Designed specifically for drifting and performance applications where high initial bite is required, the Project Mu D1 SPEC Rear Brake Pads (PDR209) provide the aggressive friction needed to lock the rear wheels on demand. These pads are a direct-fit replacement for the factory rear brake pads on 2003-2008 Nissan 350Z models.

The D1 SPEC compound is engineered to maintain a high coefficient of friction even at lower initial temperatures, ensuring immediate response for handbrake entries and mid-corner adjustments. The metallic-based material is built to withstand the repeated thermal cycles common in competitive drift environments while protecting the rear rotors from excessive wear.

• Application-specific compound for superior rear brake bias and drift control
• High initial friction coefficient for immediate wheel-locking capability
• Direct replacement for OE rear brake pads
• Engineered for consistent performance under high thermal stress
• Manufacturer Part Number: PDR209

Fits 2017 Subaru STI equipped with factory 6-pot Brembo calipers.

Project Mu B-FORCE brake pads are developed for the enthusiast who demands reliable stopping power for both spirited street driving and light track use. These rear pads are engineered to provide a significant increase in initial bite and consistent friction coefficient across a wide temperature range. By balancing performance with rotor longevity, the B-FORCE compound offers a predictable pedal feel and improved fade resistance without the harshness of a dedicated racing pad.

• Compound: B-FORCE street/sport material
• Application: Rear brake system
• Designed for improved initial bite and heat management
• Direct replacement for OE-style pads on 6-pot Brembo equipped vehicles
• Manufacturer Part Number: PBR961

Project Mu B-Force rear brake pads (PBR916) are engineered for drivers who demand improved stopping power and initial bite over original equipment components. Developed for spirited street use and light performance applications, these pads provide a balanced friction coefficient for consistent braking performance while maintaining manageable noise and dust levels.

• Manufacturer Part Number: PBR916
• Position: Rear
• Enhanced thermal stability for consistent pedal feel
• Optimized for street-driven performance and reliability

Fits select 2010-2017 Subaru BRZ and Legacy, Scion FR-S, and Toyota 86.

Fits 2004-2014 Subaru Impreza WRX STI.

Project Mu B-FORCE rear brake pads are engineered to provide a balanced performance upgrade for enthusiasts who demand reliable stopping power during spirited street driving and light track use. These pads are designed to improve initial bite and offer better thermal stability than standard OE components, ensuring consistent pedal feel across a wider temperature range.

As a direct-fit replacement for vehicles equipped with factory Brembo calipers, the B-FORCE series minimizes fade while maintaining manageable noise and dust levels for daily drivability. This makes them an ideal choice for Subaru owners looking to enhance the braking dynamics of their WRX STI without sacrificing urban comfort.

• Manufacturer Part Number: PBR906
• Series: B-FORCE
• Position: Rear
• Compatibility: Fits factory Brembo calipers
• Applications: 2004-2014 Subaru Impreza WRX STI (including Limited and Special Edition)

Fits select 2002-2017 Subaru (Impreza/WRX, Forester, Legacy, BRZ, Baja), 2013-2016 Scion FR-S, and 2017 Toyota 86.

Project Mu B-FORCE D929 front brake pads are engineered as a high-performance street upgrade, offering improved initial bite and higher fade resistance compared to standard OE friction materials. These pads are designed for drivers who require reliable stopping power during spirited driving without sacrificing the low-noise and low-dust characteristics necessary for daily commuting. The B-FORCE compound provides a consistent pedal feel across a wide temperature range, making it an ideal choice for sport compacts and performance sedans.

• Manufacturer Part Number: PBF914
• Series: B-FORCE
• Position: Front
• Direct replacement for factory brake pads
• Optimized for street performance and spirited driving
• Reliable braking performance from cold starts to operating temperature

Fits 2003-2014 Mitsubishi Lancer Evolution and Evolution GSR.

Project Mu B-FORCE brake pads are engineered for the performance-minded enthusiast who demands improved stopping power for spirited street driving without sacrificing daily usability. These pads provide a significant upgrade over OE components, offering a balanced friction coefficient that delivers reliable initial bite and consistent pedal feel across a wide temperature range.

Designed to minimize rotor wear and brake dust, the B-FORCE series is an ideal solution for drivers looking to enhance the braking performance of their Lancer Evolution. Each set is manufactured to precise tolerances to ensure a direct fit into the factory front calipers.

• Series: B-FORCE
• Position: Front
• Manufacturer Part Number: PBF506
• Application: Performance Street
• Direct replacement for factory brake pads

Fits select 2000-2011 Acura RSX Type-S, Honda Civic Si, and Honda S2000.

Project Mu B-FORCE brake pads are engineered for drivers who demand more stopping power than standard OE pads without sacrificing daily street manners. These front pads provide a significant increase in initial bite and a consistent pedal feel through a wide range of temperatures. Developed for performance street use, the B-FORCE compound helps minimize fade during spirited driving while remaining relatively low in dust and noise compared to dedicated track pads.

• Manufacturer: Project Mu
• Series: B-FORCE
• Position: Front
• Manufacturer Part Number: PBF336
• Application: Performance Street
• Direct replacement for factory front brake pads

Vehicle Fitment:

• 2002-2006 Acura RSX Type-S
• 2002-2011 Honda Civic Si
• 2000-2009 Honda S2000 Base
• 2008-2009 Honda S2000 CR

Fits 1989-1996 Nissan 300ZX (Base, Turbo, and 2+2) with front 4-piston calipers.

Project Mu B-FORCE brake pads are engineered to provide a significant upgrade over factory compounds for spirited street driving and performance use. These pads deliver a high level of initial bite and consistent stopping power, ensuring reliable performance across a wide range of operating temperatures. The B-FORCE compound is specifically designed to minimize brake dust and noise while maintaining the thermal resistance required to prevent fade during demanding driving scenarios.

• Manufacturer Part Number: PBF236
• Position: Front
• Compound: B-FORCE performance street compound
• Installation: Direct replacement for OE front pads on 4-piston caliper models
• Performance: High initial friction with low dust and noise characteristics

Fits select 2008-2014 Nissan 370Z, Infiniti G35 Sport, G37 Sport, and FX50 models equipped with Akebono brake calipers. These Project Mu B-FORCE front brake pads (PBF210) are engineered to deliver reliable stopping power and improved initial bite for street performance and spirited driving.

Designed as a direct-fit replacement for factory brake pads, the B-FORCE compound minimizes brake dust and noise while maintaining consistent performance across a wide range of temperatures. Whether you are daily driving or navigating canyon roads, these pads provide the thermal stability needed to resist brake fade.

• Manufacturer Part Number: PBF210
• Designed for Akebono-equipped sport packages
• Optimized for low dust and reduced noise levels
• Improved initial bite and fade resistance over standard OE pads
• Complete set for the front axle

Fits 1986-1992 Toyota Supra Base and Turbo models.

Project Mu B-FORCE brake pads are engineered to provide a significant performance upgrade over factory components for street-driven vehicles. These front pads offer improved initial bite and reliable stopping power across a wide temperature range, making them an excellent choice for spirited daily driving and occasional performance use.

Developed with a focus on balanced performance, the B-FORCE series minimizes noise and vibration while delivering the fade resistance needed for demanding conditions. These pads are a direct replacement for your worn original equipment front pads, designed to install into the factory calipers without modification.

• Product Line: B-FORCE
• Position: Front
• Manufacturer Part Number: PBF187
• Compound: Performance Street
• Designed for improved initial bite and low noise
• Excellent fade resistance for spirited driving

Fits select 2010-2024 Toyota 4Runner and 2010-2023 Lexus GX460 models. Power Stop Z36 Truck & Tow front brake pads (Z36-976B) are engineered for vehicles that face the high demands of towing, hauling, and off-road driving. These pads feature a proprietary carbon-fiber ceramic compound that provides severe-duty stopping power while maintaining low dust levels verified through third-party on-vehicle testing.

Constructed with a powder-coated backing plate to resist corrosion and multi-layer stainless steel shims for superior heat dissipation, these pads ensure quiet, consistent performance. The pad surfaces are thermally scorched for a faster break-in period, and the positive mold technology ensures uniform wear across the friction surface.

• Carbon-fiber ceramic formulation for maximum stopping power under load.
• Chamfered and slotted design to minimize braking noise.
• Multi-layer stainless steel shims for noise-free performance and heat management.
• Powder-coated backing plate prevents rust and extends pad service life.
• Includes premium hardware kit and ceramic lubricant for a complete installation.
• Thermal scorched surface allows for rapid bed-in.
• Manufacturer Part Number: Z36-976B

Fits select 2000-2025 Toyota Tundra, Tacoma, Sequoia, 4Runner, FJ Cruiser, and Lexus GX470.

Engineered for vehicles that haul heavy loads, tow trailers, or tackle off-road terrain, the Power Stop Z36 Truck & Tow brake pads provide the severe-duty stopping power required for high-stress applications. These pads feature a proprietary carbon-fiber infused ceramic formula that maintains high friction levels at elevated temperatures, significantly reducing brake fade during long descents or heavy braking cycles.

Every Z36-976 pad set is manufactured using positive mold technology to ensure consistent wear and performance across the entire friction surface. To ensure quiet operation, the pads are chamfered and slotted according to OE specifications and fitted with multi-layer stainless steel shims for superior heat dissipation. The backing plates are finished in a durable powder coat to resist rust and corrosion in harsh environments.

• Carbon-fiber ceramic compound designed specifically for trucks, SUVs, and 4x4s
• Thermal scorched surface for rapid bed-in and immediate stopping performance
• Multi-layer stainless steel shims for noise-free braking and heat management
• Powder-coated backing plate provides long-term resistance to corrosion
• Includes premium 304 stainless steel hardware and high-temperature ceramic lubricant
• Low-dust formulation verified through third-party on-vehicle testing
• Manufacturer Part Number: Z36-976

Fits select 2003-2008 Dodge Ram 1500, 2500, and 3500 models.

Power Stop Z36 Truck & Tow brake pads are engineered for heavy-duty applications, providing the severe-duty stopping power required for towing, hauling, and off-road driving. These pads feature a specialized carbon-fiber infused ceramic formula that maintains high friction levels under extreme heat while significantly reducing brake dust compared to traditional semi-metallic pads.

Each set is designed as a direct bolt-on upgrade, featuring a powder-coated backing plate to resist corrosion and thermal scorched surfaces for a faster break-in period. To ensure a quiet and complete installation, these pads include premium stainless steel hardware and high-temperature ceramic lubricant.

• Carbon-fiber ceramic compound designed for severe-duty truck and SUV applications
• Multi-layer stainless steel shims for superior heat dissipation and noise-free braking
• Low-dust formulation verified through third-party on-vehicle testing
• Chamfered and slotted design for consistent performance and reduced noise
• Powder-coated backing plate resists rust and corrosion to extend pad life
• Thermal scorched pad surface for immediate break-in and bed-in
• Positive mold technology for uniform friction material density and wear
• Includes premium stainless steel hardware and ceramic brake lubricant
• Manufacturer Part Number: Z36-965

Fits select 1999-2013 Cadillac, Chevrolet, GMC, and Hummer models, including Silverado/Sierra 1500-3500, Suburban, Tahoe, and H2.

Power Stop Z36 Truck & Tow brake pads are engineered for drivers who demand severe-duty stopping power. Designed specifically for trucks and SUVs that tow, haul heavy loads, or tackle off-road terrain, the Z36-785 utilizes a proprietary carbon-fiber ceramic formula. This advanced compound maintains a high friction coefficient under extreme heat while significantly reducing brake dust and eliminating noise compared to standard OE pads.

Every Z36 brake pad set is manufactured using positive mold technology to ensure consistent friction density and even wear across the pad surface. The pads feature a thermal scorched surface to facilitate a faster break-in period, along with chamfered and slotted edges for quiet operation. To protect against the elements, each pad features a powder-coated backing plate that resists rust and corrosion over the life of the friction material.

• Carbon-fiber ceramic compound provides superior braking torque for towing and hauling.
• Multi-layer stainless steel shims offer enhanced heat dissipation and virtually noise-free performance.
• Low-dust formulation verified through independent 3rd party on-vehicle testing.
• Thermal scorched surface allows for a more effective and rapid bed-in process.
• Powder-coated backing plate provides long-term resistance to corrosion.
• Includes premium stainless steel hardware and high-temperature ceramic brake lubricant.
• Manufacturer Part Number: Z36-785

Fits select 1999-2020 Cadillac, Chevrolet, GMC, and Hummer vehicles, including Silverado/Sierra 2500/3500, Express/Savana 2500/3500, and DeVille/DTS.

Power Stop Z36 Truck & Tow brake pads are engineered for vehicles that face severe-duty demands, such as towing heavy trailers, hauling heavy loads, or navigating off-road terrain. The carbon-fiber reinforced ceramic compound provides the increased friction coefficient needed for high-stress stopping power without the excessive dust or noise common in traditional heavy-duty pads.

This kit replaces worn OE pads with a high-performance formula designed for longevity and consistency. Each set features a powder-coated backing plate to resist corrosion and thermal scorched surfaces for a faster break-in period. For a complete installation, Power Stop includes premium stainless steel hardware and high-temperature ceramic lubricant.

• Carbon-fiber infused ceramic formulation for severe-duty stopping power
• Multi-layer stainless steel shims dissipate heat for virtually noise-free braking
• Powder-coated backing plate resists rust and corrosion to extend pad life
• Positive mold technology ensures consistent density and performance
• Chamfered and slotted design for quiet operation
• Thermal scorched surface for immediate break-in
• Includes high-temperature ceramic brake lubricant and stainless steel hardware
• Manufacturer Part Number: Z36-784

Fits 1999-2005 Ford F-250 Super Duty, F-350 Super Duty, and Excursion.

Power Stop Z36 Truck & Tow brake pads are engineered for vehicles facing the high-demand stress of towing, heavy hauling, and off-road use. These rear brake pads (MPN: Z36-757) offer a significant upgrade over stock components, utilizing a carbon-fiber ceramic compound specifically formulated for severe-duty stopping power while maintaining low dust and quiet operation.

Manufactured using positive mold technology for consistent friction density and uniform wear, these pads are chamfered and slotted to ensure noise-free braking. The pad surfaces are thermal scorched for a faster break-in period, ensuring immediate performance. To protect against the elements, the backing plates are powder-coated to resist rust and corrosion, while multi-layer stainless steel shims help dissipate heat during heavy braking cycles.

• Carbon-fiber ceramic formulation designed for heavy-duty towing and hauling performance.
• Low-dust formula verified through third-party on-vehicle testing.
• Chamfered and slotted surfaces with multi-layer stainless steel shims for silent operation.
• Powder-coated backing plate resists corrosion to extend service life.
• Thermal scorched surface allows for a rapid bed-in process.
• Positive mold technology ensures consistent pedal feel and performance.

Includes premium stainless steel installation hardware and high-temperature ceramic brake lubricant.

Fits select 1993-2024 Toyota 4Runner, Sequoia, Land Cruiser, FJ Cruiser and Lexus GX460, GX470, and LX450.

Power Stop Z36 Truck & Tow brake pads are engineered for drivers who demand superior stopping power under extreme conditions. Whether you are towing a boat, hauling heavy loads, or navigating technical off-road trails, these carbon-fiber infused ceramic pads provide the increased friction coefficient needed to handle high thermal loads that cause stock brakes to fade.

Each pad set is manufactured using positive mold technology to ensure consistent friction density and wear across the entire pad surface. The backing plates are powder-coated to resist corrosion in harsh environments, while the surfaces are thermal scorched for a significantly faster break-in period. This kit includes premium stainless-steel hardware and multi-layer shims to eliminate noise and chatter during engagement.

• Manufacturer Part Number: Z36-606
• Carbon-fiber ceramic compound provides severe-duty stopping power with low dust
• Chamfered and slotted design ensures quiet, noise-free braking performance
• Multi-layer stainless-steel shims improve heat dissipation and dampen vibration
• Powder-coated backing plates resist rust for extended service life
• Includes premium stainless-steel installation hardware and ceramic brake lubricant
• Verified low-dust formulation via 3rd party on-vehicle testing

Fits select 1990-2006 Jeep Cherokee, Wrangler, Grand Cherokee, Comanche, Wagoneer, and Grand Wagoneer.

Engineered for vehicles that tow, haul, and tackle off-road terrain, the Power Stop Z36 Truck & Tow brake pad set offers a significant upgrade over factory components. These pads utilize a carbon-fiber reinforced ceramic compound designed to provide severe-duty stopping power while maintaining low dust and noise levels. Each pad is chamfered and slotted like the original equipment to ensure quiet operation, while the thermal scorched surface allows for a faster break-in period.

• Carbon-fiber ceramic formulation for increased friction and thermal stability under heavy loads
• Multi-layer stainless steel shims provide superior heat dissipation and virtually noise-free braking
• Powder-coated backing plate resists rust and corrosion to extend the service life of the pads
• Thermal scorched pad surfaces for quick bedding and immediate performance
• Positive mold technology ensures uniform density and consistent wear characteristics
• Includes premium stainless steel installation hardware and high-temp ceramic brake lubricant
• Manufacturer Part Number: Z36-477

Fits 2023-2024 Ford F-250 and F-350 Super Duty.

The Power Stop Z36 Truck & Tow brake pads are engineered as a high-performance upgrade for rear braking systems on heavy-duty trucks and SUVs. Specifically formulated for towing, hauling, and off-road use, these pads utilize a low-dust ceramic formula infused with carbon fiber to provide superior stopping power under severe-duty conditions. Each pad (MPN: Z36-2491) is chamfered and slotted for noise-free operation and features a thermal scorched surface for a fast, reliable break-in period.

• Carbon-fiber ceramic formulation provides severe-duty stopping power for towing and 4x4 applications.
• Low-dust formulation verified through 3rd party on-vehicle testing.
• Multi-layer stainless-steel shims facilitate heat dissipation and virtually noise-free braking.
• Powder-coated backing plate resists rust and corrosion to extend pad life.
• Positive mold technology ensures consistent wear and performance characteristics.
• Includes premium stainless-steel hardware and ceramic brake lubricant for a complete installation.

Fits 2023-2024 Ford F-250 and F-350 Super Duty models (King Ranch, Lariat, Limited, Platinum, XL, and XLT).

The Power Stop Z36 Truck & Tow brake pad series is engineered specifically for vehicles that demand severe-duty stopping power. Whether you are hauling heavy loads, towing trailers, or navigating mountain terrain, the carbon-fiber infused ceramic formula provides the extra thermal stability needed to prevent brake fade. These front pads utilize positive mold technology for consistent friction density and are thermal scorched at the factory to ensure a fast break-in period.

• Carbon-Fiber Ceramic Compound: Low-dust formula reinforced with carbon fiber for maximum braking torque and severe-duty performance.
• Noise-Free Operation: Multi-layer stainless steel shims and chamfered/slotted edges ensure virtually silent braking.
• Corrosion Resistance: A powder-coated backing plate protects against rust and corrosion to extend component life.
• Hardware Included: Ships with premium stainless steel installation hardware and high-temp ceramic brake lubricant.
• Third-Party Validated: Low-dust formulation confirmed through on-vehicle testing to keep wheels cleaner for longer.
• Manufacturer Part Number: Z36-2490

Fits select 2022-2025 Toyota Tundra, Sequoia, Tacoma, 4Runner, Land Cruiser, and Lexus LX600 models.

The Power Stop Z36 Truck & Tow brake pads are engineered as a high-performance upgrade for drivers who demand severe-duty stopping power. Designed specifically for trucks and SUVs that haul heavy loads, tow trailers, or tackle off-road terrain, these pads replace standard OE components with a reinforced carbon-fiber ceramic compound. This formula provides the high-friction bite needed for increased vehicle weights without the noise or excessive dust common in traditional semi-metallic pads.

Each Z36 kit includes premium stainless-steel hardware and ceramic lubricant to ensure a complete and reliable installation. To prevent corrosion in harsh environments, the backing plates are powder-coated, while the pad surfaces are thermal-scorched for a significantly faster break-in period.

• Manufacturer Part Number: Z36-2439
• Carbon-fiber ceramic compound provides severe-duty stopping power
• Low-dust formulation verified through 3rd party on-vehicle testing
• Multi-layer stainless-steel shims offer superior heat dissipation and quiet operation
• Chamfered and slotted design ensures noise-free braking performance
• Powder-coated backing plate resists rust and extends component life
• Positive mold technology ensures consistent friction density and wear
• Thermal scorched surface for immediate bedding and performance
• Includes premium stainless-steel hardware and ceramic brake lubricant

Fits select 2020-2025 Cadillac Escalade, Chevrolet Silverado 2500/3500 HD, Silverado EV, GMC Sierra 2500/3500 HD, Sierra EV, and Hummer EV.

The Power Stop Z36 Truck & Tow ceramic brake pads (Z36-2250) are engineered as a severe-duty upgrade for drivers who tow, haul, or navigate demanding off-road terrain. Unlike standard replacement pads, the Z36 series utilizes a carbon-fiber infused ceramic formula that increases the compound's strength and heat resistance. This provides the high-torque stopping power required for heavy loads and oversized tires while maintaining a low-dust, noise-free profile.

• Carbon-Fiber Ceramic Compound: Formulated for severe-duty applications to provide superior bite and thermal stability.
• Noise-Free Performance: Equipped with multi-layer stainless steel shims for maximum heat dissipation and quiet operation.
• Corrosion Resistance: A powder-coated backing plate protects against rust and extends the service life of the pads.
• Positive Mold Technology: Ensures consistent friction density and even wear for reliable pedal feel.
• Thermal Scorched: The pad surface is scorched during manufacturing for a faster break-in and immediate performance.
• Complete Installation Kit: Includes premium stainless steel hardware and high-temp ceramic brake lubricant.

Fits select 2019-2025 Ram 2500 and Ram 3500 (Big Horn, Laramie, Limited, Power Wagon, Rebel, SLT, and Tradesman).

Engineered to handle the extreme heat generated by heavy towing and hauling, the Power Stop Z36 Truck & Tow rear brake pads are a critical upgrade for heavy-duty Ram owners. These pads feature a proprietary carbon-fiber reinforced ceramic compound that provides high-torque stopping power without the noise or excessive dust typically found in heavy-duty metallic pads. Every pad is manufactured using positive mold technology for consistent density and uniform wear throughout its service life.

• Carbon-Fiber Ceramic Formula: Severe-duty compound designed specifically for the weight and heat of 4x4, towing, and hauling applications.
• Multi-Layer Shims: Premium stainless-steel shims provide superior heat insulation and virtually noise-free braking.
• Advanced Protection: The backing plate is powder-coated to resist rust and corrosion in harsh road conditions.
• Fast Break-In: Thermal scorched pad surfaces allow for a quicker bedding process and immediate stopping performance.
• Quiet Operation: Precision chamfers and slots ensure smooth, silent engagement under load.

Each Z36-2225 kit includes a complete set of rear brake pads, premium stainless-steel installation hardware, and high-temperature ceramic brake lubricant to ensure a professional-grade installation.

Fits select 2019-2025 Ram 3500 Big Horn, Laramie, Longhorn, Limited, Lone Star, SLT, Special Service, and Tradesman.

Designed specifically for high-stress applications, the Power Stop Z36 Truck & Tow rear brake pads (Z36-2224) are engineered for vehicles that regularly haul heavy loads, tow trailers, or navigate off-road terrain. These pads utilize a specialized carbon-fiber infused ceramic compound that provides significantly more stopping power than standard OE pads while maintaining a low-dust profile to keep your wheels cleaner.

• Carbon-Fiber Ceramic Formula: High-strength compound delivers severe-duty braking performance without sacrificing daily drivability.
• Low-Dust & Quiet: Third-party tested low-dust formulation combined with multi-layer stainless steel shims for noise-free operation and better heat dissipation.
• Corrosion Resistance: A powder-coated backing plate protects the pad against rust and environmental wear for an extended service life.
• Fast Break-In: Thermal scorched surfaces allow for a faster bedding process and immediate bite.
• Installation Ready: Includes premium stainless steel hardware and high-temp ceramic brake lubricant.
• Positive Mold Technology: Ensures consistent density and uniform wear throughout the life of the pad.

Fits select 2019-2025 Ram 2500 and 3500 heavy-duty trucks including Big Horn, Laramie, Limited, Power Wagon, Rebel, and Tradesman models.

Power Stop Z36 Truck & Tow ceramic brake pads (Z36-2223) are engineered for vehicles that face the extreme demands of heavy towing, hauling, and off-road use. By reinforcing a low-dust ceramic compound with carbon fibers, Power Stop has developed a severe-duty brake pad that maintains high-temperature stability and superior stopping power without the noise and dust typically associated with heavy-duty friction materials.

• Carbon-fiber ceramic formulation provides high-torque stopping power for Trucks, SUVs, and 4x4s.
• Multi-layer stainless-steel shims maximize heat dissipation for quiet, vibration-free braking.
• Powder-coated backing plate provides long-term resistance against rust and corrosion.
• Thermal scorched pad surface allows for a faster and more effective break-in period.
• Chamfered and slotted design mirrors OE specifications for reliable, noise-free performance.
• Positive mold technology ensures consistent friction density and uniform wear throughout the pad life.
• Includes premium stainless-steel hardware kit and high-temperature ceramic brake lubricant for a complete installation.

Manufacturer Part Number: Z36-2223

Fits select 2019-2025 Ram 1500 and 2022-2025 Jeep Wagoneer and Grand Wagoneer (including L models). Engineered as a high-performance upgrade for vehicles that tow, haul, or run oversized tires, the Power Stop Z36 Truck & Tow brake pads deliver the severe-duty stopping power necessary for demanding conditions. These pads utilize a proprietary carbon-fiber infused ceramic formula that provides excellent thermal stability and bite without the noise and high-dust issues common with traditional semi-metallic pads.

Each pad set is manufactured using positive mold technology to ensure consistent friction density and wear across the entire pad surface. The pads are chamfered and slotted to match the OE design for noise reduction and feature a thermal scorched surface to facilitate a faster break-in period. To ensure longevity in harsh environments, the backing plates are powder-coated to resist rust and corrosion.

• Carbon-fiber ceramic compound designed for severe-duty truck and SUV applications
• Low-dust formulation verified through independent third-party on-vehicle testing
• Multi-layer stainless steel shims provide superior heat dissipation and quiet operation
• Thermal scorched pad surface for immediate bedding and performance
• Includes premium stainless steel hardware kit and high-temp ceramic brake lubricant
• Manufacturer Part Number: Z36-2179

Fits select 2019-2025 Cadillac Escalade/ESV, Chevrolet Silverado 1500/Suburban/Tahoe/Colorado/Silverado EV, GMC Sierra 1500/Yukon/Canyon/Hummer EV, and Rivian R1S/R1T.

Power Stop Z36 Truck & Tow brake pads are engineered for drivers who demand superior stopping power under heavy loads. Whether you are towing a trailer, hauling gear, or running an oversized tire setup, the Z36-2174 rear pad set provides the severe-duty performance required for modern trucks and SUVs without the excessive noise or dust of traditional semi-metallic pads.

These pads utilize a carbon-fiber reinforced ceramic formula that maintains a high friction coefficient even at elevated temperatures. Each set includes premium stainless-steel hardware and ceramic lubricant to ensure a complete, noise-free installation. The powder-coated backing plate resists corrosion, extending the service life of the pads in harsh environments.

• Carbon-fiber ceramic compound designed for maximum braking torque and severe-duty performance
• Low-dust formulation validated through third-party on-vehicle testing
• Multi-layer stainless-steel shims insulate noise and improve heat dissipation
• Thermal scorched surface for faster bed-in and immediate pedal response
• Positive mold technology ensures consistent density and even wear across the pad
• Chamfered and slotted design provides smooth, quiet engagement
• Includes premium stainless-steel hardware kit and ceramic brake lubricant
• Manufacturer Part Number: Z36-2174

Fits select 2019-2024 Cadillac Escalade/ESV, Chevrolet Silverado 1500, Suburban, Tahoe, and GMC Sierra 1500, Yukon/XL.

Power Stop Z36 Truck & Tow brake pads are engineered for vehicles that face the demands of towing, hauling, and off-road driving. These front pads utilize a proprietary carbon-fiber reinforced ceramic compound, providing the increased brake torque and thermal stability required for severe-duty applications. Unlike traditional semi-metallic pads that produce excessive dust, the Z36 formula maintains a high coefficient of friction while keeping wheels clean and reducing rotor wear.

Every Z36 set is designed for a precise fit and quiet operation, featuring chamfered and slotted friction blocks that match original equipment specifications. To ensure a professional-grade installation, Power Stop includes a complete premium stainless-steel hardware kit and high-temperature ceramic lubricant.

• Carbon-fiber ceramic compound designed for severe-duty stopping power in trucks, SUVs, and 4x4s.
• Multi-layer stainless steel shims facilitate heat dissipation and ensure virtually noise-free braking.
• Thermal scorched pad surface allows for a faster break-in and immediate performance out of the box.
• Powder-coated backing plate resists rust and corrosion for extended service life.
• Positive mold technology provides consistent friction density and uniform wear patterns.
• Third-party validated low-dust formulation keeps wheels cleaner than OE alternatives.
• Includes all necessary stainless steel hardware and high-temp lubricant.
• Manufacturer Part Number: Z36-2173