Fits 2007-2014 Toyota FJ Cruiser and 2010-2024 Toyota 4Runner models (without KDSS).

Protect the critical components of your vehicle's under-carriage with the ARB Under Vehicle Protection (UVP) kit. While bumpers and rock sliders protect the body, the UVP system is designed to shield the steering, oil pan, transmission, and transfer case from damage caused by rocks, stumps, and debris. This kit provides a smooth, flat surface to help the vehicle slide over obstacles while maintaining structural integrity.

• Fabricated from 3mm laser-cut, pressed, and folded steel for an optimal strength-to-weight ratio.
• Zinc-plated and finished in a silver textured powder coat for superior corrosion resistance.
• Securely bolts to the vehicle's chassis to ensure high structural integrity.
• Recessed mounting bolts are protected from impact and remain accessible for easy removal during vehicle servicing.
• Specifically designed for non-KDSS equipped models to ensure proper fitment and clearance.
• Manufacturer Part Number: 5421100.

Fits 2008-2021 Toyota Land Cruiser Base and Heritage Edition (V8 Diesel).

Standard body panels and bumpers are rarely enough to protect a vehicle's vital components from serious trail damage. The ARB Under Vehicle Protection (UVP) Kit is engineered specifically for the Land Cruiser 200 Series to shield the most vulnerable under-carriage systems from rocks, stumps, and unexpected off-road obstacles. This comprehensive skid plate system provides end-to-end coverage, ensuring your steering assembly, oil pan, transmission, and transfer case remain protected in technical terrain.

Each panel is manufactured from 3mm laser-cut steel that has been pressed and folded to provide a superior strength-to-weight ratio compared to standard flat steel. The system mounts securely to the vehicle chassis to maintain structural integrity under impact, while recessed mounting bolts prevent head-shearing and ensure easy removal for routine vehicle servicing.

• Construction: 3mm laser-cut steel, pressed and folded for maximum rigidity.
• Finish: Zinc-plated and silver textured powder coat for superior corrosion resistance.
• Protection Areas: Comprehensive coverage for steering, oil pan, transmission, and transfer case.
• Installation: Securely bolts to factory chassis mounting points.
• Hardware: Includes recessed fasteners to protect bolt heads from trail damage.
• Manufacturer Part Number: 5415100

Fits select 2018-2025 Jeep Wrangler JL 4-Door models, including Sahara, Rubicon, Sport, 4xe, and 392.

The DV8 Offroad FS-15 Series Rock Sliders are engineered to provide heavy-duty side-body protection for your Wrangler JL without sacrificing essential ground clearance. Designed for the enthusiast who frequents rocky terrain, these sliders feature a high-clearance, low-profile fitment that allows you to traverse obstacles without the hang-ups associated with traditional side steps. Constructed from robust 4mm (.160") walled steel tubing, this armor provides the structural integrity needed for serious off-road use.

Strength is prioritized through a three-point frame-mounting system, ensuring the sliders remain rigid when sliding over boulders. The assembly is finished in a micro-texture black powder coat for superior corrosion resistance and a clean, aggressive look. Installation is a direct bolt-on process that utilizes the factory hardware, making it a simple upgrade for your rig.

• Three frame-mounted attachment points for maximum rigidity and strength
• Heavy-duty 4mm (.160") wall steel tubing for superior impact protection
• High-clearance design maintains vehicle breakover angles
• Durable micro-texture black powder coat finish
• Quick bolt-on installation using existing factory hardware
• Manufacturer Part Number: SRJL-07

Fits 2007-2018 Jeep Wrangler JK 4-Door models including Unlimited Rubicon, Sahara, Sport, and X.

Protect your rocker panels from trail damage with the DV8 Offroad SRJK-07 Rock Sliders. Engineered for high-clearance performance, these sliders utilize a dual 2-inch steel tube design with boxed ends to provide a rigid barrier against rocks and trail obstacles. The heavy-duty .160 wall construction ensures maximum durability during technical crawls without sacrificing ground clearance.

Installation is a straightforward bolt-on process using three frame-mounted attachment points for superior rigidity. These sliders feature a micro-texture black powder coat finish to resist corrosion and match other off-road accessories. Note: These sliders replace and are not compatible with factory side steps or sliders.

• Construction: Heavy-duty .160 wall dual 2-inch steel tubing
• Finish: Durable micro-texture black powder coat
• Installation: 100% bolt-on; no drilling or cutting required
• Mounting: Three frame-mounted attachment points for maximum strength
• Design: High-clearance profile with boxed ends for snag-free travel
• MPN: SRJK-07

Fits 2003-2009 Lexus GX470 Base models.

DV8 Offroad FS-15 Rock Sliders are engineered to provide maximum side-body protection for the Lexus GX470 while maintaining a high-clearance profile for technical trails. These sliders feature a robust dual-tube design that shields the rocker panels from impact. To ensure superior rigidity, the FS-15 uses a 3-point frame-mounted installation method reinforced with gusseted plates.

Beyond trail protection, these sliders are designed with overlanding utility in mind. The front and rear end caps serve as reliable steps for accessing roof racks or rooftop tents. The kit also includes a beauty cap for the front fender flare to maintain a clean, finished appearance. This is a full bolt-on solution that requires no welding for installation.

• Dual-tube construction for maximum rocker panel coverage
• High and tight profile preserves critical ground clearance
• 3-point frame-mounted design with gusseted plates for impact resistance
• Integrated front and rear end caps double as access steps
• Complete bolt-on installation with all necessary hardware
• Includes beauty cap for seamless front fender flare integration
• Manufacturer Part Number: SRGX-02

Fits 2020-2025 Jeep Gladiator (All Trims).

Defend your Jeep Gladiator's lower body panels from trail debris and rock rash with DV8 Offroad Rock Skins. These skins provide a rugged barrier for the vulnerable sheet metal between your wheel wells, effectively concealing existing trail scars while preventing new damage during technical maneuvers. Precision-engineered for the JT platform, they maintain a slim profile that complements the factory body lines.

• Manufactured from heavy-duty 3mm steel for reliable impact protection
• Durable micro-texture black powder coat finish resists corrosion and scratches
• Engineered for compatibility with factory and most aftermarket fender flares
• Designed to work seamlessly with most aftermarket rock sliders and sidesteps
• Provides essential coverage for off-road environments and rocky terrain
• Manufacturer Part Number: SRGL-09

Fits select 2020-2025 Jeep Gladiator models (Sport, Sport S, Texas Trail, Willys, Willys Sport, Launch Edition, Mojave, NightHawk, Overland, Rubicon, 80th Anniversary, Altitude, Freedom, High Altitude, High Tide, and Jeep Beach).

Protect your Jeep Gladiator’s rear bedsides from trail damage with the DV8 Offroad SRGL-01 bedside sliders. The Gladiator’s extended rear overhang results in a challenging departure angle, making the factory bedsides vulnerable when descending off ledges or navigating rock gardens. These sliders are over-engineered to absorb impacts that would otherwise crush the bodywork or overwhelm the OEM Rubicon protection.

Constructed from a combination of 1/4-inch and 1/2-inch high-grade steel, these sliders are fully gusseted for maximum structural integrity. The sleek profile remains unobtrusive until needed, finished in a durable sand black powder coat to resist corrosion and trail rash. Installation is a straightforward bolt-on process using provided hardware.

• Manufacturer Part Number: SRGL-01
• Material: 1/4-inch and 1/2-inch high-grade steel
• Construction: Fully gusseted for heavy-duty reinforcement
• Finish: Sand black powder coat
• Installation: Direct bolt-on design
• Compatibility: Protects rear quarter panels/bedsides

Fits 2024-2026 Toyota Tacoma and Land Cruiser models. This rear belly skid plate provides essential underbody armor to protect your engine and oil pan from trail damage. Constructed from 3.5mm heavy-duty steel, it is designed to withstand impacts from rocks and obstacles while maintaining a high-clearance profile.

The DV8 SPTT1-09 features a durable micro-texture black powder coat finish for superior corrosion resistance. To ensure routine maintenance remains straightforward, it includes a removable access panel for the oil drain plug, eliminating the need to remove the entire plate for oil changes. This skid plate is a fully bolt-on solution that integrates seamlessly with both factory and DV8 front skid plates.

• Fits 2024-2026 Toyota Tacoma and Land Cruiser
• Fabricated from 3.5mm heavy-duty steel
• Micro-texture black powder coat finish
• Removable service panel for easy oil drain plug access
• Compatible with factory and DV8 front skid plates
• Simple, 100% bolt-on installation
• Manufacturer Part Number: SPTT1-09

Fits all 2024-2026 Toyota Tacoma models, including SR, SR5, TRD Off-Road, TRD Sport, TRD Pro, TRD PreRunner, Limited, and Trailhunter.

Armor the underside of your 4th-gen Tacoma with the DV8 Offroad Front Skid Plate (SPTT1-08). This plate is engineered to provide critical protection for the engine and intercooler against trail obstacles while maintaining ease of maintenance. The design includes a specific cutout to retain full access to the oil filter, ensuring you don't have to remove the armor for routine oil changes.

Constructed from heavy-duty 3.5mm steel, this skid plate is finished in a durable micro-texture black powder coat to resist corrosion and abrasions. It is fully compatible with both the factory front bumper and the DV8 Tacoma Centric Front Bumper, and it integrates seamlessly with either the OEM or DV8 Rear Belly Skid Plate. The installation is a direct bolt-on process using factory mounting points, requiring no drilling or permanent vehicle modifications.

• Protects engine and intercooler from impact damage
• Maintains factory oil filter access
• Fabricated from high-strength 3.5mm steel
• Micro-texture black powder coat finish for durability
• Compatible with factory or DV8 Centric front bumpers
• Easy bolt-on installation with included hardware
• Manufacturer Part Number: SPTT1-08

Fits 2024-2026 Toyota Land Cruiser (1958, Base, and First Edition).

Protect the critical components of your engine and intercooler from trail obstacles with the DV8 Offroad Front Skid Plate. Engineered for durability without sacrificing convenience, this skid plate features a strategic cutout that leaves the oil filter accessible for easy, routine maintenance. The design utilizes four existing factory mounting points for a secure fit and a straightforward, 100% bolt-on installation process.

Constructed from heavy-duty 3.5mm steel, this plate is finished in a micro-texture black powder coat to resist corrosion and mechanical wear. It is fully compatible with either the OEM or the DV8 Offroad Rear Belly Skid Plate for comprehensive underbody coverage.

• Material: 3.5mm High-strength Steel
• Finish: Micro-texture Black Powder Coat
• Installation: Bolt-on using 4 factory mounting points
• Protection: Shields engine and intercooler
• Serviceability: Maintains access to oil filter
• MPN: SPTL4-02

Fits select 2018-2025 Jeep Wrangler JL/JLU and 2020-2025 Jeep Gladiator JT across all trim levels (including Rubicon, Mojave, 4xe, and 392).

The DV8 Offroad SPJL-02 Sway Bar Disconnect Skid Plate is engineered to protect the sensitive electronic disconnect motor from trail obstacles and debris. Beyond functional protection, this skid plate provides a clean, finished appearance by concealing the exposed frame horns and crash bars that are often visible after installing an aftermarket front bumper.

Constructed from heavy-duty steel, the plate features precision-cut vents to maintain optimal airflow to the engine bay, helping to manage temperatures during high-RPM off-road use. The four-point mounting system ensures maximum rigidity and support when navigating technical terrain.

• Vehicle Protection: Shields the Rubicon sway bar disconnect motor from direct impacts.
• Clean Aesthetics: Covers factory frame horns and crash bars for a professional look with aftermarket bumpers.
• High Airflow: Vented design prevents heat soak in the engine compartment.
• Easy Installation: 100% bolt-on design utilizes factory mounting points; no drilling or permanent modifications required.
• Manufacturer Part Number: SPJL-02

Fits 2007-2018 Jeep Wrangler JK models equipped with the factory Dana 30 front axle. This includes Sport, Sahara, Rubicon, and Unlimited trims.

Protect your drivetrain from expensive trail damage with the DV8 Offroad SPJK-11 Front Differential Skid Plate. Designed specifically for the factory Dana 30 axle housing, this skid plate shields the pinion area and the lower section of the housing from direct rock impacts. By reinforcing the bottom of the differential, it prevents the cover from catching on obstacles and pulling away from the housing, which is a common cause of fluid leaks during technical rock crawling.

The SPJK-11 features a durable micro-texture black powder coat finish for superior corrosion resistance and a clean look. The simple bolt-on design utilizes multiple mounting points for maximum rigidity without the need for welding or major modifications. Please note that this unit is designed for use with factory differential covers and will not clear most aftermarket covers.

• Manufacturer Part Number: SPJK-11
• Compatible Axles: Factory Dana 30 Front ONLY (Not for Dana 44)
• Finish: Micro-Texture Black Powder Coat
• Installation: 100% Bolt-On
• Function: Protects pinion area and prevents housing hang-ups

Fits 2021-2026 Ford Bronco models including Badlands, Raptor, Wildtrak, and Everglades. Note: These are only compatible with trailing arm mounts that feature the OEM welded skid plate.

When navigating technical terrain, the frame-side trailing arm mounts are among the lowest and most vulnerable points on the Ford Bronco chassis. The DV8 Offroad SPBR-05 Trailing Arm Skid Plates are engineered to provide heavy-duty, wraparound protection for these crucial mounting components, preventing hang-ups on rocks and protecting the factory structure from impact damage.

Constructed for durability and a seamless fit, these skid plates feature a simple bolt-on installation that requires no permanent modifications. The micro-texture black powder coat finish provides superior corrosion resistance while matching the look of the OEM undercarriage for a clean, integrated appearance.

• Wraparound design for maximum coverage of the trailing arm mounting component
• Protects the lowest hanging frame mounts from off-road obstacles
• Heavy-duty construction prevents frame-side damage
• Micro-texture black powder coat finish matches factory trim
• Easy bolt-on installation for 2021-2026 Bronco models
• Manufacturer Part Number: SPBR-05

Fits 2021-2026 Ford Bronco (Badlands, Base, Big Bend, Black Diamond, Everglades, First Edition, Heritage, Outer Banks, Raptor, Stroppe, and Wildtrak).

The DV8 Offroad SPBR-04 Rear Shock Skids are engineered to shield the most vulnerable points on your Bronco's rear axle. Positioned at the lowest part of the axle housing, these skids protect both the rear shocks and the lower link mounts from impact and abrasion on the trail. Unlike multi-piece designs, these utilize a single-piece construction that ties the shock and link mounts together, significantly increasing the structural rigidity of the brackets.

Constructed from 3.5mm steel plating and finished in a durable micro-texture black powder coat, these skids allow your vehicle to slide over obstacles rather than hanging up on factory mounts. The simple bolt-on installation utilizes factory hardware and is compatible with most aftermarket shocks, links, and lift kits.

• Manufacturer Part Number: SPBR-04
• Material: 3.5mm Steel Plating
• Finish: Micro-Texture Black Powder Coat
• Protects rear shock mounts and lower control arm links
• Single-piece design for maximum strength
• Direct bolt-on installation using factory hardware
• Compatible with most lift kits and aftermarket components

Fits 2021-2026 Ford Bronco all trims including Badlands, Wildtrak, Raptor, and Heritage Edition.

Protect your drivetrain from severe trail damage with the DV8 Offroad Rear Differential Skid Plate (SPBR-03). This heavy-duty armor shields the differential housing, gasket seal, and pinion from direct impacts. Beyond the center section, the design features extended steel plating that protects the full length of the rear axle from link mount to link mount, ensuring your suspension mounting points remain intact during technical rock crawling.

Engineered for maximum durability, the skid plate utilize eight individual mounting locations for a secure, rigid fit. To prevent the accumulation of trail debris, strategically placed drain holes allow water and mud to clear the assembly easily. The unit is finished in a micro-texture black powder coat for superior corrosion resistance and features a paintable aluminum logo plate for customization.

• Fabricated from 4mm and 5mm high-strength steel
• Protects rear differential, gasket seal, pinion, and axle tubes
• 8-point mounting system for maximum structural integrity
• Direct bolt-on installation with no drilling required
• Integrated drain holes for water and mud evacuation
• Compatible with both 2-door and 4-door models across all trims
• Micro-texture black powder coat finish
• Manufacturer Part Number: SPBR-03

Fits 2021-2026 Ford Bronco models, including Badlands, Base, Big Bend, Black Diamond, Everglades, First Edition, Heritage Edition, Outer Banks, Raptor, Stroppe Edition, and Wildtrak.

Protect your Ford Bronco's vulnerable aluminum front lower control arms from trail damage with the DV8 Offroad A-Arm Skid Plates. Off-road obstacles like rocks and stumps can easily gouge aluminum components or shear factory hardware; these plates provide a rugged sacrificial barrier for the control arms and the lower shock mounting bolts. Engineered from heavy-duty 3.5mm steel and finished in a micro-texture black powder coat, they offer long-term corrosion resistance and durability against direct impacts.

Installation is a straightforward bolt-on process using the included hardware, requiring no permanent vehicle modifications. These skid plates are fully compatible with all Bronco trims, including those equipped with the Sasquatch and non-Sasquatch packages.

• Construction: 3.5mm heavy-duty steel
• Finish: Micro-texture black powder coat
• Protection: Shields A-arms and factory shock bolts
• Fitment: Compatible with all trims, including Raptor and Sasquatch packages
• Installation: Direct bolt-on; all hardware included
• Quantity: Sold as a pair
• Manufacturer Part Number: SPBR-02

Fits 2007-2018 Jeep Wrangler JK and Wrangler Unlimited JK (2-door and 4-door models).

Protect your engine bay from trail debris while improving airflow with DV8 Offroad Front Inner Fenders. These panels replace the factory plastic liners, offering a more durable solution for off-road environments. Constructed from lightweight aluminum, they feature a perforated panel designed specifically to allow excess heat to dissipate from the engine compartment, helping to maintain lower operating temperatures during low-speed crawling.

The INFEND-10FB kit features a two-piece design with a main body finished in a durable satin black powder coat and a secondary mesh insert that can be painted for a custom look. These fenders are designed for a straightforward bolt-on installation using factory mounting points. Please note that these are not recommended for use with factory fender flares without significant modification and may not be compatible with certain piggyback shock reservoirs.

• Manufactured from lightweight, corrosion-resistant aluminum
• Perforated panels for optimized engine bay heat dissipation
• Satin black powder coat finish with paintable mesh inserts
• Protects critical engine components from mud, rocks, and debris
• Includes front left and front right inner fenders
• Manufacturer Part Number: INFEND-10FB

Fits select 2018-2025 Jeep Wrangler JL and Unlimited models including Rubicon, Sahara, Sport, 392, and 4xe.

Protect your Jeep's rear wheel wells and exposed chassis components with the DV8 Offroad INFEND-06RB Rear Inner Fenders. When installing aftermarket fenders or removing factory liners to increase tire clearance, vital parts like fuel lines and body panels are often left vulnerable to trail debris. These inner fenders provide a clean, finished appearance while shielding your vehicle's internals from rocks, mud, and corrosion.

Built from 1.5mm lightweight aluminum, these liners are finished in a durable micro-texture black powder coat for long-lasting weather resistance. The distinctive raw aluminum mesh accent panels are fully removable and paintable, allowing for custom color-matching to your vehicle's body or suspension. Designed as a direct bolt-on upgrade, these fenders require no drilling or cutting and are engineered to perfectly complement DV8 Front Inner Fenders.

• Material: 1.5mm lightweight aluminum construction
• Finish: Micro-texture black powder coat
• Customization: Removable and paintable raw aluminum mesh accent panels
• Installation: Fully bolt-on design using factory mounting points
• Protection: Guards vital rear components and cleans up the wheel well
• Compatibility: Replaces factory liners for 2-door and 4-door JL models
• Part Number: INFEND-06RB

Fits select 2018-2025 Jeep Wrangler JL and Wrangler Unlimited models, including 4xe, Rubicon, Sahara, and Sport trims.

Protect your exposed engine compartment from trail debris and rocks with the DV8 Offroad Front Inner Fenders. When upgrading to aftermarket high-clearance fenders, these inner liners bridge the gap to keep mud and stones away from critical engine components. Constructed for durability and style, they feature a sleek satin black powder coat finish on the main bodies and lightweight aluminum mesh panels for optimized airflow.

Installation is straightforward with a fully bolt-on design that utilizes factory mounting points. These fenders are engineered for versatility, maintaining compatibility with or without the passenger-side factory crash bar found on 2023 and newer models. The mesh accent panels are easily removable and paintable, allowing you to color-match the liners to your Jeep's body paint or accent theme.

• Maintains engine bay airflow with lightweight aluminum mesh panels
• Protective satin black powder coat finish for corrosion resistance
• Customizable, paintable accent panels for a personalized look
• Simple bolt-on installation with no drilling or cutting required
• Compatible with or without 2023+ passenger-side factory crash bars
• Manufacturer Part Number: INFEND-06FB

Fits select 2018-2025 Jeep Wrangler JL and Wrangler Unlimited models including Sport, Sahara, Rubicon, and 4xe.

The DV8 Offroad INFEND-03RB Aluminum Rear Inner Fenders are designed to clean up the look of your wheel wells when running aftermarket fenders. These liners protect the body and internal components from trail debris while providing a more finished appearance than the exposed factory sheet metal. Engineered for practical use on the trail, they feature a large vent area to maximize airflow and allow for easy access to the rear shocks without requiring the removal of the fender or liner.

Constructed from lightweight aluminum and finished in a durable black powder coat, these liners are built to withstand the elements. The installation is straightforward and utilizes factory mounting points, requiring no drilling or cutting of the vehicle.

• Replaces factory liners to provide a clean, finished look
• Large vented sections for improved ventilation
• Maintains access to shock hardware for easy maintenance
• Durable aluminum construction
• Corrosion-resistant black powder coat finish
• Compatible with most aftermarket fender flares
• No drilling or cutting required for installation
• Manufacturer Part Number: INFEND-03RB

Fits select 2018-2025 Jeep Wrangler (JK/JL) and 2020-2025 Jeep Gladiator. This includes 2-door and 4-door models across Rubicon, Sahara, Sport, and Mojave trims.

Protect your engine bay from trail debris and road spray while maintaining optimal operating temperatures with DV8 Offroad aluminum front inner fenders. These liners are specifically designed to reseal the engine compartment when using aftermarket high-clearance fenders, ensuring mud and rocks stay away from sensitive components. The multi-piece construction allows for a precision fit and easy access to front shocks for tuning or maintenance without removing the entire inner fender.

Built from lightweight yet durable aluminum, these fenders feature a textured black powder coat finish for superior corrosion resistance. The integrated large vent areas maximize airflow to keep under-hood temperatures in check during slow-speed crawling or high-load conditions. Installation is a straightforward bolt-on process that requires no drilling or cutting on most applications.

• Material: Lightweight Aluminum
• Finish: Textured Black Powder Coat
• MPN: INFEND-03FB
• Design: Multi-piece for easy shock access and tight seal
• Ventilation: High-flow mesh vents for improved heat dissipation
• Installation: Direct bolt-on; no drilling or cutting required

Fits select 2007-2018 Jeep Wrangler JK and Wrangler Unlimited models including Rubicon, Sahara, Sport, and X trims.

DV8 Offroad INFEND-01RB Rear Aluminum Inner Fenders are engineered to provide a professional, finished look to your wheel wells after installing aftermarket high-clearance fenders. These liners help reseal the rear wheel arch areas and protect body components while optimizing airflow. Unlike many competing designs, DV8 inner fenders are specifically engineered to allow easy access to your rear shocks without necessitating the removal of the fender or the liner itself.

Manufactured from lightweight, corrosion-resistant aluminum and finished in a durable black powder coat, these inner fenders provide long-lasting protection against debris and trail obstacles. This patented design ensures a precise fit for both 2-door and 4-door JK-platform Wranglers.

• Manufacturer Part Number: INFEND-01RB
• Position: Rear
• Material: Aluminum
• Finish: Black Powder Coat
• Quantity: Sold as a Pair
• Patent Number: US D785,522 S

Fits 2024-2025 Toyota Tacoma models, including SR, SR5, TRD Sport, TRD Off-Road, TRD PreRunner, TRD Pro, Trailhunter, and Limited.

Protect your 4th Gen Tacoma’s front undercarriage with the Addictive Desert Designs Stealth Center Mount Front Bumper Skid Plate. Specifically engineered to complement the Stealth Center Mount Winch Front Bumper, this plate provides essential armor against trail obstacles. The design maintains full functionality of factory equipment, including OEM sensors, the front camera, and Adaptive Cruise Control (ACC) systems.

Constructed from lightweight yet durable 3/16-inch aluminum, this skid plate is finished in a rugged satin black powder coat for superior corrosion resistance. The fully bolt-on design ensures a straightforward installation with no cutting or drilling required, allowing you to return to the factory configuration if needed.

• Designed specifically for the ADD Stealth Series Center Mount Winch Front Bumper
• 3/16-inch aluminum construction for high-strength protection
• Durable satin black powder coat finish
• Retains use of OEM front sensors and camera systems
• Simple bolt-on installation with included mounting hardware
• Made in the USA
• Manufacturer Part Number: AC6705601NA

Note: This skid plate is only compatible with the Stealth Center Mount Winch Front Bumper.

Fits 2022-2025 Ford Bronco Raptor.

Protect your Bronco Raptor's vital front-end components with the Addictive Desert Designs Rock Fighter Skid Plate. This heavy-duty upgrade is engineered to shield the undercarriage from rocks, ruts, and trail debris that can cause costly damage to essential drivetrain parts during off-road excursions. Specifically designed as a companion piece for ADD Rock Fighter or Bomber series front bumpers, it ensures seamless fitment and integrated protection.

Crafted in the USA from 3/16-inch high-grade aluminum alloy, this skid plate provides a high strength-to-weight ratio to keep your vehicle protected without unnecessary bulk. The satin black powder coat finish adds a layer of resistance against salt, corrosion, and harsh weather conditions while maintaining a clean, aggressive look.

• Specifically designed for use with Rock Fighter and Bomber front bumpers
• Constructed from 3/16-inch high-grade aluminum alloy
• Durable satin black powder coat finish for corrosion resistance
• Protects radiator and front-end components from off-road impacts
• Direct-fit installation with compatible ADD bumpers
• Made in the USA
• Manufacturer Part Number: AC26005NA03

Fits select 2021-2025 Ford Bronco models. The Addictive Desert Designs Bomber Front Skid Plate is engineered to replace the vulnerable factory plastic unit with high-clearance, heavy-duty protection. Designed specifically to follow the contours of the ADD Bomber Front Bumper, this skid plate provides a seamless transition and essential underbelly defense for your Bronco.

• Manufactured from high-grade 3/16-inch aluminum alloy for maximum durability and weight savings.
• Finished in a durable satin black powder coat to resist corrosion and off-road wear.
• Direct bolt-on installation using factory mounting points with no cutting required.
• Proudly made in the USA.
• Note: Specifically designed for use with the ADD Bomber series front bumper.

Manufacturer Part Number: AC23008NA03