Fits select 2018-2025 Jeep Wrangler and 2020-2025 Jeep Gladiator models.

Ensure consistent hydraulic pressure and responsive pedal feel with this DFC (Dynamic Friction Company) Front Right Brake Hose. Designed as a direct replacement for your factory equipment, this hose is engineered to withstand the high pressures of the braking system while resisting the thermal and environmental stress that causes OE hoses to swell, crack, or leak over time.

• Precision Fit: Designed to match the dimensions and fittings of the original hose for a straightforward installation.
• Pressure Tested: Built to meet or exceed performance standards for reliable hydraulic fluid transfer.
• Position: Front Right (Passenger Side).
• Manufacturer Part Number: 350-42117

Fits select 2018-2025 Jeep Gladiator and Wrangler models.

This DFC Front Left Brake Hose is engineered to restore factory-level hydraulic integrity and braking performance. Designed as a direct replacement for worn or damaged original equipment hoses, this component ensures consistent pressure delivery to the front left caliper, maintaining the reliable stopping power required for both daily driving and off-road environments.

• Position: Front Left
• Manufacturer Part Number: 350-42116
• Direct-fit design replaces original equipment hoses with no modification required
• Built to withstand high hydraulic pressures and environmental stress
• Precision-engineered fittings ensure a leak-free seal at the caliper and hard line

Fits 2007-2018 Jeep Wrangler and Wrangler JK across all trims including Rubicon, Sahara, Sport, and Unlimited models.

Ensure reliable hydraulic pressure and consistent stopping power with this DFC front left brake hose. Designed as a direct replacement for the original equipment, this hose is engineered to withstand the high-pressure environment of your Jeep's braking system while maintaining the necessary flexibility for suspension travel and steering. A compromised or aging brake hose can lead to fluid leaks or a spongy pedal; replacing it with this precision-manufactured component restores system integrity and vehicle safety.

• Manufacturer Part Number: 350-42026
• Position: Front Left (Driver Side)
• Engineered to meet or exceed OE specifications for fit and function
• Durable construction to resist heat, internal pressure, and environmental wear
• Direct-fit design for a straightforward installation on factory mounting points

Fits 2007-2018 Jeep Wrangler and Wrangler JK models including Rubicon, Sahara, Sport, and X trims.

This DFC Front Right Brake Hose is engineered to restore the integrity of your vehicle's hydraulic braking system. Over time, factory rubber hoses can expand, crack, or leak, leading to a spongy pedal feel and reduced stopping power. This direct-fit replacement is designed to meet or exceed original equipment standards, ensuring consistent brake fluid delivery and reliable pressure under heavy braking conditions.

• Direct replacement for a precise OE-style fitment
• Manufactured to withstand high hydraulic pressures and environmental stress
• Designed for the front passenger side (right) position
• Critical for maintaining safe stopping distances and pedal response
• Manufacturer Part Number: 350-42025

Fits select 2019-2022 Ram 1500 pickups including Big Horn, HFE, Laramie, Limited, Lone Star, Rebel, and Tradesman trims.

This DFC (Dynamic Friction Company) rear right brake hose is a precision-engineered direct replacement for your truck's original hydraulic line. Designed to restore firm pedal feel and reliable stopping power, this hose ensures consistent fluid pressure reaches the rear caliper. Each hose is constructed to resist internal expansion and external environmental wear, providing a long-lasting solution for your braking system.

• Direct-fit replacement for the OE rear right brake hose
• Restores hydraulic integrity and braking response
• Manufactured to high-quality standards for pressure resistance and durability
• Designed for seamless installation using factory mounting points
• Manufacturer Part Number: 350-40343

Fits 1973-1974 American Motors Javelin AMX and Base models.

This DFC (Dynamic Friction Company) front brake hose is an essential replacement for aged or brittle factory lines on your classic Javelin. As a critical component of your vehicle's hydraulic system, this hose is engineered to withstand high internal pressure and the constant movement of the front suspension, ensuring consistent braking performance and a reliable pedal feel.

• Precision-engineered to meet or exceed OE standards for pressure and durability
• Designed to restore firm brake pedal response by preventing fluid leaks and pressure drops
• Direct-fit application for the front brake system
• Manufacturer Part Number: 350-40032

Fits select 1961-1970 Buick, Chevrolet, Chrysler, Dodge, Oldsmobile, and Plymouth models including the Electra, Charger, Coronet, and 98. This DFC brake hose is engineered to restore hydraulic integrity and ensure consistent braking performance on classic applications.

Over time, original rubber hoses become brittle, swell internally, or develop external cracks that lead to pressure loss or a spongy pedal feel. This replacement hose is designed to meet or exceed OE specifications for fit and durability, providing a reliable link between the brake lines and wheel cylinders or calipers. It features high-quality fittings for a leak-free seal and reinforced construction to handle high hydraulic pressures.

• Direct-fit replacement for aged or damaged factory brake hoses
• Maintains consistent hydraulic pressure for improved stopping power
• Precision-machined fittings ensure a proper seal to the braking system
• Built to resist heat, ozone, and environmental weathering
• Manufacturer Part Number: 350-39067

Fits select 1957-1969 Chrysler, Dodge, and Plymouth models including the New Yorker, Newport, Imperial, Dart, Fury, and Valiant.

The DFC 350-39000 Brake Hose is a direct-replacement hydraulic line engineered to restore factory braking performance. Over decades of service, original rubber brake hoses often become brittle, swell internally, or develop external cracks, which can lead to a spongy pedal or catastrophic fluid loss. This hose is designed to withstand high hydraulic pressures and environmental exposure, ensuring consistent braking response in your classic Mopar.

• Manufactured to precise tolerances for a leak-free connection to factory hard lines
• High-quality rubber construction resists heat, ozone, and road debris
• Restores hydraulic integrity and pedal feel by replacing worn or expanded OE hoses
• Engineered for specific front or rear applications on 1950s and 60s Chrysler Corporation vehicles
• Manufacturer Part Number: 350-39000

Fits select 2015-2020 Land Rover Discovery Sport and 2018-2019 Range Rover Evoque.

The DFC 350-11021 Front Brake Hose is a precision-engineered hydraulic component designed to restore the safety and responsiveness of your vehicle's braking system. As a critical link between the brake line and the caliper, this hose is built to withstand high hydraulic pressures and the constant movement of the front suspension. Over time, original equipment hoses can suffer from internal swelling or external cracking; replacing them with this DFC unit ensures consistent pedal feel and prevents hazardous fluid leaks.

• Position: Front
• Direct-Fit Replacement: Replaces worn factory hoses with no modification required for installation.
• Durable Materials: Engineered to resist heat, ozone, and road contaminants for extended service life.
• Quality Tested: Designed to meet or exceed OE standards for pressure and flow characteristics.
• Manufacturer Part Number: 350-11021

Fits 2019-2023 Ram 1500 4x4 models including Rebel, Laramie, and Limited.

The Carli Front Braided Brake Line Kit for the 2019-2023 Ram 1500 is specifically engineered to address the brake line strain experienced when using extended travel coilovers. These lines provide the necessary length and durability for high-performance suspension systems, ensuring your braking system remains safe and functional throughout the full range of wheel travel.

Constructed with a triple-layer design, these lines feature a Teflon inner core for fluid compatibility, a Kevlar braid middle layer for structural integrity, and a stainless steel outer braid for superior protection against abrasion. This rigid construction eliminates the volumetric expansion found in factory rubber hoses, delivering a firm, consistent pedal feel and improved braking modulation.

• Fits 2019-2023 Ram 1500 4x4
• Pressure tested to 4,500 PSI
• Multi-layer construction: Teflon core, Kevlar middle, and Stainless Steel outer
• Eliminates spongy pedal feel by reducing line expansion
• Designed for trucks with extended travel suspension components
• Manufacturer Part Number: CS-RAM15BBL-19

Vehicle Fitment

Fits 2017-2026 Ford F-250 and F-350 Super Duty trucks equipped with 2.5-inch to 3.5-inch front lift systems.

Accommodate increased wheel travel and eliminate the risk of line failure with Carli Suspension Extended Front Braided Brake Lines. Specifically engineered for leveled or mildly lifted Super Duty trucks, these lines provide the necessary length to prevent binding or stretching during full suspension cycling. The triple-layer construction significantly reduces volumetric expansion compared to factory rubber hoses, resulting in a firmer, more responsive brake pedal.

• Multi-Layer Construction: Features a Teflon inner core, Kevlar braid middle layer, and a durable Stainless Steel outer jacket.
• High-Pressure Tested: Each line is pressure tested to 4,500 PSI to ensure integrity under extreme braking conditions.
• Lift Compatibility: Optimized for front lift heights between 2.5" and 3.5".
• Performance: Virtually zero expansion for consistent modulation and improved pedal feel.
• Part Number: CS-FORDBBL-LVL-17-F

Fits select 2023-2026 Ford F-250 and F-350 Super Duty 4x4 models equipped with 5.5-inch lift systems.

Carli Ford Extended Brake Line Kits are engineered to accommodate increased wheel travel while eliminating the risk of line tension or damage at full suspension droop. These lines are a critical upgrade for lifted Super Duty trucks, replacing factory hoses with a high-performance multi-layer construction that improves braking response by significantly reducing volumetric expansion.

Constructed with a Teflon inner core, a Kevlar braid middle layer, and a durable stainless steel outer jacket, these lines provide a consistently firm pedal feel under all conditions. Each line is pressure tested to 4,500 PSI to ensure long-term reliability and safety on and off the road.

• Manufacturer Part Number: CS-FORDBBL-55-23
• Specifically for 5.5-inch lift systems
• Triple-layer construction: Stainless steel outer, Kevlar braid, Teflon inner core
• Pressure tested to 4,500 PSI
• Maintains firm pedal feel by preventing line expansion

Vehicle Fitment

*Limited submodels fits through 2024.

Fits 2017-2026 Ford F-250 and F-350 Super Duty models (King Ranch, Lariat, Limited, Platinum, XL, XLT).

Carli Extended Brake Line Kits are engineered to accommodate the increased suspension travel of lifted 2017-2026 Ford Super Duty trucks. Designed specifically for 4.5-inch and 5.5-inch lift systems, these lines eliminate the risk of overextending or damaging factory lines during off-road articulation while providing a significant upgrade in braking response.

Constructed for maximum durability, these lines feature a three-layer design: a Teflon inner core for chemical resistance, a Kevlar braid for structural integrity, and a stainless steel outer wrap for abrasion protection. This rigid construction ensures virtually no volumetric expansion under pressure, resulting in a firm, consistent pedal feel that rubber lines cannot match.

• Specifically designed for 4.5" and 5.5" lift systems
• Pressure tested to 4500 PSI for maximum safety and reliability
• Multi-layer construction: Stainless steel outer, Kevlar braid middle, Teflon inner core
• Maintains firm brake pedal feel by preventing line expansion
• Replaces factory lines to allow for increased wheel travel
• Manufacturer Part Number: CS-FORDBBL-45-17

Fits 2011-2016 Ford F-250 and F-350 Super Duty (King Ranch, Lariat, Platinum, XL, and XLT).

Carli Extended Brake Line Kits are engineered to accommodate increased wheel travel on lifted trucks without the risk of overextending or damaging factory lines. Designed specifically for vehicles equipped with 2.5" to 4.5" of lift, these lines provide the necessary slack for full suspension articulation. This multi-layer construction eliminates the "spongy" feel of rubber OE lines by preventing volumetric expansion under high pressure, resulting in a significantly firmer and more consistent brake pedal feel.

• Manufacturer Part Number: CS-FORDBBL-11
• Designed for 2.5" to 4.5" lift systems (4.5" lifts require Carli brake line tabs CS-FBLT-05)
• Triple-layer construction: Stainless steel outer, Kevlar braid middle, and Teflon inner core
• Pressure tested to 4,500 PSI for maximum safety and reliability
• Provides virtually zero volumetric expansion for improved braking response

Fits 2005-2007 Ford F-250 and F-350 Super Duty trucks equipped with 2.5-inch to 4.5-inch lift systems.

Carli Extended Braided Brake Lines provide the necessary length to accommodate increased wheel travel, preventing line tension or damage at full suspension droop. Engineered for superior performance under pressure, these lines eliminate the volumetric expansion common in factory rubber hoses, resulting in a noticeably firmer and more responsive brake pedal feel.

Constructed with a heavy-duty tri-layer design, these lines feature a Teflon inner core for fluid compatibility, a Kevlar braid middle layer for structural reinforcement, and a stainless steel outer braid for maximum abrasion resistance. Note: 4.5-inch lift systems require the use of Carli brake line tabs (CS-FBLT-05) for proper routing.

• Triple-layered construction: Teflon inner, Kevlar middle, and Stainless Steel outer
• Pressure tested to 4,500 PSI for maximum safety and reliability
• Accommodates 2.5" to 4.5" lift heights
• Eliminates "spongy" pedal feel by preventing line expansion
• Direct replacement for OE brake lines
• Manufacturer Part Number: CS-FORDBBL-05

Fits 2000-2005 Ford Excursion Eddie Bauer, Limited, XLS, and XLT models.

The Carli Suspension Extended Brake Line kit is engineered to provide the necessary length for increased wheel travel, specifically designed to complement the Carli Excursion 4.5-inch suspension system. By replacing factory rubber hoses, these lines eliminate the spongy feel common in heavy SUVs, delivering a consistently firm and responsive brake pedal.

Constructed for maximum durability and performance, these lines feature a multi-layer design: a Teflon inner core for fluid compatibility, a Kevlar braid for structural integrity, and a protective stainless steel outer wrap. This construction ensures virtually no volumetric expansion under hard braking. Every line is individually pressure tested to 4,500 PSI to ensure reliability under extreme conditions.

• Materials: Teflon inner core, Kevlar braid middle, and Stainless Steel outer sleeve
• Testing: Individually pressure tested to 4,500 PSI
• Performance: Virtually zero volumetric expansion for improved pedal feel
• Travel: Extended length accommodates increased wheel travel from 4.5-inch lift systems
• MPN: CS-FEX-BBL

Upgrade your 2022+ Subaru WRX's braking system with AMS Performance Stainless Steel Brake Lines. Engineered to replace the factory rubber brake hoses, these lines are designed to eliminate the common issue of brake pedal flex under hard braking.

The inherent expansion of OEM rubber lines can lead to a soft, inconsistent pedal feel, especially during demanding driving conditions. These AMS Performance lines feature a robust stainless steel braided construction that resists expansion, ensuring a firmer, more consistent brake pedal response and improved modulation. This translates to more precise control and confidence when pushing your WRX to its limits.

• Reduces brake pedal flex for a firmer feel
• Enhances braking consistency and modulation
• Direct replacement for factory rubber brake hoses
• Constructed from durable stainless steel braiding
• Fitment: 2022+ Subaru WRX
• Manufacturer Part Number: AMS.50.01.0001-1

Fits 2008-2015 Mitsubishi Lancer Evolution X (GSR, MR, MR Touring, SE, and Final Edition).

Upgrade the braking response of your Evolution X with the AMS Performance Stainless Steel Brake Line Kit. Factory rubber lines are prone to expansion and volumetric swelling under high hydraulic pressure, which often results in a "spongy" or vague brake pedal feel. These stainless steel braided lines provide a rigid barrier against expansion, ensuring that hydraulic force is translated directly to the brake calipers for more immediate deceleration and improved pedal modulation.

• Direct replacement for factory rubber brake hoses
• Reduces brake pedal travel and eliminates expansion-related sponginess
• Provides consistent braking performance during high-heat track or spirited driving
• Stainless steel braided construction for superior durability and abrasion resistance
• Includes a complete set of four (4) lines for front and rear applications
• Manufacturer Part Number: AMS.04.01.0004-1