Fits select 1999-2010 Volkswagen Beetle, Golf, and Jetta models (1.8T). This high-efficiency sport upgrade kit is engineered for fast street cars, SUVs, and light trucks that require maximum stopping power without a full big brake conversion.

The EBC S5 kit combines flagship Yellowstuff high-friction pads with GD series wide-aperture rotors. The GG-rated Yellowstuff pads are fully shimmed, chamfered, and slotted to reduce noise while providing a high-friction bite. They feature a patented Brake-In coating to ensure rapid pad seating right out of the box. The accompanying GD series rotors are cast from G3000 iron and feature wide slots and spot-drilled dimples. This design promotes cooling and facilitates the rapid removal of dust, gas, and debris to maintain consistent contact and prevent brake fade during spirited driving.

• Direct-fit replacement for factory braking components with no modifications required.
• Yellowstuff pads provide high-friction performance for street and track-day use.
• GD series rotors feature a Geomet anti-rust coating to maintain a clean appearance.
• Wide-aperture slots help pull cool air under the braking zone to reduce operating temperatures.
• Includes high-friction pads, dimpled and slotted rotors, and caliper lubricant.
• Manufacturer Part Number: S5KF1209
• Warranty: 10,000-mile no-hassle manufacturer warranty.

Fits select 1998-1999 Ford F-250 and F-350 Super Duty models.

The EBC Brakes S5 series is a high-efficiency sport upgrade kit designed for drivers who demand maximum stopping power from their trucks and SUVs. This matched set combines EBC flagship Yellowstuff GG-rated high friction pads with GD series wide aperture slotted rotors to significantly reduce brake fade and increase thermal capacity over stock components.

• Yellowstuff Pads: High friction pads that are fully shimmed, chamfered, and slotted. Features a patented Brake-In surface coating for accelerated pad seating and a GG friction rating for immediate cold bite.
• GD Series Rotors: Manufactured from G3000 cast iron with wide aperture slots and spot drilling. The design ensures efficient removal of dust, gas, dirt, and debris while maintaining cooler operating temperatures.
• Corrosion Protection: Rotors are finished with a Geomet anti-rust coating to maintain aesthetics and long-term durability.
• Direct Fit: Bolts directly to factory mounting points with no modifications required to the stock braking setup.
• Complete Kit: Includes high-performance pads, vented sport rotors, and caliper lubricant (S5KF1197).

Vehicle Fitment:

Fits 1997-2004 Chevrolet Corvette (Base, Z06) and 2004 Cadillac XLR. This EBC Brakes S5 kit is a high-efficiency sport upgrade designed for high-horsepower street cars, trucks, and SUVs that require maximum stopping power without a full big-brake conversion. The kit pairs EBC’s flagship Yellowstuff high-friction pads with GD series wide-aperture slotted rotors to significantly reduce brake fade and improve initial bite.

The included Yellowstuff pads carry a GG friction rating and feature a patented Brake-In coating for rapid pad seating. To ensure quiet operation and a professional fit, each pad is fully shimmed, chamfered, and slotted. The GD series rotors are cast from high-quality G3000 iron and feature wide-aperture slots and spot-drilled vents that pull cool air across the friction surface while effectively removing gas, dirt, and debris. A Geomet anti-rust coating is applied to all non-friction surfaces to maintain a clean appearance behind your wheels.

• Direct-fit installation with no vehicle modifications required
• Yellowstuff high-friction pads with GG rating for superior thermal management
• GD series wide-aperture slotted and spot-drilled rotors
• G3000 cast iron construction with Geomet anti-corrosion finish
• Patented Brake-In coating for faster bedding
• Includes brake pads, rotors, and caliper lubricant
• Manufacturer Part Number: S5KF1079
• Warranty: 10,000-mile no-hassle manufacturer warranty

Fits select 2017-2022 Ford F-150 and Expedition, Lincoln Navigator, Kia Optima, Toyota 86, Camry, and Corolla, and Volkswagen Passat. This EBC Brakes S3 kit provides a matched performance upgrade by combining high-efficiency brake pads with precision-engineered dimpled and slotted rotors.

The rotors are cast from premium G3000 metallurgy and feature a dimpled and slotted design to effectively vent brake gases and maintain a clean pad surface during spirited driving or light towing. Every rotor is fully balanced and run-out tested to ensure smooth, vibration-free operation. To combat corrosion, the rotors are finished with a thermic Geomet anti-rust coating. The included EBC pads feature a patented Brake-in coating to accelerate the bedding process and ensure immediate stopping power following installation.

• Manufacturer Part Number: S3KR1208
• Rotor Material: G3000 performance-grade cast iron
• Rotor Style: Dimpled and slotted for degassing and cooling
• Finish: Geomet anti-rust coating for long-term corrosion resistance
• Pad Coating: Patented EBC Brake-in surface treatment
• Includes: Front/Rear performance pads and matched rotors

Fits select 2018-2022 Ford, Kia, Lincoln, Toyota, and Volkswagen models.

The EBC Brakes S3 Series Brake Pad and Rotor Kit (S3KF1336) is a comprehensive performance upgrade designed for trucks, SUVs, and passenger cars that require improved stopping power for light towing or spirited driving. This kit replaces worn OE components with high-efficiency pads and precision-machined rotors to deliver consistent thermal management and reduced brake fade.

• G3000 Performance Rotors: Cast from premium G3000 iron, these rotors feature a dimpled and slotted design to vent gases, dust, and debris while maintaining superior structural integrity compared to fully drilled rotors.
• Geomet Anti-Rust Coating: Each rotor is treated with a thermic Geomet finish to provide long-lasting corrosion resistance and a clean, professional appearance.
• High-Efficiency Pads: Formulated for moderately upgraded vehicles, these pads feature EBC’s patented Brake-in surface coating to accelerate the bedding process and ensure immediate stopping power.
• Precision Balanced: All rotors are fully balanced and run-out tested to eliminate vibration and ensure smooth, quiet braking performance.

• Manufacturer Part Number: S3KF1336
• Rotor Material: G3000 Iron
• Rotor Design: Dimpled and Slotted
• Coating: Geomet Anti-Rust
• Included Components: Full set of brake pads and a pair of rotors

Fits 1998-1999 Ford F-250 and 1999 Ford F-250/F-350 Super Duty.

The EBC Brakes S3 Brake Pad and Rotor Kit (S3KF1083) is a comprehensive Stage 3 upgrade designed for light trucks and SUVs that require improved stopping power for daily driving and moderate towing. This kit replaces worn factory components with precision-engineered materials to reduce brake fade and maintain consistent pedal feel under load.

The included brake pads are manufactured with high-efficiency Aramid fibers. They are fully shimmed, slotted, and chamfered to minimize vibration and noise, and feature EBC’s patented Brake-in coating for rapid pad seating immediately after installation. These pads are matched with G3000 wide-aperture slotted sport rotors. These vented rotors use wide slots to draw cool air into the braking area while effectively clearing dust, dirt, and debris for cooler operation and lifetime parallel pad wear.

• G3000 Sport Rotors: Wide aperture slots and spot drilling for maximum cooling and debris removal.
• Geomet Finish: Complete anti-rust coating protects the rotor surfaces and maintains a clean appearance.
• Aramid Fiber Pads: High-friction compound provides significantly better bite than standard OE pads.
• Direct Fit Installation: Replaces factory hardware with no modifications required to the stock setup.
• Included Hardware: Comes with pads, rotors, and high-temperature caliper lube.
• MPN: S3KF1083

Fits select 1997-2015 Acura ILX, Honda Civic, and Honda Prelude models. See compatibility table for full fitment details.

EBC GD Series Sport Rotors are engineered for drivers seeking improved braking performance and heat management. Manufactured from high-quality OE-spec grey cast iron, these rotors feature a unique wide-slotted and dimpled pattern designed to draw cool air into the braking zone. This reduces brake temperatures by up to 200 degrees compared to solid rotors, significantly minimizing brake fade under heavy load or spirited driving conditions.

The precision-machined slots help clear dirt, dust, and gases from the rotor surface, ensuring consistent pad contact and improved wet-weather performance. For import applications, these rotors are finished with a gold anodized coating to provide corrosion resistance and a premium appearance. Every rotor is rigorously tested for grain structure, tensile strength, and runout to ensure a perfect fit and long-lasting durability.

• Dimpled and slotted design reduces brake fade and operating temperatures
• Maintains flat and parallel pad wear while clearing debris from the contact patch
• Constructed from premium G3000 spec grey cast iron
• Gold anodized finish for superior corrosion protection on import models
• Precision machined and balanced to ensure minimal runout
• Manufacturer Part Number: GD7345

Fits 2008-2013 BMW 128i Base.

EBC Brakes GD Sport series rotors are engineered for drivers who demand consistent stopping power and improved thermal management. These rear rotors feature a signature dimpled and wide-slotted design that provides the degassing benefits of a drilled rotor without the risk of structural stress cracks. The wide-aperture slots actively pull cool air across the pad surface, reducing brake temperatures by up to 200 degrees to prevent brake fade under spirited driving or heavy loads.

Constructed from high-quality OE-spec grey cast iron, every GD1671 rotor undergoes rigorous element analysis and tensile strength testing. The dimpled surface ensures that gas, dirt, and debris are efficiently swept away from the contact patch, maintaining a clean braking zone for better pad bite. These rotors are finished with a gold anodized coating to protect against corrosion and maintain a clean appearance behind your wheels.

• Precision-machined from OE-spec grey cast iron for maximum durability
• Wide-slot design helps brakes run cooler and reduces fade at speed
• Blind-drilled dimples allow for surface degassing without compromising disc integrity
• Gold anodized finish provides superior protection against rust and corrosion
• 100% runout tested for perfect balance and vibration-free performance
• Direct-fit replacement for factory rear rotors
• Manufacturer Part Number: GD1671

Fits select 2007-2015 BMW X5 and X6 models (4.8i, sDrive35i, xDrive35d, xDrive35i, and xDrive48i).

EBC Brakes GD Sport rotors are engineered to provide superior cooling and degassing for heavy SUVs and performance vehicles. These rotors feature wide-aperture slots that draw cool air under the brake pad surface while simultaneously expelling dust, dirt, and hot gases. Unlike traditional cross-drilled rotors, the GD series uses blind-drilled dimples that prevent stress cracks and maintain structural integrity under heavy thermal loads, making them an ideal choice for towing and spirited driving.

Constructed from high-quality OE-spec grey cast iron, each rotor undergoes rigorous testing for tensile strength, grain structure, and hardness. To ensure a vibration-free installation, every unit is 100% runout tested. These rotors feature a gold anodized finish to protect against corrosion in exposed areas of the rotor hub and vanes.

• Dimpled and slotted design reduces brake fade and operating temperatures
• Wide slots help maintain a clean pad-to-rotor contact patch
• Gold anodized finish provides corrosion resistance
• Precision machined from OE-spec grey iron castings
• 100% runout tested for smooth, quiet operation
• Direct replacement for factory front rotors
• Manufacturer Part Number: GD1521

Fits 2018-2023 Genesis G80 (Rear Left).

Upgrade your vehicle's braking performance and aesthetics with the R1 Concepts Geo-Carbon Series brake rotor. This rear left rotor is engineered for drivers seeking both reliability and a performance edge. Featuring a precision-drilled and slotted surface, it effectively manages heat and debris to maintain consistent stopping power. The cross-drilled holes facilitate superior cooling during heavy braking, while the diamond-cut slots sweep away gas and dust to keep the pad surface clean.

Built for durability, this rotor features a specialized Geo-Carbon coating that provides a high level of protection against rust and corrosion, ensuring the hub and vanes remain clean over time. It is designed as a direct-fit replacement, bolting onto factory mounting points without the need for modifications.

• Precision-drilled holes for maximum heat dissipation and reduced brake fade
• Diamond-cut slots to clear away brake dust, gases, and moisture
• Advanced Geo-Carbon coating for superior corrosion resistance and longevity
• Cast to meet or exceed OE material specifications for reliable performance
• Manufacturer Part Number: 830-03056L

Fits select 2016-2026 BMW (2, 3, 4, 5, 6, 7, 8 Series, i4, iX, X3, X4, X5, X6, X7, Z4) and Toyota GR Supra models.

This R1 Concepts performance brake rotor provides a direct-fit replacement for your factory left front disc, engineered for improved thermal stability and consistent stopping power. The precision cross-drilled holes maximize heat dissipation to mitigate brake fade during intensive use, while the machined slots continuously clear brake dust and gases from the pad surface. This ensures a clean contact patch and reliable friction in both wet and dry conditions.

• Position: Left Front
• Design: Cross-Drilled and Slotted
• Finish: Silver Zinc Coating for enhanced corrosion protection
• Rotor Type: Vented for superior cooling
• Manufacturer Part Number: 631-31134D

The silver zinc finish provides a clean, premium look behind your wheels while protecting the non-frictional surfaces of the rotor from rust and oxidation.

Fits select 2016-2026 BMW (2, 3, 4, 5, 6, 7, 8 Series, i4, iX, X3, X4, X5, X6, X7, Z4) and Toyota GR Supra models. This R1 Concepts silver-series brake rotor is engineered for the front right position to provide enhanced thermal management and debris evacuation over standard blank rotors.

• Drilled and Slotted Design: Precision cross-drilled holes increase surface area for heat dissipation, while diamond-cut slots sweep away gas, dust, and moisture to maintain consistent pad-to-rotor contact.
• Silver Finish: Provides a clean appearance behind the wheels and helps protect non-contact surfaces against oxidation and corrosion.
• Direct OE Fitment: Designed to bolt directly to the factory mounting points without the need for modifications or specialized hardware.
• System Compatibility: Compatible with factory braking systems and standard-size pads.
• Position: Front Right (Passenger Side)
• Manufacturer Part Number: 631-31133D

Fits select 2016-2026 BMW models (including 2, 3, 4, 5, 7, 8 Series, X3, X4, X5, X6, X7, Z4, i4, i5, iX) and 2020-2025 Toyota GR Supra.

The R1 Concepts 631-31130R Rear Right Drilled & Slotted Brake Rotor is engineered for drivers who demand improved thermal management and consistent stopping power. This performance rotor features precision-drilled holes to maximize heat dissipation and prevent brake fade during spirited driving or heavy vehicle loads. The diamond-slotted design effectively wipes away water, gases, and brake dust, ensuring a clean contact patch between the pad and rotor surface for a more responsive pedal feel.

• Position: Rear Right
• Design: Cross-drilled and diamond-slotted for superior cooling and debris evacuation
• Finish: Silver zinc plating to provide lasting corrosion resistance on the hub and vanes
• Direct Fit: Replaces factory equipment with no modifications required
• Material: Cast iron construction for durability and high-tensile strength
• Part Number: 631-31130R

Whether you are maintaining a daily driver or upgrading a performance-oriented BMW or Toyota GR Supra, this rotor provides the reliability and aesthetics of a high-performance braking system while adhering to strict tolerances for a vibration-free installation.

Fits select 2016-2026 BMW (2, 3, 4, 5, 6, 7, 8 Series, i4, i5, iX, X3, X4, X5, X6, X7, Z4) and 2020-2025 Toyota GR Supra. This R1 Concepts silver-series brake rotor is engineered to provide superior heat dissipation and gas venting for consistent stopping power in demanding conditions.

Designed as a direct replacement for the factory rear left rotor, this unit features precision-drilled holes to reduce operating temperatures and diamond-cut slots that sweep away debris and brake gases. The silver zinc plating helps protect the rotor's hub and vanes from corrosion, maintaining a clean appearance behind your wheels.

• Precision Drilled: Maximizes heat dissipation to prevent brake fade.
• Diamond Slotted: Increases bite and acts as a visual wear indicator while clearing out brake dust.
• Corrosion Protection: Silver zinc coating prevents rust for lasting durability.
• Direct Fit: Machined to exact OE specifications for seamless installation without modifications.
• Manufacturer Part Number: 631-31130L

Fits select 2019-2024 Ram 2500 trucks including Big Horn, Laramie, Limited, Power Wagon, Rebel, and Tradesman models.

Designed for heavy-duty applications, the Power Stop Z36 Truck & Tow Brake Upgrade Kit provides the increased stopping power required for towing, hauling, and off-road driving. This kit replaces the factory rear components with severe-duty carbon-fiber ceramic pads and high-performance drilled and slotted rotors, ensuring your Ram 2500 maintains reliable braking performance during long mountain descents and under heavy loads.

• Carbon-Fiber Ceramic Pads: Proprietary Z36 compound offers high-torque stopping power while maintaining low-dust performance, validated through 3rd-party testing to produce 30% less dust than OE pads.
• Drilled & Slotted Rotors: Precision-machined to maximize heat dissipation and prevent brake fade; finished with silver zinc plating to protect against rust and corrosion.
• Severe-Duty Hardware: Includes stainless-steel installation hardware and premium shims to resist the extreme temperatures common in heavy-duty towing.
• Direct Fit: Engineered as a complete bolt-on upgrade for the factory rear braking system with no modifications required.
• MPN: K8641-36

Included in the Box: Two silver zinc-plated rear brake rotors, a set of Z36 carbon-fiber ceramic rear pads, stainless-steel hardware, and high-temperature ceramic brake lubricant.

Fits 2019-2024 Ram 3500 models (including Big Horn, Laramie, Limited, SLT, and Tradesman).

The Power Stop Z36 Truck & Tow Brake Upgrade Kit is engineered to handle the intense thermal stress of towing, hauling, and navigating steep mountain descents. This rear kit replaces factory components with severe-duty Z36 carbon-fiber ceramic brake pads and precision-drilled and slotted rotors, providing a significant increase in stopping power for heavy-duty applications without sacrificing daily drivability.

• Z36 Carbon-Fiber Ceramic Pads: Reinforced compound designed for heavier loads; validated in 3rd party testing to produce an average of 30% less dust than OE pads.
• Drilled & Slotted Rotors: Precision-drilled holes and slots maximize heat dissipation and gas venting to maintain cooler brake temperatures and prevent fade.
• Corrosion Protection: Rotors are zinc-plated to resist rust and corrosion in harsh environments.
• Complete Hardware: Includes premium stainless steel installation hardware, high-temperature shims, and ceramic brake lubricant.
• Direct Fit: Designed as a bolt-on upgrade for stock brakes with no modifications necessary.

Specifications: Manufacturer Part Number: K8637-36; Position: Rear; Rotor Finish: Zinc Plated; Pad Material: Carbon-Fiber Ceramic.

Fits select 2019-2024 Ram 2500 and 3500 trucks (Big Horn, Laramie, Limited, Power Wagon, Tradesman, and more).

The Power Stop Z36 Truck & Tow Brake Kit (K8478-36) is a severe-duty braking solution engineered specifically for Ram trucks that handle heavy loads, tow trailers, or navigate steep mountain descents. This front-axle upgrade replaces worn factory components with a bolt-on performance system designed to manage increased thermal stress and provide reliable stopping power without sacrificing everyday drivability.

• Carbon-Fiber Ceramic Pads: Proprietary Z36 compound combines the strength of carbon fiber with a ceramic matrix to handle higher temperatures and heavier loads than standard OE pads.
• Drilled & Slotted Rotors: Precision-drilled holes maximize cooling, while rounded slots sweep away gas and debris to maintain a clean contact patch and prevent brake fade.
• Corrosion Protection: Each rotor is silver zinc plated to resist rust and maintain a clean aesthetic behind the wheels.
• Low-Dust Performance: Validated through third-party testing in Los Angeles to produce approximately 30% less dust than original equipment pads.
• Complete Installation Kit: Includes stainless-steel installation hardware, high-temperature ceramic brake lubricant, and stainless-steel shims for improved heat dissipation.

Fits 2013-2018 Ram 3500 models (Big Horn, Laramie, Limited, Lone Star, SLT, ST, and Tradesman).

The Power Stop Z36 Truck & Tow Brake Upgrade Kit (K7131-36) is engineered for vehicles that face the extreme thermal demands of towing, hauling, and mountainous terrain. This rear-axle kit replaces the factory components with a high-performance system designed to provide severe-duty stopping power without the noise or excessive dust common in heavy-duty brake pads.

The Z36 carbon-fiber ceramic pads offer a higher coefficient of friction than standard OE pads, providing the bite needed for heavy loads. They are paired with drilled and slotted rotors that maximize heat dissipation and gas venting, keeping temperatures down during long descents. Every rotor is finished with silver zinc plating to prevent corrosion and maintain a clean appearance behind the wheels.

• Carbon-fiber reinforced ceramic brake pads for increased stopping power under heavy loads.
• Drilled and slotted rotors improve cooling and prevent brake fade.
• Silver zinc plating provides maximum protection against rust and corrosion.
• Premium stainless steel hardware and high-temperature ceramic lubricant included for a complete installation.
• Validated low-dust performance, producing an average of 30% less dust than OE pads.
• Direct bolt-on design fits factory mounting points with no modifications required.
• Manufacturer Part Number: K7131-36

Fits select 2015-2019 Chevrolet Silverado 2500 HD, Suburban 3500 HD, and GMC Sierra 2500/3500 HD.

The Power Stop Z36 Truck & Tow Brake Kit (Rear) is engineered for heavy-duty vehicles that tow trailers, haul heavy payloads, or navigate steep mountain grades. This complete rear upgrade replaces worn factory components with a severe-duty system designed to manage the extreme thermal stress of high-demand driving. By combining carbon-fiber reinforced ceramic pads with precision-machined rotors, this kit provides consistent bite and shorter stopping distances when it matters most.

This kit features Z36 Carbon-Fiber Ceramic brake pads, providing the friction necessary for heavy loads without the excessive dust or noise typical of semi-metallic pads. They are paired with drilled and slotted rotors that maximize airflow to dissipate heat rapidly and sweep away debris. To ensure longevity in harsh environments, every rotor is silver zinc-plated to resist rust and corrosion.

• Carbon-fiber ceramic Z36 pads provide increased braking torque for heavy loads.
• Drilled and slotted rotors significantly reduce operating temperatures during towing.
• Silver zinc plating protects rotors against rust and corrosion.
• Validated low-dust formula produces approximately 30% less dust than OE components.
• Includes premium stainless-steel hardware and high-temperature ceramic lubricant.
• Direct bolt-on installation to factory mounting points with no modifications required.
• Manufacturer Part Number: K6993-36

Fits select 2012-2020 Chevrolet Silverado 2500 HD/3500 HD, Suburban 3500 HD, and GMC Sierra 2500 HD/3500 HD.

The Power Stop Z36 Truck & Tow Brake Upgrade Kit is a complete bolt-on solution for heavy-duty trucks and SUVs that work as hard as they play. Designed to handle the high thermal stress of towing, hauling, and navigating steep mountain descents, this front brake kit replaces worn factory components with performance-grade hardware. The proprietary carbon-fiber ceramic Z36 pads provide significant stopping power for increased loads while maintaining low-dust performance, validated through 3rd-party testing to produce an average of 30% less dust than OE pads.

These pads are paired with precision drilled and slotted rotors that maximize heat dissipation and prevent brake fade. Each rotor features silver zinc plating to resist rust and corrosion, ensuring long-term durability and a clean appearance. This comprehensive kit includes everything needed for a successful installation, including stainless-steel hardware and high-temperature ceramic brake lubricant.

• Carbon-Fiber Ceramic Compound: Proprietary Z36 pads offer enhanced strength for severe-duty applications.
• Cooling Efficiency: Drilled and slotted rotors sweep away gas and debris while reducing operating temperatures.
• Corrosion Resistance: Zinc-plated rotors protect against oxidation in harsh environments.
• Stainless-Steel Hardware: Includes high-quality shims and installation hardware to resist heat-related fatigue.
• Validated Performance: Low-dust formula keeps wheels cleaner during heavy-duty use.
• Manufacturer Part Number: K6258-36

Fits 2012-2021 Dodge Durango SRT and Jeep Grand Cherokee SRT/SRT8. The Power Stop Z26 Street Warrior Brake Upgrade Kit (MPN K5957-26) is engineered specifically for high-performance SUVs that demand superior stopping power without the compromises of a track-only pad. This front-axle kit replaces your worn factory components with a complete bolt-on solution designed to handle higher operating temperatures during aggressive street driving.

The included Z26 Carbon-Fiber Ceramic brake pads feature a proprietary formula that enhances heat dissipation compared to standard ceramic pads, significantly reducing brake fade. These pads are paired with precision-drilled and slotted rotors that facilitate maximum cooling and sweep away gas and debris to maintain a consistent friction surface. Each rotor is finished with silver zinc plating to protect against corrosion and maintain a clean appearance behind your wheels.

• Proprietary Carbon-Fiber Ceramic Pads: Z26 formula offers increased thermal stability and improved bite at high speeds.
• Drilled & Slotted Rotors: Provides superior heat management and gas evacuation for shorter, more reliable stops.
• Low-Dust Validation: On-vehicle testing shows an average of 30% less dust compared to OE brake components.
• Zinc Plated Finish: Provides a durable barrier against rust and corrosion on the non-friction surfaces of the rotor.
• Complete Hardware Kit: Includes stainless steel installation hardware, premium shims, and high-temperature ceramic lubricant.

Fits select 2012-2021 Dodge Durango SRT and Jeep Grand Cherokee SRT/SRT8.

The Power Stop Z23 Evolution Sport Brake Upgrade Kit (K5957) is a comprehensive solution designed to improve the stopping power of your daily driver. This front-axle kit replaces worn OE components with high-performance carbon-fiber ceramic pads and precision-engineered drilled and slotted rotors, providing a significant upgrade in braking torque and thermal management without sacrificing street drivability.

The Z23 carbon-fiber ceramic compound is engineered for low-dust performance, producing an average of 30% less dust than original equipment based on third-party testing. The included performance rotors feature precision-drilled holes for maximum cooling and rounded slots to sweep away gas and debris. To ensure longevity, the rotors are finished with a silver zinc plating to protect against rust and corrosion.

• Carbon-Fiber Ceramic Pads: Z23 compound provides high-performance braking with minimal dust and noise.
• Drilled & Slotted Rotors: Engineered for superior heat dissipation and consistent pad contact.
• Zinc Plating: Silver zinc finish protects rotors from corrosion in harsh environments.
• Premium Hardware: Includes stainless-steel installation clips and high-temperature ceramic brake lubricant.
• Noise-Free Performance: Multi-layer rubberized shims dampen vibration for quiet operation.
• Direct Fit: Designed as a bolt-on upgrade for stock brake systems with no modifications required.
• Manufacturer Part Number: K5957

Fits select 2010-2013 Ford F-250 Super Duty and 2010-2012 Ford F-350 Super Duty trucks.

The Power Stop Z36 Truck & Tow Brake Upgrade Kit is specifically engineered for vehicles that handle heavy loads, towing, and steep mountain descents. This complete rear axle solution replaces worn factory components with a severe-duty system designed to manage increased thermal stress without sacrificing everyday drivability. The kit features proprietary carbon-fiber ceramic brake pads that offer higher friction coefficients than standard ceramic compounds, providing the extra stopping power needed for hauling trailers or navigating off-road trails.

• Carbon-fiber reinforced ceramic Z36 brake pads for superior stopping power under heavy load
• Drilled and slotted rotors maximize heat dissipation to prevent brake fade on long descents
• Silver zinc plating on rotors provides maximum protection against rust and corrosion
• Low-dust friction formula validated through 3rd party testing to produce 30% less dust than OE pads
• Premium stainless steel hardware kit and high-temperature ceramic lubricant included
• Stainless steel pad shims help dissipate heat and eliminate brake noise
• Direct bolt-on upgrade that requires no modifications to factory mounting points
• Manufacturer Part Number: K5578-36

Fits select 2003-2008 Dodge Ram 1500, 2500, and 3500.

The Power Stop Z36 Truck & Tow Brake Upgrade Kit is engineered for drivers who demand more from their heavy-duty vehicles. Whether you are towing a trailer, hauling equipment to the jobsite, or navigating steep mountain descents, this front brake kit provides the increased stopping power and thermal stability required for severe-duty applications. This complete bolt-on solution replaces your factory components with high-performance hardware designed to handle the added stress of heavier loads and larger tire diameters.

• Carbon-Fiber Ceramic Pads: Proprietary Z36 pads provide severe-duty performance while remaining low-dust, validated in 3rd-party testing to produce 30% less dust than OE pads.
• Drilled & Slotted Rotors: Precision-machined to maximize heat dissipation and maintain lower operating temperatures during high-demand braking.
• Corrosion Protection: Rotors are zinc-plated to resist rust and maintain a clean appearance.
• Complete Hardware Kit: Includes premium stainless-steel shims and installation hardware, plus high-temperature ceramic lubricant.
• Direct Fit: Designed as a bolt-on upgrade for stock brake systems with no modifications necessary.
• Part Number: K2203-36

Fits select 2005-2011 Ford F-250 and F-350 Super Duty trucks.

The Power Stop Z36 Truck & Tow Brake Upgrade Kit (K1781-36) is engineered for heavy-duty applications where standard brake systems often fall short. Designed specifically for trucks that tow, haul, or run oversized wheels and tires, this front brake kit provides the increased thermal capacity needed for long mountain descents and stop-and-go towing without brake fade. The kit replaces your factory front components with high-performance hardware that bolts directly to OEM mounting points for a straightforward installation.

• Z36 Carbon-Fiber Ceramic Pads: Proprietary ceramic compound reinforced with carbon fibers to handle high-temperature stress while remaining low-dust and noise-free.
• Drilled & Slotted Rotors: Precision-drilled holes for maximum cooling and rounded slots to sweep away debris and gas, maintaining a clean contact patch.
• Zinc Plating: Every rotor is silver zinc plated to protect against rust and corrosion in harsh environments.
• Stainless Steel Hardware: Includes premium shims for heat insulation and a complete set of stainless steel installation hardware.
• Complete Kit: Includes front rotors, brake pads, and high-temperature ceramic lubricant to complete the service.

Fits 2005-2012 Ford F-350 Super Duty (Rear Right).

Upgrade your heavy-duty truck's braking performance with the Power Stop Evolution Drilled & Slotted Brake Rotor. This Evolution series rotor is engineered as a direct replacement for the factory unit, specifically designed to handle the high thermal loads associated with towing and hauling. The precision-machined holes and slots work together to significantly reduce brake fade and improve pad-to-rotor contact.

• Drilled Cooling Holes: Lowers operating temperatures by allowing air to flow through the rotor, preventing heat soak during heavy braking.
• Rounded Slots: Effectively sweeps away gas, dust, and moisture to maintain a consistent friction surface and improve wet weather performance.
• Silver Zinc Plating: Applied to the entire rotor surface to help prevent rust and corrosion, ensuring a clean appearance behind the wheel.
• Direct Fit: Designed to bolt on to factory mounting points without modification.
• Position: Rear Right (Passenger Side)
• MPN: AR85116XR

Fits select 2005-2012 Ford F-250 and F-350 Super Duty models.

Upgrade your heavy-duty truck’s braking performance with Power Stop rear drilled and slotted rotors. These rotors are engineered as a direct bolt-on replacement for factory components, requiring no modifications for installation. To maintain consistent friction contact, the rounded slots effectively sweep away gas, dust, and moisture from the rotor surface. For thermal management, precision cross-drilled holes maximize airflow to keep temperatures low during extreme towing or hauling conditions.

Constructed to strict tolerances for Disc Thickness Variation (DTV) and runout, these rotors provide smooth, quiet braking. The silver zinc dichromate plating offers a durable barrier against rust and corrosion, while the 100% dynamic mill balancing ensures stable performance at speed.

• Direct OE fitment with no modifications required
• Precision cross-drilled for maximum heat dissipation
• Rounded slots maintain a clean friction contact patch
• Silver zinc dichromate plating for corrosion resistance
• 100% dynamic mill balanced for vibration-free operation
• Chamfered drill holes and rounded slots minimize stress cracking
• Matches original equipment weight and vane count for reliable performance
• Manufacturer Part Number: AR85116XPR
• Sold as a pair

Fits 2005-2012 Ford F-350 Super Duty models.

The Power Stop Evolution Drilled & Slotted brake rotor (AR85116XL) is a high-performance replacement for the rear left position, engineered to handle the demands of heavy-duty hauling and towing. This rotor features precision-drilled holes to facilitate maximum cooling, keeping brake temperatures down during intense use. Rounded slots effectively sweep away gas, moisture, and dust, ensuring a clean contact patch for consistent braking performance and improved pedal feel.

Constructed to OE specifications for a direct bolt-on fit, this rotor is finished with a silver zinc plating to protect against rust and corrosion, maintaining both performance and aesthetics behind your wheels.

• Direct replacement for the rear left factory rotor
• Precision-drilled holes for superior heat dissipation
• Rounded slots to clear debris and maintain pad-to-rotor contact
• Silver zinc plating for enhanced corrosion resistance
• Cast to OE-style vanes and dimensions for reliable fitment
• Manufacturer Part Number: AR85116XL

Fits select 2012-2020 Jeep Grand Cherokee (SRT/SRT8) and 2018-2020 Dodge Durango models.

Power Stop drilled and slotted rotors (AR83080XPR) provide a precision-engineered bolt-on upgrade for the front braking system. Designed to handle the high thermal loads of heavy-duty and performance SUVs, these rotors are cross-drilled to maximize cooling and rounded-slotted to effectively clear gases, dust, and moisture from the friction surface. Each rotor is finished with silver zinc dichromate plating to resist rust and maintain a clean appearance behind your wheels.

• Precision cross-drilled for maximum heat dissipation and thermal management.
• Rounded slots sweep away debris to maintain a clean rotor-to-pad contact patch.
• Silver zinc dichromate plating protects against corrosion and oxidation.
• Chamfered drill holes and rounded slots help prevent stress cracking under heavy use.
• 100% dynamic mill balanced for smooth, vibration-free operation.
• Manufactured to strict tolerances for disc thickness variation (DTV) and runout.
• Vane count and weight matched to original equipment specifications for consistent performance.
• Direct OE fit; requires no modifications to the factory braking system.

This Part Fits:

Fits 2012-2020 Jeep Grand Cherokee (Front Left).

The Power Stop Evolution Drilled & Slotted Brake Rotor (AR83080XL) is engineered for drivers looking to improve stopping power and thermal management. This front left rotor features precision-machined drill holes to significantly reduce operating temperatures during heavy braking, paired with rounded slots that sweep away gas, dust, and debris for a consistent contact patch between the pad and rotor surface.

Designed as a direct bolt-on replacement for the factory unit, the Evolution series rotor utilizes a silver zinc plating to provide a layer of protection against corrosion, helping to maintain a clean appearance behind your wheels. Whether you are daily driving or hauling a load, these rotors provide the bite and cooling performance required for the Jeep Grand Cherokee platform.

• Position: Front Left
• Series: Evolution Drilled & Slotted
• Direct fit replacement for original equipment
• Precision drill holes for maximum rotor cooling
• Rounded slots to clear gas and brake dust
• Silver zinc plated for corrosion resistance
• Manufacturer Part Number: AR83080XL