Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Welcome to Atlus Automotive
Main menu
-
Performance
- Performance
-
Intake & Exhaust
- Intake & Exhaust
- Air Intake Systems
- Cold Air Intakes
- Air Intake Components
- Air Filters
- Air Filters - Drop In
- Air Filters - Direct Fit
- Air Filters - Universal Fit
- Pre-Filters
- Recharge Kits
- OE Replacement Air Intake Components
- Exhaust, Mufflers & Tips
- Catback
- Axle Back
- Muffler
- Tips
- Headers & Manifolds
- Connecting Pipes
- Catalytic Converter Direct Fit
- Catalytic Converter Universal
- Exhaust Collector
- Merge Collectors
-
Engine Upgrades
- Engine Upgrades
- Engine Components
- Camshafts
- Valve Springs, Retainers
- Head Gaskets
- Head Stud & Bolt Kits
- Main Stud & Bolt Kits
- Gasket Kits
- Engine Mounts
- Oil Catch Cans
- Oil Separators
- Throttle Bodies
- Throttle Body Spacers
- Crankshaft Dampers
- Valves
- Piston Rings
- Piston Sets - Forged - 4cyl
- Piston Sets - Cast - 4cyl
- Connecting Rods - 4Cyl
- Rotating Assemblies
- Stroker Kits
-
Turbo & Cooling
-
Fuel, Ignition & Tuning
-
Suspension & Handling
- Suspension & Handling
-
Lowering & Coilovers
-
Arms, Links & Alignment
-
Lift & Off-Road Suspension
-
Chassis & Bracing
-
Wheels & Tires
- Wheels & Tires
-
Wheels
-
Tires
-
Drivetrain & Clutch
-
Brakes
- Brakes
-
Pads & Rotors
-
Brake Kits & Calipers
-
Lines, Fluid & Hardware
-
Exterior & Lighting
- Exterior & Lighting
-
Lighting
-
Exterior Styling
-
Bumpers & Protection
-
Interior & Electronics
- Interior & Electronics
-
Interior Upgrades
-
Gauges & Electronics
-
Audio & Safety
-
Overland & Utility
- Overland & Utility
-
Bed Covers & Bed Gear
-
Steps, Racks & Storage
-
Trail & Towing
-
Maintenance & Garage
- Maintenance & Garage
-
Oil, Fluids & Filters
-
Detailing & Car Care
-
Tools & Fabrication
Your cart
Choose your Location
-
Atlus
1340 Cobb Dr, Unit 1, Eustis, FL 32736
352-234-4458
Mon – Fri: 8:30 am – 4:30 pm
Sat: 9:00 am – 2:00 pm
Sun: Closed
Product Comparison
How they are Different
|
__ __ |
|
|---|---|
| Description |
Description - __ |
| Rating |
Rating - __ |
| Vendor |
Vendor - __ |
| Color |
Color - __ |
|
|
Compare products ( / )
1048 products
1048 products
Sort by:
- Featured
- Most relevant
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
$309.72
Power Stop drilled and slotted rotors provide a bolt-on upgrade for improved brake cooling and performance. Precision cross-drilled for maximum cooling and maximum performance during extreme conditions; rounded slots sweep away gasses, dust, and moisture to keep a clean friction contact patch on the rotor surface. Silver zinc dichromate plating resists rust and corrosion. With a direct OE fit, there are no special modifications needed.
- Manufactured to strict tolerances for DTV and runout for smooth quiet performance
- Precision cross-drilled for maximum cooling and optimum performance
- Chamfered drill holes and rounded slots to minimize stress cracking
- Bolt-on upgrade for stock brakes, no modifications necessary
- Slotted friction surface sweeps away gasses, dust, and water
- Weight and vane count match original equipment design
- Zinc plated for protection against corrosion
- 100% dynamic mill balanced
- Sold as a pair
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2009-2010 | Ford | F-250 Super Duty | Cabela's |
| 2008-2009 | Ford | F-250 Super Duty | FX4 |
| 2005-2010 | Ford | F-250 Super Duty | Harley-Davidson Edition |
| 2005-2012 | Ford | F-250 Super Duty | King Ranch |
| 2005-2012 | Ford | F-250 Super Duty | Lariat |
| 2005-2012 | Ford | F-250 Super Duty | XL |
| 2005-2012 | Ford | F-250 Super Duty | XLT |
| 2009-2010 | Ford | F-350 Super Duty | Cabela's |
| 2008-2009 | Ford | F-350 Super Duty | FX4 |
| 2005-2010 | Ford | F-350 Super Duty | Harley-Davidson Edition |
| 2005-2012 | Ford | F-350 Super Duty | King Ranch |
| 2005-2012 | Ford | F-350 Super Duty | Lariat |
| 2005-2012 | Ford | F-350 Super Duty | XL |
| 2005-2012 | Ford | F-350 Super Duty | XLT |
$154.86
$220.52
$441.04
Power Stop drilled and slotted rotors provide a bolt-on upgrade for improved brake cooling and performance. Precision cross-drilled for maximum cooling and maximum performance during extreme conditions; rounded slots sweep away gasses, dust, and moisture to keep a clean friction contact patch on the rotor surface. Silver zinc dichromate plating resists rust and corrosion. With a direct OE fit, there are no special modifications needed.
- Manufactured to strict tolerances for DTV and runout for smooth quiet performance
- Precision cross-drilled for maximum cooling and optimum performance
- Chamfered drill holes and rounded slots to minimize stress cracking
- Bolt-on upgrade for stock brakes, no modifications necessary
- Slotted friction surface sweeps away gasses, dust, and water
- Weight and vane count match original equipment design
- Zinc plated for protection against corrosion
- 100% dynamic mill balanced
- Sold as a pair
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2009-2010 | Dodge | Ram 2500 | Laramie |
| 2009-2010 | Dodge | Ram 2500 | Power Wagon |
| 2009-2010 | Dodge | Ram 2500 | SLT |
| 2009-2010 | Dodge | Ram 2500 | ST |
| 2009-2010 | Dodge | Ram 2500 | SXT |
| 2010 | Dodge | Ram 2500 | TRX |
| 2009-2010 | Dodge | Ram 3500 | Laramie |
| 2009-2010 | Dodge | Ram 3500 | SLT |
| 2009-2010 | Dodge | Ram 3500 | ST |
| 2009 | Dodge | Ram 3500 | SXT |
| 2013-2025 | Ram | 2500 | Big Horn |
| 2011-2025 | Ram | 2500 | Laramie |
| 2014-2015 | Ram | 2500 | Laramie Limited |
| 2011-2021 | Ram | 2500 | Laramie Longhorn |
| 2016-2025 | Ram | 2500 | Limited |
| 2021-2025 | Ram | 2500 | Limited Longhorn |
| 2013-2015,2019-2025 | Ram | 2500 | Lone Star |
| 2012-2016 | Ram | 2500 | Outdoorsman |
| 2011-2025 | Ram | 2500 | Power Wagon |
| 2023-2025 | Ram | 2500 | Rebel |
| 2011-2018 | Ram | 2500 | SLT |
| 2024-2025 | Ram | 2500 | Special Service |
| 2011-2013 | Ram | 2500 | ST |
| 2013-2025 | Ram | 2500 | Tradesman |
| 2013-2025 | Ram | 3500 | Big Horn |
| 2011-2025 | Ram | 3500 | Laramie |
| 2014-2015 | Ram | 3500 | Laramie Limited |
| 2011-2020 | Ram | 3500 | Laramie Longhorn |
| 2016-2025 | Ram | 3500 | Limited |
| 2021-2025 | Ram | 3500 | Limited Longhorn |
| 2013-2015,2017,2019-2022 | Ram | 3500 | Lone Star |
| 2011-2024 | Ram | 3500 | SLT |
| 2024-2025 | Ram | 3500 | Special Service |
| 2011-2013 | Ram | 3500 | ST |
| 2013-2025 | Ram | 3500 | Tradesman |
$220.52
$209.35
$418.70
Power Stop drilled and slotted rotors provide a bolt-on upgrade for improved brake cooling and performance. Precision cross-drilled for maximum cooling and maximum performance during extreme conditions; rounded slots sweep away gasses, dust, and moisture to keep a clean friction contact patch on the rotor surface. Silver zinc dichromate plating resists rust and corrosion. With a direct OE fit, there are no special modifications needed.
- Manufactured to strict tolerances for DTV and runout for smooth quiet performance
- Precision cross-drilled for maximum cooling and optimum performance
- Chamfered drill holes and rounded slots to minimize stress cracking
- Bolt-on upgrade for stock brakes, no modifications necessary
- Slotted friction surface sweeps away gasses, dust, and water
- Weight and vane count match original equipment design
- Zinc plated for protection against corrosion
- 100% dynamic mill balanced
- Sold as a pair
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2009-2010 | Dodge | Ram 2500 | Laramie |
| 2009-2010 | Dodge | Ram 2500 | Power Wagon |
| 2009-2010 | Dodge | Ram 2500 | SLT |
| 2009-2010 | Dodge | Ram 2500 | ST |
| 2009-2010 | Dodge | Ram 2500 | SXT |
| 2010 | Dodge | Ram 2500 | TRX |
| 2009-2010 | Dodge | Ram 3500 | Laramie |
| 2009-2010 | Dodge | Ram 3500 | SLT |
| 2009-2010 | Dodge | Ram 3500 | ST |
| 2009 | Dodge | Ram 3500 | SXT |
| 2013-2025 | Ram | 2500 | Big Horn |
| 2011-2025 | Ram | 2500 | Laramie |
| 2014-2015 | Ram | 2500 | Laramie Limited |
| 2011-2021 | Ram | 2500 | Laramie Longhorn |
| 2016-2025 | Ram | 2500 | Limited |
| 2021-2025 | Ram | 2500 | Limited Longhorn |
| 2013-2015,2019-2025 | Ram | 2500 | Lone Star |
| 2012-2016 | Ram | 2500 | Outdoorsman |
| 2011-2025 | Ram | 2500 | Power Wagon |
| 2023-2025 | Ram | 2500 | Rebel |
| 2011-2018 | Ram | 2500 | SLT |
| 2024-2025 | Ram | 2500 | Special Service |
| 2011-2013 | Ram | 2500 | ST |
| 2013-2025 | Ram | 2500 | Tradesman |
| 2013-2025 | Ram | 3500 | Big Horn |
| 2011-2025 | Ram | 3500 | Laramie |
| 2014-2015 | Ram | 3500 | Laramie Limited |
| 2011-2020 | Ram | 3500 | Laramie Longhorn |
| 2016-2025 | Ram | 3500 | Limited |
| 2021-2025 | Ram | 3500 | Limited Longhorn |
| 2013-2015,2017,2019-2022 | Ram | 3500 | Lone Star |
| 2011-2024 | Ram | 3500 | SLT |
| 2024-2025 | Ram | 3500 | Special Service |
| 2011-2013 | Ram | 3500 | ST |
| 2013-2025 | Ram | 3500 | Tradesman |
$209.35
$130.26
Power Stop drilled and slotted rotors provide a bolt-on upgrade for improved brake cooling and performance. Precision cross-drilled for maximum cooling and maximum performance during extreme conditions; rounded slots sweep away gasses, dust, and moisture to keep a clean friction contact patch on the rotor surface. Silver zinc dichromate plating resists rust and corrosion. With a direct OE fit, there are no special modifications needed.
- Manufactured to strict tolerances for DTV and runout for smooth quiet performance
- Precision cross-drilled for maximum cooling and optimum performance
- Chamfered drill holes and rounded slots to minimize stress cracking
- Bolt-on upgrade for stock brakes, no modifications necessary
- Slotted friction surface sweeps away gasses, dust, and water
- Weight and vane count match original equipment design
- Zinc plated for protection against corrosion
- 100% dynamic mill balanced
- Sold as a pair
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2009 | Chrysler | PT Cruiser | Base |
| 2010 | Chrysler | PT Cruiser | Classic |
| 2010 | Chrysler | PT Cruiser | Couture Edition |
| 2003-2007 | Chrysler | PT Cruiser | GT |
| 2009 | Chrysler | PT Cruiser | Limited |
| 2009 | Chrysler | PT Cruiser | LX |
| 2009 | Chrysler | PT Cruiser | Touring |
| 2003 | Dodge | Neon | R/T |
| 2003 | Dodge | Neon | SE |
| 2003-2005 | Dodge | Neon | SRT-4 |
| 2003 | Dodge | Neon | SXT |
$174.88
Power Stop drilled and slotted rotors provide a bolt-on upgrade for improved brake cooling and performance. Precision cross-drilled for maximum cooling and maximum performance during extreme conditions; rounded slots sweep away gasses, dust, and moisture to keep a clean friction contact patch on the rotor surface. Silver zinc dichromate plating resists rust and corrosion. With a direct OE fit, there are no special modifications needed.
- Manufactured to strict tolerances for DTV and runout for smooth quiet performance
- Precision cross-drilled for maximum cooling and optimum performance
- Chamfered drill holes and rounded slots to minimize stress cracking
- Bolt-on upgrade for stock brakes, no modifications necessary
- Slotted friction surface sweeps away gasses, dust, and water
- Weight and vane count match original equipment design
- Zinc plated for protection against corrosion
- 100% dynamic mill balanced
- Sold as a pair
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2008 | Chrysler | PT Cruiser | Base |
| 2005 | Chrysler | PT Cruiser | Dream Cruiser |
| 2003-2007 | Chrysler | PT Cruiser | GT |
| 2004-2005,2008-2009 | Chrysler | PT Cruiser | Limited |
| 2005 | Chrysler | PT Cruiser | Street Cruiser |
| 2004-2005,2008-2009 | Chrysler | PT Cruiser | Touring |
| 2003 | Dodge | Neon | R/T |
| 2003 | Dodge | Neon | SE |
| 2003-2005 | Dodge | Neon | SRT-4 |
| 2003 | Dodge | Neon | SXT |
$546.95
$1,093.90
Power Stop drilled and slotted rotors provide a bolt-on upgrade for improved brake cooling and performance. Precision cross-drilled for maximum cooling and maximum performance during extreme conditions; rounded slots sweep away gasses, dust, and moisture to keep a clean friction contact patch on the rotor surface. Silver zinc dichromate plating resists rust and corrosion. With a direct OE fit, there are no special modifications needed.
- Manufactured to strict tolerances for DTV and runout for smooth quiet performance
- Precision cross-drilled for maximum cooling and optimum performance
- Chamfered drill holes and rounded slots to minimize stress cracking
- Bolt-on upgrade for stock brakes, no modifications necessary
- Slotted friction surface sweeps away gasses, dust, and water
- Weight and vane count match original equipment design
- Zinc plated for protection against corrosion
- 100% dynamic mill balanced
- Sold as a pair
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2018 | Dodge | Challenger | R/T 392 |
| 2018-2020 | Dodge | Challenger | R/T Scat Pack |
| 2019-2020 | Dodge | Challenger | R/T Scat Pack Widebody |
| 2015-2018 | Dodge | Challenger | SRT 392 |
| 2015-2020 | Dodge | Challenger | SRT Hellcat |
| 2019-2020 | Dodge | Challenger | SRT Hellcat Redeye |
| 2019-2020 | Dodge | Challenger | SRT Hellcat Redeye Widebody |
| 2018-2020 | Dodge | Challenger | SRT Hellcat Widebody |
| 2020 | Dodge | Challenger | SRT Super Stock |
| 2017-2018 | Dodge | Challenger | T/A 392 |
| 2017-2018 | Dodge | Charger | Daytona 392 |
| 2019-2020 | Dodge | Charger | Scat Pack |
| 2015-2018 | Dodge | Charger | SRT 392 |
| 2015-2020 | Dodge | Charger | SRT Hellcat |
$546.95
$190.04
$248.25
$496.50
Power Stop drilled and slotted rotors provide a bolt-on upgrade for improved brake cooling and performance. Precision cross-drilled for maximum cooling and maximum performance during extreme conditions; rounded slots sweep away gasses, dust, and moisture to keep a clean friction contact patch on the rotor surface. Silver zinc dichromate plating resists rust and corrosion. With a direct OE fit, there are no special modifications needed.
- Manufactured to strict tolerances for DTV and runout for smooth quiet performance
- Precision cross-drilled for maximum cooling and optimum performance
- Chamfered drill holes and rounded slots to minimize stress cracking
- Bolt-on upgrade for stock brakes, no modifications necessary
- Slotted friction surface sweeps away gasses, dust, and water
- Weight and vane count match original equipment design
- Zinc plated for protection against corrosion
- 100% dynamic mill balanced
- Sold as a pair
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2013-2025 | Ram | 3500 | Big Horn |
| 2013-2025 | Ram | 3500 | Laramie |
| 2014-2015 | Ram | 3500 | Laramie Limited |
| 2013-2020 | Ram | 3500 | Laramie Longhorn |
| 2016-2025 | Ram | 3500 | Limited |
| 2021-2025 | Ram | 3500 | Limited Longhorn |
| 2013-2015,2017,2019-2022 | Ram | 3500 | Lone Star |
| 2013-2024 | Ram | 3500 | SLT |
| 2024-2025 | Ram | 3500 | Special Service |
| 2013 | Ram | 3500 | ST |
| 2013-2025 | Ram | 3500 | Tradesman |
$248.25
$270.16
Power Stop drilled and slotted rotors provide a bolt-on upgrade for improved brake cooling and performance. Precision cross-drilled for maximum cooling and maximum performance during extreme conditions; rounded slots sweep away gasses, dust, and moisture to keep a clean friction contact patch on the rotor surface. Silver zinc dichromate plating resists rust and corrosion. With a direct OE fit, there are no special modifications needed.
- Manufactured to strict tolerances for DTV and runout for smooth quiet performance
- Precision cross-drilled for maximum cooling and optimum performance
- Chamfered drill holes and rounded slots to minimize stress cracking
- Bolt-on upgrade for stock brakes, no modifications necessary
- Slotted friction surface sweeps away gasses, dust, and water
- Weight and vane count match original equipment design
- Zinc plated for protection against corrosion
- 100% dynamic mill balanced
- Sold as a pair
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024 | Chevrolet | Corvette | E-Ray |
| 2020-2024 | Chevrolet | Corvette | Stingray |
| 2023-2024 | Chevrolet | Corvette | Z06 |
$264.29
Power Stop drilled and slotted rotors provide a bolt-on upgrade for improved brake cooling and performance. Precision cross-drilled for maximum cooling and maximum performance during extreme conditions; rounded slots sweep away gasses, dust, and moisture to keep a clean friction contact patch on the rotor surface. Silver zinc dichromate plating resists rust and corrosion. With a direct OE fit, there are no special modifications needed.
- Manufactured to strict tolerances for DTV and runout for smooth quiet performance
- Precision cross-drilled for maximum cooling and optimum performance
- Chamfered drill holes and rounded slots to minimize stress cracking
- Bolt-on upgrade for stock brakes, no modifications necessary
- Slotted friction surface sweeps away gasses, dust, and water
- Weight and vane count match original equipment design
- Zinc plated for protection against corrosion
- 100% dynamic mill balanced
- Sold as a pair
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024 | Chevrolet | Corvette | E-Ray |
| 2020-2024 | Chevrolet | Corvette | Stingray |
| 2023-2024 | Chevrolet | Corvette | Z06 |
$207.91
Power Stop drilled and slotted rotors provide a bolt-on upgrade for improved brake cooling and performance. Precision cross-drilled for maximum cooling and maximum performance during extreme conditions; rounded slots sweep away gasses, dust, and moisture to keep a clean friction contact patch on the rotor surface. Silver zinc dichromate plating resists rust and corrosion. With a direct OE fit, there are no special modifications needed.
- Manufactured to strict tolerances for DTV and runout for smooth quiet performance
- Precision cross-drilled for maximum cooling and optimum performance
- Chamfered drill holes and rounded slots to minimize stress cracking
- Bolt-on upgrade for stock brakes, no modifications necessary
- Slotted friction surface sweeps away gasses, dust, and water
- Weight and vane count match original equipment design
- Zinc plated for protection against corrosion
- 100% dynamic mill balanced
- Sold as a pair
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024 | Chevrolet | Corvette | E-Ray |
| 2020-2024 | Chevrolet | Corvette | Stingray |
| 2023-2024 | Chevrolet | Corvette | Z06 |
$198.06
$396.12
Power Stop drilled and slotted rotors provide a bolt-on upgrade for improved brake cooling and performance. Precision cross-drilled for maximum cooling and maximum performance during extreme conditions; rounded slots sweep away gasses, dust, and moisture to keep a clean friction contact patch on the rotor surface. Silver zinc dichromate plating resists rust and corrosion. With a direct OE fit, there are no special modifications needed.
- Manufactured to strict tolerances for DTV and runout for smooth quiet performance
- Precision cross-drilled for maximum cooling and optimum performance
- Chamfered drill holes and rounded slots to minimize stress cracking
- Bolt-on upgrade for stock brakes, no modifications necessary
- Slotted friction surface sweeps away gasses, dust, and water
- Weight and vane count match original equipment design
- Zinc plated for protection against corrosion
- 100% dynamic mill balanced
- Sold as a pair
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2020-2024 | Chevrolet | Silverado 2500 HD | Custom |
| 2015-2024 | Chevrolet | Silverado 2500 HD | High Country |
| 2011-2024 | Chevrolet | Silverado 2500 HD | LT |
| 2011-2024 | Chevrolet | Silverado 2500 HD | LTZ |
| 2011-2024 | Chevrolet | Silverado 2500 HD | WT |
| 2024 | Chevrolet | Silverado 2500 HD | ZR2 |
| 2015-2024 | Chevrolet | Silverado 3500 HD | High Country |
| 2011-2024 | Chevrolet | Silverado 3500 HD | LT |
| 2011-2024 | Chevrolet | Silverado 3500 HD | LTZ |
| 2011-2024 | Chevrolet | Silverado 3500 HD | WT |
| 2016-2019 | Chevrolet | Suburban 3500 HD | LS |
| 2016-2019 | Chevrolet | Suburban 3500 HD | LT |
| 2020-2024 | GMC | Sierra 2500 HD | AT4 |
| 2024 | GMC | Sierra 2500 HD | AT4X |
| 2015-2021 | GMC | Sierra 2500 HD | Base |
| 2011-2024 | GMC | Sierra 2500 HD | Denali |
| 2024 | GMC | Sierra 2500 HD | Denali Ultimate |
| 2022-2024 | GMC | Sierra 2500 HD | Pro |
| 2011-2024 | GMC | Sierra 2500 HD | SLE |
| 2011-2024 | GMC | Sierra 2500 HD | SLT |
| 2011-2014 | GMC | Sierra 2500 HD | WT |
| 2020-2022 | GMC | Sierra 3500 HD | AT4 |
| 2015-2021 | GMC | Sierra 3500 HD | Base |
| 2011-2022 | GMC | Sierra 3500 HD | Denali |
| 2022 | GMC | Sierra 3500 HD | Pro |
| 2011-2022 | GMC | Sierra 3500 HD | SLE |
| 2011-2022 | GMC | Sierra 3500 HD | SLT |
| 2011-2014 | GMC | Sierra 3500 HD | WT |
$198.06
$202.41
$404.82
Power Stop drilled and slotted rotors provide a bolt-on upgrade for improved brake cooling and performance. Precision cross-drilled for maximum cooling and maximum performance during extreme conditions; rounded slots sweep away gasses, dust, and moisture to keep a clean friction contact patch on the rotor surface. Silver zinc dichromate plating resists rust and corrosion. With a direct OE fit, there are no special modifications needed.
- Manufactured to strict tolerances for DTV and runout for smooth quiet performance
- Precision cross-drilled for maximum cooling and optimum performance
- Chamfered drill holes and rounded slots to minimize stress cracking
- Bolt-on upgrade for stock brakes, no modifications necessary
- Slotted friction surface sweeps away gasses, dust, and water
- Weight and vane count match original equipment design
- Zinc plated for protection against corrosion
- 100% dynamic mill balanced
- Sold as a pair
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2020-2024 | Chevrolet | Silverado 2500 HD | Custom |
| 2015-2024 | Chevrolet | Silverado 2500 HD | High Country |
| 2011-2024 | Chevrolet | Silverado 2500 HD | LT |
| 2011-2024 | Chevrolet | Silverado 2500 HD | LTZ |
| 2011-2024 | Chevrolet | Silverado 2500 HD | WT |
| 2024 | Chevrolet | Silverado 2500 HD | ZR2 |
| 2015-2024 | Chevrolet | Silverado 3500 HD | High Country |
| 2011-2024 | Chevrolet | Silverado 3500 HD | LT |
| 2011-2024 | Chevrolet | Silverado 3500 HD | LTZ |
| 2011-2024 | Chevrolet | Silverado 3500 HD | WT |
| 2016-2019 | Chevrolet | Suburban 3500 HD | LS |
| 2016-2019 | Chevrolet | Suburban 3500 HD | LT |
| 2020-2024 | GMC | Sierra 2500 HD | AT4 |
| 2024 | GMC | Sierra 2500 HD | AT4X |
| 2015-2021 | GMC | Sierra 2500 HD | Base |
| 2011-2024 | GMC | Sierra 2500 HD | Denali |
| 2024 | GMC | Sierra 2500 HD | Denali Ultimate |
| 2022-2024 | GMC | Sierra 2500 HD | Pro |
| 2011-2024 | GMC | Sierra 2500 HD | SLE |
| 2011-2024 | GMC | Sierra 2500 HD | SLT |
| 2011-2014 | GMC | Sierra 2500 HD | WT |
| 2020-2022 | GMC | Sierra 3500 HD | AT4 |
| 2015-2021 | GMC | Sierra 3500 HD | Base |
| 2011-2022 | GMC | Sierra 3500 HD | Denali |
| 2022 | GMC | Sierra 3500 HD | Pro |
| 2011-2022 | GMC | Sierra 3500 HD | SLE |
| 2011-2022 | GMC | Sierra 3500 HD | SLT |
| 2011-2014 | GMC | Sierra 3500 HD | WT |
$202.41
$169.76
Power Stop drilled and slotted rotors provide a bolt-on upgrade for improved brake cooling and performance. Precision cross-drilled for maximum cooling and maximum performance during extreme conditions; rounded slots sweep away gasses, dust, and moisture to keep a clean friction contact patch on the rotor surface. Silver zinc dichromate plating resists rust and corrosion. With a direct OE fit, there are no special modifications needed.
- Manufactured to strict tolerances for DTV and runout for smooth quiet performance
- Precision cross-drilled for maximum cooling and optimum performance
- Chamfered drill holes and rounded slots to minimize stress cracking
- Bolt-on upgrade for stock brakes, no modifications necessary
- Slotted friction surface sweeps away gasses, dust, and water
- Weight and vane count match original equipment design
- Zinc plated for protection against corrosion
- 100% dynamic mill balanced
- Sold as a pair
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 1969 | Chevrolet | Camaro | Z28 |
| 1963-1974,1977-1982 | Chevrolet | Corvette | Base |
| 1982 | Chevrolet | Corvette | Collector's Edition |
| 1978 | Chevrolet | Corvette | Indianapolis 500 Pace Car |
| 1978 | Chevrolet | Corvette | Silver Anniversary Edition |
| 1975-1976 | Chevrolet | Corvette | Stingray |
$187.10
Power Stop drilled and slotted rotors provide a bolt-on upgrade for improved brake cooling and performance. Precision cross-drilled for maximum cooling and maximum performance during extreme conditions; rounded slots sweep away gasses, dust, and moisture to keep a clean friction contact patch on the rotor surface. Silver zinc dichromate plating resists rust and corrosion. With a direct OE fit, there are no special modifications needed.
- Manufactured to strict tolerances for DTV and runout for smooth quiet performance
- Precision cross-drilled for maximum cooling and optimum performance
- Chamfered drill holes and rounded slots to minimize stress cracking
- Bolt-on upgrade for stock brakes, no modifications necessary
- Slotted friction surface sweeps away gasses, dust, and water
- Weight and vane count match original equipment design
- Zinc plated for protection against corrosion
- 100% dynamic mill balanced
- Sold as a pair
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2001 | Ford | Mustang | GT Bullitt |
| 2003-2004 | Ford | Mustang | Mach 1 |
| 1994-1999,2001,2003-2004 | Ford | Mustang | SVT Cobra |
| 2003 | Ford | Mustang | SVT Cobra 10th Anniversary |
| 2000 | Ford | Mustang | SVT Cobra R |
Decades of experience, continuous research and development, and dedication to bringing the highest quality premium friction products have led to Talon(R) Rotors. Leveraging the high quality performance of Hawk Performances(R) unique and proprietary DTC curved slot design, they are built to OE specifications, weights, and production processes, and are engineered to fit a vehicles current braking system without modification.
- Salt Spray Tested Per ISO-9227 Exceeding The 240 hrs. Requirement
- Proven Cross Drilled Designs To Optimize Thermal Efficiency
- Validated Design And Performance Through Extensive Testing
- G3000 Metallurgy Superior Automotive Casting Material
- Coated In ISO Certified Facilities In North America
- Maintain A Clean Pad Surface And Expel Away Debris
- Heat Dissipation/Strength And Improve Wet Braking
- Significantly Reduce Harmonic Resonance Issues
- All Rotors Are Balanced w/CNC Programmed
- Magni™ Coating Barrier Applied
- Engineered Machined Finished
- Precision Milled Slots
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 1990-1993,1997-2001 | Acura | Integra | GS |
| 1992-2001 | Acura | Integra | GS-R |
| 1990-2001 | Acura | Integra | LS |
| 1990-1998 | Acura | Integra | RS |
| 1995-1996 | Acura | Integra | Special Edition |
| 1990-1991,1994-1995,2001-2005 | Honda | Civic | DX |
| 1990-2005 | Honda | Civic | EX |
| 2005 | Honda | Civic | EX Special Edition |
| 2001-2005 | Honda | Civic | GX |
| 2001-2005 | Honda | Civic | HX |
| 2003-2005 | Honda | Civic | Hybrid |
| 1990-1991,1994-1996,2001-2005 | Honda | Civic | LX |
| 2005 | Honda | Civic | LX Special Edition |
| 1994-1995,1999-2000,2002-2003 | Honda | Civic | Si |
| 2004-2005 | Honda | Civic | Value Package |
| 1994-1997 | Honda | Civic del Sol | VTEC |
| 2007-2013 | Honda | Fit | Base |
| 2007-2013 | Honda | Fit | Sport |
| 2011-2014 | Honda | Insight | Base |
| 2010-2014 | Honda | Insight | EX |
| 2010-2014 | Honda | Insight | LX |
Decades of experience, continuous research and development, and dedication to bringing the highest quality premium friction products have led to Talon(R) Rotors. Leveraging the high quality performance of Hawk Performances(R) unique and proprietary DTC curved slot design, they are built to OE specifications, weights, and production processes, and are engineered to fit a vehicles current braking system without modification.
- Salt Spray Tested Per ISO-9227 Exceeding The 240 hrs. Requirement
- Proven Cross Drilled Designs To Optimize Thermal Efficiency
- Validated Design And Performance Through Extensive Testing
- G3000 Metallurgy Superior Automotive Casting Material
- Coated In ISO Certified Facilities In North America
- Maintain A Clean Pad Surface And Expel Away Debris
- Heat Dissipation/Strength And Improve Wet Braking
- Significantly Reduce Harmonic Resonance Issues
- All Rotors Are Balanced w/CNC Programmed
- Magni™ Coating Barrier Applied
- Engineered Machined Finished
- Precision Milled Slots
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 1990-1993,1997-2001 | Acura | Integra | GS |
| 1992-2001 | Acura | Integra | GS-R |
| 1990-2001 | Acura | Integra | LS |
| 1990-1998 | Acura | Integra | RS |
| 1995-1996 | Acura | Integra | Special Edition |
| 1992-1995 | Honda | Civic | EX |
| 1994-1995 | Honda | Civic | LX |
| 1992-1995,1999-2000 | Honda | Civic | Si |
| 1993-1997 | Honda | Civic del Sol | Si |
| 1994-1997 | Honda | Civic del Sol | VTEC |
| 1990-1991 | Honda | CRX | Si |
| 1988-1990 | Honda | Prelude | 2.0 S |
| 1988-1991 | Honda | Prelude | 2.0 Si |
| 1988-1989 | Honda | Prelude | 2.0 Si 4WS |
| 1990-1991 | Honda | Prelude | Si |
| 1990-1991 | Honda | Prelude | Si 4WS |
| 1990-1991 | Honda | Prelude | Si ALB |
Showing 210/1048
Explore Related Collections
- Choosing a selection results in a full page refresh.
- Opens in a new window.