Fits select 1990-1997 Ford Escort, Mazda Miata, Mazda Protege, and Mercury Tracer models. This EBC S10 Series Brake Pad and Rotor Kit (MPN S10KR1356) provides a matched performance upgrade for drivers seeking improved stopping power and heat management over stock OE components.

This comprehensive kit includes high-efficiency EBC pads manufactured with Aramid fiber. These pads are fully shimmed, slotted, and chamfered to reduce noise and vibration. They feature EBC's patented Brake-in coating, which ensures rapid pad seating immediately after installation. The kit is paired with sport-vented rotors cast from G3000 iron, featuring spot-drilled and wide aperture slots. These slots are designed to draw cool air into the braking surface while clearing dust and debris for consistent friction. All rotors are finished with a Geomet anti-rust coating to prevent corrosion on non-contact surfaces.

• Direct-fit installation requires no modifications to factory calipers
• Wide aperture slotted rotors maintain pad flatness and parallel wear
• Aramid fiber brake pads provide significant improvement in bite over standard OE pads
• G3000 sport rotors with Geomet anti-rust coating for longevity
• Kit includes pads, rotors, and high-performance caliper lubricant
• Manufacturer Part Number: S10KR1356

Fits select 1994-2005 Mazda Miata, Protege, Ford Escort, and Mercury Tracer.

The EBC Brakes S10 Brake Pad and Rotor Kit (S10KR1001) is a precision-matched performance upgrade designed to replace worn OE components with higher-efficiency materials. This kit pairs EBC high-friction Aramid fiber pads with G3000-spec wide-aperture slotted rotors to improve stopping power and thermal management during spirited driving. The rotors feature a Geomet anti-rust coating to maintain a clean appearance and resist corrosion in harsh environments.

• High-Efficiency Pads: Constructed with Aramid fiber, fully shimmed, slotted, and chamfered to minimize noise and maximize bite.
• Brake-In™ Coating: Features EBC's patented surface treatment for rapid pad-to-rotor seating immediately after installation.
• Sport Vented Rotors: G3000-grade iron with wide-aperture slots that draw in cool air and effectively expel dust, dirt, and gases.
• Direct Fit: Designed as a bolt-on replacement for factory hardware with no modifications required.
• Complete Kit: Includes a full set of pads, two sport rotors, and high-performance caliper lubricant.
• Warranty: Covered by a 10,000-mile no-hassle manufacturer warranty.

Fits select 2010-2018 Lexus GX460 and Toyota 4Runner models (including Limited, SR5, Trail, and TRD Pro).

Hawk Performance Talon Rotors leverage the manufacturer's proprietary DTC curved slot design to deliver consistent stopping power and enhanced thermal management. Cast from high-quality G3000 metallurgy, these rotors provide superior heat dissipation and structural integrity while significantly reducing harmonic resonance issues during braking. Each rotor is CNC programmed and balanced to ensure precise fitment and vibration-free operation.

To combat the elements, every Talon rotor is treated with a Magni™ coating barrier in ISO-certified facilities. This finish has been salt-spray tested per ISO-9227 to exceed 240 hours of corrosion resistance. The cross-drilled and precision-milled slots work together to expel debris and gases, maintaining a clean pad surface for improved wet braking and reliable performance under high-stress conditions.

• G3000 metallurgy automotive casting material for superior strength
• Proprietary DTC curved slot and cross-drilled design for thermal efficiency
• Magni™ coating exceeds ISO-9227 240-hour salt spray requirements
• Precision milled slots to maintain pad surface and expel debris
• CNC programmed and balanced for smooth performance
• Engineered to OE specifications and weights
• Manufacturer Part Number: HTC5045
• Includes: Set of two (2) front brake rotors

Fits select 1992-1995 Volkswagen Corrado SLC, Golf GTI, Jetta GLX, and Passat GLX (VR6 models).

EBC GD Series Sport rotors are engineered to provide superior cooling and degassing under heavy braking conditions. Unlike traditional cross-drilled rotors that are prone to stress cracking under high heat, these rotors feature blind-drilled dimples that offer effective degassing without compromising structural integrity. The wide-aperture slots actively pull cool air into the braking zone while expelling dust, dirt, and hot combustion gases from the pad contact area.

Precision-cast from OE-spec G3000 grey iron, these rotors are finished with a gold anodized coating to resist corrosion on the non-contact surfaces. The GD578 rotors are an ideal solution for performance-oriented street driving or applications where brake fade must be minimized during spirited use or under heavy load.

• Slotted and dimpled design significantly reduces operating temperatures and prevents brake fade
• Cast from high-quality G3000 grey iron for long-term durability and thermal stability
• Gold anodized finish provides protection against rust and corrosion
• Slots remove dirt, dust, and debris from the braking zone for consistent pad bite
• Precision tested for runout and structural integrity
• Direct-fit replacement for factory front rotors
• Manufacturer Part Number: GD578

Fits select 2021-2025 Mercedes-Benz GLE53 AMG, GLE63 AMG S, GLS63 AMG, and S63 AMG E Performance.

The DFC GeoSPEC Drilled and Slotted Brake Rotor is engineered for enthusiasts who demand both aesthetics and high-performance braking. These rotors feature a specialized GeoSPEC coating that provides superior corrosion resistance compared to traditional zinc plating or paint, keeping your hub and vanes looking clean while ensuring long-term durability. The combination of precision drilling for heat dissipation and slotting for gas and debris evacuation ensures consistent friction and improved bite under demanding driving conditions.

• Premium Castings: Manufactured using G3000/G11H18 iron for maximum strength, stability, and thermal management.
• Ready to Install: Precision-cleaned and ready for installation immediately out of the box with no degreasing required, saving time and shop costs.
• Smooth Operation: 100% precision cut and mill-balanced to ensure zero vibration and smooth stopping power at any speed.
• Non-Directional Finish: Promotes faster pad break-in and more uniform friction levels.
• Exact Fit: Designed to meet the same form, fit, and functional requirements as the original equipment rotor.
• Part Number: 634-63191

Fits 2013-2018 Mercedes-Benz G63 AMG and G65 AMG. This DFC GeoSPEC brake rotor is engineered to provide superior braking performance while maintaining strict original equipment standards for fit and function.

Constructed from premium G3000/G11H18 iron castings, this rear rotor features a combined drilled and slotted pattern to maximize heat dissipation and reduce brake fade during spirited driving. The GeoSPEC coating provides significantly better corrosion protection than conventional zinc or paint finishes, ensuring the rotor remains clean and functional even in harsh environments. Each rotor is 100% precision cut and mill-balanced to eliminate vibration at any speed, while the non-directional finish allows for a faster break-in period and smoother stops.

• Premium G3000/G11H18 iron castings for maximum strength and stability
• GeoSPEC coating offers superior resistance to rust and corrosion
• Drilled and slotted design improves cooling and gas venting
• Mill-balanced to ensure zero vibration and smooth operation
• Ready to install: no pre-degreasing or cleaning required
• Non-directional finish for consistent performance and quick bedding
• Manufacturer Part Number: 634-63148

Fits select 2012-2019 Mercedes-Benz GL63 AMG, GLE63 AMG, GLE63 AMG S, GLS63 AMG, and ML63 AMG models.

DFC GeoSPEC Drilled and Slotted Brake Rotors are engineered for drivers seeking improved thermal management and consistent braking performance. These rear rotors feature a drilled and slotted design that effectively vents heat and gases, reducing brake fade during aggressive driving or heavy vehicle loads. Each rotor is cast from premium G3000/G11H18 iron for high tensile strength and long-term stability.

Every GeoSPEC rotor comes ready to install with no additional degreasing required, saving significant time during the installation process. The specialized GeoSPEC coating provides superior corrosion protection over conventional zinc or painted finishes, maintaining a clean look behind your wheels. To ensure a smooth, vibration-free ride, all rotors are 100% precision-cut and mill-balanced to strict tolerances.

• Manufacturer Part Number: 634-63141
• Material: Premium G3000/G11H18 iron castings
• Surface Finish: Drilled and Slotted with GeoSPEC anti-corrosion coating
• Direct OE replacement for proper form, fit, and function
• Non-directional finish for faster pad break-in and quieter operation
• Precision mill-balanced to eliminate high-speed vibration

Fits 2013-2018 Mercedes-Benz G63 AMG and G65 AMG.

Upgrade your G-Class braking performance with the DFC Rear Drilled and Slotted Brake Rotor. Engineered specifically for high-performance Mercedes-Benz SUVs, these rotors are cast from premium G3000/G11H18 iron to ensure maximum structural integrity and thermal stability under the heavy braking loads typical of the AMG G-Wagon. The cross-drilled and slotted surface helps vent gases and dissipate heat, maintaining consistent stopping power even during spirited driving.

• Precision Engineering: 100% mill-balanced to ensure smooth rotation and zero vibration at any speed, with CNC-machined tolerances for exact fitment.
• Thermal Management: Features an Original Equipment (OE) vane configuration to maximize airflow and prevent brake fade.
• Consistent Performance: The non-directional finish promotes faster pad break-in and ensures smoother, quieter stops.
• Direct Replacement: Designed to meet exact OEM form and function; ships ready to install with no vehicle modifications required.

Technical Specifications:

• Manufacturer Part Number: 630-63148
• Placement: Rear
• Material: G3000/G11H18 Iron Casting
• Finish: Drilled and Slotted

Fits 2013-2018 Mercedes-Benz G63 AMG and G65 AMG.

Upgrade your G-Wagon's braking system with the DFC Drilled and Slotted Brake Rotor. Engineered for the high-performance demands of the AMG G-Class, these rotors are cast from premium G3000/G11H18 iron to provide exceptional strength and thermal stability under heavy use. The drilled and slotted surface design effectively evacuates heat, moisture, and brake dust, ensuring consistent friction and reduced fade.

• Precision CNC-machined for exact fitment and tight tolerances
• G3000/G11H18 iron castings for long-term durability and resistance to warping
• 100% mill-balanced to eliminate vibration and ensure smooth engagement
• Original Equipment (OE) vane configuration maintains factory cooling efficiency
• Non-directional finish facilitates a faster, smoother break-in process
• Ready to install with no modifications required
• Manufacturer Part Number: 630-63147

Fits 1992-2000 Dodge Viper models including ACR, Base, GT2, GTS, and R/T-10.

The EBC Brakes S5 kit is a high-performance brake upgrade designed for high-horsepower street cars and spirited driving. This comprehensive kit pairs EBC flagship Yellowstuff high-friction pads with GD series wide-aperture slotted and spot-drilled rotors to deliver maximum thermal management and consistent stopping power. The combination is engineered to significantly reduce brake fade while providing a high-friction GG rating for immediate bite.

• Yellowstuff High Friction Pads: GG rated for maximum brake effect; fully shimmed, chamfered, and slotted to reduce noise.
• Brake-In Coating: Features EBC's patented surface coating for accelerated pad seating and bed-in.
• GD Series Sport Rotors: Manufactured from G3000 cast iron with wide-aperture slots and spot drilling to vent gases, dust, and debris.
• Geomet Coating: Provides a durable anti-rust finish on the rotor hubs and vanes for long-term corrosion resistance.
• Direct Fit: Bolts directly to factory mounting points with no modifications required over the stock setup.
• Complete Kit: Includes front and rear pads, rotors, and caliper lubricant for a full installation.
• MPN: S5KR1404
• Warranty: 10,000-mile manufacturer no-hassle warranty.

Fits 2015-2022 Ford Mustang models (Front Left).

The Power Stop Evolution Drilled and Slotted rotor (AR85159XL) is an essential upgrade for drivers looking to improve braking performance and thermal management. This rotor is engineered as a direct bolt-on replacement for the factory unit, featuring precision-drilled holes that significantly reduce operating temperatures during spirited driving. The rounded slots serve to sweep away gas, moisture, and brake dust, ensuring a clean contact patch between the pad and rotor surface to minimize brake fade.

• Direct fit replacement for original equipment front left rotors
• Precision-drilled holes for maximum cooling and heat dissipation
• Rounded slots maintain a clean pad surface and improve wet-weather performance
• Silver zinc dichromate plating helps prevent rust and corrosion
• Part Number: AR85159XL

Fits 2015-2016 Mini Cooper S.

The EBC Brakes S6 Brake Pad and Rotor Kit (S6KF1382) is a comprehensive performance upgrade designed for the "weekend warrior" who demands reliable stopping power on both the street and the track. By bundling these high-performance components, this kit offers a 15% savings over purchasing parts individually. The kit features high-friction pads that provide excellent cold bite for safe daily driving while maintaining the thermal stability required to withstand the high temperatures of short track sessions.

The included G3000 slotted rotors are engineered with wide apertures to effectively vent brake gases, dust, and debris, ensuring consistent pad contact. Every rotor is finished with a Geomet anti-rust coating to prevent corrosion and maintain a clean look behind your wheels. This direct-fit kit replaces your factory hardware with no modifications necessary.

• Direct-fit performance upgrade for 2015-2016 Mini Cooper S
• High-friction pads optimized for cold bite and high-heat track cycles
• Wide-aperture G3000 slotted rotors for superior degassing and cooling
• Geomet anti-rust coating for long-lasting corrosion resistance
• Includes premium caliper lubricant
• Manufacturer Part Number: S6KF1382

Note: Pads must be properly pre-bedded on the street before track use. For track applications, monitor pad wear every 10 laps to ensure safe operation. No warranty is provided for race use.

Fits select 2019-2025 Ram 2500 and 3500 trucks.

The EBC Brakes S3 Brake Pad and Rotor Kit (S3KR1244) is an engineered performance upgrade designed for heavy-duty applications, including light towing and moderately modified trucks. This kit combines high-efficiency EBC brake pads with performance rotors to deliver superior heat management and stopping power compared to OE components.

The included G3000-grade rotors feature a dimpled and slotted design that effectively vents heat and gasses, preventing surface stress cracks during heavy braking. Each rotor is fully balanced and run-out tested to ensure vibration-free performance. For long-term durability, the rotors are finished with a thermic Geomet anti-rust coating that protects the hub and veins from corrosion.

The EBC pads are treated with a patented Brake-in surface coating to accelerate the bedding process, providing reliable friction immediately after installation. This direct-replacement kit is designed to bolt into factory mounting points without modification.

• Manufacturer Part Number: S3KR1244
• Rotor Material: G3000 performance cast iron
• Rotor Design: Dimpled and slotted for thermal efficiency
• Coating: Geomet thermic anti-rust finish
• Application: Optimized for truck/SUV upgrades and light towing

Fits select 2003-2018 Toyota 4Runner, Tacoma, FJ Cruiser, and Lexus GX470 with 6-lug wheels and 4-piston calipers.

The DBA Street Series X (DBA2716X) front rotor is engineered for daily drivers seeking improved thermal management and a performance aesthetic. Featuring DBA’s patented Kangaroo Paw ventilation system, these rotors use a series of 144 diamond and teardrop-shaped pillars to increase surface area and cooling efficiency compared to traditional straight-vane designs.

The non-directional drilled and slotted pattern effectively clears brake dust and gases, ensuring consistent pad contact and reduced brake fade during repeated stops. Finished with a corrosion-resistant coating on the hub and vents, these rotors provide a clean look behind your wheels while maintaining structural integrity under high-heat conditions.

• Direct Replacement: Bolts to factory mounting points with no modifications required.
• Kangaroo Paw Ventilation: Enhanced heat dissipation and increased rotor strength.
• Drilled & Slotted: Improves initial bite and helps evacuate moisture, gases, and debris.
• Application Specific: Designed for 6-lug Toyota/Lexus truck and SUV platforms equipped with 4-piston calipers.
• Manufacturer Part Number: DBA2716X

Fits select 2010-2018 Lexus GX460, Toyota 4Runner, and Toyota FJ Cruiser.

Engineered to improve thermal efficiency and wet braking performance, the Hawk Performance Talon series combines high-performance DTC curved slots with precision-drilled patterns. These rear rotors are built to strict OE specifications and weights, ensuring a direct bolt-on fitment without the need for modifications to your vehicle's factory braking system. The drilled and slotted design effectively expels debris and maintains a clean pad surface for consistent friction.

Constructed from superior G3000 metallurgy, each rotor is CNC-programmed for balance and finished with a Magni™ coating barrier. This specialized coating has been salt-spray tested per ISO-9227, exceeding the 240-hour requirement to provide exceptional corrosion resistance in harsh environments. The precision-milled slots also help reduce harmonic resonance issues, leading to quieter, smoother operation.

• Direct OE replacement fitment
• G3000 metallurgy casting material
• Cross-drilled and slotted to optimize heat dissipation
• Magni™ coating exceeds ISO-9227 salt spray standards (>240 hours)
• CNC-programmed for precise balance
• Precision-milled slots help maintain pad surface integrity
• Manufacturer Part Number: HTC5046

Fits select 2007-2022 Toyota Tundra, Sequoia, Land Cruiser, and Lexus LX570. This EBC Brakes S8 series kit is a comprehensive braking upgrade designed for enthusiasts who require a durable track-day solution that remains safe for street driving. By bundling components into this S8KF1089 kit, you receive high-performance hardware while saving 15% over the cost of purchasing pads and rotors separately.

The included Orange Grade pads offer a longer service life than traditional track pads. Once properly bedded, they provide the necessary bite for track events while maintaining the civil characteristics required for the drive home. The kit is paired with EBC Wide Aperture G3000 slotted rotors, which are engineered to deglaze the pad surface and vent gases efficiently under heavy load. Every rotor is finished with a Geomet anti-rust coating to maintain a clean appearance and prevent corrosion on non-contact surfaces.

• Direct-fit replacement with no modifications required to factory calipers.
• Orange Grade pads are designed for heavy track use with street-legal versatility.
• Wide-aperture slotted rotors manufactured from G3000-grade cast iron.
• Geomet coating provides superior resistance to corrosion and salt.
• Includes pads, rotors, and high-temp caliper lubricant.
• Manufacturer Part Number: S8KF1089

Fits 2016-2023 Honda Civic models, including EX, LX, Si, and Type R.

The EBC Brakes S10 Brake Pad and Rotor Kit is engineered for drivers seeking a significant performance upgrade over original equipment. This kit combines high-friction Greenstuff 2000 series pads with slotted G3000 Sport Rotors to provide improved stopping power and heat management for spirited driving and modern compacts.

• Greenstuff 2000 Pads: High-friction compound designed for sport sedans and prestige cars, offering improved stopping power with lower dust emission.
• EBC Brake-In Coating: Specialized surface coating accelerates the pad bedding process for immediate braking efficiency.
• G3000 Sport Rotors: Features wide-aperture slots that vent gases, heat, and debris to maintain consistent pad contact.
• Geomet Anti-Rust Coating: Protects the rotor surfaces from corrosion, maintaining performance and appearance over time.
• MPN: S10KR1455

Fits 2016-2026 Honda Civic models including EX, LX, Si, Sport, and Type R. This EBC Brakes S10 Brake Pad and Rotor Kit is a direct-fit upgrade designed to enhance stopping power and thermal management over factory components. Engineered for spirited street driving and daily use, this matched set (MPN S10KR1404) provides a significant improvement in braking performance without requiring modifications to your stock setup.

The kit includes high-efficiency pads manufactured with Aramid fiber, which are fully shimmed, slotted, and chamfered for quiet operation. These pads feature EBC's patented Brake-in coating to ensure rapid pad seating immediately after installation. They are paired with G3000 sport vented rotors that utilize spot drilling and wide aperture slots. The slot design draws cool air into the braking zone while effectively removing dust and debris for a cleaner friction surface and consistent pedal feel.

• Direct-fit replacement with no vehicle modifications required
• High-efficiency Aramid fiber pads with Brake-in coating for fast seating
• G3000 sport vented rotors with wide aperture slots and spot drilling
• Geomet anti-rust coating for long-lasting corrosion resistance
• Includes high-quality caliper lube
• Manufacturer Part Number: S10KR1404
• 10,000-mile no-hassle manufacturer warranty

Fits select 2019-2026 Ram 1500 and 2022-2023 Jeep Wagoneer and Grand Wagoneer models. This EBC S8 series kit is a comprehensive track-ready upgrade for heavy-duty trucks and SUVs, engineered to deliver increased stopping power and thermal management over OEM setups.

The kit features EBC Orange Grade pads, which utilize the Nucap NRS hook system on the backing plates to achieve five times the bond strength of conventional pads. Deep grooves within the friction material facilitate venting and debris removal, ensuring consistent performance during repeated hard braking. These are paired with GD-series slotted and dimpled rotors cast from G3000 iron. The wide-aperture slots are designed to pull cool air across the pad surface while expelling gasses, dust, and carbon deposits. Unlike through-drilled rotors, the blind-drilled dimples provide degassing benefits without compromising structural integrity or risking stress cracks.

• Manufacturer Part Number: S8KR1173
• Rotor Material: G3000 iron, rated up to 800-900°C
• Rotor Finish: Thermic black corrosion-resistant coating
• Pad Material: Orange Grade high-performance compound
• Pad Features: Nucap NRS hook system for mechanical bond strength
• Direct fit installation; replaces factory brake components without modification
• Includes a complete set of pads and a pair of rotors

Fits select 2007-2022 Toyota Sequoia, Tundra, Land Cruiser, and Lexus LX570. This EBC Brakes S5 Sport Upgrade Kit is a complete front-end solution designed for trucks, SUVs, and high-horsepower street vehicles that require superior thermal management and stopping power.

The kit features EBC Yellowstuff high-friction pads, which carry a GG friction rating for maximum initial bite and fade resistance. These pads come fully shimmed, chamfered, and slotted with a patented EBC Brake-In coating to ensure rapid pad seating. Paired with these are the GD series wide-aperture rotors, cast from G3000 iron. The dimpled and slotted design facilitates the removal of dust, gas, and debris while maintaining maximum cooling efficiency to prevent rotor warping under heavy loads.

• Includes GG-rated Yellowstuff high-friction pads for maximum braking effect
• Wide-aperture G3000 sport rotors provide superior cooling and debris removal
• Geomet anti-rust coating on rotor surfaces ensures long-term corrosion resistance
• Direct fitment replaces factory components with no modifications required
• Includes high-quality caliper lubricant and hardware where applicable
• Manufacturer Part Number: S5KF1460
• Warranty: 10,000 Mile No-Hassle Manufacturer Warranty

Fits 2011-2016 Honda CR-Z (Base, EX, EX-L, and LX models).

The EBC Brakes S10 Brake Pad and Rotor Kit (S10KF1419) is a comprehensive upgrade designed to provide a significant improvement in stopping power over original equipment. This kit combines high-efficiency Aramid fiber pads with wide-aperture slotted sport rotors to deliver cooler operating temperatures and consistent performance during spirited driving. By bundling these components, you save 15% over the cost of purchasing pads and rotors separately.

The included brake pads are fully shimmed, slotted, and chamfered to minimize noise and vibration. They feature EBC’s patented Brake-In coating, which facilitates rapid pad seating and optimal performance immediately after installation. The G3000 sport rotors are vented and wide-aperture slotted to draw cool air into the braking area while effectively clearing dust, dirt, and debris. Each rotor is finished with a Geomet anti-rust coating to maintain a clean appearance and resist corrosion.

• Direct-fit replacement with no modifications required to the stock setup
• High-efficiency Aramid fiber pads for superior friction and thermal stability
• Wide-aperture slotted G3000 sport rotors for improved cooling and debris removal
• Geomet anti-rust coating for long-lasting corrosion resistance
• Patented Brake-In coating ensures fast pad-to-rotor bedding
• Includes caliper lubricant and necessary hardware
• Manufacturer Part Number: S10KF1419
• 10,000-mile no-hassle manufacturer warranty

Fits select 2008-2022 Toyota Corolla, Matrix, Scion xD, and Pontiac Vibe.

The EBC S6 Series Brake Pad and Rotor Kit (S6KF1394) is an engineered performance solution for "weekend warriors" who demand high-friction braking on the track without sacrificing street driveability. This direct-fit kit provides a 15% cost saving over purchasing components individually and includes ultra-high-friction pads, wide-aperture slotted rotors, and high-performance caliper lubricant.

The high-friction pads are specifically formulated to provide an aggressive bite from cold while maintaining thermal stability under the intense heat of short-track sessions. They are paired with G3000 slotted rotors featuring a wide-aperture design that actively clears gas, dust, and debris for consistent pedal feel. Each rotor is finished with a Geomet anti-rust coating to ensure long-lasting corrosion resistance and a clean aesthetic behind your wheels.

• Kit includes ultra-high friction pads and G3000 wide-aperture slotted rotors
• Geomet anti-rust coating for superior corrosion protection
• Direct-fit design replaces factory components with no modifications required
• High heat resistance for track use with excellent cold bite for street safety
• Manufacturer Part Number: S6KF1394

Vehicle Fitment

Fits select 2007-2020 Cadillac Escalade, Chevrolet Silverado, Tahoe, Suburban, and GMC Sierra and Yukon models.

The DBA Street Series X Gold (DBA2011X) provides a significant performance and aesthetic upgrade over standard factory rotors. Designed for daily drivers and utility vehicles, this rear brake rotor features a premium non-directional cross-drilled and slotted pattern. This design helps dissipate heat, vent gases, and clear debris from the pad surface to ensure consistent stopping power and reduced brake fade during heavy use.

To ensure long-lasting durability and a clean appearance, the Street Series X Gold rotors feature an attractive gold finish on the rotor hub to resist corrosion. As a direct-fit replacement, these rotors bolt onto factory mounting points without the need for additional modifications.

• Manufacturer Part Number: DBA2011X
• Series: Street Series X Gold
• Rotor Design: Non-directional cross-drilled and slotted
• Hub Finish: Gold painted protection to resist rust
• Position: Rear
• Fitment: Direct OE replacement for various 2007-2020 GM 1500-series trucks and SUVs

Fits select 2006-2009 Infiniti FX35, 2006-2008 Infiniti FX45, and 2011-2014 Nissan Murano models.

The EBC Brakes S6 Series kit is engineered for the "weekend warrior," providing a significant braking upgrade for vehicles that see both daily commuting and occasional light track or spirited driving. This comprehensive kit (MPN: S6KR1138) pairs high-friction pads with G3000 wide-aperture slotted rotors to manage the intense heat and mechanical stress of performance driving without sacrificing street-legal cold bite.

Each kit includes EBC high-friction pads designed to remain effective across a wide temperature range. These pads are pre-bedded for faster break-in and offer a firm pedal feel. The included G3000 rotors feature a slotted design to vent gasses, dust, and debris, ensuring consistent pad contact. For long-term durability, the rotors are finished with a Geomet anti-rust coating to prevent corrosion on non-contact surfaces.

• Direct Fit: Replaces factory components with no modifications required to the stock caliper or spindle.
• High-Friction Pads: Engineered for street safety and short-track heat resistance; performance should be monitored during track sessions.
• G3000 Slotted Rotors: Wide-aperture slots help maintain cooler operating temperatures and clear debris.
• Corrosion Resistance: Full Geomet coating prevents rust and maintains a clean appearance behind the wheels.
• Complete Kit: Includes performance brake pads, slotted rotors, and high-temperature caliper lubricant.
• Part Number: S6KR1138

Fits select 2005-2017 Nissan 350Z and Infiniti G35, M35, M45, and QX50 models. This EBC Brakes S6 kit is engineered for the enthusiast who demands reliable street performance with the capacity for short-duration track use. By combining high-friction pads with wide-aperture slotted rotors, this kit addresses the heat management and bite required for aggressive driving without needing a full big-brake conversion.

The included brake pads are designed to provide immediate bite from cold while maintaining stability at the elevated temperatures encountered during spirited canyon runs or track sessions. The rotors are cast from G3000 metallurgy and feature wide-aperture slots that help degas the braking surface and clear debris. Every rotor is finished with a Geomet anti-rust coating to maintain a clean appearance and prevent corrosion on non-contact surfaces.

• Manufacturer Part Number: S6KR1084
• Rotor Material: G3000 Slotted Grey Iron
• Rotor Finish: Geomet Anti-Rust Coating
• Pad Type: Ultra High Friction Track Day & Street Pad
• Design: Direct fit, bolt-on replacement for factory hardware
• Kit Includes: Slotted brake rotors, brake pads, and high-temp caliper lubricant

Note: These pads are pre-bedded for immediate use; however, always monitor wear every 10 laps during track sessions as high-heat applications will accelerate pad consumption.

Fits 2008-2013 BMW 128i Base.

The EBC Brakes S5 Brake Pad and Rotor Kit (S5KR1324) is a high-performance sport upgrade designed for fast street use and heavy braking demands. This comprehensive kit bundles EBC Yellowstuff high-friction pads with GD Series wide-aperture dimpled and slotted rotors to provide maximum stopping power and thermal management. By combining these components into a single kit, you ensure perfectly matched friction surfaces while saving on total component costs.

The included Yellowstuff pads are GG-rated for high friction and feature a patented Brake-In coating for rapid pad seating. To ensure quiet operation and a professional fit, the pads are fully shimmed, chamfered, and slotted. They are paired with GD Series sport rotors, cast from G3000 iron and finished with a Geomet anti-rust coating. The wide-aperture slots and spot-drilled dimples effectively clear dust, gas, and debris while pulling cool air across the friction surface to prevent brake fade during spirited driving.

• Direct fit replacement for factory braking systems with no modifications required
• Yellowstuff high-friction pads for maximum street performance and high-heat stability
• GD Series G3000 alloy rotors featuring dimpled and slotted surfaces for superior cooling
• Geomet anti-rust coating protects non-friction surfaces from corrosion
• Includes high-quality caliper lubricant and necessary hardware
• Manufacturer Part Number: S5KR1324
• 10,000-mile no-hassle warranty

Fits select 2003-2015 Audi Q7, Porsche Cayenne, and Volkswagen Touareg.

Hawk Performance Talon Rotors leverage a unique proprietary DTC curved slot design combined with precision cross-drilling to optimize thermal efficiency and maintain a clean pad surface. These rotors are engineered to OE weights and production processes, ensuring a bolt-on fitment that replaces worn factory components without modification. Built using superior G3000 metallurgy, each rotor is CNC programmed and balanced to minimize harmonic resonance and vibration during heavy braking.

To ensure long-term durability in harsh environments, each rotor features a Magni™ coating barrier that exceeds the ISO-9227 salt spray requirement of 240 hours. This protective layer helps prevent corrosion while the machined finish and milled slots ensure consistent performance in both wet and dry conditions.

• Manufacturer Part Number: HKC4496.502B
• Material: G3000 automotive casting metallurgy for superior strength and heat dissipation
• Finish: Magni coating barrier salt-spray tested to exceed ISO-9227 (240+ hrs)
• Design: Cross-drilled and milled slots for debris evacuation and improved wet braking
• Precision balanced via CNC programming to reduce noise and harmonic resonance
• Coated in ISO certified North American facilities

Fits 2007-2018 Jeep Wrangler and Wrangler JK models including Rubicon, Sahara, Sport, and X trims.

Power Stop Evolution Drilled and Slotted Rotors (AR8780XPR) provide a precision-engineered, bolt-on performance upgrade for your Jeep's braking system. These front rotors are designed to manage the high thermal loads of off-roading and heavy use through precision cross-drilling, which facilitates maximum cooling. The integrated rounded slots sweep away gas, dust, and moisture, ensuring a clean friction contact patch for consistent stopping power under extreme conditions.

• Precision cross-drilled for optimal heat dissipation and cooling performance
• Rounded slots effectively remove debris and prevent pad glazing
• Silver zinc dichromate plating provides superior protection against rust and corrosion
• 100% dynamic mill balanced for smooth, vibration-free operation
• Chamfered drill holes and rounded slots to minimize stress cracking
• Direct OE fit with weight and vane counts matching original equipment design
• Manufacturer Part Number: AR8780XPR
• Sold as a pair of front rotors

Fits select 2002-2024 Chrysler Aspen, Dodge Durango, and Ram 1500 models.

Power Stop Evolution drilled and slotted rotors provide a direct bolt-on upgrade for your vehicle's factory braking system. Engineered for improved thermal management, these rotors feature precision cross-drilled holes to maximize cooling during heavy use and rounded slots that sweep away gas, dust, and moisture. This ensures a clean contact patch between the pad and rotor for consistent stopping power in all conditions.

Each rotor is manufactured to strict tolerances for DTV (Disc Thickness Variation) and runout, featuring a weight and vane count that matches the original equipment design. The silver zinc dichromate plating provides a protective barrier against rust and corrosion, while 100% dynamic mill balancing ensures smooth, vibration-free performance.

• Precision cross-drilled for maximum heat dissipation and cooling
• Rounded slots sweep away debris for a clean friction surface
• Silver zinc dichromate plating for long-lasting corrosion resistance
• 100% dynamic mill balanced for quiet, smooth operation
• Direct OE fitment with no modifications required
• Manufacturer Part Number: AR8752XPR
• Sold as a pair (Set of 2)

Fits select 2002-2024 Chrysler Aspen, Dodge Durango, Ram 1500, and Ram 1500 Classic.

Power Stop Evolution drilled and slotted rotors provide a direct bolt-on performance upgrade for heavy-duty SUVs and trucks. These rotors are engineered to combat heat build-up and brake fade using precision cross-drilled holes for maximum cooling during towing or spirited driving. The rounded slots effectively sweep away gas, dust, and moisture to maintain a clean friction contact patch for consistent stopping power.

• Precision cross-drilled for maximum cooling and optimum performance in extreme conditions
• Rounded slots sweep away gasses, dust, and water to keep the rotor surface clean
• Silver zinc dichromate plating protects against rust and corrosion
• Chamfered drill holes minimize the risk of stress cracking
• 100% dynamic mill balanced for smooth, quiet, vibration-free operation
• Direct OE fit with weight and vane counts matching original equipment design
• Sold as a pair for the front axle
• Manufacturer Part Number: AR8750XPR