved pressure handling and internal airflow
• Replaces restrictive factory core to support higher boost levels and consistent power
• Manufacturer Part Number: AMS.55.09.0001-4

Fits 2015+ Ford F-150 and F-150 Raptor models (2.7L / 3.5L EcoBoost).

The AMS Performance Stock Loc Intercooler is a direct-fit upgrade engineered to combat heat soak and maintain consistent power delivery. Designed to replace the restrictive factory core, this intercooler provides significantly improved cooling efficiency, ensuring lower intake air temperatures (IATs) during heavy towing, high-load off-roading, or performance driving.

Built for a seamless installation, this Stock Loc version utilizes the factory mounting points and hardware for a straightforward bolt-on process. This unit features a silver finish without the AMS logo for a clean, understated appearance behind the front grille. It is an essential modification for EcoBoost owners looking to maximize the thermal efficiency of their forced induction system.

• Direct bolt-on replacement for the OEM intercooler
• Optimized for the 2.7L and 3.5L EcoBoost engine platforms
• Mounts in the factory location for simple installation
• Silver finish with no logo for a subtle, professional look
• Manufacturer Part Number: AMS.55.09.0001-2

Fits select 2009-2024 Dodge Ram 1500 and Ram 1500 Classic (V8-5.7L).

The aFe POWER Quantum Pro 5R cold air intake system is engineered to optimize airflow and filtration for the 5.7L HEMI engine. This system features a unique integrated filter-to-housing design that utilizes four captive screws to create a positive surface area seal, ensuring a secure fit and simplified maintenance. The housing is constructed from high-impact, industrial-grade XLPE (cross-linked polyethylene) with a 5-rib design for maximum durability and heat soak resistance.

Air is drawn through the Pro 5R performance filter, which utilizes five layers of progressively finer, pre-oiled cotton gauze media for maximum flow and protection. The filter base includes an integrated 3-angle velocity stack to smooth out intake turbulence and accelerate airflow into the CAD-designed, dyno-tuned intake tube. To account for engine torque, a heavy-duty silicone bellows coupling connects the system to the throttle body while maintaining a secure, airtight seal.

• Pro 5R Filter: Oiled, 5-layer progressive cotton gauze media for high-flow performance.
• Integrated Housing: Durable XLPE construction with a unique filter-to-housing interface.
• Heat Resistance: XLPE material protects intake air temperatures from engine bay heat.
• Efficient Flow: Built-in 3-angle velocity stack and dyno-tuned intake tube.
• Simplified Install: Utilizes factory mounting points and captive hardware to prevent lost screws.
• MPN: 53-10009R

Fits 2014-2016 Ram 2500 and 3500 trucks equipped with the V8-6.4L Hemi engine.

The aFe Power Momentum GT intake system is engineered to outflow the factory intake by 24%, delivering a cooler air charge and improved throttle response. At the heart of this system is a one-piece sealed housing made from cross-linked polyethylene (XLPE), which eliminates the heat soak and leakage common with multi-piece designs. A large, clear sight window allows for quick, tool-free filter inspections, while an auxiliary air inlet provides additional airflow when needed (a urethane plug is included for those who prefer to seal the inlet).

This system features a dyno-tuned intake tube designed to optimize power delivery while maintaining a precise fit. For a secure connection to the factory breather line, a high-temperature reinforced silicone elbow coupling with a CNC-machined aluminum fitting is included. The system utilizes a patented housing-to-filter interface and bolts directly to factory mounting locations for a straightforward installation.

• Flows 24% better than the factory intake system
• Pro DRY S air filter: Three layers of oil-free synthetic media for maximum convenience
• One-piece sealed XLPE housing with auxiliary air inlet and clear inspection window
• High-temperature reinforced silicone elbow with aluminum breather fitting
• Dyno-tuned intake tube for optimized airflow and power gains
• Manufacturer Part Number: 51-72103

Fits 2004-2015 Nissan Titan, Armada, and 2004-2010 Infiniti QX56 (V8-5.6L).

The aFe Momentum GT Pro 5R Stage-2 Intake System is engineered to provide maximum airflow and engine protection through a completely sealed, one-piece housing design. This system replaces the restrictive factory airbox with a high-flow rotomolded tube and a massive 360-degree radial air filter, significantly reducing intake turbulence and increasing air velocity. The sealed housing features a unique filter-to-housing interface (patent pending) that simplifies installation while ensuring a secure, leak-free seal.

• Pro 5R Filter Media: Features 5 layers of progressive cotton gauze to provide the highest airflow and performance while remaining washable and reusable.
• Sealed Rotomolded Housing: Durable one-piece housing protects the intake from engine heat and includes a clear sight window for easy filter inspection.
• Massive 5-Inch Flange: Large filter flange with an inverted top maximizes surface area for increased flow.
• Integrated Air Scoop: Includes an auxiliary air scoop to draw in cooler ambient air, featuring a urethane plug for versatile configuration.
• High-Quality Hardware: Comes with heavy-duty stainless steel T-bolt clamps and a reinforced silicone coupling for a reliable fit under high vacuum or temperature.

• Manufacturer Part Number: 54-76101
• Filter Media: Pro 5R (5-Layer Cotton Gauze)
• Flange Diameter: 5.0 in
• Tube Material: Rotomolded Plastic
• Warranty: 2-Year Limited

Fits 2025-2026 Nissan Armada and Infiniti QX80 (V6-3.5L tt).

The aFe Power SCORCHER BLUE Power Module provides a significant performance upgrade by increasing turbo boost pressure to improve vehicle efficiency, torque, and throttle response. This next-generation plug-and-play module (part number 77-86107) connects via Bluetooth 4.0 to your iOS or Android smartphone, allowing for on-the-fly power adjustments without routing wires through the firewall. The included LED control switch provides tactile mode selection directly from the cabin, while the companion app offers advanced monitoring and customization.

• Four power settings: Stock (Green), Sport (Yellow), Sport+ (Orange), and Race (Red)
• Real-time engine parameter display including turbo boost gauge (MAP) via smartphone app
• Performance tracking for 0-60 mph and 1/4 mile times
• Customizable power modes and firmware updates via the free aFe POWER SCORCHER BLUE app
• Plug-and-play installation leaves no trace (footprint) on the factory ECU
• Bluetooth 4.0 connectivity for wireless control and handheld remote functionality

Fits 2017-2024 Nissan Titan models (V8-5.6L), including Platinum Reserve, PRO-4X, S, SL, and SV trims.

The aFe Power Momentum GT intake system is engineered to maximize airflow and performance for the 5.6L Endurance V8. This system replaces the restrictive factory air box with a one-piece, roto-molded sealed housing designed to heat-soak. It includes a built-in auxiliary air scoop to pull additional cool air from the front of the vehicle and a large, clear sight window for quick filter inspections without needing to disassemble the housing.

At the core of this system is the Pro DRY S air filter, featuring three layers of oil-free synthetic media. This design offers 99.2% cumulative filtration efficiency while significantly increasing airflow compared to standard paper filters. The unique, patent-pending filter-to-housing interface allows for a larger filter size, increasing air volume and simplifying the installation process. The system also features a CAD-designed, dyno-tuned intake tube for optimal velocity and power gains.

• Manufacturer Part Number: 51-76108
• Filter Media: 3-Layer Pro DRY S oil-free synthetic media (washable and reusable)
• Housing: One-piece roto-molded sealed housing with auxiliary scoop
• Intake Tube: Dyno-tuned, high-quality XLPE construction
• Hardware Included: Premium stainless steel clamps and silicone elbow coupling
• Installation: Bolt-on design requires no cutting or drilling of factory parts
• Filtration Efficiency: 99.2% cumulative efficiency rating

Fits select 2008-2025 Lexus GS, IS, and RC models (2.5L / 3.5L).

The aFe Power MagnumFLOW PRO 5R replacement air filter is engineered to outperform restrictive factory paper filters, providing increased airflow to improve engine efficiency and response. This high-flow, oiled filter utilizes five layers of progressively finer mesh cotton gauze media to deliver maximum airflow while maintaining high filtration standards. The tall, open, evenly spaced pleats provide a large surface area for excellent dust-holding capacity, extending the service cycle between cleanings.

Constructed with a 100-percent polyurethane boxed frame, this filter is built to withstand engine bay heat and maintain its structural integrity over time. An integrated urethane bump seal ensures a precise, leak-free fit within the factory airbox. This is a direct OE replacement that drops into the housing without modification.

• PRO 5R Media: Five layers of progressive oiled cotton gauze for maximum performance.
• Polyurethane Frame: Durable boxed frame prevents seal bypass and resists heat soak.
• Serviceable Design: Fully washable and reusable for multiple cleaning cycles.
• Direct Fit: Hassle-free installation into the original factory air housing.
• Manufacturer Part Number: 30-10261

Fits select 2003-2011 Toyota 4Runner, FJ Cruiser, Tacoma, and Tundra models equipped with the V6-4.0L engine.

Replace a restrictive or failing factory unit with the aFe Power Direct-Fit Front Left Catalytic Converter. This system is engineered as a true bolt-on solution, utilizing factory mounting points, hanger locations, and O2 sensor bungs for a straightforward installation that requires no cutting or welding. Constructed from durable 409 stainless steel with mandrel-bent tubing, this converter ensures improved exhaust flow and long-term corrosion resistance compared to standard replacements.

The unit features 3/8-inch thick laser-cut flanges for a leak-free seal and is 100% MIG welded for maximum structural integrity. Designed to meet federal emissions standards, this 49-state approved converter provides a reliable way to restore vehicle performance and clear emissions-related CEL issues.

• Manufacturer Part Number: 47-46008
• Position: Front Left (Driver's Side)
• Material: 409 Stainless Steel with mandrel-bent tubing
• Flanges: 3/8-inch thick laser-cut flanges for secure fitment
• Construction: 100% hand MIG welded for durability
• Emissions: 49-State Federal Approved (Not for sale or use in California)
• Installation: Direct bolt-on replacement for OE housing

Fits 2019-2024 BMW 330i and 430i models (G20/G22), including xDrive variants. This Dinan Valved Axleback Exhaust System replaces the restrictive factory rear muffler with a high-flow, T304 stainless steel solution designed for precision fitment using factory-style mounting points.

Constructed from brushed T304 stainless steel with TIG welding, this system eliminates hydroformed pipes in favor of smooth, mandrel-bent tubing. The design retains full factory exhaust valve control, allowing for a deep, sporty growl under load while maintaining civility during cruising. To ensure a premium cabin experience, Dinan incorporates drone abatement technologies to minimize resonance. The system is finished with massive 102mm (4") double-walled polished tips, which feature a laser-engraved Dinan logo for a significant visual upgrade over the stock 90mm outlets.

• Manufacturer Part Number: D660-0091
• Construction: 100% T304 Stainless Steel with TIG welding
• Tips: Dual 102mm (4") double-walled, polished clamp-on tips
• Performance Gains: Maximum +4 HP and +3 lb-ft of torque
• Piping Diameter: 85mm to dual 60mm
• Valve Control: Retains factory electronic valve actuator functionality
• Installation: Utilizes factory cut points and mounting hardware
• Features drone abatement technology for improved acoustics

Fits 2018-2023 BMW M550i xDrive Base.

The Dinan High Flow Middle Exhaust replaces the restrictive, hydro-formed factory center section and resonator with a high-flow 3-inch (76mm) T304 stainless steel assembly. By stepping up from the factory 70mm diameter, this mid-section kit significantly reduces backpressure and improves exhaust scavenging. At the heart of the system is a precision mandrel-bent X-pipe, engineered to balance exhaust pulses between cylinder banks for a smoother, fuller tone while eliminating the unwanted sound nuances common in stock configurations.

Designed for a direct bolt-on installation, this kit includes all necessary mounting hardware to mate with your existing system. The deletion of the factory resonator increases exhaust volume and provides a sportier, more aggressive profile without sacrificing the refined character of the G30 M550i.

• 100% T304 stainless steel construction for long-term corrosion resistance
• 3-inch (76mm) mandrel-bent tubing replaces the factory 70mm section for increased flow
• Mandrel-bent X-pipe crossover ensures balanced exhaust pulses and improved scavenging
• Resonator delete design provides a louder, deeper exhaust note
• Full bolt-on installation with all required mounting hardware included
• Manufacturer Part Number: D660-0080

Fits select 2014-2026 BMW (2/3/4/5/6/7/8 Series, X1-X7, Z4, M models, i-series), Mini (Cooper, Clubman, Countryman), and Toyota GR Supra.

Dinan wheel spacers widen your vehicle's track to improve both handling stability and aesthetic stance. These 12mm spacers are precision CNC-machined from high-grade aluminum to ensure exact tolerances and a perfect fit. Each spacer is finished in a durable black anodized coating to resist corrosion and blend seamlessly with your wheel hub assembly. The hub-centric design includes integrated rings to maintain centered alignment, preventing the steering wheel vibration often associated with generic spacers.

Widening the track allows for increased clearance between wheels and suspension or brake components, making these an essential tool for fine-tuning wheel fitment. Note: Installation requires longer wheel bolts, which are sold separately. Please verify your specific thread pitch and seat type before ordering hardware.

• Manufacturer Part Number: D210-2028
• Thickness: 12mm
• Bolt Pattern: 5x112
• Center Bore: 66.5mm
• Construction: CNC-machined aluminum
• Finish: Anodized black
• Quantity: Set of 2 spacers
• Design: Weight-saving hub-centric configuration

Fits select 2014-2026 BMW F and G chassis models with dual electronic exhaust valves, including M2, M3, M4, M5, M8, and X5/X6/X7 SAVs.

The Dinan Dual Exhaust Valve Remote Kit grants you complete manual control over your vehicle's acoustic profile. While factory exhaust valves are programmed to open and close based on complex ECU logic, RPM, and drive mode, this kit overrides those parameters. With the included wireless remote, you can fully open the valves for maximum exhaust note or close them for a quiet, neighbor-friendly cold start.

Built for the harsh environment of the vehicle undercarriage, the system features a weatherproof controller housing. The kit also includes extra-length wiring harnesses, providing the flexibility needed for clean routing and secure mounting regardless of your specific BMW chassis configuration.

• Overrides factory ECU control to manually open or close electronic exhaust valves
• Wirelessly controlled via an included two-button remote
• Weatherproof housing protects internal electronics from road debris and moisture
• Extra-length wiring harnesses for versatile routing and installation
• Directly compatible with BMW dual electronic valve systems
• Manufacturer Part Number: R660-0002

Fits select 2019-2026 BMW 230i, 330i, 430i, M240i, M340i, and M440i models. This Dinan anti-roll bar set is engineered specifically for the G-series chassis to deliver a more responsive and level handling experience. By reducing body roll, these bars maintain a more consistent tire contact patch, increasing mechanical grip and driver confidence through corners without compromising ride quality.

Both bars are manufactured from high-tensile strength alloy steel with a tubular (hollow) design, providing maximum torsional rigidity while minimizing unsprung weight. The rear bar features a 2-hole adjustable design, allowing you to fine-tune the suspension balance for your specific driving environment or comfort preferences. This set includes performance polyurethane bushings and grease for a complete installation.

• Manufacturer Part Number: D120-0630
• Front Sway Bar: 28mm (replaces stock 26.1mm) - 50% stiffer
• Rear Sway Bar: 19mm (replaces stock 17.8mm) - 54-66% stiffer
• Construction: Lightweight tubular alloy steel
• Rear Adjustability: 2-hole adjustable for fine-tuning
• Included Hardware: Polyurethane bushings and specialized grease

Fits select 1997-2004 Chevrolet Corvette, Camaro, and Pontiac Firebird, GTO.

Wiseco Professional Series forged pistons are engineered for high-performance LS builds where rotating assembly strength is critical. Forged from 2618 aluminum alloy, these pistons provide the increased tensile strength required for heavy-duty racing and forced induction applications. The skirts feature Wiseco’s proprietary ArmorGlide coating to reduce friction, minimize scuffing, and ensure quieter operation. Every set includes precision-machined ring grooves and forced pin oiling to ensure constant lubrication and superior ring seal under extreme cylinder pressures.

• Forged from high-strength 2618 aluminum for severe-duty applications
• ArmorGlide skirt coating reduces friction and improves wear resistance
• Precision-machined crown features with forced pin oiling
• Includes high-quality piston rings for optimal seal
• Bore Size: 4.005in
• Compression Height: 1.304in
• Piston Volume: -3.20cc
• Manufacturer Part Number: K398X05

The Wiseco RCS40000 Ring Compressor Sleeve provides a precision solution for installing high-performance pistons and rings without damage. Forged in-house in the USA, this tool features a smooth internal radius that tapers down to a specific 4.000-inch bore size, allowing for the smooth and even compression of the ring pack during assembly.

• Forged construction for superior durability and precision tolerances.
• Hard-anodized and Teflon coated for low friction and long-term wear resistance.
• Tapered design simplifies the installation of high-tension oil rings.
• Laser-marked with size indication for easy identification in the shop.
• Designed for 4.000in bore applications.
• Manufacturer Part Number: RCS40000

Fits 2024 Can-Am Maverick models.

The Wilwood Rear Race Brake Kit (MPN 140-18029) is engineered to meet the extreme thermal demands of competitive UTV racing. By upgrading to 11.60-inch rotors, this system provides significantly greater stopping leverage and heat dissipation compared to factory setups, ensuring consistent pedal feel and reduced brake fade during high-intensity desert or closed-course sessions.

• Rotor Size: 11.60-inch diameter for increased leverage and thermal capacity
• Finish: Durable hard-anodized coating for superior corrosion and wear resistance
• Application: Specifically designed for rear axle race configurations
• Part Number: 140-18029

This kit features high-performance materials designed to withstand the harsh debris and extreme operating temperatures found in off-road racing environments. The hard-anodized finish provides a rugged layer of protection against the elements while maintaining the tight tolerances required for precision braking.

Fits 2016-2023 Toyota Tacoma Limited, SR, SR5, Trail, TRD Off-Road, TRD Pro, and TRD Sport models with the 5.2ft bed.

The Westin EXP Truck Cap provides a high-strength, lightweight cargo solution for the Tacoma. Engineered with a five-piece modular extruded aluminum frame, this cap maximizes durability without the excessive weight of traditional steel or fiberglass shells. It features double-wall aluminum gullwing side doors for convenient access to your gear from either side of the bed, secured by heavy-duty locking T-handles with interior emergency release levers. The system integrates into the factory bed using a no-drill installation process and maintains a tight seal against the elements via an EPDM sponge double-seal gasket.

Designed for overlanding and utility, the EXP cap includes integrated roof rails compatible with major rack systems from Yakima, Thule, and Front Runner. The interior features T-slot extrusions for mounting custom tool setups or storage accessories, while the rear door offers auto lock/unlock functionality for seamless accessibility.

• Manufacturer Part Number: 16-11065
• Construction: 5-piece modular extruded aluminum
• Finish: Textured black powder coat
• Load Rating: 300 lbs dynamic / 700 lbs static
• Doors: Double-wall aluminum gullwing side doors
• Hardware: Locking T-handles with internal emergency release
• Weatherproofing: EPDM sponge double seal
• Rack Compatibility: Yakima TrackTower/Skyline, Thule Rapid Podium, Front Runner Canopy Load Bar Kit
• Installation: No-drill, vehicle-specific mounting hardware included

Fits 2019-2023 Ford Ranger (Lariat, XL, XLT).

The Westin E-Series Bull Bar adds a layer of front-end protection and a customized look to your Ford Ranger. Engineered from 3-inch diameter polished stainless steel tubing, this bull bar is built to withstand road debris while maintaining a mirror-like finish. It features a fully welded cross tube for superior structural integrity and an integrated brushed stainless steel skid plate with a signature die-cut Westin logo. Designed for a direct bolt-on installation, it mounts to the factory mounting points on the vehicle frame, requiring no drilling or permanent modification.

• Constructed from 3-inch diameter polished stainless steel tubing
• Brushed stainless steel skid plate for lower front-end protection
• Includes two mounting points for auxiliary lights up to 6 inches in diameter
• Fully welded cross tube for maximum durability
• No-drill installation utilizing existing vehicle frame mounting points
• Complete vehicle-specific mounting kit included
• Manufacturer Part Number: 31-3980

Optional 20-inch LED light mounting brackets (Part No. 32-0045) and license plate re-locator (Part No. 32-0055) are available and sold separately.

Finish your wheel assembly with a genuine Weld Drag Sport Forged (DFS) series center cap. This replacement cap is designed to protect the hub and spindle while completing the high-end look of your 5-lug drag wheels. Precision-machined to match the tolerances of your Weld wheels, it ensures a secure fit that won't vibrate loose during high-speed passes.

• Manufacturer Part Number: P605-5083
• Series: Drag Sport Forged (DFS)
• Finish: Polished
• Outer Diameter: 3.16 inches
• Height: 3.20 inches
• Lug Pattern Compatibility: 5-Lug

Constructed from high-quality materials to resist corrosion and maintain its polished luster, this cap is an essential component for both street and strip applications where aesthetics and hub protection are equally important.

The Vossen HFX-1 utilizes advanced hybrid forged construction to deliver a high-strength, lightweight wheel designed specifically for the truck and SUV market. This 18x9 wheel features a sophisticated split-spoke design and a premium Tinted Gloss Black finish that provides a sleek, custom appearance while maintaining the durability needed for daily driving and light off-road use.

Engineered with a Super Deep concave profile, the HFX-1 adds significant visual depth and an aggressive stance to your vehicle. The 6x139.7 bolt pattern and 106.1mm center bore ensure compatibility with a wide range of popular 6-lug platforms, offering a precise fit and reliable performance.

• Series: HFX-1
• Size: 18x9
• Bolt Pattern: 6x139.7
• Offset: ET0
• Concavity: Super Deep
• Center Bore: 106.1 mm
• Finish: Tinted Gloss Black
• Manufacturer Part Number: HFX1-8G83

Fits select 2005-2025 Chrysler 300, Dodge Challenger, Charger, Durango, Magnum, Jeep Commander, Grand Cherokee, and Wrangler.

This MAHLE Original water pump gasket provides a reliable, precision-engineered seal to prevent coolant leaks and maintain proper engine temperature. Designed to meet or exceed original equipment specifications, it is a direct replacement for the factory gasket, ensuring a perfect fit between the water pump and the engine block during service or overhaul.

A compromised water pump gasket can lead to rapid coolant loss, overheating, and potential engine damage. MAHLE gaskets are manufactured using high-grade materials to withstand the thermal cycling and pressure of modern cooling systems, providing long-term durability for high-performance and daily-driven applications alike.

• Direct replacement for a secure, leak-free seal
• Manufactured to OEM-quality standards for fit and function
• Essential for water pump replacements or cooling system repairs
• Manufacturer Part Number: K31777

The Turbosmart FPRF8 (TS-0404-1532) streamlines your fuel system by integrating a high-performance fuel pressure regulator with a built-in fuel filter into a single, CNC-machined unit. This dual-function design reduces plumbing complexity, minimizes potential leak points, and saves valuable engine bay space. Engineered for high-flow applications, the FPRF8 maintains a precise 1:1 manifold pressure ratio, ensuring your fuel rails receive stable, filtered pressure even under heavy load and high boost conditions.

• CNC-machined from 6061-T6 billet aluminum with a durable black anodized finish.
• Compatible with gasoline, E85, and methanol fuel types for versatile performance.
• Includes an internal, replaceable stainless steel filter element to protect injectors from contaminants.
• Features -8AN inlet, outlet, and return ports for high-volume fuel flow.
• Equipped with a 1/8" NPT gauge port for easy pressure monitoring and a vacuum reference port.
• Simplified 2-in-1 architecture replaces the need for separate inline filters and regulators.
• Manufacturer Part Number: TS-0404-1532.

The Toyo Proxes Sport R is an ultra-high performance (UHP) summer tire designed for enthusiasts who require maximum grip and steering precision. Engineered with a high-grip silica tread compound, it provides exceptional adhesion to the road surface in both dry and wet conditions. The asymmetrical tread pattern features stiff ribs to minimize block deformation under high lateral forces, ensuring stable cornering and responsive handling at high speeds. This XL (Extra Load) rated tire is built to maintain structural integrity under the increased stresses of modern performance vehicles.

• Size: 285/35ZR19
• Load Index: 103 (1,929 lbs)
• Speed Rating: W (168 mph)
• Load Range: XL (Extra Load)
• Part Number: 178380
• Season: Summer / Ultra-High Performance