The ARB Air Locker Seal Housing Kit (081501SP) is a critical service component designed to maintain the pneumatic integrity of your locking differential. This kit is used to replace worn or damaged seal housings that may cause air leaks, ensuring your locker engages reliably when you need traction most.

Precision-engineered to meet ARB's strict tolerances for off-road performance, this kit includes the specific 81/93 housing and the necessary O-rings to create a dependable, leak-free seal. It is a vital part for routine differential maintenance or for repairing lockers showing signs of pressure loss.

• Direct replacement ARB service part
• Includes 81/93 seal housing and required O-rings
• Restores reliable pneumatic engagement of the Air Locker
• Durable construction for long-term off-road use
• Manufacturer Part Number: 081501SP

This ARB Air Locker Seal Housing Retaining Clip is a genuine replacement component designed to maintain the integrity of your differential's air system. It functions as a secure locking mechanism, holding the seal housing firmly against the bearing journal to ensure the internal O-rings maintain a consistent, leak-free seal during locker engagement.

Constructed from high-quality spring steel, this clip is engineered to withstand the rotational forces and heat cycles found within a high-performance differential. Whether you are performing a routine inspection, replacing O-rings, or completing a full Air Locker rebuild, using a fresh retaining clip prevents play in the seal housing that could lead to air leaks and intermittent locking performance.

• Genuine ARB spare part designed specifically for Air Locker seal housings
• Manufactured from durable spring steel for consistent tension and fitment
• Crucial for maintaining a leak-free pneumatic connection within the differential
• Replaces damaged, bent, or lost factory clips during service or installation

Fits select 1998-2009 Buick, Cadillac, Chevrolet, Chrysler, Dodge, GMC, Isuzu, and Ram vehicles.

The Yukon Gear Transfer Case Rear Seal is a precision-engineered replacement component designed to prevent fluid leaks at the rear output shaft of your drivetrain. This seal ensures that transfer case lubricant remains contained, protecting internal gears and bearings from heat and friction damage caused by low fluid levels. Manufactured to meet or exceed original equipment specifications, it provides a reliable, direct-fit solution for maintaining your vehicle's New Process or New Venture transfer case.

• Direct replacement for the rear output shaft seal to stop or prevent leaks
• Compatible with NP126, NP136, NP146, NP236, NP246, NP261, and NP263 transfer case models
• Helps maintain critical lubrication levels for drivetrain longevity
• Built with durable materials to withstand the temperature and chemical demands of transfer case fluid
• Manufacturer Part Number: ZTSEA22507TTO

Fits select 1966-2006 Jeep, Ford, Volvo, and American Motors vehicles equipped with a Dana 30 or AMC Model 35 differential. This genuine Yukon Gear & Axle seal housing is a direct replacement component for the Yukon Zip Locker air-operated traction system.

As the interface for air delivery within the differential, the seal housing is critical for maintaining the pressure required to switch from an open carrier to 100% lockup. This assembly ensures the air-actuated piston operates smoothly and remains leak-free under high-torque off-road conditions. Each housing is precision-machined for exact fitment and includes the necessary O-rings to restore your locking differential to peak performance.

• Manufacturer Part Number: YZLASH-02
• Designed specifically for Yukon Zip Locker air lockers
• Compatible with Dana Spicer 30 and AMC Model 35 differentials
• Includes high-quality O-rings for a reliable air-tight seal
• Precision-machined steel construction for durability

Fits select 1967-2015 Chevrolet and GMC trucks, SUVs, and vans equipped with GM 10.5-inch or 11.5-inch 14-bolt rear axles.

The Yukon Gear YY GM26060977 adapter sleeve is a specialized solution for upgrading GM heavy-duty yokes to utilize modern triple lip pinion seals. This precision-machined sleeve installs onto the yoke to provide a fresh, smooth sealing surface, which is critical when the original yoke surface has become grooved or worn over time. By converting to a triple-lip seal design, you enhance the axle's protection against dirt, water, and debris while ensuring a superior oil-tight seal for the differential.

• Converts GM 10.5" and 11.5" 14-bolt truck yokes to triple lip seal compatibility
• Provides a precision-ground sealing surface to restore worn yokes
• Enhances durability in heavy-duty towing and off-road applications
• Direct fit for Chevrolet/GMC 14-bolt 10.5" and 11.5" axle configurations
• Manufacturer Part Number: YY GM26060977

Fits select 1980-2014 Buick, Cadillac, Chevrolet, and GMC vehicles with 8.6-inch and 9.5-inch differentials.

The Yukon Gear YY GM26060975 Adapter Sleeve is engineered to adapt standard pinion yokes to accept late-model triple lip pinion seals. This sleeve provides a precision-fit sealing surface, allowing owners of older GM 8.6" and 9.5" rear ends to take advantage of the superior fluid retention and debris exclusion offered by modern triple-lip seal technology.

• Adapts standard yokes for use with late-model triple lip pinion seals
• Compatible with GM 8.6-inch and 9.5-inch differential applications
• Ensures a leak-free seal between the yoke and housing
• Precision-manufactured for exact fitment on factory and performance yokes
• Manufacturer Part Number: YY GM26060975

Fits 1963-1979 Chevrolet Corvette models including Base, Stingray, and Pace Car editions.

The Yukon Gear & Axle Mighty Seal is engineered to provide a precision, leak-proof fit for the rear differential side yoke on C2 and C3 Corvettes. These seals utilize modern manufacturing technologies to ensure a tighter fit than standard replacements, effectively preventing differential fluid leaks at the stub axle interface. This is a critical component for maintaining the lubrication and longevity of your Corvette's independent rear suspension drivetrain.

• Direct replacement for the side yoke stub axle seal
• Precision-manufactured for long-term durability and heat resistance
• Designed to meet or exceed OE specifications for fitment and sealing
• Protects rear differential internals by maintaining fluid levels
• Manufacturer Part Number: YMSG1016

Fits 2018 Jeep Wrangler and Wrangler JK Rubicon and Unlimited Rubicon models.

Yukon Mighty Seals are engineered using state-of-the-art design software to ensure a precision fit that provides a reliable, long-lasting seal for your drivetrain. These small parts are built to deliver consistent performance, replacing worn factory seals to prevent leaks and protect your differential internals. This specific seal is designed for the 220 mm rear pinion found in select Dana 44 applications.

• Manufacturer Part Number: YMSC1029
• Seal Surface Diameter: 2.126 in.
• Outer Diameter: 3.393 in.
• Application: 220 mm Rear Pinion Seal
• Engineered for precise fitment and durability

Fits select 2003-2012 Dodge and Ram 1500, 2500, and 3500 trucks equipped with the 9.25-inch AAM front solid axle.

Yukon Mighty Seals are engineered using the latest manufacturing technologies to ensure a precision fit and a reliable, long-lasting seal. This pinion seal is a critical component for maintaining your front differential, preventing gear oil leaks and protecting internal components from road grime and moisture. Whether you are performing a gear swap or standard maintenance, these seals are designed to match the specific tolerances of the 9.25" AAM housing.

• Specifically designed for the Chrysler 9.25-inch AAM front solid axle
• Precision fitment to prevent differential fluid leaks
• High-quality construction for extended service life in demanding conditions
• Manufacturer Part Number: YMSC1008

Fits select 1967-1973 Ford Mustang, Fairlane, Ranchero, Gran Torino, Lincoln Continental, and Mercury Cougar and Comet models equipped with the Ford 9-inch rear differential.

Yukon Mighty Seals are engineered using modern design and manufacturing technologies to provide a precision fit that exceeds original equipment standards. This rear axle seal is specifically designed for 31-spline applications, ensuring a tight seal against the axle shaft to prevent gear oil leaks that can contaminate brake components and lead to premature bearing failure. Whether you are restoring a classic Mustang or maintaining a vintage Ranchero, these seals provide the durability needed for long-term service.

• Engineered for Ford 9-inch rear ends with 31-spline axles
• Compatible with 1.500-inch axle shaft diameters
• 2.264-inch outside diameter (OD) for a secure housing fit
• High-quality construction for superior fluid retention and debris exclusion
• Manufacturer Part Number: YMS9363S

Fits select 1965-2002 Chevrolet, GMC, Ford, and Dodge vehicles equipped with Dana 44HD, 60, 70, 70U, and 70HD differentials.

Yukon Mighty Seals are engineered to provide a precision fit that stops leaks and protects your drivetrain from gear oil loss and contaminant entry. These high-quality replacement pinion seals utilize the latest manufacturing technologies and materials to ensure a tight, long-lasting seal that withstands the high temperatures and pressures common in heavy-duty axle applications.

• Direct fit for Dana Spicer 44HD, 60, 70, 70U, and 70HD differential housings
• Precision-manufactured to modern tolerances for a leak-free installation
• Constructed with high-grade sealing materials for extended service life
• Designed for easy installation into factory or aftermarket Dana housings
• Manufacturer Part Number: YMS9316

Fits select 1964-2003 Buick, Chevrolet, GMC, Oldsmobile, and Pontiac vehicles with GM 7.2-inch IFS, 7.5-inch, 7.625-inch, and 8.2-inch differentials.

The Yukon Gear Mighty Seals Pinion Seal is engineered using the latest design and manufacturing technologies to provide a precision fit that effectively keeps gear oil in and contaminants out. Designed for long-term durability and resistance to wear, this seal is a direct replacement for worn factory units in a wide range of GM car and truck applications. By maintaining a tight seal at the pinion yoke, it prevents fluid loss that can lead to overheating and gear failure.

• Manufacturer Part Number: YMS8610
• Fits GM 7.2 in. IFS, 7.5 in., 7.625 in., and 8.2 in. differentials
• Outside Diameter (OD): 2.660 in.
• Precision-engineered for superior sealing performance and extended service life
• Replaces worn OE seals to prevent leaks and protect drivetrain components

Fits select 1960-2011 Chrysler, Dodge, Jeep, and Plymouth vehicles with 7.25-inch or 8.25-inch differentials (5.9L).

The Yukon Gear YMS8516N Mighty Seal is engineered for technicians and enthusiasts who require a dependable, leak-free seal for Chrysler 7.25" and 8.25" rear ends. Utilizing advanced manufacturing technologies, this pinion seal provides a precision fit that maintains its integrity under varied driving conditions, preventing lubricant loss and protecting your ring and pinion set from contamination and premature wear. Whether you are restoring a classic B-body or maintaining a late-model Ram, this seal ensures the housing remains oil-tight.

• Manufacturer Part Number: YMS8516N
• Designed for Chrysler 7.25" and 8.25" differential housings
• Precision-fit construction for long-term leak prevention
• High-grade materials resist thermal degradation and friction
• Direct replacement for worn OE pinion seals