Fits select 2003-2019 Infiniti EX35, EX37, G25, G35, G37, M35, M37, M45, Q40, Q70, Q70L, and Nissan Murano.

The EBC Brakes S10 Brake Pad and Rotor Kit is an engineered upgrade designed for enthusiasts seeking a significant improvement over original equipment (OE) braking performance. This matched kit provides a cost-effective solution for SUVs, light trucks, and sport compacts, featuring pads and rotors specifically paired to ensure maximum compatibility and stopping power. The pads are constructed from a high-friction Aramid fiber compound, fully shimmed, slotted, and chamfered to minimize noise and improve pedal feel. Each pad includes the EBC patented Brake-in coating to accelerate the bedding process immediately after installation.

Paired with the pads are G3000-spec sport vented rotors, featuring wide-aperture slots and spot drilling. These design elements effectively draw cool air into the braking contact zone while clearing dust, dirt, and debris to maintain a flat, parallel pad wear pattern. The rotors are finished with a Geomet anti-rust coating to prevent corrosion on non-contact surfaces, ensuring a clean appearance and long-term durability.

• Direct-fit installation requires no modifications to factory caliper setups
• High-efficiency Aramid fiber pads with EBC Brake-in seating coating
• G3000 sport rotors with wide aperture slots for superior cooling
• Geomet anti-rust finish prevents rotor corrosion
• Includes high-quality caliper lubricant
• Manufacturer Part Number: S10KF1282
• Warranty: 10,000-mile no-hassle manufacturer coverage

Fits select 2003-2014 Subaru Baja, Forester, Impreza, Legacy, and Outback (including Turbo, WRX, STI, and 3.6R models).

The EBC Brakes S10 Stage 10 Sport Brake Pad and Rotor Kit is an engineered upgrade designed to provide a significant improvement in stopping power over original equipment. This direct-fit kit replaces worn factory components with high-performance materials designed for spirited driving and the demands of SUVs or light trucks. By combining wide-aperture slotted rotors with aramid fiber-reinforced pads, this kit ensures cooler operating temperatures and consistent friction levels.

• High-Efficiency Pads: Built with Aramid fiber, these fully shimmed, slotted, and chamfered pads feature EBC’s patented Brake-In coating for rapid pad seating.
• G3000 Sport Rotors: Wide-aperture slotted and spot-drilled sport vented rotors facilitate airflow, drawing cool air into the braking zone while clearing dirt, dust, and debris.
• Corrosion Protection: Finished with a Geomet anti-rust coating to maintain appearance and prevent rotor seizing.
• Installation: Direct bolt-on replacement; no modifications to the factory setup are required.
• Manufacturer Part Number: S10KF1275
• Warranty: 10,000-mile no-hassle manufacturer warranty.

Each kit includes one pair of sport rotors, a full set of pads, and caliper lubricant to ensure a complete and professional installation.

Fits select 2005-2006 Saab 9-2X and 2002-2014 Subaru Impreza, WRX, STI, Legacy, and Outback models. This EBC S10 Stage 10 Sport Kit is designed as a direct-fit performance upgrade for drivers seeking improved stopping power and thermal management over original equipment components.

The kit features EBC high-efficiency brake pads manufactured with Aramid fiber. These pads are fully shimmed, slotted, and chamfered to reduce noise and vibration. They include the EBC patented Brake-In™ surface coating, which facilitates rapid pad seating and ensures immediate braking effectiveness following installation. These pads provide a significant improvement in friction levels compared to standard OE pads.

Complementing the pads are EBC wide-aperture slotted sport rotors cast from G3000 metallurgy. The wide slots draw cool air into the braking contact zone and effectively clear away dirt, dust, and debris. These vented rotors include spot drilling for additional cooling and are finished with a Geomet anti-rust coating to maintain a clean appearance and prevent corrosion on non-swept surfaces.

• Manufacturer Part Number: S10KF1274
• Pad Material: Aramid fiber with Brake-In™ coating
• Rotor Material: G3000 metallurgy with Geomet anti-rust finish
• Rotor Style: Wide aperture slotted and spot drilled
• Includes: Performance brake pads, sport rotors, and caliper lubricant
• Warranty: 10,000-mile no-hassle manufacturer warranty
• Fitment Type: Direct replacement for factory hardware

Fits select 2003-2021 Honda Accord and Honda Civic models. This EBC S10 Brake Pad and Rotor Kit is a matched upgrade designed to deliver significant improvement in stopping power over original equipment. Engineered for spirited driving and sport compacts, this kit includes high-efficiency EBC brake pads, G3000 sport rotors, and caliper lubricant.

The included pads are constructed from a premium aramid fiber compound that is fully shimmed, slotted, and chamfered to reduce noise. They feature EBC’s patented Brake-in coating to ensure rapid pad seating immediately after installation. Paired with these are wide-aperture slotted and spot-drilled rotors. These G3000 sport vented rotors are designed to draw cool air under the braking surface while clearing dust and debris for consistent performance. Every rotor is finished with a Geomet anti-rust coating to maintain a clean appearance and protect against corrosion.

• Direct-fit upgrade with no modifications required over stock setup
• Aramid fiber brake pads for high-friction performance and thermal stability
• Wide-aperture slotted G3000 sport rotors for cooler operating temperatures
• Geomet anti-rust coating on rotors prevents corrosion
• EBC Brake-in coating for faster pad-to-rotor bedding
• Manufacturer Part Number: S10KF1267
• 10,000-mile no-hassle manufacturer warranty

Fits select 2012-2015 Honda Civic and Acura ILX models.

The EBC S10 Brake Pad and Rotor Kit (S10KF1266) is a high-performance braking upgrade designed for spirited street driving and sport compacts. This direct-fit kit replaces original equipment components with high-efficiency aramid fiber pads and vented G3000 sport rotors, providing a significant improvement in stopping power and thermal management without requiring modifications.

The included pads are fully shimmed, slotted, and chamfered for quiet operation and feature EBC’s patented Brake-in coating for rapid seating post-installation. These are paired with wide-aperture slotted and spot-drilled rotors that actively pull cool air into the braking area while clearing dust and debris for consistent friction. Each rotor is finished with a Geomet anti-rust coating to ensure long-term corrosion resistance and maintain a clean appearance behind your wheels.

• Direct-fit installation with no modifications required over stock setup
• High-efficiency aramid fiber pads with Brake-in coating for fast seating
• G3000 sport vented rotors with wide-aperture slots and spot drilling
• Geomet anti-rust finish for lasting corrosion protection
• 10,000-mile no-hassle manufacturer warranty
• Includes pads, rotors, and caliper lubricant
• Manufacturer Part Number: S10KF1266

Fits select 1999-2014 Acura TL, TSX, CL, and Honda Accord models.

The EBC Brakes S10 Sport Brake Pad and Rotor Kit is an engineered performance upgrade designed for SUVs, light trucks, and sport compacts. This comprehensive kit replaces your factory components with high-efficiency pads and sport-vented rotors, providing a significant improvement in stopping power and thermal management over original equipment (OE) setups.

The included brake pads are manufactured with an Aramid fiber friction material that is fully shimmed, slotted, and chamfered to reduce noise and vibration. These pads feature EBC’s patented Brake-in coating, which accelerates the pad-to-rotor seating process immediately after installation. Paired with these are G3000 sport vented rotors featuring wide-aperture slots and spot drilling. This design draws cool air into the braking contact zone and rapidly clears dust, dirt, and debris to ensure the pads remain flat and parallel throughout their service life.

• High-Efficiency Pads: Aramid fiber construction with Brake-in coating for fast seating.
• G3000 Sport Rotors: Wide-aperture slotted and spot-drilled for maximum cooling.
• Anti-Corrosion Finish: Geomet anti-rust coating prevents corrosion on non-friction surfaces.
• Complete Kit: Includes front/rear pads (as applicable), sport rotors, and caliper lubricant.
• Direct Fit: Bolts to factory mounting points with no vehicle modifications required.
• Manufacturer Part Number: S10KF1228
• Warranty: 10,000-mile manufacturer warranty.

Fits select 2006-2020 Subaru B9 Tribeca, Legacy, Outback, Tribeca, and WRX.

The EBC S10 Brake Pad and Rotor Kit (S10KF1216) is an engineered upgrade designed for drivers seeking a significant improvement in stopping power over factory equipment. By bundling high-efficiency Aramid fiber pads with G3000 sport vented rotors, this kit provides a matched solution that runs cooler and seats faster than standard replacements. The wide aperture slots effectively draw cool air into the braking zone while clearing dirt, dust, and debris for consistent performance in spirited driving conditions.

• High-Efficiency Pads: Constructed with Aramid fiber, these pads are fully shimmed, slotted, and chamfered. They feature the EBC patented Brake-in coating to ensure rapid seating immediately after installation.
• Sport Vented Rotors: G3000 sport rotors feature wide aperture slots and spot drilling to maintain a flat, parallel pad wear surface throughout their service life.
• Corrosion Protection: All rotors are finished with a Geomet anti-rust coating to prevent corrosion on non-friction surfaces.
• Direct Fit: Designed as a direct-fit replacement for the OE setup with no vehicle modifications required.
• Complete Kit: Includes high-performance pads, G3000 slotted rotors, and caliper lubricant.
• Warranty: Includes a 10,000-mile no-hassle manufacturer warranty.

Fits 2007-2013 Mazda 3 i, S, and Mazdaspeed models.

The EBC Brakes S10 Sport Pad and Rotor Kit (S10KF1215) provides a comprehensive braking upgrade for Mazda 3 owners seeking improved thermal management and bite over factory components. This kit pairs EBC’s high-efficiency Aramid fiber pads with wide-aperture slotted G3000 sport rotors to ensure consistent friction levels and reduced brake fade during spirited driving or daily commuting.

• High-Friction Pads: Engineered with Aramid fiber, fully shimmed, slotted, and chamfered to minimize noise and maximize contact.
• Brake-In™ Coating: Features EBC’s patented coating for accelerated pad seating and optimal performance immediately after installation.
• G3000 Sport Rotors: Spot-drilled and wide-aperture slotted vented rotors designed to expel heat, gas, and debris while maintaining a flat pad surface.
• Corrosion Protection: Rotors are finished with a Geomet anti-rust coating to maintain appearance and prevent rotor-to-hub seizure.
• Complete Kit: Includes front/rear pads (as specified), two rotors, and high-quality caliper lubricant for a direct-fit installation.
• Manufacturer Part Number: S10KF1215

Fits 2004-2013 Volvo C70, S40, and V50 (T5, 2.4i, and R-Design models). This EBC S10 Brake Pad and Rotor Kit provides a significant performance upgrade over original equipment, engineered specifically for spirited street driving and sport compact applications.

The kit features EBC high-efficiency brake pads formulated with Aramid fiber for superior thermal stability. These pads are fully shimmed, slotted, and chamfered to reduce noise and include EBC’s patented Brake-In coating to ensure rapid pad seating immediately after installation. These are paired with G3000 sport vented rotors featuring wide aperture slots and spot drilling. This design draws cool air into the braking contact zone while effectively clearing dirt, dust, and debris to maintain a flat and parallel pad wear surface throughout the component lifecycle.

• Direct-fit replacement with no modifications required to factory calipers
• G3000 sport rotors with wide aperture slots for improved cooling and debris removal
• Geomet anti-rust coating on rotor surfaces for long-term corrosion resistance
• High-friction Aramid fiber pads for improved stopping power
• Includes high-quality caliper lubricant and necessary hardware
• Manufacturer Part Number: S10KF1214
• 10,000-mile no-hassle manufacturer warranty

The EBC Brakes S10 Brake Pad and Rotor Kit (S10KF1199) provides a significant performance upgrade for street-driven vehicles, offering 15% cost savings over purchasing components separately. Fits select 2004-2019 Audi A3, Volkswagen Beetle, CC, Eos, Golf, GTI, Jetta, and Passat (2.0T / 1.8T).

This kit replaces worn OE components with high-efficiency EBC pads built from Aramid fiber. To ensure a quiet and smooth installation, the pads are fully shimmed, slotted, and chamfered, featuring the patented Brake-in coating for rapid pad seating. These are paired with G3000 sport vented rotors, which utilize wide-aperture slots and spot drilling to draw cool air into the braking area while clearing dirt, dust, and debris. This design ensures rotors maintain a flat and parallel surface for consistent pad wear.

• High-Efficiency Pads: Aramid fiber construction for improved thermal stability and reliable stopping power.
• Sport Vented Rotors: G3000 cast iron with wide-aperture slots and spot drilling for superior cooling.
• Corrosion Resistance: Finished with a Geomet anti-rust coating to maintain appearance and durability.
• Complete Installation: Includes pads, rotors, and high-quality caliper lubricant for a direct-fit setup.

• Manufacturer Part Number: S10KF1199
• Rotor Material: G3000 Cast Iron
• Pad Material: Aramid Fiber
• Coating: Geomet Anti-Rust
• Warranty: 10,000 Mile No-Hassle Warranty

Fits select 2005-2019 Audi A3 and Volkswagen Beetle, Golf, Golf R, Jetta, and Rabbit (1.8T / 2.0T). This EBC Brakes S10 Sport Upgrade Kit is a direct-fit performance solution designed to replace your factory braking system with increased stopping power and better thermal management. Perfect for spirited driving and sport compacts, this kit provides a significant improvement over OE components without requiring any vehicle modifications.

The kit features high-efficiency EBC brake pads formulated with Aramid fiber for superior friction. Each pad is fully shimmed, slotted, and chamfered to reduce noise, and finished with the EBC patented Brake-in coating to ensure rapid pad seating immediately after installation. These are paired with wide-aperture slotted G3000 sport rotors. The unique slot design draws cool air under the contact area while efficiently clearing dust, dirt, and debris for consistent pedal feel and parallel pad wear.

• Includes high-efficiency Aramid fiber brake pads and G3000 sport vented rotors
• Geomet anti-rust coating on rotors for long-lasting corrosion resistance
• Wide aperture slots and spot drilling for cooler braking temperatures
• Patented Brake-in coating for fast pad-to-rotor bedding
• Direct fit replacement for factory braking systems
• Manufacturer Part Number: S10KF1198
• Warranty: 10,000-mile no-hassle manufacturer warranty

Fits select 2000-2006 Audi TT, Volkswagen Golf, and Jetta (1.8T). Please refer to the fitment table for specific submodel compatibility.

The EBC Brakes S10 Brake Pad and Rotor Kit (MPN: S10KF1148) is a comprehensive upgrade designed to improve stopping power and thermal management over original equipment. This kit combines high-efficiency EBC pads with wide-aperture slotted sport rotors to provide a significant improvement in braking performance for spirited driving and street use. By packaging these components together, this kit offers a 15% cost savings over purchasing pads and rotors separately.

• High-Efficiency Pads: Formulated with Aramid fiber for superior friction; fully shimmed, slotted, and chamfered to reduce noise and vibration.
• Brake-In Coating: Features EBC's patented coating for accelerated pad seating and immediate performance after installation.
• G3000 Sport Rotors: Wide-aperture slotted and spot-drilled vented rotors draw cool air into the braking zone while clearing dirt, dust, and debris.
• Geomet Protection: Rotors are finished with a Geomet anti-rust coating to maintain a clean appearance and prevent corrosion on non-friction surfaces.
• Complete Hardware: Includes high-friction pads, front and rear rotors, and caliper lubricant for a direct-fit installation.
• Warranty: Covered by a 10,000-mile manufacturer no-hassle warranty.

Fits select 1999-2010 Volkswagen Beetle, Golf, and Jetta (1.8T). This EBC S10 Brake Pad and Rotor Kit is an engineered street upgrade designed for drivers seeking improved stopping power and thermal management over standard OE components. By bundling high-friction pads with performance rotors, this kit provides a direct-fit solution that enhances braking consistency for spirited driving and daily commuting.

The included high-efficiency EBC pads are constructed from a premium aramid fiber compound. These pads are fully shimmed, slotted, and chamfered to reduce noise and vibration. They feature the patented EBC Brake-in red surface coating, which accelerates the pad seating process immediately after installation. Paired with these are the G3000 sport vented rotors, featuring wide aperture slots and spot drilling. This design actively draws cool air across the friction surface and effectively clears dust, dirt, and gases for cooler operation and parallel pad wear.

• Complete kit includes EBC pads, G3000 sport rotors, and caliper lubricant
• Aramid fiber pads provide a significant increase in friction over stock
• Wide aperture slotted rotors improve cooling and debris removal
• Geomet anti-rust coating protects non-friction surfaces from corrosion
• 10,000-mile no-hassle manufacturer warranty
• Manufacturer Part Number: S10KF1147

Fits 2000-2005 Toyota Celica (GT/GTS) and 2005-2010 Scion tC (Base/Spec).

The EBC S10 Brake Pad and Rotor Kit (MPN: S10KF1144) is a direct-fit performance upgrade engineered for spirited street driving. This kit pairs EBC Greenstuff aramid fiber pads with wide-aperture slotted rotors to deliver significantly better stopping power and thermal management than original equipment components.

• High-Efficiency Greenstuff Pads: Formulated with aramid fibers and featuring a fully shimmed, slotted, and chamfered design to reduce noise and improve friction.
• Brake-In™ Surface Coating: Includes EBC's patented coating to ensure rapid pad-to-rotor seating immediately after installation.
• G3000 Sport Rotors: Precision-cast vented rotors with wide-aperture slots that draw cool air into the contact zone while clearing dust, dirt, and gases.
• Geomet Anti-Rust Finish: A protective coating applied to the rotors to prevent corrosion and maintain a clean appearance.
• Serviceable Design: Engineered to maintain a perfectly flat and parallel pad wear profile throughout the life of the kit.
• Installation: Direct bolt-on setup requiring no modifications to the factory braking system; includes caliper lubricant.
• Warranty: Includes a 10,000-mile manufacturer no-hassle warranty.

Fits select 2002-2011 Acura RSX and Honda Civic (Base, Type-S, Si, EX, LX, DX, GX, Hybrid).

The EBC S10 Brake Pad and Rotor Kit (S10KF1127) provides a comprehensive performance upgrade for street-driven SUVs, compacts, and light trucks. This direct-fit kit replaces your factory components with matched high-efficiency pads and G3000 sport rotors, designed to deliver a significant improvement in stopping power and thermal management compared to OE setups.

• High-efficiency Aramid fiber pads are fully shimmed, slotted, and chamfered for quiet, consistent operation.
• Patented EBC Brake-in coating ensures rapid pad seating immediately after installation.
• Wide-aperture slotted and spot-drilled G3000 sport rotors draw in cool air and effectively eject dust and debris.
• Geomet anti-rust finish maintains a clean look and prevents corrosion on non-contact rotor surfaces.
• Direct-fit design requires no modifications to factory calipers or mounting points.
• Includes high-performance pads, vented sport rotors, and caliper lubricant.
• Manufacturer Part Number: S10KF1127.
• Backed by a 10,000-mile no-hassle warranty.

Fits select 1993-2010 Lexus GS300, GS400, GS430, IS300, and SC430. See the fitment table below for full compatibility.

The EBC Brakes S10 Brake Pad and Rotor Kit (MPN: S10KF1111) provides a significant improvement in braking performance over original equipment. This direct-fit upgrade combines high-efficiency Aramid fiber pads with wide-aperture slotted G3000 sport rotors, engineered to reduce braking temperatures and maintain a clean contact surface. The rotors feature a Geomet anti-rust coating to prevent corrosion on non-contact surfaces, while the pads utilize EBC’s patented Brake-in coating for rapid seating and immediate stopping power following installation.

• Aramid Fiber Pads: Fully shimmed, slotted, and chamfered to reduce noise and vibration.
• G3000 Sport Rotors: Vented and wide-aperture slotted design for cooler operation and debris removal.
• Corrosion Protection: Geomet anti-rust finish ensures the rotors remain clean and functional.
• Brake-in Technology: Specialized coating ensures the pads bed to the rotors quickly for peak performance.
• Complete Set: Includes front/rear pads and rotors as specified for the vehicle application, plus high-performance caliper lube.

Fits select 2012-2017 Buick Regal and 2015 Chevrolet Camaro models.

The EBC Brakes S10 Pad and Rotor Kit (S10KF1104) is a comprehensive brake upgrade designed to deliver a significant improvement in stopping power over factory equipment. This matched set includes high-efficiency pads and sport-vented rotors, providing a direct-fit solution for drivers seeking better thermal management and more consistent pedal feel during spirited driving. By bundling these components, this kit ensures optimal pad-to-rotor compatibility and simplified installation.

The included high-efficiency pads are constructed from aramid fiber and come fully shimmed, slotted, and chamfered to minimize noise and vibration. They feature EBC's patented Brake-in coating to accelerate the bedding-in process. Paired with these are wide-aperture slotted G3000 sport rotors, which are spot-drilled and vented to draw cool air into the braking area while effectively clearing dust and debris. Each rotor is finished with a Geomet anti-rust coating to maintain a clean appearance and resist corrosion.

• Direct-fit upgrade with no modifications required over the stock setup
• G3000 sport rotors with wide-aperture slots and spot drilling for cooler operation
• Aramid fiber brake pads for improved friction and reduced fade
• Geomet anti-rust coating on rotors for long-lasting corrosion resistance
• Patented EBC Brake-in coating for rapid pad seating after installation
• Includes pads, rotors, and caliper lubricant
• Manufacturer Part Number: S10KF1104

Fits 2003-2007 Volvo S60 and V70 models (2.4T / 2.5T). This EBC S10 Brake Pad and Rotor Kit is an ideal upgrade for sport compacts and spirited daily drivers looking for a significant improvement over factory braking performance.

The kit features EBC aramid fiber brake pads that are fully shimmed, slotted, and chamfered to reduce noise and vibration. These pads include the patented Brake-in coating for rapid bed-in immediately after installation. Paired with wide-aperture slotted G3000 sport rotors, this combination maintains cooler operating temperatures and ensures flat, parallel pad wear throughout the life of the components. The rotors are finished with a Geomet anti-rust coating to prevent corrosion on non-contact surfaces.

• Significant braking improvement over OE pads and rotors
• Wide aperture slots draw cool air into the braking zone and eject dust and debris
• G3000 sport rotors provide superior heat dissipation
• Aramid fiber pads with Brake-in coating for fast seating
• Geomet anti-rust finish for long-lasting appearance
• Direct fit installation with no modifications required
• Includes brake pads, sport rotors, and caliper lubricant
• Manufacturer Part Number: S10KF1102
• 10,000-mile no-hassle warranty

Fits 1989-1996 Nissan 300ZX (2+2, Base, and Turbo models).

The EBC Brakes S10 Sport Kit is a performance-oriented upgrade designed for 1989-1996 Nissan 300ZX owners looking for improved thermal management and stopping power over factory components. This comprehensive kit bundles high-efficiency EBC pads with wide-aperture G3000 sport rotors, providing a 15% cost savings compared to purchasing the components separately.

The included pads are constructed from a high-friction Aramid fiber compound, featuring a patented Brake-in™ coating for rapid bedding and instant performance after installation. These pads are fully shimmed, slotted, and chamfered to minimize vibration and noise. Paired with G3000 sport vented rotors, this kit utilizes wide-aperture slots and spot drilling to pull cool air into the braking zone while effectively venting dust, gases, and debris. Each rotor is finished with a Geomet anti-rust coating to ensure long-term corrosion resistance and a clean aesthetic through the wheel spokes.

• Direct-fit upgrade for factory braking systems
• Aramid fiber brake pads for high-efficiency stopping
• G3000 cast iron sport rotors with wide aperture slots for cooling
• Geomet anti-rust coating on rotor surfaces
• Includes EBC pads, sport rotors, and caliper lubricant
• Manufacturer Part Number: S10KF1099
• Warranty: 10,000-mile no-hassle manufacturer warranty

Fits 1994-2005 Mazda Miata (Base, LS, M Edition, Mazdaspeed, SE, Shinsen, and STO).

The EBC S10 Brake Pad and Rotor Kit (S10KF1002) is a comprehensive performance upgrade designed for spirited driving and improved thermal management. This direct-fit kit replaces your factory components with matched high-efficiency pads and sport rotors, offering a significant improvement in braking feel and consistency over OE equipment. The pads are constructed from a premium Aramid fiber compound, fully shimmed, slotted, and chamfered to ensure quiet operation. They feature EBC’s patented Brake-In coating, which facilitates rapid pad seating immediately after installation.

To complement the pads, the kit includes G3000 sport vented rotors featuring wide-aperture slots and spot drilling. This design actively draws cool air into the braking zone while effectively venting dust, dirt, and debris. Every rotor is finished with a Geomet anti-rust coating to maintain a clean appearance and prevent corrosion on non-friction surfaces.

• Manufacturer Part Number: S10KF1002
• Rotor Type: Wide-Aperture Slotted and Spot-Drilled G3000 Sport Rotors
• Rotor Finish: Geomet Anti-Rust Coating
• Pad Material: High-Efficiency Aramid Fiber
• Installation: Direct fit, no modifications required
• Included Hardware: Brake pads, rotors, and caliper lubricant
• Warranty: 10,000-mile no-hassle manufacturer warranty

Fits 2003-2008 Mitsubishi Lancer Evolution (GSR, MR, RS, and SE).

EBC Brakes GD Sport rotors are engineered for high-performance street and track use, providing superior cooling and gas venting compared to standard solid discs. These rotors feature wide-aperture slots that draw cool air into the braking zone, significantly reducing temperatures and preventing brake fade under heavy load. The blind-drilled dimples provide an escape path for brake dust and debris without the structural integrity risks associated with through-drilled rotors.

Constructed from high-quality G3000 grey cast iron, these rotors are precision-machined to exacting tolerances. To ensure long-term durability and aesthetics, GD Sport rotors for import applications are finished with a gold anodized zinc coating, protecting the non-contact surfaces from corrosion and oxidation.

• Enhanced Cooling: Wide slots help brakes run cooler and reduce thermal fade.
• Dimpled Design: Degasses the pad surface and removes debris without the cracking risk of cross-drilling.
• Premium Material: Cast from OE-spec grey iron for optimal ductility and tensile strength.
• Corrosion Protection: Gold anodized finish maintains appearance and prevents rust.
• Performance Verified: 100% tested for runout and structural integrity.
• Manufacturer Part Number: GD996

Fits select 2003-2008 Mitsubishi Lancer Evolution models, including GSR, MR, RS, and SE trims.

EBC GD Series Sport rotors are engineered to provide superior cooling and gas venting for high-performance street and track use. These rotors feature wide-aperture slots that draw cool air under the brake pad contact patch while expelling dust, dirt, and hot gases. Unlike traditional cross-drilled rotors which can develop stress cracks under heavy thermal loads, the GD Series uses blind-drilled dimples to maintain structural integrity while providing essential degassing.

Precision-cast from OE-spec G3000 grey iron, these rotors are manufactured primarily in EBC's own UK foundry. Each rotor is tested for grain structure, tensile strength, and hardness before being balanced to eliminate runout. The gold anodized finish provides a layer of corrosion protection for the hub and internal vanes, ensuring a long-lasting professional appearance.

• Wide aperture slots help brakes run cooler and reduce brake fade
• Dimpled design provides venting without the risk of rotor cracking
• Constructed from high-quality grey cast iron for maximum durability
• Gold anodized finish protects against corrosion in non-contact zones
• Direct replacement for factory front rotors
• Manufacturer Part Number: GD975

Fits select 1991-2001 Acura Integra, Legend, RL, TL, Honda CR-V, Odyssey, Prelude, and Isuzu Oasis.

EBC GD Sport rotors are designed for high-performance braking in demanding conditions. These rotors are cast from high-quality OE-spec grey iron and features a unique wide-slotted and dimpled pattern. Unlike drilled rotors, the blind-drilled dimples maintain structural integrity while providing an escape path for brake gases. The wide slots actively draw cool air under the pad surface and sweep away dust, dirt, and debris to maintain a clean contact patch and reduce brake fade under heavy load or high-speed driving.

• Gold anodized finish provides corrosion resistance and is specifically designated for import applications
• Wide-aperture slots help the braking system run cooler by up to 200 degrees
• Blind-drilled dimples prevent stress cracking common in through-drilled rotors
• Precision tested for grain structure, tensile strength, and runout for consistent performance
• Ideal for performance sedans, SUVs, and towing applications
• Manufacturer Part Number: GD946

Fits 2000-2006 Audi TT Quattro and 2003-2005 Volkswagen Golf and Jetta (1.8T).

Upgrade your vehicle's stopping power and thermal management with EBC GD Series Sport Rotors. These high-performance rear rotors are engineered to solve the common issue of brake fade during spirited driving or under heavy load. The unique dimpled and slotted design provides the degassing benefits of a drilled rotor without the risk of structural stress cracks often found in fully through-drilled components.

Each rotor is precision-machined from high-quality grey cast iron to meet OE specifications. The wide aperture slots pull cool air into the braking zone, significantly reducing temperatures while actively clearing dirt, dust, and debris from the pad surface. For import applications, these rotors feature a gold anodized finish to provide superior corrosion resistance and a clean, performance-oriented look.

• Wide-angle slots draw cool air into the braking area to reduce temperatures
• Dimpled surface allows for effective degassing without sacrificing rotor integrity
• Constructed from high-grade grey cast iron for maximum durability
• Gold anodized finish protects against corrosion in harsh environments
• Direct-fit replacement for factory rear brake rotors
• Manufacturer Part Number: GD931

Fits select 2000-2006 Audi TT, TT Quattro, Volkswagen Golf GTI, and Jetta (1.8T).

EBC GD Sport Series rotors are engineered for high-performance braking, featuring wide-aperture slots and blind-drilled dimples that significantly improve cooling capacity. Unlike traditional cross-drilled rotors, the blind-drilled dimple design prevents the formation of stress cracks while allowing brake gases, dust, and debris to escape the friction zone. These rotors are cast from high-quality OE-spec grey iron, ensuring consistent thermal performance and durability under heavy load or spirited driving conditions.

Designed as a direct replacement for factory units, the GD930 rotors feature a gold anodized finish specifically chosen for import applications to protect against corrosion. The wide-slot design effectively sweeps away water and debris, maintaining a clean pad-to-rotor contact patch and reducing brake fade during towing, hauling, or high-speed maneuvers.

• Precision cast from OE-spec grey iron for maximum durability and thermal stability
• Wide-aperture slots promote airflow and expel gasses and debris from the braking zone
• Blind-drilled dimples provide cooling benefits without the risk of stress cracking
• Gold anodized finish for superior corrosion resistance and a performance aesthetic
• Proven to reduce brake fade and improve pad degasing under load
• Manufacturer Part Number: GD930

Fits select 1996-2012 Mercedes-Benz C-Class, CLK, E-Class, and SLK models.

EBC Brakes GD Sport series rotors are engineered to solve the heat and debris issues that plague factory braking systems. These rotors feature wide aperture slots that pull cool air into the braking zone while effectively venting dirt, dust, and gases to maintain consistent pad contact. The dimpled design provides the thermal benefits of cross-drilling without sacrificing structural integrity, significantly reducing the risk of stress cracks under high-performance use.

• Precision Construction: Cast from OE-spec grey iron for optimal tensile strength, hardness, and ductility.
• Superior Cooling: Wide-slotted design helps brakes run cooler and reduces brake fade during spirited driving or under load.
• Corrosion Resistance: Gold anodized finish protects non-contact surfaces from rust and provides a premium look for import vehicles.
• Quality Assured: Every rotor undergoes element analysis, grain structure testing, and 100% runout inspection to ensure a perfect installation.
• Part Number: GD892
• Placement: Rear Axle

Fits 1997-2003 BMW 525i and 528i Base models.

EBC Brakes GD Sport Series (3GD) rotors provide a significant performance upgrade for the E39 chassis. These rotors are engineered with a wide-aperture slotted and dimpled design that draws cool air under the brake pad surface, effectively reducing operating temperatures and preventing brake fade. Unlike traditional cross-drilled rotors, the dimpled surface allows for efficient pad degassing and debris removal without the risk of "fire-cracking" caused by through-drilling.

Every GD Sport rotor is cast from high-quality grey iron and precision-machined to exacting tolerances. EBC subjects these rotors to rigorous element analysis, hardness testing, and tensile strength verification. Each unit is tested for runout and balanced to ensure a smooth, vibration-free installation that restores and improves your BMW's braking performance.

• Slotted and dimpled design for superior cooling and pad degassing
• Wide-aperture slots pull cool air under the friction material
• Cast from OE-spec G3000 grey iron for maximum thermal stability
• Precision-machined and tested for perfect runout and balance
• Gold-colored anti-corrosion coating on non-friction surfaces
• Direct replacement for factory front brake rotors
• Manufacturer Part Number: GD858

Fits select 1990-2014 Acura Integra, Honda Civic, Civic del Sol, Fit, and Insight models. These EBC Brakes GD Sport series rotors are engineered for drivers seeking improved thermal management and consistent stopping power during spirited driving or under heavy load.

Constructed from high-quality OE-spec grey cast iron, these rotors undergo rigorous testing for grain structure, tensile strength, and hardness. The GD series features a unique wide-aperture slot design that draws cool air into the braking zone, significantly reducing operating temperatures to prevent brake fade. The blind-drilled dimples provide an escape route for brake pad gases and debris without the risk of stress cracking associated with through-drilled holes. Finished with a gold anodized coating, these rotors offer excellent corrosion resistance for import applications while maintaining a professional aesthetic behind the wheels.

• Manufacturer Part Number: GD850
• Placement: Front Axle
• Design: Dimpled and wide-slotted for maximum cooling and degassing
• Material: Precision-cast grey iron for high-friction stability
• Finish: Gold anodized for superior corrosion protection
• Solves brake fade and removes dirt/dust from the contact patch
• Tested 100% piece-by-piece for runout and structural integrity

Fits select 1999-2010 Volkswagen Beetle, Golf, and Jetta (1.8T).

Upgrade your vehicle's braking performance with EBC Brakes GD Sport Series rotors. These front rotors feature a unique dimpled and slotted design that provides the cooling and degassing benefits of a drilled rotor without the risk of stress cracks. The wide-aperture slots pull cool air into the braking zone, significantly reducing temperatures and helping to eliminate brake fade under heavy load or high-speed use. These slots also effectively clear dirt, dust, and debris from the pad contact area for more consistent braking response.

Each rotor is cast from high-quality OE-spec grey iron to ensure durability and thermal stability. To protect against corrosion and maintain a premium look, these rotors are finished with a gold anodized coating, specifically designed to complement the aesthetics of import vehicles. Every GD Series rotor is rigorously tested for tensile strength, grain structure, and hardness, then 100% inspected for runout to ensure a perfect installation.

• Manufacturer Part Number: GD818
• Placement: Front
• Surface Style: Dimpled and Wide-Slotted
• Material: OE Spec G3000 Grey Cast Iron
• Finish: Gold Anodized Corrosion Protection
• Design: Vented for improved heat dissipation

Fits select 1998-2016 Aprilia, Audi, and Volkswagen models (1.8T).

EBC GD Sport Series rotors are engineered for drivers seeking improved braking performance and superior heat management. These rear rotors feature a signature dimpled and slotted pattern that effectively clears dust, gases, and debris from the braking zone. This design ensures consistent pad contact and significantly reduces brake fade under heavy loads or at high speeds, making them an ideal upgrade for performance sedans or utility applications.

• High-Quality Construction: Cast from OE-spec grey iron for maximum durability and thermal stability.
• Advanced Cooling: Wide aperture slots pull cool air into the braking area, reducing operating temperatures and preventing thermal glazing.
• Integrity-Focused Design: Dimpled apertures provide degassing benefits similar to cross-drilling without the risk of stress cracks.
• Corrosion Protection: Gold anodized finish protects against oxidation, specifically tailored for import vehicle aesthetics and longevity.
• Precision Tested: Every rotor is tested for element analysis, grain structure, and tensile strength to ensure perfect runout.

Manufacturer Part Number: GD816