Fits 2000-2004 Ford F-350 Super Duty (Harley-Davidson, King Ranch, Lariat, XL, and XLT models).

The Power Stop Z36 Truck & Tow Brake Upgrade Kit is engineered specifically for vehicles that face the high-demand stress of towing, hauling, and navigating steep grades. This complete rear brake system replaces your factory components with high-performance hardware designed to manage increased thermal loads without sacrificing everyday drivability.

This kit features proprietary Carbon-Fiber Ceramic Z36 brake pads, which provide severe-duty stopping power with significantly less dust than original equipment. These are paired with drilled and slotted rotors that maximize heat dissipation and maintain a clean contact patch for consistent friction. To ensure long-term durability and a custom look, the kit includes red powder-coated calipers that resist corrosion in harsh environments.

• Carbon-Fiber Ceramic Pads: Reinforced compound designed for heavy loads and validated to produce 30% less dust than OE pads.
• Drilled & Slotted Rotors: Precision-machined for maximum cooling and zinc-plated to prevent rust and corrosion.
• Powder Coated Calipers: Red high-temp finish provides a durable barrier against road debris and weather.
• Premium Hardware: Includes stainless steel shims and installation hardware for a direct bolt-on fit.
• Complete Kit: Includes rear calipers, rotors, Z36 brake pads, and high-temperature ceramic lubricant (KC1889A-36).

Fits select 2007-2020 Acura MDX, RLX, ZDX, and Honda Pilot.

The Power Stop Z23 Evolution Sport Brake Upgrade Kit K5370 is a comprehensive bolt-on solution engineered to increase stopping power and significantly reduce brake dust on your daily driver. This front-axle kit replaces worn factory components with a matched set of high-performance Carbon-Fiber Ceramic pads and Drilled & Slotted rotors, providing improved thermal stability and consistent pedal feel without the need for vehicle modifications.

• Carbon-Fiber Ceramic Z23 compound offers enhanced bite and performance compared to traditional ceramic pads.
• Low-dust formula validated by independent 3rd party testing to produce an average of 30% less dust than original equipment.
• Precision drilled and slotted rotors maximize cooling and help evacuate gas and debris for smoother braking under load.
• Silver zinc plating provides superior protection against rust and corrosion on all non-friction rotor surfaces.
• Premium multi-layer rubberized shims isolate vibration for virtually noise-free operation.
• Complete installation kit includes stainless steel hardware and high-temperature ceramic brake lubricant.
• Manufacturer Part Number: K5370

Fits select 2006-2020 Subaru WRX, Outback, Legacy, and Tribeca.

The Power Stop Z26 Street Warrior Brake Upgrade Kit (KC4603-26) is engineered for performance-oriented street vehicles that require increased stopping power. This complete front axle solution replaces worn factory components with a high-friction upgrade designed to handle high-heat conditions without fading. The kit features Z26 Carbon-Fiber Ceramic pads that dissipate heat more efficiently than standard ceramic materials while maintaining a low-dust profile—validated through third-party testing to produce 30% less dust than original equipment.

• Red powder-coated calipers offer superior corrosion resistance and a performance aesthetic behind the wheels.
• Drilled and slotted rotors maximize cooling and sweep away gas and debris for consistent pad contact.
• Silver zinc-plated rotors provide a durable barrier against rust and oxidation.
• Includes Z26 Carbon-Fiber Ceramic brake pads for enhanced high-speed braking performance.
• Premium stainless steel shims ensure quiet, low-noise operation.
• Complete kit includes stainless steel installation hardware and high-temperature ceramic brake lubricant.

Fits select 1988-2000 Cadillac Escalade, Chevrolet Blazer, K1500, K1500 Suburban, K2500, and Tahoe, and GMC K1500, K1500 Suburban, K2500, K2500 Suburban, and Yukon models.

The Power Stop Z36 Truck & Tow Brake Kit with Powder Coated Calipers is engineered for drivers who demand superior stopping power under heavy loads. Whether you are towing a trailer, hauling gear for the job site, or navigating steep mountain descents, this front brake upgrade replaces your worn factory components with a system designed for high thermal capacity. The Z36 Carbon-Fiber Ceramic pads provide the severe-duty friction needed for trucks and SUVs without the excessive noise or dust of traditional metallic pads.

This complete bolt-on kit features drilled and slotted rotors to maximize heat dissipation and prevent brake fade. The included red powder-coated calipers are treated with a high-temperature electrostatic finish to resist corrosion and road debris. Every component is designed to install directly to factory mounting points with no modifications required.

• Z36 Carbon-Fiber Ceramic Pads: Reinforced compound designed for towing and heavy loads with 30% less dust than OE braking.
• Drilled & Slotted Rotors: Precision-cast rotors feature silver zinc plating for maximum rust protection and cooling.
• Red Powder Coated Calipers: Remanufactured and treated with high-temp powder coating to maintain a fresh look and long-term durability.
• Stainless Steel Hardware: Includes high-grade shims and installation hardware for a quiet, reliable service life.
• MPN: KC1970-36

Fits 2012-2019 Fiat 500 models including Abarth, Turbo, Pop, and Lounge.

The Power Stop Z23 Evolution Sport Brake Kit (K6426) is a complete front-end bolt-on upgrade designed for daily drivers seeking increased stopping power without the compromise of excessive dust or noise. This kit replaces your factory components with performance-engineered hardware to enhance thermal management and pad bite during spirited driving or daily commuting.

• Z23 Carbon-Fiber Ceramic Compound: Specifically formulated for significantly higher friction than standard ceramic pads while maintaining a low-dust formula validated by third-party testing.
• Drilled & Slotted Rotors: Precision-drilled holes provide maximum cooling to prevent brake fade, while slots sweep away gas and debris for consistent pad contact.
• Corrosion Protection: Rotors are finished with silver zinc plating to protect against rust and maintain a clean appearance behind your wheels.
• Quiet Performance: Multi-layer rubberized shims insulate against vibration to provide virtually noise-free braking.
• Complete Installation Kit: Includes premium stainless-steel hardware and high-temperature ceramic brake lubricant for a professional-grade service.

Manufacturer Part Number: K6426

Fits select 2005-2023 Chrysler 300, Dodge Challenger, Charger, and Magnum models.

The Power Stop Z23 Evolution Sport Brake Upgrade Kit (K4583) is a comprehensive bolt-on solution designed to enhance the braking performance of your daily driver. This kit replaces standard OE components with high-performance carbon-fiber ceramic pads and precision-engineered drilled and slotted rotors, providing increased stopping power without the typical mess of traditional brake systems.

At the core of this kit is the Z23 carbon-fiber ceramic compound, which has been 3rd-party validated on-vehicle to produce an average of 30% less dust compared to OE pads. The included rotors feature a drilled and slotted pattern to maximize cooling and maintain a clean contact surface, while a silver zinc plating provides essential protection against rust and corrosion. Each kit includes premium stainless-steel hardware and multi-layer rubberized shims to ensure a quiet, noise-free installation.

• MPN: K4583
• Pad Material: Carbon-Fiber Ceramic Z23 Compound
• Rotor Style: Drilled & Slotted for maximum cooling
• Finish: Silver Zinc Plated rotors for corrosion resistance
• Shims: Multi-layer rubberized shims for noise reduction
• Hardware: High-quality stainless-steel installation kit included
• Lubricant: High-temperature ceramic brake lubricant included

Fits select 2003-2008 Honda Accord and Acura TSX models.

The Power Stop Z23 Evolution Sport Brake Upgrade Kit (K2391) provides a complete rear bolt-on solution for drivers looking to improve stopping power on their daily-driven vehicles. This kit replaces worn factory components with a matched set of carbon-fiber ceramic pads and high-performance drilled and slotted rotors, delivering a smooth, confident brake feel without the heavy dust associated with metallic pads.

Each rotor is precision-drilled for maximum cooling and slotted to sweep away gas and debris during braking. To ensure long-term durability, the rotors are finished with silver zinc dichromate plating to resist rust and corrosion. The Z23 carbon-fiber ceramic compound is engineered for a low-dust formula—validated in 3rd party testing to produce an average of 30% less dust than OE pads—while multi-layer rubberized shims provide virtually noise-free operation.

• Z23 Carbon-Fiber Ceramic Compound: Significantly enhances braking performance over standard ceramic pads with a low-dust formula.
• Drilled & Slotted Rotors: Engineered for maximum heat dissipation and keeping the pad surface clean for consistent contact.
• Zinc Plated Protection: Silver zinc dichromate plating protects against rust and corrosion on the hub and internal vanes.
• Stainless-Steel Hardware: Includes all necessary premium hardware and high-temperature ceramic lubricant for a complete installation.
• Noise-Free Braking: Features multi-layer rubberized shims to dampen vibrations and eliminate brake squeal.
• Direct Fit: A complete bolt-on upgrade that requires no modifications to the factory braking system.
• Manufacturer Part Number: K2391

Fits select 1999-2018 Chevrolet Silverado 1500 and GMC Sierra 1500 models.

The Wilwood TX4R Tactical Xtreme rear brake kit is engineered for high-demand applications, providing the increased clamping force and thermal capacity necessary for trucks equipped with oversized wheel and tire packages or heavy towing requirements. This kit features high-strength TX4R four-piston radial mount calipers finished in a durable red powder coat. These calipers are paired with massive 16.00-inch diameter, 1.25-inch thick drilled and slotted (D&S) rotors that maximize cooling and gas venting for consistent performance under heavy load.

• Manufacturer Part Number: 140-16861-DR
• Caliper Type: TX4R 4-Piston (Red Powder Coat)
• Rotor Dimensions: 16.00" Diameter x 1.25" Thick
• Rotor Style: Drilled and Slotted
• Mount Type: Radial Mount
• Position: Rear

Fits 2010-2015 Lexus GX460 and Toyota 4Runner models.

The Power Stop Z36 Truck & Tow Brake Upgrade Kit (KC5873-36) is a comprehensive front-end solution engineered for vehicles that face the thermal stress of towing, hauling, and off-road driving. This kit provides a significant performance increase over factory braking systems by utilizing severe-duty components that maintain stopping power during long mountain descents and under heavy loads.

This kit features Z36 Carbon-Fiber Ceramic brake pads, which combine the low-dust benefits of a ceramic compound with the friction stability of carbon-fiber reinforcement. These are paired with precision drilled and slotted rotors that maximize airflow to keep temperatures down and prevent brake fade. The included red powder-coated calipers are treated with a high-temperature finish for lasting corrosion resistance and a distinct appearance behind the wheels.

• Z36 Carbon-Fiber Ceramic pads designed for superior stopping power under load
• Drilled and slotted rotors optimize heat dissipation and gas venting
• Red powder-coated calipers provide high-heat durability and rust protection
• Zinc-plated rotors resist corrosion and maintain a clean look
• Stainless steel installation hardware and high-temp ceramic lubricant included
• Low-dust friction compound validated to produce 30% less dust than OE pads
• Manufacturer Part Number: KC5873-36

The Power Stop Z36 Truck & Tow Brake Upgrade Kit with Powder Coated Calipers provides the superior stopping power required for 2012-2020 Ford F-150 trucks used for towing, hauling, or navigating mountainous terrain. This complete front-axle system addresses the heat and stress of heavy-duty applications by replacing factory components with performance-engineered rotors, pads, and calipers.

This kit features Z36 Carbon-Fiber Ceramic brake pads, which offer severe-duty braking performance while maintaining 30% less dust than original equipment. The included drilled and slotted rotors are designed to maximize heat dissipation and are zinc-plated to protect against rust. To ensure long-term durability and a custom look, the kit includes remanufactured calipers finished in a high-temperature red powder coating.

• Engineered for Trucks: Specifically tuned for the added stress of towing, hauling, and lifted truck configurations.
• Z36 Carbon-Fiber Ceramic Pads: Proprietary compound offers high friction and bite without the excessive noise or dust of metallic pads.
• Drilled & Slotted Rotors: Precision-drilled holes for cooling and rounded slots to sweep away gas and debris during braking.
• Red Powder Coated Calipers: Durable high-temp finish resists corrosion and maintains a clean appearance behind the wheels.
• Zinc Plating: Rotors are plated to provide maximum protection against rust and environmental wear.
• Hardware Included: Comes with premium stainless-steel shims, installation hardware, and high-temperature ceramic lubricant.
• Bolt-On Installation: Designed to fit factory mounting points with no modifications required.
• MPN: KC3167A-36

Fits select 2010-2021 Ford Expedition, 2010-2011 Ford F-150, and 2010-2021 Lincoln Navigator.

The Power Stop Z36 Truck & Tow Brake Upgrade Kit (KC3167-36) is a comprehensive front-end solution engineered for vehicles subjected to heavy loads, towing, and mountainous terrain. This complete bolt-on kit replaces worn OE components with high-performance hardware designed to manage the extreme heat and stress of severe-duty applications. The kit includes Carbon-Fiber Ceramic pads for superior stopping power, drilled and slotted rotors for thermal management, and remanufactured calipers finished in a durable red powder coating.

• Z36 Carbon-Fiber Ceramic Pads: Reinforced compound designed to handle the added weight of trailers and hauled loads while maintaining low-dust performance.
• Drilled & Slotted Rotors: Precision-machined to maximize heat dissipation and sweep away gas and debris, keeping brake temperatures consistent during long descents.
• Powder Coated Calipers: Remanufactured in the USA, these calipers feature a high-temperature red powder coating that resists corrosion and debris.
• Zinc Plated Protection: Rotors are treated with silver zinc plating to prevent rust and maintain a clean appearance behind the wheels.
• Complete Installation Hardware: Includes premium stainless-steel shims, hardware, and high-temperature ceramic lubricant.
• Validated Performance: On-vehicle 3rd party testing in Los Angeles demonstrated an average 30% reduction in dust compared to original equipment pads.

Fits select 2007-2021 Chrysler Aspen, Dodge Durango, Ram 1500, and Ram 1500 Classic.

The Power Stop Z36 Truck & Tow Brake Upgrade Kit with Powder Coated Calipers is engineered for heavy-duty applications including towing, hauling, and navigating steep mountain grades. This complete front-end kit replaces factory components with high-performance hardware designed to handle the increased thermal stress of lifted trucks and 4x4s. The Z36 Carbon-Fiber Ceramic pads provide high-torque stopping power while maintaining low-dust performance, validated through 3rd party testing to produce an average of 30% less dust than OE pads.

• Proprietary Z36 Carbon-Fiber Ceramic pads offer severe-duty braking performance without sacrificing everyday drivability.
• Drilled and slotted rotors maximize heat dissipation and keep brake temperatures down during critical descents.
• Red high-temp powder-coated calipers resist corrosion and maintain a clean appearance behind the wheels.
• Zinc-plated rotors provide a durable barrier against rust and oxidation.
• Includes premium stainless-steel hardware, shims, and high-temperature ceramic brake lubricant.
• Direct bolt-on installation requires no modifications to the factory braking system.
• Manufacturer Part Number: KC2163A-36

Fits select 2001-2020 Chevrolet Silverado, Express, Avalanche, and GMC Sierra and Savana 2500 HD/3500 models. Designed for heavy-duty applications, the Power Stop Z36 Truck & Tow Brake Upgrade Kit (KC2071-36) provides the increased thermal capacity and clamping force required for towing, hauling, and mountainous driving.

This comprehensive front-end kit replaces factory components with high-performance alternatives engineered for severe-duty cycles. The Z36 Proprietary Carbon-Fiber Ceramic pads provide a higher coefficient of friction than standard ceramic pads, ensuring fade-free braking under heavy loads. They are paired with precision-machined drilled and slotted rotors that facilitate rapid heat dissipation and gas venting. To ensure long-term reliability and aesthetics, the included calipers are finished in a high-temperature red powder coating, and the rotors feature silver zinc plating for superior corrosion resistance.

• Z36 Carbon-Fiber Ceramic Compound: Formulated for maximum stopping power on heavy trucks and 4x4s with 30% less dust than OE pads.
• Drilled & Slotted Rotors: Precision-drilled holes and rounded slots keep brake temperatures down during long descents.
• Red Powder Coated Calipers: Remanufactured to strict standards with a durable, high-heat finish that resists rust.
• Silver Zinc Plated: Protects rotors from oxidation and corrosion in harsh environments.
• Complete Installation Hardware: Includes premium stainless steel shims, mounting hardware, and high-temperature ceramic lubricant.
• MPN: KC2071-36

Fits select 1999-2013 Chevrolet Silverado 2500/3500, Suburban 2500, Avalanche 2500 and GMC Sierra 2500/3500, Yukon XL 2500.

The Power Stop Z36 Truck & Tow Brake Upgrade Kit is engineered for vehicles that face the extreme demands of towing, hauling, and navigating mountainous terrain. This complete rear axle solution replaces your worn factory components with a high-performance system designed to dissipate heat and provide superior stopping torque under heavy loads. The kit features proprietary carbon-fiber ceramic brake pads that offer severe-duty performance while maintaining low-dust operation and everyday drivability.

This comprehensive package includes drilled and slotted rotors for maximum cooling, along with red powder-coated calipers that provide an aggressive look and long-term corrosion resistance. Every kit comes with premium stainless-steel hardware and high-temperature lubricant to ensure a quiet, trouble-free installation that bolts directly to factory mounting points without modification.

• Carbon-fiber reinforced ceramic Z36 pads provide 30% less dust than OE components based on 3rd party testing.
• Drilled and slotted performance rotors maximize heat dissipation for consistent braking on long descents.
• Red powder-coated calipers feature a high-temp finish to resist rust and debris.
• Zinc-plated rotors offer maximum protection against corrosion.
• Stainless-steel shims and hardware resist high temperatures common in heavy-duty applications.
• Manufacturer Part Number: KC2041-36

Fits 2000-2005 Ford Excursion and 2000-2004 Ford F-250/F-350 Super Duty.

The Power Stop Z36 Truck & Tow Brake Upgrade Kit (KC1890A-36) is engineered for vehicles that face the extreme demands of towing, hauling, and mountain driving. This complete rear brake solution replaces restrictive factory components with a high-performance system designed to manage the thermal stress of heavy loads without sacrificing daily drivability. Featuring Z36 carbon-fiber ceramic pads and drilled and slotted rotors, this kit provides a significant increase in stopping power and thermal capacity.

• Z36 Carbon-Fiber Ceramic Pads: Severe-duty friction compound reinforced with carbon fibers for superior bite; validated to produce 30% less dust than OE pads.
• Drilled & Slotted Rotors: Precision-drilled holes and rounded slots maximize heat dissipation and gas venting; silver zinc plating provides long-lasting protection against rust and corrosion.
• Red Powder Coated Calipers: Performance-coated for durability and aesthetics, these calipers resist corrosion and stand up to high-heat applications.
• Premium Hardware: Includes high-temperature stainless-steel shims, installation hardware, and ceramic brake lubricant for a complete, bolt-on installation.
• Direct Fit: Designed as a direct bolt-on upgrade for stock brake systems with no modifications required.

Fits select 2012-2018 Ford F-150 models including Raptor, Lariat, Platinum, XL, and XLT.

The Power Stop Z36 Truck & Tow Brake Upgrade Kit with Red Powder Coated Calipers is engineered specifically for trucks that handle heavy loads, towing, and steep descents. This comprehensive rear kit replaces your factory components with high-performance hardware designed to manage increased thermal stress without sacrificing everyday drivability. The Z36 carbon-fiber ceramic brake pads offer significantly more bite than standard compounds, while the drilled and slotted rotors work to dissipate heat and clear debris from the friction surface.

Every kit includes rebuilt calipers finished in a durable high-temp red powder coating that resists corrosion and chemicals. The system is a direct bolt-on replacement for the OE setup, requiring no vehicle modifications for installation. All necessary stainless-steel hardware and high-temperature lubricant are included to ensure a quiet, long-lasting service life.

• Carbon-fiber reinforced ceramic brake pads for severe-duty stopping power
• Drilled and slotted rotors maximize cooling and maintain a clean pad surface
• Zinc-plated rotors provide superior protection against rust and corrosion
• Red powder-coated calipers offer high-heat resistance and a custom look
• Low-dust formula validated by third-party testing to produce 30% less dust than OE pads
• Stainless-steel shims and hardware for improved heat dissipation and noise reduction
• Manufacturer Part Number: KC6271-36

Fits select 2003-2008 Dodge Ram 1500, 2500, and 3500 trucks (Laramie, Power Wagon, SLT, Sport, ST, SXT, TRX4).

Engineered for vehicles that work as hard as they play, the Power Stop Z36 Truck & Tow Brake Upgrade Kit provides the severe-duty stopping power required for heavy towing, hauling, and off-road driving. This rear axle kit replaces worn OE components with high-performance hardware designed to handle the increased thermal loads of mountainous descents and heavy trailers. The Z36 carbon-fiber ceramic brake pads offer a higher friction coefficient than standard ceramic pads while maintaining low-dust performance, validated to produce 30% less dust than original equipment.

The included drilled and slotted rotors are precision-machined to maximize heat dissipation and maintain a clean contact patch between the pad and rotor surface. To ensure long-term durability and aesthetic appeal, the rotors are zinc-plated to resist rust, and the calipers are finished in a high-temperature red powder coating. This complete bolt-on kit includes all necessary stainless-steel hardware and premium lubricant for a straightforward installation without vehicle modifications.

• Manufacturer Part Number: KC5490-36
• Carbon-Fiber Ceramic Z36 pads for superior friction under load
• Drilled and slotted rotors for maximum cooling and debris evacuation
• Red high-temp powder-coated calipers for corrosion resistance
• Zinc-plated rotors for lasting protection against rust
• Includes stainless-steel pad shims and installation hardware
• Low-dust formula validated by 3rd party on-vehicle testing

Fits select 2005-2021 Chrysler 300, Dodge Challenger, Dodge Charger, and Dodge Magnum.

The Power Stop Z26 Street Warrior Brake Upgrade Kit is engineered to handle the thermal demands of high-horsepower muscle cars and modified street vehicles. This comprehensive front-end kit replaces your factory components with high-performance hardware designed for shorter stops and superior heat dissipation during spirited driving. The kit includes proprietary Z26 carbon-fiber ceramic pads, drilled and slotted rotors, and fully remanufactured red powder-coated calipers for a complete bolt-on installation.

• Z26 Carbon-Fiber Ceramic Pads: Formulated for high-speed braking with 30% less dust than OE pads, validated through third-party testing.
• Drilled & Slotted Rotors: Precision-machined to provide maximum cooling and maintain a clean contact patch; zinc-plated to resist rust and corrosion.
• Powder-Coated Calipers: Remanufactured with a high-temperature red powder coating that resists fading and protects against the elements.
• Stainless Steel Hardware: Includes premium shims, installation hardware, and high-temperature ceramic lubricant to ensure a quiet, low-vibration fit.
• Direct Fit: Designed to bolt directly to factory mounting points without vehicle modifications.
• Manufacturer Part Number: KC4695-26

Fits 2007-2018 Jeep Wrangler and Wrangler JK (Rubicon, Sahara, Sport, X, and Unlimited trims).

The Power Stop Z36 Truck & Tow Brake Upgrade Kit is engineered to handle the increased thermal stress of towing, hauling, and off-road driving in lifted Jeep Wranglers. This front-axle kit replaces standard factory components with severe-duty Carbon-Fiber Ceramic brake pads and high-performance drilled and slotted rotors to ensure reliable stopping power during mountain descents and heavy-load scenarios.

The included red powder-coated calipers provide a durable finish that resists corrosion while the zinc-plated rotors prevent rust build-up on the cooling vanes. This complete bolt-on system requires no vehicle modifications and includes all necessary stainless steel hardware for a professional installation.

• Proprietary Z36 Carbon-Fiber Ceramic compound for superior stopping power under load
• Drilled and slotted rotors maximize heat dissipation and maintain lower operating temperatures
• Electrostatic powder-coated calipers resist corrosion and high-temperature degradation
• Zinc-plated rotors provide maximum protection against rust on non-friction surfaces
• Low-dust formula validated through 3rd party testing (avg. 30% less dust vs OE)
• Includes stainless-steel shims, installation hardware, and high-temp ceramic lubricant
• Manufacturer Part Number: KC3097-36

Fits 2007-2018 Jeep Wrangler and Wrangler JK models including Rubicon, Sahara, Sport, X, and Anniversary editions.

The Power Stop Z36 Truck & Tow Brake Upgrade Kit with Powder Coated Calipers is a comprehensive rear braking solution engineered specifically for vehicles that handle added stress, such as lifted Jeeps, heavy towing applications, and mountainous terrain. This bolt-on kit replaces your factory rear components with severe-duty hardware designed to maintain performance under high thermal loads without the dust and noise of traditional semi-metallic pads.

At the core of the kit are the Z36 Carbon-Fiber Ceramic brake pads. These pads utilize a proprietary compound that provides superior stopping power for heavy loads while producing 30% less dust than OE pads. They are paired with drilled and slotted rotors that maximize heat dissipation and cooling. The rotors are zinc-plated to resist corrosion, ensuring longevity even in harsh environments. The included red powder-coated calipers provide a durable finish that resists high temperatures and road grime while adding a custom look behind the wheels.

• Carbon-fiber ceramic Z36 brake pads for increased stopping power on heavy-duty applications
• Drilled and slotted rotors for maximum heat dissipation and reduced brake fade
• Red high-temperature powder-coated calipers for corrosion resistance and durability
• Zinc-plated rotors provide long-lasting protection against rust
• Includes premium stainless-steel shims and installation hardware
• Supplied with high-temperature ceramic brake lubricant
• Direct bolt-on fitment with no modifications required
• Manufacturer Part Number: KC3090-36

Fits select 2002-2021 Chrysler Aspen, Dodge Durango, and Ram 1500 / 1500 Classic models.

The Power Stop Z36 Truck & Tow Brake Upgrade Kit is engineered for vehicles that face the added stress of heavy towing, hauling, and mountainous terrain. This comprehensive rear brake solution replaces your worn factory components with a severe-duty system designed to manage high thermal loads without sacrificing daily drivability. By combining carbon-fiber reinforced ceramic pads with performance-matched rotors and calipers, this kit provides the extra bite and fade resistance needed for peace of mind behind the wheel of a loaded truck or SUV.

• Z36 Carbon-Fiber Ceramic Pads: Proprietary compound offers superior stopping power for heavy loads with 30% less dust than OE pads.
• Drilled & Slotted Rotors: Precision-machined to maximize heat dissipation and maintain lower surface temperatures during long descents.
• Red Powder-Coated Calipers: Remanufactured in Chicago, IL, featuring a high-temperature powder coating for maximum corrosion resistance and durability.
• Anti-Rust Protection: Rotors are zinc-plated to prevent oxidation and maintain a clean appearance.
• Premium Hardware: Includes stainless steel shims, installation hardware, and high-temperature ceramic lubricant.

• Manufacturer Part Number: KC2172-36
• Position: Rear
• Caliper Finish: Red Powder Coat
• Pad Material: Carbon-Fiber Ceramic
• Rotor Style: Drilled and Slotted
• Hardware Material: Stainless Steel

Fits 2000-2002 Dodge Dakota and Durango models. Designed for vehicles that handle heavy-duty tasks, the Power Stop Z36 Truck & Tow Brake Upgrade Kit with Powder Coated Calipers provides the superior stopping power required for towing, hauling, and off-road driving.

This complete front brake system (MPN KC2139-36) replaces worn factory components with a high-performance bolt-on solution. The Z36 carbon-fiber ceramic brake pads are engineered to maintain thermal stability under high-load conditions while generating 30% less dust than original equipment. These pads are paired with drilled and slotted rotors that maximize heat dissipation, critical for maintaining performance during long descents or heavy trailering. The included calipers feature a high-temperature red powder coating to resist corrosion and maintain a clean appearance behind the wheels.

• Proprietary Z36 Carbon-Fiber Ceramic Pads: Reinforced compound provides severe-duty stopping power with lower dust and noise levels.
• Drilled & Slotted Rotors: Precision-machined for maximum cooling and debris removal; finished with zinc plating for rust protection.
• Red Powder Coated Calipers: High-temp finish ensures long-term durability and resistance to the elements.
• Stainless Steel Hardware: Includes high-temp shims and premium installation hardware for a secure, rattle-free fit.
• Full Installation Kit: Comes with ceramic brake lubricant and all necessary components for a direct bolt-on upgrade without modifications.

Fits 1999-2005 Ford F-250 Super Duty, F-350 Super Duty, and Excursion models. This Power Stop Z36 Truck & Tow Brake Upgrade Kit (KC1905-36) is engineered for vehicles that face the added stress of towing, hauling, and oversized tires.

This comprehensive front brake solution replaces worn factory components with a severe-duty system designed to handle high thermal loads. The Z36 carbon-fiber ceramic brake pads provide significantly more stopping power than standard compounds without the excessive dust typical of performance pads. Paired with drilled and slotted rotors, this kit ensures maximum heat dissipation and gas venting during long descents and heavy-duty use.

• Carbon-fiber reinforced ceramic Z36 pads offer superior thermal stability for towing and hauling.
• Drilled and slotted rotors maintain lower operating temperatures and prevent brake fade.
• Zinc-plated rotors provide a durable barrier against rust and corrosion.
• Includes red powder-coated calipers for long-lasting protection and a high-performance appearance.
• 3rd-party validated low-dust formula produces an average of 30% less dust than original equipment.
• Stainless-steel installation hardware and premium shims resist high temperatures and prevent noise.
• Complete bolt-on kit includes high-temperature ceramic lubricant; no vehicle modifications required.
• Manufacturer Part Number: KC1905-36

Fits select 2022-2024 Toyota Tundra, 2023-2024 Toyota Sequoia, and 2024 Toyota Tacoma.

The Power Stop Z36 Truck & Tow Brake Upgrade Kit (K8938-36) is engineered for trucks and SUVs that work under heavy loads, including towing, hauling, and navigating steep mountain descents. This rear axle kit provides a significant boost in stopping power and thermal management compared to factory components, making it an essential upgrade for lifted vehicles or those used for severe-duty applications.

• Z36 Carbon-Fiber Ceramic Pads: Reinforced compound provides high-torque stopping power for heavy loads while remaining low-dust and maintenance-friendly.
• Drilled & Slotted Rotors: Precision-machined to maximize heat dissipation and maintain a clean pad-to-rotor contact surface during high-temperature operation.
• Corrosion Protection: Rotors are zinc-plated to resist rust and maintain a clean look behind your wheels.
• Quiet Performance: Premium stainless-steel shims provide superior noise damping and resist the increased heat common in heavy-duty braking.
• Complete Installation Kit: Includes rear rotors, carbon-fiber ceramic brake pads, stainless-steel hardware, and high-temperature ceramic lubricant.

Fits 2022-2024 Toyota Tundra and 2023-2024 Toyota Sequoia (All Trims).

The Power Stop Z36 Truck & Tow Brake Upgrade Kit is engineered to handle the increased thermal stress of towing, hauling, and driving through mountainous terrain. This complete front axle kit replaces factory components with a severe-duty braking solution designed for trucks and SUVs with heavier loads or oversized tires. The Z36 proprietary carbon-fiber ceramic compound provides significant stopping power without the noise or harshness associated with traditional race pads.

Each kit includes Power Stop drilled and slotted rotors that maximize heat dissipation and maintain lower surface temperatures during long descents. These rotors are finished with silver zinc plating to resist corrosion and maintain a clean appearance. The Z36 pads feature premium stainless-steel shims and are validated through third-party testing to produce an average of 30% less dust than original equipment pads.

• Carbon-fiber reinforced ceramic Z36 brake pads for superior bite under heavy load
• Drilled and slotted performance rotors for maximum cooling and debris evacuation
• Silver zinc plating protects rotors against rust and corrosion
• Stainless-steel installation hardware and high-temperature ceramic lubricant included
• Direct bolt-on upgrade; no modifications required to the factory braking system
• Validated low-dust performance (30% less dust than OE)
• Manufacturer Part Number: K8932-36

Fits select 2021-2024 Ram 1500 TRX and 2022-2024 Jeep Wagoneer and Grand Wagoneer models. This Power Stop Z36 Truck & Tow Brake Kit is engineered for heavy-duty applications, providing the increased stopping power required for towing, hauling, and off-road use. This complete rear axle upgrade replaces worn factory components with performance-grade rotors and pads designed to handle the thermal stress of mountainous descents and heavy loads.

• Carbon-Fiber Ceramic Pads: Z36 proprietary compound enhances traditional ceramic with carbon-fiber reinforcement for severe-duty stopping without sacrificing daily drivability.
• Drilled & Slotted Rotors: Precisely drilled holes and cooling slots maximize heat dissipation to keep brake temperatures low during demanding use.
• Rust Protection: Rotors are zinc-plated to resist corrosion and maintain a clean appearance behind the wheels.
• Low-Dust Performance: Third-party validated to produce an average of 30% less dust compared to original equipment (OE) pads.
• Complete Installation: Includes premium stainless-steel hardware, shims to resist high temperatures, and high-temperature ceramic brake lubricant.
• Bolt-On Fitment: Engineered as a direct replacement for stock brakes with no modifications necessary.

Fitment Details:

Fits select 2014-2015 Kia Sorento, 2020-2024 Hyundai Sonata, and 2021-2024 Kia K5.

The Power Stop Z23 Evolution Sport Brake Upgrade Kit (K8809) provides everything you need for a complete bolt-on performance upgrade. Engineered for daily drivers, this kit replaces your standard factory components with a high-friction Z23 carbon-fiber ceramic compound and precision-machined rotors to deliver increased stopping power without compromising driveability.

The Z23 ceramic formula is significantly more effective than traditional ceramic pads, featuring a validated low-dust formula that produces an average of 30% less dust than original equipment. The performance rotors are drilled for maximum cooling and slotted to clear debris, ensuring a clean contact patch. Each rotor is silver zinc-plated to resist rust and corrosion, maintaining a clean look and long service life.

• Carbon-fiber ceramic Z23 compound for enhanced braking torque and performance
• Drilled and slotted rotors for superior heat dissipation and venting
• Silver zinc plating provides maximum protection against rust and corrosion
• Multi-layer rubberized shims ensure virtually noise-free braking
• Validated low-dust formula (average 30% less dust versus OE)
• Includes stainless steel installation hardware and high-temperature ceramic lubricant
• Direct bolt-on upgrade; no vehicle modifications required
• Manufacturer Part Number: K8809

Fits 2021-2024 Ford F-150 and 2022-2024 F-150 Lightning models.

The Power Stop Z36 Truck & Tow Brake Upgrade Kit is engineered to handle the thermal stress of towing, hauling, and heavy-duty 4x4 use. This rear brake system replaces the factory components with a high-performance 350mm rotor and pad combination, specifically designed for vehicles that operate under increased loads. The kit features Z36 carbon-fiber reinforced ceramic brake pads that provide severe-duty stopping power while maintaining low-dust performance, validated through independent testing to produce 30% less dust than original equipment.

The included rotors are precision-drilled and slotted to maximize heat dissipation and prevent brake fade during long mountain descents or repetitive heavy braking. Each rotor is finished with silver zinc plating to protect against rust and corrosion. This complete bolt-on kit includes all necessary stainless-steel hardware and high-temperature lubricant for a professional installation.

• Z36 Carbon-Fiber Ceramic Pads: Enhanced compound strength for heavier loads and superior friction stability.
• Drilled & Slotted 350mm Rotors: Precision cooling holes and slots sweep away gas and debris to maintain consistent pad contact.
• Zinc Plating: Silver zinc finish provides maximum protection against oxidation and rust.
• Premium Hardware: Includes stainless-steel shims and installation hardware for a noise-free, durable service life.
• Manufacturer Part Number: K8765-36

Fits select 2021-2024 Ford F-150, 2022-2024 Ford Expedition, and 2022-2024 Lincoln Navigator.

The Power Stop Z36 Truck & Tow Rear Brake Kit (K8764-36) is a purpose-built upgrade for vehicles subjected to the high-stress demands of towing, hauling, and off-road use. This comprehensive rear axle kit replaces worn factory components with severe-duty hardware designed to maintain consistent stopping power and thermal stability under heavy loads. By combining carbon-fiber reinforced ceramic friction material with precision-machined cooling surfaces, this kit addresses common brake fade issues during long mountain descents or while managing heavy trailers.

• Z36 Carbon-Fiber Ceramic Pads: Proprietary compound reinforced with carbon fibers to provide increased braking torque and high-temperature fade resistance without excessive noise.
• Drilled & Slotted Rotors: Engineered to maximize heat dissipation and exhaust gasses; precision holes keep rotor temperatures down, while rounded slots sweep away moisture and debris.
• Zinc Plating: Rotors are finished with a silver zinc dichromate coating to provide maximum protection against rust and corrosion.
• Low-Dust Performance: Friction formula validated through third-party testing to produce an average of 30% less dust compared to OE pads.
• Complete Installation Kit: Includes premium stainless-steel hardware, shims, and high-temperature ceramic lubricant to ensure a quiet, bolt-on installation using factory mounting points.

Fits select 2018-2024 Jeep Grand Cherokee and Dodge Durango models, including SRT, Trackhawk, Hellcat, and R/T variants.

The Power Stop K8758-26 Z26 Street Warrior Brake Upgrade Kit is engineered for high-horsepower street vehicles that require superior stopping power without sacrificing daily drivability. This complete rear axle kit replaces worn OE components with high-performance drilled and slotted rotors and carbon-fiber ceramic pads designed to manage the extreme thermal loads generated by heavy, high-performance SUVs.

Each kit includes Z26 carbon-fiber ceramic brake pads, which offer a significant increase in thermal stability compared to standard ceramic pads, and silver zinc-plated rotors that provide maximum cooling and corrosion resistance. The bolt-on design ensures a straightforward installation into factory mounting points with no vehicle modifications required.

• Z26 Carbon-Fiber Ceramic Pads: Formulated for high-speed performance with 30% less dust than OE pads.
• Drilled & Slotted Rotors: Precision-drilled holes for maximum cooling and rounded slots to sweep away debris and gas.
• Corrosion Protection: Rotors are zinc-plated to prevent rust and maintain a clean appearance behind your wheels.
• Complete Hardware Kit: Includes stainless-steel installation hardware and high-temperature ceramic lubricant.
• Stainless Steel Shims: Enhanced heat dissipation and noise-free braking under demanding conditions.
• Manufacturer Part Number: K8758-26