Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Welcome to Atlus Automotive
Main menu
-
Performance
- Performance
-
Intake & Exhaust
- Intake & Exhaust
- Air Intake Systems
- Cold Air Intakes
- Air Intake Components
- Air Filters
- Air Filters - Drop In
- Air Filters - Direct Fit
- Air Filters - Universal Fit
- Pre-Filters
- Recharge Kits
- OE Replacement Air Intake Components
- Exhaust, Mufflers & Tips
- Catback
- Axle Back
- Muffler
- Tips
- Headers & Manifolds
- Connecting Pipes
- Catalytic Converter Direct Fit
- Catalytic Converter Universal
- Exhaust Collector
- Merge Collectors
-
Engine Upgrades
- Engine Upgrades
- Engine Components
- Camshafts
- Valve Springs, Retainers
- Head Gaskets
- Head Stud & Bolt Kits
- Main Stud & Bolt Kits
- Gasket Kits
- Engine Mounts
- Oil Catch Cans
- Oil Separators
- Throttle Bodies
- Throttle Body Spacers
- Crankshaft Dampers
- Valves
- Piston Rings
- Piston Sets - Forged - 4cyl
- Piston Sets - Cast - 4cyl
- Connecting Rods - 4Cyl
- Rotating Assemblies
- Stroker Kits
-
Turbo & Cooling
-
Fuel, Ignition & Tuning
-
Suspension & Handling
- Suspension & Handling
-
Lowering & Coilovers
-
Arms, Links & Alignment
-
Lift & Off-Road Suspension
-
Chassis & Bracing
-
Wheels & Tires
- Wheels & Tires
-
Wheels
-
Tires
-
Drivetrain & Clutch
-
Brakes
- Brakes
-
Pads & Rotors
-
Brake Kits & Calipers
-
Lines, Fluid & Hardware
-
Exterior & Lighting
- Exterior & Lighting
-
Lighting
-
Exterior Styling
-
Bumpers & Protection
-
Interior & Electronics
- Interior & Electronics
-
Interior Upgrades
-
Gauges & Electronics
-
Audio & Safety
-
Overland & Utility
- Overland & Utility
-
Bed Covers & Bed Gear
-
Steps, Racks & Storage
-
Trail & Towing
-
Maintenance & Garage
- Maintenance & Garage
-
Oil, Fluids & Filters
-
Detailing & Car Care
-
Tools & Fabrication
Your cart
Choose your Location
-
Atlus
1340 Cobb Dr, Unit 1, Eustis, FL 32736
352-234-4458
Mon – Fri: 8:30 am – 4:30 pm
Sat: 9:00 am – 2:00 pm
Sun: Closed
Product Comparison
How they are Different
|
__ __ |
|
|---|---|
| Description |
Description - __ |
| Rating |
Rating - __ |
| Vendor |
Vendor - __ |
| Color |
Color - __ |
|
|
Compare products ( / )
25001 products
25001 products
Sort by:
- Featured
- Most relevant
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
$155.55
Brembo's UV Coated rotors are developed as direct replacement that meets or exceeds OEM specifications. Environmentally friendly, the solvent free UV coating offers superior protection of the disc, including braking plate surfaces. High Carbon cast iron, where applicable, minimizes noise and vibration and provides maximum performance and enhanced driving comfort. Included with the UV Coated rotors is a fixing screw kit with all the necessary hardware for simple and worry free installation. New intelligent marking location show part number & the minimum thickness. In order to optimize and restore braking performance rotors and pads should be replaced together. Pair your UV Coated rotor with Brembo's NAO/Ceramic or Low Met brake pad formulations. Brembo, the most trusted brand in braking.
- Total control over the entire process
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2019-2022 | Mercedes-Benz | CLS450 | 4Matic |
| 2019-2021 | Mercedes-Benz | CLS450 | Base |
| 2019-2021 | Mercedes-Benz | CLS53 AMG | 4Matic |
| 2018 | Mercedes-Benz | E400 | 4Matic |
| 2018 | Mercedes-Benz | E400 | Base |
| 2017-2018 | Mercedes-Benz | E43 AMG | 4Matic |
| 2019-2022 | Mercedes-Benz | E450 | 4Matic |
| 2019-2022 | Mercedes-Benz | E450 | Base |
| 2019-2022 | Mercedes-Benz | E53 AMG | 4Matic |
$108.79
Brembo's UV Coated rotors are developed as direct replacement that meets or exceeds OEM specifications. Environmentally friendly, the solvent free UV coating offers superior protection of the disc, including braking plate surfaces. High Carbon cast iron, where applicable, minimizes noise and vibration and provides maximum performance and enhanced driving comfort. Included with the UV Coated rotors is a fixing screw kit with all the necessary hardware for simple and worry free installation. New intelligent marking location show part number & the minimum thickness. In order to optimize and restore braking performance rotors and pads should be replaced together. Pair your UV Coated rotor with Brembo's NAO/Ceramic or Low Met brake pad formulations. Brembo, the most trusted brand in braking.
- Total control over the entire process
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2019 | Jaguar | XE | 300 Sport |
| 2017-2019 | Jaguar | XE | Base |
| 2017 | Jaguar | XE | First Edition |
| 2019 | Jaguar | XE | Landmark Edition |
| 2018-2019 | Jaguar | XE | Portfolio |
| 2017-2019 | Jaguar | XE | Premium |
| 2017-2019 | Jaguar | XE | Prestige |
| 2020 | Jaguar | XE | R-Dynamic S |
| 2017-2019 | Jaguar | XE | R-Sport |
| 2018-2020 | Jaguar | XE | S |
| 2019 | Jaguar | XE | SV Project 8 |
| 2019 | Jaguar | XF | 300 Sport |
| 2017-2018 | Jaguar | XF | Base |
| 2020 | Jaguar | XF | Checkered Flag |
| 2018-2019 | Jaguar | XF | Portfolio |
| 2016-2020 | Jaguar | XF | Premium |
| 2016-2020 | Jaguar | XF | Prestige |
| 2021-2024 | Jaguar | XF | R-Dynamic SE |
| 2016-2018 | Jaguar | XF | R-Sport |
| 2016-2023 | Jaguar | XF | S |
| 2021-2023 | Jaguar | XF | SE |
| 2018 | Jaguar | XF | Sportbrake First Edition |
| 2019-2020 | Jaguar | XF | Sportbrake Prestige |
| 2018-2020 | Jaguar | XF | Sportbrake S |
$127.21
Brembo's UV Coated rotors are developed as direct replacement that meets or exceeds OEM specifications. Environmentally friendly, the solvent free UV coating offers superior protection of the disc, including braking plate surfaces. High Carbon cast iron, where applicable, minimizes noise and vibration and provides maximum performance and enhanced driving comfort. Included with the UV Coated rotors is a fixing screw kit with all the necessary hardware for simple and worry free installation. New intelligent marking location show part number & the minimum thickness. In order to optimize and restore braking performance rotors and pads should be replaced together. Pair your UV Coated rotor with Brembo's NAO/Ceramic or Low Met brake pad formulations. Brembo, the most trusted brand in braking.
- Total control over the entire process
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2019-2023 | Porsche | Cayenne | Base |
| 2020-2023 | Porsche | Cayenne | Coupe |
| 2023 | Porsche | Cayenne | Coupe Platinum Edition |
| 2019-2023 | Porsche | Cayenne | E-Hybrid |
| 2020-2023 | Porsche | Cayenne | E-Hybrid Coupe |
| 2023 | Porsche | Cayenne | E-Hybrid Coupe Platinum Edition |
| 2023 | Porsche | Cayenne | E-Hybrid Platinum Edition |
| 2021-2023 | Porsche | Cayenne | GTS |
| 2021-2023 | Porsche | Cayenne | GTS Coupe |
| 2022-2023 | Porsche | Cayenne | Platinum Edition |
| 2019-2023 | Porsche | Cayenne | S |
| 2020-2023 | Porsche | Cayenne | S Coupe |
| 2023 | Porsche | Cayenne | S Coupe Platinum Edition |
| 2022-2023 | Porsche | Cayenne | S Platinum Edition |
| 2019-2023 | Porsche | Cayenne | Turbo |
| 2020-2023 | Porsche | Cayenne | Turbo Coupe |
| 2022-2023 | Porsche | Cayenne | Turbo GT Coupe |
| 2020-2023 | Porsche | Cayenne | Turbo S E-Hybrid |
| 2020-2023 | Porsche | Cayenne | Turbo S E-Hybrid Coupe |
| 2017-2024 | Porsche | Panamera | 4 |
| 2018-2023 | Porsche | Panamera | 4 E-Hybrid |
| 2018-2023 | Porsche | Panamera | 4 E-Hybrid Executive |
| 2022-2023 | Porsche | Panamera | 4 E-Hybrid Platinum Edition |
| 2018-2023 | Porsche | Panamera | 4 E-Hybrid Sport Turismo |
| 2017-2023 | Porsche | Panamera | 4 Executive |
| 2022-2023 | Porsche | Panamera | 4 Platinum Edition |
| 2018-2023 | Porsche | Panamera | 4 Sport Turismo |
| 2017-2023 | Porsche | Panamera | 4S |
| 2021-2023 | Porsche | Panamera | 4S E-Hybrid |
| 2021-2023 | Porsche | Panamera | 4S E-Hybrid Executive |
| 2021-2023 | Porsche | Panamera | 4S E-Hybrid Sport Turismo |
| 2017-2023 | Porsche | Panamera | 4S Executive |
| 2018-2023 | Porsche | Panamera | 4S Sport Turismo |
| 2017-2024 | Porsche | Panamera | Base |
| 2019-2023 | Porsche | Panamera | GTS |
| 2019-2023 | Porsche | Panamera | GTS Sport Turismo |
| 2022-2023 | Porsche | Panamera | Platinum Edition |
| 2017-2020 | Porsche | Panamera | Turbo |
| 2017-2020 | Porsche | Panamera | Turbo Executive |
| 2021-2023 | Porsche | Panamera | Turbo S |
| 2018-2023 | Porsche | Panamera | Turbo S E-Hybrid |
| 2018-2023 | Porsche | Panamera | Turbo S E-Hybrid Executive |
| 2018-2023 | Porsche | Panamera | Turbo S E-Hybrid Sport Turismo |
| 2021-2023 | Porsche | Panamera | Turbo S Executive |
| 2021-2023 | Porsche | Panamera | Turbo S Sport Turismo |
| 2018-2020 | Porsche | Panamera | Turbo Sport Turismo |
$110.96
Brembo's UV Coated rotors are developed as direct replacement that meets or exceeds OEM specifications. Environmentally friendly, the solvent free UV coating offers superior protection of the disc, including braking plate surfaces. High Carbon cast iron, where applicable, minimizes noise and vibration and provides maximum performance and enhanced driving comfort. Included with the UV Coated rotors is a fixing screw kit with all the necessary hardware for simple and worry free installation. New intelligent marking location show part number & the minimum thickness. In order to optimize and restore braking performance rotors and pads should be replaced together. Pair your UV Coated rotor with Brembo's NAO/Ceramic or Low Met brake pad formulations. Brembo, the most trusted brand in braking.
- Total control over the entire process
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2012 | Volkswagen | CC | Executive |
| 2012 | Volkswagen | CC | Lux |
| 2012 | Volkswagen | CC | Lux Limited |
| 2012 | Volkswagen | CC | Lux Plus |
| 2009-2011 | Volkswagen | CC | Luxury |
| 2011-2012 | Volkswagen | CC | R-Line |
| 2009-2012 | Volkswagen | CC | Sport |
| 2009-2010 | Volkswagen | CC | VR6 |
| 2009-2011 | Volkswagen | CC | VR6 4Motion |
| 2009-2010 | Volkswagen | CC | VR6 Sport |
| 2010-2013 | Volkswagen | Golf | Base |
| 2006 | Volkswagen | Golf | GL |
| 2006 | Volkswagen | Golf | GLS |
| 2006 | Volkswagen | Golf | GLS TDI |
| 2006 | Volkswagen | Golf | GTI 1.8T |
| 2010-2013 | Volkswagen | Golf | TDI |
| 2012-2013 | Volkswagen | Golf R | Base |
| 2008-2013 | Volkswagen | GTI | Base |
| 2014 | Volkswagen | GTI | Driver's Edition |
| 2014 | Volkswagen | GTI | Wolfsburg Edition |
| 2006-2007 | Volkswagen | Passat | 2.0T |
| 2006-2007 | Volkswagen | Passat | 3.6 |
| 2008-2010 | Volkswagen | Passat | Komfort |
| 2008 | Volkswagen | Passat | Lux |
| 2008 | Volkswagen | Passat | Turbo |
| 2006-2007 | Volkswagen | Passat | Value Edition |
| 2008 | Volkswagen | Passat | VR6 |
| 2007 | Volkswagen | Passat | Wolfsburg Edition |
| 2008 | Volkswagen | R32 | Base |
| 2006-2007 | Volkswagen | Rabbit | 2.5 |
| 2008-2009 | Volkswagen | Rabbit | S |
$108.01
Brembo's UV Coated rotors are developed as direct replacement that meets or exceeds OEM specifications. Environmentally friendly, the solvent free UV coating offers superior protection of the disc, including braking plate surfaces. High Carbon cast iron, where applicable, minimizes noise and vibration and provides maximum performance and enhanced driving comfort. Included with the UV Coated rotors is a fixing screw kit with all the necessary hardware for simple and worry free installation. New intelligent marking location show part number & the minimum thickness. In order to optimize and restore braking performance rotors and pads should be replaced together. Pair your UV Coated rotor with Brembo's NAO/Ceramic or Low Met brake pad formulations. Brembo, the most trusted brand in braking.
- Total control over the entire process
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2004 | Porsche | 911 | 40th Anniversary Edition |
| 1999-2008 | Porsche | 911 | Carrera |
| 1999-2004,2006-2008 | Porsche | 911 | Carrera 4 |
| 2006-2007 | Porsche | 911 | Carrera 4S |
| 2005-2007 | Porsche | 911 | Carrera S |
| 2007 | Porsche | 911 | GT3 |
| 2007 | Porsche | 911 | GT3 RS |
| 2002 | Porsche | 911 | Targa |
| 2007-2008 | Porsche | 911 | Targa 4 |
| 2007 | Porsche | 911 | Targa 4S |
| 2001,2007 | Porsche | 911 | Turbo |
| 2004-2012 | Porsche | Boxster | Base |
| 2008 | Porsche | Boxster | Limited Edition |
| 2000-2003 | Porsche | Boxster | Roadster |
| 2000-2003 | Porsche | Boxster | Roadster S |
| 2008 | Porsche | Boxster | RS 60 Spyder |
| 2004-2012 | Porsche | Boxster | S |
| 2012 | Porsche | Boxster | S Black Edition |
| 2008 | Porsche | Boxster | S Limited Edition |
| 2009 | Porsche | Boxster | S Porsche Design 2 |
| 2004 | Porsche | Boxster | S Special Edition |
| 2011-2012 | Porsche | Boxster | Spyder |
| 2007-2012 | Porsche | Cayman | Base |
| 2012 | Porsche | Cayman | R |
| 2006-2012 | Porsche | Cayman | S |
$96.36
Brembo's UV Coated rotors are developed as direct replacement that meets or exceeds OEM specifications. Environmentally friendly, the solvent free UV coating offers superior protection of the disc, including braking plate surfaces. High Carbon cast iron, where applicable, minimizes noise and vibration and provides maximum performance and enhanced driving comfort. Included with the UV Coated rotors is a fixing screw kit with all the necessary hardware for simple and worry free installation. New intelligent marking location show part number & the minimum thickness. In order to optimize and restore braking performance rotors and pads should be replaced together. Pair your UV Coated rotor with Brembo's NAO/Ceramic or Low Met brake pad formulations. Brembo, the most trusted brand in braking.
- Total control over the entire process
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2014-2019 | Mercedes-Benz | CLA250 | 4Matic |
| 2014-2019 | Mercedes-Benz | CLA250 | Base |
| 2015-2020 | Mercedes-Benz | GLA250 | 4Matic |
| 2015-2020 | Mercedes-Benz | GLA250 | Base |
$75.50
Brembo's UV Coated rotors are developed as direct replacement that meets or exceeds OEM specifications. Environmentally friendly, the solvent free UV coating offers superior protection of the disc, including braking plate surfaces. High Carbon cast iron, where applicable, minimizes noise and vibration and provides maximum performance and enhanced driving comfort. Included with the UV Coated rotors is a fixing screw kit with all the necessary hardware for simple and worry free installation. New intelligent marking location show part number & the minimum thickness. In order to optimize and restore braking performance rotors and pads should be replaced together. Pair your UV Coated rotor with Brembo's NAO/Ceramic or Low Met brake pad formulations. Brembo, the most trusted brand in braking.
- Total control over the entire process
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2015 | Mercedes-Benz | ML250 | Bluetec 4Matic |
| 2012 | Mercedes-Benz | ML350 | 4Matic |
| 2012 | Mercedes-Benz | ML350 | Bluetec 4Matic |
| 2012-2013 | Mercedes-Benz | ML550 | Base |
$110.36
Brembo's UV Coated rotors are developed as direct replacement that meets or exceeds OEM specifications. Environmentally friendly, the solvent free UV coating offers superior protection of the disc, including braking plate surfaces. High Carbon cast iron, where applicable, minimizes noise and vibration and provides maximum performance and enhanced driving comfort. Included with the UV Coated rotors is a fixing screw kit with all the necessary hardware for simple and worry free installation. New intelligent marking location show part number & the minimum thickness. In order to optimize and restore braking performance rotors and pads should be replaced together. Pair your UV Coated rotor with Brembo's NAO/Ceramic or Low Met brake pad formulations. Brembo, the most trusted brand in braking.
- Total control over the entire process
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2012 | Land Rover | Range Rover | Autobiography |
| 2010-2012 | Land Rover | Range Rover | Supercharged |
$105.26
Brembo's UV Coated rotors are developed as direct replacement that meets or exceeds OEM specifications. Environmentally friendly, the solvent free UV coating offers superior protection of the disc, including braking plate surfaces. High Carbon cast iron, where applicable, minimizes noise and vibration and provides maximum performance and enhanced driving comfort. Included with the UV Coated rotors is a fixing screw kit with all the necessary hardware for simple and worry free installation. New intelligent marking location show part number & the minimum thickness. In order to optimize and restore braking performance rotors and pads should be replaced together. Pair your UV Coated rotor with Brembo's NAO/Ceramic or Low Met brake pad formulations. Brembo, the most trusted brand in braking.
- Total control over the entire process
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2006 | Land Rover | LR3 | Base |
| 2005-2009 | Land Rover | LR3 | HSE |
| 2009 | Land Rover | LR3 | HSE Lux |
| 2005-2008 | Land Rover | LR3 | SE |
| 2006-2009 | Land Rover | Range Rover Sport | HSE |
| 2008 | Land Rover | Range Rover Sport | LE |
| 2006-2009 | Land Rover | Range Rover Sport | Supercharged |
$97.83
Brembo's UV Coated rotors are developed as direct replacement that meets or exceeds OEM specifications. Environmentally friendly, the solvent free UV coating offers superior protection of the disc, including braking plate surfaces. High Carbon cast iron, where applicable, minimizes noise and vibration and provides maximum performance and enhanced driving comfort. Included with the UV Coated rotors is a fixing screw kit with all the necessary hardware for simple and worry free installation. New intelligent marking location show part number & the minimum thickness. In order to optimize and restore braking performance rotors and pads should be replaced together. Pair your UV Coated rotor with Brembo's NAO/Ceramic or Low Met brake pad formulations. Brembo, the most trusted brand in braking.
- Total control over the entire process
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2000-2001 | Mercedes-Benz | ML430 | Base |
| 2002-2005 | Mercedes-Benz | ML500 | Base |
| 2000-2003 | Mercedes-Benz | ML55 AMG | Base |
$43.71
Brembo's UV Coated rotors are developed as direct replacement that meets or exceeds OEM specifications. Environmentally friendly, the solvent free UV coating offers superior protection of the disc, including braking plate surfaces. High Carbon cast iron, where applicable, minimizes noise and vibration and provides maximum performance and enhanced driving comfort. Included with the UV Coated rotors is a fixing screw kit with all the necessary hardware for simple and worry free installation. New intelligent marking location show part number & the minimum thickness. In order to optimize and restore braking performance rotors and pads should be replaced together. Pair your UV Coated rotor with Brembo's NAO/Ceramic or Low Met brake pad formulations. Brembo, the most trusted brand in braking.
- Total control over the entire process
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021 | Mazda | 6 | Carbon Edition |
| 2014-2021 | Mazda | 6 | Grand Touring |
| 2018-2021 | Mazda | 6 | Grand Touring Reserve |
| 2018-2021 | Mazda | 6 | Signature |
| 2014-2021 | Mazda | 6 | Sport |
| 2014-2021 | Mazda | 6 | Touring |
$63.00
Brembo's UV Coated rotors are developed as direct replacement that meets or exceeds OEM specifications. Environmentally friendly, the solvent free UV coating offers superior protection of the disc, including braking plate surfaces. High Carbon cast iron, where applicable, minimizes noise and vibration and provides maximum performance and enhanced driving comfort. Included with the UV Coated rotors is a fixing screw kit with all the necessary hardware for simple and worry free installation. New intelligent marking location show part number & the minimum thickness. In order to optimize and restore braking performance rotors and pads should be replaced together. Pair your UV Coated rotor with Brembo's NAO/Ceramic or Low Met brake pad formulations. Brembo, the most trusted brand in braking.
- Total control over the entire process
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2016-2022 | Mercedes-Benz | Metris | Base |
$33.51
Brembo's UV Coated rotors are developed as direct replacement that meets or exceeds OEM specifications. Environmentally friendly, the solvent free UV coating offers superior protection of the disc, including braking plate surfaces. High Carbon cast iron, where applicable, minimizes noise and vibration and provides maximum performance and enhanced driving comfort. Included with the UV Coated rotors is a fixing screw kit with all the necessary hardware for simple and worry free installation. New intelligent marking location show part number & the minimum thickness. In order to optimize and restore braking performance rotors and pads should be replaced together. Pair your UV Coated rotor with Brembo's NAO/Ceramic or Low Met brake pad formulations. Brembo, the most trusted brand in braking.
- Total control over the entire process
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2002 | Audi | TT Quattro | ALMS Edition |
| 2000-2006 | Audi | TT Quattro | Base |
| 2006 | Audi | TT Quattro | Special Edition |
$299.00
$46.81
$239.95
$449.95
Stock stamped steel control arms with soft rubber bushings deflect under load and absorb power instead of transferring it to the tires. BMR's non-adjustable tubular control arms for 2008-2009 Pontiac G8 (LCA357) are MIG-welded and constructed from DOM steel tubing, with laser-cut mounting plates. This design gives you a lightweight, strong control arm that greatly improves performance. BMR's Poly bushings add a more responsive feel over the stock rubber bushings. BMR's bushings eliminate bushing deflection, ensuring more power get to the tires.BMR's suspension designed the LCA357 to work well for street performance and drag race applications. The stock control arms flex under load giving you inconsistent launch characteristics. Combine this with soft bushings that have massive amounts of deflection and you're left with poor performance. The LCA357's lightweight, yet strong construction eliminates control arm flex, giving you much improved repeatability on the street or starting line. BMR's poly bushings eliminate bushing deflection and transfer the maximum amount of torque and horsepower possible. This means better throttle response, quicker 60-foot times, and improved all-around performance.Trailing Arms (TCA033)Launching harder and reducing wheel hop, on your 2008-2009 Pontiac G8, is easy with trailingarms from BMR's suspension. Stock stamped steel trailing arms with soft rubber bushings deflectunder load and absorb power instead of transferring it to the tires. BMR's spherical, non-adjustable trailing arms for G8s (TCA033) are manufactured from heavy-duty 1.25-inch DOMsteel tubing.
Application GuideThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2014-2017 | Chevrolet | SS | Base |
| 2008-2009 | Pontiac | G8 | Base |
| 2008-2009 | Pontiac | G8 | GT |
| 2009 | Pontiac | G8 | GXP |
$69.95
$179.95
Motor mounts are used to keep the engine in place and absorb energy from it. However, factory motor mounts often do little to minimize engine deflection, resulting in lackluster throttle response, slower reaction times, and less accurate shifts in cars with manual transmissions. BMR's suspensions Polyurethane Motor Mount Kit (MM570) is built to reduce engine deflection and designed for drag racing, street performance, and handling applications. When performance is a must, rely on BMR's suspension!
Application GuideThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2019 | Chevrolet | Corvette | Grand Sport |
| 2014-2019 | Chevrolet | Corvette | Stingray |
| 2015-2019 | Chevrolet | Corvette | Z06 |
| 2019 | Chevrolet | Corvette | ZR1 |
$319.95
Launching harder, reducing wheel hop, and adding cornering consistency to your 2008-2017 Dodge Challenger is easy with lower trailing arms from BMR's suspension. Stock stamped steel trailing arms with soft rubber bushings deflect under load and absorb power instead of transferring it to the tires. BMRs rod ended, on-car adjustable trailing arms for Challenger (LTA112) are manufactured from heavy-duty 1-inch DOM steel tubing with TIG-welded Chrome-moly tube adapters. This design gives you a strong trailing arm that eliminates deflection and greatly improves performance. The LTA112 features zinc-plated two-piece, X-series, heat-treated, chrome-moly, self-lubricating, Teflon-lined rod ends. It also features 304 stainless steel, custom designed rod end spacers. This design provides reduced deflection, increased articulation, and an all-around improvement in performanceBMR's suspension designed the LTA112 to work well in street performance, drag race, and road race applications. The stock trailing arms flex under cornering loads giving you inconsistent handling characteristics. Combine this with soft bushings that have massive amounts of deflection and youre left with poor performance. The LTA112s heavy-duty construction eliminates trailing arm flex, giving you much improved repeatability on the street, starting line, or in the corners. BMRs rod ends allows for fine-tuning and bind-free suspension articulation needed for superior handling at any power level. When performance is a must, rely on BMR's suspension!BMR's suspensions LTA112 on-car adjustable lower trailing arms are available in red and black hammertone powdercoat for long-lasting good looks. Installation time is about 1 hour. Proudly made in the U.S.A.
Application GuideThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2016 | Dodge | Challenger | 392 Hemi Scat Pack Shaker |
| 2017-2020 | Dodge | Challenger | GT |
| 2009-2020 | Dodge | Challenger | R/T |
| 2017-2018 | Dodge | Challenger | R/T 392 |
| 2012 | Dodge | Challenger | R/T Classic |
| 2015-2016 | Dodge | Challenger | R/T Plus |
| 2016 | Dodge | Challenger | R/T Plus Shaker |
| 2016,2019-2020 | Dodge | Challenger | R/T Scat Pack |
| 2020 | Dodge | Challenger | R/T Scat Pack Widebody |
| 2016 | Dodge | Challenger | R/T Shaker |
| 2014 | Dodge | Challenger | Rallye Redline |
| 2015 | Dodge | Challenger | Scat Pack |
| 2009-2011 | Dodge | Challenger | SE |
| 2015-2018 | Dodge | Challenger | SRT 392 |
| 2018 | Dodge | Challenger | SRT Demon |
| 2015-2020 | Dodge | Challenger | SRT Hellcat |
| 2019-2020 | Dodge | Challenger | SRT Hellcat Redeye |
| 2020 | Dodge | Challenger | SRT Hellcat Redeye Widebody |
| 2020 | Dodge | Challenger | SRT Hellcat Widebody |
| 2008-2014 | Dodge | Challenger | SRT8 |
| 2012-2020 | Dodge | Challenger | SXT |
| 2012,2015-2018 | Dodge | Challenger | SXT Plus |
| 2017-2018 | Dodge | Challenger | T/A |
| 2017-2018 | Dodge | Challenger | T/A 392 |
$109.95
Protect your 2011 and newer Mustang, while complying with NHRA safety rules with a Driveshaft Safety Loop from BMR's suspension. If you drag race your S197 Mustang, chances are you need a driveshaft safety loop to be NHRA legal. Built from 1/4-inch laser-cut CNC-formed plate steel, BMRs DSL017 Driveshaft Safety Loop bolts-on using OE mounting holes from the factory transmission crossmember. This design gives you a solidly mounted loop that will stay in place should a driveshaft or transmission failure occur.BMR's suspension designed the Driveshaft Safety Loop to contain a driveshaft, keeping it from ripping through the floor or digging into the track in event of a failure. It simply attaches to the factory transmission crossmember with supplied Grade 8 hardware. Other companies driveshaft loops attach to the transmission and can fail to contain the driveshaft in the event of a transmission failure. BMR designed the DSL017 for street, drag race, and top speed applications. A Driveshaft Safety Loop is cheap insurance to protect your investment and provide peace-of-mind whether you are at the track or on the street. When performance is a must, rely on BMR's suspension!BMR's suspensions DSL017 bolt-on Driveshaft Safety Loop is available in black hammertone and red powdercoat for long-lasting good looks. Installation time is about 1 hour. Proudly made in the U.S.A.!
Application GuideThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2011-2014 | Ford | Mustang | Base |
| 2012-2013 | Ford | Mustang | Boss 302 |
| 2019-2020 | Ford | Mustang | Bullitt |
| 2015-2020 | Ford | Mustang | EcoBoost |
| 2015-2020 | Ford | Mustang | EcoBoost Premium |
| 2011-2020 | Ford | Mustang | GT |
| 2015 | Ford | Mustang | GT 50 Years Limited Edition |
| 2015-2020 | Ford | Mustang | GT Premium |
| 2015-2020 | Ford | Mustang | Shelby GT350 |
| 2016-2020 | Ford | Mustang | Shelby GT350R |
| 2020 | Ford | Mustang | Shelby GT500 |
| 2015-2017 | Ford | Mustang | V6 |
Bilstein B14 (PSS) suspension kits feature ride height adjustability in an OE quality, direct fit package. These kits offer monotube performance dampers with matched springs that are tuned for each specific application. The zinc coated and threaded body design will give you the flexibility to find the perfect ride height setting for your intended use while providing unsurpassed protection against the harshest road elements. B14 (PSS) suspension kits are made in Germany and feature technology tested on the famed Nürburgring.
Installation InstructionsWarranty
Material Safety Data Sheet
Material Safety Data Sheet
Installation Instructions
Warranty
- Triple-C-Technology surface coating for long lasting corrosion resistance
- Threaded body allows lowering of approximately 30mm to 50mm
- Tested by our engineers under motorsport conditions
- Monotube Gas Pressure Construction
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2002-2005 | Mercedes-Benz | C230 | Kompressor |
| 2006-2007 | Mercedes-Benz | C230 | Sport |
| 2001-2005 | Mercedes-Benz | C240 | Base |
| 2006-2007 | Mercedes-Benz | C280 | Luxury |
| 2002-2004 | Mercedes-Benz | C32 AMG | Base |
| 2001-2005 | Mercedes-Benz | C320 | Base |
| 2006-2007 | Mercedes-Benz | C350 | Luxury |
| 2006-2007 | Mercedes-Benz | C350 | Sport |
| 2005-2006 | Mercedes-Benz | C55 AMG | Base |
| 2003-2005 | Mercedes-Benz | CLK320 | Base |
| 2006-2009 | Mercedes-Benz | CLK350 | Base |
| 2003-2006 | Mercedes-Benz | CLK500 | Base |
| 2003-2006 | Mercedes-Benz | CLK55 AMG | Base |
| 2007-2009 | Mercedes-Benz | CLK550 | Base |
| 2007-2008 | Mercedes-Benz | CLK63 AMG | Base |
Bilstein B8 8112 (ZoneControl CR DSA+) is a direct fit, 3-way adjustable, 2.65-in body, position sensitive coilover shock designed for light trucks and SUV’s. ZoneControl CR DSA+ is a revolutionary technology delivering position sensitive damping plus user Dual Speed Adjustability. The system incorporates a triple piston design, offering 3 stages of compression valving and 2 stages of rebound valving. Click adjuster knobs allow easy and precise Dual Speed Adjustment of both low and high speed compression plus an adjustable JCO (internal hydraulic bump stop). The coilover module utilizes a threaded spring seat for ride height adjustability ranging from 0-3” (depending on application). It is supplied with a remote reservoir for increased cooling along with an accompanied, bolt-on anodized reservoir chassis mount. Bilstein B8 8112 (ZoneControl CR DSA+) position sensitive Dual Speed Adjustable coilovers offer unparalleled ride comfort during every day driving combined with maximum control over large suspension inputs with the ability to quickly adjust the shock to tackle any terrain.
Brochure - A general brochure describing a brand, company, product line. If brochure in question is for a specific product, use code PDB.Catalog
Material Safety Data Sheet
Product Brochure - a specific brochure describing a Product
Product Specifications Sheet
Warranty
Installation Instructions
- Click adjuster knobs allow easy and precise Dual Speed Adjustment of both low and high speed compression plus an adjustable JCO (internal hydraulic bump stop)
- ZoneControl® CR: Position sensitive damping with 3 compression zones and 2 rebound zones, controlled by 3 independent pistons
- 60mm remote reservoir for increased oil capacity and cooling
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2003-2009 | Lexus | GX470 | Base |
| 2003-2009 | Toyota | 4Runner | Limited |
| 2003-2009 | Toyota | 4Runner | SR5 |
| 2007-2009 | Toyota | FJ Cruiser | Base |
| 2008 | Toyota | FJ Cruiser | Trail Teams Special Edition |
| 2007 | Toyota | FJ Cruiser | TRD Special Edition |
Bilstein B8 8112 (ZoneControl CR DSA+) is a direct fit, 3-way adjustable, 2.65-in body, position sensitive coilover shock designed for light trucks and SUV’s. ZoneControl CR DSA+ is a revolutionary technology delivering position sensitive damping plus user Dual Speed Adjustability. The system incorporates a triple piston design, offering 3 stages of compression valving and 2 stages of rebound valving. Click adjuster knobs allow easy and precise Dual Speed Adjustment of both low and high speed compression plus an adjustable JCO (internal hydraulic bump stop). The coilover module utilizes a threaded spring seat for ride height adjustability ranging from 0-3” (depending on application). It is supplied with a remote reservoir for increased cooling along with an accompanied, bolt-on anodized reservoir chassis mount. Bilstein B8 8112 (ZoneControl CR DSA+) position sensitive Dual Speed Adjustable coilovers offer unparalleled ride comfort during every day driving combined with maximum control over large suspension inputs with the ability to quickly adjust the shock to tackle any terrain.
Product Brochure - a specific brochure describing a ProductWarranty
Catalog
Product Specifications Sheet
Material Safety Data Sheet
Installation Instructions
- Click adjuster knobs allow easy and precise Dual Speed Adjustment of both low and high speed compression plus an adjustable JCO (internal hydraulic bump stop)
- ZoneControl® CR: Position sensitive damping with 3 compression zones and 2 rebound zones, controlled by 3 independent pistons
- 60mm remote reservoir for increased oil capacity and cooling
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2014-2021 | Toyota | Tundra | 1794 Edition |
| 2007-2013 | Toyota | Tundra | Base |
| 2007-2021 | Toyota | Tundra | Limited |
| 2021 | Toyota | Tundra | Nightshade |
| 2010-2021 | Toyota | Tundra | Platinum |
| 2014-2021 | Toyota | Tundra | SR |
| 2007-2011,2014-2021 | Toyota | Tundra | SR5 |
| 2021 | Toyota | Tundra | Trail |
| 2015-2017,2019-2021 | Toyota | Tundra | TRD Pro |
Bilstein B8 8112 (ZoneControl CR) is a direct fit, 2.65-in body position sensitive coilover shock designed for light trucks and SUV’s. ZoneControl CR is a revolutionary technology delivering position sensitive damping. The system incorporates a triple piston design, offering 3 stages of compression valving and 2 stages of rebound valving. The coilover module utilizes a threaded spring seat for ride height adjustability ranging from 0-3.8” (depending on application). The coilover is supplied with a remote reservoir for increased cooling and an accompanied, bolt-on anodized reservoir chassis mount. BILSTEIN B8 8112 (ZoneControl) CR position sensitive coilovers will offer unparalleled ride comfort during every day driving combined with maximum control over large suspension inputs.
Installation InstructionsProduct Brochure - a specific brochure describing a Product
Warranty
Catalog
Material Safety Data Sheet
- ZoneControl® CR: Position sensitive damping with 3 compression zones and 2 rebound zones, controlled by 3 independent pistons
- Triple piston design delivers comfort during every day driving conditions and maximum control under large suspension inputs
- 60mm remote reservoir for increased oil capacity and cooling
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2010-2023 | Lexus | GX460 | Base |
| 2023 | Lexus | GX460 | Black Line Edition |
| 2023 | Lexus | GX460 | Luxury |
| 2010-2023 | Lexus | GX460 | Premium |
| 2010-2016 | Toyota | 4Runner | Trail |
| 2017-2024 | Toyota | 4Runner | TRD Off-Road |
| 2018-2024 | Toyota | 4Runner | TRD Off-Road Premium |
| 2020-2021 | Toyota | 4Runner | Venture |
Bilstein B8 Performance Plus (DampTronic) dampers are a performance upgrade to OE dampers designed to be paired with aftermarket lowering springs. All of the active features of the factory electronic suspension, along with the factory controls, will be retained with the installation of these dampers. Each damper is rigorously tested for quality that meets or exceeds OE standards and features application specific valve settings with a monotube design to bring out the best handling performance of a vehicle. B8 Performance Plus (DampTronic) dampers are the ideal solution for pairing with a lowering spring for improved handling and sportier look in a package compatible with factory electronic damping control.
Installation InstructionsWarranty
Material Safety Data Sheet
- Shortened high-performance shock absorbers for virtually every lowering sprint set
- Perfectly adapted to suit series-production electronic adjustment systems
- Ability to switch rapidly from comfort to sport setting
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2006-2012 | Porsche | 911 | Carrera 4 |
| 2012 | Porsche | 911 | Carrera 4 GTS |
| 2006-2012 | Porsche | 911 | Carrera 4S |
| 2007-2012 | Porsche | 911 | Targa 4 |
| 2007-2012 | Porsche | 911 | Targa 4S |
| 2007-2013 | Porsche | 911 | Turbo |
| 2011-2013 | Porsche | 911 | Turbo S |
Bilstein B6 Performance (DampTronic) dampers are a performance upgrade to OE dampers designed to be paired with OE factory springs. All of the active features of the factory electronic suspension, along with the factory controls, will be retained with the installation of these dampers. Each damper is rigorously tested for quality that meets or exceeds OE standards and features application specific valve settings with a monotube design to bring out the best handling performance of a vehicle. B6 Performance (DampTronic) dampers will deliver improved safety and handling performance in a package compatible with factory electronic damping control.
Installation InstructionsWarranty
Material Safety Data Sheet
- Marked improvement in safety and performance with additional spring changes
- Perfectly adapted to suit series-production electronic adjustment systems
- Ability to switch rapidly from comfort to sport setting
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2020 | Audi | A4 | Premium |
| 2017-2020 | Audi | A4 | Premium Plus |
| 2017-2020 | Audi | A4 | Prestige |
| 2017-2021 | Audi | A4 allroad | Premium |
| 2017-2021 | Audi | A4 allroad | Premium Plus |
| 2017-2021 | Audi | A4 allroad | Prestige |
| 2017-2021 | Audi | A4 Quattro | Premium |
| 2017-2019,2021 | Audi | A4 Quattro | Premium Plus |
| 2017-2021 | Audi | A4 Quattro | Prestige |
| 2019-2020 | Audi | A4 Quattro | Ultra sport |
| 2018-2021 | Audi | A5 Quattro | Premium |
| 2018-2021 | Audi | A5 Quattro | Premium Plus |
| 2018-2021 | Audi | A5 Quattro | Prestige |
| 2018-2021 | Audi | A5 Sportback | Premium |
| 2018-2021 | Audi | A5 Sportback | Premium Plus |
| 2018-2021 | Audi | A5 Sportback | Prestige |
| 2018-2019,2021 | Audi | RS5 | Base |
| 2019-2021 | Audi | S4 | Premium |
| 2018-2021 | Audi | S4 | Premium Plus |
| 2018-2021 | Audi | S4 | Prestige |
| 2019-2021 | Audi | S5 | Premium |
| 2018-2021 | Audi | S5 | Premium Plus |
| 2018-2021 | Audi | S5 | Prestige |
| 2020-2021 | Audi | S5 Sportback | Premium |
| 2018-2021 | Audi | S5 Sportback | Premium Plus |
| 2018-2021 | Audi | S5 Sportback | Prestige |
The Bilstein B8 8100 (DSA) reservoir shock absorber is an adjustable large bore 60mm (2.65" OD) direct fit solution for lifted trucks and SUVs. Constructed from aerospace quality billet components, the large 60mm ID shock body offers a higher oil volume capacity to control heat while tackling rough road surfaces over long distances. Click adjuster knobs allow easy and precise Dual Speed Adjustment of both low and high speed compression to tailor your ride to any surface. Each B8 8100 (DSA) offers a unique remote or piggyback reservoir solution for an easy, hassle free installation. These shock absorbers feature a monotube design for consistent fade free performance and utilize velocity sensitive digressive valve settings which are tuned for each specific application. The large 60mm piston design offers more comfort and control in all driving conditions. The Bilstein B8 8100 (DSA) will allow you to tame the terrain in comfort.
Installation InstructionsWarranty
Catalog
Material Safety Data Sheet
- Click adjuster knobs allow easy and precise Dual Speed Adjustment of both low and high speed compression to tailor your ride to any surface
- 60mm large bore digressive piston offers a greater range of tunability and delivers exceptional comfort without sacrificing control
- Direct fit for an easy installation
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2014-2021 | Toyota | Tundra | 1794 Edition |
| 2007-2013 | Toyota | Tundra | Base |
| 2007-2021 | Toyota | Tundra | Limited |
| 2021 | Toyota | Tundra | Nightshade |
| 2010-2021 | Toyota | Tundra | Platinum |
| 2014-2021 | Toyota | Tundra | SR |
| 2007-2011,2014-2021 | Toyota | Tundra | SR5 |
| 2021 | Toyota | Tundra | Trail |
| 2015-2017,2019-2021 | Toyota | Tundra | TRD Pro |
Showing 120/25001
Explore Related Collections
- Choosing a selection results in a full page refresh.
- Opens in a new window.