Fits select 1997-2013 Chevrolet Corvette and 2004-2009 Cadillac XLR models. The Power Stop Z23 Evolution Sport Brake Kit (K1563) is a performance-oriented rear axle upgrade designed to replace standard factory components with high-friction carbon-fiber ceramic pads and precision-engineered drilled and slotted rotors. This bolt-on kit provides a significant increase in stopping power and heat dissipation for daily-driven performance vehicles without requiring modifications.

• Z23 Carbon-Fiber Ceramic Compound: Offers superior braking torque and thermal stability compared to traditional ceramic pads.
• Drilled & Slotted Rotors: Precision-machined for maximum cooling and effective gas/debris evacuation during spirited driving.
• Corrosion Resistance: Rotors feature a silver zinc plating to protect against rust and maintain a clean aesthetic behind the wheels.
• Low-Dust Formula: Third-party validated to produce significantly less dust than OE pads, keeping wheels cleaner for longer.
• Quiet Operation: Equipped with multi-layer rubberized shims for effective noise damping and vibration control.
• Complete Installation Kit: Includes Z23 pads, two drilled and slotted rotors, stainless-steel hardware, and high-temperature ceramic lubricant (MPN: K1563).

Fits select 1997-2004 Chevrolet Corvette and 2004-2009 Cadillac XLR models.

The Power Stop Z23 Evolution Sport Brake Upgrade Kit is a complete bolt-on solution designed for drivers looking to improve stopping power and reduce brake dust on their daily driver. This front kit replaces your worn factory components with a matched set of high-performance pads and rotors engineered for maximum thermal efficiency and bite without the noise or dust of traditional metallic pads.

• Carbon-Fiber Ceramic Pads: The Z23 Evolution compound offers a significant performance increase over standard ceramic pads and has been third-party validated to produce an average of 30% less dust than OE pads.
• Drilled & Slotted Rotors: Precision-drilled holes provide maximum cooling during heavy use, while rounded slots sweep away gas and debris to maintain a clean contact patch.
• Corrosion Resistance: Each rotor is finished with silver zinc plating to prevent rust and maintain a clean appearance behind your wheels.
• Noise-Free Operation: Premium multi-layer rubberized shims insulate against vibration for virtually silent braking performance.
• Complete Hardware Kit: Includes stainless-steel installation hardware and high-temperature ceramic brake lubricant for a professional installation.
• Manufacturer Part Number: K1559

Fits select 2003-2023 Toyota 4Runner, FJ Cruiser, and Tacoma.

The Power Stop Z36 Truck & Tow Brake Upgrade Kit is engineered for vehicles that face the added stress of towing, hauling, and off-road use. This complete front axle kit replaces your factory components with severe-duty upgrades designed to dissipate heat and improve stopping power under heavy loads. The proprietary Z36 carbon-fiber ceramic brake pads provide the friction needed for mountain descents and oversized tires while maintaining low-dust performance and everyday drivability.

The included performance rotors are drilled and slotted to maximize cooling and maintain a clean contact patch between the pad and rotor surface. To ensure long-term durability, the rotors are finished with a silver zinc plating to resist rust and corrosion in harsh environments.

• Carbon-fiber reinforced ceramic Z36 pads for superior stopping power with heavy loads
• Drilled and slotted rotors provide maximum heat dissipation and gas venting
• Zinc-plated rotors for enhanced corrosion resistance
• Low-dust braking performance, validated to produce 30% less dust than OE pads
• Premium stainless steel hardware and high-temperature lubricant included
• Direct bolt-on fitment replaces factory components with no modifications required

Includes: (2) Drilled and Slotted Front Brake Rotors, (1) Set of Z36 Carbon-Fiber Ceramic Brake Pads, Stainless Steel Hardware Kit, and Ceramic Brake Lubricant.

Fits select 2003-2023 Toyota 4Runner, FJ Cruiser, and Tacoma.

The Power Stop Z23 Evolution Sport Brake Upgrade Kit is a complete bolt-on solution designed to increase stopping power and reduce brake dust on your daily driver. This front-axle kit replaces worn factory components with performance-engineered rotors and pads that maintain a cool, smooth ride under increased thermal loads.

The Z23 Carbon-Fiber Ceramic compound provides significantly more bite than traditional ceramic pads without the heavy dust associated with high-performance friction. In 3rd-party on-vehicle testing, this formula showed an average of 30% less dust compared to OE pads. The kit also includes drilled and slotted rotors for maximum heat dissipation and zinc plating to prevent rust and corrosion.

• Carbon-Fiber Ceramic Z23 compound for enhanced braking performance
• Drilled and slotted rotors for superior cooling and gas venting
• Zinc-plated rotors for maximum protection against corrosion
• Multi-layer rubberized shims for virtually noise-free operation
• Stainless steel installation hardware and high-temperature lubricant included
• Direct bolt-on upgrade requires no modifications to stock braking system
• Manufacturer Part Number: K137

Fits select 2005-2020 Subaru Impreza WRX STI, WRX STI, and WRX models. The Power Stop Z26 Street Warrior Brake Upgrade Kit is engineered for high-performance street vehicles and modified cars that require increased thermal capacity and shorter stopping distances.

This comprehensive front-axle kit replaces your factory components with high-performance drilled and slotted rotors and Z26 Carbon-Fiber Ceramic brake pads. The Z26 formula provides superior heat dissipation compared to standard ceramic pads, making it ideal for high-horsepower applications and spirited driving. The rotors feature a silver zinc plating to resist rust and corrosion, maintaining a clean look behind your wheels. Every kit includes premium stainless-steel hardware and high-temperature lubricant to ensure a quiet, bolt-on installation without the need for vehicle modifications.

• Carbon-Fiber Ceramic Z26 Pads: Designed for high-speed stopping power with a low-dust formula validated by 3rd party testing.
• Drilled & Slotted Rotors: Maximum cooling and debris clearance for consistent braking performance under load.
• Zinc Plated Finish: Protects rotors against oxidation and environmental corrosion.
• Stainless Steel Hardware: Includes shims and installation hardware to resist high temperatures and ensure pad longevity.
• Direct Fit: Bolts directly to factory mounting points as a complete performance upgrade.
• MPN: K131-26

Fits select 2005-2020 Subaru Impreza, WRX, and WRX STI models.

Upgrade your vehicle's braking performance with the Power Stop Z23 Evolution Sport Brake Upgrade Kit. This complete front axle kit replaces your worn factory components with a high-performance bolt-on solution designed for the daily driver who wants more stopping power without the mess of traditional performance pads. The kit features Z23 Carbon-Fiber Ceramic pads that have been third-party validated to produce an average of 30% less dust than original equipment, keeping your wheels cleaner for longer.

Paired with these low-dust pads are precision-machined drilled and slotted rotors. The drill holes provide maximum cooling during heavy use, while the slots sweep away gas and debris to maintain a consistent contact patch. Every rotor is finished with a silver zinc plating to defend against rust and corrosion. This kit includes everything required for a professional installation, including premium stainless-steel hardware and high-temperature ceramic lubricant.

• Carbon-Fiber Ceramic Compound: Z23 Evolution pads offer significantly higher friction than standard ceramic pads.
• Drilled & Slotted Rotors: Engineered for maximum heat dissipation and debris evacuation.
• Zinc Plated: Rotors are treated to resist corrosion and maintain a clean appearance.
• Noise-Free Braking: Multi-layer rubberized shims insulate against vibration and squeal.
• Low Dust Formula: Validated through on-vehicle testing in Los Angeles to be 30% cleaner than OE.
• Complete Hardware Kit: Includes stainless-steel clips and high-temp brake grease.
• Manufacturer Part Number: K131

Fits select 1997-2015 Acura ILX and Honda Civic and Prelude models.

The Power Stop Z26 Street Warrior Brake Upgrade Kit (K1243-26) is a comprehensive rear brake solution engineered for high-performance street vehicles. This kit replaces worn factory components with precision-matched drilled and slotted rotors paired with carbon-fiber ceramic pads, specifically designed to handle the increased thermal demands of spirited driving and modified vehicles.

• Carbon-Fiber Ceramic Z26 Pads: These high-performance pads feature a proprietary formula that enhances heat dissipation compared to standard ceramic pads, ensuring reliable stopping power at high speeds without brake fade.
• Drilled & Slotted Rotors: Precision-drilled holes provide maximum cooling during extreme use, while rounded slots sweep away gas, dust, and moisture for consistent pad contact.
• Zinc Plated Finish: Each rotor is silver zinc plated to provide maximum protection against rust and corrosion, maintaining a clean look behind your wheels.
• Low-Dust & Low-Noise: Third-party on-vehicle testing in Los Angeles validated a 30% reduction in dust compared to OE pads, using a carbon-fiber formula that maintains quiet operation.
• Complete Installation Kit: Includes premium stainless-steel hardware, stainless-steel shims for improved heat resistance, and high-temperature ceramic brake lubricant.

Designed as a direct bolt-on upgrade, this kit requires no modifications to your factory braking system, providing an accessible way to improve the performance and aesthetics of your vehicle.

Fits select 1997-2015 Acura ILX, Honda Civic, and Honda Prelude models (including EX, Si, and Hybrid trims).

The Power Stop K1243 Z23 Evolution Sport Rear Brake Kit is a complete bolt-on upgrade designed for daily drivers seeking improved stopping power without the noise and dust of traditional performance pads. This kit replaces factory rear brake components with precision-engineered parts designed to work together, offering a significant upgrade over standard ceramic or semi-metallic pads.

The Z23 carbon-fiber ceramic pads are formulated to provide high friction levels for responsive braking while maintaining a low-dust profile, validated in 3rd-party testing to produce 30% less dust than original equipment. The included drilled and slotted rotors facilitate maximum cooling for the braking surface and help sweep away debris, ensuring consistent performance during repeated use. Each rotor is zinc-plated to resist rust and corrosion, maintaining both performance and appearance behind the wheels.

• Carbon-fiber ceramic Z23 compound for enhanced braking torque
• Drilled and slotted rotors for superior heat dissipation and gas venting
• Zinc-plated rotors provide maximum protection against corrosion
• Multi-layer rubberized shims ensure virtually noise-free operation
• Includes premium stainless-steel hardware and high-temperature ceramic lubricant
• Manufacturer Part Number: K1243

Fits 1995-2004 Toyota 4Runner and Tacoma (All Trims).

The Power Stop Z36 Truck & Tow Brake Upgrade Kit is engineered to handle the increased stress of towing, hauling, and off-road driving. This complete front brake system replaces factory components with a severe-duty setup designed to maintain consistent stopping power and thermal stability under heavy loads.

The kit features drilled and slotted rotors that maximize heat dissipation to prevent brake fade during long mountain descents. These are paired with Z36 Carbon-Fiber Ceramic brake pads, which provide superior bite compared to traditional ceramic compounds while producing 30% less dust than original equipment. Every rotor is finished with silver zinc plating to resist rust and corrosion in harsh environments.

• Carbon-Fiber Ceramic Z36 pads provide severe-duty stopping power with low-dust performance.
• Drilled and slotted rotors optimize cooling and maintain a clean pad-to-rotor interface.
• Silver zinc plating protects against corrosion for increased longevity.
• Premium stainless-steel shims and hardware resist high operating temperatures.
• Direct bolt-on installation to factory mounting points with no modifications required.
• Includes high-temperature ceramic brake lubricant and installation hardware.
• Manufacturer Part Number: K1233-36

Fits 1995-2002 Toyota 4Runner and 1995-2004 Toyota Tacoma. This Power Stop Z23 Evolution Sport Brake Upgrade Kit (K1233) provides a complete, bolt-on solution to improve braking performance and reduce dust on your daily driver without requiring vehicle modifications.

Engineered for consistent stopping power, the kit features Z23 Carbon-Fiber Ceramic pads that produce approximately 30% less dust than original equipment, as validated in 3rd party on-vehicle testing. The pads are paired with drilled and slotted rotors that maximize cooling and help maintain a clean contact patch for smooth, noise-free operation. To ensure long-term durability, the rotors are finished with silver zinc plating to prevent rust and corrosion in harsh environments.

• Carbon-Fiber Ceramic Z23 Compound: Significantly enhances thermal stability and stopping power compared to traditional ceramic pads.
• Drilled & Slotted Rotors: Cast to OE tolerances with precision drill holes for cooling and slots to sweep away gas and debris.
• Noise Reduction: Multi-layer rubberized shims dampen vibrations for virtually silent braking.
• Corrosion Protection: Zinc plating on rotors protects against rust and maintains a clean look behind the wheels.
• Complete Hardware Kit: Includes stainless steel installation hardware and high-temperature ceramic brake lubricant.
• MPN: K1233

Fits select 1998-2010 Lexus GS300, GS400, GS430, IS300, and SC430.

The Power Stop Z23 Evolution Sport Rear Brake Kit (K1149) provides a significant performance upgrade over stock braking systems for daily drivers. This comprehensive kit replaces worn factory components with precision-engineered carbon-fiber ceramic pads and drilled and slotted rotors to deliver increased stopping power and better heat management.

The Z23 Carbon-Fiber Ceramic compound is validated through third-party testing to produce an average of 30% less dust than original equipment, keeping your wheels cleaner. The included rotors feature silver zinc plating for superior corrosion resistance, while the drilled holes and slots ensure the braking surface stays cool and clear of gas and debris during operation.

• Direct Bolt-On: Engineered to fit factory mounting points without any vehicle modifications.
• Carbon-Fiber Ceramic Pads: Z23 compound significantly enhances braking bite and reduces brake fade.
• Drilled & Slotted Rotors: Precision-machined for maximum cooling and consistent friction contact.
• Noise-Free Performance: Equipped with multi-layer rubberized shims to eliminate vibrations and squeal.
• Complete Installation Kit: Includes premium stainless steel hardware and high-temperature ceramic brake lubricant.

Fits select 2005-2019 Infiniti (G25, G35, G37, M35, M37, M45, M56, Q40, Q70, QX50, QX70) and Nissan (350Z, 370Z).

The Power Stop Z23 Evolution Sport Brake Upgrade Kit (K112) provides everything needed for a bolt-on performance improvement for your front braking system. Designed for daily drivers seeking increased stopping power without compromising street manners, this kit replaces worn OE components with a performance-matched pad and rotor combination.

• Z23 Carbon-Fiber Ceramic Compound: Offers enhanced thermal stability and increased braking torque versus standard ceramic pads.
• Performance Rotors: Drilled and slotted design maximizes heat dissipation and maintains a clean pad surface for consistent bite.
• Corrosion Resistance: Rotors are finished with silver zinc plating to prevent rust and maintain a clean appearance behind the wheels.
• Low-Dust Formulation: On-vehicle testing shows an average 30% reduction in dust compared to factory pads.
• Installation Ready: Includes stainless-steel mounting hardware, multi-layer rubberized shims for noise reduction, and high-temperature brake lubricant.

Fits select 1993-2010 Lexus GS300, GS400, GS430, IS300, and SC430.

The Power Stop Z23 Evolution Sport Brake Upgrade Kit (K1077) is a comprehensive front-axle solution for drivers looking to enhance the braking performance of their daily driver. This kit replaces worn factory components with a matched set of high-performance pads and rotors engineered for increased stopping power and reduced fade during spirited driving.

• Carbon-Fiber Ceramic Z23 Compound: Provides a significant upgrade over traditional ceramic pads, delivering high-friction performance while remaining street-friendly.
• Low-Dust Formula: Third-party on-vehicle testing shows an average of 30% less dust compared to original equipment pads.
• Drilled & Slotted Rotors: Precision-drilled holes and rounded slots maximize cooling and effectively sweep away gas, dust, and moisture for consistent contact.
• Corrosion Protection: Rotors are finished with silver zinc plating to prevent rust and maintain a clean appearance behind the wheels.
• Noise Reduction: Multi-layer rubberized shims provide virtually silent braking by damping vibrations.
• Complete Hardware Kit: Includes stainless steel installation clips and high-temperature ceramic brake lubricant for a professional-grade installation.

This bolt-on upgrade is engineered to fit the factory mounting points without modification, providing a reliable and durable performance improvement for your Lexus braking system.

Fits select 2002-2021 Honda Accord, Civic, CR-V, CR-Z, Element, and 2014-2015 Acura ILX models.

The Power Stop Z23 Evolution Sport Front Brake Kit (K1043) is an engineered bolt-on upgrade designed for daily drivers seeking increased stopping power without the noise and dust associated with track pads. This complete kit replaces your factory front braking components with performance-matched Z23 carbon-fiber ceramic pads and G3000-cast drilled and slotted rotors, providing a significant thermal capacity increase and more consistent pedal feel.

• Carbon-Fiber Ceramic Pads: The Z23 compound offers superior braking performance compared to standard ceramic, with third-party testing showing an average of 30% less dust than OE pads.
• Drilled & Slotted Rotors: Precision-drilled holes maximize cooling while slots sweep away debris and gas for constant pad-to-rotor contact.
• Corrosion Resistance: Rotors are finished with silver zinc plating to protect against rust and maintain a clean appearance behind the wheels.
• Noise-Free Performance: Multi-layer rubberized shims insulate against vibrations to ensure virtually silent braking.
• Complete Installation Kit: Includes premium stainless-steel hardware and high-temperature ceramic lubricant to ensure a smooth, professional installation.
• MPN: K1043

Fits select 2003-2005 Infiniti G35 and Nissan 350Z models. The Power Stop Z23 Evolution Sport Brake Kit (K103) is a comprehensive rear-axle upgrade designed to enhance the stopping power and heat dissipation of your daily driver. This kit replaces worn factory components with a matched set of performance pads and rotors engineered for a direct, bolt-on installation using existing mounting points.

The Z23 Evolution Sport kit features carbon-fiber ceramic brake pads that offer significantly better thermal stability compared to standard ceramic compounds. Validated through third-party testing, these pads produce approximately 30% less dust than original equipment, keeping wheels cleaner while maintaining a noise-free experience thanks to multi-layer rubberized shims. The included performance rotors are precision drilled and slotted to maximize cooling and gas evacuation, protected by a silver zinc plating to prevent rust and corrosion on non-friction surfaces.

• Carbon-fiber ceramic Z23 compound for superior braking performance
• Drilled and slotted rotors for maximum heat dissipation and gas venting
• Silver zinc plating provides long-lasting corrosion resistance
• Low-dust formula validated by third-party testing
• Stainless steel installation hardware and high-temperature lubricant included
• Direct bolt-on upgrade; no vehicle modifications required
• Manufacturer Part Number: K103

Fits 2014-2019 Chevrolet Corvette.

The BMR Suspension 15-inch Rear Brake Conversion Kit (DBK573) is engineered for C7 owners who need to fit a smaller 15-inch wheel setup for drag racing applications. Standard factory brakes on the 2014-2019 Corvette are too large to clear most 15-inch wheels; this kit replaces those bulky components to provide the necessary clearance while maintaining reliable stopping performance.

This kit features high-performance drilled and slotted rotors designed to vent gases and dissipate heat effectively under high-load conditions. The included red calipers provide a clean, performance-oriented aesthetic while ensuring consistent clamping force.

• Specifically engineered for 15-inch wheel conversions on C7 models
• Drilled and slotted rotors for improved thermal management and gas venting
• Red powder-coated calipers for durability and visual appeal
• Replaces oversized factory rear brake components
• Manufacturer Part Number: DBK573

Fits 2014-2019 Chevrolet Corvette C7 models.

The BMR Suspension 15-inch rear brake conversion kit (DBK572) is engineered for Corvette owners looking to maximize traction at the drag strip. By downsizing the rear brake assembly, this kit provides the necessary clearance to install 15-inch diameter drag wheels, allowing for a taller tire sidewall and improved 60-foot times.

This comprehensive kit features high-performance black powder-coated calipers and precision-machined drilled and slotted rotors. These rotors are designed to reduce rotating mass while maintaining consistent heat dissipation during heavy braking at the end of a pass.

• Enables fitment of 15-inch drag wheels for improved traction
• Includes two black powder-coated brake calipers
• Drilled and slotted rotors for superior heat management and weight reduction
• Designed specifically for the C7 Corvette chassis
• Manufacturer Part Number: DBK572

Fits 2014-2017 Chevrolet SS.

The BMR Suspension 15-inch Brake Conversion Kit (DBK353) is specifically engineered for owners looking to run smaller diameter wheels for drag racing. While the factory Brembo rear brakes provide excellent stopping power, their size prevents the installation of 15-inch wheels, which are preferred for their increased tire sidewall. This kit replaces the bulky OE components with a low-profile alternative designed to clear 15-inch wheel barrels.

• Wheel Compatibility: Engineered to provide the necessary clearance for 15-inch drag wheels.
• High-Performance Rotors: Features drilled and slotted rotors to manage heat and maintain a clean contact patch.
• Durable Finish: Includes calipers finished in a vibrant red powder coat for corrosion resistance and a performance aesthetic.
• Complete Conversion: Specifically designed for the 2014-2017 Chevrolet SS (Zeta II chassis) to ensure proper fitment and operation.
• Manufacturer Part Number: DBK353