Fits 2007-2018 Jeep Wrangler JK (2-Door and 4-Door) models. The Artec Industries Rear Track Bar Bracket (JK4426) is a heavy-duty solution designed to correct rear suspension geometry and restore the roll center on lifted Jeeps. Lifting your Wrangler often results in an off-center rear axle and steep track bar angles; this bracket provides the necessary correction to improve handling stability and reduce axle shift during articulation.

• Corrects rear roll center and restores proper axle alignment on lifted vehicles
• Designed to withstand high-stress off-road conditions and prevent bracket failure
• Essential for maintaining predictable handling characteristics on 2007-2018 JK models
• Precision-engineered for a secure fit to the factory axle housing
• Manufacturer Part Number: JK4426

Fits 2007-2018 Jeep Wrangler JK.

Artec Industries Heavy Duty Rear Axle Upper Control Arm (UCA) Brackets provide a rugged, high-strength solution for replacing or upgrading the factory mounts on your Jeep JK. These brackets are designed to withstand the stresses of off-road use, offering significantly more durability than the thin-gauge OEM components they replace. Whether you are repairing damaged factory mounts or building a custom axle, these HD brackets provide the structural integrity needed for demanding terrain.

• Heavy-duty construction designed for high-stress off-road applications.
• Direct replacement for weak factory upper control arm mounting points on the rear axle.
• Precision engineered for 2007-2018 Jeep Wrangler JK (2-door and 4-door) fitment.
• Includes one pair of brackets (driver and passenger side).
• Manufacturer Part Number: JK4424

Fits 2007-2018 Jeep Wrangler JK models.

These heavy-duty front axle lower control arm (LCA) brackets from Artec Industries are designed to replace or reinforce the vulnerable factory mounts on your Jeep JK. The factory brackets are known to bend or tear when subjected to off-road abuse or larger tire diameters. These replacements provide a much-needed upgrade for trail-ready rigs, ensuring your suspension geometry stays intact during technical crawling or high-speed desert runs.

• Direct replacement for factory front axle lower control arm brackets
• Engineered for off-road durability and rock clearance
• Sold as a complete pair (Driver and Passenger sides)
• Weld-on installation ensures maximum strength
• Manufacturer Part Number: JK4412

Fits 2007-2018 Jeep Wrangler JK.

The Artec Industries Heavy Duty Stock Tracbar Bracket (JK4407) is a high-strength replacement for the often-weak factory axle-side track bar mount. Designed to maintain factory steering geometry while offering significantly more rigidity than the thin OE bracket, this heavy-duty upgrade helps prevent the mounting hole wallowing and bracket flex that can contribute to front-end instability.

• Replaces weak factory axle-side track bar bracket in the stock location
• Heavy-duty construction provides superior durability for off-road use
• Helps eliminate steering play caused by bracket flex
• Engineered for precise fitment on 2007-2018 Wrangler JK models
• Manufacturer Part Number: JK4407

Fits 2007-2018 Jeep Wrangler JK models.

The Artec Industries Heavy Duty Raised Track Bar Bracket (JK4406) is engineered to optimize suspension geometry on lifted Jeep JKs. By raising the track bar's axle-side mounting point, this bracket helps restore the vehicle's roll center, significantly improving handling and reducing body roll during cornering. Precision-cut from heavy-duty steel, this bracket provides a far more robust mounting solution than the factory equipment, ensuring your axle remains properly centered under the stresses of off-road use.

• Fits 2007-2018 Jeep Wrangler JK
• Heavy-duty steel construction for maximum durability and strength
• Raised design improves roll center and suspension geometry on lifted vehicles
• Helps eliminate suspension bind and improves steering feel
• Replaces or reinforces weak factory axle brackets
• Manufacturer Part Number: JK4406

The Artec Industries Adjustable Inner Frame Bracket (BR1040) is a heavy-duty fabrication component designed for custom suspension builds. Engineered to provide a robust mounting point for link arms, this 25-degree bracket allows fabricators to optimize suspension geometry and axle positioning on custom chassis or axle-swapped vehicles.

• Optimized 25-degree angle for improved link clearance and suspension geometry.
• Adjustable mounting holes for fine-tuning anti-squat and roll center characteristics.
• Versatile fitment: Designed for Front Passenger or Rear Driver side applications.
• Professional-grade component for secure link-to-frame attachment.

This single bracket is an essential component for builders seeking precise control over their suspension cycle. As a weld-on part, it requires professional fabrication skills to ensure structural integrity and proper alignment with the vehicle's frame.

• Brand: Artec Industries
• Part Number: BR1040
• Angle: 25 Degrees
• Position: Front Passenger / Rear Driver
• Quantity: Single

The Artec Industries BR1017 10-Degree Inner Frame Bracket is a precision fabrication component designed for builders constructing custom suspension geometries. This weld-on bracket is specifically angled at 10 degrees to optimize link placement on the inner frame rail, ensuring proper clearance and articulation for 3-link or 4-link setups.

• Manufacturer Part Number: BR1017
• Orientation: Front Passenger Side or Rear Driver Side
• Mounting Angle: 10-Degree
• Configuration: Inner Frame Mount
• Quantity: Sold Individually (Single)

This bracket is engineered for heavy-duty off-road use and provides a secure, professional mounting point for custom chassis work. As a weld-on component, it allows for maximum flexibility in suspension design and axle placement.

This Artec Industries 0-degree inner frame bracket (BR1015) is engineered for heavy-duty custom suspension fabrication. Designed to be welded directly to the inner frame rail, this bracket provides a robust, reliable mounting point for control arms or suspension links in off-road and rock-crawling applications.

Precision laser-cut from high-strength steel, this bracket offers the durability required to withstand extreme trail stresses. The specific 0-degree geometry is designed for front passenger or rear driver side installations, allowing fabricators to maintain precise suspension geometry during custom builds.

• Manufacturer Part Number: BR1015
• Angle: 0 Degree
• Orientation: Front Passenger or Rear Driver
• Quantity: Single bracket (1)
• Material: Heavy-duty raw steel
• Installation: Weld-on application for custom suspension links

The Artec Industries BR1014 Inner Frame Bracket is a heavy-duty solution for custom suspension fabrication, providing a secure and precise mounting point on the vehicle frame. This 0-degree bracket is specifically designed for use on the front driver side or the rear passenger side, offering the structural integrity required for custom link or control arm mounting.

Constructed for serious off-road applications, this bracket simplifies the fabrication process by providing a weld-ready component that integrates directly into the inner frame rail. Whether you are building a custom 3-link or 4-link system, the BR1014 ensures your suspension geometry starts with a solid foundation.

• Manufacturer Part Number: BR1014
• Angle: 0 Degree
• Positioning: Front Driver / Rear Passenger
• Quantity: Single Bracket

The Artec Industries Large 4-Link Crossmember Bracket (BR1006) provides a robust, heavy-duty mounting solution for custom 4-link suspension geometries. Designed for professional-grade chassis fabrication and extreme off-road builds, this weld-on bracket ensures precise suspension link placement and long-term durability under high-stress conditions.

• Manufacturer Part Number: BR1006
• Tube Fitment: Designed specifically for 2.0-inch square tubing
• Application: Large-format 4-link suspension crossmembers
• Installation: Weld-on design for secure, permanent chassis integration

Fits 2024-2025 Toyota Land Cruiser 1958 and Base models.

This ARB vehicle-specific fitting kit is required for the proper installation of an ARB bumper to the vehicle chassis. Engineered specifically for the Land Cruiser 250 series, this mounting kit ensures a secure connection while maintaining full compatibility with the vehicle's factory safety systems. The kit replaces the need for generic brackets with a precision-engineered solution that aligns with OE mounting points.

• Vehicle-specific design for 2024-2025 Toyota Land Cruiser (LC250)
• Required for secure ARB front bumper installation
• Engineered to work with factory safety systems
• Includes all necessary high-grade mounting hardware
• Manufacturer Part Number: 6178473
• Reference Number: 3421885

Fits 2022-2025 Toyota Tundra (SR, SR5, Limited, Platinum, 1794 Edition, and Capstone).

The ARB Bumper Mounting Kit (MPN 6178256) is the essential, vehicle-specific interface required to securely attach ARB Bumper #3415260 to your vehicle's chassis. Engineering a mounting system involves more than simple brackets; this kit is purpose-built to integrate with the Toyota Tundra's frame while remaining compatible with factory safety systems, including airbag deployment sensors.

Constructed for maximum structural integrity, this kit replaces or augments factory mounting points to handle the additional weight and leverage of an aftermarket bull bar. It includes all necessary high-strength hardware to ensure a precise, bolt-on fitment without the need for custom fabrication.

• Vehicle-specific design for 2022-2025 Toyota Tundra models
• Specifically required for mounting ARB Bumper part number 3415260
• Engineered to maintain compatibility with OE safety systems
• Heavy-duty steel construction for chassis-mount rigidity
• Complete hardware kit included for installation
• Manufacturer Part Number: 6178256

Fits 2016-2023 Toyota Tacoma Limited, SR, SR5, Trail, TRD Off-Road, and TRD Sport models.

This ARB Bumper Mounting Kit (MPN 6178110) is the essential, vehicle-specific hardware package required to securely mount your ARB bumper to the vehicle chassis. Specifically engineered for the 3rd Gen Toyota Tacoma, this kit is designed to provide a structural connection that maintains the integrity of the vehicle's factory safety systems, including airbag deployment sensors.

• Vehicle-specific design ensures a precision fit for 2016-2023 Toyota Tacoma models
• Required component for installing ARB Bumper part number 3423200K
• Engineered to integrate with OE chassis safety and impact systems
• Includes all necessary high-grade mounting hardware and brackets
• Durable finish for long-term corrosion resistance
• Manufacturer Part Number: 6178110

Fits 2021-2025 Ford Bronco (Badlands, Base, Big Bend, Black Diamond, Everglades, Heritage Edition, Outer Banks, and Wildtrak).

This ARB vehicle-specific fitting kit is the essential hardware required to mount the ARB bumper (part number 3480010) to the Ford Bronco chassis. Precisely engineered for the sixth-generation Bronco platform, this kit ensures the bumper is properly aligned and securely anchored to factory mounting points while maintaining the integrity of the vehicle's safety systems.

• Required for successful installation of ARB Bumper 3480010
• Specifically engineered for 2021-2025 Ford Bronco chassis and safety systems
• Heavy-duty construction for reliable bumper retention during off-road use
• Complete kit includes all necessary mounting hardware
• Manufacturer Part Number: 6177747

Fits 2021-2025 Ford Bronco (all submodels including Badlands, Wildtrak, and Outer Banks).

The ARB Bumper Mounting Kit is a vehicle-specific installation solution required to securely attach ARB bumper models 3280010 and 3280020 to your vehicle's chassis. Engineered for precise alignment, this kit (MPN 6177734) ensures that your aftermarket bumper provides the structural integrity needed for off-road use while maintaining compatibility with factory safety systems.

• Vehicle-specific design for the 2021-2025 Ford Bronco chassis
• Required for mounting ARB bumper part numbers 3280010 and 3280020
• Engineered for compatibility with factory safety sensors and systems
• Includes all necessary high-strength hardware for complete installation
• Durable construction to handle the added weight and leverage of aftermarket armor
• Manufacturer Part Number: 6177734

Fits 2021-2025 Ford Bronco models including Badlands, Base, Big Bend, Black Diamond, Everglades, Heritage Edition, Heritage Limited Edition, Outer Banks, and Wildtrak.

The ARB Bumper Mounting Kit (MPN: 6177706) provides the essential structural interface required to securely mount an ARB front bumper (specifically designed for part number 5680010) directly to the Ford Bronco chassis. This vehicle-specific kit is engineered to handle the stresses of recovery and off-road use while remaining fully compatible with the vehicle's factory safety systems.

• Vehicle-specific design ensures precise alignment with 2021-2025 Ford Bronco chassis points
• Includes all necessary mounting hardware for a complete installation
• Required component for installing ARB Bumper part number 5680010
• Specifically engineered to maintain the performance of factory safety and airbag systems
• Manufacturer Part Number: 6177706

Fits 2014-2024 Toyota 4Runner (SR5, Trail, TRD Off-Road, TRD Pro, and 40th Anniversary Edition).

The ARB 6177525 Bumper Mounting Kit is the essential hardware package required to securely install the 3421570K ARB bumper to your Toyota 4Runner chassis. This vehicle-specific kit is engineered to maintain structural integrity while ensuring the bumper integrates properly with the vehicle's factory safety systems.

Each component is designed to handle the stresses of off-road use and winching operations, providing a rigid connection point between the armor and the frame rails. The kit includes all necessary mounting brackets and high-grade hardware for a complete installation, replacing or augmenting factory mounting points for maximum strength.

• Manufacturer Part Number: 6177525
• Required for ARB Bumper 3421570K
• Vehicle-specific design for 2014-2024 Toyota 4Runner
• Includes all necessary chassis mounting hardware
• Maintains compatibility with OE safety systems

Fits 2019-2023 Ford Ranger Lariat, XL, and XLT.

This vehicle-specific fitting kit is required to securely mount your ARB bumper to the Ford Ranger chassis. Engineered as the critical interface between the vehicle's frame and the bumper assembly, this mounting kit (MPN 6177420) has been meticulously designed to ensure full compatibility with the Ranger's factory safety systems. By utilizing dedicated chassis-mounting points, this kit provides the structural integrity necessary for off-road protection and recovery scenarios.

• Direct fit for 2019-2023 Ford Ranger chassis
• Required for ARB bumper assembly 3440560K
• Engineered to maintain compatibility with factory safety systems
• Heavy-duty construction for secure bumper attachment
• Includes all necessary installation hardware
• Manufacturer Part Number: 6177420

Fits 2016-2021 Toyota Land Cruiser Base and Heritage Edition.

The ARB Bumper Mounting Kit (MPN 6177290) provides the essential structural components and hardware required to securely attach ARB Bumper 3415250 to the vehicle chassis. This vehicle-specific fitting kit is engineered specifically for the 200 Series Land Cruiser frame, ensuring that the bumper integrates seamlessly with the factory crumple zones and SRS airbag systems for continued safety performance.

• Required fitting kit for ARB Bumper part number 3415250
• Engineered for 2016-2021 Toyota Land Cruiser chassis
• Includes all necessary high-strength mounting hardware
• Designed for compatibility with vehicle safety systems
• Durable finish for corrosion resistance in harsh environments
• Manufacturer Part Number: 6177290

Fits 2014-2019 Toyota Tundra (1794 Edition, Limited, Platinum, SR, SR5, and TRD Pro).

The ARB Bumper Mounting Kit is a vehicle-specific installation solution required to securely attach an ARB front bumper to the chassis of your Toyota Tundra. This kit provides the structural interface between the vehicle frame and the bumper, ensuring proper alignment and optimal strength for off-road use and recovery operations.

Engineered for full compatibility with the Tundra's safety systems, this mounting kit is designed to work with factory airbag deployment sensors. It replaces standard OE mounting hardware with high-strength components capable of supporting the increased weight and leverage of an aftermarket steel bumper system.

• Vehicle-specific design for 2014-2019 Toyota Tundra
• Required for mounting ARB bumpers (associated with bumper kit 3415020K)
• Maintains compatibility with vehicle safety and airbag systems
• Includes all necessary heavy-duty mounting hardware
• Precision-engineered for direct chassis integration
• Manufacturer Part Number: 6174871

Fits 1995-2004 Toyota Tacoma (Base, DLX, Limited, Pre Runner, S-Runner, and SR5).

This ARB Bumper Mounting Kit provides the critical interface between your vehicle's chassis and an ARB front bumper (specifically designed for bumper part number 3423040). Engineered as a vehicle-specific solution, this kit ensures that your bumper is securely anchored to the frame, providing the structural integrity needed for off-road use and winch applications.

Every component in the 6174830 kit is designed to work in harmony with the Toyota Tacoma's safety systems. The brackets and hardware facilitate a precise fitment that maintains factory tolerances while replacing or upgrading the original mounting points for maximum durability.

• Specifically engineered for 1995-2004 Toyota Tacoma chassis
• Required for the installation of ARB Bumper MPN 3423040
• Includes all necessary high-strength mounting brackets and hardware
• Maintains compatibility with vehicle safety systems
• Heavy-duty construction for secure chassis attachment
• Manufacturer Part Number: 6174830

Fits 2016-2019 Toyota Tacoma (Limited, SR, SR5, TRD Off-Road, and TRD Sport).

The ARB Bumper Mounting Kit (MPN: 6174827) is a vehicle-specific hardware solution required to securely attach ARB front bumpers to your Tacoma chassis. Engineered to provide a rigid foundation for your protection equipment, this kit is specifically designed to maintain the performance and functionality of the vehicle's original safety systems.

• Required for mounting ARB bumper models: 3423160, 3423160K, and 3423160K2
• Vehicle-specific design ensures precise alignment with factory mounting points
• Includes all necessary heavy-duty hardware for a complete installation
• Maintains compatibility with factory chassis safety systems
• Manufacturer Part Number: 6174827

Fits 2015-2020 Chevrolet Colorado Base, LT, WT, Z71, and ZR2.

The ARB Bumper Mounting Kit (6174290) is a vehicle-specific installation solution required to secure an ARB 3462050K bumper to the vehicle chassis. Engineered to integrate seamlessly with the Chevrolet Colorado's frame, this mounting system is designed to maintain the integrity of the vehicle's onboard safety systems during bumper installation.

This kit provides the structural interface between the bumper assembly and the truck's frame rails, ensuring a secure fit that handles the stresses of off-road use and winch loads. It includes all necessary high-strength hardware and brackets specifically measured for the second-generation Colorado platform.

• Vehicle-specific design for 2015-2020 Chevrolet Colorado
• Required for mounting ARB Bumper Part Number 3462050K
• Engineered for compatibility with factory safety systems
• Complete kit includes all necessary mounting hardware
• Direct-to-chassis structural integration
• Manufacturer Part Number: 6174290

Fits 2006-2009 Toyota 4Runner Limited, Sport, and SR5 models.

The ARB Bumper Mounting Kit (MPN: 6174126) is the vehicle-specific hardware solution required to securely install the ARB Bumper (part number 3421540) to the vehicle chassis. This kit is engineered to maintain the integrity of the 4Runner's safety systems, ensuring that bumper impact performance remains compatible with factory chassis specifications.

Constructed for heavy-duty off-road use, this kit replaces or supplements factory mounting points to provide a rigid platform for front-end protection. It includes all necessary brackets and high-grade hardware to complete the installation from the bumper to the frame.

• Specifically designed for the Toyota 4Runner 2006-2009 chassis
• Required for mounting ARB Bumper part number 3421540
• Includes all necessary installation hardware
• Engineered for compatibility with vehicle safety systems
• Manufacturer Part Number: 6174126

Fits 2003-2005 Toyota 4Runner Limited, Sport, and SR5 models.

The ARB Bumper Mounting Fitting Kit 6174125 provides the essential structural interface required to secure an ARB Bull Bar (part number 3421530) to your vehicle's chassis. Unlike universal brackets, this vehicle-specific kit is engineered to maintain the integrity of your 4Runner's safety systems, ensuring that the bumper remains compatible with factory airbag deployment sensors and crumple zones.

Constructed for heavy-duty off-road use, this kit includes all the necessary high-tensile hardware and precision-cut brackets needed for a professional installation. By bolting directly to the factory mounting points on the frame, it provides the rigid foundation required for winching and recovery operations.

• Manufacturer Part Number: 6174125
• Specifically designed for 2003-2005 Toyota 4Runner chassis
• Required for the installation of ARB Bumper part number 3421530
• Includes all necessary mounting brackets and hardware
• Engineered to work with OE safety and airbag systems

Fits 2014-2016 Jeep Grand Cherokee models (75th Anniversary, Laredo, Limited, and Summit).

The ARB Bumper Mounting Kit (MPN 6173559) is an essential, vehicle-specific fitting solution required to securely attach ARB front bumper part number 3450420 to your vehicle's chassis. Unlike universal brackets, this kit is precision-engineered to maintain the structural integrity of your Jeep and ensure that the bumper integrates correctly with factory safety systems.

• Specifically designed for compatibility with ARB Bumper 3450420
• Includes all necessary high-strength hardware to mount the bumper to the chassis
• Engineered to work in conjunction with factory crumple zones and safety sensors
• Vehicle-specific design ensures proper alignment and fitment
• Manufacturer Part Number: 6173559

Fits 2012-2015 Toyota Tacoma models including Base, Pre Runner, TRD Pro, and X-Runner.

The ARB Bumper Mounting Kit (6173362) is the essential hardware package required to securely attach an ARB front bumper to your vehicle's chassis. Specifically engineered for the 2012-2015 Toyota Tacoma, this kit has been precision-designed to interface with the factory frame while maintaining compatibility with the vehicle's safety systems, including airbag deployment sensors and crumple zones.

• Required for mounting ARB bumper part number 3423140 to the vehicle chassis
• Vehicle-specific design ensures precise fitment and structural integrity
• Engineered to work with the vehicle's factory safety systems
• Complete kit includes all necessary mounting hardware
• Manufacturer Part Number: 6173362

Fits 1995-2004 Toyota Tacoma.

The ARB Bumper Mounting Kit is the essential, vehicle-specific hardware package required to securely attach ARB Bumper part number 3423020 to your vehicle chassis. Precision-engineered for a perfect fit, this kit ensures the bumper is mounted in a way that remains compatible with the Tacoma's specific safety systems and chassis tolerances. Whether you are performing a fresh installation or replacing worn mounting components, this kit provides the structural integrity needed for serious off-road use.

• Engineered specifically for 1995-2004 Toyota Tacoma chassis mounting points
• Required for the proper installation of ARB Bumper #3423020
• Designed to integrate seamlessly with original equipment safety systems
• Comprehensive kit includes all necessary heavy-duty mounting hardware
• Manufacturer Part Number: 6173276

Fits 2010-2013 Toyota 4Runner SR5 and Trail models.

The ARB Bumper Mounting Kit (MPN 6173065) is a vehicle-specific installation solution required to securely attach ARB Bumper 3421520 to the vehicle chassis. This kit is precision-engineered to handle the structural demands of off-road use and winch loads while remaining fully compatible with the 4Runner's factory safety systems.

• Specifically designed for the installation of ARB Bumper part number 3421520
• Complete hardware set included for a secure bumper-to-chassis connection
• Vehicle-specific design ensures correct alignment and structural integrity
• Engineered to maintain compatibility with factory airbag and safety systems
• Manufacturer Part Number: 6173065

Fits 2007-2014 Toyota FJ Cruiser (Base, Trail Teams Special Edition, and TRD Special Edition).

The ARB Bumper Mounting Kit (MPN: 6173022) is a vehicle-specific hardware solution required to properly mount ARB Bumper 3420210 to the vehicle chassis. This kit is precision-engineered to ensure that the aftermarket bumper integrates seamlessly with the FJ Cruiser's structure, providing a secure mounting point while maintaining the intended functionality of the vehicle's onboard safety systems.

• Vehicle-specific design ensures precise fitment for 2007-2014 Toyota FJ Cruiser models.
• Required for the installation of ARB Bumper part number 3420210.
• Engineered for compatibility with factory safety systems and crumple zones.
• Comprehensive kit includes all necessary hardware for chassis mounting.
• Manufacturer Part Number: 6173022.